summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
12 daysspi: cadence-quadspi: fix cleanup of rx_chan on failure pathsKhairul Anuar Romli1-5/+0
commit 04a8ff1bc3514808481ddebd454342ad902a3f60 upstream. Remove incorrect checks on cqspi->rx_chan that cause driver breakage during failure cleanup. Ensure proper resource freeing on the success path when operating in cqspi->use_direct_mode, preventing leaks and improving stability. Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/89765a2b94f047ded4f14babaefb7ef92ba07cb2.1751274389.git.khairul.anuar.romli@altera.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysusb: typec: tcpm: apply vbus before data bringup in tcpm_src_attachRD Babiera1-17/+17
commit bec15191d52300defa282e3fd83820f69e447116 upstream. This patch fixes Type-C compliance test TD 4.7.6 - Try.SNK DRP Connect SNKAS. tVbusON has a limit of 275ms when entering SRC_ATTACHED. Compliance testers can interpret the TryWait.Src to Attached.Src transition after Try.Snk as being in Attached.Src the entire time, so ~170ms is lost to the debounce timer. Setting the data role can be a costly operation in host mode, and when completed after 100ms can cause Type-C compliance test check TD 4.7.5.V.4 to fail. Turn VBUS on before tcpm_set_roles to meet timing requirement. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable <stable@kernel.org> Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250618230606.3272497-2-rdbabiera@google.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysusb: typec: tcpm: allow switching to mode accessory to mux properlyMichael Grzeschik1-9/+18
commit 8a50da849151e7e12b43c1d8fe7ad302223aef6b upstream. The funciton tcpm_acc_attach is not setting the proper state when calling tcpm_set_role. The function tcpm_set_role is currently only handling TYPEC_STATE_USB. For the tcpm_acc_attach to switch into other modal states tcpm_set_role needs to be extended by an extra state parameter. This patch is handling the proper state change when calling tcpm_acc_attach. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250404-ml-topic-tcpm-v1-3-b99f44badce8@pengutronix.de Stable-dep-of: bec15191d523 ("usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysusb: typec: tcpm: allow to use sink in accessory modeMichael Grzeschik1-2/+7
commit 64843d0ba96d3eae297025562111d57585273366 upstream. Since the function tcpm_acc_attach is not setting the data and role for for the sink case we extend it to check for it first. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250404-ml-topic-tcpm-v1-1-b99f44badce8@pengutronix.de Stable-dep-of: bec15191d523 ("usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysRevert "drm/gem-shmem: Use dma_buf from GEM object instance"Thomas Zimmermann1-2/+2
commit 6d496e9569983a0d7a05be6661126d0702cf94f7 upstream. This reverts commit 1a148af06000e545e714fe3210af3d77ff903c11. The dma_buf field in struct drm_gem_object is not stable over the object instance's lifetime. The field becomes NULL when user space releases the final GEM handle on the buffer object. This resulted in a NULL-pointer deref. Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer: Acquire internal references on GEM handles") only solved the problem partially. They especially don't work for buffer objects without a DRM framebuffer associated. Hence, this revert to going back to using .import_attach->dmabuf. v3: - cc stable Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Zack Rusin <zack.rusin@broadcom.com> Cc: <stable@vger.kernel.org> # v6.15+ Link: https://lore.kernel.org/r/20250715155934.150656-7-tzimmermann@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysdrm/shmem-helper: Remove obsoleted is_iomem testDmitry Osipenko1-6/+0
commit eab10538073c3ff9e21c857bd462f79f2f6f7e00 upstream. Everything that uses the mapped buffer should be agnostic to is_iomem. The only reason for the is_iomem test is that we're setting shmem->vaddr to the returned map->vaddr. Now that the shmem->vaddr code is gone, remove the obsoleted is_iomem test to clean up the code. Acked-by: Maxime Ripard <mripard@kernel.org> Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.d> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-7-dmitry.osipenko@collabora.com Stable-dep-of: 6d496e956998 ("Revert "drm/gem-shmem: Use dma_buf from GEM object instance"") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysdrm/amdgpu: Fix SDMA engine reset with logical instance IDJesse Zhang1-4/+6
commit 09b585592fa481384597c81388733aed4a04dd05 upstream. This commit makes the following improvements to SDMA engine reset handling: 1. Clarifies in the function documentation that instance_id refers to a logical ID 2. Adds conversion from logical to physical instance ID before performing reset using GET_INST(SDMA0, instance_id) macro 3. Improves error messaging to indicate when a logical instance reset fails 4. Adds better code organization with blank lines for readability The change ensures proper SDMA engine reset by using the correct physical instance ID while maintaining the logical ID interface for callers. V2: Remove harvest_config check and convert directly to physical instance (Lijo) Suggested-by: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5efa6217c239ed1ceec0f0414f9b6f6927387dfc) Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysdrm/amdgpu: Implement SDMA soft reset directly for v5.xJesse.zhang@amd.com1-1/+37
commit 5c3e7c49538e2ddad10296a318c225bbb3d37d20 upstream. This patch introduces a new function `amdgpu_sdma_soft_reset` to handle SDMA soft resets directly, rather than relying on the DPM interface. 1. **New `amdgpu_sdma_soft_reset` Function**: - Implements a soft reset for SDMA engines by directly writing to the hardware registers. - Handles SDMA versions 4.x and 5.x separately: - For SDMA 4.x, the existing `amdgpu_dpm_reset_sdma` function is used for backward compatibility. - For SDMA 5.x, the driver directly manipulates the `GRBM_SOFT_RESET` register to reset the specified SDMA instance. 2. **Integration into `amdgpu_sdma_reset_engine`**: - The `amdgpu_sdma_soft_reset` function is called during the SDMA reset process, replacing the previous call to `amdgpu_dpm_reset_sdma`. v2: r should default to an error (Alex) Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: 09b585592fa4 ("drm/amdgpu: Fix SDMA engine reset with logical instance ID") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysdrm/amdgpu: Add the new sdma function pointers for amdgpu_sdma.hJesse.zhang@amd.com1-1/+7
