summaryrefslogtreecommitdiff
path: root/drivers/xen/events/events_base.c
AgeCommit message (Collapse)AuthorFilesLines
2016-06-08xen/events: Don't move disabled irqsRoss Lagerwall1-2/+4
commit f0f393877c71ad227d36705d61d1e4062bc29cf5 upstream. Commit ff1e22e7a638 ("xen/events: Mask a moving irq") open-coded irq_move_irq() but left out checking if the IRQ is disabled. This broke resuming from suspend since it tries to move a (disabled) irq without holding the IRQ's desc->lock. Fix it by adding in a check for disabled IRQs. The resulting stacktrace was: kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31! invalid opcode: 0000 [#1] SMP Modules linked in: xenfs xen_privcmd ... CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016 task: ffff88003d75ee00 ti: ffff88003d7bc000 task.ti: ffff88003d7bc000 RIP: 0010:[<ffffffff810e26e2>] [<ffffffff810e26e2>] irq_move_masked_irq+0xd2/0xe0 RSP: 0018:ffff88003d7bfc50 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88003d40ba00 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000100 RDI: ffff88003d40bad8 RBP: ffff88003d7bfc68 R08: 0000000000000000 R09: ffff88003d000000 R10: 0000000000000000 R11: 000000000000023c R12: ffff88003d40bad0 R13: ffffffff81f3a4a0 R14: 0000000000000010 R15: 00000000ffffffff FS: 0000000000000000(0000) GS:ffff88003da00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd4264de624 CR3: 0000000037922000 CR4: 00000000003406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0 ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009 0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66 Call Trace: [<ffffffff814c8d92>] eoi_pirq+0xb2/0xf0 [<ffffffff814c8f66>] __startup_pirq+0xe6/0x150 [<ffffffff814ca659>] xen_irq_resume+0x319/0x360 [<ffffffff814c7e75>] xen_suspend+0xb5/0x180 [<ffffffff81120155>] multi_cpu_stop+0xb5/0xe0 [<ffffffff811200a0>] ? cpu_stop_queue_work+0x80/0x80 [<ffffffff811203d0>] cpu_stopper_thread+0xb0/0x140 [<ffffffff810a94e6>] ? finish_task_switch+0x76/0x220 [<ffffffff810ca731>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [<ffffffff810a3935>] smpboot_thread_fn+0x105/0x160 [<ffffffff810a3830>] ? sort_range+0x30/0x30 [<ffffffff810a0588>] kthread+0xd8/0xf0 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0 [<ffffffff8182568f>] ret_from_fork+0x3f/0x70 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0 Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20xen/events: Mask a moving irqBoris Ostrovsky1-4/+24
commit ff1e22e7a638a0782f54f81a6c9cb139aca2da35 upstream. Moving an unmasked irq may result in irq handler being invoked on both source and target CPUs. With 2-level this can happen as follows: On source CPU: evtchn_2l_handle_events() -> generic_handle_irq() -> handle_edge_irq() -> eoi_pirq(): irq_move_irq(data); /***** WE ARE HERE *****/ if (VALID_EVTCHN(evtchn)) clear_evtchn(evtchn); If at this moment target processor is handling an unrelated event in evtchn_2l_handle_events()'s loop it may pick up our event since target's cpu_evtchn_mask claims that this event belongs to it *and* the event is unmasked and still pending. At the same time, source CPU will continue executing its own handle_edge_irq(). With FIFO interrupt the scenario is similar: irq_move_irq() may result in a EVTCHNOP_unmask hypercall which, in turn, may make the event pending on the target CPU. We can avoid this situation by moving and clearing the event while keeping event masked. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-26xen/events: Always allocate legacy interrupts on PV guestsBoris Ostrovsky1-2/+3
After commit 8c058b0b9c34 ("x86/irq: Probe for PIC presence before allocating descs for legacy IRQs") early_irq_init() will no longer preallocate descriptors for legacy interrupts if PIC does not exist, which is the case for Xen PV guests. Therefore we may need to allocate those descriptors ourselves. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-23xen/events: fifo: Make it running on 64KB granularityJulien Grall1-1/+1
