summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)AuthorFilesLines
2010-11-26fbdev: bfin_adv7393fb: new Blackfin ADV7393 driverMichael Hennerich4-0/+1206
Driver for ADV7393 add-on card for multiple Blackfin boards. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-26fbdev: bf537-lq035: new Blackfin Sharp LQ035 framebuffer driverMichael Hennerich3-0/+929
For LCDs hooked up to BF537-STAMP boards. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-19Merge branch 'common/fbdev-mipi' of ↵Paul Mundt11-41/+133
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
2010-11-19fbdev: sh_mipi_dsi: Allow LCDC board callbacksMagnus Damm1-0/+14
Update the MIPI-DSI driver to make use of the LCD panel callbacks in the LCDC platform data. Without this patch MIPI panels cannot use board specific LCDC callbacks to control power and/or back light. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-19fbdev: sh_mipi_dsi: Require two I/O resources V2Magnus Damm1-16/+39
This is V2 of the MIPI-DSI two resources patch. The second I/O resource specifies the base address for the link hardware block. The base address for the link hardware block seems to vary with SoC type. Using two I/O resources to describe the MIPI-DSI hardware allows us to support both newer and older SoCs. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-19fbdev: sh_mipi_dsi: Make use of register namesMagnus Damm1-23/+39
Keep MIPI-DSI registers in one place instead of using magic values together with comments. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-19fbdev: modedb: fix CEA modesArnd Hannemann1-5/+9
Some of the modes were missing the correct sync polarities. This was causing a corrupt or left shifted picture on my TV. Additionally format #35 had a wrong refresh rate and pixel clock. This patch fixes those issues. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann1-1/+0
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16Merge branches 'rmobile/fbdev' and 'common/fbdev-edid' of ↵Paul Mundt1-11/+49
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
2010-11-16Merge branch 'fbdev/edid'Paul Mundt2-0/+131
2010-11-16Merge branch 'i2c-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Sanity checks on adapter registration i2c: Mark i2c_adapter.id as deprecated i2c: Drivers shouldn't include <linux/i2c-id.h> i2c: Delete unused adapter IDs i2c: Remove obsolete cleanup for clientdata
2010-11-16i2c: Delete unused adapter IDsJean Delvare1-1/+0
Delete unused I2C adapter IDs. Special cases are: * I2C_HW_B_RIVA was still set in driver rivafb, however no other driver is ever looking for this value, so we can safely remove it. * I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no adapter ID is ever set to this value, so the code in question never runs. As the code additionally expects that I2C_HW_B_HDPVR may not be defined, we can delete it now and let the lirc_zilog driver maintainer rewrite this piece of code. Big thanks for Hans Verkuil for doing all the hard work :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
2010-11-15Merge branch 'fbdev-fixes-for-linus' of ↵Linus Torvalds4-16/+35
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: fsl-diu-fb: drop dead ioctl define MAINTAINERS: Add an fbdev git tree entry. OMAP: DSS: Fix documentation regarding 'vram' kernel parameter OMAP: VRAM: Fix boot-time memory allocation OMAP: VRAM: improve VRAM error prints sisfb: limit POST memory test according to PCI resource length fbdev: sh_mobile_lcdc: use correct number of modes, when using the default fbdev: sh_mobile_lcdc: use the standard CEA-861 720p timing fbdev: sh_mobile_hdmi: properly clean up modedb on monitor unplug
2010-11-15fbdev: sh_mobile_hdmi: add support for E-EDID parsingGuennadi Liakhovetski1-11/+49
Many HDMI clients implement enhanced EDID blocks, which often contain additional supported video modes. This patch implements parsing of such E-EDID blocks. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15Merge branch 'fbdev/edid' of ↵Paul Mundt2-0/+131
master.kernel.org:/pub/scm/linux/kernel/git/lethal/fbdev-2.6 into common/fbdev-edid
2010-11-15fbdev: when parsing E-EDID blocks, also use SVD entriesGuennadi Liakhovetski2-4/+76
Add parsing of E-EDID SVD entries. In this first version only a few CEA/EIA-861E modes are implemented, more can be added as needed. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15fbdev: export fb_edid_add_monspecs() for modules, improve algorithmGuennadi Liakhovetski1-28/+30
