| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 53a5d72bdd70e262623b6009cc4754927b428bad ]
Reuse the vif deflink for link_id = 0 in order to avoid confusion with
vif->bss_conf, which also gets a link id of 0.
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-1-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59ea7af6f9ce218b86f9f46520819247c3a5f97b ]
Use proper link_id in mt7996_tx_prepare_skb routine for mlink lookup.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250704-mt7996-mlo-fixes-v1-5-356456c73f43@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3117a11fff5af9e74f4946f07cb3ca083cbbdf4b ]
Reset the bit 12 in PHY's LRE Control register upon initialization.
According to the datasheet, this bit must be written to zero after
every device reset.
Signed-off-by: Kamil Horák - 2N <kamilh@axis.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250708090140.61355-5-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf8bbaefaa6ae0a07971ea57b3208df60e8ad0a4 ]
Since its inception, the GPU scheduler can leak memory if the driver
calls drm_sched_fini() while there are still jobs in flight.
The simplest way to solve this in a backwards compatible manner is by
adding a new callback, drm_sched_backend_ops.cancel_job(), which
instructs the driver to signal the hardware fence associated with the
job. Afterwards, the scheduler can safely use the established free_job()
callback for freeing the job.
Implement the new backend_ops callback cancel_job().
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/dri-devel/20250418113211.69956-1-tvrtko.ursulin@igalia.com/
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-4-phasta@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c2668a0e03501a26cedc82e32fe9f3f692d330db ]
The scheduler unit tests now provide a new callback, cancel_job(). This
callback gets used by drm_sched_fini() for all still pending jobs to
cancel them.
Implement a new unit test to test this.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-6-phasta@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6fdd41b25fb4154bcde7a38ca1c98e072fa1177c ]
The option to set an api_version_min/max also to the RF was added.
In the case that both the MAC and the RF has a range defined, we take
the narrower range of both.
This doesn't work for non-overlapping ranges. In this case, we should
just take the lower range of both.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709200543.1628666-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c2f3ec7707188d8d5269ae2dce97d7be3e9f261 ]
The scan request validation function uses bitwise and instead
of logical and. Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.3fbc1f27871b.I7a8ee91f463c1a2d9d8561c8232e196885d02c43@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1f5f881ac2c5dc185a88c7bfe47d2b3ecbbc501 ]
The scan request validation function uses bitwise and instead
of logical and. Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.ec7d665f56a4.I416816b491fafa5d3efdf0a4be78356eedf2bd95@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 61be9803f322ab46f31ba944c6ef7de195891f64 ]
We use gtk[i].id, but it is not even set in older FW APIs
(iwl_wowlan_status_v6 and iwl_wowlan_status_v7).
Set it also in older FWs.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.e91e49590414.I27d2fdbed1c54aee59929fa11ec169f07e159406@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3e870815ccf5bc75274158f0b5e234fce6f93229 ]
The IRQ name format string used in devm_kasprintf() mistakenly included
a newline character "\n".
This could lead to confusing log output or misformatted names in sysfs
or debug messages.
This fix removes the newline to ensure proper IRQ naming.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://lore.kernel.org/r/20250624194350.109790-3-alok.a.tiwari@oracle.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f25a7eaa897f21396e99f90809af82ca553c9d14 ]
The Renesas RZ/G3E SMARC EVK uses KSZ9131RNXC phy. On deep power state,
PHY loses the power and on wakeup the rgmii delays are not reconfigured
causing it to fail.
Replace the callback kszphy_resume()->ksz9131_resume() for reconfiguring
the rgmii_delay when it exits from PM suspend state.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250711054029.48536-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 53d20606c40678d425cc03f0978c614dca51f25e ]
The buffer bgx_sel used in snprintf() was too small to safely hold
the formatted string "BGX%d" for all valid bgx_id values. This caused
a -Wformat-truncation warning with `Werror` enabled during build.
Increase the buffer size from 5 to 7 and use `sizeof(bgx_sel)` in
snprintf() to ensure safety and suppress the warning.
