summaryrefslogtreecommitdiff
path: root/drivers/video/fbdev
AgeCommit message (Collapse)AuthorFilesLines
2016-01-23wrappers for ->i_mutex accessAl Viro1-2/+2
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-18Merge tag 'fbdev-4.5' of ↵Linus Torvalds80-1845/+664
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: "Summary: - pxafb: device-tree support - An unsafe kernel parameter 'lockless_register_fb' for debugging problems happening while inside the console lock - Small miscellaneous fixes & cleanups - omapdss: add writeback support functions - Separation of omapfb and omapdrm (see below) About the separation of omapfb and omapdrm, see http://permalink.gmane.org/gmane.comp.video.dri.devel/143151 for longer story. The short version: omapfb and omapdrm have shared low level drivers (omapdss and panel drivers), making further development of omapdrm difficult. After these patches omapfb and omapdrm have their own versions of the drivers, which are more or less direct copies for now but will diverge soon. This also means that omapfb (everything under drivers/video/fbdev/omap2/) is now in maintenance mode, and all new development will be done for omapdrm (drivers/gpu/drm/omapdrm/)" * tag 'fbdev-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (49 commits) video: fbdev: pxafb: fix out of memory error path drm/omap: make omapdrm select OMAP2_DSS drm/omap: move omapdss & displays under omapdrm omapfb: move vrfb into omapfb omapfb: take omapfb's private omapdss into use omapfb/displays: change CONFIG_DISPLAY_* to CONFIG_FB_OMAP2_* omapfb/dss: change CONFIG_OMAP* to CONFIG_FB_OMAP* omapdss: remove CONFIG_OMAP2_DSS_VENC from omapdss.h omapfb: copy omapdss & displays for omapfb omapfb: allow compilation only if DRM_OMAP is disabled fbdev: omap2: panel-dpi: simplify gpio setting fbdev: omap2: panel-dpi: in .disable first disable backlight then display OMAPDSS: DSS: fix a warning message video: omapdss: delete unneeded of_node_put OMAPDSS: DISPC: Remove boolean comparisons OMAPDSS: DSI: cleanup DSI_IRQ_ERROR_MASK define OMAPDSS: remove extra out == NULL checks OMAPDSS: change internal dispc functions to static OMAPDSS: make a two dss feat funcs internal to omapdss OMAPDSS: remove extra EXPORT_SYMBOLs ...
2016-01-18video: fbdev: pxafb: fix out of memory error pathRobert Jarzmik1-0/+2
As seen by Julia, the initial allocation memory is not checked anymore after commit "video: fbdev: pxafb: initial devicetree conversion". Introduce back the removed test. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-01-07video: fbdev: via: use gpiochip data pointerLinus Walleij1-11/+6
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05fbdev: via-gpio: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-29drm/omap: move omapdss & displays under omapdrmTomi Valkeinen58-36331/+0
Now that omapfb has its own copy of omapdss and display drivers, we can move omapdss and display drivers which omapdrm uses to omapdrm's directory. We also need to change the main drm Makefile so that omapdrm directory is always entered, because omapdss has a file that can't be built as a module. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Dave Airlie <airlied@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com>
2015-12-29omapfb: move vrfb into omapfbTomi Valkeinen5-5/+4
VRFB is only used by omapfb, so we can move it under omapfb's directory. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Dave Airlie <airlied@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com>
2015-12-29omapfb: take omapfb's private omapdss into useTomi Valkeinen3-1/+11
omapfb's private copy of omapdss is now ready to be used. This patch makes omapfb use its private omapdss and display drivers, and also makes omap_vout (which uses omapfb) to depend on omapfb. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Dave Airlie <airlied@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com>
2015-12-29omapfb/displays: change CONFIG_DISPLAY_* to CONFIG_FB_OMAP2_*Tomi Valkeinen2-30/+30
We need to change the config symbols of omapfb's private copy of the panel and encoder drivers so that we won't have config symbol conflicts. This patch changes the symbols from the panel and encoder drivers using simple replacement of DISPLAY_* to FB_OMAP2*. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Dave Airlie <airlied@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com>
2015-12-29omapfb/dss: change CONFIG_OMAP* to CONFIG_FB_OMAP*Tomi Valkeinen10-75/+69