commit 29891842154d7ebca97a94b0d5aaae94e560f61c upstream. This patch introduces new function pointers in the amdgpu_sdma structure to handle queue stop, start and soft reset operations. These will replace the older callback mechanism. The new functions are: - stop_kernel_queue: Stops a specific SDMA queue - start_kernel_queue: Starts/Restores a specific SDMA queue - soft_reset_kernel_queue: Performs soft reset on a specific SDMA queue v2: Update stop_queue/start_queue function paramters to use ring pointer instead of device/instance(Chritian) v3: move stop_queue/start_queue to struct amdgpu_sdma_instance and rename them. (Alex) v4: rework the ordering a bit (Alex) Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: 09b585592fa4 ("drm/amdgpu: Fix SDMA engine reset with logical instance ID") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysdrm/xe: Make WA BB part of LRC BOMatthew Brost2-21/+19
commit afcad92411772a1f361339f22c49f855c6cc7d0f upstream. No idea why, but without this GuC context switches randomly fail when running IGTs in a loop. Need to follow up why this fixes the aforementioned issue but can live with a stable driver for now. Fixes: 617d824c5323 ("drm/xe: Add WA BB to capture active context utilization") Cc: stable@vger.kernel.org Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Tested-by: Shuicheng Lin <shuicheng.lin@intel.com> Link: https://lore.kernel.org/r/20250612031925.4009701-1-matthew.brost@intel.com (cherry picked from commit 3a1edef8f4b58b0ba826bc68bf4bce4bdf59ecf3) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> [ adapted xe_bo_create_pin_map() call ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysPCI/pwrctrl: Create pwrctrl devices only when CONFIG_PCI_PWRCTRL is enabledManivannan Sadhasivam1-0/+7
commit 8c493cc91f3a1102ad2f8c75ae0cf80f0a057488 upstream. If devicetree describes power supplies related to a PCI device, we unnecessarily created a pwrctrl device even if CONFIG_PCI_PWRCTL was not enabled. We only need pci_pwrctrl_create_device() when CONFIG_PCI_PWRCTRL is enabled. Compile it out when CONFIG_PCI_PWRCTRL is not enabled. When pci_pwrctrl_create_device() creates and returns a pwrctrl device, pci_scan_device() doesn't enumerate the PCI device. It assumes the pwrctrl core will rescan the bus after turning on the power. However, if CONFIG_PCI_PWRCTRL is not enabled, the rescan never happens, which breaks PCI enumeration on any system that describes power supplies in devicetree but does not use pwrctrl. Jim reported that some brcmstb platforms break this way. The brcmstb driver is still broken if CONFIG_PCI_PWRCTRL is enabled, but this commit at least allows brcmstb to work when it's NOT enabled. Fixes: 957f40d039a9 ("PCI/pwrctrl: Move creation of pwrctrl devices to pci_scan_device()") Reported-by: Jim Quinlan <james.quinlan@broadcom.com> Link: https://lore.kernel.org/r/CA+-6iNwgaByXEYD3j=-+H_PKAxXRU78svPMRHDKKci8AGXAUPg@mail.gmail.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v6.15 Link: https://patch.msgid.link/20250701064731.52901-1-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysice: Fix a null pointer dereference in ice_copy_and_init_pkg()Haoxiang Li1-0/+2
commit 4ff12d82dac119b4b99b5a78b5af3bf2474c0a36 upstream. Add check for the return value of devm_kmemdup() to prevent potential null pointer dereference. Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysgve: Fix stuck TX queue for DQ queue formatPraveen Kaligineedi1-30/+37
commit b03f15c0192b184078206760c839054ae6eb4eaa upstream. gve_tx_timeout was calculating missed completions in a way that is only relevant in the GQ queue format. Additionally, it was attempting to disable device interrupts, which is not needed in either GQ or DQ queue formats. As a result, TX timeouts with the DQ queue format likely would have triggered early resets without kicking the queue at all. This patch drops the check for pending work altogether and always kicks the queue after validating the queue has not seen a TX timeout too recently. Cc: stable@vger.kernel.org Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ") Co-developed-by: Tim Hostetler <thostet@google.com> Signed-off-by: Tim Hostetler <thostet@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20250717192024.1820931-1-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 dayse1000e: ignore uninitialized checksum word on tgpJacek Kowalski2-0/+9
commit 61114910a5f6a71d0b6ea3b95082dfe031b19dfe upstream. As described by Vitaly Lifshits: > Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the > driver cannot perform checksum validation and correction. This means > that all NVM images must leave the factory with correct checksum and > checksum valid bit set. Unfortunately some systems have left the factory with an uninitialized value of 0xFFFF at register address 0x3F (checksum word location). So on Tiger Lake platform we ignore the computed checksum when such condition is encountered. Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Tested-by: Vlad URSU <vlad@ursu.me> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 dayse1000e: disregard NVM checksum on tgp when valid checksum bit is not setJacek Kowalski1-0/+2
commit 536fd741c7ac907d63166cdae1081b1febfab613 upstream. As described by Vitaly Lifshits: > Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the > driver cannot perform checksum validation and correction. This means > that all NVM images must leave the factory with correct checksum and > checksum valid bit set. Since Tiger Lake devices were the first to have > this lock, some systems in the field did not meet this requirement. > Therefore, for these transitional devices we skip checksum update and > verification, if the valid bit is not set. Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable@vger.kernel.org Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysdpaa2-switch: Fix device reference count leak in MAC endpoint handlingMa Ke1-3/+12
