| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Due to Race Condition
commit e3f88665a78045fe35c7669d2926b8d97b892c11 upstream.
In the ssi_protocol_probe() function, &ssi->work is bound with
ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function
within the ssip_pn_ops structure is capable of starting the
work.
If we remove the module which will call ssi_protocol_remove()
to make a cleanup, it will free ssi through kfree(ssi),
while the work mentioned above will be used. The sequence
of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ssip_xmit_work
ssi_protocol_remove |
kfree(ssi); |
| struct hsi_client *cl = ssi->cl;
| // use ssi
Fix it by ensuring that the work is canceled before proceeding
with the cleanup in ssi_protocol_remove().
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240918120749.1730-1-kxwang23@m.fudan.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5df5dafc171b90d0b8d51547a82657cd5a1986c7 upstream.
Do not set 'HCI_UART_PROTO_READY' before call 'hci_uart_register_dev()'.
Possible race is when someone calls 'hci_tty_uart_close()' after this bit
is set, but 'hci_uart_register_dev()' wasn't done. This leads to access
to uninitialized fields. To fix it let's set this bit after device was
registered (as before patch c411c62cc133) and to fix previous problem let's
add one more bit in addition to 'HCI_UART_PROTO_READY' which allows to
perform power up without original bit set (pls see commit c411c62cc133).
Crash backtrace from syzbot report:
RIP: 0010:skb_queue_empty_lockless include/linux/skbuff.h:1887 [inline]
RIP: 0010:skb_queue_purge_reason+0x6d/0x140 net/core/skbuff.c:3936
Call Trace:
<TASK>
skb_queue_purge include/linux/skbuff.h:3364 [inline]
mrvl_close+0x2f/0x90 drivers/bluetooth/hci_mrvl.c:100
hci_uart_tty_close+0xb6/0x120 drivers/bluetooth/hci_ldisc.c:557
tty_ldisc_close drivers/tty/tty_ldisc.c:455 [inline]
tty_ldisc_kill+0x66/0xc0 drivers/tty/tty_ldisc.c:613
tty_ldisc_release+0xc9/0x120 drivers/tty/tty_ldisc.c:781
tty_release_struct+0x10/0x80 drivers/tty/tty_io.c:1690
tty_release+0x4ef/0x640 drivers/tty/tty_io.c:1861
__fput+0x86/0x2a0 fs/file_table.c:450
task_work_run+0x82/0xb0 kernel/task_work.c:239
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xa3/0x1b0 kernel/entry/common.c:218
do_syscall_64+0x9a/0x190 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Tested-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/d159c57f-8490-4c26-79da-6ad3612c4a14@salutedevices.com/
Fixes: 366ceff495f9 ("Bluetooth: hci_uart: fix race during initialization")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd4f730b557ce701a2cd4f604bf1e57667bd8b6e upstream.
When an attribute group is created with sysfs_create_group(), the
->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show()
and ->store() callbacks to kobj_attr_show() and kobj_attr_store()
respectively. These functions use container_of() to get the respective
callback from the passed attribute, meaning that these callbacks need to
be of the same type as the callbacks in 'struct kobj_attribute'.
However, ->show() and ->store() in the platform_profile driver are
defined for struct device_attribute with the help of DEVICE_ATTR_RO()
and DEVICE_ATTR_RW(), which results in a CFI violation when accessing
platform_profile or platform_profile_choices under /sys/firmware/acpi
because the types do not match:
CFI failure at kobj_attr_show+0x19/0x30 (target: platform_profile_choices_show+0x0/0x140; expected type: 0x7a69590c)
There is no functional issue from the type mismatch because the layout
of 'struct kobj_attribute' and 'struct device_attribute' are the same,
so the container_of() cast does not break anything aside from CFI.
Change the type of platform_profile_choices_show() and
platform_profile_{show,store}() to match the callbacks in
'struct kobj_attribute' and update the attribute variables to
match, which resolves the CFI violation.
Cc: All applicable <stable@vger.kernel.org>
Fixes: a2ff95e018f1 ("ACPI: platform: Add platform profile support")
Reported-by: John Rowley <lkml@johnrowley.me>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2047
Tested-by: John Rowley <lkml@johnrowley.me>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20250210-acpi-platform_profile-fix-cfi-violation-v3-1-ed9e9901c33a@kernel.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[nathan: Fix conflicts in older stable branches]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55c85fa7579dc2e3f5399ef5bad67a44257c1a48 upstream.
The current implementation of iommufd_device_do_replace() implicitly
assumes that the input device has already been attached. However, there
is no explicit check to verify this assumption. If another device within
the same group has been attached, the replace operation might succeed,
but the input device itself may not have been attached yet.
As a result, the input device might not be tracked in the
igroup->device_list, and its reserved IOVA might not be added. Despite
this, the caller might incorrectly assume that the device has been
successfully replaced, which could lead to unexpected behavior or errors.
To address this issue, add a check to ensure that the input device has
been attached before proceeding with the replace operation. This check
will help maintain the integrity of the device tracking system and prevent
potential issues arising from incorrect assumptions about the device's
attachment status.
Fixes: e88d4ec154a8 ("iommufd: Add iommufd_device_replace()")
Link: https://patch.msgid.link/r/20250306034842.5950-1-yi.l.liu@intel.com
Cc: stable@vger.kernel.org
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb21b1568adaa76af7a8c853f37c60fba8b28661 upstream.
"attach_handle" was added exclusively for the iommufd_fault_iopf_handler()
used by IOPF/PRI use cases. Now, both the MSI and PASID series require to
reuse the attach_handle for non-fault cases.
Add a set of new attach/detach/replace helpers that does the attach_handle
allocation/releasing/replacement in the common path and also handles those
fault specific routines such as iopf enabling/disabling and auto response.
