summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2019-10-11Merge tag 'drm-misc-next-2019-10-09-2' of ↵Dave Airlie3-29/+9
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.5: UAPI Changes: -Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun) -fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond) -not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should not reach userspace, but adding here to specifically call that out (Daniel) -i810: Prevent underflow in dispatch ioctls (Dan) -komeda: Add ACLK sysfs attribute (Mihail) -v3d: Allow userspace to clean up after render jobs (Iago) Cross-subsystem Changes: -MAINTAINERS: -Add Alyssa & Steven as panfrost reviewers (Rob) -Add Jernej as DE2 reviewer (Maxime) -Add Chen-Yu as Allwinner maintainer (Maxime) -staging: Make some stack arrays static const (Colin) Core Changes: -ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd) -docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent) -connector: Allow more than 3 possible encoders for a connector (José) -dp_cec: Allow a connector to be associated with a cec device (Dariusz) -various: Fix some compile/sparse warnings (Ville) -mm: Ensure mm node removals are properly serialised (Chris) -panel: Specify the type of panel for drm_panels for later use (Laurent) -panel: Use drm_panel_init to init device and funcs (Laurent) -mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude) -vram: -Add lazy unmapping for gem bo's (Thomas) -Unify and rationalize vram mm and gem vram (Thomas) -Expose vmap and vunmap for gem vram objects (Thomas) -Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas) Driver Changes: -various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris) -ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas) -komeda: -Add error event printing (behind CONFIG) and reg dump support (Lowry) -Add suspend/resume support (Lowry) -Workaround D71 shadow registers not flushing on disable (Lowry) -meson: Add suspend/resume support (Neil) -omap: Miscellaneous refactors and improvements (Tomi/Jyri) -panfrost/shmem: Silence lockdep by using mutex_trylock (Rob) -panfrost: Miscellaneous small fixes (Rob/Steven) -sti: Fix warnings (Benjamin/Linus) -sun4i: -Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan) -A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy) -virtio: -Add module param to switch resource reuse workaround on/off (Gerd) -Avoid calling vmexit while holding spinlock (Gerd) -Use gem shmem helpers instead of ttm (Gerd) -Accommodate command buffer allocations too big for cma (David) Cc: Rob Herring <robh@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lyude Paul <lyude@redhat.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Dariusz Marcinkiewicz <darekm@google.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Raymond Smith <raymond.smith@arm.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Colin Ian King <colin.king@canonical.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mihail Atanassov <Mihail.Atanassov@arm.com> Cc: Lowry Li <Lowry.Li@arm.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Iago Toral Quiroga <itoral@igalia.com> Cc: David Riley <davidriley@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Thu 10 Oct 2019 01:00:47 AM AEST # gpg: using RSA key 732C002572DCAF79 # gpg: Can't check signature: public key not found # Conflicts: # drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c # drivers/gpu/drm/i915/i915_drv.c # drivers/gpu/drm/i915/i915_gem.c # drivers/gpu/drm/i915/i915_gem_gtt.c # drivers/gpu/drm/i915/i915_vma.c From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191009150825.GA227673@art_vandelay
2019-10-05video/logo: do not generate unneeded logo C filesMasahiro Yamada1-19/+2
Currently, all the logo C files are generated irrespective of the CONFIG options. Adding them to extra-y is wrong. What we need to do here is to add them to 'targets' so that if_changed works properly. Files listed in 'targets' are cleaned, so clean-files is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-05video/logo: remove unneeded *.o pattern from clean-filesMasahiro Yamada1-1/+1
The pattern *.o is cleaned up globally by the top Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-03Merge drm/drm-next into drm-misc-nextMaxime Ripard24-1711/+205
We haven't done any backmerge for a while due to the merge window, and it starts to become an issue for komeda. Let's bring 5.4-rc1 in. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-24Merge tag 'backlight-next-5.4' of ↵Linus Torvalds8-14/+84
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Core Frameworks - Obtain scale type through sysfs New Functionality: - Provide Device Tree functionality in rave-sp-backlight - Calculate if scale type is (non-)linear in pwm_bl Fix-ups: - Simplify code in lm3630a_bl - Trivial rename/whitespace/typo fixes in lms283gf05 - Remove superfluous NULL check in tosa_lcd - Fix power state initialisation in gpio_backlight - List supported file in MAINTAINERS Bug Fixes: - Kconfig - default to not building unless requested in {LED,BACKLIGHT}_CLASS_DEVICE" * tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Set scale type for brightness curves specified in the DT backlight: pwm_bl: Set scale type for CIE 1931 curves backlight: Expose brightness curve type through sysfs MAINTAINERS: Add entry for stable backlight sysfs ABI documentation backlight: gpio-backlight: Correct initial power state handling video: backlight: tosa_lcd: drop check because i2c_unregister_device() is NULL safe video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE} backlight: lms283gf05: Fix a typo in the description passed to 'devm_gpio_request_one()' backlight: lm3630a: Switch to use fwnode_property_count_uXX() backlight: rave-sp: Leave initial state and register with correct device
2019-09-22Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds3-700/+0
Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ...
