summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2020-04-21usb: dwc3: gadget: Don't clear flags before transfer endedThinh Nguyen1-3/+1
commit a114c4ca64bd522aec1790c7e5c60c882f699d8f upstream. We track END_TRANSFER command completion. Don't clear transfer started/ended flag prematurely. Otherwise, we'd run into the problem with restarting transfer before END_TRANSFER command finishes. Fixes: 6d8a019614f3 ("usb: dwc3: gadget: check for Missed Isoc from event status") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17usb: gadget: composite: Inform controller driver of self-poweredThinh Nguyen1-0/+9
commit 5e5caf4fa8d3039140b4548b6ab23dd17fce9b2c upstream. Different configuration/condition may draw different power. Inform the controller driver of the change so it can respond properly (e.g. GET_STATUS request). This fixes an issue with setting MaxPower from configfs. The composite driver doesn't check this value when setting self-powered. Cc: stable@vger.kernel.org Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17usb: gadget: f_fs: Fix use after free issue as part of queue failureSriharsha Allenki1-0/+1
commit f63ec55ff904b2f2e126884fcad93175f16ab4bb upstream. In AIO case, the request is freed up if ep_queue fails. However, io_data->req still has the reference to this freed request. In the case of this failure if there is aio_cancel call on this io_data it will lead to an invalid dequeue operation and a potential use after free issue. Fix this by setting the io_data->req to NULL when the request is freed as part of queue failure. Fixes: 2e4c7553cd6f ("usb: gadget: f_fs: add aio support") Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org> CC: stable <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200326115620.12571-1-sallenki@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17usb: dwc3: core: add support for disabling SS instances in park modeNeil Armstrong2-0/+9
[ Upstream commit 7ba6b09fda5e0cb741ee56f3264665e0edc64822 ] In certain circumstances, the XHCI SuperSpeed instance in park mode can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high load on the single XHCI SuperSpeed instance, the controller can crash like: xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. xhci-hcd xhci-hcd.0.auto: Host halt failed, -110 xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. hub 2-1.1:1.0: hub_ext_port_status failed (err = -22) xhci-hcd xhci-hcd.0.auto: HC died; cleaning up usb 2-1.1-port1: cannot reset (err = -22) Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates the issue. The bit is described as : "When this bit is set to '1' all SS bus instances in park mode are disabled" Synopsys explains: The GUCTL1.PARKMODE_DISABLE_SS is only available in dwc_usb3 controller running in host mode. This should not be set for other IPs. This can be disabled by default based on IP, but I recommend to have a property to enable this feature for devices that need this. CC: Dongjin Kim <tobetter@gmail.com> Cc: Jianxin Pan <jianxin.pan@amlogic.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Jun Li <lijun.kernel@gmail.com> Reported-by: Tim <elatllat@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-17xhci: bail out early if driver can't accress host in resumeMathias Nyman1-1/+3
[ Upstream commit 72ae194704da212e2ec312ab182a96799d070755 ] Bail out early if the xHC host needs to be reset at resume but driver can't access xHC PCI registers. If xhci driver already fails to reset the controller then there is no point in attempting to free, re-initialize, re-allocate and re-start the host. If failure to access the host is detected later, failing the resume, xhci interrupts will be double freed when remove is called. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200312144517.1593-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-17usb: phy: tegra: Include proper GPIO consumer header to fix compile testingKrzysztof Kozlowski1-2/+1
[ Upstream commit 9cb9322a26ae84424c3e16e58617b3d8962fdbbb ] The driver uses only GPIO Descriptor Consumer Interface so include proper header. This fixes compile test failures (e.g. on i386): drivers/usb/phy/phy-tegra-usb.c: In function ‘ulpi_phy_power_on’: drivers/usb/phy/phy-tegra-usb.c:695:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’ [-Werror=implicit-function-declaration] drivers/usb/phy/phy-tegra-usb.c: In function ‘tegra_usb_phy_probe’: drivers/usb/phy/phy-tegra-usb.c:1167:11: error: implicit declaration of function ‘devm_gpiod_get_from_of_node’ [-Werror=implicit-function-declaration] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/1583234960-24909-1-git-send-email-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-17usb: ucsi: ccg: disable runtime pm during fw flashingAjay Gupta1-0/+2