We need to change the config symbols of omapfb's private copy of omapdss so that we won't have config symbol conflicts. This patch changes the symbols from omapdss using simple replacement of CONFIG_OMAP* to CONFIG_FB_OMAP*. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Dave Airlie <airlied@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com>
2015-12-29omapfb: copy omapdss & displays for omapfbTomi Valkeinen56-0/+36276
This patch makes a copy of the omapdss driver and the omap panel & encoder drivers for omapfb. The purpose is to separate omapdrm and omapfb drivers from each other. Note that this patch only does a direct copy of the files without any other modifications. The files are not yet used. The original files are in: drivers/video/fbdev/omap2/dss/ drivers/video/fbdev/omap2/displays-new/ Here's a more detailed explanation about this and the following patches, from the introduction mail of the patch series: A short background on the current status. We have the following entities: * omapdss, located in drivers/video/fbdev/omap2/dss/. This is a driver for the display subsystem IPs used on OMAP (and related) SoCs. It offers only a kernel internal API, and does not implement anything for fbdev or drm. * omapdss panels and encoders, located in drivers/video/fbdev/omap2/displays-new/. These are panel and external encoder drivers, which use APIs offered by omapdss driver. These also don't implement anything for fbdev or drm. * omapdrm, located in drivers/gpu/drm/omapdrm/. This is a drm driver, which uses omapdss and the panel/encoder drivers to operate the hardware. * omapfb, located in drivers/video/fbdev/omap2/omapfb/. This is an fbdev driver, which uses omapdss and the panel/encoder drivers to operate the hardware. * omap_vout, located in drivers/media/platform/omap/. This is a v4l2 driver, which uses omapdss and omapfb to implement a v4l2 API for the video overlays. So, on the top level, we have either omapdrm, or omapfb+omap_vout. Both of those use the same low level drivers. Without going to the historical details why the architecture is like that, I think it's finally time to change that. The situation with omapfb+omap_vout is that it still works, but no new features have been added for a long time, and I want to keep it working as it's still being used. At some point in the future I'd like to remove omapfb and omap_vout altogether. Omapdrm, on the other hand, is being actively developed. Sharing the low level parts with omapfb makes that development more difficult than it should be. It also "hides" half of the development, as everything happening in the low level parts resides under fbdev directory, not in the drm directory. I've been wanting to clean this up for a long time, but I haven't figured out a very good way to do it. I still haven't, but here's the best way I have come up with. This series makes a full copy of the low level parts, omapdss and panel/encoder drivers. Both omapfb+omap_vout and omapdrm will have their own versions. The copy omapfb+omap_vout get is a new copy, and the copy that omapdrm gets is just the current files moved. This way git will associate the omapdrm version with the old files. The omapfb+omap_vout versions won't be touched unless there are some big issues there. The omapdrm versions can be refactored and cleaned up, as the omapfb support code is no longer needed. We can perhaps also merge omapdss and omapdrm into the same kernel module. This series only does the copy, and the absolutely necessary parts. No further cleanups are done yet. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Dave Airlie <airlied@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com>
2015-12-29omapfb: allow compilation only if DRM_OMAP is disabledTomi Valkeinen1-1/+2
At the moment omapfb and omapdrm can be compiled at the same time, if both are modules. However, they can't be both loaded, as they use the same hardware. This has been mostly for compile testing. To make it clear that omapfb and omapdrm are mutually exclusive drivers, this patch makes omapfb available only if omapdrm is disabled. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Dave Airlie <airlied@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com>
2015-12-29fbdev: omap2: panel-dpi: simplify gpio settingUwe Kleine-König1-4/+2
gpiod_set_value_cansleep is a noop when the passed descriptor is NULL. So there is no need to duplicate the check for NULL; just call the function unconditionally instead. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29fbdev: omap2: panel-dpi: in .disable first disable backlight then displayUwe Kleine-König1-3/+3
