summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2022-09-27uas: ignore UAS for Thinkplus chipsHongling Zeng1-0/+7
The UAS mode of Thinkplus(0x17ef, 0x3899) is reported to influence performance and trigger kernel panic on several platforms with the following error message: [ 39.702439] xhci_hcd 0000:0c:00.3: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 39.702442] xhci_hcd 0000:0c:00.3: @000000026c61f810 00000000 00000000 1b000000 05038000 [ 720.545894][13] Workqueue: usb_hub_wq hub_event [ 720.550971][13] ffff88026c143c38 0000000000016300 ffff8802755bb900 ffff880 26cb80000 [ 720.559673][13] ffff88026c144000 ffff88026ca88100 0000000000000000 ffff880 26cb80000 [ 720.568374][13] ffff88026cb80000 ffff88026c143c50 ffffffff8186ae25 ffff880 26ca880f8 [ 720.577076][13] Call Trace: [ 720.580201][13] [<ffffffff8186ae25>] schedule+0x35/0x80 [ 720.586137][13] [<ffffffff8186b0ce>] schedule_preempt_disabled+0xe/0x10 [ 720.593623][13] [<ffffffff8186cb94>] __mutex_lock_slowpath+0x164/0x1e0 [ 720.601012][13] [<ffffffff8186cc3f>] mutex_lock+0x2f/0x40 [ 720.607141][13] [<ffffffff8162b8e9>] usb_disconnect+0x59/0x290 Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663902249837086.19.seg@mailgw Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27usb-storage: Add Hiksemi USB3-FW to IGNORE_UASHongling Zeng1-0/+7
The UAS mode of Hiksemi USB_HDD is reported to fail to work on several platforms with the following error message, then after re-connecting the device will be offlined and not working at all. [ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD [ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00 04 00 00 [ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00 00 08 00 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly,so we need to fall-back to usb-storage. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663901185-21067-1-git-send-email-zenghongling@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27uas: add no-uas quirk for Hiksemi usb_diskHongling Zeng1-0/+7
The UAS mode of Hiksemi is reported to fail to work on several platforms with the following error message, then after re-connecting the device will be offlined and not working at all. [ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD [ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00 04 00 00 [ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00 00 08 00 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly,so we need to fall-back to usb-storage. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663901173-21020-1-git-send-email-zenghongling@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27usb: dwc3: st: Fix node's child namePatrice Chotard1-1/+1
Update node's child name from "dwc3" to "usb", this fixes the following issue: [3.773852] usb-st-dwc3 8f94000.dwc3: failed to find dwc3 core node Fixes: 3120910a099b ("ARM: dts: stih407-family: Harmonize DWC USB3 DT nodes name") Reported-by: Jerome Audu <jerome.audu@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20220926124359.304770-1-patrice.chotard@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27usb: typec: ucsi: Remove incorrect warningHeikki Krogerus1-2/+0
Sink only devices do not have any source capabilities, so the driver should not warn about that. Also DRP (Dual Role Power) capable devices, such as USB Type-C docking stations, do not return any source capabilities unless they are plugged to a power supply themselves. Fixes: 1f4642b72be7 ("usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Cc: <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220922145924.80667-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22Merge tag 'usb-serial-6.0-rc7' of ↵Greg Kroah-Hartman1-0/+6
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: "USB-serial fixes for 6.0-rc7 Here are some new modem device ids. All have been in linux-next with no reported issues." * tag 'usb-serial-6.0-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Quectel RM520N USB: serial: option: add Quectel BG95 0x0203 composition
2022-09-22usb: typec: anx7411: Fix build error without CONFIG_POWER_SUPPLYRen Zhijie1-0/+1
Building without CONFIG_POWER_SUPPLY will fail: drivers/usb/typec/anx7411.o: In function `anx7411_detect_power_mode': anx7411.c:(.text+0x527): undefined reference to `power_supply_changed' drivers/usb/typec/anx7411.o: In function `anx7411_psy_set_prop': anx7411.c:(.text+0x90d): undefined reference to `power_supply_get_drvdata' anx7411.c:(.text+0x930): undefined reference to `power_supply_changed' drivers/usb/typec/anx7411.o: In function `anx7411_psy_get_prop': anx7411.c:(.text+0x94d): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/anx7411.o: In function `anx7411_i2c_probe': anx7411.c:(.text+0x111d): undefined reference to `devm_power_supply_register' drivers/usb/typec/anx7411.o: In function `anx7411_work_func': anx7411.c:(.text+0x167c): undefined reference to `power_supply_changed' anx7411.c:(.text+0x1b55): undefined reference to `power_supply_changed' Add POWER_SUPPLY dependency to Kconfig. Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support") Reviewed-by: Xin Ji <xji@analogixsemi.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Link: https://lore.kernel.org/r/20220920084431.196258-1-renzhijie2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-13USB: serial: option: add Quectel RM520Njerry meng1-0/+4