[ Upstream commit 57a5e5f936be583d2c6cef3661c169e3ea4bf922 ] Ucsi ppm is unregistered during fw flashing so disable runtime pm also and reenable after fw flashing is completed and ppm is re-registered. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200217144913.55330-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-13usb: dwc3: gadget: Wrap around when skip TRBsThinh Nguyen1-1/+1
commit 2dedea035ae82c5af0595637a6eda4655532b21e upstream. When skipping TRBs, we need to account for wrapping around the ring buffer and not modifying some invalid TRBs. Without this fix, dwc3 won't be able to check for available TRBs. Cc: stable <stable@vger.kernel.org> Fixes: 7746a8dfb3f9 ("usb: dwc3: gadget: extract dwc3_gadget_ep_skip_trbs()") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01usb: musb: fix crash with highmen PIO and usbmonMans Rullgard1-12/+5
commit 52974d94a206ce428d9d9b6eaa208238024be82a upstream. When handling a PIO bulk transfer with highmem buffer, a temporary mapping is assigned to urb->transfer_buffer. After the transfer is complete, an invalid address is left behind in this pointer. This is not ordinarily a problem since nothing touches that buffer before the urb is released. However, when usbmon is active, usbmon_urb_complete() calls (indirectly) mon_bin_get_data() which does access the transfer buffer if it is set. To prevent an invalid memory access here, reset urb->transfer_buffer to NULL when finished (musb_host_rx()), or do not set it at all (musb_host_tx()). Fixes: 8e8a55165469 ("usb: musb: host: Handle highmem in PIO mode") Signed-off-by: Mans Rullgard <mans@mansr.com> Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-8-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callbackQiujun Huang1-1/+1
commit 57aa9f294b09463492f604feaa5cc719beaace32 upstream. Fix slab-out-of-bounds read in the interrupt-URB completion handler. The boundary condition should be (length - 1) as we access data[position + 1]. Reported-and-tested-by: syzbot+37ba33391ad5f3935bbd@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01USB: cdc-acm: restore capability check orderMatthias Reichl1-9/+9
commit 62d65bdd9d05158aa2547f8ef72375535f3bc6e3 upstream. commit b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL") introduced a regression by changing the order of capability and close settings change checks. When running with CAP_SYS_ADMIN setting the close settings to the values already set resulted in -EOPNOTSUPP. Fix this by changing the check order back to how it was before. Fixes: b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL") Cc: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by: Matthias Reichl <hias@horus.com> Link: https://lore.kernel.org/r/20200327150350.3657-1-hias@horus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01USB: serial: option: add Wistron Neweb D19Q1Pawel Dembicki1-0/+2
commit dfee7e2f478346b12ea651d5c28b069f6a4af563 upstream. This modem is embedded on dlink dwr-960 router. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=d191 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01USB: serial: option: add BroadMobi BM806UPawel Dembicki1-0/+2
commit 6cb2669cb97fc4fdf526127159ac59caae052247 upstream. BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2033 Rev= 2.28 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=f842866cfd5a C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Co-developed-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01USB: serial: option: add support for ASKEY WWHC050Pawel Dembicki1-0/+2
commit 007d20dca2376a751b1dad03442f118438b7e65e upstream. ASKEY WWHC050 is a mcie LTE modem. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1690 ProdID=7588 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=813f0eef6e6e C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution. Co-developed-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18Merge tag 'usb-serial-5.6-rc7' of ↵Greg Kroah-Hartman3-0/+4
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.6-rc7 Here are a couple of new device ids for 5.6-rc. All have been in linux-next with no reported issues. * tag 'usb-serial-5.6-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: pl2303: add device-id for HP LD381 USB: serial: option: add ME910G1 ECM composition 0x110b
2020-03-17USB: cdc-acm: fix rounding error in TIOCSSERIALAnthony Mallet1-9/+16