commit 96e056ffba912ef18a72177f71956a5b347b5177 upstream. The fsl_mc_get_endpoint() function uses device_find_child() for localization, which implicitly calls get_device() to increment the device's reference count before returning the pointer. However, the caller dpaa2_switch_port_connect_mac() fails to properly release this reference in multiple scenarios. We should call put_device() to decrement reference count properly. As comment of device_find_child() says, 'NOTE: you will need to drop the reference with put_device() after use'. Found by code review. Cc: stable@vger.kernel.org Fixes: 84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717022309.3339976-3-make24@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysdpaa2-eth: Fix device reference count leak in MAC endpoint handlingMa Ke1-3/+12
commit ee9f3a81ab08dfe0538dbd1746f81fd4d5147fdc upstream. The fsl_mc_get_endpoint() function uses device_find_child() for localization, which implicitly calls get_device() to increment the device's reference count before returning the pointer. However, the caller dpaa2_eth_connect_mac() fails to properly release this reference in multiple scenarios. We should call put_device() to decrement reference count properly. As comment of device_find_child() says, 'NOTE: you will need to drop the reference with put_device() after use'. Found by code review. Cc: stable@vger.kernel.org Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717022309.3339976-2-make24@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysbus: fsl-mc: Fix potential double device reference in fsl_mc_get_endpoint()Ma Ke1-10/+9
commit bddbe13d36a02d5097b99cf02354d5752ad1ac60 upstream. The fsl_mc_get_endpoint() function may call fsl_mc_device_lookup() twice, which would increment the device's reference count twice if both lookups find a device. This could lead to a reference count leak. Found by code review. Cc: stable@vger.kernel.org Fixes: 1ac210d128ef ("bus: fsl-mc: add the fsl_mc_get_endpoint function") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 8567494cebe5 ("bus: fsl-mc: rescan devices if endpoint not found") Link: https://patch.msgid.link/20250717022309.3339976-1-make24@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysi2c: virtio: Avoid hang by using interruptible completion waitViresh Kumar1-7/+8
commit a663b3c47ab10f66130818cf94eb59c971541c3f upstream. The current implementation uses wait_for_completion(), which can cause the caller to hang indefinitely if the transfer never completes. Switch to wait_for_completion_interruptible() so that the operation can be interrupted by signals. Fixes: 84e1d0bf1d71 ("i2c: virtio: disable timeout handling") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: <stable@vger.kernel.org> # v5.16+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/b8944e9cab8eb959d888ae80add6f2a686159ba2.1751541962.git.viresh.kumar@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysi2c: tegra: Fix reset error handling with ACPIAkhil R1-23/+1
commit 56344e241c543f17e8102fa13466ad5c3e7dc9ff upstream. The acpi_evaluate_object() returns an ACPI error code and not Linux one. For the some platforms the err will have positive code which may be interpreted incorrectly. Use device_reset() for reset control which handles it correctly. Fixes: bd2fdedbf2ba ("i2c: tegra: Add the ACPI support") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Cc: <stable@vger.kernel.org> # v5.17+ Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250710131206.2316-2-akhilrajeev@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysi2c: qup: jump out of the loop in case of timeoutYang Xiwen1-1/+3
commit a7982a14b3012527a9583d12525cd0dc9f8d8934 upstream. Original logic only sets the return value but doesn't jump out of the loop if the bus is kept active by a client. This is not expected. A malicious or buggy i2c client can hang the kernel in this case and should be avoided. This is observed during a long time test with a PCA953x GPIO extender. Fix it by changing the logic to not only sets the return value, but also jumps out of the loop and return to the caller with -ETIMEDOUT. Fixes: fbfab1ab0658 ("i2c: qup: reorganization of driver code to remove polling for qup v1") Signed-off-by: Yang Xiwen <forbidden405@outlook.com> Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250616-qca-i2c-v1-1-2a8d37ee0a30@outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysdrm/sched: Remove optimization that causes hang when killing dependent jobsLin.Cao1-19/+2
commit 15f77764e90a713ee3916ca424757688e4f565b9 upstream. When application A submits jobs and application B submits a job with a dependency on A's fence, the normal flow wakes up the scheduler after processing each job. However, the optimization in drm_sched_entity_add_dependency_cb() uses a callback that only clears dependencies without waking up the scheduler. When application A is killed before its jobs can run, the callback gets triggered but only clears the dependency without waking up the scheduler, causing the scheduler to enter sleep state and application B to hang. Remove the optimization by deleting drm_sched_entity_clear_dep() and its usage, ensuring the scheduler is always woken up when dependencies are cleared. Fixes: 777dbd458c89 ("drm/amdgpu: drop a dummy wakeup scheduler") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Lin.Cao <lincao12@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://lore.kernel.org/r/20250717084453.921097-1-lincao12@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysdrm/amdgpu: Reset the clear flag in buddy during resumeArunpravin Paneer Selvam4-0/+63
