summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)AuthorFilesLines
2026-03-04watchdog: imx7ulp_wdt: handle the nowayout optionOleksandr Suvorov1-0/+1
[ Upstream commit d303d37ef5cf86c8c3b2daefd2a7d7fd8ca1ec14 ] The module parameter `nowayout` indicates whether the watchdog should ever be allowed to stop, but the driver currently ignores this option. Pass the `nowayout` parameter to the watchdog core by setting the WDOG_NO_WAY_OUT flag accordingly. Signed-off-by: Oleksandr Suvorov <cryosay@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04fix it87_wdt early reboot by reporting running timerRené Rebe1-0/+12
[ Upstream commit 88b2ab346436f799b99894a3e9518a3ffa344524 ] Some products, such as the Ugreen DXP4800 Plus NAS, ship with the it87 wdt enabled by the firmware and a broken BIOS option that does not allow to change the time or turn it off. As this makes installing Linux rather difficult, change the it87_wdt to report it running to the watchdog core. Signed-off-by: René Rebe <rene@exactco.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11via_wdt: fix critical boot hang due to unnamed resource allocationLi Qiang1-0/+1
[ Upstream commit 7aa31ee9ec92915926e74731378c009c9cc04928 ] The VIA watchdog driver uses allocate_resource() to reserve a MMIO region for the watchdog control register. However, the allocated resource was not given a name, which causes the kernel resource tree to contain an entry marked as "<BAD>" under /proc/iomem on x86 platforms. During boot, this unnamed resource can lead to a critical hang because subsequent resource lookups and conflict checks fail to handle the invalid entry properly. Signed-off-by: Li Qiang <liqiang01@kylinos.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-11watchdog: wdat_wdt: Fix ACPI table leak in probe functionHaotian Zhang1-21/+43
[ Upstream commit 25c0b472eab8379683d4eef681185c104bed8ffd ] wdat_wdt_probe() calls acpi_get_table() to obtain the WDAT ACPI table but never calls acpi_put_table() on any paths. This causes a permanent ACPI table memory leak. Add a single cleanup path which calls acpi_put_table() to ensure the ACPI table is always released. Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07watchdog: s3c2410_wdt: Fix max_timeout being calculated largerSangwook Shin1-2/+8
[ Upstream commit df3c6e0b6d83450563d6266e1dacc7eaf25511f4 ] Fix the issue of max_timeout being calculated larger than actual value. The calculation result of freq / (S3C2410_WTCON_PRESCALE_MAX + 1) / S3C2410_WTCON_MAXDIV is smaller than the actual value because the remainder is discarded during the calculation process. This leads to a larger calculated value for max_timeout compared to the actual settable value. To resolve this issue, the order of calculations in the computation process has been adjusted. Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sangwook Shin <sw617.shin@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdogChristophe Leroy1-0/+2
[ Upstream commit 7dfd80f70ef00d871df5af7c391133f7ba61ad9b ] When the watchdog gets enabled with this driver, it leaves enough time for the core watchdog subsystem to start pinging it. But when the watchdog is already started by hardware or by the boot loader, little time remains before it fires and it happens that the core watchdog subsystem doesn't have time to start pinging it. Until commit 19ce9490aa84 ("watchdog: mpc8xxx: use the core worker function") pinging was managed by the driver itself and the watchdog was immediately pinged by setting the timer expiry to 0. So restore similar behaviour by pinging it when enabling it so that if it was already enabled the watchdog timer counter is reloaded. Fixes: 19ce9490aa84 ("watchdog: mpc8xxx: use the core worker function") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28watchdog: iTCO_wdt: Report error if timeout configuration failsZiyan Fu1-1/+5
[ Upstream commit 40efc43eb7ffb5a4e2f998c13b8cfb555e671b92 ] The driver probes with the invalid timeout value when 'iTCO_wdt_set_timeout()' fails, as its return value is not checked. In this case, when executing "wdctl", we may get: Device: /dev/watchdog0 Timeout: 30 seconds Timeleft: 613 seconds The timeout value is the value of "heartbeat" or "WATCHDOG_TIMEOUT", and the timeleft value is calculated from the register value we actually read (0xffff) by masking with 0x3ff and converting ticks to seconds (* 6 / 10). Add error handling to return the failure code if 'iTCO_wdt_set_timeout()' fails, ensuring the driver probe fails and prevents invalid operation. Signed-off-by: Ziyan Fu <fuzy5@lenovo.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250704073518.7838-1-13281011316@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28watchdog: dw_wdt: Fix default timeoutSebastian Reichel1-0/+2
