summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2023-01-18Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"Ferry Toth1-1/+1
commit b659b613cea2ae39746ca8bd2b69d1985dd9d770 upstream. This reverts commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac. This patch results in some qemu test failures, specifically xilinx-zynq-a9 machine and zynq-zc702 as well as zynq-zed devicetree files, when trying to boot from USB drive. Link: https://lore.kernel.org/lkml/20221220194334.GA942039@roeck-us.net/ Fixes: 8a7b31d545d3 ("usb: ulpi: defer ulpi_register on ulpi_read_id timeout") Cc: stable@vger.kernel.org Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Link: https://lore.kernel.org/r/20221222205302.45761-1-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18usb: ulpi: defer ulpi_register on ulpi_read_id timeoutFerry Toth1-1/+1
[ Upstream commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac ] Since commit 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Dual Role support on Intel Merrifield platform broke due to rearranging the call to dwc3_get_extcon(). It appears to be caused by ulpi_read_id() on the first test write failing with -ETIMEDOUT. Currently ulpi_read_id() expects to discover the phy via DT when the test write fails and returns 0 in that case, even if DT does not provide the phy. As a result usb probe completes without phy. Make ulpi_read_id() return -ETIMEDOUT to its user if the first test write fails. The user should then handle it appropriately. A follow up patch will make dwc3_core_init() set -EPROBE_DEFER in this case and bail out. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Link: https://lore.kernel.org/r/20221205201527.13525-2-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-12usb: dwc3: xilinx: include linux/gpio/consumer.hArnd Bergmann1-0/+1
[ Upstream commit e498a04443240c15c3c857165f7b652b87f4fd96 ] The newly added gpio consumer calls cause a build failure in configurations that fail to include the right header implicitly: drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp': drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration] 207 | reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); | ^~~~~~~~~~~~~~~~~~~~~~~ | devm_clk_get_optional Fixes: ca05b38252d7 ("usb: dwc3: xilinx: Add gpio-reset support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230103121755.956027-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-12usb: dwc3: gadget: Ignore End Transfer delay on teardownThinh Nguyen1-1/+4
commit c4e3ef5685393c5051b52cf1e94b8891d49793ab upstream. If we delay sending End Transfer for Setup TRB to be prepared, we need to check if the End Transfer was in preparation for a driver teardown/soft-disconnect. In those cases, just send the End Transfer command without delay. In the case of soft-disconnect, there's a very small chance the command may not go through immediately. But should it happen, the Setup TRB will be prepared during the polling of the controller halted state, allowing the command to go through then. In the case of disabling endpoint due to reconfiguration (e.g. set_interface(alt-setting) or usb reset), then it's driven by the host. Typically the host wouldn't immediately cancel the control request and send another control transfer to trigger the End Transfer command timeout. Fixes: 4db0fbb60136 ("usb: dwc3: gadget: Don't delay End Transfer on delayed_status") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f1617a323e190b9cc408fb8b65456e32b5814113.1670546756.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31xhci: Prevent infinite loop in transaction errors recovery for streamsMathias Nyman2-5/+11
commit a1575120972ecd7baa6af6a69e4e7ea9213bde7c upstream. Make sure to also limit the amount of soft reset retries for transaction errors on streams in cases where the transaction error event doesn't point to any specific TRB. In these cases we don't know the TRB or stream ring, but we do know which endpoint had the error. To keep error counting simple and functional, move the current err_count from ring structure to endpoint structure. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_initMiaoqian Lin1-3/+10
commit 97a48da1619ba6bd42a0e5da0a03aa490a9496b1 upstream. of_icc_get() alloc resources for path handle, we should release it when not need anymore. Like the release in dwc3_qcom_interconnect_exit() function. Add icc_put() in error handling to fix this. Fixes: bea46b981515 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver") Cc: stable <stable@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20221206081731.818107-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31usb: dwc3: core: defer probe on ulpi_read_id timeoutFerry Toth1-1/+6
