summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2018-11-26usb: dwc3: Add workaround for isoc start transfer failureThinh Nguyen3-0/+146
In DWC_usb31 version 1.70a-ea06 and prior, for highspeed and fullspeed isochronous IN, BIT[15:14] of the 16-bit microframe number reported by the XferNotReady event are invalid. The driver uses this number to schedule the isochronous transfer and passes it to the START TRANSFER command. Because this number is invalid, the command may fail. If BIT[15:14] matches the internal 16-bit microframe, the START TRANSFER command will pass and the transfer will start at the scheduled time, if it is off by 1, the command will still pass, but the transfer will start 2 seconds in the future. For all other conditions, the START TRANSFER command will fail with bus-expiry. In order to workaround this issue, we can test for the correct combination of BIT[15:14] by sending START TRANSFER commands with different values of BIT[15:14]: 'b00, 'b01, 'b10, and 'b11. Each combination is 2^14 uframe apart (or 2 seconds). 4 seconds into the future will result in a bus-expiry status. As the result, within the 4 possible combinations for BIT[15:14], there will be 2 successful and 2 failure START COMMAND status. One of the 2 successful command status will result in a 2-second delay start. The smaller BIT[15:14] value is the correct combination. Since there are only 4 outcomes and the results are ordered, we can simply test 2 START TRANSFER commands with BIT[15:14] combinations 'b00 and 'b01 to deduce the smaller successful combination. Let test0 = test status for combination 'b00 and test1 = test status for 'b01 of BIT[15:14]. The correct combination is as follow: if test0 fails and test1 passes, BIT[15:14] is 'b01 if test0 fails and test1 fails, BIT[15:14] is 'b10 if test0 passes and test1 fails, BIT[15:14] is 'b11 if test0 passes and test1 passes, BIT[15:14] is 'b00 Synopsys STAR 9001202023: Wrong microframe number for isochronous IN endpoints. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: Track DWC_usb31 VERSIONTYPEThinh Nguyen2-0/+11
Add a new field to dwc3 structure to track VERSIONTYPE. The VERSIONTYPE is represented in ASCII in the 32-bit VERSIONTYPE register. In DWC_usb31, sub releases for each version are tracked with VERSIONTYPE such as "ea01" and "ea02". Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: gadget: f_fs: Allow scatter-gather buffersAndrzej Pietrasiewicz1-7/+86
Some protocols implemented in userspace with FunctionFS might require large buffers, e.g. 64kB or more. Currently the said memory is allocated with kmalloc, which might fail should system memory be highly fragmented. On the other hand, some UDC hardware allows scatter-gather operation and this patch takes advantage of this capability: if the requested buffer is larger than PAGE_SIZE and the UDC allows scatter-gather operation, then the buffer is allocated with vmalloc and a scatterlist describing it is created and passed to usb request. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: gadget: f_fs: Add support for CCID descriptors.Vincent Pelletier1-7/+22
Nothing to remap, only check length. Define a minimal structure for CCID descriptor only used to check length. As this descriptor shares the same value as HID descriptors, keep track and compare current interface's class to expected HID and CCID standard values. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: gadget: udc: fix spelling mistake "intrerrupt" -> "interrupt"Colin Ian King1-1/+1
Trivial fix to spelling mistake in comment Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: gadget: uvc: constify vb2_ops structureJulia Lawall1-1/+1
The vb2_ops structure can be const as it is only stored in the ops field of a vb2_queue structure and this field is const. Done with the help of Coccinelle. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc2: gadget: Accept LPM token when TxFIFO is not emptyArtur Petrosyan2-0/+3
Set GLPMCFG_LPM_ACCEPT_CTRL_ISOC bit in GLPMCFG register to accept LPM token during ISOC transfers when TxFIFO is not empty. - Added two definitions. #define GLPMCFG_LPM_ACCEPT_CTRL_CONTROL BIT(21) #define GLPMCFG_LPM_ACCEPT_CTRL_ISOC BIT(22) This patch uses GLPMCFG_LPM_ACCEPT_CTRL_ISOC. GLPMCFG_LPM_ACCEPT_CTRL_CONTROL is defined for further use. - Added setting GLPMCFG_LPM_ACCEPT_CTRL_ISOC bit in GLPMCFG register in dwc2_gadget_init_lpm function. Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc2: gadget: Fix WkupAlert interrupt handler.Artur Petrosyan1-1/+1
