summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)AuthorFilesLines
2015-07-02Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds16-155/+870
Pull watchdog updates from Wim Van Sebroeck: "This contains: - new driver for ST's LPC Watchdog - new driver for Conexant Digicolor CX92755 SoC - new driver for DA9062 watchdog - Addition of the watchdog registration deferral mechanism - several improvements on omap_wdt - several improvements and reboot-support for imgpdc_wdt - max63xx_wdt improvements - imx2_wdt improvements - dw_wdt improvements - and other small improvements and fixes" * git://www.linux-watchdog.org/linux-watchdog: (37 commits) watchdog: omap_wdt: early_enable module parameter watchdog: gpio_wdt: Add option for early registration watchdog: watchdog_core: Add watchdog registration deferral mechanism watchdog: max63xx: dynamically allocate device watchdog: imx2_wdt: Disable previously acquired clock on error path watchdog: imx2_wdt: Check for clk_prepare_enable() error watchdog: hpwdt: Add support for WDIOC_SETOPTIONS watchdog: docs: omap_wdt also understands nowayout watchdog: omap_wdt: implement get_timeleft watchdog: da9062: DA9062 watchdog driver watchdog: imx2_wdt: set watchdog parent device watchdog: mena21_wdt: Fix possible NULL pointer dereference watchdog: dw_wdt: keepalive the watchdog at write time watchdog: dw_wdt: No need for a spinlock watchdog: imx2_wdt: also set wdog->timeout to new_timeout watchdog: Allow compile test of GPIO consumers if !GPIOLIB watchdog: cadence: Add dependency on HAS_IOMEM watchdog: max63xx_wdt: Constify platform_device_id watchdog: MAX63XX_WATCHDOG does not depend on ARM watchdog: imgpdc: Add some documentation about the timeout ...
2015-07-01watchdog: omap_wdt: early_enable module parameterLars Poeschel1-0/+8
Add a early_enable module parameter to the omap_wdt that starts the watchdog on module insertion. The default value is 0 which does not start the watchdog - which also does not change the behavior if the parameter is not given. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29watchdog: gpio_wdt: Add option for early registrationJean-Baptiste Theou2-0/+21
In some situation, mainly when it's not possible to disable a watchdog, you may want the watchdog driver to be started as soon as possible. Adding GPIO_WATCHDOG_ARCH_INITCALL to raise initcall from module_init to arch_initcall. This patch require watchdog registration deferral mechanism Signed-off-by: Jean-Baptiste Theou <jtheou@adeneo-embedded.us> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29watchdog: watchdog_core: Add watchdog registration deferral mechanismJean-Baptiste Theou1-18/+100
Currently, watchdog subsystem require the misc subsystem to register a watchdog. This may not be the case in case of an early registration of a watchdog, which can be required when the watchdog cannot be disabled. This patch introduces a deferral mechanism to remove this requirement. Signed-off-by: Jean-Baptiste Theou <jtheou@adeneo-embedded.us> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29watchdog: max63xx: dynamically allocate deviceVivien Didelot1-66/+104
This patch removes the static watchdog device for a new max63xx_wdt data structure, and constifies the max63xx_timeout data. The new structure contains pointers to pin access routines, which abstracts mmap-specific code. This will ease future accesses like GPIO. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-26Merge tag 'armsoc-soc' of ↵Linus Torvalds1-0/+62
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform support updates from Kevin Hilman: "Our SoC branch usually contains expanded support for new SoCs and other core platform code. Some highlights from this round: - sunxi: SMP support for A23 SoC - socpga: big-endian support - pxa: conversion to common clock framework - bcm: SMP support for BCM63138 - imx: support new I.MX7D SoC - zte: basic support for ZX296702 SoC" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits) ARM: zx: Add basic defconfig support for ZX296702 ARM: dts: zx: add an initial zx296702 dts and doc clk: zx: add clock support to zx296702 dt-bindings: Add #defines for ZTE ZX296702 clocks ARM: socfpga: fix build error due to secondary_startup MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS ARM: ep93xx: simone: support for SPI-based MMC/SD cards MAINTAINERS: update Shawn's email to use kernel.org one ARM: socfpga: support suspend to ram ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10 ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5 ARM: EXYNOS: register power domain driver from core_initcall ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs ARM: SAMSUNG: Constify platform_device_id ARM: EXYNOS: Constify irq_domain_ops ARM: EXYNOS: add coupled cpuidle support for Exynos3250 ARM: EXYNOS: add exynos_get_boot_addr() helper ARM: EXYNOS: add exynos_set_boot_addr() helper ARM: EXYNOS: make exynos_core_restart() less verbose ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout ...