2019-09-20video/hdmi: Fix AVI bar unpackVille Syrjälä1-4/+4
The bar values are little endian, not big endian. The pack function did it right but the unpack got it wrong. Fix it. Cc: stable@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Martin Bugge <marbugge@cisco.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Fixes: 2c676f378edb ("[media] hdmi: added unpack and logging functions for InfoFrames") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919132853.30954-1-ville.syrjala@linux.intel.com Reviewed-by: Thierry Reding <treding@nvidia.com>
2019-09-20Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds22-377/+128
Pull drm updates from Dave Airlie: "This is the main pull request for 5.4-rc1 merge window. I don't think there is anything outstanding so next week should just be fixes, but we'll see if I missed anything. I landed some fixes earlier in the week but got delayed writing summary and sending it out, due to a mix of sick kid and jetlag! There are some fixes pending, but I'd rather get the main merge out of the way instead of delaying it longer. It's also pretty large in commit count and new amd header file size. The largest thing is four new amdgpu products (navi12/14, arcturus and renoir APU support). Otherwise it's pretty much lots of work across the board, i915 has started landing tigerlake support, lots of icelake fixes and lots of locking reworking for future gpu support, lots of header file rework (drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been put into the places they are needed. uapi: - content protection type property for HDCP core: - rework include dependencies - lots of drmP.h removals - link rate calculation robustness fix - make fb helper map only when required - add connector->DDC adapter link - DRM_WAIT_ON removed - drop DRM_AUTH usage from drivers dma-buf: - reservation object fence helper dma-fence: - shrink dma_fence struct - merge signal functions - store timestamps in dma_fence - selftests ttm: - embed drm_get_object struct into ttm_buffer_object - release_notify callback bridges: - sii902x - audio graph card support - tc358767 - aux data handling rework - ti-snd64dsi86 - debugfs support, DSI mode flags support panels: - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe Himax8279d, Sharp LD-D5116Z01B - TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 i915: - Initial tigerlake platform support - Locking simplification work, general all over refactoring. - Selftests - HDCP debug info improvements - DSI properties - Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI suspend/resume - GuC fixes - Perf fixes - ElkhartLake enablement - DP MST fixes - GVT - command parser enhancements amdgpu: - add wipe memory on release flag for buffer creation - Navi12/14 support (may be marked experimental) - Arcturus support - Renoir APU support - mclk DPM for Navi - DC display fixes - Raven scatter/gather support - RAS support for GFX - Navi12 + Arcturus power features - GPU reset for Picasso - smu11 i2c controller support amdkfd: - navi12/14 support - Arcturus support radeon: - kexec fix nouveau: - improved display color management - detect lack of GPU power cables vmwgfx: - evicition priority support - remove unused security feature msm: - msm8998 display support - better async commit support for cursor updates etnaviv: - per-process address space support - performance counter fixes - softpin support mcde: - DCS transfers fix exynos: - drmP.h cleanup lima: - reduce logging kirin: - misc clenaups komeda: - dual-link support - DT memory regions hisilicon: - misc fixes imx: - IPUv3 image converter fixes - 32-bit RGB V4L2 pixel format support ingenic: - more support for panel related cases mgag200: - cursor support fix panfrost: - export GPU features register to userspace - gpu heap allocations - per-fd address space support pl111: - CLD pads wiring support removed from DT rockchip: - rework to use DRM PSR helpers - fix bug in VOP_WIN_GET macro - DSI DT binding rework sun4i: - improve support for color encoding and range - DDC enabled GPIO