| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 9f6a983cfa22ac662c86e60816d3a357d4b551e9 ]
Some USB devices incorrectly report bNumConfigurations as 0 in their
device descriptor, which causes the USB core to reject them during
enumeration.
logs:
usb 1-2: device descriptor read/64, error -71
usb 1-2: no configurations
usb 1-2: can't read configurations, error -22
However, these devices actually work correctly when
treated as having a single configuration.
Add a new quirk USB_QUIRK_FORCE_ONE_CONFIG to handle such devices.
When this quirk is set, assume the device has 1 configuration instead
of failing with -EINVAL.
This quirk is applied to the device with VID:PID 5131:2007 which
exhibits this behavior.
Signed-off-by: Jie Deng <dengjie03@kylinos.cn>
Link: https://patch.msgid.link/20260227084931.1527461-1-dengjie03@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cd644b805da8a253198718741bf363c4c58862ff upstream.
The Fintek F81532A/534A/535/536 family relies on the
F81534A_CTRL_CMD_ENABLE_PORT (116h) register during initialization to
both determine serial port status and control port creation. If the
driver experiences fast load/unload cycles, the device state may becomes
unstable, resulting in the incomplete generation of serial ports.
Performing a dummy read operation on the register prior to the initial
write command resolves the issue. This clears the device's stale internal
state. Subsequent write operations will correctly generate all serial
ports.
This patch also removes the retry loop in f81534a_ctrl_set_register()
because the stale state has been fixed.
Tested on: HygonDM1SLT(Hygon C86 3250 8-core Processor)
Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b275bfaa16be3fb1689fa6794e445ecd127a1b4 upstream.
This reverts commit 1366cd228b0c67b60a2c0c26ef37fe9f7cfedb7f.
The fwnode_usb_role_switch_get() returns NULL only if no connection is
found, returns ERR_PTR(-EPROBE_DEFER) if connection is found but deferred
probe is needed, or a valid pointer of usb_role_switch.
When switching from a NULL check to IS_ERR_OR_NULL(), usb_role_switch_get()
returns NULL and overwrites the ERR_PTR(-EPROBE_DEFER) returned by
fwnode_usb_role_switch_get(). This causes the deferred probe indication to
be lost, preventing the USB role switch from ever being retrieved.
Fixes: 1366cd228b0c ("tcpm: allow looking for role_sw device in the main node")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260309074313.2809867-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec35c1969650e7cb6c8a91020e568ed46e3551b0 upstream.
The network device outlived its parent gadget device during
disconnection, resulting in dangling sysfs links and null pointer
dereference problems.
A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1]
was reverted due to power management ordering concerns and a NO-CARRIER
regression.
A subsequent attempt to defer net_device allocation to bind [2] broke
1:1 mapping between function instance and network device, making it
impossible for configfs to report the resolved interface name. This
results in a regression where the DHCP server fails on pmOS.
Use device_move to reparent the net_device between the gadget device and
/sys/devices/virtual/ across bind/unbind cycles. This preserves the
network interface across USB reconnection, allowing the DHCP server to
retain their binding.
Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use
__free(detach_gadget) macro to undo attachment on bind failure. The
bind_count ensures device_move executes only on the first bind.
[1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/
[2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/
Fixes: 40d133d7f542 ("usb: gadget: f_ncm: convert to new function interface with backward compatibility")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-7-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3131c1aff7cdffb96239f06f98e16188cbc2083f upstream.
This reverts commit e065c6a7e46c2ee9c677fdbf50035323d2de1215.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-6-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 37893bc5de2460c543ec1aa8250c37a305234054 upstream.
This reverts commit 56a512a9b4107079f68701e7d55da8507eb963d9.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-3-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46662d3a1ad40282ba9f753cccc6f909ec4468cc upstream.
This reverts commit 0c0981126b99288ed354d3d414c8a5fd42ac9e25.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-4-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f2524c0e6ff0a5f72f1e1a32441c69d3b56430c4 upstream.
This reverts commit fde0634ad9856b3943a2d1a8cc8de174a63ac840.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-2-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 11199720fac2debbe718aec11e026ab3330dc80d upstream.
This reverts commit 0d6c8144ca4d93253de952a5ea0028c19ed7ab68.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-1-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fde0634ad9856b3943a2d1a8cc8de174a63ac840 upstream.
