| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 71132cedd1ecbc4032d76e9928c18a10f7e39b80 ]
uea_probe() distinguishes a pre-firmware device from a post-firmware one
using the USB id (UEA_IS_PREFIRM()), and stores a different object as the
interface data in each case: a 'struct completion' for a pre-firmware
device (to be waited on in .disconnect()), or a 'struct usbatm_data' for a
post-firmware one.
uea_disconnect() instead tells the two apart by the number of interfaces
of the active configuration (a pre-firmware device exposes a single
interface, ADI930 has 2 and eagle has 3), and casts the interface data
accordingly.
Because the two handlers use different criteria, a crafted device that
advertises a pre-firmware id together with a multi-interface descriptor
(or a post-firmware id with a single interface) makes them disagree: the
small 'struct completion' stored by uea_probe() is then passed to
usbatm_usb_disconnect(), which casts it to 'struct usbatm_data' and takes
instance->serialize, reading past the end of the allocation:
BUG: KASAN: slab-out-of-bounds in __mutex_lock+0x152a/0x1b80
Read of size 8 at addr ffff8880470e2c60 by task kworker/1:2/982
...
__mutex_lock+0x152a/0x1b80
usbatm_usb_disconnect+0x70/0x820
uea_disconnect+0x133/0x2c0
usb_unbind_interface+0x1dd/0x9e0
...
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes to the right of
allocated 96-byte region [ffff8880470e2c00, ffff8880470e2c60)
Reject such inconsistent descriptors in uea_probe() so that both handlers
always make the same pre/post-firmware decision.
Reported-by: syzbot+e62a973f8322b3bbe3ac@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e62a973f8322b3bbe3ac
Fixes: e2674dfbed8a ("usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect()")
Signed-off-by: Diego Fernando Mancera Gomez <diegomancera.dev@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260717080704.1264-1-diegomancera.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1fc50f1ecde39feb4fccdaf4bc71aa6c0eb25c49 upstream.
The VIA VL805/806 xHCI controller advertises AC64, but fails to handle
DMA addresses at or above 0x1000000000. On systems with large amounts of
RAM, this can cause USB device failures when the controller is given DMA
addresses beyond its usable address width.
Do not use XHCI_NO_64BIT_SUPPORT for this controller. That quirk clears
the cached AC64 capability and limits DMA to 32 bits, causing unnecessary
bouncing for addresses between 4GiB and 64GiB and hiding the controller's
real AC64 capability from code that may need to distinguish register
access width from usable DMA address width.
Track the usable DMA address width separately from the AC64 capability.
Initialize the generic xhci->dma_mask_bits field to 64 and let PCI quirks
reduce it for controllers with narrower DMA support. Set VIA VL805/806 to
36 bits so the DMA API only hands it addresses in the range it can handle
while keeping HCCPARAMS1.AC64 visible.
Cc: stable@kernel.org
Signed-off-by: Xincheng Zhang <zhangxincheng@ultrarisc.com>
Link: https://patch.msgid.link/20260630-xhci-via-dma-fix-v3-1-690dcb8cf75a@ultrarisc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f1aa17f72f9b9589bd724dc826c5b17d164193d1 upstream.
Extend the duplicate altmode detection to ucsi_register_altmodes_nvidia()
which is used when a driver provides the update_altmodes() callback.
This ensures all drivers benefit from duplicate detection, whether they
use the standard registration path or the nvidia path with update_altmodes
callback.
Without this fix, drivers using the nvidia path (like yoga_c630) would
still encounter duplicate altmode registration errors from buggy firmware.
Fixes: a79f16efcd00 ("usb: typec: ucsi: Add support for the partner USB Modes")
Cc: stable <stable@kernel.org>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://patch.msgid.link/20260713084323.287516-2-acelan.kao@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 67c92c6419ea6dbc5b1f3e9691aecea956e3e81c upstream.
Some firmware implementations incorrectly return the same altmode
multiple times at different offsets when queried via
UCSI_GET_ALTERNATE_MODES. This causes sysfs duplicate filename errors
and kernel call traces when the driver attempts to register the same
altmode twice:
sysfs: cannot create duplicate filename '/devices/.../typec/port0/port0.0/partner'
typec-thunderbolt port0-partner.1: failed to create symlinks
typec-thunderbolt port0-partner.1: probe with driver typec-thunderbolt failed with error -17
The matching rules differ by recipient:
- UCSI_RECIPIENT_CON (port) and UCSI_RECIPIENT_SOP_P (plug):
Two altmodes with identical SVID and VDO are byte-for-byte
duplicates and the second has no observable function, so drop it.
- UCSI_RECIPIENT_SOP (partner):
The typec class binds each partner altmode to a port altmode of
the same SVID via altmode_match()/device_find_child(), which
returns the first port altmode with a matching SVID. If the
partner advertises more altmodes for SVID X than the port
advertises, the surplus partner altmode(s) collapse onto an
already-paired port altmode and trigger the
"duplicate filename .../partner" sysfs error during
typec_altmode_create_links(). Use the port-side altmode count for
SVID X as the authoritative cap and reject any partner altmode
that would exceed it. This preserves legitimate multi-Mode
partner altmodes (vendor SVIDs that the port really does
advertise more than once) while filtering the firmware-generated
duplicates that have no port counterpart, and is therefore
stricter than a plain SVID+VDO comparison (which still admits the
Thunderbolt case where firmware reports the same SVID twice with
different VDOs) without being over-broad like a plain SVID match
(which would falsely drop legitimate vendor multi-Mode entries).
If a duplicate is detected, skip it and emit a clean warning instead
of generating a kernel call trace:
ucsi_acpi USBC000:00: con2: Firmware bug: duplicate partner altmode SVID 0x8087 at offset 1, ignoring.
ucsi_acpi USBC000:00: con2: VDO mismatch: 0x8087a043 vs 0x00000001
The duplicate detection logic lives in a reusable helper
ucsi_altmode_is_duplicate() and is invoked from
ucsi_register_altmodes(). It applies to all three recipient types:
partner (SOP), port (CON), and plug (SOP_P) altmodes.
Fixes: a79f16efcd00 ("usb: typec: ucsi: Add support for the partner USB Modes")
Cc: stable <stable@kernel.org>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
unchanged: still SVID+VDO exact-dup match.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260713084323.287516-1-acelan.kao@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55645e4f3c6022ffb160ad3617d2b624eaa38501 upstream.