tinydrm: - rework SPI support - improve MIPI-DBI support - moved to drm/tiny vkms: - rework CRC tracking dw-hdmi: - get_eld and i2s improvements gm12u320: - misc fixes meson: - global code cleanup - vpu feature detect omap: - alpha/pixel blend mode properties rcar-du: - misc fixes" * tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits) drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init drm/nouveau: Fix ordering between TTM and GEM release drm/nouveau/prime: Extend DMA reservation object lock drm/nouveau: Fix fallout from reservation object rework drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap drm/i915: to make vgpu ppgtt notificaiton as atomic operation drm/i915: Flush the existing fence before GGTT read/write drm/i915: Hold irq-off for the entire fake lock period drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915 drm/i915/gvt: update vgpu workload head pointer correctly drm/mcde: Fix DSI transfers drm/msm: Use the correct dma_sync calls harder drm/msm: remove unlikely() from WARN_ON() conditions drm/msm/dsi: Fix return value check for clk_get_parent drm/msm: add atomic traces drm/msm/dpu: async commit support drm/msm: async commit support drm/msm: split power control from prepare/complete_commit drm/msm: add kms->flush_commit() ...
2019-09-18Merge tag 'driver-core-5.4-rc1' of ↵Linus Torvalds3-47/+26
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here is the big driver core update for 5.4-rc1. There was a bit of a churn in here, with a number of core and OF platform patches being added to the tree, and then after much discussion and review and a day-long in-person meeting, they were decided to be reverted and a new set of patches is currently being reviewed on the mailing list. Other than that churn, there are two "persistent" branches in here that other trees will be pulling in as well during the merge window. One branch to add support for drivers to have the driver core automatically add sysfs attribute files when a driver is bound to a device so that the driver doesn't have to manually do it (and then clean it up, as it always gets it wrong). There's another branch in here for generic lookup helpers for the driver core that lots of busses are starting to use. That's the majority of the non-driver-core changes in this patch series. There's also some on-going debugfs file creation cleanup that has been slowly happening over the past few releases, with the goal to hopefully get that done sometime next year. All of these have been in linux-next for a while now with no reported issues" [ Note that the above-mentioned generic lookup helpers branch was already brought in by the LED merge (commit 4feaab05dc1e) that had shared it. Also note that that common branch introduced an i2c bug due to a bad conversion, which got fixed here. - Linus ] * tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits) coccinelle: platform_get_irq: Fix parse error driver-core: add include guard to linux/container.h sysfs: add BIN_ATTR_WO() macro driver core: platform: Export platform_get_irq_optional() hwmon: pwm-fan: Use platform_get_irq_optional() driver core: platform: Introduce platform_get_irq_optional() Revert "driver core: Add support for linking devices during device addition" Revert "driver core: Add edit_links() callback for drivers" Revert "of/platform: Add functional dependency link from DT bindings" Revert "driver core: Add sync_state driver/bus callback" Revert "of/platform: Pause/resume sync state during init and of_platform_populate()" Revert "of/platform: Create device links for all child-supplier depencencies" Revert "of/platform: Don't create device links for default busses" Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()" Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning" Revert "of/platform: Disable generic device linking code for PowerPC" devcoredump: fix typo in comment devcoredump: use memory_read_from_buffer of/platform: Disable generic device linking code for PowerPC device.h: Fix warnings for mismatched parameter names in comments ...
