summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2016-10-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2-190/+0
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
2016-10-12treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada3-3/+0
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11Merge branch 'for-linus' of ↵Linus Torvalds3-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: ">rename2() work from Miklos + current_time() from Deepa" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Replace current_fs_time() with current_time() fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps fs: Replace CURRENT_TIME with current_time() for inode timestamps fs: proc: Delete inode time initializations in proc_alloc_inode() vfs: Add current_time() api vfs: add note about i_op->rename changes to porting fs: rename "rename2" i_op to "rename" vfs: remove unused i_op->rename fs: make remaining filesystems use .rename2 libfs: support RENAME_NOREPLACE in simple_rename() fs: support RENAME_NOREPLACE for local filesystems ncpfs: fix unused variable warning
2016-10-11Merge remote-tracking branch 'ovl/rename2' into for-linusAl Viro3-13/+20
2016-10-08Merge tag 'armsoc-late' of ↵Linus Torvalds1-0/+34
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an automotive SoC similar to the ⅹ8a7795 chip we already support, but the dts changes rely on a clock driver change that has been merged for v4.9 through the clk tree. - The Amlogic meson-gxbb (S905) platform gains support for a few drivers merged through our tree, in particular the network and usb driver changes are required and included here, and also the clk tree changes. - The Allwinner platforms have seen a large-scale change to their clk drivers and the dts file updates must come after that. This includes the newly added Nextthing GR8 platform, which is derived from sun5i/A13. - Some integrator (arm32) changes rely on clk driver changes. - A single patch for lpc32xx has no such dependency but wasn't added until just before the merge window" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) ARM: dts: lpc32xx: add device node for IRAM on-chip memory ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03 ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board ARM: dts: sun8i: add pinmux for UART1 at PG dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC dts: sun8i-h3: add pinmux definitions for I2C0-2 dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux dts: sun8i-h3: add pinmux definitions for UART2-3 ARM: dts: sun9i: a80-optimus: Disable EHCI1 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes ...
2016-10-05USB: host: ehci-sead3: Remove SEAD-3 EHCI codePaul Burton2-190/+0
The SEAD-3 board is now probing its EHCI controller using the generic EHCI driver & its generic-ehci device tree binding. Remove the unused SEAD-3 specific EHCI code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-usb@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14052/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-28Revert "usbtmc: convert to devm_kzalloc"Greg Kroah-Hartman1-1/+2
This reverts commit e6c7efdcb76f11b04e3d3f71c8d764ab75c9423b. Turns out it was totally wrong. The memory is supposed to be bound to the kref, as the original code was doing correctly, not the device/driver binding as the devm_kzalloc() would cause. This fixes an oops when read would be called after the device was unbound from the driver. Reported-by: Ladislav Michl <ladis@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@vger.kernel.org> # 3.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28fs: Replace CURRENT_TIME with current_time() for inode timestampsDeepa Dinamani3-14/+14
CURRENT_TIME macro is not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Use current_time() instead. CURRENT_TIME is also not y2038 safe. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. As part of the effort current_time() will be extended to do range checks. Hence, it is necessary for all file system timestamps to use current_time(). Also, current_time() will be transitioned along with vfs to be y2038 safe. Note that whenever a single call to current_time() is used to change timestamps in different inodes, it is because they share the same time granularity. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: David Sterba <dsterba@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27USB: serial: cp210x: Add ID for a Juniper consoleKyle Jones1-0/+1
Signed-off-by: Kyle Jones <kyle@kf5jwc.us> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27usb: Kconfig: using select for USB_COMMON dependencyPeter Chen2-3/+5
According to (badf6d47f8a9 "usb: common: rework CONFIG_USB_COMMON logic") we should select USB_COMMON at Kconfig when usb common stuffs are needed, but some of Kconfig enties have not followed it, update them. Cc: Felipe Balbi <balbi@kernel.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27usb: hub: change CLEAR_FEATURE to SET_FEATUREYonglong Wu1-1/+1
In USB20 specification, describes in chapter 9.4.5: The Remote Wakeup field can be modified by the SetFeature() and ClearFeature() requests using the DEVICE_REMOTE_WAKEUP feature selector. In USB30 specification, also describes in chapter 9.4.5: The Function Remote Wakeup field can be modified by the SetFeature() requests using the FUNCTION_SUSPEND feature selector. In chapter 9.4.9 Set Feature reference, it describes Function Remote Wake Enabled/Disabled at suspend options by SET_FEATURE. In USB30 specification only mentioned SetFeature(), so we need use SET_FEATURE replace CLEAR_FEATURE to disable USB30 function remote wakeup in suspend options. Signed-off-by: Yonglong Wu <yonglong.wu@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27usb: core: Introduce a USB port LED triggerRafał Miłecki3-0/+324
This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27USB: bcma: drop Northstar PHY 2.0 initialization codeRafał Miłecki1-55/+25
This driver should initialize controller only, PHY initialization should be handled by separated PHY driver. We already have phy-bcm-ns-usb2 in place so let it makes its duty. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27usb: core: hcd: add missing header dependenciesBaoyou Xie1-0/+1