This makes .disable operate in reverse order compared to .enable. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: DSS: fix a warning messageDan Carpenter1-1/+2
The WARN() macro has to take a condition. The current code will just print the stack trace and the function name instead of the intended warning message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29video: omapdss: delete unneeded of_node_putJulia Lawall1-3/+1
Device node iterators perform an of_node_put on each iteration, so putting an of_node_put before a continue results in a double put. A simplified version of the semantic match that finds this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator i; @@ i(..., child, ...) { ... when != of_node_get(child) * of_node_put(child); ... * continue; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: DISPC: Remove boolean comparisonsLuis de Bethencourt3-7/+7
Boolean tests do not need explicit comparison to true or false. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: DSI: cleanup DSI_IRQ_ERROR_MASK defineDan Carpenter1-1/+1
DSI_IRQ_SYNC_LOST was ORed twice so we can remove one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: remove extra out == NULL checksTomi Valkeinen7-7/+7
All the output drivers check for 'out' being NULL, but it can never be NULL. Remove the check. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-12-29OMAPDSS: change internal dispc functions to staticTomi Valkeinen2-10/+10
A bunch of dispc functions are only used inside dispc, so we can make them static. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-12-29OMAPDSS: make a two dss feat funcs internal to omapdssTomi Valkeinen2-2/+4
dss_feat_get_supported_displays() and dss_feat_get_supported_outputs() are not used outside omapdss, but are exported. We can thus remove the export and move the declarations to the omapdss internal header. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-12-29OMAPDSS: remove extra EXPORT_SYMBOLsTomi Valkeinen1-2/+0
The functions dispc_ovl_set_fifo_threshold and dispc_ovl_compute_fifo_thresholds are exported, but not declared in public headers, and thus are not used outside omapdss. So we can remove the EXPORT_SYMBOL()s. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-12-29OMAPDSS: add setup for WB capture mode in dispc_wb_setup()Tomi Valkeinen1-0/+15
dispc_wb_setup() handles configuration only for mem-to-mem case. This patch adds the necessary configuration to handle also display capture mode. We need to set CAPTUREMODE to 0 (continuous capture), and WBDELAYCOUNT according to the vertical timings of the display, so that the WB FIFO has time to flush before the next frame starts. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: set WB capturemode for m2m modeTomi Valkeinen1-0/+2
In mem-to-mem mode WB CAPTUREMODE needs to be set to 1 (capture one frame). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: fix rgb-to-yuv color conv coefsTomi Valkeinen1-1/+3
The color conversion coefficients for RGB to YUV conversion (used with writeback) don't result in the correct result. This patch sets the correct coefficients. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: skip pclk check for WB mem2memTomi Valkeinen1-1/+1
When doing mem-to-mem writeback, there's no pixelclock. However, the code that calculates scaling factors check that there is a pixel clock. We can just skip the check when doing mem-to-mem writeback. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: configure WB mflag thresholdTomi Valkeinen1-0/+19
Mflag thresholds for all pipelines are set in dispc_init_mflag(), but we are missing that for WB pipeline. Add WB configuration. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: configure WB fifo thresholdsTomi Valkeinen1-0/+11
Fifo thresholds for all pipelines are set in dispc_init_fifos(), but we are missing it for WB pipeline. Add that. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: configure burst size for WBTomi Valkeinen1-0/+2
Burst size for all pipelines is set in dispc_configure_burst_sizes(), but we are missing WB pipe. So add that. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: handle WB channel in dispc_set/get_channel_outTomi Valkeinen1-0/+6
Add handling of OMAP_DSS_CHANNEL_WB to dispc_ovl_set_channel_out() and dispc_ovl_get_channel_out(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: refactor dispc_ovl_get_channel_outTomi Valkeinen1-17/+14
Refactor dispc_ovl_get_channel_out() to a bit cleaner form, which makes it easier to add support for writeback in the following patch. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: add 'has_writeback' flagTomi Valkeinen3-15/+7