2019-09-18Merge tag 'pm-5.4-rc1' of ↵Linus Torvalds4-50/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include a rework of the main suspend-to-idle code flow (related to the handling of spurious wakeups), a switch over of several users of cpufreq notifiers to QoS-based limits, a new devfreq driver for Tegra20, a new cpuidle driver and governor for virtualized guests, an extension of the wakeup sources framework to expose wakeup sources as device objects in sysfs, and more. Specifics: - Rework the main suspend-to-idle control flow to avoid repeating "noirq" device resume and suspend operations in case of spurious wakeups from the ACPI EC and decouple the ACPI EC wakeups support from the LPS0 _DSM support (Rafael Wysocki). - Extend the wakeup sources framework to expose wakeup sources as device objects in sysfs (Tri Vo, Stephen Boyd). - Expose system suspend statistics in sysfs (Kalesh Singh). - Introduce a new haltpoll cpuidle driver and a new matching governor for virtualized guests wanting to do guest-side polling in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell). - Fix the menu and teo cpuidle governors to allow the scheduler tick to be stopped if PM QoS is used to limit the CPU idle state exit latency in some cases (Rafael Wysocki). - Increase the resolution of the play_idle() argument to microseconds for more fine-grained injection of CPU idle cycles (Daniel Lezcano). - Switch over some users of cpuidle notifiers to the new QoS-based frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events (Viresh Kumar). - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li). - Add support for MT8183 and MT8516 to the mediatek cpufreq driver (Andrew-sh.Cheng, Fabien Parent). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang). - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz). - Update the qcom cpufreq driver (among other things, to make it easier to extend and to use kryo cpufreq for other nvmem-based SoCs) and add qcs404 support to it (Niklas Cassel, Douglas RAILLARD, Sibi Sankar, Sricharan R). - Fix assorted issues and make assorted minor improvements in the cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli, Gustavo Silva, Hariprasad Kelam). - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd Bergmann). - Add new Exynos PPMU events to devfreq events and extend that mechanism (Lukasz Luba). - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny). - Improve devfreq documentation and governor code, fix spelling typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez, MyungJoo Ham, Gaël PORTAY). - Add regulators enable and disable to the OPP (operating performance points) framework (Kamil Konieczny). - Update the OPP framework to support multiple opp-suspend properties (Anson Huang). - Fix assorted issues and make assorted minor improvements in the OPP code (Niklas Cassel, Viresh Kumar, Yue Hu). - Clean up the generic power domains (genpd) framework (Ulf Hansson). - Clean up assorted pieces of power management code and documentation (Akinobu Mita, Amit Kucheria, Chuhong Yuan). - Update the pm-graph tool to version 5.5 including multiple fixes and improvements (Todd Brandt). - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven, Sébastien Szymanski)" * tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits) cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available cpuidle-haltpoll: do not set an owner to allow modunload cpuidle-haltpoll: return -ENODEV on modinit failure cpuidle-haltpoll: set haltpoll as preferred governor cpuidle: allow governor switch on cpuidle_register_driver() PM: runtime: Documentation: add runtime_status ABI document pm-graph: make setVal unbuffered again for python2 and python3 powercap: idle_inject: Use higher resolution for idle injection cpuidle: play_idle: Increase the resolution to usec cpuidle-haltpoll: vcpu hotplug support cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state() PM / Domains: Simplify genpd_lookup_dev() ...
2019-09-17Merge branch 'pm-cpufreq'Rafael J. Wysocki4-50/+0
* pm-cpufreq: (36 commits) cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events sched/cpufreq: Align trace event behavior of fast switching ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier video: pxafb: Remove cpufreq policy notifier video: sa1100fb: Remove cpufreq policy notifier arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY cpufreq: powerpc_cbe: Switch to QoS requests for freq limits cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits cpufreq: Print driver name if cpufreq_suspend() fails cpufreq: mediatek: Add support for mt8183 cpufreq: mediatek: change to regulator_get_optional cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading ...
2019-09-17Merge tag 'armsoc-drivers' of ↵Linus Torvalds5-879/+65
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...