Build warning:
CC drivers/net/ethernet/cavium/thunder/thunder_bgx.o
drivers/net/ethernet/cavium/thunder/thunder_bgx.c: In function
‘bgx_acpi_match_id’:
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:27: error: ‘%d’
directive output may be truncated writing between 1 and 3 bytes into a
region of size 2 [-Werror=format-truncation=]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:23: note:
directive argument in the range [0, 255]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~~~~~~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:2: note:
‘snprintf’ output between 5 and 7 bytes into a destination of size 5
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
compiler warning due to insufficient snprintf buffer size.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250711140532.2463602-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7cae4d04717b002cffe41169da3f239c845a0723 ]
Fix below default (W=0) warning:
drivers/net/can/ti_hecc.c: In function 'ti_hecc_start':
drivers/net/can/ti_hecc.c:386:20: warning: conversion from 'long unsigned int' to 'u32' {aka 'unsigned int'} changes value from '18446744073709551599' to '4294967279' [-Woverflow]
386 | mbx_mask = ~BIT(HECC_RX_LAST_MBOX);
| ^
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250715-can-compile-test-v2-1-f7fd566db86f@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f354556e29f40ef44fa8b13dc914817db3537e20 ]
[why]
dc has some code out of sync:
dc_commit_updates_for_stream handles v1/v2/v3,
but dc_update_planes_and_stream makes v1 asic to use v2.
as a reression fix: limit clear_update_flags to dcn32 or newer asic.
need to follow up that v1 asic using v2 issue.
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d524d40e3a6152a3ea1125af729f8cd8ca65efde ]
Writing a string without delimiters (' ', '\n', '\0') to the under
gpu_od/fan_ctrl sysfs or pp_power_profile_mode for the CUSTOM profile
will result in a null pointer dereference.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4401
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2b0ba7b5b010455c4e43ab557860f8b1089e7424 ]
readl() returns 32-bit value but Clause 22/45 registers are 16-bit wide.
Masking with 0xFFFF avoids using garbage upper bits.
Signed-off-by: Jack Ping CHNG <jchng@maxlinear.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250716030349.3796806-1-jchng@maxlinear.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2a601b2d35623065d31ebaf697b07502d54878c9 ]
qdisc_sleeping variable is declared as "struct Qdisc __rcu" and
as such needs proper annotation while accessing it.
Without rtnl_dereference(), the following error is generated by sparse:
drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: warning:
incorrect type in initializer (different address spaces)
drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: expected
struct Qdisc *qdisc
drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: got struct
Qdisc [noderef] __rcu *qdisc_sleeping
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1752675472-201445-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 96a1e15e60216b52da0e6da5336b6d7f5b0188b0 ]
The DMA map functions can fail and should be tested for errors.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250716095733.37452-3-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d61f6cb6f6ef3c70d2ccc0d9c85c508cb8017da9 ]
The DMA map functions can fail and should be tested for errors.
If the mapping fails, unmap and return an error.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250716094733.28734-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 671be46afd1f03de9dc6e4679c88e1a7a81cdff6 ]
This read_poll_timeout_atomic() with a delay of 1 µs and a timeout of
1000000 µs can take ~250 seconds in the worst case because sending a
USB control message takes ~250 µs.
Lower the timeout to 4000 for USB in order to reduce the maximum polling
time to ~1 second.
This problem was observed with RTL8851BU while suspending to RAM with
WOWLAN enabled. The computer sat for 4 minutes with a black screen
before suspending.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/09313da6-c865-4e91-b758-4cb38a878796@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37c23874d13eb369d8b384a1ce5992ff6c23d56f ]
In scheduled scan mode, the current probe request only includes the SSID
IE, but omits the Basic Rate IE. Some APs do not respond to such
incomplete probe requests, causing net-detect failures. To improve
interoperability and ensure APs respond correctly, add the Basic Rate IE
to the probe request in driver.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250716122926.6709-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e1e3fec3e34b4934a9d2c98e4ee00a4d87b19179 ]
The IRQ coalescing config currently reside only inside struct
idpf_q_vector. However, all idpf_q_vector structs are de-allocated and
re-allocated during resets. This leads to user-set coalesce configuration
to be lost.