Commit 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle
with bind/unbind") deferred the allocation of the net_device. This
change leads to a NULL pointer dereference in the legacy NCM driver as
it attempts to access the net_device before it's fully instantiated.
Store the provided qmult, host_addr, and dev_addr into the struct
ncm_opts->net_opts during gncm_bind(). These values will be properly
applied to the net_device when it is allocated and configured later in
the binding process by the NCM function driver.
Fixes: 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable@kernel.org
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202602181727.fd76c561-lkp@intel.com
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260221-legacy-ncm-v2-1-dfb891d76507@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d6c8144ca4d93253de952a5ea0028c19ed7ab68 upstream.
The ncm_set_alt function was holding a mutex to protect against races
with configfs, which invokes the might-sleep function inside an atomic
context.
Remove the struct net_device pointer from the f_ncm_opts structure to
eliminate the contention. The connection state is now managed by a new
boolean flag to preserve the use-after-free fix from
commit 6334b8e4553c ("usb: gadget: f_ncm: Fix UAF ncm object at re-bind
after usb ep transport error").
BUG: sleeping function called from invalid context
Call Trace:
dump_stack_lvl+0x83/0xc0
dump_stack+0x14/0x16
__might_resched+0x389/0x4c0
__might_sleep+0x8e/0x100
...
__mutex_lock+0x6f/0x1740
...
ncm_set_alt+0x209/0xa40
set_config+0x6b6/0xb40
composite_setup+0x734/0x2b40
...
Fixes: 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260221-legacy-ncm-v2-2-dfb891d76507@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9fde507355342a2d64225d582dc8b98ff5ecb19 upstream.
The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically
managed and tied to userspace configuration via ConfigFS. It can be
NULL if the USB host sends requests before the nexus is fully
established or immediately after it is dropped.
Currently, functions like `bot_submit_command()` and the data
transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately
dereference `tv_nexus->tvn_se_sess` without any validation. If a
malicious or misconfigured USB host sends a BOT (Bulk-Only Transport)
command during this race window, it triggers a NULL pointer
dereference, leading to a kernel panic (local DoS).
This exposes an inconsistent API usage within the module, as peer
functions like `usbg_submit_command()` and `bot_send_bad_response()`
correctly implement a NULL check for `tv_nexus` before proceeding.
Fix this by bringing consistency to the nexus handling. Add the
missing `if (!tv_nexus)` checks to the vulnerable BOT command and
request processing paths, aborting the command gracefully with an
error instead of crashing the system.
Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable <stable@kernel.org>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260219023834.17976-1-jiashengjiangcool@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1be3b77de4eb89af8ae2fd6610546be778e25589 upstream.
mdc800_device_read() submits download_urb and waits for completion.
If the timeout fires and the device has not responded, the function
returns without killing the URB, leaving it active.
A subsequent read() resubmits the same URB while it is still
in-flight, triggering the WARN in usb_submit_urb():
"URB submitted while active"
Check the return value of wait_event_timeout() and kill the URB if
it indicates timeout, ensuring the URB is complete before its status
is inspected or the URB is resubmitted.
Similar to
- commit 372c93131998 ("USB: yurex: fix control-URB timeout handling")
- commit b98d5000c505 ("media: rc: iguanair: handle timeouts")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260209151937.2247202-1-n7l8m4@u.northwestern.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 56135c0c60b07729401af9d329fa9c0eded845a6 upstream.
To correctly convert bInterval as interval_duration:
interval_duration = 2^(bInterval-1) * frame_interval
Current code uses a wrong left shift operand, computing 2^bInterval
instead of 2^(bInterval-1).
Fixes: 010dc57cb516 ("usb: gadget: uvc: fix interval_duration calculation")
Cc: stable <stable@kernel.org>
Signed-off-by: Junzhong Pan <panjunzhong@linux.spacemit.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260306-fix-uvc-interval-v1-1-9a2df6859859@linux.spacemit.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d6d260e9a3576256fe9ef6d1f7930c9ec348723 upstream.
If a signal arrives after a read has partially completed,
we need to return the number of bytes read. -EINTR is correct
only if that number is zero.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260209142048.1503791-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7f58b4148ef5d8ee0fb7d8113dcc38ff5374babc upstream.