commit 95a16160ca1d75c66bf7a1c5e0bcaffb18e7c7fc upstream. - Added a handler in DRM buddy manager to reset the cleared flag for the blocks in the freelist. - This is necessary because, upon resuming, the VRAM becomes cluttered with BIOS data, yet the VRAM backend manager believes that everything has been cleared. v2: - Add lock before accessing drm_buddy_clear_reset_blocks()(Matthew Auld) - Force merge the two dirty blocks.(Matthew Auld) - Add a new unit test case for this issue.(Matthew Auld) - Having this function being able to flip the state either way would be good. (Matthew Brost) v3(Matthew Auld): - Do merge step first to avoid the use of extra reset flag. Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Cc: stable@vger.kernel.org Fixes: a68c7eaa7a8f ("drm/amdgpu: Enable clear page functionality") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3812 Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250716075125.240637-2-Arunpravin.PaneerSelvam@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysRevert "drm/gem-dma: Use dma_buf from GEM object instance"Thomas Zimmermann1-1/+1
commit 1918e79be908b8a2c8757640289bc196c14d928a upstream. This reverts commit e8afa1557f4f963c9a511bd2c6074a941c308685. The dma_buf field in struct drm_gem_object is not stable over the object instance's lifetime. The field becomes NULL when user space releases the final GEM handle on the buffer object. This resulted in a NULL-pointer deref. Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer: Acquire internal references on GEM handles") only solved the problem partially. They especially don't work for buffer objects without a DRM framebuffer associated. Hence, this revert to going back to using .import_attach->dmabuf. v3: - cc stable Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Zack Rusin <zack.rusin@broadcom.com> Cc: <stable@vger.kernel.org> # v6.15+ Link: https://lore.kernel.org/r/20250715155934.150656-8-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysRevert "drm/gem-framebuffer: Use dma_buf from GEM object instance"Thomas Zimmermann1-2/+6
commit 2712ca878b688682ac2ce02aefc413fc76019cd9 upstream. This reverts commit cce16fcd7446dcff7480cd9d2b6417075ed81065. The dma_buf field in struct drm_gem_object is not stable over the object instance's lifetime. The field becomes NULL when user space releases the final GEM handle on the buffer object. This resulted in a NULL-pointer deref. Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer: Acquire internal references on GEM handles") only solved the problem partially. They especially don't work for buffer objects without a DRM framebuffer associated. Hence, this revert to going back to using .import_attach->dmabuf. v3: - cc stable Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Zack Rusin <zack.rusin@broadcom.com> Cc: <stable@vger.kernel.org> # v6.15+ Link: https://lore.kernel.org/r/20250715155934.150656-6-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysRevert "drm/prime: Use dma_buf from GEM object instance"Thomas Zimmermann1-1/+7
commit fb4ef4a52b79a22ad382bfe77332642d02aef773 upstream. This reverts commit f83a9b8c7fd0557b0c50784bfdc1bbe9140c9bf8. The dma_buf field in struct drm_gem_object is not stable over the object instance's lifetime. The field becomes NULL when user space releases the final GEM handle on the buffer object. This resulted in a NULL-pointer deref. Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer: Acquire internal references on GEM handles") only solved the problem partially. They especially don't work for buffer objects without a DRM framebuffer associated. Hence, this revert to going back to using .import_attach->dmabuf. v3: - cc stable Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Zack Rusin <zack.rusin@broadcom.com> Cc: <stable@vger.kernel.org> # v6.15+ Link: https://lore.kernel.org/r/20250715155934.150656-5-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysdrm/i915/dp: Fix 2.7 Gbps DP_LINK_BW value on g4xVille Syrjälä1-0/+6
commit 9e0c433d0c05fde284025264b89eaa4ad59f0a3e upstream. On g4x we currently use the 96MHz non-SSC refclk, which can't actually generate an exact 2.7 Gbps link rate. In practice we end up with 2.688 Gbps which seems to be close enough to actually work, but link training is currently failing due to miscalculating the DP_LINK_BW value (we calcualte it directly from port_clock which reflects the actual PLL outpout frequency). Ideas how to fix this: - nudge port_clock back up to 270000 during PLL computation/readout - track port_clock and the nominal link rate separately so they might differ a bit - switch to the 100MHz refclk, but that one should be SSC so perhaps not something we want While we ponder about a better solution apply some band aid to the immediate issue of miscalculated DP_LINK_BW value. With this I can again use 2.7 Gbps link rate on g4x. Cc: stable@vger.kernel.org Fixes: 665a7b04092c ("drm/i915: Feed the DPLL output freq back into crtc_state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit a8b874694db5cae7baaf522756f87acd956e6e66) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysplatform/x86: ideapad-laptop: Fix kbd backlight not remembered among bootsRong Zhang1-1/+1
commit e10981075adce203eac0be866389309eeb8ef11e upstream. On some models supported by ideapad-laptop, the HW/FW can remember the state of keyboard backlight among boots. However, it is always turned off while shutting down, as a side effect of the LED class device unregistering sequence. This is inconvenient for users who always prefer turning on the keyboard backlight. Thus, set LED_RETAIN_AT_SHUTDOWN on the LED class device so that the state of keyboard backlight gets remembered, which also aligns with the behavior of manufacturer utilities on Windows. Fixes: 503325f84bc0 ("platform/x86: ideapad-laptop: add keyboard backlight control support") Cc: stable@vger.kernel.org Signed-off-by: Rong Zhang <i@rong.moe> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250707163808.155876-3-i@rong.moe Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysplatform/x86: ideapad-laptop: Fix FnLock not remembered among bootsRong Zhang1-1/+1
