summaryrefslogtreecommitdiff
path: root/drivers/watchdog/omap_wdt.c
AgeCommit message (Collapse)AuthorFilesLines
2021-10-26watchdog: Fix OMAP watchdog early handlingWalter Stoll1-1/+5
TI's implementation does not service the watchdog even if the kernel command line parameter omap_wdt.early_enable is set to 1. This patch fixes the issue. Signed-off-by: Walter Stoll <walter.stoll@duagon.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/88a8fe5229cd68fa0f1fd22f5d66666c1b7057a0.camel@duagon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-05-25watchdog: Fix runtime PM imbalance on errorDinghao Liu1-0/+1
When watchdog_register_device() returns an error code, a pairing runtime PM usage counter decrement is needed to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200521080141.24373-1-dinghao.liu@zju.edu.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: convert remaining drivers to use SPDX license identifierGuenter Roeck1-4/+2
This gets rid of the unnecessary license boilerplate, and avoids having to deal with individual patches one by one. No functional changes. Reviewed-by: Jerry Hoemann <jerry.hoemann@hpe.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-05-05watchdog: Convert to use devm_platform_ioremap_resourceGuenter Roeck1-3/+1
Use devm_platform_ioremap_resource to reduce source code size, improve readability, and reduce the likelyhood of bugs. The conversion was done automatically with coccinelle using the following semantic patch. @r@ identifier res, pdev; expression a; expression index; expression e; @@ <+... - res = platform_get_resource(pdev, IORESOURCE_MEM, index); - a = devm_ioremap_resource(e, res); + a = devm_platform_ioremap_resource(pdev, index); ...+> @depends on r@ identifier r.res; @@ - struct resource *res; ... when != res @@ identifier res, pdev; expression index; expression a; @@ - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, index); - a = devm_ioremap_resource(&pdev->dev, res); + a = devm_platform_ioremap_resource(pdev, index); Cc: Joel Stanley <joel@jms.id.au> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Avi Fishman <avifishman70@gmail.com> Cc: Nancy Yuen <yuenn@google.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Barry Song <baohua@kernel.org> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Michal Simek <michal.simek@xilinx.com> (cadence/xilinx wdts) Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap1-0/+1
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03watchdog: omap_wdt: change order for setting default timeoutMarcus Folkesson1-2/+2
watchdog_init_timeout() will preserve wdd->timeout value if no parameter nor timeout-secs dt property is set. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: omap: don't disable the timer when it should be enabled earlyUwe Kleine-König1-1/+2
With the early_enable module parameter the watchdog can be started during driver probe time. If this is requested the bets are good that the timer is already running, so to narrow the gap where the timer is disabled only call the disable function when the timer shouldn't be started. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: omap: don't disable runtime pm before starting deviceUwe Kleine-König1-2/+2
omap_wdt_start calls pm_runtime_get_sync so dropping a reference just before calling omap_wdt_start doesn't make much sense. Moreover there is no point to use the synchronous variant of pm_runtime_put because the driver doesn't care if the clock is disabled before or after omap_wdt_probe returns. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-11-23watchdog: omap_wdt: fix null pointer dereferencePeter Robinson1-1/+1
Fix issue from two patches overlapping causing a kernel oops [ 3569.297449] Unable to handle kernel NULL pointer dereference at virtual address 00000088 [ 3569.306272] pgd = dc894000 [ 3569.309287] [00000088] *pgd=00000000 [ 3569.313104] Internal error: Oops: 5 [#1] SMP ARM [ 3569.317986] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_filter ebtable_nat ebtable_broute bridge stp llc ebtables ip6table_security ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_filter ip6_tables iptable_security iptable_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle musb_dsps cppi41 musb_hdrc phy_am335x udc_core phy_generic phy_am335x_control omap_sham omap_aes omap_rng omap_hwspinlock omap_mailbox hwspinlock_core musb_am335x omap_wdt at24 8250_omap leds_gpio cpufreq_dt smsc davinci_mdio mmc_block ti_cpsw cpsw_common ptp pps_core cpsw_ale davinci_cpdma omap_hsmmc omap_dma mmc_core i2c_dev [ 3569.386293] CPU: 0 PID: 1429 Comm: wdctl Not tainted 4.3.0-0.rc7.git0.1.fc24.armv7hl #1 [ 3569.394740] Hardware name: Generic AM33XX (Flattened Device Tree) [ 3569.401179] task: dbd11a00 ti: dbaac000 task.ti: dbaac000 [ 3569.406917] PC is at