| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit de2942828e7670526289f098df7e50b112e8ff1e ]
The interrupt controller found on RZ/G3E doesn't provide any facility to
configure the wakeup sources. That's the reason why the driver lacks the
irq_set_wake() callback for the interrupt chip.
But this prevent to properly enter power management states like "suspend to
idle".
Enable the flags IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND so the
interrupt suspend logic can handle the chip correctly.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250701105923.52151-1-biju.das.jz@bp.renesas.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4734c8b46b901cff2feda8b82abc710b65dc31c1 ]
When a GHES (Generic Hardware Error Source) triggers a panic, add the
TAINT_MACHINE_CHECK taint flag to the kernel. This explicitly marks the
kernel as tainted due to a machine check event, improving diagnostics
and post-mortem analysis. The taint is set with LOCKDEP_STILL_OK to
indicate lockdep remains valid.
At large scale deployment, this helps to quickly determine panics that
are coming due to hardware failures.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250702-add_tain-v1-1-9187b10914b9@debian.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db58532188ebf51d52b1d7693d9e94c76b926e9f ]
Many mobile phones feature multi-card tray designs, where the same
tray is used for both SD and SIM cards. If the SD card is placed
at the outermost location in the tray, the SIM card may come in
contact with SD card power-supply while removing the tray, possibly
resulting in SIM damage.
To prevent that, make sure the SD card is really inserted by reading
the Card Detect pin state. If it's not, turn off the power in
sdhci_msm_check_power_status() and also set the BUS_FAIL power state
on the controller as part of pwr_irq handling for BUS_ON request.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250701100659.3310386-1-quic_sartgarg@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13edf7539211d8f7d0068ce3ed143005f1da3547 ]
Initialization of the local acpi_object in acpi_processor_get_info()
only sets the first 4 bytes to zero and is thus incomplete. This is
indicated by messages like:
acpi ACPI0007:be: Invalid PBLK length [166288104]
Fix this by initializing all 16 bytes of the processor member of that
union.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://patch.msgid.link/20250703124215.12522-1-sebott@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a4aabc27e95674837f2e25f4ef340c0469e6203 ]
According to POSIX spec, EAGAIN returned by read with O_NONBLOCK set
means the read would block. Hence, the common implementation in
nonblocking model will poll the file when the nonblocking read returns
EAGAIN. However, when the target file is thermal zone, this mechanism
will totally malfunction because thermal zone doesn't implement sysfs
notification and thus the poll will never return.
For example, the read in Golang implemnts such method and sometimes
hangs at reading some thermal zones via sysfs.
Change to return -ENODATA instead of -EAGAIN to userspace.
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://patch.msgid.link/20250620-temp-v3-1-6becc6aeb66c@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 89d9cec3b1e9c49bae9375a2db6dc49bc7468af0 ]
Clear power.needs_force_resume in pm_runtime_reinit() in case it has
been set by pm_runtime_force_suspend() invoked from a driver remove
callback.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/9495163.CDJkKcVGEf@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78eb18020a88a4eed15f5af7700ed570642ff8f1 ]
The IVC code is library code that other drivers need to select if they
need that library. However, if the symbol is user-selectable this can
lead to conflicts.
Fix this by making the symbol only selectable for COMPILE_TEST and add
a select TEGRA_IVC to TEGRA_BPMP, which is currently the only user.
Link: https://lore.kernel.org/r/20250506133118.1011777-10-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
during resume
[ Upstream commit 9a0658d3991e6c82df87584b253454842f22f965 ]
Fix a race condition where a second suspend notification from another
SCMI agent wakes the system before SCMI_SYSPOWER_IDLE is set, leading
to ignored suspend requests. This is due to interrupts triggering early
execution of `scmi_userspace_notifier()` before the SCMI state is updated.
To resolve this, set SCMI_SYSPOWER_IDLE earlier in the device resume
path, prior to `thaw_processes()`. This ensures the SCMI state is
correct when the notifier runs, allowing the system to suspend again
as expected.
On some platforms using SCMI, SCP cannot distinguish between CPU idle
and suspend since both result in cluster power-off. By explicitly setting
the idle state early, the Linux SCMI agent can correctly re-suspend in
response to external notifications.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250704-scmi-pm-v2-2-9316cec2f9cc@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3db5648c4d608b5483470efc1da9780b081242dd ]
Commit 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM
handler and context") introduced non-essential printing "Failed to find
VA for GUID: xxxx, PA: 0x0" which may confuse users to think that
something wrong is going on while it is not the case.
