summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)AuthorFilesLines
2015-12-27watchdog: dw_wdt: fix signedness bug in dw_wdt_top_in_seconds()Jisheng Zhang1-1/+1
On 64bit platforms, "(1 << (16 + top)) / clk_get_rate(dw_wdt.clk)" is sign-extended to 64bit then converted to unsigned 64bit, finally divide the clk rate. If the top is the maximum TOP i.e 15, "(1 << (16 +15))" will be sign-extended to 0xffffffff80000000, then converted to unsigned 0xffffffff80000000, which is a huge number, thus the final result is wrong. We fix this issue by giving usigned value(1U in this case) at first. Let's assume clk rate is 25MHZ, Before the patch: dw_wdt_top_in_seconds(15) = -864612050 After the patch: dw_wdt_top_in_seconds(15) = 85 Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: refuse to unload softdog module when its timer is runningLi RongQing1-2/+6
the softdog has static variables which are accessed if its timer is still running after the driver is unloaded. and lead to crash: $modprobe softdog $echo 1 >/dev/watchdog $modprobe -r softdog CPU 20 Unable to handle kernel paging request at virtual address Oops[#1]: CPU: 20 PID: 0 Comm: swapper/20 Not tainted 4.1.13-WR8.0.0.0_standard ... Modules linked in: [last unloaded: softdog] .... Call Trace: [<ffffffff801e142c>] cascade+0x34/0xb0 [<ffffffff801e1964>] run_timer_softirq+0x30c/0x368 [<ffffffff80181044>] __do_softirq+0x1ec/0x418 [<ffffffff801815d0>] irq_exit+0x90/0x98 [<ffffffff8010749c>] plat_irq_dispatch+0xa4/0x140 [<ffffffff80152740>] ret_from_irq+0x0/0x4 [<ffffffff801529e0>] __r4k_wait+0x20/0x40 [<ffffffff801c2278>] cpu_startup_entry+0x2a0/0x368 [<ffffffff8015fa64>] start_secondary+0x444/0x4d8 add the module ref when timer is running to avoid to unload the softdog module Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: stmp3xxx: Stop the watchdog on system haltHarald Geyer1-0/+28
This allows the system to actually halt even if userspace forgot to disable the watchdog first. Old behaviour was that the watchdog forced the system to boot again. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27sp5100_tco: fix the device check for SB800 and later chipsetsHuang Rui1-12/+16
For SB800 and later chipsets, the register definitions are the same with SB800. And for SB700 and older chipsets, the definitions should be same with SP5100/SB7x0. Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Denis Turischev <denis.turischev@compulab.co.il> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27sp5100_tco: Add AMD Carrizo platform supportHuang Rui1-0/+2
sp5100_tco watchdog is also supported on AMD KernCZ chipset of Carrizo platform. Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Denis Turischev <denis.turischev@compulab.co.il> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27sp5100_tco: Add AMD Mullins platform supportDenis Turischev1-0/+2
AMD Mullins watchdog is fully compatible to the previous Hudson chipset, reuse the existent sp5100_tco driver. Signed-off-by: Denis Turischev <denis.turischev@compulab.co.il> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: Read device status through sysfs attributesPratyush Anand3-1/+122
This patch adds following attributes to watchdog device's sysfs interface to read its different status. * state - reads whether device is active or not * identity - reads Watchdog device's identity string. * timeout - reads current timeout. * timeleft - reads timeleft before watchdog generates a reset * bootstatus - reads status of the watchdog device at boot * status - reads watchdog device's internal status bits * nowayout - reads whether nowayout feature was set or not Testing with iTCO_wdt: # cd /sys/class/watchdog/watchdog1/ # ls bootstatus dev device identity nowayout power state subsystem timeleft timeout uevent # cat identity iTCO_wdt # cat timeout 30 # cat state inactive # echo > /dev/watchdog1 # cat timeleft 26 # cat state active # cat bootstatus 0 # cat nowayout 0 Signed-off-by: Pratyush Anand <panand@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: Use static struct class watchdog_class in stead of pointerPratyush Anand3-18/+25
We need few sysfs attributes to know different status of a watchdog device. To do that, we need to associate .dev_groups with watchdog_class. So convert it from pointer to static. Putting this static struct in watchdog_dev.c, so that static device attributes defined in that file can be attached to it. Signed-off-by: Pratyush Anand <panand@redhat.com> Suggested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: w83627hf_wdt: use core reboot notifierDamien Riegel1-30/+2