[ Upstream commit ac3dbb91e0167d017f44701dd51c1efe30d0c256 ] The Synopsys Watchdog driver sets the default timeout to 30 seconds, but on some devices this is not a valid timeout. E.g. on RK3588 the actual timeout being used is 44 seconds instead. Once the watchdog is started the value is updated accordingly, but it would be better to expose a sensible timeout to userspace without the need to first start the watchdog. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250717-dw-wdt-fix-initial-timeout-v1-1-86dc864d48dd@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28watchdog: sbsa: Adjust keepalive timeout to avoid MediaTek WS0 race conditionAaron Plattner1-3/+47
[ Upstream commit 48defdf6b083f74a44e1f742db284960d3444aec ] The MediaTek implementation of the sbsa_gwdt watchdog has a race condition where a write to SBSA_GWDT_WRR is ignored if it occurs while the hardware is processing a timeout refresh that asserts WS0. Detect this based on the hardware implementer and adjust wdd->min_hw_heartbeat_ms to avoid the race by forcing the keepalive ping to be one second later. Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Acked-by: Timur Tabi <ttabi@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250721230640.2244915-1-aplattner@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15watchdog: ziirave_wdt: check record length in ziirave_firm_verify()Dan Carpenter1-0/+3
[ Upstream commit 8b61d8ca751bc15875b50e0ff6ac3ba0cf95a529 ] The "rec->len" value comes from the firmware. We generally do trust firmware, but it's always better to double check. If the length value is too large it would lead to memory corruption when we set "data[i] = ret;" Fixes: 217209db0204 ("watchdog: ziirave_wdt: Add support to upload the firmware.") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/3b58b453f0faa8b968c90523f52c11908b56c346.1748463049.git.dan.carpenter@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27watchdog: da9052_wdt: respect TWDMINMarcus Folkesson1-0/+1
[ Upstream commit 325f510fcd9cda5a44bcb662b74ba4e3dabaca10 ] We have to wait at least the minimium time for the watchdog window (TWDMIN) before writings to the wdt register after the watchdog is activated. Otherwise the chip will assert TWD_ERROR and power down to reset mode. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-4-a38a560fef0e@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27watchdog: exar: Shorten identity name to fit correctlyKees Cook1-1/+1
[ Upstream commit 8e28276a569addb8a2324439ae473848ee52b056 ] The static initializer for struct watchdog_info::identity is too long and gets initialized without a trailing NUL byte. Since the length of "identity" is part of UAPI and tied to ioctls, just shorten the name of the device. Avoids the warning seen with GCC 15's -Wunterminated-string-initialization option: drivers/watchdog/exar_wdt.c:224:27: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization] 224 | .identity = "Exar/MaxLinear XR28V38x Watchdog", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 81126222bd3a ("watchdog: Exar/MaxLinear XR28V38x driver") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250415225246.work.458-kees@kernel.org Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-02watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04James Hilliard1-0/+39
[ Upstream commit 43439076383a7611300334d1357c0f8883f40816 ] For the watchdog timer to work properly on the QCML04 board we need to set PWRGD enable in the Environment Controller Configuration Registers Special Configuration Register 1 when it is not already set, this may be the case when the watchdog is not enabled from within the BIOS. Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20241025063441.3494837-1-james.hilliard1@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14watchdog: rti: of: honor timeout-sec propertyAlexander Sverdlin1-1/+2
commit 4962ee045d8f06638714d801ab0fb72f89c16690 upstream. Currently "timeout-sec" Device Tree property is being silently ignored: even though watchdog_init_timeout() is being used, the driver always passes "heartbeat" == DEFAULT_HEARTBEAT == 60 as argument. Fix this by setting struct watchdog_device::timeout to DEFAULT_HEARTBEAT and passing real module parameter value to watchdog_init_timeout() (which may now be 0 if not specified). Cc: stable@vger.kernel.org Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20241107203830.1068456-1-alexander.sverdlin@siemens.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()Yassine Oudjana1-0/+6