When adding dynamic configuration for bInterval, the value was removed
from the static SuperSpeed endpoint descriptors but was not set from the
configured value in hidg_bind(). Thus at SuperSpeed the interrupt
endpoints have bInterval as zero which is not valid per the USB
specification.
Add the missing setting for SuperSpeed endpoints.
Fixes: ea34925f5b2ee ("usb: gadget: hid: allow dynamic interval configuration via configfs")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://patch.msgid.link/20260227111540.431521-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3cbc242b88c607f55da3d0d0d336b49bf1e20412 upstream.
In usbhs_remove(), the driver frees resources (including the pipe array)
while the interrupt handler (usbhs_interrupt) is still registered. If an
interrupt fires after usbhs_pipe_remove() but before the driver is fully
unbound, the ISR may access freed memory, causing a use-after-free.
Fix this by calling devm_free_irq() before freeing resources. This ensures
the interrupt handler is both disabled and synchronized (waits for any
running ISR to complete) before usbhs_pipe_remove() is called.
Fixes: f1407d5c6624 ("usb: renesas_usbhs: Add Renesas USBHS common code")
Cc: stable <stable@kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260303073344.34577-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8df672bfe3ec2268c2636584202755898e547173 upstream.
Quoting the bug report:
Due to compiler optimization or CPU out-of-order execution, the
desc->length update can be reordered before the memmove. If this
happens, wdm_read() can see the new length and call copy_to_user() on
uninitialized memory. This also violates LKMM data race rules [1].
Fix it by using WRITE_ONCE and memory barriers.
Fixes: afba937e540c9 ("USB: CDC WDM driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Closes: https://lore.kernel.org/linux-usb/CALbr=LbrUZn_cfp7CfR-7Z5wDTHF96qeuM=3fO2m-q4cDrnC4A@mail.gmail.com/
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260304130116.1721682-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1015c27a5e1a63efae2b18a9901494474b4d1dc3 upstream.
The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in
usbcore allow unlimited timeout durations. And since they use
uninterruptible waits, this leaves open the possibility of hanging a
task for an indefinitely long time, with no way to kill it short of
unplugging the target device.
To prevent this sort of problem, enforce a maximum limit on the length
of these unkillable timeouts. The limit chosen here, somewhat
arbitrarily, is 60 seconds. On many systems (although not all) this
is short enough to avoid triggering the kernel's hung-task detector.
In addition, clear up the ambiguity of negative timeout values by
treating them the same as 0, i.e., using the maximum allowed timeout.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/15fc9773-a007-47b0-a703-df89a8cf83dd@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7784caa413a89487dd14dd5c41db8753483b2acb upstream.
The usbtmc driver accepts timeout values specified by the user in an
ioctl command, and uses these timeouts for some usb_bulk_msg() calls.
Since the user can specify arbitrarily long timeouts and
usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable()
instead to avoid the possibility of the user hanging a kernel thread
indefinitely.
Reported-by: syzbot+25ba18e2c5040447585d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/8e1c7ac5-e076-44b0-84b8-1b34b20f0ae1@suse.com/T/#t
Tested-by: syzbot+25ba18e2c5040447585d@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 048c6d88a021 ("usb: usbtmc: Add ioctls to set/get usb timeout")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/81c6fc24-0607-40f1-8c20-5270dab2fad5@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 416909962e7cdf29fd01ac523c953f37708df93d upstream.
The synchronous message API in usbcore (usb_control_msg(),
usb_bulk_msg(), and so on) uses uninterruptible waits. However,
drivers may call these routines in the context of a user thread, which
means it ought to be possible to at least kill them.
For this reason, introduce a new usb_bulk_msg_killable() function
which behaves the same as usb_bulk_msg() except for using
wait_for_completion_killable_timeout() instead of
wait_for_completion_timeout(). The same can be done later for
usb_control_msg() later on, if it turns out to be needed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/248628b4-cc83-4e81-a620-3ce4e0376d41@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
message
commit e8557acfa079a54b59a21f447c82a31aec7717df upstream.
dp_altmode_configure sets the signaling rate to the current
configuration's rate and then shifts the value to the Select
Configuration bitfield. On the initial configuration, dp->data.conf
is 0 to begin with, so the signaling rate field is never set, which
leads to some DisplayPort Alt Mode partners sending NAK to the
Configure message.