According to the databook DCTL_RMTWKUPSIG bit is defined in DCTL register not in DCFG. Updated setting DCTL_RMTWKUPSIG bit to DCTL register. Fixes: 187c5298a122 ("usb: dwc2: gadget: Add handler for WkupAlert interrupt") Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: Set default mode for DWC_usb3 v3.30a and higherThinh Nguyen2-4/+6
DWC_usb31 and DWC_usb3 v3.30a and higher do not support OTG mode. If the controller supports DRD but the dr_mode is not specified or set to OTG, then set the mode to peripheral. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_deviceYoshihiro Shimoda1-5/+10
This patch adds a safety connection way for "forced_b_device" with "workaround_for_vbus" like below: < Example for R-Car E3 Ebisu > # modprobe <any usb gadget driver> # echo 1 > /sys/kernel/debug/ee020000.usb/b_device (connect a usb cable to host side.) # echo 2 > /sys/kernel/debug/ee020000.usb/b_device Previous code should have connected a usb cable before the "b_device" is set to 1 on the Ebisu board. However, if xHCI driver on the board is probed, it causes some troubles: - Conflicts USB VBUS/signals between the board and another host. - "Cannot enable. Maybe the USB cable is bad?" might happen on both the board and another host with a usb hub. - Cannot enumerate a usb gadget correctly because an interruption of VBUS change happens unexpectedly. Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: drd: Add support for DR detection through extconAndy Shevchenko1-0/+10
Allow extcon device, found by name, to provide DR status for USB. This is needed, for example, in case of Intel Merrifield platform, where the Intel Basin Cove PMIC provides an extcon device to communicate the detected role. Note, that the "linux,extcon-name" property name is only for kernel internal use by X86/ACPI platform code and as such is not documented in the device tree bindings. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: drd: Switch to device property for 'extcon' handlingAndy Shevchenko1-2/+3
Switch to device property for 'extcon' handling. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: don't log probe deferrals; but do log other error codesBrian Norris1-1/+2
It's not very useful to repeat a bunch of probe deferral errors. And it's also not very useful to log "failed" without telling the error code. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: gadget: aspeed-vhub: constify usb_gadget_ops structureJulia Lawall1-1/+1
The usb_gadget_ops structure can be const as it is only stored in the ops field of a usb_gadget structure and this field is const. Done with the help of Coccinelle. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: Support option to disable USB2 LPMThinh Nguyen3-1/+8
Support the option to disable USB2 LPM. Set xhci "usb2-lpm-disable" property via "snps,usb2-lpm-disable" property. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: Set GUSB2PHYCFG.ENBLSLPMThinh Nguyen1-0/+2
GUSB2PHYCFG.ENBLSLPM enables the controller to assert low power signals to the PHY. Unless disabled via device property, explicitly set GUSB2PHYCFG.ENBLSLPM as it may not be set by default. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: debugfs: Print/set link state for peripheral modeThinh Nguyen1-0/+13
Current implementation only prints/sets the link state for peripheral mode only. Check and prevent printing bogus link state if the current mode of operation is not peripheral. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: debugfs: Properly print/set link state for HSThinh Nguyen2-2/+46
Highspeed device and below has different state names than superspeed and higher. Add proper checks and printouts of link states for highspeed and below. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: debugfs: Dump internal LSP and ep registersThinh Nguyen2-4/+154
To dump internal LSP and endpoint state debug registers, we must write to GDBGLSPMUX register. This patch correctly dump LSP and endpoint states from the debug registers. If the controller is in device mode, all LSP and endpoint state registers will be dumped via the debugfs attribute "lsp_dump". In host mode, the user has to write the LSP number to "lsp_dump" to dump a specific LSP selection. Fixes: 80b776340c78 ("usb: dwc3: Dump LSP and BMU debug info") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: debugfs: Print eps Tx/RxFIFO in bytesThinh Nguyen1-0/+8
TxFIFO and RxFIFO from GDBGFIFOSPACE are fifo depths in MDWIDTH. Convert them into bytes for easier read. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-26usb: dwc3: debugfs: Properly name Tx/RxFIFOThinh Nguyen2-10/+10