According to the PRM Spec Section 4.1.2 [1], both static data buffer
address and ACPI parameter buffer address may be NULL if they are not
needed, so there is no need to print out the "Failed to find VA ... "
in those cases.
Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1]
Signed-off-by: Zhu Qiyu <qiyuzhu2@amd.com>
Link: https://patch.msgid.link/20250704014104.82524-1-qiyuzhu2@amd.com
[ rjw: Edits in new comments, subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a0b2a6bbff8c26aafdecd320f38f52c341d5cafa ]
regmap_update_bits() can fail, check its return value like we do
elsewhere in the driver.
Link: https://lore.kernel.org/r/20250707-gpiochip-set-rv-gpio-round4-v1-2-35668aaaf6d2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a2f15c5a8e017d0951e6dc62aa7b5b634f56881 ]
Fix overallocating the size of the scan buffer by converting bits to
bytes. The size is meant to be in bytes, so scanbits needs to be
divided by 8.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250701-iio-adc-ad7173-add-spi-offload-support-v3-1-42abb83e3dac@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8e157ff2df46ddabd930815d196895976227831 ]
Certain TEMP_ALARM GEN2 PMIC peripherals need over-temperature stage 2
automatic PMIC partial shutdown. This will ensure that in the event of
reaching the hotter stage 3 over-temperature threshold, repeated faults
will be avoided during the automatic PMIC hardware full shutdown.
Modify the stage 2 shutdown control logic to ensure that stage 2
shutdown is enabled on all affected PMICs. Read the digital major
and minor revision registers to identify these PMICs.
Signed-off-by: David Collins <david.collins@oss.qualcomm.com>
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250710224555.3047790-2-anjelique.melendez@oss.qualcomm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b1dc7f097b78eb8d25b071ead2384b07a549692b ]
Clear the ECC error and counter registers during initialization/probe to avoid
reporting stale errors that may have occurred before EDAC registration.
For that, unify the Zynq and ZynqMP ECC state reading paths and simplify the
code.
[ bp: Massage commit message.
Fix an -Wsometimes-uninitialized warning as reported by
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507141048.obUv3ZUm-lkp@intel.com ]
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250713050753.7042-1-shubhrajyoti.datta@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 914cc799b28f17d369d5b4db3b941957d18157e8 ]
Replace sscanf() with kstrtoul() in set_freq_store() and check the result
to avoid invalid input.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://lore.kernel.org/lkml/20250421030020.3108405-2-zhenglifeng1@huawei.com/
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc64e0421598aaa87d61184f6777b52614a095be ]
Users may disable HWP in firmware, in which case intel_pstate
wouldn't load unless the CPU model is explicitly supported.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20250623105601.3924-1-lirongqing@baidu.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ae204405095abfbc2d694ee0fbb49bcbbe55c57 ]
Detect the result of starting old governor in cpufreq_set_policy(). If it
fails, exit the governor and clear policy->governor.
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20250709104145.2348017-5-zhenglifeng1@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ff0f0d7c6587e38c308be9905e36f86e98fb9c1f ]
regmap_update_bits() can fail so check its return value in
wcd_gpio_direction_output() for consistency with the rest of the code
and propagate any errors.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-2-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fcddcb7e8f38a40db99f87a962c5d0a153a76566 ]
Select PM_GENERIC_DOMAINS instead of depending on it to ensure
it is always enabled when TI_SCI_PM_DOMAINS is selected.
Since PM_GENERIC_DOMAINS is an implicit symbol, it can only be enabled
through 'select' and cannot be explicitly enabled in configuration.
This simplifies the dependency chain and prevents build issues
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20250715-depspmdomain-v2-1-6f0eda3ce824@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31611223fb34a3e9320cdfc4f4395072a13ea78e ]
This driver calls enable_irq_wake() during probe() unconditionally, and
never issues the required corresponding disable_irq_wake() to disable
hardware interrupt wakeup signals.
Additionally, whether or not a device should wake-up the system is
meant to be a policy decision based on sysfs (.../power/wakeup) in the
first place.