fb_edid_add_monspecs() should also be exported for use in modules, and it requires a dummy version for the case, when CONFIG_FB_MODE_HELPERS is not selected. This patch also improves the algorithm by removing a redundant memory allocation, adds function documentation, adds data verification and replaces memmove() with memcpy(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15video: add fb_edid_add_monspecs for parsing extended edid informationErik Gilling1-0/+57
Modern monitors/tvs have more extended EDID information blocks which can contain extra detailed modes. This adds a fb_edid_add_monspecs function which drivers can use to parse those additions blocks. Signed-off-by: Erik Gilling <konkers@android.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-12backlight: MacBookAir3,1(3,2) mbp-nvidia-bl supportEdgar (gimli) Hucek1-0/+18
Add support for the MacBookAir3,1 and MacBookAir3,2 to the mbp-nvidia-bl driver. Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/video/backlight/adp8860_bl.c: check strict_strtoul() return valueMichael Hennerich1-1/+3
Handle return value, strict_strtoul is declared with attribute warn_unused_result. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/video/backlight/adp8860_bl.c: fix ambient light zone overwrite handlingMichael Hennerich1-2/+2
This affects the get/set of the current Ambient Light Zone. Reading should return an integer between 1..3 (1 = Daylight, 2 = office, 3 = dark). Writing a value between 1..3 forces the backlight controller to enter the corresponding Ambient Light Zone. Writing 0 returns to normal operation. Fix valid range checking so we don't write invalid values to the controller, and make sure we subtract 1, since this is what the register definition (CFGR:BLV) requires. Otherwise the values written don't work correctly. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12backlight: add low threshold to pwm backlightArun Murthy1-1/+6
The intensity of the backlight can be varied from a range of max_brightness to zero. Though most, if not all the pwm based backlight devices start flickering at lower brightness value. And also for each device there exists a brightness value below which the backlight appears to be turned off though the value is not equal to zero. If the range of brightness for a device is from zero to max_brightness. A graph is plotted for brightness Vs intensity for the pwm based backlight device has to be a linear graph. intensity | / | / | / |/ --------- 0 max_brightness But pratically on measuring the above we note that the intensity of backlight goes to zero(OFF) when the value in not zero almost nearing to zero(some x%). so the graph looks like intensity | / | / | / | | ------------ 0 x max_brightness In order to overcome this drawback knowing this x% i.e nothing but the low threshold beyond which the backlight is off and will have no effect, the brightness value is being offset by the low threshold value(retaining the linearity of the graph). Now the graph becomes intensity | / | / | / | / ------------- 0 max_brightness With this for each and every digit increment in the brightness from zero there is a change in the intensity of backlight. Devices having this behaviour can set the low threshold brightness(lth_brightness) and pass the same as platform data else can have it as zero. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/video/backlight/s6e63m0.c: fix section mismatchAxel Lin1-1/+1
Eliminate section mismatch warning by marking s6e63m0_probe() as __devinit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Cc: InKi Dae <inki.dae@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/video/backlight/s6e63m0.c: unregister backlight device and remove ↵Axel Lin1-0/+3
sysfs attribute file in s6e63m0_remove s6e63m0_probe() registered backlight device and create sysfs attribute files, thus s6e63m0_remove() should unregister backlight device and remove sysfs attribute files. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Cc: InKi Dae <inki.dae@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12backlight: fix blanking for L4F00242T03 LCDMarek Vasut1-1/+1
The LCD was turned on if the variable power was > 0, but that was incorrect. The LCD has to be turned on in NORMAL and UNBLANK case. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12backlight: fix blanking for LMS283GF05 LCDMarek Vasut1-1/+1
The LCD was turned on if the variable power was > 0, but that was incorrect. The LCD has to be turned on in NORMAL and UNBLANK case. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/video/backlight/s6e63m0.c: set permissions on gamma_table file to 0444Axel Lin1-1/+1