commit 9533b789df7e8d273543a5991aec92447be043d7 upstream. On devices supported by ideapad-laptop, the HW/FW can remember the FnLock state among boots. However, since the introduction of the FnLock LED class device, it is turned off while shutting down, as a side effect of the LED class device unregistering sequence. Many users always turn on FnLock because they use function keys much more frequently than multimedia keys. The behavior change is inconvenient for them. Thus, set LED_RETAIN_AT_SHUTDOWN on the LED class device so that the FnLock state gets remembered, which also aligns with the behavior of manufacturer utilities on Windows. Fixes: 07f48f668fac ("platform/x86: ideapad-laptop: add FnLock LED class device") Cc: stable@vger.kernel.org Signed-off-by: Rong Zhang <i@rong.moe> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250707163808.155876-2-i@rong.moe Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysplatform/x86: alienware-wmi-wmax: Fix `dmi_system_id` arrayKurt Borja1-0/+1
commit 8346c6af27f1c1410eb314f4be5875fdf1579a10 upstream. Add missing empty member to `awcc_dmi_table`. Cc: stable@vger.kernel.org Fixes: 6d7f1b1a5db6 ("platform/x86: alienware-wmi: Split DMI table") Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250707-dmi-fix-v1-1-6730835d824d@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 daysnet: hns3: default enable tx bounce buffer when smmu enabledJijie Shao2-0/+33
[ Upstream commit 49ade8630f36e9dca2395592cfb0b7deeb07e746 ] The SMMU engine on HIP09 chip has a hardware issue. SMMU pagetable prefetch features may prefetch and use a invalid PTE even the PTE is valid at that time. This will cause the device trigger fake pagefaults. The solution is to avoid prefetching by adding a SYNC command when smmu mapping a iova. But the performance of nic has a sharp drop. Then we do this workaround, always enable tx bounce buffer, avoid mapping/unmapping on TX path. This issue only affects HNS3, so we always enable tx bounce buffer when smmu enabled to improve performance. Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-5-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysnet: hns3: fixed vf get max channels bugJian Shen1-5/+1
[ Upstream commit b3e75c0bcc53f647311960bc1b0970b9b480ca5a ] Currently, the queried maximum of vf channels is the maximum of channels supported by each TC. However, the actual maximum of channels is the maximum of channels supported by the device. Fixes: 849e46077689 ("net: hns3: add ethtool_ops.get_channels support for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-4-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysnet: hns3: disable interrupt when ptp init failedYonglong Liu1-3/+6
[ Upstream commit cde304655f25d94a996c45b0f9956e7dcc2bc4c0 ] When ptp init failed, we'd better disable the interrupt and clear the flag, to avoid early report interrupt at next probe. Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-3-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysnet: hns3: fix concurrent setting vlan filter issueJian Shen1-15/+21
[ Upstream commit 4555f8f8b6aa46940f55feb6a07704c2935b6d6e ] The vport->req_vlan_fltr_en may be changed concurrently by function hclge_sync_vlan_fltr_state() called in periodic work task and function hclge_enable_vport_vlan_filter() called by user configuration. It may cause the user configuration inoperative. Fixes it by protect the vport->req_vlan_fltr by vport_lock. Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-2-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayss390/ism: fix concurrency management in ism_cmd()Halil Pasic1-0/+3
[ Upstream commit 897e8601b9cff1d054cdd53047f568b0e1995726 ] The s390x ISM device data sheet clearly states that only one request-response sequence is allowable per ISM function at any point in time. Unfortunately as of today the s390/ism driver in Linux does not honor that requirement. This patch aims to rectify that. This problem was discovered based on Aliaksei's bug report which states that for certain workloads the ISM functions end up entering error state (with PEC 2 as seen from the logs) after a while and as a consequence connections handled by the respective function break, and for future connection requests the ISM device is not considered -- given it is in a dysfunctional state. During further debugging PEC 3A was observed as well. A kernel message like [ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a is a reliable indicator of the stated function entering error state with PEC 2. Let me also point out that a kernel message like [ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery is a reliable indicator that the ISM function won't be auto-recovered because the ISM driver currently lacks support for it. On a technical level, without this synchronization, commands (inputs to the FW) may be partially or fully overwritten (corrupted) by another CPU trying to issue commands on the same function. There is hard evidence that this can lead to DMB token values being used as DMB IOVAs, leading to PEC 2 PCI events indicating invalid DMA. But this is only one of the failure modes imaginable. In theory even completely losing one command and executing another one twice and then trying to interpret the outputs as if the command we intended to execute was actually executed and not the other one is also possible. Frankly, I don't feel confident about providing an exhaustive list of possible consequences. Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory") Reported-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com> Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com> Tested-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722161817.1298473-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysdrm/bridge: ti-sn65dsi86: Remove extra semicolon in ti_sn_bridge_probe()Douglas Anderson1-1/+1
[ Upstream commit 15a7ca747d9538c2ad8b0c81dd4c1261e0736c82 ] As reported by the kernel test robot, a recent patch introduced an unnecessary semicolon. Remove it. Fixes: 55e8ff842051 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506301704.0SBj6ply-lkp@intel.com/ Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250714130631.1.I1cfae3222e344a3b3c770d079ee6b6f7f3b5d636@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