Add new fields to struct idpf_vport_user_config_data to save the user
settings and re-apply them after reset.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4701ee5044fb3992f1c910630a9673c2dc600ce5 ]
The TCP header fields seq and ack_seq are 32-bit values in network
byte order as (__be32). these fields were earlier printed using
ntohs(), which converts only 16-bit values and produces incorrect
results for 32-bit fields. This patch is changeing the conversion
to ntohl(), ensuring correct interpretation of these sequence numbers.
Notably, the format specifier is updated from %d to %u to reflect the
unsigned nature of these fields.
improves the accuracy of debug log messages for TCP sequence and
acknowledgment numbers during TX timeouts.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717193552.3648791-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 925f0707a67cae0a974c4bd5b718f0263dc56824 ]
sclp_sync_wait() should use the monotonic clock for the delay loop.
Otherwise the code won't work correctly when the clock is changed.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a2bf707270f897ab8077baee8ed5842a5321686 ]
Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(),
the tid value is already incremented, even though the corresponding
TID is not actually allocated. Proceed to
ath12k_dp_rx_peer_tid_delete() starting from unallocated tid,
which might leads to freeing unallocated TID and cause potential
crash or out-of-bounds access.
Hence, fix by correctly decrementing tid before cleanup to match only
the successfully allocated TIDs.
Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(),
as decrementing the tid before cleanup in loop will take care of this.
Compile tested only.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250721061749.886732-1-quic_sarishar@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 61c3e8940f2d8b5bfeaeec4bedc2f3e7d873abb3 ]
If the decice does not support filtering, filtering
must not be used and all packets delivered for the
upper layers to sort.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250717120649.2090929-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 422850b29e05e67c9145895bfe559940caa0caa8 ]
If no frames are received on a queue for a while, the reorder buffer
head_sn may be an old one. When the next frame that is received on
that queue and buffered is a subframe of an AMSDU but not the last
subframe, it will not update the buffer's head_sn. When the frame
release notification arrives, it will not release the buffered frame
because it will look like the notification's NSSN is lower than the
buffer's head_sn (because of a wraparound).
Fix it by updating the head_sn when the first frame is buffered.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.795ec0cb8817.I9ec9a3508e7935e8d1833ea3e086066fdefee644@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 666357bf3e57c6a68be128825775aee14f9a24f7 ]
If no frames are received on a queue for a while, the reorder buffer
head_sn may be an old one. When the next frame that is received on
that queue and buffered is a subframe of an AMSDU but not the last
subframe, it will not update the buffer's head_sn. When the frame
release notification arrives, it will not release the buffered frame
because it will look like the notification's NSSN is lower than the
buffer's head_sn (because of a wraparound).
Fix it by updating the head_sn when the first frame is buffered.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.e1f62a9a603c.I7b57a481122074b1f40d39cd31db2e5262668eb2@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 170db5f873850a04a8eafd3401b2ea36adb20cea ]
In missed beacon handling, we compare the FW link id to the
bss_param_ch_cnt_link_id, which is a spec link id. Fix it.
Reviewed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250723094230.2104f8cac836.I25ed77c2b87bde82a9153e2aa26e09b8a42f6ee3@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 114a2de6fa86d99ed9546cc9113a3cad58beef79 ]
We found at Vates that there are lot of spurious interrupts when
benchmarking the xen-net PV driver frontend. This issue appeared with a
patch that addresses security issue XSA-391 (b27d47950e48 "xen/netfront:
harden netfront against event channel storms"). On an iperf benchmark,
spurious interrupts can represent up to 50% of the interrupts.
Spurious interrupts are interrupts that are rised for nothing, there is
no work to do. This appends because the function that handles the
interrupts ("xennet_tx_buf_gc") is also called at the end of the request
path to garbage collect the responses received during the transmission
load.