gamma_table is not writable, so set permissions to 0444. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-10OMAP: VRAM: Fix boot-time memory allocationTomi Valkeinen1-1/+4
Use memblock_free() and memblock_remove() to remove the allocated or reserved VRAM area from normal kernel memory. This is a slightly modified version of patches from Felipe Contreras and Namhyung Kim. Reported-by: Felipe Contreras <felipe.contreras@gmail.com> Reported-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10OMAP: VRAM: improve VRAM error printsTomi Valkeinen1-3/+9
Improve the error prints to give more information about the offending address & size. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10sisfb: limit POST memory test according to PCI resource lengthAaro Koskinen1-2/+6
If the POST memory test fails, the driver may access illegal memory areas. Instead of hard coding the maximum size, set it according to the PCI resource length (an additional check is needed in sisfb_post_map_vram() to ensure it's big enough). DRAM sizing will later adjust video_size to the correct value. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10Merge branch 'common/fbdev' of ↵Paul Mundt2-86/+125
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
2010-11-10fbdev: sh_mobile_hdmi: fix up compiler warnings.Paul Mundt1-2/+0
CC drivers/video/sh_mobile_hdmi.o drivers/video/sh_mobile_hdmi.c: In function 'sh_hdmi_avi_infoframe_setup': drivers/video/sh_mobile_hdmi.c:539: warning: unused variable 'var' drivers/video/sh_mobile_hdmi.c: In function 'sh_hdmi_clk_configure': drivers/video/sh_mobile_hdmi.c:1021: warning: unused variable 'pdata' Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10fbdev: sh_mobile_lcdcfb: fix up compiler warnings.Paul Mundt1-1/+1
CC drivers/video/sh_mobile_lcdcfb.o drivers/video/sh_mobile_lcdcfb.c: In function 'sh_mobile_check_var': drivers/video/sh_mobile_lcdcfb.c:922: warning: format '%u' expects type 'unsigned int', but argument 11 has type 'long unsigned int' Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10fbdev: sh_mobile_hdmi: add support for 1080p modesGuennadi Liakhovetski1-21/+36
Add support for 3 more preprogrammed video modes: 1080p at 24, 50, and 60Hz. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10fbdev: sh_mobile_lcdc: increase maximum framebuffer size to support 1080pGuennadi Liakhovetski1-18/+8
LCDC hardware can support 1920x1080 formats, adjust the driver to cover them. Besides, instead of guessing some "reasonable" validity checks, only verify values in .fb_check_var(), that we are sure, we cannot support. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10fbdev: sh_mobile_hdmi: improve support for more video modesGuennadi Liakhovetski1-4/+10
Configure pre-programmed VIC modes for VGA (640x480@60) and 720x576@50 modes, change PHY mode selection to be based on pixel clock frequency. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10fbdev: sh_mobile_hdmi: add support for more precise HDMI clock configurationGuennadi Liakhovetski1-44/+68
The HDMI clock has to be reconfigured for different video modes. However, the precision of the supplying SoC clock on SH-Mobile systems is often insufficient. This patch allows to additionally reconfigure the parent clock to achieve the optimal HDMI clock frequency, in case this is supported by the platform. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10fbdev: sh_mobile_lcdc: use correct number of modes, when using the defaultGuennadi Liakhovetski1-6/+8
Fix zero mode number, when using the default 720p mode. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10fbdev: sh_mobile_lcdc: use the standard CEA-861 720p timingGuennadi Liakhovetski1-3/+4
sh_mobile_lcdcfb.c has a hard-coded 720p video mode, used as default, if none is explicitly specified by the platform. Adjust its timing to match the CEA standard. Also add an explicit refresh rate value, which is needed, when used with HDMI, to be able to recognise the default 720p mode as a pre-programmed VIC #4. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10fbdev: sh_mobile_hdmi: properly clean up modedb on monitor unplugGuennadi Liakhovetski1-1/+4
Even though this is not a problem currently, it is better to clear the freed pointer and nullify the length of the freed memory. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10Merge branch 'viafb-next' of git://github.com/schandinat/linux-2.6Paul Mundt4-23/+138
2010-11-09viafb: Add OLPC XO-1.5 port configsDaniel Drake1-0/+17