Update the driver to use the standard approach to enable/disable IRQ
wake during the suspend/resume callbacks. This solves both issues
described above.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250707-max77759-irq-wake-v1-1-d367f633e4bc@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 300386d117a98961fc1d612d1f1a61997d731b8a ]
cros_ec_ucsi fails to allocate a UCSI instance in it's probe function
because it does not define all operations checked by ucsi_create.
Update cros_ec_ucsi operations to use the same function for read_cci
and poll_cci.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20250711202033.2201305-1-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 27cb8f702eb789f97f7a8bd5a91d76c65a937b2f ]
Add the interrupt enable register offset (inten_offset) so that GPIO
interrupts can be enabled normally on more models.
According to the latest interface specifications, the definition of GPIO
interrupts in ACPI is similar to that in FDT. The GPIO interrupts are
listed one by one according to the GPIO number, and the corresponding
interrupt number can be obtained directly through the GPIO number
specified by the consumer.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250714064542.2276247-1-zhoubinbin@loongson.cn
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bea3e7bfa2957d986683543cbf57092715f9a91b ]
The binder allocator selftest was only checking the last page of buffers
that ended on a page boundary. Correct the page indexing to account for
buffers that are not page-aligned.
Signed-off-by: Tiffany Yang <ynaffit@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250714185321.2417234-2-ynaffit@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 496deecb020d14ba89ba7084fbc3024f91687023 ]
For the i.MX8X and i.MX8 family SoCs, when the Cortex-M core is powered
up and started by the Cortex-A core using the bootloader (e.g., via the
U-Boot bootaux command), both M-core and Linux run within the same SCFW
(System Controller Firmware) partition. With that, Linux has permission
to control the M-core.
But once the M-core is started by the bootloader, the SCFW automatically
enables its clock and sets the clock rate. If Linux later attempts to
enable the same clock via clk_prepare_enable(), the SCFW returns a
'LOCKED' error, as the clock is already configured by the SCFW. This
causes the probe function in imx_rproc.c to fail, leading to the M-core
power domain being shut down while the core is still running. This
results in a fault from the SCU (System Controller Unit) and triggers a
system reset.
To address this issue, ignore handling the clk for i.MX8X and i.MX8
M-core, as SCFW already takes care of enabling and configuring the
clock.
Suggested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20250629172512.14857-3-hiagofranco@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
recovered
[ Upstream commit 79a5ae3c4c5eb7e38e0ebe4d6bf602d296080060 ]
If a synchronous error is detected as a result of user-space process
triggering a 2-bit uncorrected error, the CPU will take a synchronous
error exception such as Synchronous External Abort (SEA) on Arm64. The
kernel will queue a memory_failure() work which poisons the related
page, unmaps the page, and then sends a SIGBUS to the process, so that
a system wide panic can be avoided.
However, no memory_failure() work will be queued when abnormal
synchronous errors occur. These errors can include situations like
invalid PA, unexpected severity, no memory failure config support,
invalid GUID section, etc. In such a case, the user-space process will
trigger SEA again. This loop can potentially exceed the platform
firmware threshold or even trigger a kernel hard lockup, leading to a
system reboot.
Fix it by performing a force kill if no memory_failure() work is queued
for synchronous errors.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://patch.msgid.link/20250714114212.31660-2-xueshuai@linux.alibaba.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 84684c57c9cd47b86c883a7170dd68222d97ef13 ]
Register offsets for v3 and v4 versions are backward compatible. Assign v3
offsets for v4 and all higher versions to avoid end up using v2 offsets.
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250623-rsc_v4-v1-1-275b27bc5e3c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4b9c60e440525b729ac5f071e00bcee12e0a7e84 ]
When a USB4 dock is unplugged from a system it won't respond to ring
events. The PCI core handles the surprise removal event and notifies
all PCI drivers. The XHCI PCI driver sets a flag that the device is
being removed as well.
When that flag is set don't show messages in the cleanup path for
marking the controller dead.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250717073107.488599-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f72b9aa821a2bfe4b6dfec4be19f264d0673b008 ]
There is a subtle contradiction between sections of the xHCI 1.2 spec
regarding the initialization of Input Endpoint Context fields. Section
4.8.2 ("Endpoint Context Initialization") states that all fields should
be initialized to 0. However, Section 6.2.3 ("Endpoint Context", p.453)
specifies that the Average TRB Length (avg_trb_len) field shall be
greater than 0, and explicitly notes (p.454): "Software shall set
Average TRB Length to '8' for control endpoints."