omap_wdt_get_timeleft+0xc/0x20 [omap_wdt] [ 3569.413106] LR is at watchdog_ioctl+0x3cc/0x42c [ 3569.417902] pc : [<bf0ab138>] lr : [<c0739c54>] psr: 600f0013 [ 3569.417902] sp : dbaadf18 ip : 00000003 fp : 7f5d3bbe [ 3569.430014] r10: 00000000 r9 : 00000003 r8 : bef21ab8 [ 3569.435535] r7 : dbbc0f7c r6 : dbbc0f18 r5 : bef21ab8 r4 : 00000000 [ 3569.442427] r3 : 00000000 r2 : 00000000 r1 : 8004570a r0 : dbbc0f18 [ 3569.449323] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3569.456858] Control: 10c5387d Table: 9c894019 DAC: 00000051 [ 3569.462927] Process wdctl (pid: 1429, stack limit = 0xdbaac220) [ 3569.469179] Stack: (0xdbaadf18 to 0xdbaae000) [ 3569.473790] df00: bef21ab8 dbf60e38 [ 3569.482441] df20: dc91b840 8004570a bef21ab8 c03988a4 dbaadf48 dc854000 00000000 dd313850 [ 3569.491092] df40: ddf033b8 0000570a dc91b80b dbaadf3c dbf60e38 00000020 c0df9250 c0df6c48 [ 3569.499741] df60: dc91b840 8004570a 00000000 dc91b840 dc91b840 8004570a bef21ab8 00000003 [ 3569.508389] df80: 00000000 c03989d4 bef21b74 7f5d3bad 00000003 00000036 c020fcc4 dbaac000 [ 3569.517037] dfa0: 00000000 c020fb00 bef21b74 7f5d3bad 00000003 8004570a bef21ab8 00000001 [ 3569.525685] dfc0: bef21b74 7f5d3bad 00000003 00000036 00000001 00000000 7f5e4eb0 7f5d3bbe [ 3569.534334] dfe0: 7f5e4f10 bef21a3c 7f5d0a54 b6e97e0c a00f0010 00000003 00000000 00000000 [ 3569.543038] [<bf0ab138>] (omap_wdt_get_timeleft [omap_wdt]) from [<c0739c54>] (watchdog_ioctl+0x3cc/0x42c) [ 3569.553266] [<c0739c54>] (watchdog_ioctl) from [<c03988a4>] (do_vfs_ioctl+0x5bc/0x698) [ 3569.561648] [<c03988a4>] (do_vfs_ioctl) from [<c03989d4>] (SyS_ioctl+0x54/0x7c) [ 3569.569400] [<c03989d4>] (SyS_ioctl) from [<c020fb00>] (ret_fast_syscall+0x0/0x3c) [ 3569.577413] Code: e12fff1e e52de004 e8bd4000 e5903060 (e5933088) [ 3569.584089] ---[ end trace cec3039bd3ae610a ]--- Cc: <stable@vger.kernel.org> # v4.2+ Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09Watchdog: Fix parent of watchdog_devicesPratyush Anand1-0/+1
/sys/class/watchdog/watchdogn/device/modalias can help to identify the driver/module for a given watchdog node. However, many wdt devices do not set their parent and so, we do not see an entry for device in sysfs for such devices. This patch fixes parent of watchdog_device so that /sys/class/watchdog/watchdogn/device is populated. Exceptions: booke, diag288, octeon, softdog and w83627hf -- They do not have any parent. Not sure, how we can identify driver for these devices. Signed-off-by: Pratyush Anand <panand@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-07-01watchdog: omap_wdt: early_enable module parameterLars Poeschel1-0/+8
Add a early_enable module parameter to the omap_wdt that starts the watchdog on module insertion. The default value is 0 which does not start the watchdog - which also does not change the behavior if the parameter is not given. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: omap_wdt: implement get_timeleftLars Poeschel1-0/+11
The omap watchdog hardware is able to read the watchdog timer counter register. This implements this functionality in the omap_wdt driver, so one is can read the time until the watchdog will trigger the reset in seconds using WDIOC_GETTIMELEFT. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: omap: assert the counter being stopped before reprogrammingUwe Kleine-König1-0/+7
The omap watchdog has the annoying behaviour that writes to most registers don't have any effect when the watchdog is already running. Quoting the AM335x reference manual: To modify the timer counter value (the WDT_WCRR register), prescaler ratio (the WDT_WCLR[4:2] PTV bit field), delay configuration value (the WDT_WDLY[31:0] DLY_VALUE bit field), or the load value (the WDT_WLDR[31:0] TIMER_LOAD bit field), the watchdog timer must be disabled by using the start/stop sequence (the WDT_WSPR register). Currently the timer is stopped in the .probe callback but still there are possibilities that yield to a situation where omap_wdt_start is entered with the timer running (e.g. when /dev/watchdog is closed without stopping and then reopened). In such a case programming the timeout silently fails! To circumvent this stop the timer before reprogramming. Assuming one of the first things the watchdog user does is setting the timeout explicitly nothing too bad should happen because this explicit setting works fine. Fixes: 7768a13c252a ("[PATCH] OMAP: Add Watchdog driver support") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: omap: simplify assignment of bootstatusUwe Kleine-König1-7/+5
Instead of using an over-long expression involving the ?: operator use an if and instead of an else branch rely on the fact that the data structure was allocated using devm_kzalloc. This also allows to put the used helper variable into a more local scope. There is no functional change. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: omap: put struct watchdog_device into driver dataUwe Kleine-König1-31/+24