By default, tty_port_init() initializes those parameters to a multiple of HZ. For instance in line 69 of tty_port.c: port->close_delay = (50 * HZ) / 100; https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69 With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04 linux-image-4.15.0-37-generic), the default setting for close_delay is thus 125. When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then executed with the same setting '12', the value is interpreted as '120' which is different from the current setting and a EPERM error may be raised by set_serial_info() if !CAP_SYS_ADMIN. https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919 Fixes: ba2d8ce9db0a6 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)") Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312133101.7096-2-anthony.mallet@laas.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIALAnthony Mallet1-4/+5
close_delay and closing_wait are specified in hundredth of a second but stored internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies() functions to convert from each other. Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312133101.7096-1-anthony.mallet@laas.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adaptersHans de Goede1-0/+3
We have been receiving bug reports that ethernet connections over RTL8153 based ethernet adapters stops working after a while with errors like these showing up in dmesg when the ethernet stops working: [12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout [12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout [12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1 docks and with generic USB to ethernet dongles using the RTL8153 chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to the kernel commandline and all users who have tried this report that this fixes this. Also note that we already have an existing NO_LPM quirk for the RTL8153 used in the Microsoft Surface Dock (where it uses a different usb-id). This commit adds a NO_LPM quirk for the generic Realtek RTL8153 0bda:8153 usb-id, fixing the Tx timeout errors on these devices. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931 Cc: stable@vger.kernel.org Cc: russianneuromancer@ya.ru Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200313120708.100339-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-17usb: chipidea: udc: fix sleeping function called from invalid contextPeter Chen1-3/+4
The code calls pm_runtime_get_sync with irq disabled, it causes below warning: BUG: sleeping function called from invalid context at wer/runtime.c:1075 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: er/u8:1 CPU: 1 PID: 37 Comm: kworker/u8:1 Not tainted 20200304-00181-gbebfd2a5be98 #1588 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: ci_otg ci_otg_work [<c010e8bd>] (unwind_backtrace) from [<c010a315>] 1/0x14) [<c010a315>] (show_stack) from [<c0987d29>] 5/0x94) [<c0987d29>] (dump_stack) from [<c013e77f>] +0xeb/0x118) [<c013e77f>] (___might_sleep) from [<c052fa1d>] esume+0x75/0x78) [<c052fa1d>] (__pm_runtime_resume) from [<c0627a33>] 0x23/0x74) [<c0627a33>] (ci_udc_pullup) from [<c062fb93>] nect+0x2b/0xcc) [<c062fb93>] (usb_gadget_connect) from [<c062769d>] _connect+0x59/0x104) [<c062769d>] (ci_hdrc_gadget_connect) from [<c062778b>] ssion+0x43/0x48) [<c062778b>] (ci_udc_vbus_session) from [<c062f997>] s_connect+0x17/0x9c) [<c062f997>] (usb_gadget_vbus_connect) from [<c062634d>] bd/0x128) [<c062634d>] (ci_otg_work) from [<c0134719>] rk+0x149/0x404) [<c0134719>] (process_one_work) from [<c0134acb>] 0xf7/0x3bc) [<c0134acb>] (worker_thread) from [<c0139433>] x118) [<c0139433>] (kthread) from [<c01010bd>] (ret_from_fork+0x11/0x34) Tested-by: Dmitry Osipenko <digetx@gmail.com> Cc: <stable@vger.kernel.org> #v5.5 Fixes: 72dc8df7920f ("usb: chipidea: udc: protect usb interrupt enable") Reported-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200316031034.17847-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12USB: serial: pl2303: add device-id for HP LD381Scott Chen2-0/+2
Add a device id for HP LD381 Display LD381: 03f0:0f7f Signed-off-by: Scott Chen <scott@labau.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-12USB: serial: option: add ME910G1 ECM composition 0x110bDaniele Palmas1-0/+2
Add ME910G1 ECM composition 0x110b: tty, tty, tty, ecm Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20200304104310.2938-1-dnlplm@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-12usb: host: xhci-plat: add a shutdownRan Wang1-0/+1
When loading new kernel via kexec, we need to shutdown host controller to avoid any un-expected memory accessing during new kernel boot. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Cc: stable <stable@vger.kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200306092328.41253-1-ran.wang_1@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12usb: typec: ucsi: displayport: Fix a potential race during registrationHeikki Krogerus1-1/+8