Strictly setting all fields to 0 during initialization conflicts with
the specific recommendation for control endpoints. In practice, setting
avg_trb_len = 0 is not meaningful for the hardware/firmware, as the
value is used for bandwidth calculation.
Motivation: Our company is developing a custom Virtual xHC hardware
platform that strictly follows the xHCI spec and its recommendations.
During validation, we observed that enumeration fails and a parameter
error (TRB Completion Code = 5) is reported if avg_trb_len for EP0 is
not set to 8 as recommended by Section 6.2.3. This demonstrates the
importance of assigning a meaningful, non-zero value to avg_trb_len,
even in virtualized or emulated environments.
This patch explicitly sets avg_trb_len to 8 for EP0 in
xhci_setup_addressable_virt_dev(), as recommended in Section 6.2.3, to
prevent potential issues with xHCI host controllers that enforce the
spec strictly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220033
Signed-off-by: Jay Chen <shawn2000100@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250717073107.488599-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65fc0fc137b5da3ee1f4ca4f61050fcb203d7582 ]
When a USB4 dock is unplugged from a system it won't respond to ring
events. The PCI core handles the surprise removal event and notifies
all PCI drivers. The XHCI PCI driver sets a flag that the device is
being removed, and when the device stops responding a flag is also
added to indicate it's dying.
When that flag is set don't bother to show warnings about a missing
controller.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250717073107.488599-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0494cf9793b7c250f63fdb2cb6b648473e9d4ae6 ]
The QDU100 device does not support the MHI M3 state, necessitating the
disabling of runtime PM for this device. It is essential to disable
runtime PM if the device does not support M3 state.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
[mani: Fixed the kdoc comment for no_m3]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Link: https://patch.msgid.link/20250425-vdev_next-20250411_pm_disable-v4-1-d4870a73ebf9@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 00559ba3ae740e7544b48fb509b2b97f56615892 ]
Add SDX72 based modem Telit FN990B40, reusing FN920C04 configuration.
01:00.0 Unassigned class [ff00]: Qualcomm Device 0309
Subsystem: Device 1c5d:201a
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
[mani: added sdx72 in the comment to identify the chipset]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250716091836.999364-1-dnlplm@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit af833e7f7db3cf4c82f063668e1b52297a30ec18 ]
ucsi_psy_get_current_max would return 0mA as the maximum current if
UCSI detected a BC or a Default USB Power sporce.
The comment in this function is true that we can't tell the difference
between DCP/CDP or SDP chargers, but we can guarantee that at least 1-unit
of USB 1.1/2.0 power is available, which is 100mA, which is a better
fallback value than 0, which causes some userspaces, including the ChromeOS
power manager, to regard this as a power source that is not providing
any power.
In reality, 100mA is guaranteed from all sources in these classes.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250717200805.3710473-1-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a1416a49e63c320f6e6c1c8d07e1b58c0d4a3f3 ]
AMU counters on certain CPPC-based platforms tend to yield inaccurate
delivered performance measurements on systems that are idle/mostly idle.
This results in an inaccurate frequency being stored by cpufreq in its
policy structure when the CPU is brought online. [1]
Consequently, if the userspace governor tries to set the frequency to a
new value, there is a possibility that it would be the erroneous value
stored earlier. In such a scenario, cpufreq would assume that the
requested frequency has already been set and return early, resulting in
the correct/new frequency request never making it to the hardware.
Since the operating frequency is liable to this sort of inconsistency,
mark the CPPC driver with CPUFREQ_NEED_UPDATE_LIMITS so that it is always
invoked when a target frequency update is requested.
Link: https://lore.kernel.org/linux-pm/20250619000925.415528-3-pmalani@google.com/ [1]
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Prashant Malani <pmalani@google.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250722055611.130574-2-pmalani@google.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ff3aeb664f7dfe824ba91ffb0b203397a8d431e ]
The Lenovo Yoga 6 13ACL6 82ND has a similar BIOS problem as other Lenovo
laptops from that vintage that causes a rather long resume from suspend.
Add it to the quirk list that manipulates the scratch register to avoid
the issue.