commit 63130462c919ece0ad0d9bb5a1f795ef8d79687e upstream. Since commit 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present"), Dual Role support on Intel Merrifield platform broke due to rearranging the call to dwc3_get_extcon(). It appears to be caused by ulpi_read_id() masking the timeout on the first test write. In the past dwc3 probe continued by calling dwc3_core_soft_reset() followed by dwc3_get_extcon() which happend to return -EPROBE_DEFER. On deferred probe ulpi_read_id() finally succeeded. Due to above mentioned rearranging -EPROBE_DEFER is not returned and probe completes without phy. On Intel Merrifield the timeout on the first test write issue is reproducible but it is difficult to find the root cause. Using a mainline kernel and rootfs with buildroot ulpi_read_id() succeeds. As soon as adding ftrace / bootconfig to find out why, ulpi_read_id() fails and we can't analyze the flow. Using another rootfs ulpi_read_id() fails even without adding ftrace. We suspect the issue is some kind of timing / race, but merely retrying ulpi_read_id() does not resolve the issue. As we now changed ulpi_read_id() to return -ETIMEDOUT in this case, we need to handle the error by calling dwc3_core_soft_reset() and request -EPROBE_DEFER. On deferred probe ulpi_read_id() is retried and succeeds. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Link: https://lore.kernel.org/r/20221205201527.13525-3-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_modeSven Peter1-6/+10
commit 62c73bfea048e66168df09da6d3e4510ecda40bb upstream. dwc->desired_dr_role is changed by dwc3_set_mode inside a spinlock but then read by __dwc3_set_mode outside of that lock. This can lead to a race condition when very quick successive role switch events happen: CPU A dwc3_set_mode(DWC3_GCTL_PRTCAP_HOST) // first role switch event spin_lock_irqsave(&dwc->lock, flags); dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_HOST spin_unlock_irqrestore(&dwc->lock, flags); queue_work(system_freezable_wq, &dwc->drd_work); CPU B __dwc3_set_mode // .... spin_lock_irqsave(&dwc->lock, flags); // desired_dr_role is DWC3_GCTL_PRTCAP_HOST dwc3_set_prtcap(dwc, dwc->desired_dr_role); spin_unlock_irqrestore(&dwc->lock, flags); CPU A dwc3_set_mode(DWC3_GCTL_PRTCAP_DEVICE) // second event spin_lock_irqsave(&dwc->lock, flags); dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_DEVICE spin_unlock_irqrestore(&dwc->lock, flags); CPU B (continues running __dwc3_set_mode) switch (dwc->desired_dr_role) { // DWC3_GCTL_PRTCAP_DEVICE // .... case DWC3_GCTL_PRTCAP_DEVICE: // .... ret = dwc3_gadget_init(dwc); We then have DWC3_GCTL.DWC3_GCTL_PRTCAPDIR = DWC3_GCTL_PRTCAP_HOST and dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST but initialized the controller in device mode. It's also possible to get into a state where both host and device are intialized at the same time. Fix this race by creating a local copy of desired_dr_role inside __dwc3_set_mode while holding dwc->lock. Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Cc: stable <stable@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20221128161526.79730-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irqChunfeng Yun1-1/+0
commit 03a88b0bafbe3f548729d970d8366f48718c9b19 upstream. Can not set the @shared_hcd to NULL before decrease the usage count by usb_put_hcd(), this will cause the shared hcd not released. Fixes: 04284eb74e0c ("usb: xhci-mtk: add support runtime PM") Cc: <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20221128063337.18124-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31usb: cdnsp: fix lack of ZLP for ep0Pawel Laszczak1-10/+32
commit ae423ef5d095e09970f52c08020fdbf7f9d87c22 upstream. Patch implements the handling of ZLP for control transfer. To send the ZLP driver must prepare the extra TRB in TD with length set to zero and TRB type to TRB_NORMAL. The first TRB must have set TRB_CHAIN flag, TD_SIZE = 1 and TRB type to TRB_DATA. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20221122085138.332434-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()Yang Yingliang1-1/+1
[ Upstream commit dc18a4c7b3bd447cef2395deeb1f6ac16dfaca0e ] I got the following report while doing fault injection test: OF: ERROR: memory leak, expected refcount 1 instead of 4, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/tcpc@60/connector If wusb3801_hw_init() fails, fwnode_handle_put() needs be called to avoid refcount leak. Fixes: d016cbe4d7ac ("usb: typec: Support the WUSB3801 port controller") Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221203071027.3808308-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: storage: Add check for kcallocJiasheng Jiang1-0/+2