12 dayscan: netlink: can_changelink(): fix NULL pointer deref of struct ↵Marc Kleine-Budde2-3/+21
can_priv::do_set_mode [ Upstream commit c1f3f9797c1f44a762e6f5f72520b2e520537b52 ] Andrei Lalaev reported a NULL pointer deref when a CAN device is restarted from Bus Off and the driver does not implement the struct can_priv::do_set_mode callback. There are 2 code path that call struct can_priv::do_set_mode: - directly by a manual restart from the user space, via can_changelink() - delayed automatic restart after bus off (deactivated by default) To prevent the NULL pointer deference, refuse a manual restart or configure the automatic restart delay in can_changelink() and report the error via extack to user space. As an additional safety measure let can_restart() return an error if can_priv::do_set_mode is not set instead of dereferencing it unchecked. Reported-by: Andrei Lalaev <andrey.lalaev@gmail.com> Closes: https://lore.kernel.org/all/20250714175520.307467-1-andrey.lalaev@gmail.com Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://patch.msgid.link/20250718-fix-nullptr-deref-do_set_mode-v1-1-0b520097bb96@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysi40e: When removing VF MAC filters, only check PF-set MACJamie Bainbridge1-2/+2
[ Upstream commit 5a0df02999dbe838c3feed54b1d59e9445f68b89 ] When the PF is processing an Admin Queue message to delete a VF's MACs from the MAC filter, we currently check if the PF set the MAC and if the VF is trusted. This results in undesirable behaviour, where if a trusted VF with a PF-set MAC sets itself down (which sends an AQ message to delete the VF's MAC filters) then the VF MAC is erased from the interface. This results in the VF losing its PF-set MAC which should not happen. There is no need to check for trust at all, because an untrusted VF cannot change its own MAC. The only check needed is whether the PF set the MAC. If the PF set the MAC, then don't erase the MAC on link-down. Resolve this by changing the deletion check only for PF-set MAC. (the out-of-tree driver has also intentionally removed the check for VF trust here with OOT driver version 2.26.8, this changes the Linux kernel driver behaviour and comment to match the OOT driver behaviour) Fixes: ea2a1cfc3b201 ("i40e: Fix VF MAC filter removal") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysi40e: report VF tx_dropped with tx_errors instead of tx_discardsDennis Chen1-1/+1
[ Upstream commit 50b2af451597ca6eefe9d4543f8bbf8de8aa00e7 ] Currently the tx_dropped field in VF stats is not updated correctly when reading stats from the PF. This is because it reads from i40e_eth_stats.tx_discards which seems to be unused for per VSI stats, as it is not updated by i40e_update_eth_stats() and the corresponding register, GLV_TDPC, is not implemented[1]. Use i40e_eth_stats.tx_errors instead, which is actually updated by i40e_update_eth_stats() by reading from GLV_TEPC. To test, create a VF and try to send bad packets through it: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ cat test.py from scapy.all import * vlan_pkt = Ether(dst="ff:ff:ff:ff:ff:ff") / Dot1Q(vlan=999) / IP(dst="192.168.0.1") / ICMP() ttl_pkt = IP(dst="8.8.8.8", ttl=0) / ICMP() print("Send packet with bad VLAN tag") sendp(vlan_pkt, iface="enp2s0f0v0") print("Send packet with TTL=0") sendp(ttl_pkt, iface="enp2s0f0v0") $ ip -s link show dev enp2s0f0 16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off RX: bytes packets mcast bcast dropped 0 0 0 0 0 TX: bytes packets dropped 0 0 0 $ python test.py Send packet with bad VLAN tag . Sent 1 packets. Send packet with TTL=0 . Sent 1 packets. $ ip -s link show dev enp2s0f0 16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off RX: bytes packets mcast bcast dropped 0 0 0 0 0 TX: bytes packets dropped 0 0 0 A packet with non-existent VLAN tag and a packet with TTL = 0 are sent, but tx_dropped is not incremented. After patch: $ ip -s link show dev enp2s0f0 19: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 vf 0 link/ether 4a:b7:3d:37:f7:56 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off RX: bytes packets mcast bcast dropped 0 0 0 0 0 TX: bytes packets dropped 0 0 2 Fixes: dc645daef9af5bcbd9c ("i40e: implement VF stats NDO") Signed-off-by: Dennis Chen <dechen@redhat.com> Link: https://www.intel.com/content/www/us/en/content-details/596333/intel-ethernet-controller-x710-tm4-at2-carlsville-datasheet.html Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysnet/mlx5: E-Switch, Fix peer miss rules to use peer eswitchShahar Shitrit1-54/+54
[ Upstream commit 5b4c56ad4da0aa00b258ab50b1f5775b7d3108c7 ] In the original design, it is assumed local and peer eswitches have the same number of vfs. However, in new firmware, local and peer eswitches can have different number of vfs configured by mlxconfig. In such configuration, it is incorrect to derive the number of vfs from the local device's eswitch. Fix this by updating the peer miss rules add and delete functions to use the peer device's eswitch and vf count instead of the local device's information, ensuring correct behavior regardless of vf configuration differences. Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1752753970-261832-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysnet/mlx5: Fix memory leak in cmd_exec()Chiara Meiohas1-2/+2
[ Upstream commit 3afa3ae3db52e3c216d77bd5907a5a86833806cc ] If cmd_exec() is called with callback and mlx5_cmd_invoke() returns an error, resources allocated in cmd_exec() will not be freed. Fix the code to release the resources if mlx5_cmd_invoke() returns an error. Fixes: f086470122d5 ("net/mlx5: cmdif, Return value improvements") Reported-by: Alex Tereshkin <atereshkin@nvidia.com> Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1752753970-261832-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysnet: ti: icssg-prueth: Fix buffer allocation for ICSSGHimanshu Mittal5-73/+190