Set the signaling rate to the capabilities supported by both the
port and the port partner. If the cable supports DisplayPort Alt Mode,
then include its capabilities as well.
Fixes: a17fae8fc38e ("usb: typec: Add Displayport Alternate Mode 2.1 Support")
Cc: stable <stable@kernel.org>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260310204106.3939862-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8345b1539faa49fcf9c9439c3cbd97dac6eca171 upstream.
usb_role_switch_is_parent() was walking up to the parent node and checking
for the "usb-role-switch" property regardless of the type of the passed
fwnode. This could cause unrelated device nodes to be probed as potential
role switch parent, leading to spurious matches and "-EPROBE_DEFER" being
returned infinitely.
Till now only Type-B connector node will have a parent node which may
present "usb-role-switch" property and register the role switch device.
For Type-C connector node, its parent node will always be a Type-C chip
device which will never register the role switch device. However, it may
still present a non-boolean "usb-role-switch = <&usb_controller>" property
for historical compatibility.
So restrict the helper to only operate on Type-B connector when attempting
to get the role switch from parent node.
Fixes: 6fadd72943b8 ("usb: roles: get usb-role-switch from parent")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260309074313.2809867-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14ae24cba291bddfdc296bbcbfd00cd09d0498ef upstream.
The CH343 USB/serial adapter is as buggy as it is popular (very).
One of its quirks is that despite being capable of signalling a
BREAK condition, it doesn't advertise it.
This used to work nonetheless until 66aad7d8d3ec5 ("usb: cdc-acm:
return correct error code on unsupported break") applied some
reasonable restrictions, preventing breaks from being emitted on
devices that do not advertise CAP_BRK.
Add a quirk for this particular device, so that breaks can still
be produced on some of my machines attached to my console server.
Fixes: 66aad7d8d3ec5 ("usb: cdc-acm: return correct error code on unsupported break")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable <stable@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260301124440.1192752-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e293015ba76eb96ce4ebed7e3b2cb1a7d319f3e9 upstream.
Remove the error path from the usb_phy_roothub_set_mode() function.
The code is clearly wrong, because phy_set_mode() calls can't be
balanced with phy_power_off() calls.
Additionally, the usb_phy_roothub_set_mode() function is called only
from usb_add_hcd() before it powers on the PHYs, so powering off those
makes no sense anyway.
Presumably, the code is copy-pasted from the phy_power_on() function
without adjusting the error handling.
Cc: stable@vger.kernel.org # v5.1+
Fixes: b97a31348379 ("usb: core: comply to PHY framework")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260218-usb-phy-poweroff-fix-v1-1-66e6831e860e@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 45dba8011efac11a2f360383221b541f5ea53ce5 upstream.
If get_1284_register() fails, the usb device reference count is
incorrect and needs to be properly dropped before returning. That will
happen when the kref is dropped in the call to destroy_priv(), so jump
to that error path instead of returning directly.
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Link: https://patch.msgid.link/2026022342-smokiness-stove-d792@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 17ab4d4078e22be7fd8fd6fc710c15c085a4cb1b upstream.
This patch adds the necessary PCI ID for Intel Nova Lake -H
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260309130204.208661-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a875c09899ba0404844abfd8f0d54cdc481c151 upstream.
The bbu member of the descriptor must be set to the value
standing for uninitialized values before the URB whose
completion handler sets bbu is submitted. Otherwise there is
a window during which probing can overwrite already retrieved
data.
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260209143720.1507500-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d6d5febd12452b7fd951fdd15c3ec262f01901a4 upstream.
The xHCI controller reports a Host Controller Error (HCE) in UAS Storage
Device plug/unplug scenarios on Android devices. HCE is checked in
xhci_irq() function and causes an interrupt storm (since the interrupt
isn’t cleared), leading to severe system-level faults.
When the xHC controller reports HCE in the interrupt handler, the driver
only logs a warning and assumes xHC activity will stop as stated in xHCI
specification. An interrupt storm does however continue on some hosts
even after HCE, and only ceases after manually disabling xHC interrupt
and stopping the controller by calling xhci_halt().
Add xhci_halt() to xhci_irq() function where STS_HCE status is checked,
mirroring the existing error handling pattern used for STS_FATAL errors.
This only fixes the interrupt storm. Proper HCE recovery requires resetting
and re-initializing the xHC.