[ Upstream commit c35ca10f53c51eeb610d3f8fbc6dd6d511b58a58 ] As kcalloc may return NULL pointer, the return value should be checked and return error if fails as same as the ones in alauda_read_map. Fixes: e80b0fade09e ("[PATCH] USB Storage: add alauda support") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20221208110058.12983-1-jiasheng@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: gadget: f_hid: fix refcount leak on error pathJohn Keeping1-0/+1
[ Upstream commit 70a3288a7586526315105c699b687d78cd32559a ] When failing to allocate report_desc, opts->refcnt has already been incremented so it needs to be decremented to avoid leaving the options structure permanently locked. Fixes: 21a9476a7ba8 ("usb: gadget: hid: add configfs support") Tested-by: Lee Jones <lee@kernel.org> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Lee Jones <lee@kernel.org> Signed-off-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20221122123523.3068034-3-john@metanate.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: gadget: f_hid: fix f_hidg lifetime vs cdevJohn Keeping1-24/+28
[ Upstream commit 89ff3dfac604614287ad5aad9370c3f984ea3f4b ] The embedded struct cdev does not have its lifetime correctly tied to the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN is held open while the gadget is deleted. This can readily be replicated with libusbgx's example programs (for conciseness - operating directly via configfs is equivalent): gadget-hid exec 3<> /dev/hidg0 gadget-vid-pid-remove exec 3<&- Pull the existing device up in to struct f_hidg and make use of the cdev_device_{add,del}() helpers. This changes the lifetime of the device object to match struct f_hidg, but note that it is still added and deleted at the same time. Fixes: 71adf1189469 ("USB: gadget: add HID gadget driver") Tested-by: Lee Jones <lee@kernel.org> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Lee Jones <lee@kernel.org> Signed-off-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20221122123523.3068034-2-john@metanate.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: core: hcd: Fix return value check in usb_hcd_setup_local_mem()Yang Yingliang1-1/+5
[ Upstream commit 3c347cdafa3db43337870006e5c2d7b78a8dae20 ] If dmam_alloc_attrs() fails, it returns NULL pointer and never return ERR_PTR(), so repleace IS_ERR() with IS_ERR_OR_NULL() and if it's NULL, returns -ENOMEM. Fixes: 9ba26f5cecd8 ("ARM: sa1100/assabet: move dmabounce hack to ohci driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221125064120.2842452-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: roles: fix of node refcount leak in usb_role_switch_is_parent()Yang Yingliang1-1/+4
[ Upstream commit 1ab30c610630da5391a373cddb8a065bf4c4bc01 ] I got the following report while doing device(mt6370-tcpc) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/pmic@34 The 'parent' returned by fwnode_get_parent() with refcount incremented. it needs be put after using. Fixes: 6fadd72943b8 ("usb: roles: get usb-role-switch from parent") Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221122111226.251588-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31USB: gadget: Fix use-after-free during usb config switchJiantao Zhang1-6/+6
[ Upstream commit afdc12887f2b2ecf20d065a7d81ad29824155083 ] In the process of switching USB config from rndis to other config, if the hardware does not support the ->pullup callback, or the hardware encounters a low probability fault, both of them may cause the ->pullup callback to fail, which will then cause a system panic (use after free). The gadget drivers sometimes need to be unloaded regardless of the hardware's behavior. Analysis as follows: ======================================================================= (1) write /config/usb_gadget/g1/UDC "none" gether_disconnect+0x2c/0x1f8 rndis_disable+0x4c/0x74 composite_disconnect+0x74/0xb0 configfs_composite_disconnect+0x60/0x7c usb_gadget_disconnect+0x70/0x124 usb_gadget_unregister_driver+0xc8/0x1d8 gadget_dev_desc_UDC_store+0xec/0x1e4 (2) rm /config/usb_gadget/g1/configs/b.1/f1 rndis_deregister+0x28/0x54 rndis_free+0x44/0x7c usb_put_function+0x14/0x1c config_usb_cfg_unlink+0xc4/0xe0 configfs_unlink+0x124/0x1c8 vfs_unlink+0x114/0x1dc (3) rmdir /config/usb_gadget/g1/functions/rndis.gs4 panic+0x1fc/0x3d0 do_page_fault+0xa8/0x46c do_mem_abort+0x3c/0xac el1_sync_handler+0x40/0x78 0xffffff801138f880 