The OLPC XO-1.5 does not use the standard port wiring suggested in the viafb driver. This is required for the upcoming OLPC DCON and via-camera drivers, to be submitted soon. Signed-off-by: Daniel Drake <dsd@laptop.org> [fts: removed useless ifdef's and corrected comment] Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-11-09viafb: suspend/resume for GPIOsJonathan Corbet1-0/+29
Be sure to re-enable GPIO lines on resume. Users still have to be sure to set them properly. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-11-09viafb: General power management infrastructureDaniel Drake3-23/+92
Multiple devices need S/R hooks (framebuffer, GPIO, camera). Add infrastructure and convert existing framebuffer code to the new model. This patch should create no functional change. Based on earlier work by Jonathan Corbet. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-11-09ARM: Add support for the display controllers in VT8500 and WM8505Alexey Charkov8-0/+1205
This adds drivers for the LCD controller found in VIA VT8500 SoC, GOVR display controller found in WonderMedia WM8505 SoC and for the Graphics Engine present in both of them that provides hardware accelerated raster operations (used for copyarea and fillrect). Signed-off-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-30Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds4-359/+691
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (215 commits) ARM: memblock: setup lowmem mappings using memblock ARM: memblock: move meminfo into find_limits directly ARM: memblock: convert free_highpages() to use memblock ARM: move freeing of highmem pages out of mem_init() ARM: memblock: convert memory detail printing to use memblock ARM: memblock: use memblock to free memory into arm_bootmem_init() ARM: memblock: use memblock when initializing memory allocators ARM: ensure membank array is always sorted ARM: 6466/1: implement flush_icache_all for the rest of the CPUs ARM: 6464/2: fix spinlock recursion in adjust_pte() ARM: fix memblock breakage ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_type ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interrupt ARM: 6449/1: Fix for compiler warning of uninitialized variable. ARM: 6445/1: fixup TCM memory types ARM: imx: Add wake functionality to GPIO ARM: mx5: Add gpio-keys to mx51 babbage board ARM: imx: Add gpio-keys to plat-mxc mx31_3ds: Fix spi registration mx31_3ds: Fix the logic for detecting the debug board ...
2010-10-30Merge branches 'msm-fixes' and 'msm-video' of ↵Linus Torvalds2-4/+4
git://codeaurora.org/quic/kernel/dwalker/linux-msm * 'msm-fixes' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: msm: Kconfig: drop unused config options msm: fix compile failure when no debug uart is selected msm: fix debug-macro.S build failure msm: timer: Decrease shift on timer clocksource arm: mach-msm: fix error handling in msm_iommu_probe() msm: fix Kconfig target board selection msm: fix compile failure on struct membank node member * 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses drivers: msm: video: add dev_set_name call drivers: video: msm: fix hang on disable_irq
2010-10-29Merge branch 'stable/xen-pcifront-0.8.2' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
2010-10-28Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into ↵Russell King4-359/+691
devel-stable Conflicts: drivers/video/sh_mobile_hdmi.c
2010-10-28Merge branch 'v4l_for_linus' of ↵Linus Torvalds2-3/+15
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (505 commits) [media] af9015: Fix max I2C message size when used with tda18271 [media] IR: initialize ir_raw_event in few more drivers [media] Guard a divide in v4l1 compat layer [media] imon: fix nomouse modprobe option [media] imon: remove redundant change_protocol call [media] imon: fix my egregious brown paper bag w/rdev/idev split [media] cafe_ccic: Configure ov7670 correctly [media] ov7670: allow configuration of image size, clock speed, and I/O method [media] af9015: support for DigitalNow TinyTwin v3 [1f4d:9016] [media] af9015: map DigitalNow TinyTwin v2 remote [media] DigitalNow TinyTwin remote controller [media] af9015: RC fixes and improvements videodev2.h.xml: Update to reflect the latest changes at videodev2.h [media] v4l: document new Bayer and monochrome pixel formats [media] DocBook/v4l: Add missing formats used on gspca cpia1 and sn9c2028 [media] firedtv: add parameter to fake ca_system_ids in CA_INFO [media] tm6000: fix a macro coding style issue tm6000: Remove some ugly debug code [media] Nova-S-Plus audio line input [media] [RFC,1/1] V4L2: Use new CAP bits in existing RDS capable drivers ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-23 17:17:27 +0300