This way only a single allocation is needed (per device). Also this simplifies the data structure used by the driver because there is no need anymore to link from one struct to the other (by means of watchdog_{set,get}_drvdata). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: omap: use watchdog_init_timeout instead of open coding itUwe Kleine-König1-4/+1
Instead of (partly) open coding watchdog_init_timeout to determine the inital timeout use the core function that exists for exactly this purpose. As a side effect the "timeout-sec" device-tree property is recognized now (though currently unused in the omap device trees). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: Fix omap watchdogs to enable the magic close bitTony Lindgren1-1/+1
This allows testing the watchdog easily with distros just by doing pkill -9 watchdog. Reported-by: Thomas Dziedzic <gostrc@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-03-31watchdog: omap_wdt: Use devm_ioremap_resource()Jingoo Han1-16/+6
Use devm_ioremap_resource() in order to make the code simpler, and remove 'struct resource *mem' from 'struct omap_wdt_dev' and omap_wdt_probe(), resplectively. because the 'mem' variables are not used anymore. Also the redundant return value check of platform_get_resource() is removed, because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
2013-11-17watchdog: omap_wdt: raw read and write endian fixVictor Kamensky1-18/+18
All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-11-17watchdog: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: omap_wdt: Add option nowayoutPali Rohár1-1/+5
Like other watchdog drivers, this patch adds new option nowayout which overwrite WATCHDOG_NOWAYOUT. Signed-off-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02watchdog: omap_wdt: eliminate unused variable and a compiler warningAaro Koskinen1-1/+0
We forgot to delete this in the commit 4f4753d9 (watchdog: omap_wdt: convert to devm_ functions), and as a result the following compilation warning was introduced: drivers/watchdog/omap_wdt.c: In function 'omap_wdt_remove': drivers/watchdog/omap_wdt.c:299:19: warning: unused variable 'res' [-Wunused-variable] Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-20watchdog: omap_wdt: eliminate gotoAaro Koskinen1-7/+4
Eliminate a goto to simplify the code. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-20watchdog: omap_wdt: delete redundant platform_set_drvdata() callsAaro Koskinen1-2/+0
It's not needed to manually reset the driver data. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-20watchdog: omap_wdt: convert to devm_ functionsAaro Koskinen1-37/+13
Use devm_kzalloc(), devm_request_mem_region() ande devm_ioremap() to simplify the code. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-20watchdog: omap_wdt: convert to new watchdog coreAaro Koskinen1-149/+111
Convert omap_wdt to new watchdog core. On OMAP boards, there are usually multiple watchdogs. Since the new watchdog core supports multiple watchdogs, all watchdog drivers used on OMAP should be converted. The legacy watchdog device node is still created, so this should not break existing users. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Jarkko Nikula <jarkko.nikula@jollamobile.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-13Merge tag 'pm-merge' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC power management and clock changes from Olof Johansson: "This branch contains a largeish set of updates of power management and clock setup. The bulk of it is for OMAP/AM33xx platforms, but also a few around hotplug/suspend/resume on Exynos. It includes a split-up of some of the OMAP clock data into separate files which adds to the diffstat, but gross delta is fairly reasonable." * tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support watchdog: OMAP: fixup for ARM multiplatform support ARM: EXYNOS: Add flush_cache_all in suspend finisher ARM: EXYNOS: Remove scu_enable from cpuidle ARM: EXYNOS: Fix soft reboot hang after suspend/resume ARM: EXYNOS: Add support for rtc wakeup ARM: EXYNOS: fix the hotplug for Cortex-A15 ARM: OMAP2+: omap_device: Correct resource handling for DT boot ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count ARM: OMAP2+: PRM: initialize some PRM functions early ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n ARM: OMAP4: USB: power down MUSB PHY during boot ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP2xxx: clock: drop obsolete clock data ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections ARM: AM33xx: clock: drop obsolete clock data ARM: OMAP3xxx: clk: drop obsolete clock data ...