2019-09-17Merge tag 'm68k-for-v5.4-tag1' of ↵Linus Torvalds1-21/+21
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - ioremap() cleanups - defconfig updates - small fixes and cleanups * tag 'm68k-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Remove ioremap_fullcache() m68k: Simplify ioremap_nocache() m68k: defconfig: Update defconfigs for v5.3-rc2 m68k: atari: Rename shifter to shifter_st to avoid conflict m68k: Prevent some compiler warnings in Coldfire builds m68k: mac: Revisit floppy disc controller base addresses
2019-09-06fbdev/sa1100fb: Remove even more dead codeArnd Bergmann1-13/+0
This function lost its only call site as part of earlier dead code removal, so remove it as well: drivers/video/fbdev/sa1100fb.c:975:21: error: unused function 'sa1100fb_min_dma_period' [-Werror,-Wunused-function] Fixes: 390e5de11284 ("fbdev/sa1100fb: Remove dead code") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190906151307.1127187-1-arnd@arndb.de
2019-09-05Merge branch 'pm-cpufreq-qos'Rafael J. Wysocki4-50/+0
* pm-cpufreq-qos: Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier video: pxafb: Remove cpufreq policy notifier video: sa1100fb: Remove cpufreq policy notifier arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY cpufreq: powerpc_cbe: Switch to QoS requests for freq limits cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits thermal: cpu_cooling: Switch to QoS requests for freq limits cpufreq: Add policy create/remove notifiers back
2019-09-04fbdev: remove w90x900/nuc900 platform driversArnd Bergmann4-826/+0
The ARM w90x900 platform is getting removed, so this driver is obsolete. Link: https://lore.kernel.org/r/20190809202749.742267-10-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-02backlight: pwm_bl: Set scale type for brightness curves specified in the DTMatthias Kaehlcke1-0/+30
Check if a brightness curve specified in the device tree is linear or not and set the corresponding property accordingly. This makes the scale type available to userspace via the 'scale' sysfs attribute. To determine if a curve is linear it is compared to a interpolated linear curve between min and max brightness. The curve is considered linear if no value deviates more than +/-5% of ${brightness_range} from their interpolated value. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02backlight: pwm_bl: Set scale type for CIE 1931 curvesMatthias Kaehlcke1-1/+4
For backlight curves calculated with the CIE 1931 algorithm set the brightness scale type to non-linear. This makes the scale type available to userspace via the 'scale' sysfs attribute. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02backlight: Expose brightness curve type through sysfsMatthias Kaehlcke1-0/+19
Backlight brightness curves can have different shapes. The two main types are linear and non-linear curves. The human eye doesn't perceive linearly increasing/decreasing brightness as linear (see also 88ba95bedb79 "backlight: pwm_bl: Compute brightness of LED linearly to human eye"), hence many backlights use non-linear (often logarithmic) brightness curves. The type of curve currently is opaque to userspace, so userspace often uses more or less reliable heuristics (like the number of brightness levels) to decide whether to treat a backlight device as linear or non-linear. Export the type of the brightness curve via the new sysfs attribute 'scale'. The value of the attribute can be 'linear', 'non-linear' or 'unknown'. For devices that don't provide information about the scale of their brightness curve the value of the 'scale' attribute is 'unknown'. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02backlight: gpio-backlight: Correct initial power state handlingPeter Ujfalusi1-4/+20
The default-on property - or the def_value via legacy pdata) should be handled as: if it is 1, the backlight must be enabled (kept enabled) if it is 0, the backlight must be disabled (kept disabled) This only works for the case when default-on is set. If it is not set then the brightness of the backlight is set to 0. Now if the backlight is enabled by external driver (graphics) the backlight will stay disabled since the brightness is configured as 0. The backlight will not turn on. In order to minimize screen flickering during device boot: The initial brightness should be set to 1. If booted in non DT mode or no phandle link to the backlight node: follow the def_value/default-on to select UNBLANK or POWERDOWN If in DT boot we have phandle link then leave the GPIO in a state which the bootloader left it and let the user of the backlight to configure it further. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02video: backlight: tosa_lcd: drop check because i2c_unregister_device() is ↵Wolfram Sang1-2/+1