This covers both non-fault and fault cases in a clean way, replacing those
inline helpers in the header. The following patch will clean up those old
helpers in the fault.c file.
Link: https://patch.msgid.link/r/32687df01c02291d89986a9fca897bbbe2b10987.1738645017.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c612cbcdf603aefb3358b2e3964dcd5aa3f827a0 upstream.
The Stage 3 thermal threshold is currently configured during
the controller initialization to 105 Celsius. From the kernel
perspective, this configuration is harmful because:
* The stage 3 interrupt that gets triggered when the threshold is
crossed is not handled in any way by the IRQ handler, it just gets
cleared. Besides, the temperature used for stage 3 comes from the
sensors, and the critical thermal trip points described in the
Devicetree will already cause a shutdown when crossed (at a lower
temperature, of 100 Celsius, for all SoCs currently using this
driver).
* The only effect of crossing the stage 3 threshold that has been
observed is that it causes the machine to no longer be able to enter
suspend. Even if that was a result of a momentary glitch in the
temperature reading of a sensor (as has been observed on the
MT8192-based Chromebooks).
For those reasons, disable the Stage 3 thermal threshold configuration.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-2-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65594b3745024857f812145a58db3601d733676c upstream.
When configured in filtered mode, the LVTS thermal controller will
monitor the temperature from the sensors and trigger an interrupt once a
thermal threshold is crossed.
Currently this is true even during suspend and resume. The problem with
that is that when enabling the internal clock of the LVTS controller in
lvts_ctrl_set_enable() during resume, the temperature reading can glitch
and appear much higher than the real one, resulting in a spurious
interrupt getting generated.
Disable the temperature monitoring and give some time for the signals to
stabilize during suspend in order to prevent such spurious interrupts.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: 8137bb90600d ("thermal/drivers/mediatek/lvts_thermal: Add suspend and resume")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-1-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5d07ab2a7fa1305e429d9221716582f290b58078 upstream.
Commit 40369bfe717e ("spi: fsl-qspi: use devm function instead of driver
remove") introduced managed cleanup via fsl_qspi_cleanup(), but
incorrectly retain manual cleanup in two scenarios:
- On devm_add_action_or_reset() failure, the function automatically call
fsl_qspi_cleanup(). However, the current code still jumps to
err_destroy_mutex, repeating cleanup.
- After the fsl_qspi_cleanup() action is added successfully, there is no
need to manually perform the cleanup in the subsequent error path.
However, the current code still jumps to err_destroy_mutex on spi
controller failure, repeating cleanup.
Skip redundant manual cleanup calls to fix these issues.
Cc: stable@vger.kernel.org
Fixes: 40369bfe717e ("spi: fsl-qspi: use devm function instead of driver remove")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20250410-spi-v1-1-56e867cc19cf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40369bfe717e96e26650eeecfa5a6363563df6e4 upstream.
Driver use devm APIs to manage clk/irq/resources and register the spi
controller, but the legacy remove function will be called first during
device detach and trigger kernel panic. Drop the remove function and use
devm_add_action_or_reset() for driver cleanup to ensure the release
sequence.
Trigger kernel panic on i.MX8MQ by
echo 30bb0000.spi >/sys/bus/platform/drivers/fsl-quadspi/unbind
Cc: stable@vger.kernel.org
Fixes: 8fcb830a00f0 ("spi: spi-fsl-qspi: use devm_spi_register_controller")
Reported-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Han Xu <han.xu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250326224152.2147099-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ccd42b959aaf490333dbd3b9b102eaf295c036a upstream.
If we finds a vq without a name in our input array in
virtio_ccw_find_vqs(), we treat it as "non-existing" and set the vq pointer
to NULL; we will not call virtio_ccw_setup_vq() to allocate/setup a vq.
Consequently, we create only a queue if it actually exists (name != NULL)
and assign an incremental queue index to each such existing queue.
However, in virtio_ccw_register_adapter_ind()->get_airq_indicator() we
will not ignore these "non-existing queues", but instead assign an airq
indicator to them.
Besides never releasing them in virtio_ccw_drop_indicators() (because
there is no virtqueue), the bigger issue seems to be that there will be a
disagreement between the device and the Linux guest about the airq
indicator to be used for notifying a queue, because the indicator bit
for adapter I/O interrupt is derived from the queue index.
The virtio spec states under "Setting Up Two-Stage Queue Indicators":
... indicator contains the guest address of an area wherein the
indicators for the devices are contained, starting at bit_nr, one
bit per virtqueue of the device.
And further in "Notification via Adapter I/O Interrupts":
For notifying the driver of virtqueue buffers, the device sets the
bit in the guest-provided indicator area at the corresponding
offset.
For example, QEMU uses in virtio_ccw_notify() the queue index (passed as
"vector") to select the relevant indicator bit. If a queue does not exist,
it does not have a corresponding indicator bit assigned, because it
effectively doesn't have a queue index.
Using a virtio-balloon-ccw device under QEMU with free-page-hinting
disabled ("free-page-hint=off") but free-page-reporting enabled
("free-page-reporting=on") will result in free page reporting
not working as expected: in the virtio_balloon driver, we'll be stuck
forever in virtballoon_free_page_report()->wait_event(), because the
waitqueue will not be woken up as the notification from the device is
lost: it would use the wrong indicator bit.
Free page reporting stops working and we get splats (when configured to
detect hung wqs) like:
INFO: task kworker/1:3:463 blocked for more than 61 seconds.
Not tainted 6.14.0 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:3 [...]