The request path is doing the work that the interrupt handler should
have done otherwise. This is particurary true when there is more than
one vcpu and get worse linearly with the number of vcpu/queue.
Moreover, this problem is amplifyed by the penalty imposed by a spurious
interrupt. When an interrupt is found spurious the interrupt chip will
delay the EOI to slowdown the backend. This delay will allow more
responses to be handled by the request path and then there will be more
chance the next interrupt will not find any work to do, creating a new
spurious interrupt.
This causes performance issue. The solution here is to remove the calls
from the request path and let the interrupt handler do the processing of
the responses. This approch removes most of the spurious interrupts
(<0.05%) and also has the benefit of freeing up cycles in the request
path, allowing it to process more work, which improves performance
compared to masking the spurious interrupt one way or another.
This optimization changes a part of the code that is present since the
net frontend driver was upstreamed. There is no similar pattern in the
other xen PV drivers. Since the first commit of xen-netfront is a blob
that doesn't explain all the design choices I can only guess why this
specific mecanism was here. This could have been introduce to compensate
a slow backend at the time (maybe the backend was fixed or optimize
later) or a small queue. In 18 years, both frontend and backend gain lot
of features and optimizations that could have obsolete the feature of
reaping completions from the TX path.
Some vif throughput performance figures from a 8 vCPUs, 4GB of RAM HVM
guest(s):
Without this patch on the :
vm -> dom0: 4.5Gb/s
vm -> vm: 7.0Gb/s
Without XSA-391 patch (revert of b27d47950e48):
vm -> dom0: 8.3Gb/s
vm -> vm: 8.7Gb/s
With XSA-391 and this patch:
vm -> dom0: 11.5Gb/s
vm -> vm: 12.6Gb/s
v2:
- add revewed and tested by tags
- resend with the maintainers in the recipients list
v3:
- remove Fixes tag but keep the commit ref in the explanation
- add a paragraph on why this code was here
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@vates.tech>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Elliott Mitchell <ehem+xen@m5p.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250721093316.23560-1-anthoine.bourgeois@vates.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65b0dca6f9f2c912a77a6ad6cf56f60a895a496b ]
Teach the btusb driver to recognize another variant of the RTL8851BE
bluetooth radio.
/sys/kernel/debug/usb/devices reports for that device:
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3601 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
Reported-by: shdeb <shdeb3000000@gmail.com>
Link: https://bugs.debian.org/1106386
Signed-off-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 942873c8137fe0015ab37f62f159d88079859c5e ]
Add VID 0489 & PID e14e for MediaTek MT7925 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e14e Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7e54d932873d91a55d1b89b7389876d78aeeab32 ]
The SYNC_IN pulse width must be at least 1.5 x Tmclk, corresponding to
~2.5 µs at the lowest supported MCLK frequency. Add a 3 µs delay to
ensure reliable synchronization timing even for the worst-case scenario.
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/d3ee92a533cd1207cf5c5cc4d7bdbb5c6c267f68.1749063024.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8866f4e557eba43e991f99711515217a95f62d2e ]
If cros_typec_probe is called before EC device is registered,
cros_typec_probe will fail. It may happen when cros-ec-typec.ko is
loaded before EC bus layer module (e.g. cros_ec_lpcs.ko,
cros_ec_spi.ko).
Return -EPROBE_DEFER when cros_typec_probe doesn't get EC device, so
the probe function can be called again after EC device is registered.
Signed-off-by: Tomasz Michalec <tmichalec@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Link: https://lore.kernel.org/r/20250610153748.1858519-1-tmichalec@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6418a8504187dc7f5b6f9d0649c03e362cb0664b ]
When KCOV is enabled all functions get instrumented, unless the
__no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions[1], we have
to handle differences in how GCC's inline optimizations get resolved.
For thinkpad_acpi routines, this means forcing two functions to be
inline with __always_inline.