NULL safe No need to check the argument of i2c_unregister_device() because the function itself does it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE}Geert Uytterhoeven1-2/+0
When running "make oldconfig" on a .config where CONFIG_BACKLIGHT_LCD_SUPPORT is not set, two new config options ("Lowlevel LCD controls" and "Lowlevel Backlight controls") appear, both defaulting to "m". Drop the "default m", as options should default to disabled, and because several driver config options already select LCD_CLASS_DEVICE or BACKLIGHT_CLASS_DEVICE when needed. Fixes: 8c5dc8d9f19c7992 ("video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-26fbdev: da8xx: use resource management for dmaBartosz Golaszewski1-22/+10
Use managed variants of dma alloc functions in the da8xx fbdev driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-26fbdev: da8xx-fb: drop a redundant ifBartosz Golaszewski1-23/+20
The driver data is always set in probe. The remove() callback won't be called if probe failed which is the only way for it to be NULL. Remove the redundant if. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-26fbdev: da8xx-fb: use devm_platform_ioremap_resource()Bartosz Golaszewski1-3/+1
Shrink the code a bit by using the new helper wrapping the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-26fbdev: da8xx: remove panel_power_ctrl() callback from platform dataBartosz Golaszewski1-20/+5
There are no more users of panel_power_ctrl(). Remove it from the driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-26fbdev: da8xx: add support for a regulatorBartosz Golaszewski1-5/+49
We want to remove the hacky platform data callback for power control. Add a regulator to the driver data and enable/disable it next to the current panel_power_ctrl() calls. We will use it in subsequent patch on da850-evm. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-26video: pxafb: Remove cpufreq policy notifierViresh Kumar2-22/+0
The cpufreq policy notifier's CPUFREQ_ADJUST notification is going to get removed soon. The notifier callback pxafb_freq_policy() isn't doing anything apart from printing a debug message on CPUFREQ_ADJUST notification. There is no point in keeping an otherwise empty callback and registering the notifier. Remove it. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-26video: sa1100fb: Remove cpufreq policy notifierViresh Kumar2-28/+0
The cpufreq policy notifier's CPUFREQ_ADJUST notification is going to get removed soon. The notifier callback sa1100fb_freq_policy() isn't doing anything apart from printing a debug message on CPUFREQ_ADJUST notification. There is no point in keeping an otherwise empty callback and registering the notifier. Remove it. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-23fbdev: drop res_id parameter from remove_conflicting_pci_framebuffersGerd Hoffmann1-12/+5
Since commit b0e999c95581 ("fbdev: list all pci memory bars as conflicting apertures") the parameter was used for some sanity checks only, to make sure we detect any issues with the new approach to just list all memory bars as apertures. No issues turned up so far, so continue to cleanup: Drop the res_id parameter, drop the sanity checks. Also downgrade the logging from "info" level to "debug" level and update documentation. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20190822090645.25410-2-kraxel@redhat.com
2019-08-22Merge tag 'Wimplicit-fallthrough-5.3-rc6' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull more fallthrough fixes from Gustavo A. R. Silva: "Fix fall-through warnings on arm and mips for multiple configurations" * tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: video: fbdev: acornfb: Mark expected switch fall-through scsi: libsas: sas_discover: Mark expected switch fall-through MIPS: Octeon: Mark expected switch fall-through power: supply: ab8500_charger: Mark expected switch fall-through watchdog: wdt285: Mark expected switch fall-through mtd: sa1100: Mark expected switch fall-through drm/sun4i: tcon: Mark expected switch fall-through drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through ARM: riscpc: Mark expected switch fall-through dmaengine: fsldma: Mark expected switch fall-through
2019-08-21video: fbdev: acornfb: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: rpc_defconfig arm): drivers/video/fbdev/acornfb.c: In function ‘acornfb_parse_dram’: drivers/video/fbdev/acornfb.c:860:9: warning: this statement may fall through [-Wimplicit-fallthrough=] size *= 1024; ~~~~~^~~~~~~ drivers/video/fbdev/acornfb.c:861:3: note: here case 'K': ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-19udlfb: Make dlfb_ops constantNishka Dasgupta1-1/+1