Workqueue: events page_reporting_process
Call Trace:
[<000002f404e6dfb2>] __schedule+0x402/0x1640
[<000002f404e6f22e>] schedule+0x3e/0xe0
[<000002f3846a88fa>] virtballoon_free_page_report+0xaa/0x110 [virtio_balloon]
[<000002f40435c8a4>] page_reporting_process+0x2e4/0x740
[<000002f403fd3ee2>] process_one_work+0x1c2/0x400
[<000002f403fd4b96>] worker_thread+0x296/0x420
[<000002f403fe10b4>] kthread+0x124/0x290
[<000002f403f4e0dc>] __ret_from_fork+0x3c/0x60
[<000002f404e77272>] ret_from_fork+0xa/0x38
There was recently a discussion [1] whether the "holes" should be
treated differently again, effectively assigning also non-existing
queues a queue index: that should also fix the issue, but requires other
workarounds to not break existing setups.
Let's fix it without affecting existing setups for now by properly ignoring
the non-existing queues, so the indicator bits will match the queue
indexes.
[1] https://lore.kernel.org/all/cover.1720611677.git.mst@redhat.com/
Fixes: a229989d975e ("virtio: don't allocate vqs when names[i] = NULL")
Reported-by: Chandra Merla <cmerla@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20250402203621.940090-1-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 701d0e910955627734917c3587258aa7e73068bb upstream.
On gs101 SoC the fltcon0 (filter configuration 0) offset isn't at a
fixed offset like previous SoCs as the fltcon1 register only exists when
there are more than 4 pins in the bank.
Add a eint_fltcon_offset and new GS101_PIN_BANK_EINT* macros that take
an additional fltcon_offs variable.
This can then be used in suspend/resume callbacks to save and restore
the fltcon0 and fltcon1 registers.
Fixes: 4a8be01a1a7a ("pinctrl: samsung: Add gs101 SoC pinctrl configuration")
Cc: stable@vger.kernel.org
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250307-pinctrl-fltcon-suspend-v4-1-2d775e486036@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e225128c3f8be879e7d4eb71a25949e188b420ae upstream.
When submitting the TLMM test driver, Bjorn reported that some of the test
cases are failing for GPIOs that not are backed by PDC (i.e. "non-wakeup"
GPIOs that are handled directly in pinctrl-msm). Basically, lingering
latched interrupt state is still being delivered at IRQ request time, e.g.:
ok 1 tlmm_test_silent_rising
tlmm_test_silent_falling: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178
Expected atomic_read(&priv->intr_count) == 0, but
atomic_read(&priv->intr_count) == 1 (0x1)
not ok 2 tlmm_test_silent_falling
tlmm_test_silent_low: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178
Expected atomic_read(&priv->intr_count) == 0, but
atomic_read(&priv->intr_count) == 1 (0x1)
not ok 3 tlmm_test_silent_low
ok 4 tlmm_test_silent_high
Whether to report interrupts that came in while the IRQ was unclaimed
doesn't seem to be well-defined in the Linux IRQ API. However, looking
closer at these specific cases, we're actually reporting events that do not
match the interrupt type requested by the driver:
1. After "ok 1 tlmm_test_silent_rising", the GPIO is in low state and
configured for IRQF_TRIGGER_RISING.
2. (a) In preparation for "tlmm_test_silent_falling", the GPIO is switched
to high state. The rising interrupt gets latched.
(b) The GPIO is re-configured for IRQF_TRIGGER_FALLING, but the latched
interrupt isn't cleared.
(c) The IRQ handler is called for the latched interrupt, but there
wasn't any falling edge.
3. (a) For "tlmm_test_silent_low", the GPIO remains in high state.
(b) The GPIO is re-configured for IRQF_TRIGGER_LOW. This seems to
result in a phantom interrupt that gets latched.
(c) The IRQ handler is called for the latched interrupt, but the GPIO
isn't in low state.
4. (a) For "tlmm_test_silent_high", the GPIO is switched to low state.
(b) This doesn't result in a latched interrupt, because RAW_STATUS_EN
was cleared when masking the level-triggered interrupt.
Fix this by clearing the interrupt state whenever making any changes to the
interrupt configuration. This includes previously disabled interrupts, but
also any changes to interrupt polarity or detection type.
With this change, all 16 test cases are now passing for the non-wakeup
GPIOs in the TLMM.
Cc: stable@vger.kernel.org
Fixes: cf9d052aa600 ("pinctrl: qcom: Don't clear pending interrupts when enabling")
Reported-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/20250227-tlmm-test-v1-1-d18877b4a5db@oss.qualcomm.com/
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/20250312-pinctrl-msm-type-latch-v1-1-ce87c561d3d7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aecb63e88c5e5fb9afb782a1577264c76f179af9 upstream.
Ensure the PHY reset and perst is asserted during power-off to
guarantee it is in a reset state upon repeated power-on calls. This
resolves an issue where the PHY may not properly initialize during
subsequent power-on cycles. Power-on will deassert the reset at the
appropriate time after tuning the PHY parameters.
During suspend/resume cycles, we observed that the PHY PLL failed to
lock during resume when the CPU temperature increased from 65C to 75C.
The observed errors were:
phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110
imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110
imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110
This resulted in a complete CPU freeze, which is resolved by ensuring
the PHY is in reset during power-on, thus preventing PHY PLL failures.
Cc: stable@vger.kernel.org
Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f09d3937d400433080d17982bd1a540da53a156d upstream.
The array for the iomapping cookie addresses has a length of
PCI_STD_NUM_BARS. This constant, however, only describes standard BARs;
while PCI can allow for additional, special BARs.
The total number of PCI resources is described by constant
PCI_NUM_RESOURCES, which is also used in, e.g., pci_select_bars().
Thus, the devres array has so far been too small.
Change the length of the devres array to PCI_NUM_RESOURCES.
