| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 35fa2b4bf96415b88d7edaa5cf8af5185d9ce76e upstream.
403ae52ac047 ("sparc: fix drivers/video/tcx.c warning") changed the
physbase initializing breaking the user-space mmap, e.g. for Xorg
entirely.
Fix fbdev mmap table so the sbus mmap helper work correctly, and
not try to map vastly (physbase) offset memory.
Fixes: 403ae52ac047 ("sparc: fix drivers/video/tcx.c warning")
Cc: <stable@vger.kernel.org>
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0155e868cbc111846cc2809c1546ea53810a56ae upstream.
The variables were never clamped because the return value of clamp_val()
was not used. Fix this by assigning the clamped values, and use clamp()
instead of clamp_val().
Cc: stable@vger.kernel.org
Fixes: 3f16ff608a75 ("[ARM] pxafb: cleanup of the timing checking code")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e3f44742bbb10537fe53d83d20dea2a7c167674d upstream.
While debuggigng why X would not start on mips64 Sgi/O2 I found the
phys adress being off. Turns out the gbefb passed the internal
dma_addr as phys. May be broken pre git history. Fix by converting
dma_to_phys.
Signed-off-by: René Rebe <rene@exactco.de>
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 164312662ae9764b83b84d97afb25c42eb2be473 ]
The page allocated for vmem using __get_free_pages() is not freed on the
error paths after it. Fix that by adding a corresponding __free_pages()
call to the error path.
Fixes: facd94bc458a ("fbdev: ssd1307fb: Allocate page aligned video memory.")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9341d6698f4cfdfc374fb6944158d111ebe16a9d ]
LED Backlight is a consumer of one or multiple LED class devices, but
devlink is currently unable to create correct supplier-producer links when
the supplier is a class device. It creates instead a link where the
supplier is the parent of the expected device.
One consequence is that removal order is not correctly enforced.
Issues happen for example with the following sections in a device tree
overlay:
// An LED driver chip
pca9632@62 {
compatible = "nxp,pca9632";
reg = <0x62>;
// ...
addon_led_pwm: led-pwm@3 {
reg = <3>;
label = "addon:led:pwm";
};
};
backlight-addon {
compatible = "led-backlight";
leds = <&addon_led_pwm>;
brightness-levels = <255>;
default-brightness-level = <255>;
};
In this example, the devlink should be created between the backlight-addon
(consumer) and the pca9632@62 (supplier). Instead it is created between the
backlight-addon (consumer) and the parent of the pca9632@62, which is
typically the I2C bus adapter.
On removal of the above overlay, the LED driver can be removed before the
backlight device, resulting in:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
Call trace:
led_put+0xe0/0x140
devm_led_release+0x6c/0x98
Another way to reproduce the bug without any device tree overlays is
unbinding the LED class device (pca9632@62) before unbinding the consumer
(backlight-addon):
echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind
echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind
Fix by adding a devlink between the consuming led-backlight device and the
supplying LED device, as other drivers and subsystems do as well.
Fixes: ae232e45acf9 ("backlight: add led-backlight driver")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20250519-led-backlight-add-devlink-to-supplier-class-device-v6-1-845224aeb2ce@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a33677b9211b6c328ad359b072043af94f7c9592 ]
The led_access lock must be held when calling led_sysfs_enable() and
led_sysfs_disable(). This fixes warnings such as this:
[ 2.432495] ------------[ cut here ]------------
[ 2.437316] WARNING: CPU: 0 PID: 22 at drivers/leds/led-core.c:349 led_sysfs_disable+0x54/0x58
[ 2.446105] Modules linked in:
[ 2.449218] CPU: 0 PID: 22 Comm: kworker/u2:1 Not tainted 6.3.8+ #1
[ 2.456268] Hardware name: Generic AM3517 (Flattened Device Tree)
[ 2.462402] Workqueue: events_unbound deferred_probe_work_func
[ 2.468353] unwind_backtrace from show_stack+0x10/0x14
[ 2.473632] show_stack from dump_stack_lvl+0x24/0x2c
[ 2.478759] dump_stack_lvl from __warn+0x9c/0xc4
[ 2.483551] __warn from warn_slowpath_fmt+0x64/0xc0
[ 2.488586] warn_slowpath_fmt from led_sysfs_disable+0x54/0x58
[ 2.494567] led_sysfs_disable from led_bl_probe+0x20c/0x3b0
[ 2.500305] led_bl_probe from platform_probe+0x5c/0xb8
[ 2.505615] platform_probe from really_probe+0xc8/0x2a0