Locking the connector in ucsi_register_displayport() to make sure that nothing can access the displayport alternate mode before the function has finished and the alternate mode is actually ready. Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200311130006.41288-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12usb: typec: ucsi: displayport: Fix NULL pointer dereferenceHeikki Krogerus1-0/+3
If the registration of the DisplayPort was not successful, or if the port does not support DisplayPort alt mode in the first place, the function ucsi_displayport_remove_partner() will fail with NULL pointer dereference when it attempts to access the driver data. Adding a check to the function to make sure there really is driver data for the device before modifying it. Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Reported-by: Andrea Gagliardi La Gala <andrea.lagala@gmail.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206365 Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200311130006.41288-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12USB: Disable LPM on WD19's Realtek HubKai-Heng Feng1-0/+3
Realtek Hub (0bda:0x0487) used in Dell Dock WD19 sometimes drops off the bus when bringing underlying ports from U3 to U0. Disabling LPM on the hub during setting link state is not enough, so let's disable LPM completely for this hub. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200205112633.25995-3-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-10usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145cAlberto Mattea1-1/+2
This controller timeouts during suspend (S3) with [ 240.521724] xhci_hcd 0000:30:00.3: WARN: xHC save state timeout [ 240.521729] xhci_hcd 0000:30:00.3: ERROR mismatched command completion event thus preventing the system from entering S3. Moreover it remains in an undefined state where some connected devices stop working until a reboot. Apply the XHCI_SUSPEND_DELAY quirk to make it suspend properly. CC: stable@vger.kernel.org Signed-off-by: Alberto Mattea <alberto@mattea.info> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200306150858.21904-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-10xhci: Do not open code __print_symbolic() in xhci trace eventsSteven Rostedt (VMware)1-17/+6
libtraceevent (used by perf and trace-cmd) failed to parse the xhci_urb_dequeue trace event. This is because the user space trace event format parsing is not a full C compiler. It can handle some basic logic, but is not meant to be able to handle everything C can do. In cases where a trace event field needs to be converted from a number to a string, there's the __print_symbolic() macro that should be used: See samples/trace_events/trace-events-sample.h Some xhci trace events open coded the __print_symbolic() causing the user spaces tools to fail to parse it. This has to be replaced with __print_symbolic() instead. CC: stable@vger.kernel.org Reported-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206531 Fixes: 5abdc2e6e12ff ("usb: host: xhci: add urb_enqueue/dequeue/giveback tracers") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200306150858.21904-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: dwc3: gadget: Update chain bit correctly when using sg listPratham Pratap1-1/+8
If scatter-gather operation is allowed, a large USB request is split into multiple TRBs. For preparing TRBs for sg list, driver iterates over the list and creates TRB for each sg and mark the chain bit to false for the last sg. The current IOMMU driver is clubbing the list of sgs which shares a page boundary into one and giving it to USB driver. With this the number of sgs mapped it not equal to the the number of sgs passed. Because of this USB driver is not marking the chain bit to false since it couldn't iterate to the last sg. This patch addresses this issue by marking the chain bit to false if it is the last mapped sg. At a practical level, this patch resolves USB transfer stalls seen with adb on dwc3 based db845c, pixel3 and other qcom hardware after functionfs gadget added scatter-gather support around v4.20. Credit also to Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> who implemented a very similar fix to this issue. Cc: Felipe Balbi <balbi@kernel.org> Cc: Yang Fei <fei.yang@intel.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Tejas Joglekar <tejas.joglekar@synopsys.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: Todd Kjos <tkjos@google.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linux USB List <linux-usb@vger.kernel.org> Cc: stable <stable@vger.kernel.org> #4.20+ Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org> [jstultz: Slight tweak to remove sg_is_last() usage, reworked commit message, minor comment tweak] Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20200302214443.55783-1-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: core: port: do error out if usb_autopm_get_interface() failsEugeniu Rosca1-2/+8