Link: https://lore.kernel.org/r/20250312080634.13731-3-phasta@kernel.org
Fixes: bbaff68bf4a4 ("PCI: Add managed partial-BAR request and map infrastructure")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 804443c1f27883926de94c849d91f5b7d7d696e9 upstream.
If device_register() fails, call put_device() to give up the reference to
avoid a memory leak, per the comment at device_register().
Found by code review.
Link: https://lore.kernel.org/r/20250225021440.3130264-1-make24@iscas.ac.cn
Fixes: 37d6a0a6f470 ("PCI: Add pci_register_host_bridge() interface")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
[bhelgaas: squash Dan Carpenter's double free fix from
https://lore.kernel.org/r/db806a6c-a91b-4e5a-a84b-6b7e01bdac85@stanley.mountain]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f2768b6a3ee77a295106e3a5d68458064923ede upstream.
If device_register(&child->dev) fails, call put_device() to explicitly
release child->dev, per the comment at device_register().
Found by code review.
Link: https://lore.kernel.org/r/20250202062357.872971-1-make24@iscas.ac.cn
Fixes: 4f535093cf8f ("PCI: Put pci_dev in device tree as early as possible")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e3260237aaadc9799107ccb940c6688195c4518d upstream.
Hot-removal of nested PCI hotplug ports suffers from a long-standing race
condition which can lead to a deadlock: A parent hotplug port acquires
pci_lock_rescan_remove(), then waits for pciehp to unbind from a child
hotplug port. Meanwhile that child hotplug port tries to acquire
pci_lock_rescan_remove() as well in order to remove its own children.
The deadlock only occurs if the parent acquires pci_lock_rescan_remove()
first, not if the child happens to acquire it first.
Several workarounds to avoid the issue have been proposed and discarded
over the years, e.g.:
https://lore.kernel.org/r/4c882e25194ba8282b78fe963fec8faae7cf23eb.1529173804.git.lukas@wunner.de/
A proper fix is being worked on, but needs more time as it is nontrivial
and necessarily intrusive.
Recent commit 9d573d19547b ("PCI: pciehp: Detect device replacement during
system sleep") provokes more frequent occurrence of the deadlock when
removing more than one Thunderbolt device during system sleep. The commit
sought to detect device replacement, but also triggered on device removal.
Differentiating reliably between replacement and removal is impossible
because pci_get_dsn() returns 0 both if the device was removed, as well as
if it was replaced with one lacking a Device Serial Number.
Avoid the more frequent occurrence of the deadlock by checking whether the
hotplug port itself was hot-removed. If so, there's no sense in checking
whether its child device was replaced.
This works because the ->resume_noirq() callback is invoked in top-down
order for the entire hierarchy: A parent hotplug port detecting device
replacement (or removal) marks all children as removed using
pci_dev_set_disconnected() and a child hotplug port can then reliably
detect being removed.
Link: https://lore.kernel.org/r/02f166e24c87d6cde4085865cce9adfdfd969688.1741674172.git.lukas@wunner.de
Fixes: 9d573d19547b ("PCI: pciehp: Detect device replacement during system sleep")
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/r/83d9302a-f743-43e4-9de2-2dd66d91ab5b@panix.com/
Reported-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Closes: https://lore.kernel.org/r/20240926125909.2362244-1-acelan.kao@canonical.com/
Tested-by: Kenneth Crudup <kenny@panix.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d66b5b336245b91681c2042e7eedf63ef7c2f6db upstream.
Commit e49ad667815d ("PCI: j721e: Add TI J784S4 PCIe configuration")
assigned the value of .linkdown_irq_regfield for the J784S4 SoC as the
"LINK_DOWN" macro corresponding to BIT(1), and as a result, the Link
Down interrupts on J784S4 SoC are missed.
According to the Technical Reference Manual and Register Documentation
for the J784S4 SoC[1], BIT(1) corresponds to "ENABLE_SYS_EN_PCIE_DPA_1",
which is not the correct field for the link-state interrupt. Instead, it
is BIT(10) of the "PCIE_INTD_ENABLE_REG_SYS_2" register that corresponds
to the link-state field named as "ENABLE_SYS_EN_PCIE_LINK_STATE".
Thus, set .linkdown_irq_regfield to the macro "J7200_LINK_DOWN", which
expands to BIT(10) and was first defined for the J7200 SoC. Other SoCs
already reuse this macro since it accurately represents the "link-state"
field in their respective "PCIE_INTD_ENABLE_REG_SYS_2" register.
1: https://www.ti.com/lit/zip/spruj52
Fixes: e49ad667815d ("PCI: j721e: Add TI J784S4 PCIe configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log, add a missing .linkdown_irq_regfield member
set to the J7200_LINK_DOWN macro to struct j7200_pcie_ep_data]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250305132018.2260771-1-s-vadapalli@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2df181e1aea4628a8fd257f866026625d0519627 upstream.
A call to of_parse_phandle() is incrementing the refcount, and as such,
the of_node_put() must be called when the reference is no longer needed.
Thus, refactor the existing code and add a missing of_node_put() call
following the check to ensure that "msi_np" matches "pcie->np" and after
MSI initialization, but only if the MSI support is enabled system-wide.
Cc: stable@vger.kernel.org # v5.10+
Fixes: 40ca1bf580ef ("PCI: brcmstb: Add MSI support")
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250122222955.1752778-1-svarbanov@suse.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 708124d9e6e7ac5ebf927830760679136b23fdf0 upstream.
of_irq_init() will leak interrupt controller device node refcounts
in two places as explained below:
1) Leak refcounts of both @desc->dev and @desc->interrupt_parent when
suffers @desc->irq_init_cb() failure.