[ 2.510986] really_probe from __driver_probe_device+0x88/0x19c
[ 2.516967] __driver_probe_device from driver_probe_device+0x30/0xcc
[ 2.523498] driver_probe_device from __device_attach_driver+0x94/0xc4
[ 2.530090] __device_attach_driver from bus_for_each_drv+0x80/0xcc
[ 2.536437] bus_for_each_drv from __device_attach+0xf8/0x19c
[ 2.542236] __device_attach from bus_probe_device+0x8c/0x90
[ 2.547973] bus_probe_device from deferred_probe_work_func+0x80/0xb0
[ 2.554504] deferred_probe_work_func from process_one_work+0x228/0x4c0
[ 2.561187] process_one_work from worker_thread+0x1fc/0x4d0
[ 2.566925] worker_thread from kthread+0xb4/0xd0
[ 2.571685] kthread from ret_from_fork+0x14/0x2c
[ 2.576446] Exception stack(0xd0079fb0 to 0xd0079ff8)
[ 2.581573] 9fa0: 00000000 00000000 00000000 00000000
[ 2.589813] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2.598052] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 2.604888] ---[ end trace 0000000000000000 ]---
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230619160249.10414-1-mans@mansr.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 9341d6698f4c ("backlight: led-bl: Add devlink to supplier LEDs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3637d34b35b287ab830e66048841ace404382b67 ]
Add bounds checking to prevent writes past framebuffer boundaries when
rendering text near screen edges. Return early if the Y position is off-screen
and clip image height to screen boundary. Break from the rendering loop if the
X position is off-screen. When clipping image width to fit the screen, update
the character count to match the clipped width to prevent buffer size
mismatches.
Without the character count update, bit_putcs_aligned and bit_putcs_unaligned
receive mismatched parameters where the buffer is allocated for the clipped
width but cnt reflects the original larger count, causing out-of-bounds writes.
Reported-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48b0652a95834717f190
Suggested-by: Helge Deller <deller@gmx.de>
Tested-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07c7efda24453e05951fb2879f5452b720b91169 ]
According to LP8556 datasheet EPROM region starts at 0x98 so adjust value
in the driver accordingly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250909074304.92135-2-clamor95@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit eb53368f8d6e2dfba84c8a94d245719bcf9ae270 upstream.
The of_find_node_by_name() function returns a device tree node with its
reference count incremented. The caller is responsible for calling
of_node_put() to release this reference when done.
Found via static analysis.
Fixes: cc5d0189b9ba ("[PATCH] powerpc: Remove device_node addrs/n_addr")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5f566c0ac51cd2474e47da68dbe719d3acf7d999 upstream.
Commit e24cca19babe ("sh: Kill off MAX_DMA_ADDRESS leftovers.") removed
the define ONCHIP_NR_DMA_CHANNELS. So that the leftover reference needs
to be replaced by CONFIG_NR_ONCHIP_DMA_CHANNELS to compile successfully
with CONFIG_PVR2_DMA enabled.
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 18c4ef4e765a798b47980555ed665d78b71aeadf upstream.
bit_putcs_aligned()/unaligned() derived the glyph pointer from the
character value masked by 0xff/0x1ff, which may exceed the actual font's
glyph count and read past the end of the built-in font array.
Clamp the index to the actual glyph count before computing the address.
This fixes a global out-of-bounds read reported by syzbot.
Reported-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=793cf822d213be1a74f2
Tested-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7073c7fc8d8ba47194e5fc58fcafc0efe7586e9b upstream.
Actually check the return value from pll_ops->init_pll()
as it can return an error.
If the card's BIOS didn't run because it's not the primary VGA card
the fact that the xclk source is unsupported is printed as shown
below but the driver continues on regardless and on my machine causes
a hard lock up.
[ 61.470088] atyfb 0000:03:05.0: enabling device (0080 -> 0083)
[ 61.476191] atyfb: using auxiliary register aperture
[ 61.481239] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27]
[ 61.487569] atyfb: 512K SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK
[ 61.496112] atyfb: Unsupported xclk source: 5.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b2f5ef00e852f8e8902a4d4f73aeedc60220c12 upstream.