The Tx/RxFIFO types in the GDBGFIFOSPACE.FIFO_QUEUE_SELECT are not queue. Properly rename them. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-22Merge tag 'usb-4.20-rc4' of ↵Linus Torvalds18-55/+162
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 4.20-rc4. There's the usual xhci and dwc2/3 fixes as well as a few minor other issues resolved for problems that have been reported. Full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdc-acm: add entry for Hiro (Conexant) modem usb: xhci: Prevent bus suspend if a port connect change or polling state is detected usb: core: Fix hub port connection events lost usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers" usb: dwc2: pci: Fix an error code in probe usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove() xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc usb: xhci: fix timeout for transition from RExit to U0 usb: xhci: fix uninitialized completion when USB3 port got wrong status xhci: Add check for invalid byte size error when UAS devices are connected. xhci: handle port status events for removed USB3 hcd xhci: Fix leaking USB3 shared_hcd at xhci removal USB: misc: appledisplay: add 20" Apple Cinema Display USB: quirks: Add no-lpm quirk for Raydium touchscreens usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub usb: dwc3: gadget: Properly check last unaligned/zero chain TRB usb: dwc3: core: Clean up ULPI device
2018-11-20usb: cdc-acm: add entry for Hiro (Conexant) modemMaarten Jacobs1-0/+3
The cdc-acm kernel module currently does not support the Hiro (Conexant) H05228 USB modem. The patch below adds the device specific information: idVendor 0x0572 idProduct 0x1349 Signed-off-by: Maarten Jacobs <maarten256@outlook.com> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-15usb: xhci: Prevent bus suspend if a port connect change or polling state is ↵Mathias Nyman1-14/+46
detected USB3 roothub might autosuspend before a plugged USB3 device is detected, causing USB3 device enumeration failure. USB3 devices don't show up as connected and enabled until USB3 link trainig completes. On a fast booting platform with a slow USB3 link training the link might reach the connected enabled state just as the bus is suspending. If this device is discovered first time by the xhci_bus_suspend() routine it will be put to U3 suspended state like the other ports which failed to suspend earlier. The hub thread will notice the connect change and resume the bus, moving the port back to U0 This U0 -> U3 -> U0 transition right after being connected seems to be too much for some devices, causing them to first go to SS.Inactive state, and finally end up stuck in a polling state with reset asserted Fix this by failing the bus suspend if a port has a connect change or is in a polling state in xhci_bus_suspend(). Don't do any port changes until all ports are checked, buffer all port changes and only write them in the end if suspend can proceed Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-15usb: core: Fix hub port connection events lostDennis Wassenberg1-1/+3
This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset only if a device is was attached to the hub port before resetting the hub port. Using a Lenovo T480s attached to the ultra dock it was not possible to detect some usb-c devices at the dock usb-c ports because the hub_port_reset code will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset. Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit. This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the new device was attached such that it was not detected. This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is currently no device attached to the port before the hub port reset. This will avoid clearing the connection bit for new attached devices. Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-15Merge tag 'fixes-for-v4.20-rc2' of ↵Greg Kroah-Hartman5-23/+17
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: For now only 5 small fixes. Most importantly, we have a fix for the TRB type used on unaligned transfers on dwc3. Also a fix for a NULL pointer dereference in dwc3_pci_remove(). Note that a recent commit on ffs was reverted because it causes a regression elsewere. * tag 'fixes-for-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers" usb: dwc2: pci: Fix an error code in probe usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove() usb: dwc3: gadget: Properly check last unaligned/zero chain TRB usb: dwc3: core: Clean up ULPI device
2018-11-14usb: dwc3: gadget: fix ISOC TRB type on unaligned transfersFelipe Balbi1-3/+3