2) Leak refcount of @desc->interrupt_parent when cleans up list
@intc_desc_list in the end.
Refcounts of both @desc->dev and @desc->interrupt_parent were got in
the first loop, but of_irq_init() does not put them before kfree(@desc)
in places mentioned above, so causes refcount leakages.
Fix by putting refcounts involved before kfree(@desc).
Fixes: 8363ccb917c6 ("of/irq: add missing of_node_put")
Fixes: c71a54b08201 ("of/irq: introduce of_irq_init")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-7-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 962a2805e47b933876ba0e4c488d9e89ced2dd29 upstream.
In irq_of_parse_and_map(), refcount of device node @oirq.np was got
by successful of_irq_parse_one() invocation, but it does not put the
refcount before return, so causes @oirq.np refcount leakage.
Fix by putting @oirq.np refcount before return.
Fixes: e3873444990d ("of/irq: Move irq_of_parse_and_map() to common code")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-6-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bbf71f44aaf241d853759a71de7e7ebcdb89be3d upstream.
of_irq_count() invokes of_irq_parse_one() to count IRQs, and successful
invocation of the later will get device node @irq.np refcount, but the
former does not put the refcount before next iteration invocation, hence
causes device node refcount leakages.
Fix by putting @irq.np refcount before the next iteration invocation.
Fixes: 3da5278727a8 ("of/irq: Rework of_irq_count()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-5-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff93e7213d6cc8d9a7b0bc64f70ed26094e168f3 upstream.
if the node @out_irq->np got by of_irq_parse_raw() is a combo node which
consists of both controller and nexus, namely, of_irq_parse_raw() returns
due to condition (@ipar == @newpar), then the node's refcount was increased
twice, hence causes refcount leakage.
Fix by putting @out_irq->np refcount before returning due to the condition.
Also add comments about refcount of node @out_irq->np got by the API.
Fixes: 041284181226 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-4-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0cb58d6c7b558a69957fabe159bfb184196e1e8d upstream.
of_irq_parse_one(@int_gen_dev, i, ...) will leak refcount of @i_th_phandle
int_gen_dev {
...
interrupts-extended = ..., <&i_th_phandle ...>, ...;
...
};
Refcount of @i_th_phandle is increased by of_parse_phandle_with_args()
but is not decreased by API of_irq_parse_one() before return, so causes
refcount leakage.
Rework the refcounting to use __free() cleanup and simplify the code to
have a single call to of_irq_parse_raw().
Also add comments about refcount of node @out_irq->np got by the API.
Fixes: 79d9701559a9 ("of/irq: create interrupts-extended property")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-2-93e3a2659aa7@quicinc.com
[robh: Use __free() to do puts]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fd5625fc86922f36bedee5846fefd647b7e72751 upstream.
msi_db_mask is of type 'u64', still the standard 'int' arithmetic is
performed to compute its value.
While most of the ntb_hw drivers actually don't utilize the higher 32
bits of the doorbell mask now, this may be the case for Switchtec - see
switchtec_ntb_init_db().
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Fixes: 2b0569b3b7e6 ("NTB: Add MSI interrupt support to ntb_transport")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fa37a8849634db2dd3545116873da8cf4b1e67c6 upstream.
Frag allocators, such as netdev_alloc_frag(), were not designed to
work for fragsz > PAGE_SIZE.
So, switch to page pool for jumbo frames instead of using page frag
allocators. This driver is using page pool for smaller MTUs already.
Cc: stable@vger.kernel.org
Fixes: 80f6215b450e ("net: mana: Add support for jumbo frame")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/1742920357-27263-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 919d14603dab6a9cf03ebbeb2cfa556df48737c8 upstream.
There are two variables that indicate the interrupt type to be used
in the next test execution, global "irq_type" and "test->irq_type".
The former is referenced from pci_endpoint_test_get_irq() to preserve
the current type for ioctl(PCITEST_GET_IRQTYPE).
In the pci_endpoint_test_request_irq(), since this global variable
is referenced when an error occurs, the unintended error message is
displayed.
For example, after running "pcitest -i 2", the following message
shows "MSI 3" even if the current IRQ type becomes "MSI-X":
pci-endpoint-test 0000:01:00.0: Failed to request IRQ 30 for MSI 3
SET IRQ TYPE TO MSI-X: NOT OKAY
Fix this issue by using "test->irq_type" instead of global "irq_type".
Cc: stable@vger.kernel.org
Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-4-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 15970e1b23f5c25db88c613fddf9131de086f28e upstream.
When the tx tail is less than the head (in cases of wraparound), the TX
consumed descriptor statistic in DQ will be reported as
UINT32_MAX - head + tail, which is incorrect. Mask the difference of
head and tail according to the ring size when reporting the statistic.
Cc: stable@vger.kernel.org
Fixes: 2c9198356d56 ("gve: Add consumed counts to ethtool stats")
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402001037.2717315-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c5672e310ad971d408752fce7596ed27adc6008f upstream.
Device can be unbound, so driver must also release memory for the wakeup
source.
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406202245.53854-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8323f3a69de6f6e96bf22f32dd8e2920766050c2 upstream.
When the Tegra186 GPIO controller is probed through ACPI matching,
the driver emits two error messages during probing:
"tegra186-gpio NVDA0508:00: invalid resource (null)"
"tegra186-gpio NVDA0508:00: invalid resource (null)"
Fix this by getting resource first and then do the ioremap.
Fixes: 2606e7c9f5fc ("gpio: tegra186: Add ACPI support")
Cc: stable@vger.kernel.org
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250327032349.78809-1-kanie@linux.alibaba.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2de510fccbca3d1906b55f4be5f1de83fa2424ef upstream.