Commit 1a194e6c8e1e ("fbcon: fix integer overflow in fbcon_do_set_font")
introduced an out-of-bounds access by storing data and allocation sizes
in the same variable. Restore the old size calculation and use the new
variable 'alloc_size' for the allocation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 1a194e6c8e1e ("fbcon: fix integer overflow in fbcon_do_set_font")
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15020
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6201
Cc: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Qianqiang Liu <qianqiang.liu@163.com>
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org> # v5.9+
Cc: Zsolt Kajtar <soci@c64.rulez.org>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Qianqiang Liu <qianqiang.liu@163.com>
Link: https://lore.kernel.org/r/20250922134619.257684-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a194e6c8e1ee745e914b0b7f50fa86c89ed13fe upstream.
Fix integer overflow vulnerabilities in fbcon_do_set_font() where font
size calculations could overflow when handling user-controlled font
parameters.
The vulnerabilities occur when:
1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount
multiplication with user-controlled values that can overflow.
2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow
3. This results in smaller allocations than expected, leading to buffer
overflows during font data copying.
Add explicit overflow checking using check_mul_overflow() and
check_add_overflow() kernel helpers to safety validate all size
calculations before allocation.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 39b3cffb8cf3 ("fbcon: prevent user font height or width change from causing potential out-of-bounds access")
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: stable <stable@vger.kernel.org>
Cc: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Qianqiang Liu <qianqiang.liu@163.com>
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250912170023.3931881-1-samasth.norway.ananda@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 13d28e0c79cbf69fc6f145767af66905586c1249.
Commit ee7a69aa38d8 ("fbdev: Disable sysfb device registration when
removing conflicting FBs") was backported to 5.15.y LTS. This causes a
regression where all virtual consoles stop responding during boot at:
"Populating /dev with existing devices through uevents ..."
Reverting the commit fixes the regression.
Signed-off-by: Brett A C Sheffield <bacs@librecast.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e4fc307d8e24f122402907ebf585248cad52841d upstream.
This reverts commit 864f9963ec6b4b76d104d595ba28110b87158003.
The patch is wrong as it checks vc_origin against vc_screenbuf,
while in text mode it should compare against vga_vram_base.
As such it broke VGA text scrolling, which can be reproduced like this:
(1) boot a kernel that is configured to use text mode VGA-console
(2) type commands: ls -l /usr/bin | less -S
(3) scroll up/down with cursor-down/up keys
Reported-by: Jari Ruusu <jariruusu@protonmail.com>
Cc: stable@vger.kernel.org
Cc: Yi Yang <yiyang13@huawei.com>
Cc: GONG Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit af0db3c1f898144846d4c172531a199bb3ca375d upstream.
This issue triggers when a userspace program does an ioctl
FBIOPUT_CON2FBMAP by passing console number and frame buffer number.
Ideally this maps console to frame buffer and updates the screen if
console is visible.
As part of mapping it has to do resize of console according to frame
buffer info. if this resize fails and returns from vc_do_resize() and
continues further. At this point console and new frame buffer are mapped
and sets display vars. Despite failure still it continue to proceed
updating the screen at later stages where vc_data is related to previous
frame buffer and frame buffer info and display vars are mapped to new
frame buffer and eventully leading to out-of-bounds write in
fast_imageblit(). This bheviour is excepted only when fg_console is
equal to requested console which is a visible console and updates screen
with invalid struct references in fbcon_putcs().
Reported-and-tested-by: syzbot+c4b7aa0513823e2ea880@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c4b7aa0513823e2ea880
Signed-off-by: Sravan Kumar Gundu <sravankumarlpu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit da11e6a30e0bb8e911288bdc443b3dc8f6a7cac7 ]
fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot
allocate a struct fb_modelist. If that happens, the modelist stays empty but
the driver continues to register. Add a check for its return value to prevent
poteintial null-ptr-deref, which is similar to the commit 17186f1f90d3 ("fbdev:
Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var").
Fixes: 1b6c79361ba5 ("video: imxfb: Add DT support")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03bcbbb3995ba5df43af9aba45334e35f2dfe27b ]
Signal vt subsystem to redraw console when switching to dummycon
with deferred takeover enabled. Makes the console switch to fbcon
and displays the available output.
With deferred takeover enabled, dummycon acts as the placeholder
until the first output to the console happens. At that point, fbcon
takes over. If the output happens while dummycon is not active, it
cannot inform fbcon. This is the case if the vt subsystem runs in
graphics mode.
A typical graphical boot starts plymouth, a display manager and a
compositor; all while leaving out dummycon. Switching to a text-mode
console leaves the console with dummycon even if a getty terminal
has been started.