Reported-by: Adam Berglund <adam.f.berglund@hotmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4434
Tested-by: Adam Berglund <adam.f.berglund@hotmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250718172307.1928744-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f50d5e0c1f80d004510bf77cb0e1759103585c00 ]
A new version of a bona fide genuine NI-USB-HS+ adaptor
sends new response codes to the initialization sequence.
Add the checking for these response codes to suppress
console warning messages.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250722164810.2621-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7919407eca2ef562fa6c98c41cfdf6f6cdd69d92 ]
When encounters some errors like these:
xhci_hcd 0000:4a:00.2: xHCI dying or halted, can't queue_command
xhci_hcd 0000:4a:00.2: FIXME: allocate a command ring segment
usb usb5-port6: couldn't allocate usb_device
It's hard to know whether xhc_state is dying or halted. So it's better
to print xhc_state's value which can help locate the resaon of the bug.
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20250725060117.1773770-1-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c58d42de71f9c73e40afacc9d062892d2cc8862 ]
We used to need securityfs_remove() to undo simple_pin_fs() done when
the file had been created and to drop the second extra reference
taken at the same time. Now that neither is needed (or done by
securityfs_remove()), we can simply call simple_unlink() and be done
with that - the broken games with locking had been there only for the
sake of securityfs_remove().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 413e800cadbf67550d76c77c230b2ecd96bce83a ]
Modify ata_scsi_lpm_store() to return an error if a user attempts to set
a link power management policy for a port that does not support LPM,
that is, ports flagged with ATA_FLAG_NO_LPM.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250701125321.69496-6-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f7870e8d345cdabfb94bcbdcba6a07e050f8705e ]
The AHCI specification version 1.3.1 section 8.3.1.4 (Software
Requirements and Precedence) states that:
If CAP.SSC or CAP.PSC is cleared to ‘0’, software should disable
device-initiated power management by issuing the appropriate SET
FEATURES command to the device.
To satisfy this constraint and force ata_dev_configure to disable the
device DIPM feature, modify ahci_update_initial_lpm_policy() to set the
ATA_FLAG_NO_DIPM flag on ports that have a host with either the
ATA_HOST_NO_PART flag set or the ATA_HOST_NO_SSC flag set.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de.>
Link: https://lore.kernel.org/r/20250701125321.69496-7-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65b2c92f69d3df81422d27e5be012e357e733241 ]
Commit fa997b0576c9 ("ata: ahci: Do not enable LPM if no LPM states are
supported by the HBA") introduced an early return in
ahci_update_initial_lpm_policy() to ensure that the target_lpm_policy
of ports belonging to a host that does not support the Partial, Slumber
and DevSleep power states is unchanged and remains set to
ATA_LPM_UNKNOWN and thus prevents the execution of
ata_eh_link_set_lpm().
However, a user or a system daemon (e.g. systemd-udevd) may still
attempt changing the LPM policy through the sysfs
link_power_management_policy of the host.
Improve this to prevent sysfs LPM policy changes by setting the flag
ATA_FLAG_NO_LPM for the port of such host, and initialize the port
target_lpm_policy to ATA_LPM_MAX_POWER to guarantee that no unsupported
low power state is being used on the port and its link.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250701125321.69496-9-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 00c9c9628b49e368d140cfa61d7df9b8922ec2a8 ]
With `two-primaries` enabled, DRBD tries to detect "concurrent" writes
and handle write conflicts, so that even if you write to the same sector
simultaneously on both nodes, they end up with the identical data once
the writes are completed.
In handling "superseeded" writes, we forgot a kref_get,
resulting in a premature drbd_destroy_device and use after free,
and further to kernel crashes with symptoms.
Relevance: No one should use DRBD as a random data generator, and apparently
all users of "two-primaries" handle concurrent writes correctly on layer up.
That is cluster file systems use some distributed lock manager,
and live migration in virtualization environments stops writes on one node
before starting writes on the other node.
Which means that other than for "test cases",
this code path is never taken in real life.
FYI, in DRBD 9, things are handled differently nowadays. We still detect
"write conflicts", but no longer try to be smart about them.
We decided to disconnect hard instead: upper layers must not submit concurrent
writes. If they do, that's their fault.