Only use the first 4KB of the page to store the events channel info. It means that we will waste 60KB every time we allocate page for: * control block: a page is allocating per CPU * event array: a page is allocating everytime we need to expand it I think we can reduce the memory waste for the 2 areas by: * control block: sharing between multiple vCPUs. Although it will require some bookkeeping in order to not free the page when the CPU goes offline and the other CPUs sharing the page still there * event array: always extend the array event by 64K (i.e 16 4K chunk). That would require more care when we fail to expand the event channel. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-11Merge tag 'for-linus-4.3-rc0b-tag' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen terminology fixes from David Vrabel: "Use the correct GFN/BFN terms more consistently" * tag 'for-linus-4.3-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Rename the variable xen_store_mfn to xen_store_gfn xen/privcmd: Further s/MFN/GFN/ clean-up hvc/xen: Further s/MFN/GFN clean-up video/xen-fbfront: Further s/MFN/GFN clean-up xen/tmem: Use xen_page_to_gfn rather than pfn_to_gfn xen: Use correctly the Xen memory terminologies arm/xen: implement correctly pfn_to_mfn xen: Make clear that swiotlb and biomerge are dealing with DMA address
2015-09-08Merge tag 'for-linus-4.3-rc0-tag' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Xen features and fixes for 4.3: - Convert xen-blkfront to the multiqueue API - [arm] Support binding event channels to different VCPUs. - [x86] Support > 512 GiB in a PV guests (off by default as such a guest cannot be migrated with the current toolstack). - [x86] PMU support for PV dom0 (limited support for using perf with Xen and other guests)" * tag 'for-linus-4.3-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (33 commits) xen: switch extra memory accounting to use pfns xen: limit memory to architectural maximum xen: avoid another early crash of memory limited dom0 xen: avoid early crash of memory limited dom0 arm/xen: Remove helpers which are PV specific xen/x86: Don't try to set PCE bit in CR4 xen/PMU: PMU emulation code xen/PMU: Intercept PMU-related MSR and APIC accesses xen/PMU: Describe vendor-specific PMU registers xen/PMU: Initialization code for Xen PMU xen/PMU: Sysfs interface for setting Xen PMU mode xen: xensyms support xen: remove no longer needed p2m.h xen: allow more than 512 GB of RAM for 64 bit pv-domains xen: move p2m list if conflicting with e820 map xen: add explicit memblock_reserve() calls for special pages mm: provide early_memremap_ro to establish read-only mapping xen: check for initrd conflicting with e820 map xen: check pre-allocated page tables for conflict with memory map xen: check for kernel memory conflicting with memory layout ...
2015-09-08xen: Use correctly the Xen memory terminologiesJulien Grall1-1/+1
Based on include/xen/mm.h [1], Linux is mistakenly using MFN when GFN is meant, I suspect this is because the first support for Xen was for PV. This resulted in some misimplementation of helpers on ARM and confused developers about the expected behavior. For instance, with pfn_to_mfn, we expect to get an MFN based on the name. Although, if we look at the implementation on x86, it's returning a GFN. For clarity and avoid new confusion, replace any reference to mfn with gfn in any helpers used by PV drivers. The x86 code will still keep some reference of pfn_to_mfn which may be used by all kind of guests No changes as been made in the hypercall field, even though they may be invalid, in order to keep the same as the defintion in xen repo. Note that page_to_mfn has been renamed to xen_page_to_gfn to avoid a name to close to the KVM function gfn_to_page. Take also the opportunity to simplify simple construction such as pfn_to_mfn(page_to_pfn(page)) into xen_page_to_gfn. More complex clean up will come in follow-up patches. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=e758ed14f390342513405dd766e874934573e6cb Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/events: Support event channel rebind on ARMJulien Grall1-5/+1
Currently, the event channel rebind code is gated with the presence of the vector callback. The virtual interrupt controller on ARM has the concept of per-CPU interrupt (PPI) which allow us to support per-VCPU event channel. Therefore there is no need of vector callback for ARM. Xen is already using a free PPI to notify the guest VCPU of an event. Furthermore, the xen code initialization in Linux (see arch/arm/xen/enlighten.c) is requesting correctly a per-CPU IRQ. Introduce new helper xen_support_evtchn_rebind to allow architecture decide whether rebind an event is support or not. It will always return true on ARM and keep the same behavior on x86. This is also allow us to drop the usage of xen_have_vector_callback entirely in the ARM code. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-11Revert "xen/events/fifo: Handle linked events when closing a port"David Vrabel1-6/+4
This reverts commit fcdf31a7c162de0c93a2bee51df4688ab0a348f8. This was causing a WARNING whenever a PIRQ was closed since shutdown_pirq() is called with irqs disabled. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org>