CC: stable@vger.kernel.org
Signed-off-by: Dayu Jiang <jiangdayu@xiaomi.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260304223639.3882398-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c1c8550e70401159184130a1afc6261db01fc0ce upstream.
xhci_alloc_command() allocates a command structure and, when the
second argument is true, also allocates a completion structure.
Currently, the error handling path in xhci_disable_slot() only frees
the command structure using kfree(), causing the completion structure
to leak.
Use xhci_free_command() instead of kfree(). xhci_free_command() correctly
frees both the command structure and the associated completion structure.
Since the command structure is allocated with zero-initialization,
command->in_ctx is NULL and will not be erroneously freed by
xhci_free_command().
This bug was found using an experimental static analysis tool we are
developing. The tool is based on the LLVM framework and is specifically
designed to detect memory management issues. It is currently under
active development and not yet publicly available, but we plan to
open-source it after our research is published.
The bug was originally detected on v6.13-rc1 using our static analysis
tool, and we have verified that the issue persists in the latest mainline
kernel.
We performed build testing on x86_64 with allyesconfig using GCC=11.4.0.
Since triggering these error paths in xhci_disable_slot() requires specific
hardware conditions or abnormal state, we were unable to construct a test
case to reliably trigger these specific error paths at runtime.
Fixes: 7faac1953ed1 ("xhci: avoid race between disable slot command and host runtime suspend")
CC: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260304223639.3882398-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d0d9b1f4f5391e6a00cee81d73ed2e8f98446d5f upstream.
Add USB_QUIRK_NO_BOS for ezcap401 capture card, without it dmesg will show
"unable to get BOS descriptor or descriptor too short" and "unable to
read config index 0 descriptor/start: -71" errors and device will not
able to work at full speed at 10gbs
Signed-off-by: Vyacheslav Vahnenko <vahnenko2003@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260313123638.20481-1-vahnenko2003@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0326ff28d56b4fa202de36ffc8462a354f383a64 upstream.
Similar to other Huawei LTE modules using this quirk, this version with
another vid/pid suffers from spurious wakeups.
Setting the quirk fixes the issue for this device as well.
Cc: stable <stable@kernel.org>
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260306172817.2098898-1-wse@tuxedocomputers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 93cd0d664661f58f7e7bed7373714ab2ace41734 upstream.
Several USB capture devices also need the USB_QUIRK_NO_BOS set for them
to work properly, odds are they are all the same chip inside, just
different vendor/product ids.
This fixes up:
- ASUS TUF 4K PRO
- Avermedia Live Gamer Ultra 2.1 (GC553G2)
- UGREEN 35871
to now run at full speed (10 Gbps/4K 60 fps mode.)
Link: https://lore.kernel.org/r/CACy+XB-f-51xGpNQFCSm5pE_momTQLu=BaZggHYU1DiDmFX=ug@mail.gmail.com
Cc: stable <stable@kernel.org>
Signed-off-by: A1RM4X <dev@a1rm4x.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
check_command_size_in_blocks()
[ Upstream commit 8479891d1f04a8ce55366fe4ca361ccdb96f02e1 ]
The `check_command_size_in_blocks()` function calculates the data size
in bytes by left shifting `common->data_size_from_cmnd` by the block
size (`common->curlun->blkbits`). However, it does not validate whether
this shift operation will cause an integer overflow.
Initially, the block size is set up in `fsg_lun_open()` , and the
`common->data_size_from_cmnd` is set up in `do_scsi_command()`. During
initialization, there is no integer overflow check for the interaction
between two variables.
So if a malicious USB host sends a SCSI READ or WRITE command
requesting a large amount of data (`common->data_size_from_cmnd`), the
left shift operation can wrap around. This results in a truncated data
size, which can bypass boundary checks and potentially lead to memory
corruption or out-of-bounds accesses.
Fix this by using the check_shl_overflow() macro to safely perform the
shift and catch any overflows.
Fixes: 144974e7f9e3 ("usb: gadget: mass_storage: support multi-luns with different logic block size")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260228104324.1696455-2-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56a512a9b4107079f68701e7d55da8507eb963d9 ]
Currently, the net_device is allocated in ncm_alloc_inst() and freed in
ncm_free_inst(). This ties the network interface's lifetime to the
configuration instance rather than the USB connection (bind/unbind).