Signed-off-by: Sarah Newman <srn@prgmr.com>
Signed-off-by: Lars Ellenberg <lars@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20250627095728.800688-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7e49538288e523427beedd26993d446afef1a6fb ]
Syzbot came up with a reproducer where a loop device block size is
changed underneath a mounted filesystem. This causes a mismatch between
the block device block size and the block size stored in the superblock
causing confusion in various places such as fs/buffer.c. The particular
issue triggered by syzbot was a warning in __getblk_slow() due to
requested buffer size not matching block device block size.
Fix the problem by getting exclusive hold of the loop device to change
its block size. This fails if somebody (such as filesystem) has already
an exclusive ownership of the block device and thus prevents modifying
the loop device under some exclusive owner which doesn't expect it.
Reported-by: syzbot+01ef7a8da81a975e1ccd@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: syzbot+01ef7a8da81a975e1ccd@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20250711163202.19623-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a58ac9bfc412a58c3cf26c6a7e54d4308e9d109 ]
Update the nvme_tcp_start_tls() function to use dev_err() instead of
dev_dbg() when a TLS error is detected. This ensures that handshake
failures are visible by default, aiding in debugging.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ef50c4c6a9c36fa3ea6f1681a80c0bf9a797345 ]
Same as done for raid0, set chunk_sectors limit to appropriately set the
atomic write size limit.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250711105258.3135198-5-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5fb9d4341b782a80eefa0dc1664d131ac3c8885d ]
Same as done for raid0, set chunk_sectors limit to appropriately set the
atomic write size limit.
Setting chunk_sectors limit in this way overrides the stacked limit
already calculated based on the bottom device limits. This is ok, as
when any bios are sent to the bottom devices, the block layer will still
respect the bottom device chunk_sectors.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250711105258.3135198-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5b2c214a95942f7997d1916a4c44017becbc3cac ]
NVMe devices from multiple vendors appear to get stuck in a reset state
that we can't get out of with an NVMe level Controller Reset. The kernel
would report these with messages that look like:
Device not ready; aborting reset, CSTS=0x1
These have historically required a power cycle to make them usable
again, but in many cases, a PCIe FLR is sufficient to restart operation
without a power cycle. Try it if the initial controller reset fails
during any nvme reset attempt.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e0546eabcd6c19765a8dbf5b5db3723e7b0ea75 ]
The Linux IMA (Integrity Measurement Architecture) subsystem used for
secure boot, file integrity, or remote attestation cannot be a loadable
module for few reasons listed below:
o Boot-Time Integrity: IMA’s main role is to measure and appraise files
before they are used. This includes measuring critical system files during
early boot (e.g., init, init scripts, login binaries). If IMA were a
module, it would be loaded too late to cover those.
o TPM Dependency: IMA integrates tightly with the TPM to record
measurements into PCRs. The TPM must be initialized early (ideally before
init_ima()), which aligns with IMA being built-in.
o Security Model: IMA is part of a Trusted Computing Base (TCB). Making it
a module would weaken the security model, as a potentially compromised
system could delay or tamper with its initialization.
IMA must be built-in to ensure it starts measuring from the earliest
possible point in boot which inturn implies TPM must be initialised and
ready to use before IMA.
To enable integration of tpm_event_log with the IMA subsystem, the TPM
drivers (tpm_crb and tpm_crb_ffa) also needs to be built-in. However with
FF-A driver also being initialised at device initcall level, it can lead to
an initialization order issue where:
- crb_acpi_driver_init() may run before tpm_crb_ffa_driver()_init and
ffa_init()
- As a result, probing the TPM device via CRB over FFA is deferred
- ima_init() (called as a late initcall) runs before deferred probe
completes, IMA fails to find the TPM and logs the below error:
| ima: No TPM chip found, activating TPM-bypass!
Eventually it fails to generate boot_aggregate with PCR values.
Because of the above stated dependency, the ffa driver needs to initialised
before tpm_crb_ffa module to ensure IMA finds the TPM successfully when
present.
[ jarkko: reformatted some of the paragraphs because they were going past
the 75 character boundary. ]
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 746d9e9f62a6e8ba0eba2b83fc61cfe7fa8797ce ]
To generate the boot_aggregate log in the IMA subsystem using TPM PCR
values, the TPM driver must be built as built-in and must be probed
before the IMA subsystem is initialized.