Reviewing a fresh portion of coverity defects in USB core (specifically CID 1458999), Alan Stern noted below in [1]: On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote: > A revised search finds line 997 in drivers/usb/core/hub.c and lines > 216, 269 in drivers/usb/core/port.c. (I didn't try looking in any > other directories.) AFAICT all three of these should check the > return value, although a error message in the kernel log probably > isn't needed. Factor out the usb_port_runtime_{resume,suspend}() changes into a standalone patch to allow conflict-free porting on top of stable v3.9+. [1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.2002251419120.1485-100000@iolanthe.rowland.org Fixes: 971fcd492cebf5 ("usb: add runtime pm support for usb port device") Cc: stable@vger.kernel.org # v3.9+ Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200226175036.14946-3-erosca@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: core: hub: do error out if usb_autopm_get_interface() failsEugeniu Rosca1-1/+5
Reviewing a fresh portion of coverity defects in USB core (specifically CID 1458999), Alan Stern noted below in [1]: On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote: > A revised search finds line 997 in drivers/usb/core/hub.c and lines > 216, 269 in drivers/usb/core/port.c. (I didn't try looking in any > other directories.) AFAICT all three of these should check the > return value, although a error message in the kernel log probably > isn't needed. Factor out the usb_remove_device() change into a standalone patch to allow conflict-free integration on top of the earliest stable branches. [1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.2002251419120.1485-100000@iolanthe.rowland.org Fixes: 253e05724f9230 ("USB: add a "remove hardware" sysfs attribute") Cc: stable@vger.kernel.org # v2.6.33+ Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200226175036.14946-2-erosca@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: core: hub: fix unhandled return by employing a void functionEugeniu Rosca1-1/+1
Address below Coverity complaint (Feb 25, 2020, 8:06 AM CET): *** CID 1458999: Error handling issues (CHECKED_RETURN) /drivers/usb/core/hub.c: 1869 in hub_probe() 1863 1864 if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND) 1865 hub->quirk_check_port_auto_suspend = 1; 1866 1867 if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) { 1868 hub->quirk_disable_autosuspend = 1; >>> CID 1458999: Error handling issues (CHECKED_RETURN) >>> Calling "usb_autopm_get_interface" without checking return value (as is done elsewhere 97 out of 111 times). 1869 usb_autopm_get_interface(intf); 1870 } 1871 1872 if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) 1873 return 0; 1874 Rather than checking the return value of 'usb_autopm_get_interface()', switch to the usb_autopm_get_interface_no_resume() API, as per: On Tue, Feb 25, 2020 at 10:32:32AM -0500, Alan Stern wrote: ------ 8< ------ > This change (i.e. 'ret = usb_autopm_get_interface') is not necessary, > because the resume operation cannot fail at this point (interfaces > are always powered-up during probe). A better solution would be to > call usb_autopm_get_interface_no_resume() instead. ------ 8< ------ Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: Hardik Gajjar <hgajjar@de.adit-jv.com> Cc: stable@vger.kernel.org # v4.14+ Reported-by: scan-admin@coverity.com Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200226175036.14946-1-erosca@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: storage: Add quirk for Samsung Fit flashJim Lin1-0/+6
Current driver has 240 (USB2.0) and 2048 (USB3.0) as max_sectors, e.g., /sys/bus/scsi/devices/0:0:0:0/max_sectors If data access times out, driver error handling will issue a port reset. Sometimes Samsung Fit (090C:1000) flash disk will not respond to later Set Address or Get Descriptor command. Adding this quirk to limit max_sectors to 64 sectors to avoid issue occurring. Signed-off-by: Jim Lin <jilin@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1583158895-31342-1-git-send-email-jilin@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: quirks: add NO_LPM quirk for Logitech Screen ShareDan Lazewatsky1-0/+3