We get 1 warning when building kernel with W=1: drivers/usb/core/hcd.c:2390:5: warning: no previous prototype for 'usb_bus_start_enum' [-Wmissing-prototypes] In fact, these functions are declared in linux/usb/otg.h, so this patch adds the missing header dependencies. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-23usb: musb: da8xx: fix error handling message in probeArnd Bergmann1-7/+7
We print an error message when platform_device_register_full() fails, but the initialization of the argument has been removed, as shown in this warning: drivers/usb/musb/da8xx.c: In function 'da8xx_probe': drivers/usb/musb/da8xx.c:521:3: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This modifies the function to assign the return code before checking it, and does uses the same method in the check for usb_phy_generic_register() as well. Fixes: 947c49afe41f ("usb: musb: da8xx: Remove mach code") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-23usb: musb: Fix session based PM for first invalid VBUSTony Lindgren2-5/+9
With the session bit based PM runtime working on musb, we've implemented few quirks to attempt to detect the current state of the hardware. One of the quirks is for invalid VBUS as peripheral, but it is not working in all cases. If we start musb on dm3730 as a peripheral with no cable connected, we will get the devctl 91 state once and will never idle as there are not further interrupts from musb. So we need to ignore the first devctl 91 state as there will be more interrupts if we're connected. The invalid VBUS state also can happen always when connected to certain USB hubs. Looks like musb on dm3730 can claim invalid VBUS with some hubs while 3717-evm and BeagleBone don't. This causes session as peripheral to fail for dm3730 with some hubs. This too is fixed by ignoring only the first invalid VBUS. When connected, we can just look at the session bit as that will clear automatically when the session ends. Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-23usb: musb: Fix PM runtime for disconnect after unconfigureTony Lindgren1-0/+3
If we unconfigure musb as a USB peripheral with cable connected, and then remove the cable, no interrupts will happen. And musb thinks we're still connected keeping the device active. Now with the session bit based PM runtime working for musb, we can fix this issue by calling musb irq_work. That rechecks the devctl register and reconfigures PM runtime based on the devctl. Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22musb: Export musb_root_disconnect for use in modulesHans de Goede1-0/+1
Export musb_root_disconnect for use in modules, so that musb glue code build as module can use it. This fixes the buildbot errors for -next in arm64-allmodconfig and arm-allmodconfig. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 7cba17ec9adc8cf ("musb: sunxi: Add support for platform_set_mode") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-21usb: misc: legousbtower: Fix NULL pointer deferenceGreg Kroah-Hartman1-18/+17
This patch fixes a NULL pointer dereference caused by a race codition in the probe function of the legousbtower driver. It re-structures the probe function to only register the interface after successfully reading the board's firmware ID. The probe function does not deregister the usb interface after an error receiving the devices firmware ID. The device file registered (/dev/usb/legousbtower%d) may be read/written globally before the probe function returns. When tower_delete is called in the probe function (after an r/w has been initiated), core dev structures are deleted while the file operation functions are still running. If the 0 address is mappable on the machine, this vulnerability can be used to create a Local Priviege Escalation exploit via a write-what-where condition by remapping dev->interrupt_out_buffer in tower_write. A forged USB device and local program execution would be required for LPE. The USB device would have to delay the control message in tower_probe and accept the control urb in tower_open whilst guest code initiated a write to the device file as tower_delete is called from the error in tower_probe. This bug has existed since 2003. Patch tested by emulated device. Reported-by: James Patrick-Evans <james@jmp-e.com> Tested-by: James Patrick-Evans <james@jmp-e.com> Signed-off-by: James Patrick-Evans <james@jmp-e.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-21cdc-acm: hardening against malicious devicesOliver Neukum1-0/+5
This should fix the last holes against malicious devices still open in cdc-acm. It cannot go into stable due to the introduction of the common parser. The fix for stable already merged also covers the problems this patch fixes. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-19Merge tag 'amlogic-drivers-2' of ↵Arnd Bergmann1-0/+34
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late Pull "Amlogic driver updates for v4.9, 2nd round" from Kevin Hilman: - media: update IR support for newer SoCs - firmware: add secure monitor driver - net: new stmmac glue driver - usb: udd DWC2 support for meson-gxbb - clocks: expose more clock IDs for use by DT - DT binding updates * tag 'amlogic-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (21 commits) clk: gxbb: expose i2c clocks clk: gxbb: expose USB clocks clk: gxbb: expose spifc clock clk: gxbb: expose MPLL2 clock for use by DT Documentation: dt-bindings: Add documentation for the Meson USB2 PHYs usb: dwc2: add support for Meson8b and GXBB SoCs net: stmmac: update the module description of the dwmac-meson driver net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC stmmac: introduce get_stmmac_bsp_priv() helper net: dt-bindings: Document the new Meson8b and GXBB DWMAC bindings clk: meson-gxbb: Export PWM related clocks for DT meson: clk: Add support for clock gates gxbb: clk: Adjust MESON_GATE macro to be shared with meson8b clk: meson: Copy meson8b CLKID defines to private header file meson: clk: Rename register names according to Amlogic datasheet meson: clk: Move register definitions to meson8b.h clk: meson: Rename meson8b-clkc.c to reflect gxbb naming convention nvmem: amlogic: Add Amlogic Meson EFUSE driver firmware: Amlogic: Add secure monitor driver media: rc: meson-ir: Add support for newer versions of the IR decoder ...