However, when the TPM device operates over the FF-A protocol using the
CRB interface, probing fails and returns -EPROBE_DEFER if the
tpm_crb_ffa device — an FF-A device that provides the communication
interface to the tpm_crb driver — has not yet been probed.
This issue occurs because both crb_acpi_driver_init() and
tpm_crb_ffa_driver_init() are registered with device_initcall. As a
result, crb_acpi_driver_init() may be invoked before
tpm_crb_ffa_driver_init(), which is responsible for probing the
tpm_crb_ffa device.
When this happens, IMA fails to detect the TPM device and logs the
following message:
| ima: No TPM chip found, activating TPM-bypass!
Consequently, it cannot generate the boot_aggregate log with the PCR
values provided by the TPM.
To resolve this issue, the tpm_crb_ffa_init() function explicitly
attempts to probe the tpm_crb_ffa by register tpm_crb_ffa driver so that
when tpm_crb_ffa device is created before tpm_crb_ffa_init(), probe the
tpm_crb_ffa device in tpm_crb_ffa_init() to finish probe the TPM device
completely.
This ensures that the TPM device using CRB over FF-A can be successfully
probed, even if crb_acpi_driver_init() is called first.
[ jarkko: reformatted some of the paragraphs because they were going past
the 75 character boundary. ]
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4640c394f23b202a89512346cf28f6622a49031 ]
The current implementation of timeout detection works in the following
way:
1. Read completion status. If completed, return the data
2. Sleep for some time (usleep_range)
3. Check for timeout using current jiffies value. Return an error if
timed out
4. Goto 1
usleep_range doesn't guarantee it's always going to wake up strictly in
(min, max) range, so such a situation is possible:
1. Driver reads completion status. No completion yet
2. Process sleeps indefinitely. In the meantime, TPM responds
3. We check for timeout without checking for the completion again.
Result is lost.
Such a situation also happens for the guest VMs: if vCPU goes to sleep
and doesn't get scheduled for some time, the guest TPM driver will
timeout instantly after waking up without checking for the completion
(which may already be in place).
Perform the completion check once again after exiting the busy loop in
order to give the device the last chance to send us some data.
Since now we check for completion in two places, extract this check into
a separate function.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 39f8fcda2088382a4aa70b258d6f7225aa386f11 ]
The data page pool always fills the HW rx ring with pages. On arm64 with
64K pages, this will waste _at least_ 32K of memory per entry in the rx
ring.
Fix by fragmenting the pages if PAGE_SIZE > BNXT_RX_PAGE_SIZE. This
makes the data page pool the same as the header pool.
Tested with iperf3 with a small (64 entries) rx ring to encourage buffer
circulation.
Fixes: cd1fafe7da1f ("eth: bnxt: add support rx side device memory TCP")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250812182907.1540755-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2efe41234dbd0a83fdb7cd38226c2f70039a2cd3 ]
syzbot reported the following ABBA deadlock:
CPU0 CPU1
---- ----
n_vclocks_store()
lock(&ptp->n_vclocks_mux) [1]
(physical clock)
pc_clock_adjtime()
lock(&clk->rwsem) [2]
(physical clock)
...
ptp_clock_freerun()
ptp_vclock_in_use()
lock(&ptp->n_vclocks_mux) [3]
(physical clock)
ptp_clock_unregister()
posix_clock_unregister()
lock(&clk->rwsem) [4]
(virtual clock)
Since ptp virtual clock is registered only under ptp physical clock, both
ptp_clock and posix_clock must be physical clocks for ptp_vclock_in_use()
to lock &ptp->n_vclocks_mux and check ptp->n_vclocks.
However, when unregistering vclocks in n_vclocks_store(), the locking
ptp->n_vclocks_mux is a physical clock lock, but clk->rwsem of
ptp_clock_unregister() called through device_for_each_child_reverse()
is a virtual clock lock.
Therefore, clk->rwsem used in CPU0 and clk->rwsem used in CPU1 are
different locks, but in lockdep, a false positive occurs because the
possibility of deadlock is determined through lock-class.
To solve this, lock subclass annotation must be added to the posix_clock
rwsem of the vclock.
Reported-by: syzbot+7cfb66a237c4a5fb22ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7cfb66a237c4a5fb22ad
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250728062649.469882-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