rndis_close+0x28/0x34 eth_stop+0x74/0x110 dev_close_many+0x48/0x194 rollback_registered_many+0x118/0x814 unregister_netdev+0x20/0x30 gether_cleanup+0x1c/0x38 rndis_attr_release+0xc/0x14 kref_put+0x74/0xb8 configfs_rmdir+0x314/0x374 If gadget->ops->pullup() return an error, function rndis_close() will be called, then it will causes a use-after-free problem. ======================================================================= Fixes: 0a55187a1ec8 ("USB: gadget core: Issue ->disconnect() callback from usb_gadget_disconnect()") Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com> Signed-off-by: TaoXue <xuetao09@huawei.com> Link: https://lore.kernel.org/r/20221121130805.10735-1-water.zhangjiantao@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: musb: omap2430: Fix probe regression for missing resourcesTony Lindgren1-0/+54
[ Upstream commit ffbe2feac59b37c8dc536727552b4f375e1b9aec ] Probe for omap2430 glue layer is now broken for interrupt resources in all cases. Commit 239071064732 ("partially Revert "usb: musb: Set the DT node on the child device"") broke probing for SoCs using ti-sysc interconnect target module as the dt node is not found. Commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") caused omap3 to fail with error "-ENXIO: IRQ mc not found" as the IRQ resources are no longer automatically populated from devicetree. Let's fix the issues by calling device_set_of_node_from_dev() only if the SoC has been updated to probe with ti-sysc. And for legacy SoCs, let's populate the resources manually as needed. Note that once we have updated the SoCs to probe with proper devicetree data in all cases, this is no longer needed. But doing that requires patching both devicetree and SoC code, so let's fix the probe issues first. Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") Fixes: 239071064732 ("partially Revert "usb: musb: Set the DT node on the child device"") Cc: H. Nikolaus Schaller <hns@goldelico.com> Reported-by: Sicelo Mhlongo <absicsz@gmail.com> Tested-by: Sicelo Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20221118102532.34458-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: typec: tipd: Fix typec_unregister_port error pathsSven Peter1-3/+4
[ Upstream commit 4c8f27ba9ede0118cac9d775204f9b0ecdb877b0 ] typec_unregister_port is only called for some error paths after typec_register_port was successful. Ensure it's called in all cases. Fixes: 92440202a880 ("usb: typec: tipd: Only update power status on IRQ") Signed-off-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221114174449.34634-3-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: typec: tipd: Fix spurious fwnode_handle_put in error pathSven Peter1-1/+1
[ Upstream commit 782c70edc4852a5d39be12377a85501546236212 ] The err_role_put error path always calls fwnode_handle_put to release the fwnode. This path can be reached after probe itself has already released that fwnode though. Fix that by moving fwnode_handle_put in the happy path to the very end. Fixes: 18a6c866bb19 ("usb: typec: tps6598x: Add USB role switching logic") Signed-off-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221114174449.34634-2-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: typec: tipd: Cleanup resources if devm_tps6598_psy_register failsSven Peter1-1/+1
[ Upstream commit 19c220e9ab00f50edefb9667e3101e84a5112df2 ] We can't just return if devm_tps6598_psy_register fails since previous resources are not devres managed and have yet to be cleaned up. Fixes: 10eb0b6ac63a ("usb: typec: tps6598x: Export some power supply properties") Signed-off-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221114174449.34634-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()Yang Yingliang1-1/+4
[ Upstream commit 0384e87e3fec735e47f1c133c796f32ef7a72a9b ] I got the following report while doing device(mt6370-tcpc) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/pmic@34/tcpc/connector The 'fwnode' set in tcpci_parse_config() which is called in tcpci_register_port(), its node refcount is increased in device_get_named_child_node(). It needs be put while exiting, so call fwnode_handle_put() in the error path of tcpci_register_port() and in tcpci_unregister_port() to avoid leak. Fixes: 5e85a04c8c0d ("usb: typec: add fwnode to tcpc") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221121062416.1026192-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: typec: Check for ops->exit instead of ops->enter in altmode_exitSven Peter1-1/+1