Static structure dlfb_ops, of type fb_ops, is not used except to be copied into another variable. Hence make dlfb_ops constant to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Cc: Bernie Thompson <bernie@plugable.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190819075236.1051-1-nishkadg.linux@gmail.com
2019-08-19video: fbdev/mmp/core: Use struct_size() in kzalloc()Gustavo A. R. Silva1-4/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct mmp_path { ... struct mmp_overlay overlays[0]; }; size = sizeof(struct mmp_path) + count * sizeof(struct mmp_overlay); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, overlays, count), GFP_KERNEL) Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190807161312.GA26835@embeddedor
2019-08-19video: fbdev: viafb: Remove dead codeSouptick Joarder1-43/+0
This is dead code since 3.15. If there is no plan to use it further, this can be removed forever. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> [b.zolnierkie: fix patch summary] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1564515200-5020-1-git-send-email-jrdr.linux@gmail.com
2019-08-19video: fbdev: aty[128]fb: Remove dead codeSouptick Joarder2-47/+0
This is dead code since 3.15. If there is no plan to use it further, this can be removed forever. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: David S. Miller <davem@davemloft.net> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: "Ville Syrjälä" <syrjala@sci.fi> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [b.zolnierkie: fix patch summary] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1564514053-4571-1-git-send-email-jrdr.linux@gmail.com
2019-08-19video: fbdev: sh_mobile_lcdcfb: Mark expected switch fall-throughAnders Roxell1-0/+2
Now that -Wimplicit-fallthrough is passed to GCC by default, the following warnings shows up: ../drivers/video/fbdev/sh_mobile_lcdcfb.c: In function ‘sh_mobile_lcdc_channel_fb_init’: ../drivers/video/fbdev/sh_mobile_lcdcfb.c:2086:22: warning: this statement may fall through [-Wimplicit-fallthrough=] info->fix.ypanstep = 2; ~~~~~~~~~~~~~~~~~~~^~~ ../drivers/video/fbdev/sh_mobile_lcdcfb.c:2087:2: note: here case V4L2_PIX_FMT_NV16: ^~~~ ../drivers/video/fbdev/sh_mobile_lcdcfb.c: In function ‘sh_mobile_lcdc_overlay_fb_init’: ../drivers/video/fbdev/sh_mobile_lcdcfb.c:1596:22: warning: this statement may fall through [-Wimplicit-fallthrough=] info->fix.ypanstep = 2; ~~~~~~~~~~~~~~~~~~~^~~ ../drivers/video/fbdev/sh_mobile_lcdcfb.c:1597:2: note: here case V4L2_PIX_FMT_NV16: ^~~~ Rework to address a warnings due to the enablement of -Wimplicit-fallthrough. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Cc: Gustavo A. R. Silva <gustavo@embeddedor.com> [b.zolnierkie: fix patch summary] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190730152530.3055-1-anders.roxell@linaro.org
2019-08-19video: fbdev: radeonfb: Use dev_get_drvdataChuhong Yuan1-4/+2
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [b.zolnierkie: fix patch summary and intendation] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190724131900.2039-1-hslester96@gmail.com
2019-08-19video: fbdev: sm712fb: Use dev_get_drvdataChuhong Yuan1-6/+2
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> [b.zolnierkie: fix patch summary] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190724131744.1709-1-hslester96@gmail.com
2019-08-19video: fbdev: pvr2fb: remove unnecessary comparison of unsigned integer with < 0Gustavo A. R. Silva1-4/+2
There is no need to compare *var->xoffset* or *var->yoffset* with < 0 because such variables are of type unsigned, making it impossible to hold a negative value. Fix this by removing such comparisons. Addresses-Coverity-ID: 1451964 ("Unsigned compared against 0") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190722203358.GA29111@embeddedor
2019-08-19efifb: BGRT: Improve efifb_bgrt_sanity_checkHans de Goede1-21/+6
For various reasons, at least with x86 EFI firmwares, the xoffset and yoffset in the BGRT info are not always reliable. Extensive testing has shown that when the info is correct, the BGRT image is always exactly centered horizontally (the yoffset variable is more variable and not always predictable). This commit simplifies / improves the bgrt_sanity_check to simply check that the BGRT image is exactly centered horizontally and skips (re)drawing it when it is not. This fixes the BGRT image sometimes being drawn in the wrong place. Cc: stable@vger.kernel.org Fixes: 88fe4ceb2447 ("efifb: BGRT: Do not copy the boot graphics for non native resolutions") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: Peter Jones <pjones@redhat.com>, Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190721131918.10115-1-hdegoede@redhat.com