[ Upstream commit a1495a21e0b8aad92132dfcf9c6fffc1bde9d5b2 ] Clear the IRQ enable bit of WDT_MODE before asserting software reset in order to make TOPRGU issue a system reset signal instead of an IRQ. Fixes: a44a45536f7b ("watchdog: Add driver for Mediatek watchdog") Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20241106104738.195968-2-y.oudjana@protonmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14watchdog: apple: Actually flush writes after requesting watchdog restartNick Chan1-1/+1
[ Upstream commit 51dfe714c03c066aabc815a2bb2adcc998dfcb30 ] Although there is an existing code comment about flushing the writes, writes were not actually being flushed. Actually flush the writes by changing readl_relaxed() to readl(). Fixes: 4ed224aeaf661 ("watchdog: Add Apple SoC watchdog driver") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nick Chan <towinchenmi@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20241001170018.20139-2-towinchenmi@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14iTCO_wdt: mask NMI_NOW bit for update_no_reboot_bit() callOleksandr Ocheretnyi1-2/+19
[ Upstream commit daa814d784ac034c62ab3fb0ef83daeafef527e2 ] Commit da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake PCH iTCO") does not mask NMI_NOW bit during TCO1_CNT register's value comparison for update_no_reboot_bit() call causing following failure: ... iTCO_vendor_support: vendor-support=0 iTCO_wdt iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS ... and this can lead to unexpected NMIs later during regular crashkernel's workflow because of watchdog probe call failures. This change masks NMI_NOW bit for TCO1_CNT register values to avoid unexpected NMI_NOW bit inversions. Fixes: da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake PCH iTCO") Signed-off-by: Oleksandr Ocheretnyi <oocheret@cisco.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20240913191403.2560805-1-oocheret@cisco.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17watchdog: imx_sc_wdt: Don't disable WDT in suspendJonas Blixt1-24/+0
[ Upstream commit 2d9d6d300fb0a4ae4431bb308027ac9385746d42 ] Parts of the suspend and resume chain is left unprotected if we disable the WDT here. >From experiments we can see that the SCU disables and re-enables the WDT when we enter and leave suspend to ram. By not touching the WDT here we are protected by the WDT all the way to the SCU. Signed-off-by: Jonas Blixt <jonas.blixt@actia.se> CC: Anson Huang <anson.huang@nxp.com> Fixes: 986857acbc9a ("watchdog: imx_sc: Add i.MX system controller watchdog support") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240801121845.1465765-1-jonas.blixt@actia.se Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03watchdog: rzg2l_wdt: Check return status of pm_runtime_put()Claudiu Beznea1-2/+9
[ Upstream commit 471e45a33302852bf79bc140fe418782f50734f6 ] pm_runtime_put() may return an error code. Check its return status. Along with it the rzg2l_wdt_set_timeout() function was updated to propagate the result of rzg2l_wdt_stop() to its caller. Fixes: 2cbc5cd0b55f ("watchdog: Add Watchdog Timer driver for RZ/G2L") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240531065723.1085423-5-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()Claudiu Beznea1-3/+8
[ Upstream commit f0ba0fcdd19943809b1a7f760f77f6673c6aa7f7 ] pm_runtime_get_sync() may return with error. In case it returns with error dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get() takes care of this. Thus use it. Along with it the rzg2l_wdt_set_timeout() function was updated to propagate the result of rzg2l_wdt_start() to its caller. Fixes: 2cbc5cd0b55f ("watchdog: Add Watchdog Timer driver for RZ/G2L") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240531065723.1085423-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety marginJudith Mendez1-19/+15
commit cae58516534e110f4a8558d48aa4435e15519121 upstream. On AM62x, the watchdog is pet before the valid window is open. Fix min_hw_heartbeat and accommodate a 2% + static offset safety margin. The static offset accounts for max hardware error. Remove the hack in the driver which shifts the open window boundary, since it is no longer necessary due to the fix mentioned above. cc: stable@vger.kernel.org Fixes: 5527483f8f7c ("watchdog: rti-wdt: attach to running watchdog during probe") Signed-off-by: Judith Mendez <jm@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240417205700.3947408-1-jm@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-12watchdog: sa1100: Fix PTR_ERR_OR_ZERO() vs NULL check in sa1100dog_probe()Chen Ni1-3/+2