When chaining ISOC TRBs together, only the first ISOC TRB should be of type ISOC_FIRST, all others should be of type ISOC. This patch fixes that. Fixes: c6267a51639b ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-14Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO ↵Shen Jing1-18/+8
transfers" This reverts commit b4194da3f9087dd38d91b40f9bec42d59ce589a8 since it causes list corruption followed by kernel panic: Workqueue: adb ffs_aio_cancel_worker RIP: 0010:__list_add_valid+0x4d/0x70 Call Trace: insert_work+0x47/0xb0 __queue_work+0xf6/0x400 queue_work_on+0x65/0x70 dwc3_gadget_giveback+0x44/0x50 [dwc3] dwc3_gadget_ep_dequeue+0x83/0x2d0 [dwc3] ? finish_wait+0x80/0x80 usb_ep_dequeue+0x1e/0x90 process_one_work+0x18c/0x3b0 worker_thread+0x3c/0x390 ? process_one_work+0x3b0/0x3b0 kthread+0x11e/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 This issue is seen with warm reboot stability testing. Signed-off-by: Shen Jing <jingx.shen@intel.com> Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-14usb: dwc2: pci: Fix an error code in probeDan Carpenter1-0/+1
We added some error handling to this function but forgot to set the error code on this path. Fixes: ecd29dabb2ba ("usb: dwc2: pci: Handle error cleanup in probe") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-14usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove()Kuppuswamy Sathyanarayanan1-1/+3
In dwc3_pci_quirks() function, gpiod lookup table is only registered for baytrail SOC. But in dwc3_pci_remove(), we try to unregistered it without any checks. This leads to NULL pointer de-reference exception in gpiod_remove_lookup_table() when unloading the module for non baytrail SOCs. This patch fixes this issue. Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") Cc: <stable@vger.kernel.org> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-09usb: typec: ucsi: add support for Cypress CCGxAjay Gupta3-0/+319
Latest NVIDIA GPU cards have a Cypress CCGx Type-C controller over I2C interface. This UCSI I2C driver uses I2C bus driver interface for communicating with Type-C controller. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 SocCherian, George3-1/+40
Implement workaround for ThunderX2 Errata-129 (documented in CN99XX Known Issues" available at Cavium support site). As per ThunderX2errata-129, USB 2 device may come up as USB 1 if a connection to a USB 1 device is followed by another connection to a USB 2 device, the link will come up as USB 1 for the USB 2 device. Resolution: Reset the PHY after the USB 1 device is disconnected. The PHY reset sequence is done using private registers in XHCI register space. After the PHY is reset we check for the PLL lock status and retry the operation if it fails. From our tests, retrying 4 times is sufficient. Add a new quirk flag XHCI_RESET_PLL_ON_DISCONNECT to invoke the workaround in handle_xhci_port_status(). Cc: stable@vger.kernel.org Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09usb: xhci: fix timeout for transition from RExit to U0Aaron Ma2-3/+3
This definition is used by msecs_to_jiffies in milliseconds. According to the comments, max rexit timeout should be 20ms. Align with the comments to properly calculate the delay. Verified on Sunrise Point-LP and Cannon Lake. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09usb: xhci: fix uninitialized completion when USB3 port got wrong statusAaron Ma2-2/+2
Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3, after clear port reset it works fine. Since this device is registered on USB3 roothub at boot, when port status reports not superspeed, xhci_get_port_status will call an uninitialized completion in bus_state[0]. Kernel will hang because of NULL pointer. Restrict the USB2 resume status check in USB2 roothub to fix hang issue. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09xhci: Add check for invalid byte size error when UAS devices are connected.Sandeep Singh1-0/+1
Observed "TRB completion code (27)" error which corresponds to Stopped - Length Invalid error(xhci spec section 4.17.4) while connecting USB to SATA bridge. Looks like this case was not considered when the following patch[1] was committed. Hence adding this new check which can prevent the invalid byte size error. [1] ade2e3a xhci: handle transfer events without TRB pointer Cc: <stable@vger.kernel.org> Signed-off-by: Sandeep Singh <sandeep.singh@amd.com> cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09xhci: handle port status events for removed USB3 hcdMathias Nyman1-0/+7