[ Upstream commit 6e86fb73de0fe3ec5cdcd5873ad1d6005f295b64 ] Fixes overlapping buffer allocation for ICSSG peripheral used for storing packets to be received/transmitted. There are 3 buffers: 1. Buffer for Locally Injected Packets 2. Buffer for Forwarding Packets 3. Buffer for Host Egress Packets In existing allocation buffers for 2. and 3. are overlapping causing packet corruption. Packet corruption observations: During tcp iperf testing, due to overlapping buffers the received ack packet overwrites the packet to be transmitted. So, we see packets on wire with the ack packet content inside the content of next TCP packet from sender device. Details for AM64x switch mode: -> Allocation by existing driver: +---------+-------------------------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------+--------------+--------+------+--------------+--------+ | | Slot | Base Address | Size | Slot | Base Address | Size | |---------+------+--------------+--------+------+--------------+--------+ | | 0 | 70000000 | 0x2000 | 0 | 70010000 | 0x2000 | | | 1 | 70002000 | 0x2000 | 1 | 70012000 | 0x2000 | | | 2 | 70004000 | 0x2000 | 2 | 70014000 | 0x2000 | | FWD | 3 | 70006000 | 0x2000 | 3 | 70016000 | 0x2000 | | Buffers | 4 | 70008000 | 0x2000 | 4 | 70018000 | 0x2000 | | | 5 | 7000A000 | 0x2000 | 5 | 7001A000 | 0x2000 | | | 6 | 7000C000 | 0x2000 | 6 | 7001C000 | 0x2000 | | | 7 | 7000E000 | 0x2000 | 7 | 7001E000 | 0x2000 | +---------+------+--------------+--------+------+--------------+--------+ | | 8 | 70020000 | 0x1000 | 8 | 70028000 | 0x1000 | | | 9 | 70021000 | 0x1000 | 9 | 70029000 | 0x1000 | | | 10 | 70022000 | 0x1000 | 10 | 7002A000 | 0x1000 | | Our | 11 | 70023000 | 0x1000 | 11 | 7002B000 | 0x1000 | | LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 | | Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 | | | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 | | | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ | | 16 | 70024000 | 0x1000 | 16 | 7002C000 | 0x1000 | | | 17 | 70025000 | 0x1000 | 17 | 7002D000 | 0x1000 | | | 18 | 70026000 | 0x1000 | 18 | 7002E000 | 0x1000 | | Their | 19 | 70027000 | 0x1000 | 19 | 7002F000 | 0x1000 | | LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 | | Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 | | | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 | | | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ --> here 16, 17, 18, 19 overlapping with below express buffer +-----+-----------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------------+----------+------------+----------+ | | Start addr | End addr | Start addr | End addr | +-----+------------+----------+------------+----------+ | EXP | 70024000 | 70028000 | 7002C000 | 70030000 | <-- Overlapping | PRE | 70030000 | 70033800 | 70034000 | 70037800 | +-----+------------+----------+------------+----------+ +---------------------+----------+----------+ | | SLICE 0 | SLICE 1 | +---------------------+----------+----------+ | Default Drop Offset | 00000000 | 00000000 | <-- Field not configured +---------------------+----------+----------+ -> Allocation this patch brings: +---------+-------------------------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------+--------------+--------+------+--------------+--------+ | | Slot | Base Address | Size | Slot | Base Address | Size | |---------+------+--------------+--------+------+--------------+--------+ | | 0 | 70000000 | 0x2000 | 0 | 70040000 | 0x2000 | | | 1 | 70002000 | 0x2000 | 1 | 70042000 | 0x2000 | | | 2 | 70004000 | 0x2000 | 2 | 70044000 | 0x2000 | | FWD | 3 | 70006000 | 0x2000 | 3 | 70046000 | 0x2000 | | Buffers | 4 | 70008000 | 0x2000 | 4 | 70048000 | 0x2000 | | | 5 | 7000A000 | 0x2000 | 5 | 7004A000 | 0x2000 | | | 6 | 7000C000 | 0x2000 | 6 | 7004C000 | 0x2000 | | | 7 | 7000E000 | 0x2000 | 7 | 7004E000 | 0x2000 | +---------+------+--------------+--------+------+--------------+--------+ | | 8 | 70010000 | 0x1000 | 8 | 70050000 | 0x1000 | | | 9 | 70011000 | 0x1000 | 9 | 70051000 | 0x1000 | | | 10 | 70012000 | 0x1000 | 10 | 70052000 | 0x1000 | | Our | 11 | 70013000 | 0x1000 | 11 | 70053000 | 0x1000 | | LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 | | Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 | | | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 | | | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ | | 16 | 70014000 | 0x1000 | 16 | 70054000 | 0x1000 | | | 17 | 70015000 | 0x1000 | 17 | 70055000 | 0x1000 | | | 18 | 70016000 | 0x1000 | 18 | 70056000 | 0x1000 | | Their | 19 | 70017000 | 0x1000 | 19 | 70057000 | 0x1000 | | LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 | | Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 | | | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 | | | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ +-----+-----------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------------+----------+------------+----------+ | | Start addr | End addr | Start addr | End addr | +-----+------------+----------+------------+----------+ | EXP | 70018000 | 7001C000 | 70058000 | 7005C000 | | PRE | 7001C000 | 7001F800 | 7005C000 | 7005F800 | +-----+------------+----------+------------+----------+ +---------------------+----------+----------+ | | SLICE 0 | SLICE 1 | +---------------------+----------+----------+ | Default Drop Offset | 7001F800 | 7005F800 | +---------------------+----------+----------+ Rootcause: missing buffer configuration for Express frames in function: prueth_fw_offload_buffer_setup() Details: Driver implements two distinct buffer configuration functions that are invoked based on the driver state and ICSSG firmware:- - prueth_fw_offload_buffer_setup() - prueth_emac_buffer_setup() During initialization, driver creates standard network interfaces (netdevs) and configures buffers via prueth_emac_buffer_setup(). This function properly allocates and configures all required memory regions including: - LI buffers - Express packet buffers - Preemptible packet buffers However, when the driver transitions to an offload mode (switch/HSR/PRP), buffer reconfiguration is handled by prueth_fw_offload_buffer_setup(). This function does not reconfigure the buffer regions required for Express packets, leading to incorrect buffer allocation. Fixes: abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware") Signed-off-by: Himanshu Mittal <h-mittal1@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717094220.546388-1-h-mittal1@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysstaging: vchiq_arm: Make vchiq_shutdown never failStefan Wahren1-2/+1