[ Upstream commit 413bf4e857fd79617524d5dcd35f463e9aa2dd41 ] devm_ioremap() doesn't return error pointers, it returns NULL on error. Update the check accordingly. Fixes: e86bd43bcfc5 ("watchdog: sa1100: use platform device registration") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240426075808.1582678-1-nichen@iscas.ac.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12watchdog: bd9576: Drop "always-running" propertyMatti Vaittinen1-11/+1
[ Upstream commit e3b3afd34d84efcbe4543deb966b1990f43584b8 ] The always-running (from linux,wdt-gpio.yaml) is abused by the BD9576 watchdog driver. It's defined meaning is "the watchdog is always running and can not be stopped". The BD9576 watchdog driver has implemented it as "start watchdog when loading the module and prevent it from being stopped". Furthermore, the implementation does not set the WDOG_HW_RUNNING when enabling the watchdog due to the "always-running" at module loading. This will end up resulting a watchdog timeout if the device is not opened. The culprit was pointed out by Guenter, discussion can be found from https://lore.kernel.org/lkml/4fa3a64b-60fb-4e5e-8785-0f14da37eea2@roeck-us.net/ Drop the invalid "always-running" handling. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: b237bcac557a ("wdt: Support wdt on ROHM BD9576MUF and BD9573MUF") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/ZhPAt76yaJMersXf@fedora Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27watchdog: stm32_iwdg: initialize default timeoutBen Wolsieffer1-0/+3
[ Upstream commit dbd7c0088b7f44aa0b9276ed3449df075a7b5b54 ] The driver never sets a default timeout value, therefore it is initialized to zero. When CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is enabled, the watchdog is started during probe. The kernel is supposed to automatically ping the watchdog from this point until userspace takes over, but this does not happen if the configured timeout is zero. A zero timeout causes watchdog_need_worker() to return false, so the heartbeat worker does not run and the system therefore resets soon after the driver is probed. This patch fixes this by setting an arbitrary non-zero default timeout. The default could be read from the hardware instead, but I didn't see any reason to add this complexity. This has been tested on an STM32F746. Fixes: 85fdc63fe256 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe") Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240228182723.12855-1-ben.wolsieffer@hefring.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05watchdog: it87_wdt: Keep WDTCTRL bit 3 unmodified for IT8784/IT8786Werner Fischer1-1/+13
[ Upstream commit d12971849d71781c1e4ffd1117d4878ce233d319 ] WDTCTRL bit 3 sets the mode choice for the clock input of IT8784/IT8786. Some motherboards require this bit to be set to 1 (= PCICLK mode), otherwise the watchdog functionality gets broken. The BIOS of those motherboards sets WDTCTRL bit 3 already to 1. Instead of setting all bits of WDTCTRL to 0 by writing 0x00 to it, keep bit 3 of it unchanged for IT8784/IT8786 chips. In this way, bit 3 keeps the status as set by the BIOS of the motherboard. Watchdog tests have been successful with this patch with the following systems: IT8784: Thomas-Krenn LES plus v2 (YANLING YL-KBRL2 V2) IT8786: Thomas-Krenn LES plus v3 (YANLING YL-CLU L2) IT8786: Thomas-Krenn LES network 6L v2 (YANLING YL-CLU6L) Link: https://lore.kernel.org/all/140b264d-341f-465b-8715-dacfe84b3f71@roeck-us.net/ Signed-off-by: Werner Fischer <devlists@wefi.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231213094525.11849-4-devlists@wefi.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26watchdog: rti_wdt: Drop runtime pm reference count when watchdog is unusedVignesh Raghavendra1-1/+12
[ Upstream commit c1a6edf3b541e44e78f10bc6024df779715723f1 ] Call runtime_pm_put*() if watchdog is not already started during probe and re enable it in watchdog start as required. On K3 SoCs, watchdogs and their corresponding CPUs are under same power-domain, so if the reference count of unused watchdogs aren't dropped, it will lead to CPU hotplug failures as Device Management firmware won't allow to turn off the power-domain due to dangling reference count. Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Manorit Chawdhry <m-chawdhry@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231213140110.938129-1-vigneshr@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26watchdog: bcm2835_wdt: Fix WDIOC_SETTIMEOUT handlingStefan Wahren1-1/+2