This decoupling causes issues when the USB gadget is disconnected where
the underlying gadget device is removed. The net_device can outlive its
parent, leading to dangling sysfs links and NULL pointer dereferences
when accessing the freed gadget device.
Problem 1: NULL pointer dereference on disconnect
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
Call trace:
__pi_strlen+0x14/0x150
rtnl_fill_ifinfo+0x6b4/0x708
rtmsg_ifinfo_build_skb+0xd8/0x13c
rtmsg_ifinfo+0x50/0xa0
__dev_notify_flags+0x4c/0x1f0
dev_change_flags+0x54/0x70
do_setlink+0x390/0xebc
rtnl_newlink+0x7d0/0xac8
rtnetlink_rcv_msg+0x27c/0x410
netlink_rcv_skb+0x134/0x150
rtnetlink_rcv+0x18/0x28
netlink_unicast+0x254/0x3f0
netlink_sendmsg+0x2e0/0x3d4
Problem 2: Dangling sysfs symlinks
console:/ # ls -l /sys/class/net/ncm0
lrwxrwxrwx ... /sys/class/net/ncm0 ->
/sys/devices/platform/.../gadget.0/net/ncm0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/ncm0
ls: .../gadget.0/net/ncm0: No such file or directory
Move the net_device allocation to ncm_bind() and deallocation to
ncm_unbind(). This ensures the network interface exists only when the
gadget function is actually bound to a configuration.
To support pre-bind configuration (e.g., setting interface name or MAC
address via configfs), cache user-provided options in f_ncm_opts
using the gether_opts structure. Apply these cached settings to the
net_device upon creation in ncm_bind().
Preserve the use-after-free fix from commit 6334b8e4553c ("usb: gadget:
f_ncm: Fix UAF ncm object at re-bind after usb ep transport error").
Check opts->net in ncm_set_alt() and ncm_disable() to ensure
gether_disconnect() runs only if a connection was established.
Fixes: 40d133d7f542 ("usb: gadget: f_ncm: convert to new function interface with backward compatibility")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20251230-ncm-refactor-v1-3-793e347bc7a7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0c0981126b99288ed354d3d414c8a5fd42ac9e25 ]
The net_device in the u_ether framework currently requires explicit
calls to unregister and free the device.
Introduce gether_unregister_free_netdev() and the corresponding
auto-cleanup macro. This ensures that if a net_device is registered, it
is properly unregistered and the associated work queue is flushed before
the memory is freed.
This is a preparatory patch to simplify error handling paths in gadget
drivers by removing the need for explicit goto labels for net_device
cleanup.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20251230-ncm-refactor-v1-2-793e347bc7a7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e065c6a7e46c2ee9c677fdbf50035323d2de1215 ]
Currently, the net_device is allocated when the function instance is
created (e.g., in ncm_alloc_inst()). While this allows userspace to
configure the device early, it decouples the net_device lifecycle from
the actual USB connection state (bind/unbind). The goal is to defer
net_device creation to the bind callback to properly align the lifecycle
with its parent gadget device.
However, deferring net_device allocation would prevent userspace from
configuring parameters (like interface name or MAC address) before the
net_device exists.
Introduce a new structure, struct gether_opts, associated with the
usb_function_instance, to cache settings independently of the
net_device. These settings include the interface name pattern, MAC
addresses (device and host), queue multiplier, and address assignment
type.
New helper functions are added:
- gether_setup_opts_default(): Initializes struct gether_opts with
defaults, including random MAC addresses.
- gether_apply_opts(): Applies the cached options from a struct
gether_opts to a valid net_device.
To expose these options to userspace, new configfs macros
(USB_ETHER_OPTS_ITEM and USB_ETHER_OPTS_ATTR_*) are defined in
u_ether_configfs.h. These attributes are part of the function
instance's configfs group.
This refactoring is a preparatory step. It allows the subsequent patch
to safely move the net_device allocation from the instance creation
phase to the bind phase without losing the ability to pre-configure
the interface via configfs.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20251230-ncm-refactor-v1-1-793e347bc7a7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 56a512a9b410 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a52e4f2dff413b58c7200e89bb6540bd995e1269 ]
commit 13b1f8e25bfd1 ("usb: dwc2: Force mode optimizations") removed the
dwc2_force_mode(hsotg, true) in dwc2_force_dr_mode() if dr_mode is host.