[ Upstream commit b6ddd180e3d9f92c1e482b3cdeec7dda086b1341 ] typec_altmode_exit checks if ops->enter is not NULL but then calls ops->exit a few lines below. Fix that and check for the function pointer it's about to call instead. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Signed-off-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221114165924.33487-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: fotg210-udc: Fix ages old endianness issuesLinus Walleij1-6/+6
[ Upstream commit 46ed6026ca2181c917c8334a82e3eaf40a6234dd ] The code in the FOTG210 driver isn't entirely endianness-agnostic as reported by the kernel robot sparse testing. This came to the surface while moving the files around. The driver is only used on little-endian systems, so this causes no real-world regression, but it is nice to be strict and have some compile coverage also on big endian machines, so fix it up with the right LE accessors. Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-usb/202211110910.0dJ7nZCn-lkp@intel.com/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221111090317.94228-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31usb: musb: remove extra check in musb_gadget_vbus_drawIvaylo Dimitrov1-2/+0
[ Upstream commit ecec4b20d29c3d6922dafe7d2555254a454272d2 ] The checks for musb->xceiv and musb->xceiv->set_power duplicate those in usb_phy_set_power(), so there is no need of them. Moreover, not calling usb_phy_set_power() results in usb_phy_set_charger_current() not being called, so current USB config max current is not propagated through USB charger framework and charger drivers may try to draw more current than allowed or possible. Fix that by removing those extra checks and calling usb_phy_set_power() directly. Tested on Motorola Droid4 and Nokia N900 Fixes: a9081a008f84 ("usb: phy: Add USB charger support") Cc: stable <stable@kernel.org> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Link: https://lore.kernel.org/r/1669400475-4762-1-git-send-email-ivo.g.dimitrov.75@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-21usb: dwc3: pci: Update PCIe device ID for USB3 controller on CPU sub-system ↵Shruthi Sanil1-1/+1
for Raptor Lake commit f05f80f217bf52443a2582bca19fd78188333f25 upstream. The device ID 0xa70e is defined for the USB3 device controller in the CPU sub-system of Raptor Lake platform. Hence updating the ID accordingly. Fixes: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake") Cc: stable <stable@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com> Link: https://lore.kernel.org/r/20221125105327.27945-1-shruthi.sanil@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-21usb: typec: ucsi: Resume in separate workHeikki Krogerus2-4/+14
commit e0dced9c7d4763fd97c86a13902d135f03cc42eb upstream. It can take more than one second to check each connector when the system is resumed. So if you have, say, eight connectors, it may take eight seconds for ucsi_resume() to finish. That's a bit too much. This will modify ucsi_resume() so that it schedules a work where the interface is actually resumed instead of checking the connectors directly. The connections will also be checked in separate tasks which are queued for each connector separately. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216706 Fixes: 99f6d4361113 ("usb: typec: ucsi: Check the connection on resume") Cc: <stable@vger.kernel.org> Reported-by: Todd Brandt <todd.e.brandt@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221123093021.25981-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-21xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-NReka Norman1-1/+3
commit fed70b61ef2c0aed54456db3d485b215f6cc3209 upstream. ADL-N systems have the same issue as ADL-P, where a large boot firmware delay is seen if USB ports are left in U3 at shutdown. So apply the XHCI_RESET_TO_DEFAULT quirk to ADL-N as well. This patch depends on commit 34cd2db408d5 ("xhci: Add quirk to reset host back to default state at shutdown"). The issue it fixes is a ~20s boot time delay when booting from S5. It affects ADL-N devices, and ADL-N support was added starting from v5.16. Cc: stable@vger.kernel.org Signed-off-by: Reka Norman <rekanorman@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-21USB: serial: f81534: fix division by zero on line-speed changeJohan Hovold1-5/+7
commit 188c9c2e0c7f4ae864113f80c40bafb394062271 upstream. The driver leaves the line speed unchanged in case a requested speed is not supported. Make sure to handle the case where the current speed is B0 (hangup) without dividing by zero when determining the clock source. Fixes: 3aacac02f385 ("USB: serial: f81534: add high baud rate support") Cc: stable@vger.kernel.org # 4.16 Cc: Ji-Ze Hong (Peter Hong) <hpeter@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-21USB: serial: f81232: fix division by zero on line-speed changeJohan Hovold1-5/+7