[ Upstream commit f33f5b1fd1be5f5106d16f831309648cb0f1c31d ] Users report about the unexpected behavior for setting timeouts above 15 sec on Raspberry Pi. According to watchdog-api.rst the ioctl WDIOC_SETTIMEOUT shouldn't fail because of hardware limitations. But looking at the code shows that max_timeout based on the register value PM_WDOG_TIME_SET, which is the maximum. Since 664a39236e71 ("watchdog: Introduce hardware maximum heartbeat in watchdog core") the watchdog core is able to handle this problem. This fix has been tested with watchdog-test from selftests. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217374 Fixes: 664a39236e71 ("watchdog: Introduce hardware maximum heartbeat in watchdog core") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231112173251.4827-1-wahrenst@gmx.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26watchdog/hpwdt: Only claim UNKNOWN NMI if from iLOJerry Hoemann1-1/+1
[ Upstream commit dced0b3e51dd2af3730efe14dd86b5e3173f0a65 ] Avoid unnecessary crashes by claiming only NMIs that are due to ERROR signalling or generated by the hpwdt hardware device. The code does this, but only for iLO5. The intent was to preserve legacy, Gen9 and earlier, semantics of using hpwdt for error containtment as hardware/firmware would signal fatal IO errors as an NMI with the expectation of hpwdt crashing the system. Howerver, these IO errors should be received by hpwdt as an NMI_IO_CHECK. So the test is overly permissive and should not be limited to only ilo5. We need to enable this protection for future iLOs not matching the current PCI IDs. Fixes: 62290a5c194b ("watchdog: hpwdt: Claim NMIs generated by iLO5") Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231213215340.495734-2-jerry.hoemann@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26watchdog: set cdev owner before addingCurtis Klein1-2/+1
[ Upstream commit 38d75297745f04206db9c29bdd75557f0344c7cc ] When the new watchdog character device is registered, it becomes available for opening. This creates a race where userspace may open the device before the character device's owner is set. This results in an imbalance in module_get calls as the cdev_get in cdev_open will not increment the reference count on the watchdog driver module. This causes problems when the watchdog character device is released as the module loader's reference will also be released. This makes it impossible to open the watchdog device later on as it now appears that the module is being unloaded. The open will fail with -ENXIO from chrdev_open. The legacy watchdog device will fail with -EBUSY from the try_module_get in watchdog_open because it's module owner is the watchdog core module so it can still be opened but it will fail to get a refcount on the underlying watchdog device driver. Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev") Signed-off-by: Curtis Klein <curtis.klein@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20231205190522.55153-1-curtis.klein@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28sbsa_gwdt: Calculate timeout with 64-bit mathDarren Hart1-2/+2
commit 5d6aa89bba5bd6af2580f872b57f438dab883738 upstream. Commit abd3ac7902fb ("watchdog: sbsa: Support architecture version 1") introduced new timer math for watchdog revision 1 with the 48 bit offset register. The gwdt->clk and timeout are u32, but the argument being calculated is u64. Without a cast, the compiler performs u32 operations, truncating intermediate steps, resulting in incorrect values. A watchdog revision 1 implementation with a gwdt->clk of 1GHz and a timeout of 600s writes 3647256576 to the one shot watchdog instead of 300000000000, resulting in the watchdog firing in 3.6s instead of 600s. Force u64 math by casting the first argument (gwdt->clk) as a u64. Make the order of operations explicit with parenthesis. Fixes: abd3ac7902fb ("watchdog: sbsa: Support architecture version 1") Reported-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com> Signed-off-by: Darren Hart <darren@os.amperecomputing.com> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: <stable@vger.kernel.org> # 5.14.x Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/7d1713c5ffab19b0f3de796d82df19e8b1f340de.1695286124.git.darren@os.amperecomputing.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-20watchdog: ixp4xx: Make sure restart always worksLinus Walleij1-3/+25
[ Upstream commit b4075ecfe348a44209534c75ad72392c63a489a6 ] The IXP4xx watchdog in early "A0" silicon is unreliable and cannot be registered, however for some systems such as the USRobotics USR8200 the watchdog is the only restart option, so implement a "dummy" watchdog that can only support restart in this case. Fixes: 1aea522809e6 ("watchdog: ixp4xx: Implement restart") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230926-ixp4xx-wdt-restart-v2-1-15cf4639b423@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-loadRaag Jadav1-0/+1