Link: https://lore.kernel.org/lkml/20250523043935.2009972-11-kees@kernel.org/ [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250529181831.work.439-kees@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 47e339cac89143709e84a3b71ba8bd9b2fdd2368 ]
Rather than relying/assuming that the tools generating the firmware
places the program headers immediately following the ELF header, use
e_phoff as intended to find the program headers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250610-mdt-loader-validation-and-fixes-v2-3-f7073e9ab899@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c01fba0b4869cada5403fffff416cd1675dba078 ]
Apparently, ISI needs cache settings similar to LCDIF.
Otherwise we get artefacts in the image.
Tested on i.MX8MP.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Link: https://lore.kernel.org/r/m3ldr69lsw.fsf@t19.piap.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 70627bf82e36e61c40c3315e1206e4ea4c02e668 ]
Adds a shutdown callback to ensure that the XHCI stack is properly
shutdown in reboot/shutdown path.
In kexec flow, kernel_restart_prepare() performs actions necessary
to prepare the system for a restart and invokes device_shutdown. To
ensure proper shutdown attach the dwc3 shutdown implementation which
mirrors the remove method.
$ kexec -e
<snip>
xhci-hcd xhci-hcd.0.auto: remove, state 1
usb usb1: USB disconnect, device number 1
usb 1-1: USB disconnect, device number 6
xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
kexec_core: Starting new kernel
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1748977771-714153-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 503bbde34cc3dd2acd231f277ba70c3f9ed22e59 ]
Checking for the endpoint type is no reason for a WARN, as that can
cause a reboot. A driver not checking the endpoint type must not cause a
reboot, as there is just no point in this. We cannot prevent a device
from doing something incorrect as a reaction to a transfer. Hence
warning for a mere assumption being wrong is not sensible.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250612122149.2559724-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit df9a825f330e76c72d1985bc9bdc4b8981e3d15f ]
If pmc_usb_probe is called before SCU IPC is registered, pmc_usb_probe
will fail.
Return -EPROBE_DEFER when pmc_usb_probe doesn't get SCU IPC device, so
the probe function can be called again after SCU IPC is initialized.
Signed-off-by: Tomasz Michalec <tmichalec@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250610154058.1859812-1-tmichalec@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33a2515abd45c64911955ff1da179589db54f99f ]
The serial info sometimes produces negative TX/RX counts. E.g.:
3: uart:FSL_LPUART mmio:0x02970000 irq:46 tx:-1595870545 rx:339619
RTS|CTS|DTR|DSR|CD
It appears that the print format specifiers don't match with the types of
the respective variables. E.g.: All of the fields in struct uart_icount
are u32, but the format specifier used is %d, even though u32 is unsigned
and %d is for signed integers. Update drivers/tty/serial/serial_core.c
to use the proper format specifiers. Reference
https://docs.kernel.org/core-api/printk-formats.html as the documentation
for what format specifiers are the proper ones to use for a given C type.
Signed-off-by: Joseph Tilahun <jtilahun@astranis.com>
Link: https://lore.kernel.org/r/20250610065653.3750067-1-jtilahun@astranis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2250db8628a0d8293ad2e0671138b848a185fba1 ]
Devices of the Realtek MIPS Otto platform use the official rtl-otto-timer
as clock event generator and CPU clocksource. It is registered for each CPU
startup via cpuhp_setup_state() and forces the affinity of the clockevent
interrupts to the appropriate CPU via irq_force_affinity().
On the "smaller" devices with a vendor specific interrupt controller
(supported by irq-realtek-rtl) the registration works fine. The "larger"
RTL931x series is based on a MIPS interAptiv dual core with a MIPS GIC
controller. Interrupt routing setup is cancelled because gic_set_affinity()
does not accept the current (not yet online) CPU as a target.
Relax the checks by evaluating the force parameter that is provided for
exactly this purpose like in other drivers. With this the affinity can be
set as follows:
- force = false: allow to set affinity to any online cpu
- force = true: allow to set affinity to any cpu
Co-developed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250621054952.380374-1-markus.stockhausen@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 493f9c930e5ff72b3508755b45488d1ae2c9650e ]
Device ID '0xa740' is shared by i7-14700, i7-14700K, and i7-14700T.