Returning true from dummycon's con_switch helper signals the vt
subsystem to redraw the screen. If there's output available dummycon's
con_putc{s} helpers trigger deferred takeover of fbcon, which sets a
display mode and displays the output. If no output is available,
dummycon remains active.
v2:
- make the comment slightly more verbose (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Andrei Borzenkov <arvidjaar@gmail.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1242191
Tested-by: Andrei Borzenkov <arvidjaar@gmail.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: 83d83bebf401 ("console/fbcon: Add support for deferred console takeover")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.19+
Link: https://lore.kernel.org/r/20250520071418.8462-1-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d5cc8eed738e3202379722295c626cba0849785 ]
The non-zero (true) return value from consw::con_switch() means a redraw
is needed. So make this return type a bool explicitly instead of int.
The latter might imply that -Eerrors are expected. They are not.
And document the hook.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-parisc@vger.kernel.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-31-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 559f01a0ee6d924c6fec3eaf6a5b078b15e71070 ]
In consw::con_clear():
* Height is always 1, so drop it.
* Offsets and width are always unsigned values, so re-type them as such.
This needs a new __fbcon_clear() in the fbcon code to still handle
height which might not be 1 when called internally.
Note that tests for negative count/width are left in place -- they are
taken care of in the next patches.
And document the hook.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-parisc@vger.kernel.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-22-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dae3e6b6180f1a2394b984c596d39ed2c57d25fe ]
The 'init' parameter of consw::con_init() is true for the first call of
the hook on a particular console. So make the parameter a bool.
And document the hook.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-parisc@vger.kernel.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-21-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ceed69cde8fe4a78fe50d62d7a88a5c1eed4709 ]
Most of the forward declarations in vgacon are not needed. Drop them.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03b89a08484a88fb9e0604cab2b3eb0c2f265c74 ]
Switch vgacon_scrolldelta() and vgacon_restore_screen() positions, so
that the former is not needed to be forward-declared.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4173f018aae16b6496d292c234b858241f85254f ]
struct uni_pagedir contains 32 unicode page directories, so the name of
the structure is a bit misleading. Rename the structure to uni_pagedict,
so it looks like this:
struct uni_pagedict
-> 32 page dirs
-> 32 rows
-> 64 glyphs
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ad7acdad1d91545b99bf9fda3de4b86cf48b272 ]
I didn't bother with any code movement to fix the others, these just
got a bit in the way.
v2: Rebase on top of Helge's reverts.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org> (v1)
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-2-daniel.vetter@ffwll.ch
Stable-dep-of: 03bcbbb3995b ("dummycon: Trigger redraw when switching consoles with deferred takeover")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 864f9963ec6b4b76d104d595ba28110b87158003 upstream.
Our in-house Syzkaller reported the following BUG (twice), which we
believed was the same issue with [1]:
==================================================================
BUG: KASAN: slab-out-of-bounds in vcs_scr_readw+0xc2/0xd0 drivers/tty/vt/vt.c:4740
Read of size 2 at addr ffff88800f5bef60 by task syz.7.2620/12393
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x72/0xa0 lib/dump_stack.c:106
print_address_description.constprop.0+0x6b/0x3d0 mm/kasan/report.c:364
print_report+0xba/0x280 mm/kasan/report.c:475
kasan_report+0xa9/0xe0 mm/kasan/report.c:588
vcs_scr_readw+0xc2/0xd0 drivers/tty/vt/vt.c:4740
vcs_write_buf_noattr drivers/tty/vt/vc_screen.c:493 [inline]
vcs_write+0x586/0x840 drivers/tty/vt/vc_screen.c:690
vfs_write+0x219/0x960 fs/read_write.c:584
ksys_write+0x12e/0x260 fs/read_write.c:639
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x59/0x110 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x78/0xe2
...