2015-08-04xen/events/fifo: Handle linked events when closing a portRoss Lagerwall1-4/+6
An event channel bound to a CPU that was offlined may still be linked on that CPU's queue. If this event channel is closed and reused, subsequent events will be lost because the event channel is never unlinked and thus cannot be linked onto the correct queue. When a channel is closed and the event is still linked into a queue, ensure that it is unlinked before completing. If the CPU to which the event channel bound is online, spin until the event is handled by that CPU. If that CPU is offline, it can't handle the event, so clear the event queue during the close, dropping the events. This fixes the missing interrupts (and subsequent disk stalls etc.) when offlining a CPU. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-07-13x86/irq: Use access helper irq_data_get_affinity_mask()Jiang Liu1-2/+2
This is a preparatory patch for moving irq_data struct members. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-17xen: Include xen/page.h rather than asm/xen/page.hJulien Grall1-1/+1
Using xen/page.h will be necessary later for using common xen page helpers. As xen/page.h already include asm/xen/page.h, always use the later. Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: netdev@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-05-19xen/events: don't bind non-percpu VIRQs with percpu chipDavid Vrabel1-4/+8
A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org>
2015-05-05xen/events: Set irq_info->evtchn before binding the channel to CPU in ↵Boris Ostrovsky1-1/+1
__startup_pirq() .. because bind_evtchn_to_cpu(evtchn, cpu) will map evtchn to 'info' and pass 'info' down to xen_evtchn_port_bind_to_cpu(). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Annie Li <annie.li@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-05-05xen/events: Clear cpu_evtchn_mask before resumingBoris Ostrovsky1-2/+3
When a guest is resumed, the hypervisor may change event channel assignments. If this happens and the guest uses 2-level events it is possible for the interrupt to be claimed by wrong VCPU since cpu_evtchn_mask bits may be stale. This can happen even though evtchn_2l_bind_to_cpu() attempts to clear old bits: irq_info that is passed in is not necessarily the original one (from pre-migration times) but instead is freshly allocated during resume and so any information about which CPU the channel was bound to is lost. Thus we should clear the mask during resume. We also need to make sure that bits for xenstore and console channels are set when these two subsystems are resumed. While rebind_evtchn_irq() (which is invoked for both of them on a resume) calls irq_set_affinity(), the latter will in fact postpone setting affinity until handling the interrupt. But because cpu_evtchn_mask will have bits for these two cleared we won't be able to take the interrupt. With that in mind, we need to bind those two channels explicitly in rebind_evtchn_irq(). We will keep irq_set_affinity() so that we have a pass through generic irq affinity code later, in case something needs to be updated there as well. (Also replace cpumask_of(0) with cpumask_of(info->cpu) in rebind_evtchn_irq(): it should be set to zero in preceding xen_irq_info_evtchn_setup().) Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reported-by: Annie Li <annie.li@oracle.com> Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-03-06xen/events: avoid NULL pointer dereference in dom0 on large machinesJuergen Gross1-6/+12
Using the pvops kernel a NULL pointer dereference was detected on a large machine (144 processors) when booting as dom0 in evtchn_fifo_unmask() during assignment of a pirq. The event channel in question was the first to need a new entry in event_array[] in events_fifo.c. Unfortunately xen_irq_info_pirq_setup() is called with evtchn being 0 for a new pirq and the real event channel number is assigned to the pirq only during __startup_pirq(). It is mandatory to call xen_evtchn_port_setup() after assigning the event channel number to the pirq to make sure all memory needed for the event channel is allocated. Signed-off-by: Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-09-23xen/events: support threaded irqs for interdomain event channelsJuergen Gross1-2/+3
Export bind_interdomain_evtchn_to_irq() so drivers can use threaded interrupt handlers with: irq = bind_interdomain_evtchn_to_irq(remote_dom, remote_port); if (irq < 0) /* error */ ret = request_threaded_irq(...); Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-08-01xen/events: drop negativity check of unsigned parameterAndrey Utkin1-1/+1