Add support for the TDTECH MT5710-CN (5G redcap) module based on the
Huawei HiSilicon Balong chip.
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=3466 ProdID=3301 Rev=ff.ff
S: Manufacturer=TD Tech Ltd.
S: Product=TDTECH MT571X
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr= 0mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0d Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=cdc_ncm
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1c Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Interface: ECM / NCM + DIAG + AT + SERIAL + GPS
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 42a97c0480f96a2977e6d51ce512adc780f1ef5d upstream.
Killing the interrupt-in urb when the line disciple requests throttling
may lead to data loss if an ongoing transfer is cancelled.
Instead set a flag to prevent the completion handler from resubmitting
the urb until the port is unthrottled.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit faaddd811c5099f11a5f52e68a6b31a5898cda4f upstream.
The interrupt-status packet reports transmit credits returned by the
device. edge_interrupt_callback() adds the 16-bit value to txCredits
without checking maxTxCredits.
edge_write() uses txCredits minus the software FIFO count as the amount
of data that fits. Since the FIFO is allocated with maxTxCredits bytes,
txCredits exceeding maxTxCredits can cause OOB write in ring buffer.
Cap accumulated credits at maxTxCredits. Conforming devices should never
hit the cap.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Assisted-by: Codex:GPT-5
Signed-off-by: Sunho Park <shpark061104@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fad0fd120e29041b3e6cdf41bb12e3184fb524a2 upstream.
The Commubox FXA291 by Endress+Hauser AG is a USB serial converter
based on FT232B which is used to communicate with field devices.
It enumerates using the FTDI vendor ID and a custom PID.
usb 1-9: New USB device found, idVendor=0403, idProduct=e510, bcdDevice= 4.00
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: FXA291
usb 1-9: Manufacturer: Endress+Hauser
usb 1-9: SerialNumber: 00000000
ftdi_sio 1-9:1.0: FTDI USB Serial Device converter detected
usb 1-9: Detected FT232B
usb 1-9: FTDI USB Serial Device converter now attached to ttyUSB0
Signed-off-by: Tim Pambor <timpambor@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b70dc75e85ba968b7b76eebfe5d63000080b875b upstream.
uvc_send_response() builds the UVC control response from a user-supplied
struct uvc_request_data:
req->length = min_t(unsigned int, uvc->event_length, data->length);
...
memcpy(req->buf, data->data, req->length);
req->length is clamped to uvc->event_length, which is taken from the
host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to
data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is
only checked for being negative. The source buffer data->data is only
60 bytes, so a response with uvc->event_length and data->length both
greater than 60 makes memcpy() read past the end of data->data.
Clamp req->length to sizeof(data->data) as well.
Fixes: a5eaaa1f33e7 ("usb: gadget: uvc: use capped length value")
Cc: stable <stable@kernel.org>
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260629195004.148405-1-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0583f2fbf8f86ae3a0ce054f96783dd83e65d9bb upstream.
The Broadcom BDC UDC driver registers its IRQ handler with
devm_request_irq() in bdc_udc_init(), so the IRQ is released by devm
only after bdc_remove() returns. devm releases resources in reverse
LIFO order, but bdc_remove() runs bdc_udc_exit() and bdc_hw_exit() ->
bdc_mem_free() manually before returning: bdc_udc_exit() tears down
individual endpoint objects via bdc_free_ep(), while bdc_hw_exit() ->
bdc_mem_free() frees and NULLs the DMA-coherent status-report ring
(bdc->srr.sr_bds) and kfree()s bdc->bdc_ep_array. Both happen while
the IRQ handler (bdc_udc_interrupt, requested with IRQF_SHARED)
remains deliverable in the window up to the post-remove devm
free_irq().
On receipt of a shared interrupt in that window, bdc_udc_interrupt()
dereferences bdc->srr.sr_bds[bdc->srr.dqp_index] (NULL or freed DMA)
and dispatches sr_handler callbacks that index into bdc_ep_array,
causing a NULL-deref or use-after-free.
The same window affects the delayed_work bdc->func_wake_notify, which is
armed from the IRQ handler via bdc_sr_uspc() -> handle_link_state_change()
-> schedule_delayed_work() and may self-rearm from its own callback
bdc_func_wake_timer(). No cancel exists anywhere in the driver, so a
queued work item that fires after bdc_remove() returns and the bdc
structure is devm-freed dereferences freed memory.
Replace devm_request_irq() with request_irq() and add an explicit
free_irq(bdc->irq, bdc) in bdc_remove(). Clear BDC_GIE before
free_irq() to stop the device from asserting interrupts, then
free_irq() drains any in-flight handler, then cancel_delayed_work_sync()
drains the func_wake_notify delayed work. This ordering ensures the
IRQ handler and delayed work cannot interfere with the subsequent
endpoint and DMA teardown in bdc_udc_exit() and bdc_hw_exit(). Wire the
matching free_irq() into the bdc_udc_init() error path so the IRQ is
released on probe failure, and route the bdc_init_ep() failure through
err0 instead of returning directly.
This issue was found by an in-house static analysis tool.
Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260709020904.502611-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79e2d75725c85607f8a9d87ae9cace62a19f767d upstream.
The f_tcm set_alt() path defers endpoint setup to a work item and
completes the delayed status response from process context. The delayed
work uses f_tcm private state and may complete the setup request after
disconnect or function teardown has already moved on.
Cancel and drain the delayed set_alt work when the function is unbound or
freed. For disable paths, which are reached under the composite device
lock, use a small state machine and a non-sleeping cancellation path
instead of cancel_work_sync(). If the work is already running, mark it
cancelled and let the worker own the cleanup; otherwise tcm_disable() can
cancel the queued work and clean up immediately.