There's a possible race condition in dm-verity - the prefetch work item
may race with suspend and it is possible that prefetch continues to run
while the device is suspended. Fix this by calling flush_workqueue and
dm_bufio_client_reset in the postsuspend hook.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8bde1033f9cfc1c08628255cc434c6cf39c9d9ba upstream.
When using dm-integrity in standalone mode with a keyed hmac algorithm,
integrity tags are calculated and verified internally.
Using plain memcmp to compare the stored and computed tags may leak the
position of the first byte mismatch through side-channel analysis,
allowing to brute-force expected tags in linear time (e.g., by counting
single-stepping interrupts in confidential virtual machine environments).
Co-developed-by: Luca Wilke <work@luca-wilke.com>
Signed-off-by: Luca Wilke <work@luca-wilke.com>
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 00204ae3d6712ee053353920e3ce2b00c35ef75b upstream.
The dm-integrity target didn't set the error string when memory
allocation failed. This patch fixes it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c565428788fb9b49066f94ab7b10efc686a0a4c upstream.
There's a possible race condition in dm-ebs - dm bufio prefetch may be in
progress while the device is suspended. Fix this by calling
dm_bufio_client_reset in the postsuspend hook.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07bb097b92b987db518e72525b515d77904e966e upstream.
Currently, the ASP primary device check does not have support for PCI
domains, and, as a result, when the system is configured with PCI domains
(PCI segments) the wrong device can be selected as primary. This results
in commands submitted to the device timing out and failing. The device
check also relies on specific device and function assignments that may
not hold in the future.
Fix the primary ASP device check to include support for PCI domains and
to perform proper checking of the Bus/Device/Function positions.
Fixes: 2a6170dfe755 ("crypto: ccp: Add Platform Security Processor (PSP) device support")
Cc: stable@vger.kernel.org
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25708f73ff171bb4171950c9f4be5aa8504b8459 upstream.
Enable the retain_ff_enable bit of GDSCR only if the GDSC is already ON.
Once the GDSCR moves to HW control, SW no longer can determine the state
of the GDSCR and setting the retain_ff bit could destroy all the register
contents we intended to save.
Therefore, move the retain_ff configuration before switching the GDSC to
HW trigger mode.
Cc: stable@vger.kernel.org
Fixes: 173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Tested-by: Imran Shaik <quic_imrashai@quicinc.com> # on QCS8300
Link: https://lore.kernel.org/r/20250214-gdsc_fixes-v1-1-73e56d68a80f@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65a733464553ea192797b889d1533a1a37216f32 upstream.
Adding a new clause to this if/else I noticed the existing usage of
pm_genpd_add_subdomain() wasn't capturing and returning the result code.
pm_genpd_add_subdomain() returns an int and can fail. Capture that result
code and throw it up the call stack if something goes wrong.
Fixes: 1b771839de05 ("clk: qcom: gdsc: enable optional power domain support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-2-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e6dfde439df0bb977cddd3cf7fff150a084a9bf upstream.
gdsc_unregister() should release subdomains in the reverse order to the
order in which those subdomains were added.
I've made this patch a standalone patch because it facilitates a subsequent
fix to stable.
Fixes: 1b771839de05 ("clk: qcom: gdsc: enable optional power domain support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250117-b4-linux-next-24-11-18-clock-multiple-power-domains-v10-1-13f2bb656dad@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5eac348182d2b5ed1066459abedb7bc6b5466f81 upstream.
BRANCH_HALT_ENABLE and BRANCH_HALT_ENABLE_VOTED flags are used to check
halt status of branch clocks, which have an inverted logic for the halt
bit in CBCR register. However, the current logic in the _check_halt()
method only compares the BRANCH_HALT_ENABLE flags, ignoring the votable
branch clocks.
Update the logic to correctly handle the invert logic for votable clocks
using the BRANCH_HALT_ENABLE_VOTED flags.
Fixes: 9092d1083a62 ("clk: qcom: branch: Extend the invert logic for branch2 clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250128-push_fix-v1-1-fafec6747881@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7f22a298d926664b51fcfe2f8ea5feb7f8b79952 upstream.
According to the Rev.1.20 hardware manual for the RZ/Five SoC, the clock
source for HP is derived from PLL6 divided by 2. Correct the
implementation by configuring HP as a fixed clock source instead of a
MUX.
The `CPG_PL6_ETH_SSEL' register, which is available on the RZ/G2UL SoC,
is not present on the RZ/Five SoC, necessitating this change.
Fixes: 95d48d270305ad2c ("clk: renesas: r9a07g043: Add support for RZ/Five SoC")
Cc: stable@vger.kernel.org
Reported-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250127173159.34572-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee022e5cae052e0c67ca7c5fec0f2e7bc897c70e upstream.
The mapping table for the rk3328 is missing the entry for -25C which is
found in the TRM section 9.5.2 "Temperature-to-code mapping".
NOTE: the kernel uses the tsadc_q_sel=1'b1 mode which is defined as:
4096-<code in table>. Whereas the table in the TRM gives the code
"3774" for -25C, the kernel uses 4096-3774=322.
[Dragan Simic] : "After going through the RK3308 and RK3328 TRMs, as
well as through the downstream kernel code, it seems we may have
some troubles at our hands. Let me explain, please.
To sum it up, part 1 of the RK3308 TRM v1.1 says on page 538 that
the equation for the output when tsadc_q_sel equals 1 is (4096 -
tsadc_q), while part 1 of the RK3328 TRM v1.2 says that the output
equation is (1024 - tsadc_q) in that case.
The downstream kernel code, however, treats the RK3308 and RK3328
tables and their values as being the same. It even mentions 1024 as
the "offset" value in a comment block for the rk_tsadcv3_control()
function, just like the upstream code does, which is obviously wrong
"offset" value when correlated with the table on page 544 of part 1
of the RK3308 TRM v1.1.