add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry meng <jerry-meng@foxmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-09-13USB: serial: option: add Quectel BG95 0x0203 compositionCarl Yin(殷张成)1-0/+2
Add support for the following Quectel BG95 composition: 0x0203: Diag + GNSS + Modem + ECM usb-devices output: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0203 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=71d3a21b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Carl Yin <carl.yin@quectel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-09-07usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMAWilliam Wu1-6/+7
On some DWC3 controllers (e.g. Rockchip SoCs), the DWC3 core doesn't support 64-bit DMA address width. In this case, this driver should use the default 32-bit mask. Otherwise, the DWC3 controller will break if it runs on above 4GB physical memory environment. This patch reads the DWC_USB3_AWIDTH bits of GHWPARAMS0 which used for the DMA address width, and only configure 64-bit DMA mask if the DWC_USB3_AWIDTH is 64. Fixes: 45d39448b4d0 ("usb: dwc3: support 64 bit DMA in platform driver") Cc: stable <stable@kernel.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: William Wu <william.wu@rock-chips.com> Link: https://lore.kernel.org/r/20220901083446.3799754-1-william.wu@rock-chips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05USB: core: Fix RST error in hub.cAlan Stern1-1/+1
A recent commit added an invalid RST expression to a kerneldoc comment in hub.c. The fix is trivial. Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls") Cc: <stable@vger.kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-02Revert "usb: gadget: udc-xilinx: replace memcpy with memcpy_toio"Greg Kroah-Hartman1-8/+8
This reverts commit 8cb339f1c1f04baede9d54c1e40ac96247a6393b as it throws up a bunch of sparse warnings as reported by the kernel test robot. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/202209020044.CX2PfZzM-lkp@intel.com Fixes: 8cb339f1c1f0 ("usb: gadget: udc-xilinx: replace memcpy with memcpy_toio") Cc: stable@vger.kernel.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Piyush Mehta <piyush.mehta@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01usb: storage: Add ASUS <0x0b05:0x1932> to IGNORE_UASHu Xiaoying1-0/+7
USB external storage device(0x0b05:1932), use gnome-disk-utility tools to test usb write < 30MB/s. if does not to load module of uas for this device, can increase the write speed from 20MB/s to >40MB/s. Suggested-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hu Xiaoying <huxiaoying@kylinos.cn> Link: https://lore.kernel.org/r/20220901045737.3438046-1-huxiaoying@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01Merge tag 'usb-serial-6.0-rc4' of ↵Greg Kroah-Hartman5-2/+38
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: "USB-serial fixes for 6.0-rc4 Here are a couple of fixes for two long-standing issues with some older ch341 devices and a number of new device ids. All have been in linux-next with no reported issues." * tag 'usb-serial-6.0-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ch341: fix disabled rx timer on older devices USB: serial: ch341: fix lost character on LCR updates USB: serial: cp210x: add Decagon UCA device id USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id USB: serial: option: add Quectel EM060K modem USB: serial: option: add support for OPPO R11 diag port
2022-08-31USB: serial: ch341: fix disabled rx timer on older devicesJohan Hovold1-1/+5
At least one older CH341 appears to have the RX timer enable bit inverted so that setting it disables the RX timer and prevents the FIFO from emptying until it is full. Only set the RX timer enable bit for devices with version newer than 0x27 (even though this probably affects all pre-0x30 devices). Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31USB: serial: ch341: fix lost character on LCR updatesJohan Hovold1-1/+9
Disable LCR updates for pre-0x30 devices which use a different (unknown) protocol for line control and where the current register write causes the next received character to be lost. Note that updating LCR using the INIT command has no effect on these devices either. Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31USB: serial: cp210x: add Decagon UCA device idJohan Hovold1-0/+1