Device ID '0xa704' is shared by i5-14600, i5-14600K, and i5-14600T.
Tested locally on my i7-14700K.
Signed-off-by: George Gaidarov <gdgaidarov+lkml@gmail.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250529162933.1228735-1-gdgaidarov+lkml@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 981d7f91aeda17424b29f033249f4fa7cd2a7556 ]
When the EC/ISH starts, it can take a while for all the sensors to be up
and running or declared broken.
If the sensor stack return -EBUSY when checking for sensor information,
retry up to 50 times.
It has been observed 100ms wait time is enough to have valid sensors
ready. It can take more time in case a sensor is really broken and is
not coming up.
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Link: https://lore.kernel.org/r/20250623210518.306740-1-gwendal@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 031d9e30d569ca15ca32f64357c83eee6488e09d ]
The pinctrl sleep state may config the pin mux to certain function to save
power in system suspend. Unfortunately this doesn't work if usdhc is used
as a wakeup source, like waking up on SDIO irqs or card-detect irqs. In
these cases, we need pin mux to be configured to usdhc function pad.
The issue is found on imx93-11x11-evk board, where WiFI over SDIO with
in-band irqs fails to wakeup the system, because the DATA[1] pin has been
set to GPIO function.
To fix the problem, don't change the pinctrl state in suspend if there is a
system wakeup enabled.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Link: https://lore.kernel.org/r/20250521033134.112671-1-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 47a255f7d2eabee06cfbf5b1c2379749442fd01d ]
In the error path of sd_set_power_mode() we don't update host->power_mode,
which could lead to an imbalance of the runtime PM usage count. Fix this by
always updating host->power_mode.
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20250610111633.504366-2-ulf.hansson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 35e8a426b16adbecae7a4e0e3c00fc8d0273db53 ]
mei_cl_bus_dev_release() also frees the mei-client (struct mei_cl)
belonging to the device being released.
If there are bugs like the just fixed bug in the ACE/CSI2 mei drivers,
the mei-client being freed might still be part of the mei_device's
file_list and iterating over this list after the freeing will then trigger
a use-afer-free bug.
Add a check to mei_cl_bus_dev_release() to make sure that the to-be-freed
mei-client is not on the mei_device's file_list.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250623085052.12347-11-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ef1fe4bc38673db72e39b700b29c50dfcc5a415 ]
misc_init() returns -EIO for __register_chrdev() invocation failure, but:
- -EIO is for I/O error normally, but __register_chrdev() does not do I/O.
- -EIO can not cover various error codes returned by __register_chrdev().
Fix by returning error code of __register_chrdev().
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250620-fix_mischar-v1-3-6c2716bbf1fa@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d99f92f71b6b4b2eee776562c991428490f71ef ]
The BRCMSTB and BRCMSTB_RESCAL reset drivers are also
used in the BCM2712, AKA the RPi5. The RPi platforms
have typically used the ARCH_BCM2835, and the PCIe
support for this SoC can use this config which depends
on these drivers so enable building them when just that
arch option is enabled to ensure the platform works as
expected.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250630175301.846082-1-pbrobinson@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6bca1e955830808dc90e0506b2951b4256b81bbb ]
The interrupt handler in pps_gpio_probe() is registered after calling
pps_register_source() using devm_request_irq(). However, in the
corresponding remove function, pps_unregister_source() is called before
the IRQ is freed, since devm-managed resources are released after the
remove function completes.
This creates a potential race condition where an interrupt may occur
after the PPS source is unregistered but before the handler is removed,
possibly leading to a kernel panic.
To prevent this, switch from devm-managed IRQ registration to manual
management by using request_irq() and calling free_irq() explicitly in
the remove path before unregistering the PPS source. This ensures the
interrupt handler is safely removed before deactivating the PPS source.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Link: https://lore.kernel.org/r/20250527053355.37185-1-farbere@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