But this brings a bug: the controller fails to resume back as host,
further debugging shows that the controller is resumed as peripheral.
The reason is dwc2_force_dr_mode() missed the host mode forcing, and
when resuming from s2ram, GINTSTS is 0 by default, dwc2_is_device_mode
in dwc2_resume() misreads this as the controller is in peripheral mode.
Fix the resume failure by adding back the dwc2_force_mode(hsotg, true).
Then an obvious question is: why this bug hasn't been observed and fixed
for about six years? There are two resons: most dwc2 platforms set the
dr_mode as otg; Some platforms don't have suspend & resume support yet.
Fixes: 13b1f8e25bfd1 ("usb: dwc2: Force mode optimizations")
Cc: stable <stable@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260129021534.10411-1-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54aaa3b387c2f580a99dc86a9cc2eb6dfaf599a7 ]
Currently dwc3_gadget_vbus_draw() can be called from atomic
context, which in turn invokes power-supply-core APIs. And
some these PMIC APIs have operations that may sleep, leading
to kernel panic.
Fix this by moving the vbus_draw into a workqueue context.
Fixes: 99288de36020 ("usb: dwc3: add an alternate path in vbus_draw callback")
Cc: stable <stable@kernel.org>
Tested-by: Samuel Wu <wusamuel@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204054155.3063825-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1132e90840abf3e7db11f1d28199e9fbc0b0e69e ]
The COREPLL_PWRDN bit in the BLCG register must be set when the XUSB
device controller is powergated and cleared when it is unpowergated.
If this bit is not explicitly controlled, the core PLL may remain in an
incorrect power state across suspend/resume or ELPG transitions.
Therefore, update the driver to explicitly control this bit during
powergate transitions.
Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Cc: stable <stable@kernel.org>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://patch.msgid.link/20260123173121.4093902-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef548189fd3f44786fb813af0018cc8b3bbed2b9 ]
We found that calling irq_dispose_mapping() caused a kernel warning
when removing the driver. The IRQs are obtained using
platform_get_irq(), which returns a Linux virtual IRQ number directly
managed by the device core, not by the OF subsystem. Therefore, the
driver should not call irq_dispose_mapping() for these IRQs.
Fixes: 5df186e2ef11 ("usb: xhci: tegra: Support USB wakeup function for Tegra234")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Link: https://patch.msgid.link/20260115103621.587366-1-weichengc@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cea2a1257a3b5ea3e769a445b34af13e6aa5a123 ]
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted).
Signed-off-by: Mario Peter <mario.peter@leica-geosystems.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260108165902.795354-1-mario.peter@leica-geosystems.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e4c1d06183c25022f6b0002a5cab84979ca6337 ]
When ffs_epfile_ioctl handles FUNCTIONFS_DMABUF_* ioctls, it's currently
falling through when copy_from_user fails.
However, this fallthrough isn't being checked properly, so the handler
continues executing further than it should. It then tries the secondary
dispatch where it ultimately gives up and returns -ENOTTY.
The end result is invalid ioctl invocations will yield a -ENOTTY rather
than an -EFAULT.
It's a common pattern elsewhere in the kernel code to directly return
-EFAULT when copy_from_user fails. So we update ffs_epfile_ioctl to do
the same and fix this issue.
Signed-off-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-1-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0145e7acd29855dfba4a2f387d455b5d9a520f0e ]
Currently, DMA_FROM_DEVICE is used when attaching DMABUFs to IN
endpoints and DMA_TO_DEVICE for OUT endpoints. This is inverted from
how it should be.
The result is IOMMU read-only mappings placed on OUT queues,
triggering arm-smmu write faults.
Put differently, OUT endpoints flow data from host -> gadget, meaning
the UDC peripheral needs to have write access to the buffer to fill it
with the incoming data.
This commit flips the directions and updates the implicit-sync helpers
so IN endpoints act as readers and OUT endpoints as writers.
Signed-off-by: Sam Day <me@samcday.com>
Tested-by: David Heidelberg <david@ixit.cz> # OnePlus 6T on sdm845-next-20251119
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-2-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6811e0a08bdce6b2767414caf17fda24c2e4e032 ]
ucsi_psy_get_voltage_max and ucsi_psy_get_current_max are calculated
using whichever pdo is in the last position of the src_pdos array, presuming
it to be a fixed pdo, so the pdo_fixed_voltage or pdo_max_current
helpers are used on that last pdo.