Also serialize the final delayed-status completion with the cancellation
check while holding the composite device lock. This prevents a disconnect
from clearing delayed_status while the worker is about to complete the
control request.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? tcm_delayed_set_alt+0x6c/0xef0
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x188/0x320
? tcm_delayed_set_alt+0x6c/0xef0
kasan_report+0xe0/0x110
? tcm_delayed_set_alt+0x6c/0xef0
tcm_delayed_set_alt+0x6c/0xef0
? __pfx_tcm_delayed_set_alt+0x10/0x10
? process_one_work+0x4cb/0xb90
? rcu_is_watching+0x20/0x50
? tcm_delayed_set_alt+0x9/0xef0
process_one_work+0x4d7/0xb90
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_tcm_delayed_set_alt+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 544:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
tcm_alloc+0x68/0x180
usb_get_function+0x36/0x60
config_usb_cfg_link+0x125/0x1b0
configfs_symlink+0x322/0x890
vfs_symlink+0xc2/0x270
filename_symlinkat+0x295/0x2f0
__x64_sys_symlinkat+0x62/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 661:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x2f9/0x530
config_usb_cfg_unlink+0x173/0x1e0
configfs_unlink+0x1fa/0x340
vfs_unlink+0x15c/0x510
filename_unlinkat+0x2ba/0x450
__x64_sys_unlinkat+0x63/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260627104153.3822495-1-zzzccc427@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1febec7e47cdcd01f43fb0211094e3010474666e upstream.
When unpacking host-supplied NTBs, ncm_unwrap_ntb() checks datagram length
against frame_max but does not verify that the datagram fits within the
declared block length. Additionally, when decoding multiple NTBs from a
single socket buffer, subsequent block lengths are not checked against the
actual remaining buffer data.
With these checks missing, a malicious USB host can specify datagram
offsets and lengths that point beyond the block, or supply secondary NTB
headers declaring lengths larger than the buffer. skb_put_data() then
copies adjacent kernel memory from skb_shared_info into the network skb.
Fix this by verifying that sufficient buffer space remains for the NTB
header before parsing, handling zero-length block declarations, ensuring
that block lengths never exceed the remaining buffer space, and verifying
that each datagram payload stays strictly within the block boundary.
Fixes: 427694cfaafa ("usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call")
Fixes: 2b74b0a04d3e ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()")
Cc: stable <stable@kernel.org>
Assisted-by: Jetski:Gemini-2.5-Pro
Signed-off-by: Sonali Pradhan <sonalipradhan@google.com>
Link: https://patch.msgid.link/20260703083725.1903850-1-sonalipradhan@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c4dd150fceab281496acb3a643ae712aacb74864 upstream.
A change replacing custom printk() macros with dev_printk() incorrectly
used the gadget struct device instead of the controller struct device
(including for messages printed before the gadget device name has been
initialised).
Switch to using the controller platform device with dev_printk() so that
the controller device and driver names are included in log messages as
expected.
Fixes: 6025f20f16c2 ("usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}")
Cc: stable <stable@kernel.org>
Cc: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260702141536.90887-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b874d00c466e73c6448a89856407fe46b2f50e4 upstream.
The gadget device name is set by UDC core when registering the gadget
and must not be set before to avoid leaking the name in intermediate
error paths (e.g. on dma pool creation failure).
Fixes: eab35c4e6d95 ("usb: gadget: fsl_udc_core: let udc-core manage gadget->dev")
Cc: stable <stable@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260702141536.90887-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 29a142d3e8b35ebc9e0bcc78f4bc26c9b6a9ac0b upstream.
The gadget device name is set by UDC core when registering the gadget
and must not be set before to avoid leaking the name in intermediate
error paths (e.g. when detecting an older chip revision).
Fixes: 12ad0fcaf2fb ("usb: gadget: amd5536udc: let udc-core manage gadget->dev")
Cc: stable <stable@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260702141536.90887-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2e819be6a5c7f34344926b4bd7e3dfca58cf48a upstream.
printer_read() uses the same variable for the requested copy size and
the number of bytes actually copied to user space. copy_to_user()
returns the number of bytes not copied, so when it fails to copy
anything, the computed copied length becomes zero.
In that case len, buf, current_rx_bytes and current_rx_buf are left
unchanged. If RX data is available and the user buffer remains
unwritable, the read loop can repeat indefinitely.
Track the copied length separately and return -EFAULT, or the number of
bytes already copied, if an iteration makes no progress.
Fixes: b185f01a9ab7 ("usb: gadget: printer: factor out f_printer")
Cc: stable <stable@kernel.org>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
Link: https://patch.msgid.link/20260709205622.55700-1-mlbnkm1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5650c18d93a1db7e27cb5a40b394747eb4686d5b upstream.
The f_midi driver embeds a work item (midi->work) whose handler,
f_midi_in_work(), dereferences the enclosing struct f_midi through
container_of(). This work is armed from two sites: f_midi_complete(),
on a normal IN-endpoint completion, and f_midi_in_trigger(), on an ALSA
rawmidi output-stream start.
Neither f_midi_disable() nor f_midi_unbind() cancels midi->work.
f_midi_disable() only disables the endpoints and drains the in_req_fifo;
it does not synchronize the work item, and the sound card is released
asynchronously to the final free of the midi object.
The midi object is reference-counted (midi->free_ref) and is freed in
f_midi_free() only once both the usb_function reference and the rawmidi
private_data reference have been dropped. In f_midi_unbind(),
f_midi_disable() runs before the sound card is released, so while the
USB endpoints are already disabled the rawmidi device is still usable by
an open substream. A concurrent userspace write on such a substream can
reach f_midi_in_trigger() and queue midi->work again after
f_midi_disable() has returned. A work item armed this way may still be
pending when the last reference drops and f_midi_free() proceeds to
kfree(midi), letting f_midi_in_work() dereference the struct after it
has been freed, a use-after-free.
For this reason cancelling midi->work in f_midi_disable() would not be
sufficient: the ALSA trigger path can rearm the work after disable()
returns. Cancelling at the refcount-zero free site is the boundary
after which neither arming source can survive, because by then both
references that keep the midi object alive have been dropped: the USB
endpoints are already disabled and the rawmidi device has been released.
Fix this by calling cancel_work_sync(&midi->work) in the refcount-zero
block of f_midi_free(), before the embedded work_struct is freed along
with the rest of the structure. opts->lock is a sleeping mutex, so
calling cancel_work_sync() under it is permitted, and the handler takes
midi->transmit_lock rather than opts->lock, so no self-deadlock can
occur while it waits for a running instance of the work to finish.
This issue was found by an in-house static analysis tool.
Fixes: 8653d71ce3763 ("usb/gadget: f_midi: Replace tasklet with work")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260709150717.399083-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d5e5cd3654d2b5359a12ea6586120f05b28634ee upstream.
dummy_hcd embeds a single shared usb_request (dum->fifo_req) that the
"emulated single-request FIFO" fast-path in dummy_queue() reuses for
small IN transfers: it copies the caller's request into it
(req->req = *_req) and queues it, treating list_empty(&fifo_req.queue)
as "the slot is free".