</TASK>
Allocated by task 5614:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:374 [inline]
__kasan_kmalloc+0x8f/0xa0 mm/kasan/common.c:383
kasan_kmalloc include/linux/kasan.h:201 [inline]
__do_kmalloc_node mm/slab_common.c:1007 [inline]
__kmalloc+0x62/0x140 mm/slab_common.c:1020
kmalloc include/linux/slab.h:604 [inline]
kzalloc include/linux/slab.h:721 [inline]
vc_do_resize+0x235/0xf40 drivers/tty/vt/vt.c:1193
vgacon_adjust_height+0x2d4/0x350 drivers/video/console/vgacon.c:1007
vgacon_font_set+0x1f7/0x240 drivers/video/console/vgacon.c:1031
con_font_set drivers/tty/vt/vt.c:4628 [inline]
con_font_op+0x4da/0xa20 drivers/tty/vt/vt.c:4675
vt_k_ioctl+0xa10/0xb30 drivers/tty/vt/vt_ioctl.c:474
vt_ioctl+0x14c/0x1870 drivers/tty/vt/vt_ioctl.c:752
tty_ioctl+0x655/0x1510 drivers/tty/tty_io.c:2779
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl+0x12d/0x190 fs/ioctl.c:857
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x59/0x110 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x78/0xe2
Last potentially related work creation:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
__kasan_record_aux_stack+0x94/0xa0 mm/kasan/generic.c:492
__call_rcu_common.constprop.0+0xc3/0xa10 kernel/rcu/tree.c:2713
netlink_release+0x620/0xc20 net/netlink/af_netlink.c:802
__sock_release+0xb5/0x270 net/socket.c:663
sock_close+0x1e/0x30 net/socket.c:1425
__fput+0x408/0xab0 fs/file_table.c:384
__fput_sync+0x4c/0x60 fs/file_table.c:465
__do_sys_close fs/open.c:1580 [inline]
__se_sys_close+0x68/0xd0 fs/open.c:1565
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x59/0x110 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x78/0xe2
Second to last potentially related work creation:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
__kasan_record_aux_stack+0x94/0xa0 mm/kasan/generic.c:492
__call_rcu_common.constprop.0+0xc3/0xa10 kernel/rcu/tree.c:2713
netlink_release+0x620/0xc20 net/netlink/af_netlink.c:802
__sock_release+0xb5/0x270 net/socket.c:663
sock_close+0x1e/0x30 net/socket.c:1425
__fput+0x408/0xab0 fs/file_table.c:384
task_work_run+0x154/0x240 kernel/task_work.c:239
exit_task_work include/linux/task_work.h:45 [inline]
do_exit+0x8e5/0x1320 kernel/exit.c:874
do_group_exit+0xcd/0x280 kernel/exit.c:1023
get_signal+0x1675/0x1850 kernel/signal.c:2905
arch_do_signal_or_restart+0x80/0x3b0 arch/x86/kernel/signal.c:310
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x1b3/0x1e0 kernel/entry/common.c:218
do_syscall_64+0x66/0x110 arch/x86/entry/common.c:87
entry_SYSCALL_64_after_hwframe+0x78/0xe2
The buggy address belongs to the object at ffff88800f5be000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 2656 bytes to the right of
allocated 1280-byte region [ffff88800f5be000, ffff88800f5be500)
...
Memory state around the buggy address:
ffff88800f5bee00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800f5bee80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88800f5bef00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88800f5bef80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800f5bf000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
By analyzing the vmcore, we found that vc->vc_origin was somehow placed
one line prior to vc->vc_screenbuf when vc was in KD_TEXT mode, and
further writings to /dev/vcs caused out-of-bounds reads (and writes
right after) in vcs_write_buf_noattr().
Our further experiments show that in most cases, vc->vc_origin equals to
vga_vram_base when the console is in KD_TEXT mode, and it's around
vc->vc_screenbuf for the KD_GRAPHICS mode. But via triggerring a
TIOCL_SETVESABLANK ioctl beforehand, we can make vc->vc_origin be around
vc->vc_screenbuf while the console is in KD_TEXT mode, and then by
writing the special 'ESC M' control sequence to the tty certain times
(depends on the value of `vc->state.y - vc->vc_top`), we can eventually
move vc->vc_origin prior to vc->vc_screenbuf. Here's the PoC, tested on
QEMU:
```
int main() {
const int RI_NUM = 10; // should be greater than `vc->state.y - vc->vc_top`
int tty_fd, vcs_fd;
const char *tty_path = "/dev/tty0";
const char *vcs_path = "/dev/vcs";
const char escape_seq[] = "\x1bM"; // ESC + M
const char trigger_seq[] = "Let's trigger an OOB write.";
struct vt_sizes vt_size = { 70, 2 };
int blank = TIOCL_BLANKSCREEN;
tty_fd = open(tty_path, O_RDWR);
char vesa_mode[] = { TIOCL_SETVESABLANK, 1 };
ioctl(tty_fd, TIOCLINUX, vesa_mode);
ioctl(tty_fd, TIOCLINUX, &blank);
ioctl(tty_fd, VT_RESIZE, &vt_size);
for (int i = 0; i < RI_NUM; ++i)
write(tty_fd, escape_seq, sizeof(escape_seq) - 1);
vcs_fd = open(vcs_path, O_RDWR);
write(vcs_fd, trigger_seq, sizeof(trigger_seq));
close(vcs_fd);
close(tty_fd);
return 0;
}
```
To solve this problem, add an address range validation check in
vgacon_scroll(), ensuring vc->vc_origin never precedes vc_screenbuf.