commit a08ca6ebafe615c9028c53fc4c9e6c9b2b1f2888 upstream. The driver leaves the line speed unchanged in case a requested speed is not supported. Make sure to handle the case where the current speed is B0 (hangup) without dividing by zero when determining the clock source. Fixes: 268ddb5e9b62 ("USB: serial: f81232: add high baud rate support") Cc: stable@vger.kernel.org # 5.2 Cc: Ji-Ze Hong (Peter Hong) <hpeter@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-21USB: serial: cp210x: add Kamstrup RF sniffer PIDsBruno Thomsen1-0/+2
commit e88906b169ebcb8046e8f0ad76edd09ab41cfdfe upstream. The RF sniffers are based on cp210x where the RF frontends are based on a different USB stack. RF sniffers can analyze packets meta data including power level and perform packet injection. Can be used to perform RF frontend self-test when connected to a concentrator, ex. arch/arm/boot/dts/imx7d-flex-concentrator.dts Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-21USB: serial: option: add Quectel EM05-G modemDuke Xin1-0/+3
commit f0052d7a1edb3d8921b4e154aa8c46c4845b3714 upstream. The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0311 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0311 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-21usb: gadget: uvc: Prevent buffer overflow in setup handlerSzymon Heidrich1-2/+3
commit 4c92670b16727365699fe4b19ed32013bab2c107 upstream. Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes. Fixes: cdda479f15cd ("USB gadget: video class function driver") Cc: stable <stable@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20221206141301.51305-1-szymon.heidrich@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-22usb: cdnsp: fix issue with ZLP - added TD_SIZE = 1Pawel Laszczak1-4/+10
Patch modifies the TD_SIZE in TRB before ZLP TRB. The TD_SIZE in TRB before ZLP TRB must be set to 1 to force processing ZLP TRB by controller. cc: <stable@vger.kernel.org> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221115092218.421267-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-22usb: dwc3: gadget: Clear ep descriptor lastThinh Nguyen1-6/+6
Until the endpoint is disabled, its descriptors should remain valid. When its requests are removed from ep disable, the request completion routine may attempt to access the endpoint's descriptor. Don't clear the descriptors before that. Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/45db7c83b209259115bf652af210f8b2b3b1a383.1668561364.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-22usb: dwc3: exynos: Fix remove() functionMarek Szyprowski1-10/+1
The core DWC3 device node was not properly removed by the custom dwc3_exynos_remove_child() function. Replace it with generic of_platform_depopulate() which does that job right. Fixes: adcf20dcd262 ("usb: dwc3: exynos: Use of_platform API to create dwc3 core pdev") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Cc: stable@vger.kernel.org Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20221110154131.2577-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-22usb: cdnsp: Fix issue with Clear Feature Halt EndpointPawel Laszczak2-9/+6
During handling Clear Halt Endpoint Feature request, driver invokes Reset Endpoint command. Because this command has some issue with transition endpoint from Running to Idle state the driver must stop the endpoint by using Stop Endpoint command. cc: <stable@vger.kernel.org> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20221110063005.370656-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-22usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End TransferThinh Nguyen1-1/+2
If there's a disconnection while operating in eSS, there may be a delay in VBUS drop response from the connector. In that case, the internal link state may drop to operate in usb2 speed while the controller thinks the VBUS is still high. The driver must make sure to disable GUSB2PHYCFG.SUSPHY when sending endpoint command while in usb2 speed. The End Transfer command may be called, and only that command needs to go through at this point. Let's keep it simple and unconditionally disable GUSB2PHYCFG.SUSPHY whenever we issue the command. This scenario is not seen in real hardware. In a rare case, our prototype type-c controller/interface may have a slow response triggerring this issue. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/5651117207803c26e2f22ddf4e5ce9e865dcf7c7.1668045468.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-22usb: gadget: uvc: also use try_format in set_formatMichael Grzeschik1-51/+21