Get rid of the custom reboot notifier block registration and use the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirlinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: softdog: use core reboot notifierDamien Riegel1-28/+2
Get rid of the custom reboot notifier block registration and use the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirlinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: gpio_wdt: use core reboot notifierDamien Riegel1-33/+2
Get rid of the custom reboot notifier block registration and use the one provided by the watchdog core. Note that this watchdog used to stop unconditionnaly on SYS_HALT and SYS_POWER_OFF. The core function now calls ops->stop on SYS_HALT and SYS_DOWN. To prevent the watchdog from being stopped on reboot, the "always-running" property must be set, otherwise it will now be stopped. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirlinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: cadence_wdt: use core reboot notifierDamien Riegel1-35/+1
Get rid of the custom reboot notifier block registration and use the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirlinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: bcm47xx_wdt: use core reboot notifierDamien Riegel1-22/+2
Get rid of the custom reboot notifier block registration and use the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirlinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: core: add reboot notifier supportDamien Riegel1-0/+37
Many watchdog drivers register a reboot notifier in order to stop the watchdog on system reboot. Thus we can factorize this code in the watchdog core. For that purpose, a new notifier block is added in watchdog_device for internal use only, as well as a new watchdog_stop_on_reboot helper function. If this helper is called, watchdog core registers the related notifier block and will stop the watchdog when SYS_HALT or SYS_DOWN is received. Since this operation can be critical on some platforms, abort the device registration if the reboot notifier registration fails. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: sunxi_wdt: use core restart handlerDamien Riegel1-18/+5
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: s3c2410_wdt: use core restart handlerDamien Riegel1-35/+25
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: qcom-wdt: use core restart handlerDamien Riegel1-30/+19
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: mtk_wdt: use core restart handlerDamien Riegel1-17/+5
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: moxart_wdt: use core restart handlerDamien Riegel1-17/+6
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: meson_wdt: use core restart handlerDamien Riegel1-18/+5
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: lpc18xx_wdt: use core restart handlerDamien Riegel1-31/+21
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: imx2_wdt: use core restart handlerDamien Riegel1-17/+6
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: imgpdc_wdt: use core restart handlerDamien Riegel1-22/+12
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: digicolor_wdt: use core restart handlerDamien Riegel1-13/+5
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: da9063_wdt: use core restart handlerDamien Riegel1-17/+6
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: bcm47xx_wdt: use core restart handlerDamien Riegel1-20/+13
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: core: add restart handler supportDamien Riegel1-0/+48
Many watchdog drivers implement the same code to register a restart handler. This patch provides a generic way to set such a function. The patch adds a new restart watchdog operation. If a restart priority greater than 0 is needed, the driver can call watchdog_set_restart_priority to set it. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-11-23watchdog: mtk_wdt: Use MODE_KEY when stopping the watchdogNicolas Boichat1-0/+1
WDT_MODE value need to be or-ed with MODE_KEY when setting watchdog mode. Add it to mtk_wdt_stop function, so that the watchdog can be stopped (e.g. during suspend). Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-11-23watchdog: Add support for Freescale Layerscape platformsShaohui Xie1-1/+1