Add the device id for Decagon Devices USB Cable Adapter. Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108 Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31Revert "usb: add quirks for Lenovo OneLink+ Dock"Greg Kroah-Hartman1-4/+0
This reverts commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58. The quirk does not work properly, more work is needed to determine what should be done here. Reported-by: Oliver Neukum <oneukum@suse.com> Cc: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Cc: stable <stable@kernel.org> Fixes: 3d5f70949f1b ("usb: add quirks for Lenovo OneLink+ Dock") Link: https://lore.kernel.org/r/9a17ea86-079f-510d-e919-01bc53a6d09f@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: cdns3: fix issue with rearming ISO OUT endpointPawel Laszczak1-0/+1
ISO OUT endpoint is enabled during queuing first usb request in transfer ring and disabled when TRBERR is reported by controller. After TRBERR and before next transfer added to TR driver must again reenable endpoint but does not. To solve this issue during processing TRBERR event driver must set the flag EP_UPDATE_EP_TRBADDR in priv_ep->flags field. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220825062137.5766-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transferPawel Laszczak1-1/+2
The TRB_SMM flag indicates that DMA has completed the TD service with this TRB. Usually it’s a last TRB in TD. In case of ISOC transfer for bInterval > 1 each ISOC transfer contains more than one TD associated with usb request (one TD per ITP). In such case the TRB_SMM flag will be set in every TD and driver will recognize the end of transfer after processing the first TD with TRB_SMM. In result driver stops updating request->actual and returns incorrect actual length. To fix this issue driver additionally must check TRB_CHAIN which is not used for isochronous transfers. Fixes: 249f0a25e8be ("usb: cdns3: gadget: handle sg list use case at completion correctly") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220825062207.5824-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OSKrishna Kurapati1-2/+4
During cdrom emulation, the response to read_toc command must contain the cdrom address as the number of sectors (2048 byte sized blocks) represented either as an absolute value (when MSF bit is '0') or in terms of PMin/PSec/PFrame (when MSF bit is set to '1'). Incase of cdrom, the fsg_lun_open call sets the sector size to 2048 bytes. When MAC OS sends a read_toc request with MSF set to '1', the store_cdrom_address assumes that the address being provided is the LUN size represented in 512 byte sized blocks instead of 2048. It tries to modify the address further to convert it to 2048 byte sized blocks and store it in MSF format. This results in data transfer failures as the cdrom address being provided in the read_toc response is incorrect. Fixes: 3f565a363cee ("usb: gadget: storage: adapt logic block size to bound block devices") Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Link: https://lore.kernel.org/r/1661570110-19127-1-git-send-email-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30USB: core: Prevent nested device-reset callsAlan Stern1-0/+10
Automatic kernel fuzzing revealed a recursive locking violation in usb-storage: ============================================ WARNING: possible recursive locking detected 5.18.0 #3 Not tainted -------------------------------------------- kworker/1:3/1205 is trying to acquire lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 but task is already holding lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 ... stack backtrace: CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2988 [inline] check_deadlock kernel/locking/lockdep.c:3031 [inline] validate_chain kernel/locking/lockdep.c:3816 [inline] __lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053 lock_acquire kernel/locking/lockdep.c:5665 [inline] lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630 __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747 usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109 r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622 usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458 device_remove drivers/base/dd.c:545 [inline] device_remove+0x11f/0x170 drivers/base/dd.c:537 __device_release_driver drivers/base/dd.c:1222 [inline] device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248 usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627 usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118 usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114 This turned out not to be an error in usb-storage but rather a nested device reset attempt. That is, as the rtl8712 driver was being unbound from a composite device in preparation for an unrelated USB reset (that driver does not have pre_reset or post_reset callbacks), its ->remove routine called usb_reset_device() -- thus nesting one reset call within another. Performing a reset as part of disconnect processing is a questionable practice at best. However, the bug report points out that the USB core does not have any protection against nested resets. Adding a reset_in_progress flag and testing it will prevent such errors in the future. Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/ Cc: stable@vger.kernel.org Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30USB: gadget: Fix obscure lockdep violation for udc_mutexAlan Stern1-10/+16