LPM on the device appears to cause xHCI host controllers to claim that there isn't enough bandwidth to support additional devices. Signed-off-by: Dan Lazewatsky <dlaz@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: https://lore.kernel.org/r/20200226143438.1445-1-gustavo.padovan@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: usb251xb: fix regulator probe and error handlingMarco Felsch1-4/+16
Commit 4d7201cda226 ("usb: usb251xb: add vdd supply support") didn't covered the non-DT use-case and so the regualtor_enable() call during probe will fail on those platforms. Also the commit didn't handled the error case correctly. Move devm_regulator_get() out of usb251xb_get_ofdata() to address the 1st issue. This can be done without worries because devm_regulator_get() handles the non-DT use-case too. Add devm_add_action_or_reset() to address the 2nd bug. Fixes: 4d7201cda226 ("usb: usb251xb: add vdd supply support") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Cc: stable <stable@vger.kernel.org> Acked-by: Richard Leitner <richard.leitner@skidata.com> Link: https://lore.kernel.org/r/20200226072644.18490-1-m.felsch@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: cdns3: gadget: toggle cycle bit before reset endpointPeter Chen1-3/+14
If there are TRBs pending during reset endpoint operation, the DMA will advance after reset operation, but it isn't expected, since the data is not yet available (For OUT, the data is not yet available). After the data is ready, there won't be any interrupt since the EP_TRADDR already points to next TRB entry and doorbell is not set. To fix it, it toggles cycle bit before reset operation, and restores it after reset, it could avoid unexpected DMA advance due to cycle bit is for software during the endpoint reset operation. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200219141455.23257-3-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: cdns3: gadget: link trb should point to next requestPeter Chen1-1/+1
It has marked the dequeue trb as link trb, but its next segment pointer is still itself, it causes the transfer can't go on. Fix it by set its pointer as the trb address for the next request. Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation") Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200219141455.23257-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-17USB: misc: iowarrior: add support for the 100 deviceGreg Kroah-Hartman1-2/+7
Add a new device id for the 100 devie. It has 4 interfaces like the 28 and 28L devices but a larger endpoint so more I/O pins. Cc: Christoph Jung <jung@codemercs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200214161148.GA3963518@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-13Merge tag 'fixes-for-v5.6-rc1' of ↵Greg Kroah-Hartman6-36/+56
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.6-rc1 DWC3 learned that we can't always depend on Event Status bits. A problem was solved which would only surface with scatter list on IN endpoints. DWC2 got a fix for feature requests (both set and clear) and GetStatus request. The serial gadget got a fix for a TX stall bug. Composite framework now works better for SSP devices. * tag 'fixes-for-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: dwc3: debug: fix string position formatting mixup with ret and len usb: gadget: serial: fix Tx stall after buffer overflow usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows usb: dwc2: Fix in ISOC request length checking usb: gadget: composite: Support more than 500mA MaxPower usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus usb: gadget: u_audio: Fix high-speed max packet size usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
2020-02-13Merge tag 'usb-serial-5.6-rc2' of ↵Greg Kroah-Hartman2-1/+11
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.6-rc2 Here's a fix for a ch341 regression in 5.5 which people have started to hit, and a fix for a logic error in an ir-usb error path. Both have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.6-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ch341: fix receiver regression USB: serial: ir-usb: Silence harmless uninitialized variable warning
2020-02-12usb: gadget: udc-xilinx: Fix xudc_stop() kernel-doc formatMichal Simek1-1/+0
The patch removes "driver" parameter which has been removed without updating kernel-doc format. Fixes: 22835b807e7c ("usb: gadget: remove unnecessary 'driver' argument") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/c753b529bdcdfdd40a3cf69121527ec8c63775cb.1581505183.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12USB: misc: iowarrior: add support for the 28 and 28L devicesGreg Kroah-Hartman1-2/+13