With all this in mind, it's obvious that more work is needed to make
it clear where's the actual mistake (it could be that the TRM is
wrong), which I'll volunteer for as part of the SoC binning project.
In the meantime, this patch looks fine as-is to me, by offering
what's a clear improvement to the current state of the upstream
code"
Link: https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf
Cc: stable@vger.kernel.org
Fixes: eda519d5f73e ("thermal: rockchip: Support the RK3328 SOC in thermal driver")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250207175048.35959-1-twoerner@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 87af633689ce16ddb166c80f32b120e50b1295de upstream.
PVH dom0 re-uses logic from PV dom0, in which RAM ranges not assigned to
dom0 are re-used as scratch memory to map foreign and grant pages. Such
logic relies on reporting those unpopulated ranges as RAM to Linux, and
mark them as reserved. This way Linux creates the underlying page
structures required for metadata management.
Such approach works fine on PV because the initial balloon target is
calculated using specific Xen data, that doesn't take into account the
memory type changes described above. However on HVM and PVH the initial
balloon target is calculated using get_num_physpages(), and that function
does take into account the unpopulated RAM regions used as scratch space
for remote domain mappings.
This leads to PVH dom0 having an incorrect initial balloon target, which
causes malfunction (excessive memory freeing) of the balloon driver if the
dom0 memory target is later adjusted from the toolstack.
Fix this by using xen_released_pages to account for any pages that are part
of the memory map, but are already unpopulated when the balloon driver is
initialized. This accounts for any regions used for scratch remote
mappings. Note on x86 xen_released_pages definition is moved to
enlighten.c so it's uniformly available for all Xen-enabled builds.
Take the opportunity to unify PV with PVH/HVM guests regarding the usage of
get_num_physpages(), as that avoids having to add different logic for PV vs
PVH in both balloon_add_regions() and arch_xen_unpopulated_init().
Much like a6aa4eb994ee, the code in this changeset should have been part of
38620fc4e893.
Fixes: a6aa4eb994ee ('xen/x86: add extra pages to unpopulated-alloc if available')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407082838.65495-1-roger.pau@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 548183ea388c12b6d76d6982f3d72df3887af0da upstream.
Set the posted MSI irq_chip's irq_ack() hook to irq_move_irq() instead of
a dummy/empty callback so that posted MSIs process pending changes to the
IRQ's SMP affinity. Failure to honor a pending set-affinity results in
userspace being unable to change the effective affinity of the IRQ, as
IRQD_SETAFFINITY_PENDING is never cleared and so irq_set_affinity_locked()
always defers moving the IRQ.
The issue is most easily reproducible by setting /proc/irq/xx/smp_affinity
multiple times in quick succession, as only the first update is likely to
be handled in process context.
Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs")
Cc: Robert Lippert <rlippert@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Wentao Yang <wentaoyang@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250321194249.1217961-1-seanjc@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 93ae6e68b6d6b62d92b3a89d1c253d4a1721a1d3 upstream.
We have recently seen report of lockdep circular lock dependency warnings
on platforms like Skylake and Kabylake:
======================================================
WARNING: possible circular locking dependency detected
6.14.0-rc6-CI_DRM_16276-gca2c04fe76e8+ #1 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
ffffffff8360ee48 (iommu_probe_device_lock){+.+.}-{3:3},
at: iommu_probe_device+0x1d/0x70
but task is already holding lock:
ffff888102c7efa8 (&device->physical_node_lock){+.+.}-{3:3},
at: intel_iommu_init+0xe75/0x11f0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (&device->physical_node_lock){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
intel_iommu_init+0xe75/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #5 (dmar_global_lock){++++}-{3:3}:
down_read+0x43/0x1d0
enable_drhd_fault_handling+0x21/0x110
cpuhp_invoke_callback+0x4c6/0x870
cpuhp_issue_call+0xbf/0x1f0
__cpuhp_setup_state_cpuslocked+0x111/0x320
__cpuhp_setup_state+0xb0/0x220
irq_remap_enable_fault_handling+0x3f/0xa0
apic_intr_mode_init+0x5c/0x110
x86_late_time_init+0x24/0x40
start_kernel+0x895/0xbd0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xbf/0x110
common_startup_64+0x13e/0x141
-> #4 (cpuhp_state_mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
__cpuhp_setup_state_cpuslocked+0x67/0x320
__cpuhp_setup_state+0xb0/0x220
page_alloc_init_cpuhp+0x2d/0x60
mm_core_init+0x18/0x2c0
start_kernel+0x576/0xbd0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xbf/0x110
common_startup_64+0x13e/0x141
-> #3 (cpu_hotplug_lock){++++}-{0:0}:
__cpuhp_state_add_instance+0x4f/0x220
iova_domain_init_rcaches+0x214/0x280
iommu_setup_dma_ops+0x1a4/0x710
iommu_device_register+0x17d/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #2 (&domain->iova_cookie->mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
iommu_setup_dma_ops+0x16b/0x710
iommu_device_register+0x17d/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #1 (&group->mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
__iommu_probe_device+0x24c/0x4e0
probe_iommu_group+0x2b/0x50
bus_for_each_dev+0x7d/0xe0
iommu_device_register+0xe1/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #0 (iommu_probe_device_lock){+.+.}-{3:3}:
__lock_acquire+0x1637/0x2810
lock_acquire+0xc9/0x300
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
iommu_probe_device+0x1d/0x70
intel_iommu_init+0xe90/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
iommu_probe_device_lock --> dmar_global_lock -->
&device->physical_node_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&device->physical_node_lock);
lock(dmar_global_lock);
lock(&device->physical_node_lock);
lock(iommu_probe_device_lock);
*** DEADLOCK ***
This driver uses a global lock to protect the list of enumerated DMA
remapping units. It is necessary due to the driver's support for dynamic
addition and removal of remapping units at runtime.