However, non-Fixed PDOs such as Battery PDOs, Augmented PDOs (used for AVS and
for PPS) may exist, and are always at the end of the array if they do.
In the event one of these more advanced chargers are attached the helpers for
fixed return mangled values.
Here's an example case of a Google Pixel Flex Dual Port 67W USB-C Fast Charger
with PPS support:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=13400000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=5790000
POWER_SUPPLY_CURRENT_NOW=3250000
Voltage Max is reading as 13.4V, but that's an incorrect decode of the PPS
APDO in the last position. Same goes for CURRENT_MAX. 5.79A is incorrect.
Instead, enumerate through the src_pdos and filter just for Fixed PDOs for
now, and find the one with the highest voltage and current respectively.
After, from the same charger:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=20000000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=4000000
POWER_SUPPLY_CURRENT_NOW=3250000
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208174918.289394-3-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 87e4b043b98a1d269be0b812f383881abee0ca45 upstream.
If the role change while we are suspended, the cdns3 driver switches to the
new mode during resume. However, switching to host mode in this context
causes a NULL pointer dereference.
The host role's start() operation registers a xhci-hcd device, but its
probe is deferred while we are in the resume path. The host role's resume()
operation assumes the xhci-hcd device is already probed, which is not the
case, leading to the dereference. Since the start() operation of the new
role is already called, the resume operation can be skipped.
So skip the resume operation for the new role if a role switch occurs
during resume. Once the resume sequence is complete, the xhci-hcd device
can be probed in case of host mode.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208
Mem abort info:
...
Data abort info:
...
[0000000000000208] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted
6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT
Hardware name: Texas Instruments J7200 EVM (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usb_hcd_is_primary_hcd+0x0/0x1c
lr : cdns_host_resume+0x24/0x5c
...
Call trace:
usb_hcd_is_primary_hcd+0x0/0x1c (P)
cdns_resume+0x6c/0xbc
cdns3_controller_resume.isra.0+0xe8/0x17c
cdns3_plat_resume+0x18/0x24
platform_pm_resume+0x2c/0x68
dpm_run_callback+0x90/0x248
device_resume+0x100/0x24c
dpm_resume+0x190/0x2ec
dpm_resume_end+0x18/0x34
suspend_devices_and_enter+0x2b0/0xa44
pm_suspend+0x16c/0x5fc
state_store+0x80/0xec
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x130/0x1dc
vfs_write+0x240/0x370
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0x108
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401)
---[ end trace 0000000000000000 ]---
Cc: stable <stable@kernel.org>
Fixes: 2cf2581cd229 ("usb: cdns3: add power lost support for system resume")
Signed-off-by: Thomas Richard (TI) <thomas.richard@bootlin.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260130-usb-cdns3-fix-role-switching-during-resume-v1-1-44c456852b52@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f1195ca3b4bbd001d3f1264dce91f83dec7777f5 ]
bdc_run() can be ran during atomic context leading to a sleep during
atomic warning. Fix this by replacing read_poll_timeout() with
read_poll_timeout_atomic().
Fixes: 75ae051efc9b ("usb: gadget: bdc: use readl_poll_timeout() to simplify code")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260120200754.2488765-1-justin.chen@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c5177144b561dd4037a6a225d444b3604afbfbf2 ]
EXTCON_TCSS_CROS_EC isn't used anywhere else in the kernel tree,
so drop it from this Kconfig file.
(unless it should be EXTCON_USBC_CROS_EC ?)
Fixes: f1a2241778d9 ("usb: typec: ucsi: Implement ChromeOS UCSI driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20251228190604.2484082-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a7fb84ea70aae9a92a842932206e70ed1b3c7007 ]
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Fixes: 309b6341d5570 ("usb: typec: fusb302: Revert incorrect threaded irq fix")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-12-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 509f403f3ccec14188036212118651bf23599396 upstream.
Add the following compositions:
0x10a1: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag)
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a1 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=d128dba9
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10a6: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag)
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a6 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=d128dba9
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10ab: RNDIS + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10ab Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=d128dba9
C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