Modify watchdog/Kconfig file to support Layerscape platforms. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-11-23watchdog: tegra: Stop watchdog first if restartingAndrew Chew1-1/+3
If we need to restart the watchdog due to someone changing the timeout interval, stop the watchdog before restarting it. Otherwise, the new timeout doesn't seem to take. Signed-off-by: Andrew Chew <achew@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-11-23watchdog: w83977f_wdt: underflow in wdt_set_timeout()Dan Carpenter1-1/+1
"t" is controlled by the user. If "t" is a very large integer then it could lead to a negative "tmrval". We cap the upper bound of "tmrval" but, in the current code, we allow negatives. This is a bug and it causes a static checker warning. Let's make "tmrval" unsigned to avoid this problem. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-11-23watchdog: pnx4008: make global wdt_clk staticVladimir Zapolskiy1-1/+1
Silences sparse warning: drivers/watchdog/pnx4008_wdt.c:83:25: warning: symbol 'wdt_clk' was not declared. Should it be static? Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-11-23watchdog: pnx4008: fix warnings caused by enabling unprepared clockVladimir Zapolskiy1-3/+3
If common clock framework is configured, the driver generates a warning, which is fixed by this change: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.3.0-rc2+ #171 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (pnx4008_wdt_probe+0x78/0x11c) [<>] (pnx4008_wdt_probe) from [<>] (platform_drv_probe+0x50/0xa0) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64) [<>] (__platform_driver_register) from [<>] (platform_wdt_driver_init+0x18/0x20) [<>] (platform_wdt_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-11-23watchdog: omap_wdt: fix null pointer dereferencePeter Robinson1-1/+1
Fix issue from two patches overlapping causing a kernel oops [ 3569.297449] Unable to handle kernel NULL pointer dereference at virtual address 00000088 [ 3569.306272] pgd = dc894000 [ 3569.309287] [00000088] *pgd=00000000 [ 3569.313104] Internal error: Oops: 5 [#1] SMP ARM [ 3569.317986] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_filter ebtable_nat ebtable_broute bridge stp llc ebtables ip6table_security ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_filter ip6_tables iptable_security iptable_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle musb_dsps cppi41 musb_hdrc phy_am335x udc_core phy_generic phy_am335x_control omap_sham omap_aes omap_rng omap_hwspinlock omap_mailbox hwspinlock_core musb_am335x omap_wdt at24 8250_omap leds_gpio cpufreq_dt smsc davinci_mdio mmc_block ti_cpsw cpsw_common ptp pps_core cpsw_ale davinci_cpdma omap_hsmmc omap_dma mmc_core i2c_dev [ 3569.386293] CPU: 0 PID: 1429 Comm: wdctl Not tainted 4.3.0-0.rc7.git0.1.fc24.armv7hl #1 [ 3569.394740] Hardware name: Generic AM33XX (Flattened Device Tree) [ 3569.401179] task: dbd11a00 ti: dbaac000 task.ti: dbaac000 [ 3569.406917] PC is at omap_wdt_get_timeleft+0xc/0x20 [omap_wdt] [ 3569.413106] LR is at watchdog_ioctl+0x3cc/0x42c [ 3569.417902] pc : [<bf0ab138>] lr : [<c0739c54>] psr: 600f0013 [ 3569.417902] sp : dbaadf18 ip : 00000003 fp : 7f5d3bbe [ 3569.430014] r10: 00000000 r9 : 00000003 r8 : bef21ab8 [ 3569.435535] r7 : dbbc0f7c r6 : dbbc0f18 r5 : bef21ab8 r4 : 00000000 [ 3569.442427] r3 : 00000000 r2 : 00000000 r1 : 8004570a r0 : dbbc0f18 [ 3569.449323] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3569.456858] Control: 10c5387d Table: 9c894019 DAC: 00000051 [ 3569.462927] Process wdctl (pid: 1429, stack limit = 0xdbaac220) [ 3569.469179] Stack: (0xdbaadf18 to 0xdbaae000) [ 3569.473790] df00: bef21ab8 dbf60e38 [ 3569.482441] df20: dc91b840 8004570a bef21ab8 c03988a4 dbaadf48 dc854000 00000000 dd313850 [ 3569.491092] df40: ddf033b8 0000570a dc91b80b dbaadf3c dbf60e38 00000020 c0df9250 c0df6c48 [ 3569.499741] df60: dc91b840 8004570a 00000000 dc91b840 dc91b840 8004570a bef21ab8 00000003 [ 3569.508389] df80: 00000000 c03989d4 bef21b74 7f5d3bad 00000003 00000036 c020fcc4 dbaac000 [ 3569.517037] dfa0: 00000000 c020fb00 bef21b74 7f5d3bad 00000003 8004570a bef21ab8 00000001 [ 3569.525685] dfc0: bef21b74 7f5d3bad 00000003 00000036 00000001 00000000 7f5e4eb0 7f5d3bbe [ 3569.534334] dfe0: 7f5e4f10 bef21a3c 7f5d0a54 b6e97e0c a00f0010 00000003 00000000 00000000 [ 3569.543038] [<bf0ab138>] (omap_wdt_get_timeleft [omap_wdt]) from [<c0739c54>] (watchdog_ioctl+0x3cc/0x42c) [ 3569.553266] [<c0739c54>] (watchdog_ioctl) from [<c03988a4>] (do_vfs_ioctl+0x5bc/0x698) [ 3569.561648] [<c03988a4>] (do_vfs_ioctl) from [<c03989d4>] (SyS_ioctl+0x54/0x7c) [ 3569.569400] [<c03989d4>] (SyS_ioctl) from [<c020fb00>] (ret_fast_syscall+0x0/0x3c) [ 3569.577413] Code: e12fff1e e52de004 e8bd4000 e5903060 (e5933088) [ 3569.584089] ---[ end trace cec3039bd3ae610a ]--- Cc: <stable@vger.kernel.org> # v4.2+ Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-11-10Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds7-86/+346