[ Upstream commit cf38e7691c85f1b09973b22a0b89bf1e1228d2f9 ] When built with CONFIG_INTEL_MID_WATCHDOG=m, currently the driver needs to be loaded manually, for the lack of module alias. This causes unintended resets in cases where watchdog timer is set-up by bootloader and the driver is not explicitly loaded. Add MODULE_ALIAS() to load the driver automatically at boot and avoid this issue. Fixes: 87a1ef8058d9 ("watchdog: add Intel MID watchdog driver support") Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230811120220.31578-1-raag.jadav@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub)Yuechao Zhao1-1/+3
[ Upstream commit 009637de1f65cff452ad49554d1e8ef9fda99e43 ] Add PCI_VENDOR_ID_HYGON(Hygon vendor id [0x1d94]) in this driver Signed-off-by: Yuechao Zhao <yuechao.zhao@advantech.com.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20230612031907.796461-1-a345351830@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-09watchdog: menz069_wdt: fix watchdog initialisationJohannes Thumshirn1-10/+6
[ Upstream commit 87b22656ca6a896d0378e9e60ffccb0c82f48b08 ] Doing a 'cat /dev/watchdog0' with menz069_wdt as watchdog0 will result in a NULL pointer dereference. This happens because we're passing the wrong pointer to watchdog_register_device(). Fix this by getting rid of the static watchdog_device structure and use the one embedded into the driver's per-instance private data. Signed-off-by: Johannes Thumshirn <jth@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230418172531.177349-2-jth@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-30watchdog: sp5100_tco: Immediately trigger upon starting.Gregory Oakes1-0/+4
commit 4eda19cc8a29cde3580ed73bf11dc73b4e757697 upstream. The watchdog countdown is supposed to begin when the device file is opened. Instead, it would begin countdown upon the first write to or close of the device file. Now, the ping operation is called within the start operation which ensures the countdown begins. From experimenation, it does not appear possible to do this with a single write including both the start bit and the trigger bit. So, it is done as two distinct writes. Signed-off-by: Gregory Oakes <gregory.oakes@amd.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230316201312.17538-1-gregory.oakes@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-17watchdog: dw_wdt: Fix the error handling path of dw_wdt_drv_probe()Christophe JAILLET1-2/+5
[ Upstream commit 7f5390750645756bd5da2b24fac285f2654dd922 ] The commit in Fixes has only updated the remove function and missed the error handling path of the probe. Add the missing reset_control_assert() call. Fixes: 65a3b6935d92 ("watchdog: dw_wdt: get reset lines from dt") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/fbb650650bbb33a8fa2fd028c23157bedeed50e1.1682491863.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11watchdog: sbsa_wdog: Make sure the timeout programming is within the limitsGeorge Cherian1-0/+1
[ Upstream commit 000987a38b53c172f435142a4026dd71378ca464 ] Make sure to honour the max_hw_heartbeat_ms while programming the timeout value to WOR. Clamp the timeout passed to sbsa_gwdt_set_timeout() to make sure the programmed value is within the permissible range. Fixes: abd3ac7902fb ("watchdog: sbsa: Support architecture version 1") Signed-off-by: George Cherian <george.cherian@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230209021117.1512097-1-george.cherian@marvell.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11watchdog: pcwd_usb: Fix attempting to access uninitialized memoryLi Hua1-2/+4
[ Upstream commit 7d06c07c67100fd0f8e6b3ab7145ce789f788117 ] The stack variable msb and lsb may be used uninitialized in function usb_pcwd_get_temperature and usb_pcwd_get_timeleft when usb card no response. The build waring is: drivers/watchdog/pcwd_usb.c:336:22: error: ‘lsb’ is used uninitialized in this function [-Werror=uninitialized] *temperature = (lsb * 9 / 5) + 32; ~~~~^~~ drivers/watchdog/pcwd_usb.c:328:21: note: ‘lsb’ was declared here unsigned char msb, lsb; ^~~ cc1: all warnings being treated as errors scripts/Makefile.build:250: recipe for target 'drivers/watchdog/pcwd_usb.o' failed make[3]: *** [drivers/watchdog/pcwd_usb.o] Error 1 Fixes: b7e04f8c61a4 ("mv watchdog tree under drivers") Signed-off-by: Li Hua <hucool.lihua@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221116020706.70847-1-hucool.lihua@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11watchdog: Fix kmemleak in watchdog_cdev_registerChen Jun1-1/+1