At the moment we have a function to get the number of writeback pipelines supported. However, the function is used in a wrong way, causing a wrong pipeline to get configured when trying to use WB. Also, we only have a single writeback pipeline on any of the DSS versions. To fix and simplify this, create a 'has_writeback' flag into the dispc driver, and after checking the flag, use OMAP_DSS_WB pipeline explicitly when calling the configuration functions. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: add num_wbs=1 to omap5 dss featuresTomi Valkeinen1-0/+1
OMAP5+ DSS has a writeback pipeline, but this was not specified in the features list for OMAP5 DSS. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: add WB to register dumpTomi Valkeinen1-0/+30
Add dumping of the writeback registers to the register dump function. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-29OMAPDSS: fix DISPC_MFLAG_THRESHOLD_OFFSET for WBTomi Valkeinen1-0/+2
DISPC_MFLAG_THRESHOLD_OFFSET() is missing the offset for WB. Add the offset. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-17OMAPDSS: DISPC: always set ALIGN when availableTomi Valkeinen1-0/+9
By default DISPC asserts hsync and vsync sequentially, i.e. there's first hsync and that is immediately followed by vsync. This is the only available behaviour on OMAP2/3, and default behaviour on OMAP4+. OMAP4+ has ALIGN bit in POL_FREQ register, which makes DISPC assert both syncs at the same time. It has been observed that some panels don't like sequential syncs (AM5 EVM's panel). After studying the datasheets for multiple panels and encoders, and MIPI DPI spec, it looks like there is no standard way to handle this. Sometimes the datasheets don't mention the required syncs behaviour at all, sometimes the datasheets have images that hint towards simultaneous syncs, and sometimes it is explicitly mentioned that simultaneous syncs are needed. No panels or encoders requiring sequential sync was found. It thus seems to be safe to default to simultaneous syncs when the ALIGN bit is available. This fixed AM5 EVM's panel, and no side effects have been observed on other panels or encoders. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-12-17OMAPDSS: adopt pinctrl supportDave Gerlach1-0/+6
Update omapdss driver to set the state of the pins to: - "default on resume - "sleep" on suspend By optionally putting the pins into sleep state in the suspend callback we can accomplish two things. - minimize current leakage from pins and thus save power, - prevent the IP from driving pins output in an uncontrolled manner, which may happen if the power domain drops the domain regulator. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15video: fbdev: pxafb: initial devicetree conversionRobert Jarzmik2-3/+159
This patch brings a first support of pxa framebuffer devices to a devicetree pxa platform, as was before platform data. There are restrictions with this port, the biggest one being the lack of support of smart panels. Moreover the conversion doesn't provide a way to declare multiple framebuffer configurations with different bits per pixel, only the LCD hardware bus width is used. The patch was tested on both pxa25x, pxa27x and pxa3xx platform (namely lubbock, mainstone and zylonite). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15video: fbdev: pxafb: loosen the platform data bondRobert Jarzmik2-20/+36
In order to prepare the transition to a mixed platform data and device-tree initialization, remove all the platform data references all over the driver. Copy the platform data into the internal structure of the pxafb, and only use this afterward. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15fbdev: Make fb-notify a no-op if CONFIG_FB=nEzequiel Garcia2-1/+5
There's no point in having support for framebuffer notifications is CONFIG_FB is disabled. This commit adds the necessary stubs for code to link properly when CONFIG_FB=n and moves fb-notify.o to be built only when CONFIG_FB=y. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15fbdev: Debug knob to register without holding console_lockDaniel Vetter1-3/+11