2015-06-26watchdog: imx2_wdt: Disable previously acquired clock on error pathFabio Estevam1-1/+5
If watchdog_register_device() fails we should disable the previously acquired wdev->clk clock on error path. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-26watchdog: imx2_wdt: Check for clk_prepare_enable() errorFabio Estevam1-2/+7
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: hpwdt: Add support for WDIOC_SETOPTIONSJean Delvare1-1/+15
WDIOC_SETOPTIONS makes it possible to disable and re-enable the watchdog timer while the hpwdt driver is loaded. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: omap_wdt: implement get_timeleftLars Poeschel2-0/+12
The omap watchdog hardware is able to read the watchdog timer counter register. This implements this functionality in the omap_wdt driver, so one is can read the time until the watchdog will trigger the reset in seconds using WDIOC_GETTIMELEFT. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: da9062: DA9062 watchdog driverS Twiss3-0/+263
Add watchdog driver support for DA9062 Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: imx2_wdt: set watchdog parent deviceVladimir Zapolskiy1-0/+1
If on watchdog device registration a parent device is not set, then the registered watchdog is considered to be a virtual device: /sys/devices/virtual/watchdog/watchdog0 /sys/devices/virtual/watchdog/watchdog1 Setting a correct reference to a platform device allows to distinguish multiple instances of iMX2+ hardware watchdogs: /sys/devices/soc0/soc/2000000.aips-bus/20bc000.wdog/watchdog/watchdog0 /sys/devices/soc0/soc/2000000.aips-bus/20c0000.wdog/watchdog/watchdog1 Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: mena21_wdt: Fix possible NULL pointer dereferenceJohannes Thumshirn1-2/+3
In a21_wdt_remove() we do a watchdog_unregister_device() on struct a21_wdt_drv->wdt but never assign it. Also move the dev_set_drvdata() call in front of the watchdog_register_device() call, so it doesn't look like an error. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: dw_wdt: keepalive the watchdog at write timeDoug Anderson1-0/+1
If you've got code that does this in a tight loop 1. Open watchdog 2. Send 'expect close' 3. Close watchdog ...you'll eventually trigger a watchdog reset. You can reproduce this by using daisydog (1) and running: while true; do daisydog -c > /dev/null; done The problem is that each time you write to the watchdog for 'expect close' it moves the timer .5 seconds out. The timer thus never fires and never pats the watchdog for you. 1: http://git.chromium.org/gitweb/?p=chromiumos/third_party/daisydog.git Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: dw_wdt: No need for a spinlockDoug Anderson1-7/+0
Right now the dw_wdt uses a spinlock to protect dw_wdt_open(). The problem is that while holding the spinlock we call: -> dw_wdt_set_top() -> dw_wdt_top_in_seconds() -> clk_get_rate() -> clk_prepare_lock() -> mutex_lock() Locking a mutex while holding a spinlock is not allowed and leads to warnings like "BUG: spinlock wrong CPU on CPU#1", among other problems. There's no reason to use a spinlock. Only dw_wdt_open() was protected and the test_and_set_bit() at the start of that function protects us anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: imx2_wdt: also set wdog->timeout to new_timeoutMichael Grzeschik1-0/+2
Commit faad5de0b104 ("watchdog: imx2_wdt: convert to watchdog core api") removes the custom ioctl function. The generic ioctl handler is not setting the wdog->timeout to the new_timeout but handing this preset value back to the userspace. This patch sets the new value in the drivers set_timeout function to fix that problem. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven1-1/+1
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
2015-06-22watchdog: cadence: Add dependency on HAS_IOMEMRichard Weinberger1-0/+1
Not all architectures have io memory. Fixes: drivers/built-in.o: In function `cdns_wdt_probe': cadence_wdt.c:(.text+0x33b7c9): undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: max63xx_wdt: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: MAX63XX_WATCHDOG does not depend on ARMVivien Didelot1-1/+1
Remove the ARM Kconfig dependency since the Maxim MAX63xx devices are architecture independent. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: imgpdc: Add some documentation about the timeoutEzequiel Garcia1-0/+29