A recent commit expanding the scope of the udc_lock mutex in the gadget core managed to cause an obscure and slightly bizarre lockdep violation. In abbreviated form: ====================================================== WARNING: possible circular locking dependency detected 5.19.0-rc7+ #12510 Not tainted ------------------------------------------------------ udevadm/312 is trying to acquire lock: ffff80000aae1058 (udc_lock){+.+.}-{3:3}, at: usb_udc_uevent+0x54/0xe0 but task is already holding lock: ffff000002277548 (kn->active#4){++++}-{0:0}, at: kernfs_seq_start+0x34/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kn->active#4){++++}-{0:0}:        lock_acquire+0x68/0x84        __kernfs_remove+0x268/0x380        kernfs_remove_by_name_ns+0x58/0xac        sysfs_remove_file_ns+0x18/0x24        device_del+0x15c/0x440 -> #2 (device_links_lock){+.+.}-{3:3}:        lock_acquire+0x68/0x84        __mutex_lock+0x9c/0x430        mutex_lock_nested+0x38/0x64        device_link_remove+0x3c/0xa0        _regulator_put.part.0+0x168/0x190        regulator_put+0x3c/0x54        devm_regulator_release+0x14/0x20 -> #1 (regulator_list_mutex){+.+.}-{3:3}:        lock_acquire+0x68/0x84        __mutex_lock+0x9c/0x430        mutex_lock_nested+0x38/0x64        regulator_lock_dependent+0x54/0x284        regulator_enable+0x34/0x80        phy_power_on+0x24/0x130        __dwc2_lowlevel_hw_enable+0x100/0x130        dwc2_lowlevel_hw_enable+0x18/0x40        dwc2_hsotg_udc_start+0x6c/0x2f0        gadget_bind_driver+0x124/0x1f4 -> #0 (udc_lock){+.+.}-{3:3}:        __lock_acquire+0x1298/0x20cc        lock_acquire.part.0+0xe0/0x230        lock_acquire+0x68/0x84        __mutex_lock+0x9c/0x430        mutex_lock_nested+0x38/0x64        usb_udc_uevent+0x54/0xe0 Evidently this was caused by the scope of udc_mutex being too large. The mutex is only meant to protect udc->driver along with a few other things. As far as I can tell, there's no reason for the mutex to be held while the gadget core calls a gadget driver's ->bind or ->unbind routine, or while a UDC is being started or stopped. (This accounts for link #1 in the chain above, where the mutex is held while the dwc2_hsotg_udc is started as part of driver probing.) Gadget drivers' ->disconnect callbacks are problematic. Even though usb_gadget_disconnect() will now acquire the udc_mutex, there's a window in usb_gadget_bind_driver() between the times when the mutex is released and the ->bind callback is invoked. If a disconnect occurred during that window, we could call the driver's ->disconnect routine before its ->bind routine. To prevent this from happening, it will be necessary to prevent a UDC from connecting while it has no gadget driver. This should be done already but it doesn't seem to be; currently usb_gadget_connect() has no check for this. Such a check will have to be added later. Some degree of mutual exclusion is required in soft_connect_store(), which can dereference udc->driver at arbitrary times since it is a sysfs callback. The solution here is to acquire the gadget's device lock rather than the udc_mutex. Since the driver core guarantees that the device lock is always held during driver binding and unbinding, this will make the accesses in soft_connect_store() mutually exclusive with any changes to udc->driver. Lastly, it turns out there is one place which should hold the udc_mutex but currently does not: The function_show() routine needs protection while it dereferences udc->driver. The missing lock and unlock calls are added. Link: https://lore.kernel.org/all/b2ba4245-9917-e399-94c8-03a383e7070e@samsung.com/ Fixes: 2191c00855b0 ("USB: gadget: Fix use-after-free Read in usb_udc_uevent()") Cc: Felipe Balbi <balbi@kernel.org> Cc: stable@vger.kernel.org Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YwkfhdxA/I2nOcK7@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: dwc2: fix wrong order of phy_power_on and phy_initHeiner Kallweit1-4/+4
Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before phy_init") the driver complains. In my case (Amlogic SoC) the warning is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init So change the order of the two calls. The same change has to be done to the order of phy_exit() and phy_power_off(). Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c") Cc: stable@vger.kernel.org Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: gadget: udc-xilinx: replace memcpy with memcpy_toioPiyush Mehta1-8/+8