[ Upstream commit 13721a2ac66b246f5802ba1b75ad8637e53eeecc ] kmemleak reports memory leaks in watchdog_dev_register, as follows: unreferenced object 0xffff888116233000 (size 2048): comm ""modprobe"", pid 28147, jiffies 4353426116 (age 61.741s) hex dump (first 32 bytes): 80 fa b9 05 81 88 ff ff 08 30 23 16 81 88 ff ff .........0#..... 08 30 23 16 81 88 ff ff 00 00 00 00 00 00 00 00 .0#............. backtrace: [<000000007f001ffd>] __kmem_cache_alloc_node+0x157/0x220 [<000000006a389304>] kmalloc_trace+0x21/0x110 [<000000008d640eea>] watchdog_dev_register+0x4e/0x780 [watchdog] [<0000000053c9f248>] __watchdog_register_device+0x4f0/0x680 [watchdog] [<00000000b2979824>] watchdog_register_device+0xd2/0x110 [watchdog] [<000000001f730178>] 0xffffffffc10880ae [<000000007a1a8bcc>] do_one_initcall+0xcb/0x4d0 [<00000000b98be325>] do_init_module+0x1ca/0x5f0 [<0000000046d08e7c>] load_module+0x6133/0x70f0 ... unreferenced object 0xffff888105b9fa80 (size 16): comm ""modprobe"", pid 28147, jiffies 4353426116 (age 61.741s) hex dump (first 16 bytes): 77 61 74 63 68 64 6f 67 31 00 b9 05 81 88 ff ff watchdog1....... backtrace: [<000000007f001ffd>] __kmem_cache_alloc_node+0x157/0x220 [<00000000486ab89b>] __kmalloc_node_track_caller+0x44/0x1b0 [<000000005a39aab0>] kvasprintf+0xb5/0x140 [<0000000024806f85>] kvasprintf_const+0x55/0x180 [<000000009276cb7f>] kobject_set_name_vargs+0x56/0x150 [<00000000a92e820b>] dev_set_name+0xab/0xe0 [<00000000cec812c6>] watchdog_dev_register+0x285/0x780 [watchdog] [<0000000053c9f248>] __watchdog_register_device+0x4f0/0x680 [watchdog] [<00000000b2979824>] watchdog_register_device+0xd2/0x110 [watchdog] [<000000001f730178>] 0xffffffffc10880ae [<000000007a1a8bcc>] do_one_initcall+0xcb/0x4d0 [<00000000b98be325>] do_init_module+0x1ca/0x5f0 [<0000000046d08e7c>] load_module+0x6133/0x70f0 ... The reason is that put_device is not be called if cdev_device_add fails and wdd->id != 0. watchdog_cdev_register wd_data = kzalloc [1] err = dev_set_name [2] .. err = cdev_device_add if (err) { if (wdd->id == 0) { // wdd->id != 0 .. } return err; // [1],[2] would be leaked To fix it, call put_device in all wdd->id cases. Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev") Signed-off-by: Chen Jun <chenjun102@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221116012714.102066-1-chenjun102@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in ↵ruanjinjie1-4/+3
error path [ Upstream commit 07bec0e09c1afbab4c5674fd2341f4f52d594f30 ] free_irq() is missing in case of error in at91_wdt_init(), use devm_request_irq to fix that. Fixes: 5161b31dc39a ("watchdog: at91sam9_wdt: better watchdog support") Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221116094950.3141943-1-ruanjinjie@huawei.com [groeck: Adjust multi-line alignment] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11watchdog: rzg2l_wdt: Handle TYPE-B reset for RZ/V2MFabrizio Castro1-1/+36
[ Upstream commit f769f97917c1e756e12ff042a93f6e3167254b5b ] As per section 48.4 of the HW User Manual, IPs in the RZ/V2M SoC need either a TYPE-A reset sequence or a TYPE-B reset sequence. More specifically, the watchdog IP needs a TYPE-B reset sequence. If the proper reset sequence isn't implemented, then resetting IPs may lead to undesired behaviour. In the restart callback of the watchdog driver the reset has basically no effect on the desired funcionality, as the register writes following the reset happen before the IP manages to come out of reset. Implement the TYPE-B reset sequence in the watchdog driver to address the issues with the restart callback on RZ/V2M. Fixes: ec122fd94eeb ("watchdog: rzg2l_wdt: Add rzv2m support") Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20221117114907.138583-3-fabrizio.castro.jz@renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11watchdog: rzg2l_wdt: Issue a reset before we put the PM clocksLad Prabhakar1-6/+4
[ Upstream commit 6ba6f0f5910d5916539268c0ad55657bb8940616 ] On RZ/Five SoC it was observed that setting timeout (to say 1 sec) wouldn't reset the system. The procedure described in the HW manual (Procedure for Activating Modules) for activating the target module states we need to start supply of the clock module before applying the reset signal. This patch makes sure we follow the same procedure to clear the registers of the WDT module, fixing the issues seen on RZ/Five SoC. While at it re-used rzg2l_wdt_stop() in rzg2l_wdt_set_timeout() as it has the same function calls. Fixes: 4055ee81009e ("watchdog: rzg2l_wdt: Add set_timeout callback") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20221117114907.138583-2-fabrizio.castro.jz@renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-09watchdog: diag288_wdt: fix __diag288() inline assemblyAlexander Egorenkov1-1/+1