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80531 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-05-16x86: Get rid of get_nr_irqs_gsi()Thomas Gleixner1-16/+1
No need to expose this outside of the ioapic code. The dynamic allocations are guaranteed not to happen in the gsi space. See commit 62a08ae2a. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20140507154335.959870037@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-04-07Xen: do hv callback accounting only on x86Arnd Bergmann1-1/+1
Patch 99c8b79d3c1 "xen: Add proper irq accounting for HYPERCALL vector" added a call to inc_irq_stat(irq_hv_callback_count) in common Xen code, however both the inc_irq_stat function and the irq_hv_callback_count counter are architecture specific. This makes the code build again on ARM by moving the call into the existing #ifdef CONFIG_X86. We may want to later do the same implementation on ARM that x86 has though. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org>
2014-04-07Merge commit '683b6c6f82a60fabf47012581c2cfbf1b037ab95' into ↵David Vrabel1-20/+5
stable/for-linus-3.15 This merge of the irq-core-for-linus branch broke the ARM build when Xen is enabled. Conflicts: drivers/xen/events/events_base.c
2014-03-18xen: add support for MSI message groupsRoger Pau Monne1-15/+32
Add support for MSI message groups for Xen Dom0 using the MAP_PIRQ_TYPE_MULTI_MSI pirq map type. In order to keep track of which pirq is the first one in the group all pirqs in the MSI group except for the first one have the newly introduced PIRQ_MSI_GROUP flag set. This prevents calling PHYSDEVOP_unmap_pirq on them, since the unmap must be done with the first pirq in the group. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-03-12xen: Validate online cpus in set_affinityThomas Gleixner1-1/+1
The user space interface does not filter out offline cpus. It merily verifies that the mask contains at least one online cpu. So the selector in the irq chip implementation needs to make sure to pick only an online cpu because otherwise: Offline Core 1 Set affinity to 0xe Selector will pick first set bit, i.e. core 1 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Link: http://lkml.kernel.org/r/20140304203100.978031089@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04xen: Add proper irq accounting for HYPERCALL vectorThomas Gleixner1-0/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Link: http://lkml.kernel.org/r/20140223212738.808648133@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04xen: Get rid of the last irq_desc abuseThomas Gleixner1-14/+1
Warn if any PIRQ cannot be bound to an event channel. Remove the check for irq_desc->action. This hypercall never fails in practice so we can emit a warning unconditionally. Remove a check for a valid irq desc. The only caller of xen_destroy_irq() will only do so if the irq was previously fully setup, which means the descriptor has been allocated as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Cc: David Vrabel <david.vrabel@citrix.com> Link: http://lkml.kernel.org/r/20140223212738.579581220@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04xen: Use the proper irq functionsThomas Gleixner1-5/+2
generic_handler_irq() already tests for !desc so use this instead of generic_handle_irq_desc(). Use irq_get_irq_data() instead of desc->irq_data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Link: http://lkml.kernel.org/r/20140223212738.222412125@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-01xen/events: remove unnecessary call to bind_evtchn_to_cpu()David Vrabel1-3/+0
Since bind_evtchn_to_cpu() is always called after an event channel is bound, there is no need to call it after closing an event channel. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-03-01xen/events: remove the unused resend_irq_on_evtchn()David Vrabel1-21/+12
resend_irq_on_evtchn() was only used by ia64 (which no longer has Xen support). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-02-11xen/events: bind all new interdomain events to VCPU0David Vrabel1-0/+2