For ARM processor, unaligned access to device memory is not allowed. Method memcpy does not take care of alignment. USB detection failure with the unaligned address of memory access, with below kernel crash. To fix the unaligned address the kernel panic issue, replace memcpy with memcpy_toio method. Kernel crash: Unable to handle kernel paging request at virtual address ffff80000c05008a Mem abort info: ESR = 0x96000061 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000061 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000143b000 [ffff80000c05008a] pgd=100000087ffff003, p4d=100000087ffff003, pud=100000087fffe003, pmd=1000000800bcc003, pte=00680000a0010713 Internal error: Oops: 96000061 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.19-xilinx-v2022.1 #1 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x30/0x260 lr : __xudc_ep0_queue+0xf0/0x110 sp : ffff800008003d00 x29: ffff800008003d00 x28: ffff800009474e80 x27: 00000000000000a0 x26: 0000000000000100 x25: 0000000000000012 x24: ffff000800bc8080 x23: 0000000000000001 x22: 0000000000000012 x21: ffff000800bc8080 x20: 0000000000000012 x19: ffff000800bc8080 x18: 0000000000000000 x17: ffff800876482000 x16: ffff800008004000 x15: 0000000000004000 x14: 00001f09785d0400 x13: 0103020101005567 x12: 0781400000000200 x11: 00000000c5672a10 x10: 00000000000008d0 x9 : ffff800009463cf0 x8 : ffff8000094757b0 x7 : 0201010055670781 x6 : 4000000002000112 x5 : ffff80000c05009a x4 : ffff000800a15012 x3 : ffff00080362ad80 x2 : 0000000000000012 x1 : ffff000800a15000 x0 : ffff80000c050088 Call trace: __memcpy+0x30/0x260 xudc_ep0_queue+0x3c/0x60 usb_ep_queue+0x38/0x44 composite_ep0_queue.constprop.0+0x2c/0xc0 composite_setup+0x8d0/0x185c configfs_composite_setup+0x74/0xb0 xudc_irq+0x570/0xa40 __handle_irq_event_percpu+0x58/0x170 handle_irq_event+0x60/0x120 handle_fasteoi_irq+0xc0/0x220 handle_domain_irq+0x60/0x90 gic_handle_irq+0x74/0xa0 call_on_irq_stack+0x2c/0x60 do_interrupt_handler+0x54/0x60 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x78/0x7c arch_cpu_idle+0x18/0x2c do_idle+0xdc/0x15c cpu_startup_entry+0x28/0x60 rest_init+0xc8/0xe0 arch_call_rest_init+0x10/0x1c start_kernel+0x694/0x6d4 __primary_switched+0xa4/0xac Fixes: 1f7c51660034 ("usb: gadget: Add xilinx usb2 device support") Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20220824071253.1261096-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: typec: Remove retimers properlyHeikki Krogerus1-0/+1
Retimer device class is left dangling when the typec module is unloaded. Attempts to reload the module failed with warning: "sysfs: cannot create duplicate filename '/class/retimer'" Fixing the issue by unregistering the class properly. Fixes: ddaf8d96f93b ("usb: typec: Add support for retimers") Reviewed-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220825140411.10743-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: dwc3: disable USB core PHY managementJohan Hovold1-0/+10
The dwc3 driver manages its PHYs itself so the USB core PHY management needs to be disabled. Use the struct xhci_plat_priv hack added by commits 46034a999c07 ("usb: host: xhci-plat: add platform data support") and f768e718911e ("usb: host: xhci-plat: add priv quirk for skip PHY initialization") to propagate the setting for now. Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") Fixes: 178a0bce05cb ("usb: core: hcd: integrate the PHY wrapper into the HCD core") Tested-by: Matthias Kaehlcke <mka@chromium.org> Cc: stable <stable@kernel.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220825131836.19769-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: add quirks for Lenovo OneLink+ DockJean-Francois Le Fillatre1-0/+4
The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers: 17ef:1018 upstream 17ef:1019 downstream Those two controllers both have problems with some USB3.0 devices, particularly self-powered ones. Typical error messages include: Timeout while waiting for setup device command device not accepting address X, error -62 unable to enumerate USB device By process of elimination the controllers themselves were identified as the cause of the problem. Through trial and error the issue was solved by using USB_QUIRK_RESET_RESUME for both chips. Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220824191320.17883-1-jflf_kernel@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-29USB: serial: option: add support for Cinterion MV32-WA/WB RmNet modeSlark Xiao1-0/+6