Reported-by: syzbot+9c09fda97a1a65ea859b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9c09fda97a1a65ea859b [1]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Co-developed-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 05f6e183879d9785a3cdf2f08a498bc31b7a20aa upstream.
If fb_add_videomode() in fb_set_var() fails to allocate memory for
fb_videomode, later it may lead to a null-ptr dereference in
fb_videomode_to_var(), as the fb_info is registered while not having the
mode in modelist that is expected to be there, i.e. the one that is
described in fb_info->var.
================================================================
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901
Call Trace:
display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929
fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071
resize_screen drivers/tty/vt/vt.c:1176 [inline]
vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263
fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720
fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776
do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128
fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
================================================================
The reason is that fb_info->var is being modified in fb_set_var(), and
then fb_videomode_to_var() is called. If it fails to add the mode to
fb_info->modelist, fb_set_var() returns error, but does not restore the
old value of fb_info->var. Restore fb_info->var on failure the same way
it is done earlier in the function.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e12d3e1624a02706cdd3628bbf5668827214fa33 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
wled_configure() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: f86b77583d88 ("backlight: pm8941: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250401091647.22784-1-bsdhenrymartin@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3f6dae09fc8c306eb70fdfef70726e1f154e173a ]
In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000,
cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's
then passed to fb_cvt_hperiod(), where it's used as a divider -- division
by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to
avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 96fe6a2109db ("[PATCH] fbdev: Add VESA Coordinated Video Timings (CVT) support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 76d3ca89981354e1f85a3e0ad9ac4217d351cc72 ]
I was wondering why there's garbage at the bottom of the screen when
tile blitting is used with an odd mode like 1080, 600 or 200. Sure there's
only space for half a tile but the same area is clean when the buffer
is bitmap.
Then later I found that it's supposed to be cleaned but that's not
implemented. So I took what's in bitblit and adapted it for tileblit.
This implementation was tested for both the horizontal and vertical case,
and now does the same as what's done for bitmap buffers.
If anyone is interested to reproduce the problem then I could bet that'd
be on a S3 or Ark. Just set up a mode with an odd line count and make
sure that the virtual size covers the complete tile at the bottom. E.g.
for 600 lines that's 608 virtual lines for a 16 tall tile. Then the
bottom area should be cleaned.
For the right side it's more difficult as there the drivers won't let an
odd size happen, unless the code is modified. But once it reports back a
few pixel columns short then fbcon won't use the last column. With the
patch that column is now clean.
Btw. the virtual size should be rounded up by the driver for both axes
(not only the horizontal) so that it's dividable by the tile size.
That's a driver bug but correcting it is not in scope for this patch.
Implement missing margin clearing for tileblit
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 892c788d73fe4a94337ed092cb998c49fa8ecaf4 ]
The erase colour calculation for fbcon clearing should use get_color instead
of attr_col_ec, like everything else. The latter is similar but is not correct.
For example it's missing the depth dependent remapping and doesn't care about
blanking.
The problem can be reproduced by setting up the background colour to grey
(vt.color=0x70) and having an fbcon console set to 2bpp (4 shades of gray).
Now the background attribute should be 1 (dark gray) on the console.
If the screen is scrolled when pressing enter in a shell prompt at the bottom
line then the new line is cleared using colour 7 instead of 1. That's not
something fillrect likes (at 2bbp it expect 0-3) so the result is interesting.
This patch switches to get_color with vc_video_erase_char to determine the
erase colour from attr_col_ec. That makes the latter function redundant as
no other users were left.
Use correct erase colour for clearing in fbcon
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 86d16cd12efa547ed43d16ba7a782c1251c80ea8 ]
Call device_remove_file() when driver remove.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 276822a00db3c1061382b41e72cafc09d6a0ec30 ]
Lockdep detects the following issue on led-backlight removal:
[ 142.315935] ------------[ cut here ]------------
[ 142.315954] WARNING: CPU: 2 PID: 292 at drivers/leds/led-core.c:455 led_sysfs_enable+0x54/0x80
...