Commit fc087e10734a4d3e40693fc099461ec1270b3fff (xen/events: remove unnecessary init_evtchn_cpu_bindings()) causes a regression. The kernel-side VCPU binding was not being correctly set for newly allocated or bound interdomain events. In ARM guests where 2-level events were used, this would result in no interdomain events being handled because the kernel-side VCPU masks would all be clear. x86 guests would work because the irq affinity was set during irq setup and this would set the correct kernel-side VCPU binding. Fix this by properly initializing the kernel-side VCPU binding in bind_evtchn_to_irq(). Reported-and-tested-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-06xen/pvh: Piggyback on PVHVM for event channels (v2)Mukesh Rathor1-5/+9
PVH is a PV guest with a twist - there are certain things that work in it like HVM and some like PV. There is a similar mode - PVHVM where we run in HVM mode with PV code enabled - and this patch explores that. The most notable PV interfaces are the XenBus and event channels. We will piggyback on how the event channel mechanism is used in PVHVM - that is we want the normal native IRQ mechanism and we will install a vector (hvm callback) for which we will call the event channel mechanism. This means that from a pvops perspective, we can use native_irq_ops instead of the Xen PV specific. Albeit in the future we could support pirq_eoi_map. But that is a feature request that can be shared with PVHVM. Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-06xen/events: use the FIFO-based ABI if availableDavid Vrabel1-1/+13
Implement all the event channel port ops for the FIFO-based ABI. If the hypervisor supports the FIFO-based ABI, enable it by initializing the control block for the boot VCPU and subsequent VCPUs as they are brought up and on resume. The event array is expanded as required when event ports are setup. The 'xen.fifo_events=0' command line option may be used to disable use of the FIFO-based ABI. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: allow event channel priority to be setDavid Vrabel1-0/+17
Add xen_irq_set_priority() to set an event channels priority. This function will only work with event channel ABIs that support priority (i.e., the FIFO-based ABI). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/evtchn: support more than 4096 portsDavid Vrabel1-0/+13
Remove the check during unbind for NR_EVENT_CHANNELS as this limits support to less than 4096 ports. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add xen_evtchn_mask_all()David Vrabel1-7/+11
Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: Refactor evtchn_to_irq array to be dynamically allocatedDavid Vrabel1-51/+124
Refactor static array evtchn_to_irq array to be dynamically allocated by implementing get and set functions for accesses to the array. Two new port ops are added: max_channels (maximum supported number of event channels) and nr_channels (number of currently usable event channels). For the 2-level ABI, these numbers are both the same as the shared data structure is a fixed size. For the FIFO ABI, these will be different as the event array is expanded dynamically. This allows more than 65000 event channels so an unsigned short is no longer sufficient for an event channel port number and unsigned int is used instead. Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add a evtchn_op for port setupDavid Vrabel1-1/+1
Add a hook for port-specific setup and call it from xen_irq_info_common_setup(). The FIFO-based ABIs may need to perform additional setup (expanding the event array) before a bound event channel can start to receive events. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: allow setup of irq_info to failDavid Vrabel1-65/+91
The FIFO-based event ABI requires additional setup of newly bound events (it may need to expand the event array) and this setup may fail. xen_irq_info_common_init() is a useful place to put this setup so allow this call to fail. This call and the other similar calls are renamed to be *_setup() to reflect that they may now fail. This failure can only occur with new event channels not on rebind. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add struct evtchn_ops for the low-level port operationsDavid Vrabel1-0/+4
evtchn_ops contains the low-level operations that access the shared data structures. This allows alternate ABIs to be supported. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: move 2-level specific code into its own fileDavid Vrabel1-362/+17
In preparation for alternative event channel ABIs, move all the functions accessing the shared data structures into their own file. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: move drivers/xen/events.c into drivers/xen/events/David Vrabel1-0/+1908
events.c will be split into multiple files so move it into its own directory. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-25 01:59:23 +0300