We added PIDs for MV32-WA/WB MBIM mode before, now we need to add support for RmNet mode. Test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f3 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F3 USB Mobile Broadband S: SerialNumber=d7b4be8d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f4 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F4 USB Mobile Broadband S: SerialNumber=d095087d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> [ johan: sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-29USB: serial: ftdi_sio: add Omron CS1W-CIF31 device idNiek Nooijens2-0/+8
works perfectly with: modprobe ftdi_sio echo "0590 00b2" | tee /sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null but doing this every reboot is a pain in the ass. Signed-off-by: Niek Nooijens <niek.nooijens@omron.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-29USB: serial: option: add Quectel EM060K modemYonglin Tan1-0/+4
Add usb product id entry for the Quectel EM060K module. "MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030b Rev= 5.04 S: Manufacturer=Quectel S: Product=EM060K-GL S: SerialNumber=89fb57db C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com> [ johan: mention QDSS port and sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-29USB: serial: option: add support for OPPO R11 diag portYan Xinyu1-0/+5
Add support for OPPO R11 USB diag serial port to option driver. This phone uses Qualcomm Snapdragon 660 SoC. usb-devices output: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22d9 ProdID=276c Rev=04.04 S: Manufacturer=OPPO S: Product=SDM660-MTP _SN:09C6BCA7 S: SerialNumber=beb2c403 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn> Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-25Revert "xhci: turn off port power in shutdown"Mathias Nyman3-16/+3
This reverts commit 83810f84ecf11dfc5a9414a8b762c3501b328185. Turning off port power in shutdown did cause issues such as a laptop not proprly powering off, and some specific usb devies failing to enumerate the subsequent boot after a warm reset. So revert this. Fixes: 83810f84ecf1 ("xhci: turn off port power in shutdown") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25xhci: Add grace period after xHC start to prevent premature runtime suspend.Mathias Nyman3-2/+15
After xHC controller is started, either in probe or resume, it can take a while before any of the connected usb devices are visible to the roothub due to link training. It's possible xhci driver loads, sees no acivity and suspends the host before the USB device is visible. In one testcase with a hotplugged xHC controller the host finally detected the connected USB device and generated a wake 500ms after host initial start. If hosts didn't suspend the device duringe training it probablty wouldn't take up to 500ms to detect it, but looking at specs reveal USB3 link training has a couple long timeout values, such as 120ms RxDetectQuietTimeout, and 360ms PollingLFPSTimeout. So Add a 500ms grace period that keeps polling the roothub for 500ms after start, preventing runtime suspend until USB devices are detected. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25xhci: Fix null pointer dereference in remove if xHC has only one roothubMathias Nyman1-3/+8
The remove path in xhci platform driver tries to remove and put both main and shared hcds even if only a main hcd exists (one roothub) This causes a null pointer dereference in reboot for those controllers. Check that the shared_hcd exists before trying to remove it. Fixes: e0fe986972f5 ("usb: host: xhci-plat: prepare operation w/o shared hcd") Reported-by: Alexey Sheplyakov <asheplyakov@basealt.ru> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-23Revert "usb: typec: ucsi: add a common function ucsi_unregister_connectors()"Takashi Iwai1-29/+24
The recent commit 87d0e2f41b8c ("usb: typec: ucsi: add a common function ucsi_unregister_connectors()") introduced a regression that caused NULL dereference at reading the power supply sysfs. It's a stale sysfs entry that should have been removed but remains with NULL ops. The commit changed the error handling to skip the entries after a NULL con->wq, and this leaves the power device unreleased. For addressing the regression, the straight revert is applied here. Further code improvements can be done from the scratch again. Link: https://bugzilla.suse.com/show_bug.cgi?id=1202386 Link: https://lore.kernel.org/r/87r11cmbx0.wl-tiwai@suse.de Fixes: 87d0e2f41b8c ("usb: typec: ucsi: add a common function ucsi_unregister_connectors()") Cc: <stable@vger.kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220823065455.32579-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-23usb: dwc3: qcom: suppress unused-variable warningJohan Hovold1-1/+1
The dwc3_qcom_read_usb2_speed() helper is now only called when the controller is acting as host, but the compiler will warn that the hcd variable is unused in gadget-only W=1 builds. Fixes: c06795f114a6 ("usb: dwc3: qcom: fix gadget-only builds") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220822100550.3039-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020)Thierry GUIBERT1-0/+3
Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver enabling the AT serial port. The Vendor Id is 0x0C26 The Product ID is 0x0020 Output of lsusb : Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0c26 Prolific Technology Inc. idProduct 0x0020 bcdDevice 0.00 iManufacturer 1 ICOM Inc. iProduct 2 ICOM Radio iSerial 3 *obfuscated* bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0030 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Thierry GUIBERT <thierry.guibert@croix-rouge.fr> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: gadget: f_uac2: fix superspeed transferJing Leng1-2/+14
On page 362 of the USB3.2 specification ( https://usb.org/sites/default/files/usb_32_20210125.zip), The 'SuperSpeed Endpoint Companion Descriptor' shall only be returned by Enhanced SuperSpeed devices that are operating at Gen X speed. Each endpoint described in an interface is followed by a 'SuperSpeed Endpoint Companion Descriptor'. If users use SuperSpeed UDC, host can't recognize the device if endpoint doesn't have 'SuperSpeed Endpoint Companion Descriptor' followed. Currently in the uac2 driver code: 1. ss_epout_desc_comp follows ss_epout_desc; 2. ss_epin_fback_desc_comp follows ss_epin_fback_desc; 3. ss_epin_desc_comp follows ss_epin_desc; 4. Only ss_ep_int_desc endpoint doesn't have 'SuperSpeed Endpoint Companion Descriptor' followed, so we should add it. Fixes: eaf6cbe09920 ("usb: gadget: f_uac2: add volume and mute support") Cc: stable <stable@kernel.org> Signed-off-by: Jing Leng <jleng@ambarella.com> Signed-off-by: Jack Pham <quic_jackp@quicinc.com> Link: https://lore.kernel.org/r/20220721014815.14453-1-quic_jackp@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: xhci-mtk: fix bandwidth release issueChunfeng Yun1-2/+2
This happens when @udev->reset_resume is set to true, when usb resume, the flow as below: - hub_resume - usb_disable_interface - usb_disable_endpoint - usb_hcd_disable_endpoint - xhci_endpoint_disable // it set @ep->hcpriv to NULL Then when reset usb device, it will drop allocated endpoints, the flow as below: - usb_reset_and_verify_device - usb_hcd_alloc_bandwidth - xhci_mtk_drop_ep but @ep->hcpriv is already set to NULL, the bandwidth will be not released anymore. Due to the added endponts are stored in hash table, we can drop the check of @ep->hcpriv. Fixes: 4ce186665e7c ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint") Cc: stable <stable@kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220819080556.32215-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19usb: xhci-mtk: relax TT periodic bandwidth allocationChunfeng Yun1-9/+2
Currently uses the worst case byte budgets on FS/LS bus bandwidth, for example, for an isochronos IN endpoint with 192 bytes budget, it will consume the whole 5 uframes(188 * 5) while the actual FS bus budget should be just 192 bytes. It cause that many usb audio headsets with 3 interfaces (audio input, audio output, and HID) cannot be configured. To improve it, changes to use "approximate" best case budget for FS/LS bandwidth management. For the same endpoint from the above example, the approximate best case budget is now reduced to (188 * 2) bytes. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220819080556.32215-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: typec: altmodes/displayport: correct pin assignment for UFP receptaclesPablo Sun1-2/+2
Fix incorrect pin assignment values when connecting to a monitor with Type-C receptacle instead of a plug. According to specification, an UFP_D receptacle's pin assignment should came from the UFP_D pin assignments field (bit 23:16), while an UFP_D plug's assignments are described in the DFP_D pin assignments (bit 15:8) during Mode Discovery. For example the LG 27 UL850-W is a monitor with Type-C receptacle. The monitor responds to MODE DISCOVERY command with following DisplayPort Capability flag: dp->alt->vdo=0x140045 The existing logic only take cares of UPF_D plug case, and would take the bit 15:8 for this 0x140045 case. This results in an non-existing pin assignment 0x0 in dp_altmode_configure. To fix this problem a new set of macros are introduced to take plug/receptacle differences into consideration. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Co-developed-by: Pablo Sun <pablo.sun@mediatek.com> Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Guillaume Ranquet <granquet@baylibre.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: misc: onboard_usb_hub: Drop reset delay in onboard_hub_power_off()Matthias Kaehlcke1-4/+1