Since e219a712bc06 (usb: gadget: uvc: add v4l2 try_format api call) the try_format function is available. With this function includes checks for valid configurations programmed in the configfs. We use this function to ensure to return valid values on the set_format callback. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Fixes: e219a712bc06 ("usb: gadget: uvc: add v4l2 try_format api call") Link: https://lore.kernel.org/r/20221026182240.363055-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-18Merge tag 'usb-serial-6.1-rc6' of ↵Greg Kroah-Hartman1-2/+17
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: "USB-serial fixes for 6.1-rc6 Here are some new modem device ids for 6.1. All have been in linux-next with no reported issues." * tag 'usb-serial-6.1-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add u-blox LARA-L6 modem USB: serial: option: add u-blox LARA-R6 00B modem USB: serial: option: remove old LARA-R6 PID USB: serial: option: add Fibocom FM160 0x0111 composition USB: serial: option: add Sierra Wireless EM9191
2022-11-16USB: serial: option: add u-blox LARA-L6 modemDavide Tronchin1-0/+8
Add LARA-L6 PIDs for three different USB compositions. LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface In default mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions In RmNet mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: RMNET interface In CDC-ECM mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> [ johan: drop PID defines in favour of comments ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-16USB: serial: option: add u-blox LARA-R6 00B modemDavide Tronchin1-0/+2
The official LARA-R6 (00B) modem uses 0x908b PID. LARA-R6 00B does not implement a QMI interface on port 4, the reservation (RSVD(4)) has been added to meet other companies that implement QMI on that interface. LARA-R6 00B USB composition exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-16USB: serial: option: remove old LARA-R6 PIDDavide Tronchin1-2/+1
Remove the UBLOX_PRODUCT_R6XX 0x90fa association since LARA-R6 00B final product uses a new USB composition with different PID. 0x90fa PID used only by LARA-R6 internal prototypes. Move 0x90fa PID directly in the option_ids array since used by other Qualcomm based modem vendors as pointed out in: https://lore.kernel.org/all/6572c4e6-d8bc-b8d3-4396-d879e4e76338@gmail.com Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-15USB: serial: option: add Fibocom FM160 0x0111 compositionReinhard Speyerer1-0/+1
Add support for the following Fibocom FM160 composition: 0x0111: MBIM + MODEM + DIAG + AT T: Bus=01 Lev=02 Prnt=125 Port=01 Cnt=02 Dev#= 93 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0111 Rev= 5.04 S: Manufacturer=Fibocom S: Product=Fibocom FM160 Modem_SN:12345678 S: SerialNumber=12345678 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-09usb: add NO_LPM quirk for Realforce 87U KeyboardNicolas Dumazet1-0/+3
Before adding this quirk, this (mechanical keyboard) device would not be recognized, logging: new full-speed USB device number 56 using xhci_hcd unable to read config index 0 descriptor/start: -32 chopping to 0 config(s) It would take dozens of plugging/unpuggling cycles for the keyboard to be recognized. Keyboard seems to simply work after applying this quirk. This issue had been reported by users in two places already ([1], [2]) but nobody tried upstreaming a patch yet. After testing I believe their suggested fix (DELAY_INIT + NO_LPM + DEVICE_QUALIFIER) was probably a little overkill. I assume this particular combination was tested because it had been previously suggested in [3], but only NO_LPM seems sufficient for this device. [1]: https://qiita.com/float168/items/fed43d540c8e2201b543 [2]: https://blog.kostic.dev/posts/making-the-realforce-87ub-work-with-usb30-on-Ubuntu/ [3]: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678477 Cc: stable@vger.kernel.org Signed-off-by: Nicolas Dumazet <ndumazet@google.com> Link: https://lore.kernel.org/r/20221109122946.706036-1-ndumazet@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09usb: cdns3: host: fix endless superspeed hub port resetLi Jun1-28/+28