2016-09-19Revert "usb: gadget: NCM: Protect dev->port_usb using dev->lock"Greg Kroah-Hartman1-5/+2
This reverts commit c9ffc78745f89e300fe704348dd8e6800acf4d18 as it was reported to be broken. Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Jim Baxter <jim_baxter@mentor.com> Cc: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-19Merge 4.8-rc7 into usb-nextGreg Kroah-Hartman3-13/+20
We want/need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16Merge tag 'usb-serial-4.9-rc1' of ↵Greg Kroah-Hartman2-115/+60
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.9-rc1 More clean ups, including a second set of changes from Mathieu as part of a major overhaul of the ti_usb_3410_5052 driver. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-09-16Merge tag 'usb-serial-4.8-rc7' of ↵Greg Kroah-Hartman1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.8-rc7 Here's another Infineon flashloader device id. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-09-16USB: change bInterval default to 10 msAlan Stern1-11/+17
Some full-speed mceusb infrared transceivers contain invalid endpoint descriptors for their interrupt endpoints, with bInterval set to 0. In the past they have worked out okay with the mceusb driver, because the driver sets the bInterval field in the descriptor to 1, overwriting whatever value may have been there before. However, this approach was never sanctioned by the USB core, and in fact it does not work with xHCI controllers, because they use the bInterval value that was present when the configuration was installed. Currently usbcore uses 32 ms as the default interval if the value in the endpoint descriptor is invalid. It turns out that these IR transceivers don't work properly unless the interval is set to 10 ms or below. To work around this mceusb problem, this patch changes the endpoint-descriptor parsing routine, making the default interval value be 10 ms rather than 32 ms. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Wade Berrier <wberrier@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16usb: musb: Fix tusb6010 compile error on blackfinTony Lindgren1-1/+1
We have CONFIG_BLACKFIN ifdef redefining all musb registers in musb_regs.h and tusb6010.h is never included causing a build error with blackfin-allmodconfig and COMPILE_TEST. Let's fix the issue by not building tusb6010 if CONFIG_BLACKFIN is selected. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15Merge tag 'usb-ci-v4.9-rc1' of ↵Greg Kroah-Hartman5-29/+42
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-testing Peter writes: Most of them are refine patches, only new feature is disable io watchdog for chipidea platform.
2016-09-14Merge tag 'usb-for-v4.9' of ↵Greg Kroah-Hartman39-487/+1047
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.9 merge window This time around we have 92 non-merge commits. Most of the changes are in drivers/usb/gadget (40.3%) with drivers/usb/gadget/function being the most active directory (27.2%). As for UDC drivers, only dwc3 (26.5%) and dwc2 (12.7%) have really been active. The most important changes for dwc3 are better support for scatterlist and, again, throughput improvements. While on dwc2 got some minor stability fixes related to soft reset and FIFO usage. Felipe Tonello has done some good work fixing up our f_midi gadget and Tal Shorer has implemented a nice API change for our ULPI bus. Apart from these, we have our usual set of non-critical fixes, spelling fixes, build warning fixes, etc.