[ Upstream commit f2b8ebfb867011ddbefbdf7b04ad62626cbc2afd ] Most of the users of vchiq_shutdown ignore the return value, which is bad because this could lead to resource leaks. So instead of changing all calls to vchiq_shutdown, it's easier to make vchiq_shutdown never fail. Fixes: 71bad7f08641 ("staging: add bcm2708 vchiq driver") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250715161108.3411-4-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysplatform/x86: Fix initialization order for firmware_attributes_classTorsten Hilbrich1-1/+2
[ Upstream commit 2bfe3ae1aa45f8b61cb0dc462114fd0c9636ad32 ] The think-lmi driver uses the firwmare_attributes_class. But this class is registered after think-lmi, causing the "think-lmi" directory in "/sys/class/firmware-attributes" to be missing when the driver is compiled as builtin. Fixes: 55922403807a ("platform/x86: think-lmi: Directly use firmware_attributes_class") Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Link: https://lore.kernel.org/r/7dce5f7f-c348-4350-ac53-d14a8e1e8034@secunet.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysplatform/mellanox: mlxbf-pmc: Use kstrtobool() to check 0/1 inputShravan Kumar Ramani1-6/+4
[ Upstream commit 0e2cebd72321caeef84b6ba7084e85be0287fb4b ] For setting the enable value, the input should be 0 or 1 only. Use kstrtobool() in place of kstrtoint() in mlxbf_pmc_enable_store() to accept only valid input. Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3") Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/2ee618c59976bcf1379d5ddce2fc60ab5014b3a9.1751380187.git.shravankr@nvidia.com [ij: split kstrbool() change to own commit.] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysplatform/mellanox: mlxbf-pmc: Validate event/enable inputShravan Kumar Ramani1-1/+4
[ Upstream commit f8c1311769d3b2c82688b294b4ae03e94f1c326d ] Before programming the event info, validate the event number received as input by checking if it exists in the event_list. Also fix a typo in the comment for mlxbf_pmc_get_event_name() to correctly mention that it returns the event name when taking the event number as input, and not the other way round. Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3") Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/2ee618c59976bcf1379d5ddce2fc60ab5014b3a9.1751380187.git.shravankr@nvidia.com [ij: split kstrbool() change to own commit.] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysplatform/mellanox: mlxbf-pmc: Remove newline char from event name inputShravan Kumar Ramani1-1/+9
[ Upstream commit 44e6ca8faeeed12206f3e7189c5ac618b810bb9c ] Since the input string passed via the command line appends a newline char, it needs to be removed before comparison with the event_list. Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver") Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/4978c18e33313b48fa2ae7f3aa6dbcfce40877e4.1751380187.git.shravankr@nvidia.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysregmap: fix potential memory leak of regmap_busAbdun Nihaal1-0/+2
[ Upstream commit c871c199accb39d0f4cb941ad0dccabfc21e9214 ] When __regmap_init() is called from __regmap_init_i2c() and __regmap_init_spi() (and their devm versions), the bus argument obtained from regmap_get_i2c_bus() and regmap_get_spi_bus(), may be allocated using kmemdup() to support quirks. In those cases, the bus->free_on_exit field is set to true. However, inside __regmap_init(), buf is not freed on any error path. This could lead to a memory leak of regmap_bus when __regmap_init() fails. Fix that by freeing bus on error path when free_on_exit is set. Fixes: ea030ca68819 ("regmap-i2c: Set regmap max raw r/w from quirks") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Link: https://patch.msgid.link/20250626172823.18725-1-abdun.nihaal@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysiio: adc: ad7949: use spi_is_bpw_supported()David Lechner1-4/+3
[ Upstream commit 7b86482632788acd48d7b9ee1867f5ad3a32ccbb ] Use spi_is_bpw_supported() instead of directly accessing spi->controller ->bits_per_word_mask. bits_per_word_mask may be 0, which implies that 8-bits-per-word is supported. spi_is_bpw_supported() takes this into account while spi_ctrl_mask == SPI_BPW_MASK(8) does not. Fixes: 0b2a740b424e ("iio: adc: ad7949: enable use with non 14/16-bit controllers") Closes: https://lore.kernel.org/linux-spi/c8b8a963-6cef-4c9b-bfef-dab2b7bd0b0f@sirena.org.uk/ Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://patch.msgid.link/20250611-iio-adc-ad7949-use-spi_is_bpw_supported-v1-1-c4e15bfd326e@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
12 daysinterconnect: icc-clk: destroy nodes in case of memory allocation failuresGabor Juhos1-0/+2
[ Upstream commit 618c810a7b2163517ab1875bd56b633ca3cb3328 ] When memory allocation fails during creating the name of the nodes in icc_clk_register(), the code continues on the error path and it calls icc_nodes_remove() to destroy the already created nodes. However that function only destroys the nodes which were already added to the provider and the newly created nodes are never destroyed in case of error. In order to avoid a memory leaks, change the code to destroy the newly created nodes explicitly in case of memory allocation failures. Fixes: 44c5aa73ccd1 ("interconnect: icc-clk: check return values of devm_kasprintf()") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250625-icc-clk-memleak-fix-v1-1-4151484cd24f@gmail.com Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>