The completion side (dummy_timer/transfer/nuke/dummy_dequeue) follows
the standard pattern: list_del_init(&req->queue) unlinks the request,
then the lock is dropped and usb_gadget_giveback_request() invokes
req->complete(). But list_del_init() makes fifo_req.queue look empty
*before* the completion callback returns, so a concurrent dummy_queue()
on another CPU sees the slot as free, reuses fifo_req and runs
req->req = *_req -- overwriting req->complete while dummy_timer is
mid-calling it. The indirect call then jumps to a clobbered pointer,
causing a general protection fault / page fault in dummy_timer
(syzkaller extid faf3a6cf579fc65591ca). The clobbering write is an
in-bounds memcpy on a live shared object, so KASAN cannot flag it.
Add a fifo_req_busy bit covering the shared request's whole lifetime:
set it in dummy_queue() when the FIFO fast-path takes fifo_req (making
it the fast-path guard, replacing the list_empty(&fifo_req.queue)
test), and clear it after the completion callback has returned, via a
dummy_giveback() helper used at all four gadget-request giveback
sites. The shared slot can no longer be reused until its completion
callback has finished.
Reported-by: syzbot+faf3a6cf579fc65591ca@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=faf3a6cf579fc65591ca
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@kernel.org>
Signed-off-by: Jinchao Wang <wangjinchao600@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/5db8bba5b3499a86cd2e776f9918126b68b2508b.1784198306.git.wangjinchao600@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc3afb5728e297994863f8a2a01b88a920bbf53e upstream.
The probe() calls pm_runtime_use_autosuspend(), but remove() does not call
pm_runtime_dont_use_autosuspend(). This can lead to a usage_count leak if
autosuspend_delay is set to a negative value.
The pm_runtime_use_autosuspend() also notes that it's important to undo
this with pm_runtime_dont_use_autosuspend() at driver exit time.
Fixes: 1f874edcb731 ("usb: chipidea: add runtime power management support")
Cc: stable <stable@kernel.org>
Assisted-by: Claude:claude-sonnet-4.6
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260716104126.2763454-1-xu.yang_2@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3b4ca2e01c1dd8c00b675b794732945f460a471b upstream.
The Longmai Technologies USB Key (0x04b4:0xb708) advertises itself as a
SCSI/Bulk-only mass storage device but does not correctly handle ATA
pass-through commands. When such a command (ATA_12 or ATA_16) is sent to
the device it fails to respond and the transfer eventually times out,
leaving the device unusable.
Add an unusual_devs entry for this device that sets the US_FL_NO_ATA_1X
flag, so usb-storage short-circuits ATA pass-through commands and returns
INVALID COMMAND OPERATION CODE (0x20 0x05 0x24 0x00) instead of forwarding
them to the device.
Information about the device in /sys/kernel/debug/usb/devices:
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 12 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=06 Prot=50 MxPS=64 #Cfgs= 1
P: Vendor=04b4 ProdID=b708 Rev= 1.00
S: Manufacturer=Longmai Technologies
S: Product=USB Key
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Reported-by: Ai Chao <aichao@kylinos.cn>
Cc: stable <stable@kernel.org>
Signed-off-by: Huang Wei <huangwei@kylinos.cn>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260716033341.2830872-1-huangwei@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c947360ae63eee1c9eacc030dd6f5a53f717addf upstream.
omap2430_probe() stores pdev->dev.of_node in a local np variable. This is
a borrowed pointer and the probe function does not take a reference to
it.
The success and error paths nevertheless call of_node_put(np). This drops
a reference that is owned by the platform device, and can leave
pdev->dev.of_node with an unbalanced reference count.
Do not put the borrowed platform device node from omap2430_probe().
References taken for the child MUSB device are handled by the device core,
and the ctrl-module phandle reference is still released separately.
Fixes: ffbe2feac59b ("usb: musb: omap2430: Fix probe regression for missing resources")
Cc: stable <stable@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260713114711.955253-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e0b291fe117964037e0ba382eff4bb365d531c3a upstream.
connector_unbind() is the mirror of connector_bind(), but it is missing
the symmetric call to typec_deattach() that connector_bind() makes via:
if (port_dev->child)
typec_attach(port_dev->connector, &port_dev->child->dev);
When a Thunderbolt dock is unplugged, two teardown paths race:
1. The component framework calls connector_unbind() first, which sets
port_dev->connector = NULL without calling typec_deattach(). This
leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at
the USB device that is about to be freed.
2. usb_disconnect() then calls typec_deattach(port_dev->connector, ...),
but port_dev->connector is already NULL, so the call is a no-op and
port->usb2_dev is never cleared.
3. Concurrently, UCSI detects a PD partner-disconnect event and calls
typec_unregister_partner(), which reads port->usb2_dev (now a dangling
pointer to freed memory) and passes it to typec_partner_unlink_device()
-> sysfs_remove_link() -> dev_name() on the freed device, corrupting
the typec/UCSI partner state.
This corruption leaves the Thunderbolt tunnel in an inconsistent state on
the next dock hot-plug. On affected hardware the dock's I225/igc NIC fails
to enumerate: AER fires a slot reset while the igc driver is still
initialising ("PCIe link lost"), and the subsequent igc_reset attempt hits
igc_rd32 on an already-detached device:
igc 0000:2e:00.0 eth0: PCIe link lost, device now detached
igc: Failed to read reg 0x0!
WARNING: CPU: 9 PID: 129 at drivers/net/ethernet/intel/igc/igc_main.c:7005
igc_rd32+0xa4/0xc0 [igc]
Call Trace:
igc_disable_pcie_master+0x16/0xa0 [igc]
igc_reset_hw_base+0x14/0x170 [igc]
igc_reset+0x63/0x110 [igc]
igc_io_slot_reset+0x9e/0xd0 [igc]
report_slot_reset+0x5d/0xc0
pcie_do_recovery+0x209/0x400
aer_isr_one_error_type+0x235/0x430
aer_isr+0x4e/0x80
irq_thread+0xf4/0x1f0
4. UCSI later handles the PD partner-disconnect and calls
typec_unregister_partner(), which still sees the stale port->usb2_dev
and tries to remove its sysfs link a second time:
kernfs: can not remove 'typec', no directory
WARNING: CPU: 6 PID: 55 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0xe9/0xf0
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call Trace:
sysfs_remove_link+0x19/0x50
typec_unregister_partner+0x6e/0x120 [typec]
ucsi_unregister_partner+0x107/0x150 [typec_ucsi]
ucsi_handle_connector_change+0x3ec/0x490 [typec_ucsi]
process_one_work+0x18e/0x3e0
worker_thread+0x2e3/0x420
kthread+0x10a/0x230
ret_from_fork+0x121/0x140
ret_from_fork_asm+0x1a/0x30
With worse timing the same stale pointer is dereferenced after the
backing memory is freed, turning the warning into a use-after-free.