This watchdog hardware can be configured in terms of power-of-two clock cycles. Therefore, the watchdog timeout configured by the user will be rounded-up to the next possible hardware timeout. This commit adds a comment explaining this. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: imgpdc: Fix max timeoutEzequiel Garcia1-1/+5
Maximum timeout is currently set in clock cycles, but the watchdog core expects it to be in seconds. Fix it. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: imgpdc: Add reboot supportAndrew Bresticker1-0/+21
Register a restart handler that will restart the system by writing to the watchdog's SOFT_RESET register. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: imgpdc: Set timeout before starting watchdogAndrew Bresticker1-5/+13
Set up the watchdog for the specified timeout before attempting to start it. Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: imgpdc: Allow timeout to be set in device-treeAndrew Bresticker1-7/+3
Since the heartbeat is statically initialized to its default value, watchdog_init_timeout() will never look in the device-tree for a timeout-sec value. Instead of statically initializing heartbeat, fall back to the default timeout value if watchdog_init_timeout() fails. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: omap: assert the counter being stopped before reprogrammingUwe Kleine-König1-0/+7
The omap watchdog has the annoying behaviour that writes to most registers don't have any effect when the watchdog is already running. Quoting the AM335x reference manual: To modify the timer counter value (the WDT_WCRR register), prescaler ratio (the WDT_WCLR[4:2] PTV bit field), delay configuration value (the WDT_WDLY[31:0] DLY_VALUE bit field), or the load value (the WDT_WLDR[31:0] TIMER_LOAD bit field), the watchdog timer must be disabled by using the start/stop sequence (the WDT_WSPR register). Currently the timer is stopped in the .probe callback but still there are possibilities that yield to a situation where omap_wdt_start is entered with the timer running (e.g. when /dev/watchdog is closed without stopping and then reopened). In such a case programming the timeout silently fails! To circumvent this stop the timer before reprogramming. Assuming one of the first things the watchdog user does is setting the timeout explicitly nothing too bad should happen because this explicit setting works fine. Fixes: 7768a13c252a ("[PATCH] OMAP: Add Watchdog driver support") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: omap: simplify assignment of bootstatusUwe Kleine-König1-7/+5
Instead of using an over-long expression involving the ?: operator use an if and instead of an else branch rely on the fact that the data structure was allocated using devm_kzalloc. This also allows to put the used helper variable into a more local scope. There is no functional change. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: omap: put struct watchdog_device into driver dataUwe Kleine-König1-31/+24
This way only a single allocation is needed (per device). Also this simplifies the data structure used by the driver because there is no need anymore to link from one struct to the other (by means of watchdog_{set,get}_drvdata). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: omap: use watchdog_init_timeout instead of open coding itUwe Kleine-König1-4/+1
Instead of (partly) open coding watchdog_init_timeout to determine the inital timeout use the core function that exists for exactly this purpose. As a side effect the "timeout-sec" device-tree property is recognized now (though currently unused in the omap device trees). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: digicolor: driver for Conexant Digicolor CX92755 SoCBaruch Siach3-0/+216
This commit add a driver for the watchdog functionality of the Conexant CX92755 SoC, from the Digicolor series of SoCs. Of 8 system timers provided by the CX92755, the first one, timer A, can reset the chip when its counter reaches zero. This driver uses this capability to provide userspace with a standard watchdog, using the watchdog timer driver core framework. This driver also implements a reboot handler for the reboot(2) system call. The watchdog driver shares the timer registers with the CX92755 timer driver (drivers/clocksource/timer-digicolor.c). The timer driver, however, uses only timers other than A, so both drivers should coexist. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: at91sam9: use endian agnostic IOBen Dooks1-2/+2