Pull watchdog update from Wim Van Sebroeck: - New driver for Broadcom 7038 Set-Top Box - imx2_wdt: Use register definition in regmap_write() - intel-mid: add Magic Closure flag - watchdog framework improvements: - Use device tree alias for naming watchdogs - propagate ping error code to the user space - Always evaluate new timeout against min_timeout - Use single variable name for struct watchdog_device - include clean-ups * git://www.linux-watchdog.org/linux-watchdog: watchdog: include: add units for timeout values in kerneldoc watchdog: include: fix some typos watchdog: core: propagate ping error code to the user space watchdog: watchdog_dev: Use single variable name for struct watchdog_device watchdog: Always evaluate new timeout against min_timeout watchdog: intel-mid: add Magic Closure flag watchdog: imx2_wdt: Use register definition in regmap_write() watchdog: watchdog_dev: Use device tree alias for naming watchdogs watchdog: Watchdog driver for Broadcom Set-Top Box watchdog: bcm7038: add device tree binding documentation
2015-11-03watchdog: core: propagate ping error code to the user spaceAlexander Usyskin1-4/+8
Watchdog ping return errors are ignored by watchdog core, Whatchdog daemon should be informed about possible hardware error or underlaying device driver get unregistered. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-11-03watchdog: watchdog_dev: Use single variable name for struct watchdog_deviceGuenter Roeck1-76/+75
The current code uses 'wdd', wddev', and 'watchdog' as variable names for struct watchdog_device. This is confusing and makes it difficult to enhance the code. Replace it all with 'wdd'. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Timo Kokkonen <timo.kokkonen@offcode.fi> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-10-29watchdog: intel-mid: add Magic Closure flagDavid Cohen1-1/+1
Adding WDIOF_MAGICCLOSE to Intel MID watchdog driver. Once the watchdog is opened, it makes sense to disable watchdog only if it was gracefully released. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-10-29watchdog: imx2_wdt: Use register definition in regmap_write()Fabio Estevam1-3/+3
In order to improve readability it is better to pass the register name definition rather than to pass its hardcoded offset. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-10-27watchdog: watchdog_dev: Use device tree alias for naming watchdogsJustin Chen1-2/+13
Currently there is no way to easily differentiate multiple watchdog devices. The watchdogs are named by the order they are probed. 1st probed watchdog: /dev/watchdog0 2nd probed watchdog: /dev/watchdog1 ... This change uses the alias of the watchdog device node for the name of the watchdog. aliases { watchdog0 = "/...../...." watchdog3 = "/..../....." watchdog2 = "/..../....." ... } This will translate to... /dev/watchdog0 /dev/watchdog3 /dev/watchdog2 v2 Assign alias number to id in watchdog_core instead of watchdog_dev. If failed to get id, fallback to original ida_simple_get call. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-10-27watchdog: Watchdog driver for Broadcom Set-Top BoxJustin Chen3-0/+246
Watchdog driver for Broadcom 7038 and newer chips. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-10-14s390/diag: add a statistic for diagnose callsMartin Schwidefsky1-0/+4
Introduce /sys/debug/kernel/diag_stat with a statistic how many diagnose calls have been done by each CPU in the system. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-28watchdog: iTCO: Fix dependencies on I2CGuenter Roeck1-1/+2
If I2C is built as module, the iTCO watchdog driver must be built as module as well. I2C_I801 must only be selected if I2C is configured. This fixes the following build errors, seen if I2C=m and ITCO_WDT=y. i2c-i801.c:(.text+0x2bf055): undefined reference to `i2c_del_adapter' i2c-i801.c:(.text+0x2c13e0): undefined reference to `i2c_add_adapter' i2c-i801.c:(.text+0x2c17bd): undefined reference to `i2c_new_device' Fixes: 2a7a0e9bf7b3 ("watchdog: iTCO_wdt: Add support for TCO on Intel Sunrisepoint") Reviewed-by: Matt Fleming <matt.fleming@intel.com> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-28watchdog: bcm2835: Fix poweroff behaviourNoralf Trønnes1-2/+8