Fix the asymmetry: call typec_deattach() before clearing
port_dev->connector, matching what connector_bind() does on the bind side.
typec_partner_deattach() is already protected by port->partner_link_lock,
so it serialises safely with the concurrent typec_unregister_partner() path.
Fixes: 11110783f5ea ("usb: Inform the USB Type-C class about enumerated devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260611071201.1235545-1-acelan.kao@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4e0197fbb0eec588795d5431716a244d9ac8fa93 upstream.
Add a lock to the function bos_descriptors_read().
This function accesses udev->bos, which could be simultaneously freed in
usb_reset_and_verify_device(), a function that is commonly called in
drivers all over the kernel.
Assisted-by: gkh_clanker_t1000
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260715-usb_core_patches_3-v1-1-53021f5576fd@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e2674dfbed8a30d57e2bc872c4bfa6c3eec918bf ]
ueagle-atm uses the asynchronous request_firmware_nowait() in .probe(),
but does not wait for its completion, not even in .disconnect(); so, if the
device is unplugged meanwhile, its teardown runs concurrently with that.
Even though this inconsistency is worth addressing on its own, it has also
triggered several bug reports in syzbot over the years (some auto-closed)
where the firmware sysfs fallback mechanism (CONFIG_FW_LOADER_USER_HELPER)
creates a firmware subdirectory in the device directory during its removal,
which might hit unexpected conditions in kernfs, apparently, depending at
which point the add and remove operations raced. (See links.)
The pattern is:
usb ?-?: Direct firmware load for ueagle-atm/eagle?.fw failed with error -2
usb ?-?: Falling back to sysfs fallback for: ueagle-atm/eagle?.fw
<ERROR>
Call trace:
...
kernfs_create_dir_ns
sysfs_create_dir_ns
create_dir
kobject_add_internal
kobject_add_varg
kobject_add
class_dir_create_and_add
get_device_parent
device_add
fw_load_sysfs_fallback
fw_load_from_user_helper
firmware_fallback_sysfs
_request_firmware
request_firmware_work_func
...
(Some variations are observed, after fw_load_sysfs_fallback(), e.g., [1].)
While the kernfs side is being looked at, the ueagle-atm side can be fixed
by waiting for the pre-firmware load in the .disconnect() handler.
This change has a similar approach to previous work by Andrey Tsygunka [2]
(wait_for_completion() in .disconnect()), but it is relatively different in
design/implementation; using the Originally-by tag for credit assignment.
This has been tested with:
- synthetic reproducer to check the error path;
- USB gadget (virtual device) to check the firmware upload path;
- QEMU device emulator to check the device ID re-enumeration path;
(The latter two were written by Claude; no other code/text in this commit.)
Links (year first reported):
2025 https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d
2025 https://syzbot.org/bug?extid=9af8471255ac36e34fd4
2024 https://syzbot.org/bug?extid=306212936b13e520679d
2023 https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
2022 https://syzbot.org/bug?extid=782984d6f1701b526edb
2021 https://syzbot.org/bug?id=f3f221579f4ef7e9691281f3c6f56c05f83e8490
2021 https://syzbot.org/bug?id=84d86f0d71394829df6fc53daf6642c045983881
2021 https://syzbot.org/bug?id=3302dc1c0e2b9c94f2e8edb404eabc9267bc6f90
[1] https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
[2] https://lore.kernel.org/lkml/20250410093146.3776801-2-aitsygunka@yandex.ru/
Cc: stable <stable@kernel.org>
Reported-by: syzbot+ce1e5a1b4e086b43e56d@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d
Reported-by: syzbot+306212936b13e520679d@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=306212936b13e520679d
Reported-by: syzbot+457452d30bcdda75ead2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2
Originally-by: Andrey Tsygunka <aitsygunka@yandex.ru>
Fixes: b72458a80c75 ("[PATCH] USB: Eagle and ADI 930 usb adsl modem driver")
Assisted-by: Claude:claude-opus-4.7 # usb gadget & qemu device for testing
Signed-off-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260526-ueagle-atm_req-fw-sync-v3-1-93c01961daaf@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1414b2242c2e9d670c4d8b83480f13db57627ba9 ]
Remove the driver-internal function entry/exit debug messages
in favor of existing kernel-level function tracing mechanisms.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/2026051657-scruffy-embark-45ea@gregkh/
Signed-off-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260520-ueagle-atm-cleanup-v1-2-010c8bc7b214@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: e2674dfbed8a ("usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 05c5075c3115010f97434c53d353d9a0d4b0e64e ]
Convert dev_info() to dev_dbg().
Per 'Documentation/process/coding-style.rst':
13) Printing kernel messages
... When drivers are working properly they are quiet,
so prefer to use dev_dbg/pr_debug unless something is wrong.
While in there, correct the verb form and add 'with' for clarity.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/2026051628-squatter-stature-c0e0@gregkh/
Signed-off-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260520-ueagle-atm-cleanup-v1-1-010c8bc7b214@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: e2674dfbed8a ("usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 11b5c101e2fd206104b05bc92554d356989423a8 ]
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. The `GetPortStatus` case correctly rejects
requests with `index != 1`, since the virtual root hub has only a
single port. However, the `ClearPortFeature` and `SetPortFeature`
cases lack the same check.
Fix this by extending the `index != 1` rejection to both cases,
matching the existing behavior of `GetPortStatus`.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://patch.msgid.link/20260518224901.1887013-3-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cff06b03b530ae1fe8a13e93a7848f2130e00fb4 ]
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. In the `default` branches of both the
`ClearPortFeature` and `SetPortFeature` switch statements, it modifies
`max3421_hcd->port_status` by left shifting 1 by the request's `value`
parameter. However, it does not validate whether this shift will exceed
the width of `port_status`.