Use endian agnostic IO functions for the watchdog driver for when it is enabled on ATSAMA5D36 devices running in big endian. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: st_wdt: Update IP layout information to include ClocksourceLee Jones1-1/+1
Initial submission adding support for this IP only included Watchdog and the Real-Time Clock. Now the third (and final) device is enabled this trivial patch is required to update the comment in the Watchdog driver to encompass Clocksource. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: st_wdt: Add new driver for ST's LPC WatchdogLee Jones3-0/+357
Signed-off-by: David Paris <david.paris@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-05-14ARM: bcm2835: Move the restart/power_off handling to the WDT driverEric Anholt1-0/+62
Since the WDT is what's used to drive restart and power off, it makes more sense to keep it there, where the regs are already mapped and definitions for them provided. Note that this means you may need to add CONFIG_BCM2835_WDT to retain functionality of your kernel. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-04-30watchdog: st_wdt: Add new driver for ST's LPC WatchdogLee Jones3-0/+357
Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David Paris <david.paris@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-04-22Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds6-174/+83
Pull watchdog updates from Wim Van Sebroeck: "This contains following changes: - Octeon: convert to watchdog-API and apply some fixes - Cadence wdt: remove dependency on ARCH - add DT bindings for qcom + msm - bcm281xx: Remove use of seq_printf return value - stmp3xxx_rtc_wdt + pnx4008_wdt: fix broken email addresses" * git://www.linux-watchdog.org/linux-watchdog: watchdog: stmp3xxx_rtc_wdt: fix broken email address watchdog: pnx4008_wdt: fix broken email address watchdog: octeon: use fixed length string for register names watchdog: octeon: fix some trivial coding style issues watchdog: octeon: convert to WATCHDOG_CORE API watchdog: cadence: Remove Kconfig dependency on ARCH ARM: msm: add watchdog entries to DT timer binding doc ARM: qcom: add description of KPSS WDT for IPQ8064 watchdog: qcom: use timer devicetree binding watchdog: bcm281xx: Remove use of seq_printf return value
2015-04-22Merge tag 'armsoc-drivers' of ↵Linus Torvalds2-8/+55
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for v4.1. Some of these are for drivers/soc, where we find more and more SoC-specific drivers these days. Some are for other driver subsystems where we have received acks from the appropriate maintainers. The larger parts of this branch are: - MediaTek support for their PMIC wrapper interface, a high-level interface for talking to the system PMIC over a dedicated I2C interface. - Qualcomm SCM driver has been moved to drivers/firmware. It's used for CPU up/down and needs to be in a shared location for arm/arm64 common code. - cleanup of ARM-CCI PMU code. - another set of cleanusp to the OMAP GPMC code" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) soc/mediatek: Remove unused variables clocksource: atmel-st: select MFD_SYSCON soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs arm-cci: Fix CCI PMU event validation arm-cci: Split the code for PMU vs driver support arm-cci: Get rid of secure transactions for PMU driver arm-cci: Abstract the CCI400 PMU specific definitions arm-cci: Rearrange code for splitting PMU vs driver code drivers: cci: reject groups spanning multiple HW PMUs ARM: at91: remove useless include clocksource: atmel-st: remove mach/hardware dependency clocksource: atmel-st: use syscon/regmap ARM: at91: time: move the system timer driver to drivers/clocksource ARM: at91: properly initialize timer ARM: at91: at91rm9200: remove deprecated arm_pm_restart watchdog: at91rm9200: implement restart handler watchdog: at91rm9200: use the system timer syscon mfd: syscon: Add atmel system timer registers definition ARM: at91/dt: declare atmel,at91rm9200-st as a syscon soc: qcom: gsbi: Add support for ADM CRCI muxing ...