Two distinct code paths require iteration over this remapping unit list:
- Device registration and probing: the driver iterates the list to
register each remapping unit with the upper layer IOMMU framework
and subsequently probe the devices managed by that unit.
- Global configuration: Upper layer components may also iterate the list
to apply configuration changes.
The lock acquisition order between these two code paths was reversed. This
caused lockdep warnings, indicating a risk of deadlock. Fix this warning
by releasing the global lock before invoking upper layer interfaces for
device registration.
Fixes: b150654f74bf ("iommu/vt-d: Fix suspicious RCU usage")
Closes: https://lore.kernel.org/linux-iommu/SJ1PR11MB612953431F94F18C954C4A9CB9D32@SJ1PR11MB6129.namprd11.prod.outlook.com/
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20250317035714.1041549-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 688124cc541f60d26a7547f45637b23dada4e527 upstream.
Don't overwrite an IRTE that is posting IRQs to a vCPU with a posted MSI
entry if the host IRQ affinity happens to change. If/when the IRTE is
reverted back to "host mode", it will be reconfigured as a posted MSI or
remapped entry as appropriate.
Drop the "mode" field, which doesn't differentiate between posted MSIs and
posted vCPUs, in favor of a dedicated posted_vcpu flag. Note! The two
posted_{msi,vcpu} flags are intentionally not mutually exclusive; an IRTE
can transition between posted MSI and posted vCPU.
Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs")
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250315025135.2365846-3-seanjc@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2454823e97a63d85a6b215905f71e5a06324eab7 upstream.
Add a helper to take care of reconfiguring an IRTE to deliver IRQs to the
host, i.e. not to a vCPU, and use the helper when an IRTE's vCPU affinity
is nullified, i.e. when KVM puts an IRTE back into "host" mode. Because
posted MSIs use an ephemeral IRTE, using modify_irte() puts the IRTE into
full remapped mode, i.e. unintentionally disables posted MSIs on the IRQ.
Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs")
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250315025135.2365846-2-seanjc@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 767e22001dfce64cc03b7def1562338591ab6031 upstream.
Two WARNINGs are observed when SMMU driver rolls back upon failure:
arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8
Call trace:
dmam_free_coherent+0xc0/0xd8 (P)
tegra241_vintf_free_lvcmdq+0x74/0x188
tegra241_cmdqv_remove_vintf+0x60/0x148
tegra241_cmdqv_remove+0x48/0xc8
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
------------[ cut here ]------------
128 pages are still in use!
WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8
Call trace:
free_contig_range+0x18c/0x1c8 (P)
cma_release+0x154/0x2f0
dma_free_contiguous+0x38/0xa0
dma_direct_free+0x10c/0x248
dma_free_attrs+0x100/0x290
dmam_free_coherent+0x78/0xd8
tegra241_vintf_free_lvcmdq+0x74/0x160
tegra241_cmdqv_remove+0x98/0x198
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
This is because the LVCMDQ queue memory are managed by devres, while that
dmam_free_coherent() is called in the context of devm_action_release().
Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres
callbacks if ops->device_remove() is going to be manually freeing things
that probe allocated":
https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/
In fact, tegra241_cmdqv_init_structures() only allocates memory resources
which means any failure that it generates would be similar to -ENOMEM, so
there is no point in having that "falling back to standard SMMU" routine,
as the standard SMMU would likely fail to allocate memory too.
Remove the unwind part in tegra241_cmdqv_init_structures(), and return a
proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via
impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since
devres will take care of that.
Fixes: 483e0bd8883a ("iommu/tegra241-cmdqv: Do not allocate vcmdq until dma_set_mask_and_coherent")
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250407201908.172225-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a05df03a88bc1088be8e9d958f208d6484691e43 upstream.
Reported by smatch:
drivers/iommu/iommufd/device.c:1392 iommufd_access_rw() error: uninitialized symbol 'rc'.
Fixes: 8d40205f6093 ("iommufd: Add kAPI toward external drivers for kernel access")
Link: https://patch.msgid.link/r/20250227200729.85030-1-nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202502271339.a2nWr9UA-lkp@intel.com/
[nicolinc: can't find an original report but only in "old smatch warnings"]
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 276822a00db3c1061382b41e72cafc09d6a0ec30 upstream.
Lockdep detects the following issue on led-backlight removal:
[ 142.315935] ------------[ cut here ]------------
[ 142.315954] WARNING: CPU: 2 PID: 292 at drivers/leds/led-core.c:455 led_sysfs_enable+0x54/0x80
...
[ 142.500725] Call trace:
[ 142.503176] led_sysfs_enable+0x54/0x80 (P)
[ 142.507370] led_bl_remove+0x80/0xa8 [led_bl]
[ 142.511742] platform_remove+0x30/0x58
[ 142.515501] device_remove+0x54/0x90
...
Indeed, led_sysfs_enable() has to be called with the led_access
lock held.
Hold the lock when calling led_sysfs_disable().
Fixes: ae232e45acf9 ("backlight: add led-backlight driver")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20250122091914.309533-1-herve.codina@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b79fe1829975556854665258cf4d2476784a89db upstream.
In r852_ready(), the dev get from r852_get_dev() need to be checked.
An unstable device should not be ready. A proper implementation can
be found in r852_read_byte(). Add a status check and return 0 when it is
unstable.
Fixes: 50a487e7719c ("mtd: rawnand: Pass a nand_chip object to chip->dev_ready()")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