[ 142.500725] Call trace:
[ 142.503176] led_sysfs_enable+0x54/0x80 (P)
[ 142.507370] led_bl_remove+0x80/0xa8 [led_bl]
[ 142.511742] platform_remove+0x30/0x58
[ 142.515501] device_remove+0x54/0x90
...
Indeed, led_sysfs_enable() has to be called with the led_access
lock held.
Hold the lock when calling led_sysfs_disable().
Fixes: ae232e45acf9 ("backlight: add led-backlight driver")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20250122091914.309533-1-herve.codina@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4c4fa57fd3cc00020152baa169337521f90b2ad ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308073945.2336302-7-u.kleine-koenig@pengutronix.de
Stable-dep-of: 276822a00db3 ("backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3e411827f31db7f938a30a3c7a7599839401ec30 ]
Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB
of the enum parameter plane.
The value of this parameter is initialized in dss_init_overlays and in the
current state of the code it cannot take this value so it's not a real
problem.
For the purposes of defensive coding it wouldn't be superfluous to check
the parameter value, because some functions down the call stack process
this value correctly and some not.
For example, in dispc_ovl_setup_global_alpha it may lead to buffer
overflow.
Add check for this value.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aee50bd88ea5fde1ff4cc021385598f81a65830c ]
Added checks for xoffset, yoffset settings.
Incorrect settings of these parameters can lead to errors
in sm501fb_pan_ functions.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5fc404e47bdf ("[PATCH] fb: SM501 framebuffer driver")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5bbcc7645f4b244ffb5ac6563fbe9d3d42194447 ]
mdacon has roughly the same dependencies as vgacon but expresses them
as a negative list instead of a positive list, with the only practical
difference being PowerPC/CHRP, which uses vga16fb instead of vgacon.
The CONFIG_MDA_CONSOLE description advises to only turn it on when vgacon
is also used because MDA/Hercules-only systems should be using vgacon
instead, so just change the list to enforce that directly for simplicity.
The probing was broken from 2002 to 2008, this improves on the fix
that was added then: If vgacon is a loadable module, then mdacon
cannot be built-in now, and the list of systems that support vgacon
is carried over.
Fixes: 0b9cf3aa6b1e ("mdacon messing up default vc's - set default to vc13-16 again")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2df2c0caaecfd869b49e14f2b8df822397c5dd7f ]
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “au1100fb_setmode”.
This issue was detected by using the Coccinelle software.
Fixes: 3b495f2bb749 ("Au1100 FB driver uplift for 2.6.")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7241c886a71797cc51efc6fadec7076fcf6435c2 ]
When a Hyper-V framebuffer device is removed, or the driver is unbound
from a device, any allocated and/or mapped memory must be released. In
particular, MMIO address space that was mapped to the framebuffer must
be unmapped. Current code unmaps the wrong address, resulting in an
error like:
[ 4093.980597] iounmap: bad address 00000000c936c05c
followed by a stack dump.
Commit d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for
Hyper-V frame buffer driver") changed the kind of address stored in
info->screen_base, and the iounmap() call in hvfb_putmem() was not
updated accordingly.
Fix this by updating hvfb_putmem() to unmap the correct address.
Fixes: d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250209235252.2987-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250209235252.2987-1-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de124b61e179e690277116e6be512e4f422b5dd8 ]
dss_of_port_get_parent_device() leaks an OF node reference when i >= 2
and struct device_node *np is present. Since of_get_next_parent()
obtains a reference of the returned OF node, call of_node_put() before
returning NULL.
This was found by an experimental verifier that I am developing, and no
runtime test was able to be performed due to that lack of actual
devices.
Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f89d17ae2ac42931be2a0153fecbf8533280c927 ]
When information such as info->screen_base is not ready, calling
sh7760fb_free_mem() does not release memory correctly. Call
dma_free_coherent() instead.
Fixes: 4a25e41831ee ("video: sh7760fb: SH7760/SH7763 LCDC framebuffer driver")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8404e56f4bc1d1a65bfc98450ba3dae5e653dda1 ]
Pass the hardware device to the DMA helpers dma_alloc_coherent() and
dma_free_coherent(). The fbdev device that is currently being used is
a software device and does not provide DMA memory. Also update the
related dev_*() output statements similarly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-28-tzimmermann@suse.de
Stable-dep-of: f89d17ae2ac4 ("fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9cf14f5a2746c19455ce9cb44341b5527b5e19c3 ]
The values of the variables xres and yres are placed in strbuf.