2019-08-19m68k: atari: Rename shifter to shifter_st to avoid conflictGeert Uytterhoeven1-21/+21
When test-compiling the BCM2835 pin control driver on m68k: In file included from arch/m68k/include/asm/io_mm.h:32:0, from arch/m68k/include/asm/io.h:8, from include/linux/io.h:13, from include/linux/irq.h:20, from include/linux/gpio/driver.h:7, from drivers/pinctrl/bcm/pinctrl-bcm2835.c:17: drivers/pinctrl/bcm/pinctrl-bcm2835.c: In function 'bcm2711_pull_config_set': arch/m68k/include/asm/atarihw.h:190:22: error: expected identifier or '(' before 'volatile' # define shifter ((*(volatile struct SHIFTER *)SHF_BAS)) "shifter" is a too generic name for a global definition. As the corresponding definition for Atari TT is already called "shifter_tt", fix this by renaming the definition for Atari ST to "shifter_st". Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-16video: omapfb2: Make standard and custom panel drivers mutually exclusiveLaurent Pinchart1-0/+5
Standard DRM panel drivers for several panels used by omapfb2 are now available. Their module name clashes with the modules from drivers/video/fbdev/omap2/omapfb/displays, part of the deprecated omapfb2 fbdev driver. As omapfb2 can only be compiled when the omapdrm driver is disabled, and the DRM panel drivers are useless in that case, make the omapfb2 panels depend on the standard DRM panels being disabled to fix the name clash. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: dc2e1e5b279966 ("drm/panel: Add driver for the Toppoly TD043MTEA1 panel") Fixes: 415b8dd0871188 ("drm/panel: Add driver for the Toppoly TD028TTEC1 panel") Fixes: 1c8fc3f0c5d280 ("drm/panel: Add driver for the Sony ACX565AKM panel") Fixes: c9cf4c2a3bd35f ("drm/panel: Add driver for the Sharp LS037V7DW01 panel") Fixes: df439abe650177 ("drm/panel: Add driver for the NEC NL8048HL11 panel") Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added tags] Link: https://patchwork.freedesktop.org/patch/msgid/20190816122228.9475-2-laurent.pinchart@ideasonboard.com
2019-08-12backlight: lms283gf05: Fix a typo in the description passed to ↵Christophe JAILLET1-1/+1
'devm_gpio_request_one()' The description passed to 'devm_gpio_request_one()' should be related to LMS283GF05, not LMS285GF05. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-12backlight: lm3630a: Switch to use fwnode_property_count_uXX()Andy Shevchenko1-2/+1
Use use fwnode_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-12backlight: rave-sp: Leave initial state and register with correct deviceLucas Stach1-2/+8
This way the backlight can be referenced through its device node and enabling/disabling can be managed through the panel driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-12Merge 5.3-rc4 into driver-core-nextGreg Kroah-Hartman1-0/+8
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-10video: fbdev: omapfb_main: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+8
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: omap1_defconfig arm): drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/watchdog/ar7_wdt.c:237:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:449:23: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1549:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1547:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1545:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1543:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1540:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1535:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-05backlight: drop EARLY_EVENT_BLANK supportSam Ravnborg2-19/+1
There was no users left - so drop the code to support EARLY_EVENT_BLANK. This patch removes the support in backlight, and drop the notifier in fbmem. That EARLY_EVENT_BLANK is not used can be verified that no driver set any of: lcd_ops.early_set_power() lcd_ops.r_early_set_power() Noticed while browsing backlight code for other reasons. v2: - Fix changelog to say "EARLY_EVENT_BLANK" (Daniel) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190725143224.GB31803@ravnborg.org
2019-08-02video: fbdev: sm501fb: convert platform driver to use dev_groupsGreg Kroah-Hartman1-28/+9
Platform drivers now have the option to have the platform core create and remove any needed sysfs attribute files. So take advantage of that and do not register "by hand" a bunch of sysfs files. Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20190731124349.4474-11-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 10:36:37 +0300