onboard_hub_power_off() currently has a delay after asserting the reset of the hub. There is already a delay in onboard_hub_power_on() before de-asserting the reset, which ensures that the reset is asserted for the required time, so the delay in _power_off() is not needed. Skip the reset GPIO check before calling gpiod_set_value_cansleep(), the function returns early when the GPIO descriptor is NULL. Reviewed-By: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20220805111836.1.Id5a4dc0a2c046236116693aa55672295513a0f2a@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: dwc3: gadget: Avoid duplicate requests to enable Run/StopWesley Cheng1-3/+5
Relocate the pullups_connected check until after it is ensured that there are no runtime PM transitions. If another context triggered the DWC3 core's runtime resume, it may have already enabled the Run/Stop. Do not re-run the entire pullup sequence again, as it may issue a core soft reset while Run/Stop is already set. This patch depends on commit 69e131d1ac4e ("usb: dwc3: gadget: Prevent repeat pullup()") Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded") Cc: stable <stable@kernel.org> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220728020647.9377-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: dwc3: pci: Add support for Intel Raptor LakeHeikki Krogerus1-0/+4
This adds the necessary PCI device ID for the controller inside the Intel Raptor Lake CPU block. The controllers that are part of the PCH (chipset) have separate device IDs. Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220815123334.87526-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake IOM deviceUtkarsh Patel1-2/+7
This adds the necessary ACPI ID for Intel Meteor Lake IOM devices. The callback function is_memory() is modified so that it also checks if the resource descriptor passed to it is a memory type "Address Space Resource Descriptor". On Intel Meteor Lake the ACPI memory resource is not described using the "32-bit Memory Range Descriptor" because the memory is outside of the 32-bit address space. The memory resource is described using the "Address Space Resource Descriptor" instead. Intel Meteor Lake is the first platform to describe the memory resource for this device with Address Space Resource Descriptor, but it most likely will not be the last. Therefore the change to the is_memory() callback function is made generic. Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com> Cc: stable@vger.kernel.org [ heikki: Rewrote the commit message. ] Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220816101629.69054-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: dwc3: qcom: clean up suspend callbacksJohan Hovold1-8/+11
Clean up the suspend callbacks by separating the error and success paths to improve readability. Also drop a related redundant initialisation. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-10-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: dwc3: qcom: fix wakeup implementationJohan Hovold2-4/+7
It is the Qualcomm glue wakeup interrupts that may be able to wake the system from suspend and this can now be described in the devicetree. Move the wakeup-source property handling over from the core driver and instead propagate the capability setting to the core device during probe. This is needed as there is currently no way for the core driver to query the wakeup setting of the glue device, but it is the core driver that manages the PHY power state during suspend. Also don't leave the PHYs enabled when system wakeup has been disabled through sysfs. Fixes: 649f5c842ba3 ("usb: dwc3: core: Host wake up support from system suspend") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-9-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: dwc3: qcom: fix peripheral and OTG suspendJohan Hovold1-3/+12
A recent commit implementing wakeup support in host mode instead broke suspend for peripheral and OTG mode. The hack that was added in the suspend path to determine the speed of any device connected to the USB2 bus not only accesses internal driver data for a child device, but also dereferences a NULL pointer or accesses freed data when the controller is not acting as host. There's no quick fix to the layering violation, but since reverting would leave us with broken suspend in host mode with wakeup triggering immediately, let's keep the hack for now. Fix the immediate issues by only checking the host bus speed and enabling wakeup interrupts when acting as host. Fixes: 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-7-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18usb: dwc3: qcom: fix runtime PM wakeupJohan Hovold1-8/+11
A device must enable wakeups during runtime suspend regardless of whether it is capable and allowed to wake the system up from system suspend. Fixes: 2664deb09306 ("usb: dwc3: qcom: Honor wakeup enabled/disabled state") Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-6-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-20 10:19:26 +0300