So if a malicious userspace task with access to the root hub via
/dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue`
greater than or equal to 32, the left shift operation invokes
shift-out-of-bounds undefined behavior. This results in arbitrary
bit corruption of `port_status`, including the normally-immutable
change bits, which can bypass internal state checks and confuse the
hub status.
Fix this by rejecting requests whose `value` exceeds the shift width
before performing the shift.
This issue was found using a KLEE-based symbolic execution tool for
kernel drivers that I'm currently developing.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://patch.msgid.link/20260518224901.1887013-1-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8bdcf96eb135aebacac319667f87db034fb38406 upstream.
Currently, ffs_epfile_release unconditionally frees the endpoint's
read_buffer when a file descriptor is closed. If userspace explicitly
opens the endpoint multiple times and closes one, the read_buffer is
destroyed. This can lead to silent data loss if other file descriptors
are still actively reading from the endpoint.
By tying the lifetime of the read_buffer to the ffs_epfile structure itself
(which is destroyed when the functionfs instance is torn down in
ffs_epfiles_destroy), we eliminate the brittle dependency on open/release
calls while correctly matching the conceptual lifetime of unread data on
the hardware endpoint.
Fixes: 9353afbbfa7b ("usb: gadget: f_fs: buffer data from ‘oversized’ OUT requests")
Cc: stable <stable@kernel.org>
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Neill Kapron <nkapron@google.com>
Link: https://patch.msgid.link/20260619040609.4010746-3-nkapron@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 82cfd4739011bdc7e87b5d585703427e89ddfaa5 upstream.
When parsing endpoint descriptors, ffs_data_got_descs() generates the
eps_addrmap which contains the endpoint direction. However, epfile->in
was previously only populated in ffs_func_eps_enable() which executes
upon USB host connection. As a result, early userspace ioctls like
FUNCTIONFS_DMABUF_ATTACH that run before the host connects would see
epfile->in as 0, leading to incorrect DMA directions.
By moving the initialization to ffs_epfiles_create(), epfile->in is
accurate before userspace opens the endpoint files.
Fixes: 7b07a2a7ca02 ("usb: gadget: functionfs: Add DMABUF import interface")
Cc: stable <stable@kernel.org>
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Neill Kapron <nkapron@google.com>
Link: https://patch.msgid.link/20260619040609.4010746-2-nkapron@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit baa6b6068a3f2bf2ed525a1cb37975905dadc658 upstream.
In ffs_dmabuf_transfer(), a ffs_dma_fence object is kmalloc'd, with the
underlying dma_fence later initialized by dma_fence_init(), which sets
its kref counter to 1. Then, dma_resv_add_fence() gets a second
reference, and a pointer to the ffs_dma_fence is passed as the
usb_request's "context" field.
The dma-resv mechanism will manage the second reference, but the first
reference is never properly released; the ffs_dmabuf_cleanup() function
decreases the reference count, but only to balance with the reference
grab in ffs_dmabuf_signal_done().
The code will then slowly leak memory as more ffs_dma_fence objects are
created without being ever freed.
Address this issue by transferring ownership of the fence to the DMA
reservation object, by calling dma_fence_put() right after
dma_resv_add_fence(). The ffs_dma_fence then gets properly discarded
after being signalled.
Fixes: 7b07a2a7ca02 ("usb: gadget: functionfs: Add DMABUF import interface")
Cc: stable <stable@kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260609152905.729328-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3137b243c93982fe3460335e12f9247739766e10 upstream.
ffs_fs_kill_sb() unconditionally calls cancel_work_sync() on
ffs->reset_work when a functionfs instance is unmounted:
ffs_data_reset(ffs);
cancel_work_sync(&ffs->reset_work);
However ffs->reset_work is only ever initialized via INIT_WORK() in
ffs_func_set_alt() and ffs_func_disable(), and only on the
FFS_DEACTIVATED path. That state is reached solely by ffs_data_closed()
when the instance is mounted with the "no_disconnect" option, so for the
common case (no "no_disconnect", or mounted and unmounted without ever
being deactivated) reset_work is never initialized.
ffs_data_new() allocates the ffs_data with kzalloc_obj() and does not
initialize reset_work, and ffs_data_reset()/ffs_data_clear() do not touch
it either, so reset_work.func is left NULL. cancel_work_sync() on such a
work then trips the WARN_ON(!work->func) guard in __flush_work():
WARNING: kernel/workqueue.c:4301 at __flush_work+0x330/0x360, CPU#3: umount
Call trace:
__flush_work
cancel_work_sync
ffs_fs_kill_sb [usb_f_fs]
deactivate_locked_super
deactivate_super
cleanup_mnt
__cleanup_mnt
task_work_run
exit_to_user_mode_loop
el0_svc
On older kernels cancel_work_sync() on a zero-initialized work struct was
a silent no-op, which hid the missing initialization.
Initialize reset_work once in ffs_data_new() so it is always valid for
the lifetime of the ffs_data, and drop the now-redundant INIT_WORK()
calls from the two deactivation paths.
Fixes: 18d6b32fca38 ("usb: gadget: f_fs: add "no_disconnect" mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Tyler Baker <tyler.baker@oss.qualcomm.com>
Cc: Loic Poulain <loic.poulain@oss.qualcomm.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Link: https://patch.msgid.link/20260609193635.2284430-1-tyler.baker@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7c4a234bd31a64a8dbd0140dc812da592c5e0787 upstream.
On a Dell XPS 13 9360 (BIOS 2.21.0), entering system suspend (deep/S3)
races a pending UCSI connector-change worker against the ACPI EC teardown.
The worker evaluates the UCSI _DSM (GET_CONNECTOR_STATUS), whose AML
accesses the Embedded Controller. By that point the ACPI EC has already
been stopped for suspend, so the EC address space handler rejects the
access with AE_BAD_PARAMETER, aborting the AML and failing the connector
query:
[22314.689495] ACPI: EC: interrupt blocked
[22314.711981] ACPI: PM: Preparing to enter system sleep state S3
[22314.743260] ACPI: EC: event blocked
[22314.743265] ACPI: EC: EC stopped
[22314.743267] ACPI: PM: Saving platform NVS memory
[22314.744241] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20260408/evregion-303)
[22314.744432] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV.ECW1 due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.744673] ACPI Error: Aborting method \ECWB due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.745201] ACPI Error: Aborting method \_SB.UBTC._DSM due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.745394] ACPI: \_SB_.UBTC: failed to evaluate _DSM c298836f-a47c-e411-ad36-631042b5008f rev:1 func:1 (0x1001)
[22314.745414] ucsi_acpi USBC000:00: ucsi_acpi_dsm: failed to evaluate _DSM 1
[22314.745424] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
ucsi_acpi implements a resume callback but no suspend callback, so nothing
cancels the connector-change work before the firmware/EC is torn down.