Add new device ids for the 28 and 28L devices. These have 4 interfaces instead of 2, but the driver binds the same, so the driver changes are minimal. Cc: Christoph Jung <jung@codemercs.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212040422.2991-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12USB: misc: iowarrior: add support for 2 OEMed devicesGreg Kroah-Hartman1-2/+13
Add support for two OEM devices that are identical to existing IO-Warrior devices, except for the USB device id. Cc: Christoph Jung <jung@codemercs.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212040422.2991-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12USB: Fix novation SourceControl XL after suspendRichard Dodd1-0/+3
Currently, the SourceControl will stay in power-down mode after resuming from suspend. This patch resets the device after suspend to power it up. Signed-off-by: Richard Dodd <richard.o.dodd@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212142220.36892-1-richard.o.dodd@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12xhci: Fix memory leak when caching protocol extended capability PSI tables - ↵Mathias Nyman3-33/+65
take 2 xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable <stable@vger.kernel.org> # v4.4+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200211150158.14475-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12Revert "xhci: Fix memory leak when caching protocol extended capability PSI ↵Greg Kroah-Hartman3-64/+33
tables" This reverts commit fc57313d1017dd6b6f37a94e88daa8df54368ecc. Marek reports that it breaks things: This patch landed in today's linux-next (20200211) and causes NULL pointer dereference during second suspend/resume cycle on Samsung Exynos5422-based (arm 32bit) Odroid XU3lite board: A more complete fix will be added soon. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: fc57313d1017 ("xhci: Fix memory leak when caching protocol extended capability PSI tables") Cc: Paul Menzel <pmenzel@molgen.mpg.de> Cc: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com> Cc: stable <stable@vger.kernel.org> # v4.4+ Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11usb: dwc3: debug: fix string position formatting mixup with ret and lenColin Ian King1-24/+15
Currently the string formatting is mixing up the offset of ret and len. Re-work the code to use just len, remove ret and use scnprintf instead of snprintf and len position accumulation where required. Remove the -ve return check since scnprintf never returns a failure -ve size. Also break overly long lines to clean up checkpatch warnings. Addresses-Coverity: ("Unused value") Fixes: 1381a5113caf ("usb: dwc3: debug: purge usage of strcat") Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-02-11usb: gadget: serial: fix Tx stall after buffer overflowSergey Organov1-1/+3
Symptom: application opens /dev/ttyGS0 and starts sending (writing) to it while either USB cable is not connected, or nobody listens on the other side of the cable. If driver circular buffer overflows before connection is established, no data will be written to the USB layer until/unless /dev/ttyGS0 is closed and re-opened again by the application (the latter besides having no means of being notified about the event of establishing of the connection.) Fix: on open and/or connect, kick Tx to flush circular buffer data to USB layer. Signed-off-by: Sergey Organov <sorganov@gmail.com> Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-02-11usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flagsLars-Peter Clausen1-2/+3
ffs_aio_cancel() can be called from both interrupt and thread context. Make sure that the current IRQ state is saved and restored by using spin_{un,}lock_irq{save,restore}(). Otherwise undefined behavior might occur. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-02-11usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flowsMinas Harutyunyan1-12/+16
SET/CLEAR_FEATURE for Remote Wakeup allowance not handled correctly. GET_STATUS handling provided not correct data on DATA Stage. Issue seen when gadget's dr_mode set to "otg" mode and connected to MacOS. Both are fixed and tested using USBCV Ch.9 tests. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Fixes: fa389a6d7726 ("usb: dwc2: gadget: Add remote_wakeup_allowed flag") Tested-by: Jack Mitchell <ml@embed.me.uk> Cc: stable@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-02-11usb: dwc2: Fix in ISOC request length checkingMinas Harutyunyan1-5/+7
Moved ISOC request length checking from dwc2_hsotg_start_req() function to dwc2_hsotg_ep_queue(). Fixes: 4fca54aa58293 ("usb: gadget: s3c-hsotg: add multi count support") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-19 06:41:26 +0300