commit 32e40f9506b9e32917eb73154f93037b443124d1 upstream. The DIAG 288 statement consumes an EBCDIC string the address of which is passed in a register. Use a "memory" clobber to tell the compiler that memory is accessed within the inline assembly. Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-09watchdog: diag288_wdt: do not use stack buffers for hardware dataAlexander Egorenkov1-2/+11
commit fe8973a3ad0905cb9ba2d42db42ed51de14737df upstream. With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space. Data passed to a hardware or a hypervisor interface that requires V=R can no longer be allocated on the stack. Use kmalloc() to get memory for a diag288 command. Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already runningMika Westerberg1-7/+14
[ Upstream commit ef9b7bf52c2f47f0a9bf988543c577b92c92d15e ] Daniel reported that the commit 1ae3e78c0820 ("watchdog: iTCO_wdt: No need to stop the timer in probe") makes QEMU implementation of the iTCO watchdog not to trigger reboot anymore when NO_REBOOT flag is initially cleared using this option (in QEMU command line): -global ICH9-LPC.noreboot=false The problem with the commit is that it left the unconditional setting of NO_REBOOT that is not cleared anymore when the kernel keeps pinging the watchdog (as opposed to the previous code that called iTCO_wdt_stop() that cleared it). Fix this so that we only set NO_REBOOT if the watchdog was not initially running. Fixes: 1ae3e78c0820 ("watchdog: iTCO_wdt: No need to stop the timer in probe") Reported-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221028062750.45451-1-mika.westerberg@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-01Merge tag 'linux-watchdog-6.1-rc4' of ↵Linus Torvalds2-2/+4
git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: - fix use after free in exar driver - spelling fix in comment * tag 'linux-watchdog-6.1-rc4' of git://www.linux-watchdog.org/linux-watchdog: drivers: watchdog: exar_wdt.c fix use after free watchdog: sp805_wdt: fix spelling typo in comment
2022-10-21Merge tag 'linux-watchdog-6.1-rc2' of ↵Linus Torvalds2-2/+14
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add tracing events for the most common watchdog events * tag 'linux-watchdog-6.1-rc2' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Add tracing events for the most usual watchdog events
2022-10-19drivers: watchdog: exar_wdt.c fix use after freeManank Patel1-1/+3
fix use after free by storing the result of PTR_ERR(n->pdev) to a local variable before returning. Signed-off-by: Manank Patel <pmanank200502@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221013095258.1424967-1-pmanank200502@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-19watchdog: sp805_wdt: fix spelling typo in commentJiangshan Yi1-1/+1
Fix spelling typo in comment. Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221009083944.2988237-1-13667453960@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-13Merge tag 'linux-watchdog-6.1-rc1' of ↵Linus Torvalds22-105/+808
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - new driver for Exar/MaxLinear XR28V38x - support for exynosautov9 SoC - support for Renesas R-Car V5H (R8A779G0) and RZ/V2M (r9a09g011) SoC - support for imx93 - several other fixes and improvements * tag 'linux-watchdog-6.1-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits) watchdog: twl4030_wdt: add missing mod_devicetable.h include dt-bindings: watchdog: migrate mt7621 text bindings to YAML watchdog: sp5100_tco: Add "action" module parameter watchdog: imx93: add watchdog timer on imx93 watchdog: imx7ulp_wdt: init wdog when it was active watchdog: imx7ulp_wdt: Handle wdog reconfigure failure watchdog: imx7ulp_wdt: Fix RCS timeout issue watchdog: imx7ulp_wdt: Check CMD32EN in wdog init watchdog: imx7ulp: Add explict memory barrier for unlock sequence watchdog: imx7ulp: Move suspend/resume to noirq phase watchdog: rti-wdt:using the pm_runtime_resume_and_get to simplify the code dt-bindings: watchdog: rockchip: add rockchip,rk3128-wdt watchdog: s3c2410_wdt: support exynosautov9 watchdog dt-bindings: watchdog: add exynosautov9 compatible watchdog: npcm: Enable clock if provided watchdog: meson: keep running if already active watchdog: dt-bindings: atmel,at91sam9-wdt: convert to json-schema watchdog: armada_37xx_wdt: Fix .set_timeout callback watchdog: sa1100: make variable sa1100dog_driver static watchdog: w83977f_wdt: Fix comment typo ...
generated by cgit v1.2.3 (git 2.39.0) at 2026-04-30 04:58:56 +0300