2015-04-22watchdog: stmp3xxx_rtc_wdt: fix broken email addressWolfram Sang1-2/+2
My Pengutronix address is not valid anymore, redirect people to the Pengutronix kernel team. Reported-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22watchdog: pnx4008_wdt: fix broken email addressWolfram Sang1-1/+1
My Pengutronix address is not valid anymore, redirect people to the Pengutronix kernel team. Reported-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22watchdog: octeon: use fixed length string for register namesAaro Koskinen1-1/+1
Use fixed length string for register names. This saves 416 bytes in text size. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22watchdog: octeon: fix some trivial coding style issuesAaro Koskinen1-6/+10
Fix some trivial coding style issues to reduce noise from static analyzers. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22watchdog: octeon: convert to WATCHDOG_CORE APIAaro Koskinen2-147/+39
Convert OCTEON watchdog to WATCHDOG_CORE API. This enables support for multiple watchdogs on OCTEON boards. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22watchdog: cadence: Remove Kconfig dependency on ARCHMichal Simek1-1/+0
Remove Kconfig dependency and enable driver for all ARCHs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22watchdog: qcom: use timer devicetree bindingMathieu Olivari1-6/+15
MSM watchdog configuration happens in the same register block as the timer, so we'll use the same binding as the existing timer. The qcom-wdt will now be probed when devicetree has an entry compatible with "qcom,kpss-timer" or "qcom-scss-timer". Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22watchdog: bcm281xx: Remove use of seq_printf return valueJoe Perches1-11/+16
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Guenter Roeck <linux~roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-15Merge branch 'for-linus' of ↵Linus Torvalds1-15/+5
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "The major change in this merge is the removal of the support for 31-bit kernels. Naturally 31-bit user space will continue to work via the compat layer. And then some cleanup, some improvements and bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits) s390/smp: wait until secondaries are active & online s390/hibernate: fix save and restore of kernel text section s390/cacheinfo: add missing facility check s390/syscalls: simplify syscall_get_arch() s390/irq: enforce correct irqclass_sub_desc array size s390: remove "64" suffix from mem64.S and swsusp_asm64.S s390/ipl: cleanup macro usage s390/ipl: cleanup shutdown_action attributes s390/ipl: cleanup bin attr usage s390/uprobes: fix address space annotation s390: add missing arch_release_task_struct() declaration s390: make couple of functions and variables static s390/maccess: improve s390_kernel_write() s390/maccess: remove potentially broken probe_kernel_write() s390/watchdog: support for KVM hypervisors and delete pr_info messages s390/watchdog: enable KEEPALIVE for /dev/watchdog s390/dasd: remove setting of scheduler from driver s390/traps: panic() instead of die() on translation exception s390: remove test_facility(2) (== z/Architecture mode active) checks s390/cmpxchg: simplify cmpxchg_double ...
2015-04-10Merge back earlier suspend/hibernate material for v4.1.Rafael J. Wysocki1-0/+51
2015-04-03Merge tag 'arm-perf-4.1' of ↵Olof Johansson1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into next/drivers Merge "arm-cci PMU updates for 4.1" from Will Deacon: CCI-400 PMU updates This series reworks some of the CCI-400 PMU code so that it can be used on both ARM and ARM64-based systems, without the need to boot in secure mode on the latter. This paves the way for CCI-500 support in future. * tag 'arm-perf-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: arm-cci: Fix CCI PMU event validation arm-cci: Split the code for PMU vs driver support arm-cci: Get rid of secure transactions for PMU driver arm-cci: Abstract the CCI400 PMU specific definitions arm-cci: Rearrange code for splitting PMU vs driver code drivers: cci: reject groups spanning multiple HW PMUs + Linux 4.0-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03PM / watchdog: iTCO: stop watchdog during system suspendRafael J. Wysocki1-0/+51
If the target sleep state of the system is not an ACPI sleep state (S1, S2 or S3), the TCO watchdog needs to be stopped during system suspend, because it may not be possible to ping it any more after timekeeping has been suspended (suspend-to-idle does that for one example). For this reason, provide ->suspend_noirq and ->resume_noirq callbacks for the iTCO watchdog driver and use them to stop and restart the watchdog during system suspend and resume, respectively, if the system is not going to enter an ACPI sleep state (in which case the watchdog will be stopped by the platform firmware before the state is entered). Reported-and-tested-by: Borun Fu <borun.fu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-03-27watchdog: imgpdc: Fix default heartbeatJames Hogan1-3/+3
The IMG PDC watchdog driver heartbeat module parameter has no default so it is initialised to zero. This results in the following warning during probe: imgpdc-wdt 2006000.wdt: Initial timeout out of range! setting max timeout The module parameter description implies that the default value should be PDC_WDT_DEF_TIMEOUT, which isn't yet used, so initialise it to that. Also tweak the heartbeat module parameter description for consistency. Fixes: 93937669e9b5 ("watchdog: ImgTec PDC Watchdog Timer Driver") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Naidu Tellapati <Naidu.Tellapati@imgtec.com> Cc: Jude Abraham <Jude.Abraham@imgtec.com> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 17:16:17 +0300