2012-12-12Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-14/+12
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-11-30watchdog: OMAP: fixup for ARM multiplatform supportTony Lindgren1-2/+0
Recent changes to the omap_wdt.c removed the dependencies to the core omap code, but forgot to remove mach/hardware.h. We cannot include any plat headers with multiplatform support enabled. cc: Wim Van Sebroeck <wim@iguana.be> cc: linux-watchdog@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-29watchdog: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29watchdog: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-29watchdog: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-08watchdog: OMAP: use standard GETBOOTSTATUS interface; use platform_data fn ptrPaul Walmsley1-14/+12
Previously the OMAP watchdog driver used a non-standard way to report the chip reset source via the GETBOOTSTATUS ioctl. This patch converts the driver to use the standard WDIOF_* flags for this purpose. This patch may break existing userspace code that uses the existing non-standard data format returned by the OMAP watchdog driver's GETBOOTSTATUS ioctl. To fetch detailed reset source information, userspace code will need to retrieve it directly from the CGRM or PRM drivers when those are completed. Previously, to fetch the reset source, the driver either read a register outside the watchdog IP block (OMAP1), or called a function exported directly from arch/arm/mach-omap2. Both approaches are broken. This patch also converts the driver to use a platform_data function pointer. This approach is temporary, and is due to the lack of drivers for the OMAP16xx+ Clock Generation and Reset Management IP block and the OMAP2+ Power and Reset Management IP block. Once drivers are available for those IP blocks, the watchdog driver can be converted to call exported functions from those drivers directly. At that point, the platform_data function pointer can be removed. In the short term, this patch is needed to allow the PRM code to be removed from arch/arm/mach-omap2 (it is being moved to a driver). This version integrates a fix from Jon Hunter <jon-hunter@ti.com> that avoids a NULL pointer dereference in a DT-only boot, and integrates a patch commit message fix from Felipe Balbi <balbi@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Wim Van Sebroeck <wim@iguana.be> Acked-by: Wim Van Sebroeck <wim@iguana.be> [paul@pwsan.com: integrated pdata fix from Jon Hunter] Cc: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: integrated changelog fix from Felipe Balbi] Cc: Felipe Balbi <balbi@ti.com>
2012-09-13ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren1-0/+5
As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-25Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds1-17/+0
Pull watchdog changes from Wim Van Sebroeck: - conversion of iTCO_wdt and orion_wdt to the generic watchdog API - uses module_platform_driver() for s3c2410_wdt - Adds support for Jetway JNF99 Motherboard - various fixes * git://www.linux-watchdog.org/linux-watchdog: watchdog: orion_wdt: Convert driver to watchdog core watchdog: s3c2410_wdt: Use module_platform_driver() watchdog: sch311x_wdt: Fix Polarity when starting watchdog Watchdog: OMAP: Fix the runtime pm code to avoid module getting stuck intransition state. watchdog: ie6xx_wdt: section mismatch in ie6xx_wdt_probe() watchdog: bcm63xx_wdt: fix driver section mismatch watchdog: iTCO_wdt.c: convert to watchdog core char/ipmi: remove local ioctl defines replaced by generic ones watchdog: xilinx: Read clock frequency directly from DT node watchdog: coh901327_wdt: use clk_prepare/unprepare watchdog: f71808e_wdt: Add support for Jetway JNF99 motherboard
2012-07-23Watchdog: OMAP: Fix the runtime pm code to avoid module getting stuck ↵Lokesh Vutla1-17/+0
intransition state. OMAP watchdog driver is adapted to runtime PM like a general device driver but it is not appropriate. It is causing couple of functional issues. 1. On OMAP4 SYSCLK can't be gated, because of issue with WDTIMER2 module, which constantly stays in "in transition" state. Value of register CM_WKUP_WDTIMER2_CLKCTRL is always 0x00010000 in this case. Issue occurs immediately after first idle, when hwmod framework tries to disable WDTIMER2 functional clock - "wd_timer2_fck". After this module falls to "in transition" state, and SYSCLK gating is blocked. 2. Due to runtime PM, watchdog timer may be completely disabled. In current code base watchdog timer is not disabled only because of issue 1. Otherwise state of WDTIMER2 module will be "Disabled", and there will be no interrupts from omap_wdt. In other words watchdog will not work at all. Watchdong is a special IP and it should not be disabled otherwise purpose of it itself is defeated. Watchdog functional clock should never be disabled. This patch updates the runtime PM handling in driver so that runtime PM is limited only during probe/shutdown and suspend/resume. The patch fixes issue 1 and 2 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-09watchdog: omap_wdt: add device tree supportXiao Jiang1-0/+7