Add a `ucsi_suspend()` core helper that cancels the pending init and
connector-change work, and wire it into ucsi_acpi's PM ops. The connector
state is re-read on resume by `ucsi_resume()`, so cancelling the work loses
nothing.
Fixes: 4e3a50293c2b ("usb: typec: ucsi: acpi: Implement resume callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Assisted-by: Claude Opus 4.8
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260703110738.8457-2-pmenzel@molgen.mpg.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f0bdc2884b67de337215079bba166df0cdf4ac5 upstream.
The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(),
which on a connector-change event calls ucsi_connector_change() and
schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees
uc->ucsi (kfree) before free_irq() is called, so a handler invocation
already in flight may access the freed object after ucsi_destroy().
CPU 0 (remove) | CPU 1 (threaded IRQ)
ucsi_destroy(uc->ucsi) | ccg_irq_handler()
kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE
Move free_irq() before ucsi_destroy() in the remove path. It is kept
after ucsi_unregister(): ucsi_unregister() cancels connector work whose
handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(),
which waits for a completion that is signalled from the IRQ handler, so
the IRQ must stay active until that work has been cancelled.
The probe error path already orders free_irq() before ucsi_destroy().
This bug was found by static analysis.
Fixes: e32fd989ac1c ("usb: typec: ucsi: ccg: Move to the new API")
Cc: stable <stable@kernel.org>
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260616132011.103279-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 735a461d060d4eeb2f9732aba1295bc32a3982e2 upstream.
In the UCSI Specification Revision 3.1 RC1, bits 32-63 of the SET_NEW_CAM
command hold the 32-bit Alternate Mode Specific (AMSpecific) field.
For DisplayPort Alternate Mode, this field must contain the full
32-bit DisplayPort configuration VDO payload that the OPM wants the
connector to operate in, rather than just the pin assignment value.
This AMSpecific value follows the DisplayPort Configurations defined
in the DisplayPort Alt Mode on USB Type-C Specification v2.1a,
Table 5-13: SOP DisplayPort Configurations.
Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Madhu M <madhu.m@intel.com>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260619153311.3526083-1-madhu.m@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d092d7edf8faefa3e27b9fc7f0e7904b06c833a2 upstream.
The existing implementation assigned these flags backwards, configuring
the partner's DisplayPort role to match the port's role instead of
complementing it.
This prevents proper configuration during DP altmode activation, often
causing `pin_assignment` to remain 0 in `dp_altmode_configure()` and
resulting in VDM negotiation failures:
[ 583.328246] typec port1.1: VDM 0xff01a150 failed
Additionally, the fix ensures that the `pin_assignment` sysfs attribute
displays the correct values.
Cc: stable <stable@kernel.org>
Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260601142837.3240207-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b681dd5fbf60b24a13c14661e5b7735759fb491 upstream.
In svdm_consume_modes(), the SVID value is read from pmdata->svids using
pmdata->svid_index as an array index without bounds validation:
paltmode->svid = pmdata->svids[pmdata->svid_index];
If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results
in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data
is embedded inside struct tcpm_port, indexing past svids reads into
adjacent fields. In particular:
- At index 16, it reads the altmodes count.
- At index 18 and beyond, it reads into altmode_desc[], which contains
partner-supplied SVDM Discovery Modes VDOs.
By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index
to 20, the partner can force paltmode->svid to be loaded with an arbitrary,
partner- chosen SVID, which is then registered via
typec_partner_register_altmode().
Fix this by validating that pmdata->svid_index is non-negative and strictly
less than pmdata->nsvids before accessing the pmdata->svids array inside
svdm_consume_modes().
Assisted-by: Antigravity:gemini-3.5-flash
Fixes: 4ab8c18d4d67 ("usb: typec: Register a device for every mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260622220803.305750-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9cff680e47632b7723cb19f9c5e63669063c3417 upstream.
VDO() second parameter is VDM type (bit 15): 1 for SVDM, 0 for UVDM.
Using 'vdo ? 2 : 1' corrupts SVID low bit when vdo is non-NULL
(2 << 15 = BIT(16)). Enter Mode is always SVDM, hardcode to 1.
Fixes: 8face9aa57c8 ("usb: typec: Add parameter for the VDO to typec_altmode_enter()")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260604105059.18750-1-andyshrk@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b229b22b0a945d52dee887c856991ad08744d08e upstream.
Commit 6bebd9b77726 ("usb: typec: ps883x: Rework ps883x_set()") introduced
two regressions:
1. The CONN_STATUS_0_USB_3_1_CONNECTED bit is mistakenly written to the
wrong configuration register (cfg1 instead of cfg0). This breaks USB3
when using USB3+DP adapters.
2. The switch-case fallthrough block is inverted: Currently,
TYPEC_DP_STATE_C (DP-only) inherits the USB3 configuration, while
TYPEC_DP_STATE_D (DP+USB3) is missing the necessary DP sink flags.
Fix these by writing the USB3 bit to the correct register and swapping the
case statement order so both states get their correct bits assigned.
Cc: stable <stable@kernel.org>
Fixes: 6bebd9b77726 ("usb: typec: ps883x: Rework ps883x_set()")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260601-ps883x-usb3dp-fixes-v1-1-d19bec3a6d26@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43ae2f90b70cda374c487c1639a01d0f14e5d583 upstream.
usb_power_delivery_find() wraps class_find_device_by_name(). That helper
returns a device reference that must be released by the caller.
select_usb_power_delivery_store() only needs this reference while calling
the pd_set callback. Drop it once the callback returns. Otherwise the sysfs
write can pin the selected USB Power Delivery object and prevent it from
being released on unregister.
Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable <stable@kernel.org>
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Link: https://patch.msgid.link/20260702191329.2648043-1-shuangpeng.kernel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ef7cc27da8b9e315a4a5a665c68c44206f5e559 upstream.
anx7411_i2c_probe() enables runtime PM before returning successfully, but
anx7411_i2c_remove() tears down the Type-C partner state, workqueue, dummy
I2C device, mux, switch and port without disabling runtime PM.
Use devm_pm_runtime_enable() so runtime PM is disabled automatically on
driver detach. Since devres action registration can fail, route that
failure through the existing probe unwind path.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260701114006.75738-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c5371e0b91b24159a3ebaa61e70b0980bcf03c0a upstream.
vep_alloc_request() wasn't initializing vrequest->udc, so cancellations
on the FunctionFS AIO path were arriving in vep_dequeue without a valid
UDC reference.
Since vrequest->udc is never actually properly used anywhere, we opt to
remove it, and update vep_dequeue to obtain a reference to the udc with
ep_to_vudc(), consistent with the other vep_ ops.
AFAICT this bug has existed for ~10 years. Seems that nobody has really
stressed the FunctionFS AIO path on usbip's vudc.
I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints
via AIO. Before the fix, running `usbip attach` from the host would
cause the guest to oops with the following backtrace:
Call trace:
vep_dequeue+0x1c/0xe4 (P)
usb_ep_dequeue+0x14/0x20
ffs_aio_cancel+0x24/0x34
__arm64_sys_io_cancel+0xb0/0x124
do_el0_svc+0x68/0x100
el0_svc+0x18/0x5c
el0t_64_sync_handler+0x98/0xdc
el0t_64_sync+0x154/0x158
Assisted-by: opencode:openai/gpt-5.5
Cc: stable <stable@kernel.org>
Fixes: b6a0ca111867 ("usbip: vudc: Add UDC specific ops")
Reviewed-by: Igor Kotrasinski <i.kotrasinsk@samsung.com>
Signed-off-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20260626-usbip-vudc-deque-fix-v3-1-98c2dc4d6a48@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5fc3f333c001f1e308bbcdeecdec0d054d24338b upstream.
Commit 1892bf90677a ("USB: usb-storage: Fix use of bitfields for
hardware data in ene_ub6250.c") converted the media status fields from
bitfields to bit masks.
The original ene_transport() test called ene_init() only when neither
media type was ready:
!(sd_ready || ms_ready)
The converted test became:
!sd_ready || ms_ready
This is not equivalent. Restore the original semantics by testing that
both ready bits are clear before calling ene_init().
Fixes: 1892bf90677a ("USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/F42641386E32404F+20260626070607.4119527-1-raoxu@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8af6812795869a66e9b26044f455b13deecdb69c upstream.
The allocated device name is never freed on early ULPI device
registration failures.
Fix this by initialising the device structure earlier and releasing the
initial reference whenever registration fails.
Fixes: 289fcff4bcdb ("usb: add bus type for USB ULPI")
Cc: stable <stable@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260608145803.69360-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 24ca1fea8f2753bf33e1d458ec1ae5d9b7796a65 upstream.
The digi_write_inb_command() is supposed to wait for the write urb to
become available or return an error, but instead it updates the transfer
buffer and tries to resubmit the urb on timeout.
To make things worse, for commands like break control where no timeout
is used, the driver would corrupt the urb immediately due to a broken
jiffies comparison (on 32-bit machines this takes five minutes of uptime
to trigger due to INITIAL_JIFFIES).
Fix this by adding the missing return on timeout and waiting
indefinitely when no timeout has been specified as intended.
This issue was (sort of) flagged by Sashiko when reviewing an unrelated
change to the driver.
Link: https://sashiko.dev/#/patchset/20260610132232.356139-1-johan%40kernel.org?part=11
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c1ea24b53bf3bfb859f0a05573997487975da23 upstream.
If submitting the OOB write urb fails persistently (e.g if the device is
being disconnected) the driver would loop indefinitely with interrupts
disabled.
Check for urb submission errors when sending OOB commands to avoid
hanging if, for example, open(), set_termios() or close() races with a
physical disconnect.
This is issue was flagged by Sashiko when reviewing an unrelated change
to the driver.
Link: https://sashiko.dev/#/patchset/20260610132232.356139-1-johan%40kernel.org?part=1
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 83a3dfc018943b05b6daf3a6f891833e1aabfa1f upstream.
If the port is closed while throttled, the read urb is never resubmitted
and the port will not receive any further data until the device is
reconnected (or the driver is rebound).
Clear the throttle flags and submit the urb if needed when opening the
port.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b33ab1dd80f5c1742f49eb6ec7b337c5ffcf3d32 upstream.
Add support for Telit Cinterion FE990D50 compositions:
0x990: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + ADPL + adb
T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=0990 Rev=06.06
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=90b6a3ed
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x991: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + ADPL + adb
T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=0991 Rev=06.06
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=90b6a3ed
C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x992: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + ADPL + adb
T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 12 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=0992 Rev=06.06
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=90b6a3ed
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x993: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + ADPL + adb
T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 15 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=0993 Rev=06.06
S: Manufacturer=Telit Cinterion
S: Product=FE990
S: SerialNumber=90b6a3ed
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6bfc8d01ac4068eced509f8fc74d0cd205e4dcec upstream.
The write() callback is supposed to return the number of characters
accepted or a negative errno. Since the addition of write fifo support
the keyspan_pda implementation will however return the number characters
submitted to the device if the write urb is not already in use. If this
number is larger than the number of characters passed to write(), the
line discipline continues writing data from beyond the tty write buffer.
Fix the information leak by making sure that keyspan_pda_write_start()
returns zero on success as intended.
Fixes: 034e38e8f687 ("USB: serial: keyspan_pda: add write-fifo support")
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0bddda5a11665c210339de76d27ebbd1a2e0b43c upstream.
mtu3_gadget_queue() maps the request before checking whether
the QMU GPD ring can accept another transfer. the request is
returned with -EAGAIN before it is linked on the endpoint
request list if mtu3_prepare_transfer() fails.
Normal completion and dequeue paths unmap requests from
mtu3_req_complete(), but this error path never reaches that
helper, so the DMA mapping is left active. Unmap the request
before returning from the failed queue path.
Fixes: df2069acb005 ("usb: Add MediaTek USB3 DRD driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20260623093325.2105323-1-haoxiang_li2024@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