2016-09-14usb: dwc2: add support for Meson8b and GXBB SoCsJerome Brunet1-0/+34
Add compatible strings for amlogic Meson8b and GXBB SoCs with the corresponding configuration parameters. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14usb: chipidea: udc: Use the preferred form for passing a size of a structFabio Estevam1-1/+1
According to Documentation/CodingStyle: "The preferred form for passing a size of a struct is the following: p = kmalloc(sizeof(*p), ...); " , so do as suggested to improve readability. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-14usb: chipidea: udc: Fit into a single lineFabio Estevam1-2/+1
No need to split the dma_pool_zalloc() line into two as it can perfectly fit into a single line. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-14usb: chipidea: udc: Use dma_pool_zalloc()Fabio Estevam1-4/+2
We can make the code simpler by using dma_pool_zalloc() instead of calling dma_pool_alloc() and then a memset(). Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-14usb: chipidea: host: disable io watchdogLucas Stach1-0/+3
The Chipidea EHCI core seems to behave sanely and doesn't need the IO watchdog. This kills off 10 non-deferrable wakeup events per second when the controller is otherwise idle. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-14usb: chipidea: udc: Use direction flags consequentlyStefan Wahren1-11/+11
This driver make assumptions about the value of the direction flags. So better use them in comparisons to improve the readability. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-14usb: chipidea: imx: set over current polarity per dts settingLi Jun3-5/+21
imx usb over current polarity is low active by default, with over-current-active-high property added, user can config it to be high active. Meanwhile keep this setting unchanged for existing platforms so new platform must set the right value for active low by its usbmisc init function if over current is enabled. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-14usb: chipidea: udc: Don't flush endpoint fifo twiceStefan Wahren1-1/+0
The endpoint fifo is already flushed in _ep_nuke so there is no need to flush it twice. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-14usb: chipidea: udc: move write barrier into hw_ep_primeStefan Wahren1-5/+3
Since there should be a write barrier before every call of hw_ep_prime we could move it into hw_ep_prime. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-13usb: ohci: Allow ohci on omap5 alsoTony Lindgren1-1/+1
With LPAE config we don't have omap3 or omap4 selected for omap5 variants. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13usb: core: setup dma_pfn_offset for USB devices and, interfacesRoger Quadros2-0/+16
If dma_pfn_offset is not inherited correctly from the host controller, it might result in sub-optimal configuration as bounce buffer limit might be set to less than optimal level. Consider the mass storage device case. USB storage driver creates a scsi host for the mass storage interface in drivers/usb/storage/usb.c The scsi host parent device is nothing but the the USB interface device. Now, __scsi_init_queue() calls scsi_calculate_bounce_limit() to find out and set the block layer bounce limit. scsi_calculate_bounce_limit() uses dma_max_pfn(host_dev) to get the bounce_limit. host_dev is nothing but the device representing the mass storage interface. If that device doesn't have the right dma_pfn_offset, then dma_max_pfn() is messed up and the bounce buffer limit is wrong. e.g. On Keystone 2 systems, dma_max_pfn() is 0x87FFFF and dma_mask_pfn is 0xFFFFF. Consider a mass storage use case: Without this patch, usb scsi host device (usb-storage) will get a dma_pfn_offset of 0 resulting in a dma_max_pfn() of 0xFFFFF within the scsi layer (scsi_calculate_bounce_limit()). This will result in bounce buffers being unnecessarily used. Hint: On 32-bit ARM platforms dma_max_pfn() = dma_mask_pfn + dma_pfn_offset Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13USB: host: ohci-at91: fix non static symbol warningWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/usb/host/ohci-at91.c:141:15: warning: symbol 'at91_dt_syscon_sfr' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13usb: host: xhci-tegra: Fix error return code in tegra_xusb_probe()Wei Yongjun1-0/+1
Fix to return error code -ENOMEM from the usb_create_shared_hcd() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13ezusb: constify local structuresJulia Lawall1-1/+1
For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13USB: wusbcore: add in missing white space in error message textColin Ian King1-2/+1
A dev_err message spans two lines and the literal string is missing a white space between words. Add the white space and reformat the message to not span multiple lines. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13cdc-acm: cleaning up debug in data submission pathOliver Neukum1-10/+6
Further cleanup making the debug messages more precise, useful and removing mere trace points. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13cdc-acm: cleanup debugging in submission pathOliver Neukum1-4/+4
Actually make it retutn useful information. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13usb: musb: remove redundant stack buffersRasmus Villemoes1-7/+5
aDate is always the empty string, so entirely pointless. The aRevision formatting might as well be done as part of the pr_debug() call - that also avoids it altogether if pr_debug is compiled out. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13usb: musb: am35x: fix error return code in am35x_probe()Wei Yongjun1-1/+3
Fix to return a negative error code from the usb_phy_generic_register() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13usb: musb: da8xx: Remove mach codeDavid Lechner2-86/+51
Use the new phy-da8xx-usb driver to take the place of the mach code that pokes CFGCHIP2 in the da8xx musb glue driver. This unbreaks the driver. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13usb: musb: da8xx: Use devm in probeDavid Lechner1-14/+5
Simplify things a bit by using devm functions where possible. Signed-off-by: David Lechner <david@lechnology.com> [b-liu@ti.com: fixed merge conflict] Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>