Currently poweroff/halt results in a reboot on the Raspberry Pi. The firmware uses the RSTS register to know which partiton to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. Partiton 63 is a special partition used by the firmware to indicate halt. The firmware made this change in 19 Aug 2013 and was matched by the downstream commit: Changes for new NOOBS multi partition booting from gsh Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-28watchdog: Fix module autoload for OF platform driverLuis de Bethencourt3-0/+3
These platform drivers have a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-12Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds49-130/+844
Pull watchdog updates from Wim Van Sebroeck: - new driver for NXP LPC18xx Watchdog Timer - new driver for SAMA5D4 watchdog timer - add support for MCP79 to nv_tco driver - clean-up and improvement of the mpc8xxx watchdog driver - improvements to gpio-wdt - at91sam9_wdt clock improvements ... and other small fixes and improvements * git://www.linux-watchdog.org/linux-watchdog: (25 commits) Watchdog: Fix parent of watchdog_devices watchdog: at91rm9200: Correct check for syscon_node_to_regmap() errors watchdog: at91sam9: get and use slow clock Documentation: dt: binding: atmel-sama5d4-wdt: for SAMA5D4 watchdog driver watchdog: add a driver to support SAMA5D4 watchdog timer watchdog: mpc8xxx: allow to compile for MPC512x watchdog: mpc8xxx: use better error code when watchdog cannot be enabled watchdog: mpc8xxx: use dynamic memory for device specific data watchdog: mpc8xxx: use devm_ioremap_resource to map memory watchdog: mpc8xxx: make use of of_device_get_match_data watchdog: mpc8xxx: simplify registration watchdog: mpc8xxx: remove dead code watchdog: lpc18xx_wdt_get_timeleft() can be static DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation watchdog: NXP LPC18xx Watchdog Timer Driver watchdog: gpio-wdt: ping already at startup for always running devices watchdog: gpio-wdt: be more strict about hw_algo matching Documentation: watchdog: at91sam9_wdt: add clocks property watchdog: booke_wdt: Use infrastructure to check timeout limits watchdog: (nv_tco) add support for MCP79 ...
2015-09-09Watchdog: Fix parent of watchdog_devicesPratyush Anand36-0/+36
/sys/class/watchdog/watchdogn/device/modalias can help to identify the driver/module for a given watchdog node. However, many wdt devices do not set their parent and so, we do not see an entry for device in sysfs for such devices. This patch fixes parent of watchdog_device so that /sys/class/watchdog/watchdogn/device is populated. Exceptions: booke, diag288, octeon, softdog and w83627hf -- They do not have any parent. Not sure, how we can identify driver for these devices. Signed-off-by: Pratyush Anand <panand@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: at91rm9200: Correct check for syscon_node_to_regmap() errorsBjorn Andersson1-1/+1
syscon_node_to_regmap() returns a regmap or an ERR_PTR(). Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: at91sam9: get and use slow clockAlexandre Belloni1-2/+20
Commit dca1a4b5ff6e ("clk: at91: keep slow clk enabled to prevent system hang") added a workaround for the slow clock as it is not properly handled by its users. Get and use the slow clock as it is necessary for the at91sam9 watchdog. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09watchdog: add a driver to support SAMA5D4 watchdog timerWenyou Yang4-0/+292
From SAMA5D4, the watchdog timer is upgrated with a new feature, which is describled as in the datasheet, "WDT_MR can be written until a LOCKMR command is issued in WDT_CR". That is to say, as long as the bootstrap and u-boot don't issue a LOCKMR command, WDT_MR can be written more than once in the driver. So the SAMA5D4 watchdog driver's implementation is different from the at91sam9260 watchdog driver implemented in file at91sam9_wdt.c. The user application open the device file to enable the watchdog timer hardware, and close to disable it, and set the watchdog timer timeout by seting WDV and WDD fields of WDT_MR register, and ping the watchdog by issuing WDRSTT command to WDT_CR register with hard-coded key. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-07 16:19:01 +0300