These variables are obtained from strbuf1.
The strbuf1 array contains digit characters
and a space if the array contains non-digit characters.
Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres);
more than 16 bytes will be written to strbuf.
It is suggested to increase the size of the strbuf array to 24.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a6921095eb04a900e0000da83d9475eb958e61e ]
In the pxafb_probe function, it calls the pxafb_init_fbinfo function,
after which &fbi->task is associated with pxafb_task. Moreover,
within this pxafb_init_fbinfo function, the pxafb_blank function
within the &pxafb_ops struct is capable of scheduling work.
If we remove the module which will call pxafb_remove to make cleanup,
it will call unregister_framebuffer function which can call
do_unregister_framebuffer to free fbi->fb through
put_fb_info(fb_info), while the work mentioned above will be used.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| pxafb_task
pxafb_remove |
unregister_framebuffer(info) |
do_unregister_framebuffer(fb_info) |
put_fb_info(fb_info) |
// free fbi->fb | set_ctrlr_state(fbi, state)
| __pxafb_lcd_power(fbi, 0)
| fbi->lcd_power(on, &fbi->fb.var)
| //use fbi->fb
Fix it by ensuring that the work is canceled before proceeding
with the cleanup in pxafb_remove.
Note that only root user can remove the driver at runtime.
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa578e897520f32ae12bec487f2474357d01ca9c ]
If an error occurs after request_mem_region(), a corresponding
release_mem_region() should be called, as already done in the remove
function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6ad959b6703e2c4c5d7af03b4cfd5ff608036339 upstream.
The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero")
checks the value of pixclock to avoid divide-by-zero error. However
the function savagefb_probe doesn't handle the error return of
savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error.
Fixes: 04e5eac8f3ab ("fbdev: savage: Error out if pixclock equals zero")
Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 51084f89d687e14d96278241e5200cde4b0985c7 ]
There is no reason to prohibit sh7760fb from being built as a
loadable module as suggested by Geert, so change the config symbol
from bool to tristate to allow that and change the FB dependency as
needed.
Fixes: f75f71b2c418 ("fbdev/sh7760fb: Depend on FB=y")
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 688cf598665851b9e8cb5083ff1d208ce43d10ff ]
Building with W=1 shows that a couple of variables in this driver are only
used in certain configurations:
drivers/video/fbdev/sis/init301.c:239:28: error: 'SiS_Part2CLVX_6' defined but not used [-Werror=unused-const-variable=]
239 | static const unsigned char SiS_Part2CLVX_6[] = { /* 1080i */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:230:28: error: 'SiS_Part2CLVX_5' defined but not used [-Werror=unused-const-variable=]
230 | static const unsigned char SiS_Part2CLVX_5[] = { /* 750p */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:211:28: error: 'SiS_Part2CLVX_4' defined but not used [-Werror=unused-const-variable=]
211 | static const unsigned char SiS_Part2CLVX_4[] = { /* PAL */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:192:28: error: 'SiS_Part2CLVX_3' defined but not used [-Werror=unused-const-variable=]
192 | static const unsigned char SiS_Part2CLVX_3[] = { /* NTSC, 525i, 525p */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:184:28: error: 'SiS_Part2CLVX_2' defined but not used [-Werror=unused-const-variable=]
184 | static const unsigned char SiS_Part2CLVX_2[] = {
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:176:28: error: 'SiS_Part2CLVX_1' defined but not used [-Werror=unused-const-variable=]
176 | static const unsigned char SiS_Part2CLVX_1[] = {
| ^~~~~~~~~~~~~~~
This started showing up after the definitions were moved into the
source file from the header, which was not flagged by the compiler.
Move the definition into the appropriate #ifdef block that already
exists next to them.
Fixes: 5908986ef348 ("video: fbdev: sis: avoid mismatched prototypes")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26c8cfb9d1e4b252336d23dd5127a8cbed414a32 ]
The name of the overlay does not fit into the fixed-length field:
drivers/video/fbdev/sh_mobile_lcdcfb.c:1577:2: error: 'snprintf' will always be truncated; specified size is 16, but format string expands to at least 25
Make it short enough by changing the string.
Fixes: c5deac3c9b22 ("fbdev: sh_mobile_lcdc: Implement overlays support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