When the usual fbcon legacy options are enabled we have ->register_framebuffer ->fb notifier chain calls into fbcon ->fbcon sets up console on new fbi ->fbi->set_par ->drm_fb_helper_set_par exercises full kms api And because of locking inversion hilarity all of register_framebuffer is done with the console lock held. Which means that the first time on driver load we exercise _all_ the kms code (all probe paths and modeset paths for everything connected) is under the console lock. That means if anything goes belly-up in that big pile of code nothing ever reaches logfiles (and the machine is dead). Usual tactic to debug that is to temporarily remove those console_lock calls to be able to capture backtraces. I'm fed up writing this patch and recompiling kernels. Hence this patch here to add an unsafe, kernel-taining option to do this at runtime. Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15video: fbdev: rivafb: unlock chip before probiding EDIDDmitry Eremin-Solenikov1-0/+1
At least NV3 requires for chip to be unlocked before it is possible to access I2C registers. Without it, it is not possible to read EDID. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15fbdev: sm712fb: avoid unused function warningsArnd Bergmann1-13/+3
The sm712fb framebuffer driver encloses the power-management functions in #ifdef CONFIG_PM, but the smtcfb_pci_suspend/resume functions are only really used when CONFIG_PM_SLEEP is also set, as a frequent gcc warning shows: fbdev/sm712fb.c:1549:12: warning: 'smtcfb_pci_suspend' defined but not used fbdev/sm712fb.c:1572:12: warning: 'smtcfb_pci_resume' defined but not used The driver also avoids using the SIMPLE_DEV_PM_OPS macro when CONFIG_PM is unset, which is redundant. This changes the driver to remove the #ifdef and instead mark the functions as __maybe_unused, which is a nicer anyway, as it provides build testing for all the code in all configurations and is harder to get wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15fbdev: auo_k190x: avoid unused function warningsArnd Bergmann1-7/+4
The auo_k190x framebuffer driver encloses the power-management functions in #ifdef CONFIG_PM, but the auok190x_suspend/resume functions are only really used when CONFIG_PM_SLEEP is also set, as a frequent gcc warning shows: drivers/video/fbdev/auo_k190x.c:859:12: warning: 'auok190x_suspend' defined but not used drivers/video/fbdev/auo_k190x.c:899:12: warning: 'auok190x_resume' defined but not used This changes the driver to remove the #ifdef and instead mark the functions as __maybe_unused, which is a nicer anyway, as it provides build testing for all the code in all configurations and is harder to get wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15fbdev: sis: enforce selection of at least one backendArnd Bergmann1-0/+1
The sis framebuffer driver complains with a compile-time warning if neither the FB_SIS_300 nor FB_SIS_315 symbols are selected: drivers/video/fbdev/sis/sis_main.c:61:2: warning: #warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is se This is reasonable because it doesn't work in that case, but it's also annoying for randconfig builds and is one of the most common warnings I'm seeing on ARM now. This changes the Kconfig logic to prevent the silly configuration, by always selecting the FB_SIS_300 variant if the other one is not set. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15fbdev: Remove unused SH-Mobile HDMI driverGeert Uytterhoeven3-1500/+0
As of commit 44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), the SH-Mobile HDMI driver is no longer used. In theory it could still be used on R-Mobile A1 SoCs, but that requires adding DT support to the driver, which is not planned. Remove the driver, it can be resurrected from git history when needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15video: constify geode ops structuresJulia Lawall5-6/+6
These geode ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15simplefb: Claim and enable regulatorsChen-Yu Tsai1-1/+119
This claims and enables regulators listed in the simple framebuffer dt node. This is needed so that regulators powering the display pipeline and external hardware, described in the device node and known by the kernel code, will remain properly enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15drivers/video/fbdev/i740fb: remove unused variableSudip Mukherjee1-5/+3
The value of d_best is always 0 and never changes. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-09OMAPDSS: fix timings for VENC to match what omapdrm expectsH. Nikolaus Schaller1-0/+12
Otherwise check_timings fails and we get a "has no modes" message from xrandr. This fix makes the venc assume PAL and NTSC timings that match the timings synthetized by copy_timings_drm_to_omap() from omapdrm mode settings so that check_timings() succeeds. Tested on: BeagleBoard XM, GTA04 and OpenPandora Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-19 00:00:11 +0300