Add device table for omap_wdt to support dt. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-27watchdog: Use pr_<fmt> and pr_<level>Joe Perches1-1/+3
Use the current logging styles. Make sure all output has a prefix. Add missing newlines. Remove now unnecessary PFX, NAME, and miscellaneous other #defines. Coalesce formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: omap_wdt.c: Fix the mismatch of pm_runtime enable and disableShubhrajyoti D1-0/+2
Currently the watchdog driver calls the pm_runtime_enable and never the disable. This may cause a warning when pm_runtime_enable checks for the count match. Also fixes the error /build/watchdog # insmod omap_wdt.ko [ 44.999389] omap_wdt omap_wdt: Unbalanced pm_runtime_enable! [ 45.011047] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec /build/watchdog # Attempting to fix the same by calling pm_runtime_disable. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06watchdog: omap_wdt.c: fix the WDIOC_GETBOOTSTATUS ioctl if not implemented.Shubhrajyoti D1-0/+1
WDIOC_GETBOOTSTATUS ioctl is imlemented for cpu_is_omap16xx and cpu_is_omap24xx cpus only. For other cpus it falls through to WDIOC_KEEPALIVE. This patch prevents the fall through. Cc: sricharan <r.sricharan@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06watchdog: convert drivers/watchdog/* to use module_platform_driver()Axel Lin1-12/+1
This patch converts the drivers in drivers/watchdog/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Nicolas Thill <nico@openwrt.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Marc Zyngier <maz@misterjones.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alejandro Cabrera <aldaya@gmail.com> Cc: "George G. Davis" <gdavis@mvista.com> Cc: Sylver Bruneau <sylver.bruneau@googlemail.com> Cc: Vitaly Wool <vital@embeddedalley.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: Timo Kokkonen <timo.t.kokkonen@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06watchdog: Use DEFINE_SPINLOCK() for static spinlocksAxel Lin1-2/+1
Rather than just defining static spinlock_t variables and then initializing them later in init functions, simply define them with DEFINE_SPINLOCK() and remove the calls to spin_lock_init(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Nicolas Thill <nico@openwrt.org> Cc: Heiko Ronsdorf <hero@ihg.uni-duisburg.de> Cc: Rodolfo Giometti <giometti@ascensit.com> Cc: Andrey Panin <pazke@donpac.ru> Cc: Guido Guenther <agx@sigxcpu.org> Cc: Curt E Bruns <curt.e.bruns@intel.com> Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Andrew Victor <linux@maxim.org.za> Cc: George G. Davis <gdavis@mvista.com> Cc: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-11Watchdog: omap_wdt: add fine grain runtime-pmPaul Walmsley1-2/+23
The omap_wdt should only be in full active state when the registers are being accessed. Otherwise the device can be on lower power mode. This patch is based on a patch created by Kalle Jokiniemi: https://patchwork.kernel.org/patch/618231/ which is itself based on a patch created by Atal Shargorodsky: http://lkml.org/lkml/2009/3/10/266. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Tested-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Cc: Wim Van Sebroeck <wim@iguana.be> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Kevin Hilman <khilman@ti.com>
2010-10-26Merge branch 'omap-for-linus' of ↵Linus Torvalds1-35/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+1
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-09-29OMAP: WDT: Use PM runtime APIs instead of clk FW APIsVaradarajan, Charulatha1-35/+7
Call runtime pm APIs pm_runtime_put_sync() and pm_runtime_get_sync() for enabling/disabling the clocks, sysconfig settings instead of using clock FW APIs. Signed-off-by: Charulatha V <charu@ti.com> Acked-by: Cousson, Benoit <b-cousson@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-12-23[WATCHDOG] use resource_size()H Hartley Sweeten1-5/+4
Use resource_size(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Kevin Hilman <khilman@ti.deeprootsystems.com> Cc: Ulrik Bech Hald <ubh@ti.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Vincent Sanders <support@simtec.co.uk> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 18:21:12 +0300