When usb 3.0 hub connect with one USB 2.0 device and NO USB 3.0 device, some usb hub reports endless port reset message. [ 190.324169] usb 2-1: new SuperSpeed USB device number 88 using xhci-hcd [ 190.352834] hub 2-1:1.0: USB hub found [ 190.356995] hub 2-1:1.0: 4 ports detected [ 190.700056] usb 2-1: USB disconnect, device number 88 [ 192.472139] usb 2-1: new SuperSpeed USB device number 89 using xhci-hcd [ 192.500820] hub 2-1:1.0: USB hub found [ 192.504977] hub 2-1:1.0: 4 ports detected [ 192.852066] usb 2-1: USB disconnect, device number 89 The reason is the runtime pm state of USB2.0 port is active and USB 3.0 port is suspend, so parent device is active state. cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/usb2/power/runtime_status suspended cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/usb1/power/runtime_status active cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/power/runtime_status active cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/power/runtime_status active So xhci_cdns3_suspend_quirk() have not called. U3 configure is not applied. move U3 configure into host start. Reinit again in resume function in case controller power lost during suspend. Cc: stable@vger.kernel.org 5.10 Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20221026190749.2280367-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09usb: chipidea: fix deadlock in ci_otg_del_timerDuoming Zhou1-0/+2
There is a deadlock in ci_otg_del_timer(), the process is shown below: (thread 1) | (thread 2) ci_otg_del_timer() | ci_otg_hrtimer_func() ... | spin_lock_irqsave() //(1) | ... ... | hrtimer_cancel() | spin_lock_irqsave() //(2) (block forever) We hold ci->lock in position (1) and use hrtimer_cancel() to wait ci_otg_hrtimer_func() to stop, but ci_otg_hrtimer_func() also need ci->lock in position (2). As a result, the hrtimer_cancel() in ci_otg_del_timer() will be blocked forever. This patch extracts hrtimer_cancel() from the protection of spin_lock_irqsave() in order that the ci_otg_hrtimer_func() could obtain the ci->lock. What`s more, there will be no race happen. Because the "next_timer" is always under the protection of spin_lock_irqsave() and we only check whether "next_timer" equals to NUM_OTG_FSM_TIMERS in the following code. Fixes: 3a316ec4c91c ("usb: chipidea: use hrtimer for otg fsm timers") Cc: stable <stable@kernel.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220918033312.94348-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-08usb: dwc3: Do not get extcon device when usb-role-switch is usedJanne Grunau1-0/+10
The change breaks device tree based platforms with PHY device and use usb-role-switch instead of an extcon switch. extcon_find_edev_by_node() will return EPROBE_DEFER if it can not find a device so probing without an extcon device will be deferred indefinitely. Fix this by explicitly checking for usb-role-switch. At least the out-of-tree USB3 support on Apple silicon based platforms using dwc3 with tipd USB Type-C and PD controller is affected by this issue. Fixes: d182c2e1bc92 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Cc: stable@kernel.org Signed-off-by: Janne Grunau <j@jannau.net> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20221106214804.2814-1-j@jannau.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-08usb: typec: tipd: Prevent uninitialized event{1,2} in IRQ handlerSven Peter1-3/+3
If reading TPS_REG_INT_EVENT1/2 fails in the interrupt handler event1 and event2 may be uninitialized when they are used to determine IRQ_HANDLED vs. IRQ_NONE in the error path. Fixes: c7260e29dd20 ("usb: typec: tipd: Add short-circuit for no irqs") Fixes: 45188f27b3d0 ("usb: typec: tipd: Add support for Apple CD321X") Cc: stable <stable@kernel.org> Signed-off-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Link: https://lore.kernel.org/r/20221102161542.30669-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-08usb: typec: mux: Enter safe mode only when pins need to be reconfiguredRajat Khandelwal1-2/+13
There is no point to enter safe mode during DP/TBT configuration if the DP/TBT was already configured in mux. This is because safe mode is only applicable when there is a need to reconfigure the pins in order to avoid damage within/to port partner. In some chrome systems, IOM/mux is already configured before OS comes up. Thus, when driver is probed, it blindly enters safe mode due to PD negotiations but only after gfx driver lowers dp_phy_ownership, will the IOM complete safe mode and send an ack to PMC. Since, that never happens, we see IPC timeout. Hence, allow safe mode only when pin reconfiguration is not required, which makes sense. Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect") Cc: stable <stable@kernel.org> Signed-off-by: Rajat Khandelwal <rajat.khandelwal@linux.intel.com> Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221024171611.181468-1-rajat.khandelwal@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 07:01:59 +0300