At xhci removal the USB3 hcd (shared_hcd) is removed before the primary USB2 hcd. Interrupts for port status changes may still occur for USB3 ports after the shared_hcd is freed, causing NULL pointer dereference. Check if xhci->shared_hcd is still valid before handing USB3 port events Cc: <stable@vger.kernel.org> Reported-by: Peter Chen <peter.chen@nxp.com> Tested-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09xhci: Fix leaking USB3 shared_hcd at xhci removalMathias Nyman6-8/+14
Ensure that the shared_hcd pointer is valid when calling usb_put_hcd() The shared_hcd is removed and freed in xhci by first calling usb_remove_hcd(xhci->shared_hcd), and later usb_put_hcd(xhci->shared_hcd) Afer commit fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") the shared_hcd was never properly put as xhci->shared_hcd was set to NULL before usb_put_hcd(xhci->shared_hcd) was called. shared_hcd (USB3) is removed before primary hcd (USB2). While removing the primary hcd we might need to handle xhci interrupts to cleanly remove last USB2 devices, therefore we need to set xhci->shared_hcd to NULL before removing the primary hcd to let xhci interrupt handler know shared_hcd is no longer available. xhci-plat.c, xhci-histb.c and xhci-mtk first create both their hcd's before adding them. so to keep the correct reverse removal order use a temporary shared_hcd variable for them. For more details see commit 4ac53087d6d4 ("usb: xhci: plat: Create both HCDs before adding them") Fixes: fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") Cc: Joel Stanley <joel@jms.id.au> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: <stable@vger.kernel.org> Reported-by: Jack Pham <jackp@codeaurora.org> Tested-by: Jack Pham <jackp@codeaurora.org> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07USB: misc: appledisplay: add 20" Apple Cinema DisplayMattias Jacobsson1-0/+1
Add another Apple Cinema Display to the list of supported displays Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07USB: quirks: Add no-lpm quirk for Raydium touchscreensKai-Heng Feng1-0/+5
Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07usb: quirks: Add delay-init quirk for Corsair K70 LUX RGBEmmanuel Pescosta1-0/+3
Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Dmesg output: usb 1-6: string descriptor 0 read error: -110 usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: can't set config #1, error -110 Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hubKai-Heng Feng2-3/+17
Devices connected under Terminus Technology Inc. Hub (1a40:0101) may fail to work after the system resumes from suspend: [ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd [ 206.143691] usb 3-2.4: device descriptor read/64, error -32 [ 206.351671] usb 3-2.4: device descriptor read/64, error -32 Info for this hub: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1a40 ProdID=0101 Rev=01.11 S: Product=USB 2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub Some expirements indicate that the USB devices connected to the hub are innocent, it's the hub itself is to blame. The hub needs extra delay time after it resets its port. Hence wait for extra delay, if the device is connected to this quirky hub. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-06usb: dwc3: gadget: Properly check last unaligned/zero chain TRBThinh Nguyen1-1/+1
Current check for the last extra TRB for zero and unaligned transfers does not account for isoc OUT. The last TRB of the Buffer Descriptor for isoc OUT transfers will be retired with HWO=0. As a result, we won't return early. The req->remaining will be updated to include the BUFSIZ count of the extra TRB, and the actual number of transferred bytes calculation will be wrong. To fix this, check whether it's a short or zero packet and the last TRB chain bit to return early. Fixes: c6267a51639b ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-06usb: dwc3: core: Clean up ULPI deviceAndy Shevchenko1-0/+1
If dwc3_core_init_mode() fails with deferred probe, next probe fails on sysfs with sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/dwc3.0.auto.ulpi' To avoid this failure, clean up ULPI device. Cc: <stable@vger.kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-02Merge branch 'work.afs' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "AFS series, with some iov_iter bits included" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) missing bits of "iov_iter: Separate type from direction and use accessor functions" afs: Probe multiple fileservers simultaneously afs: Fix callback handling afs: Eliminate the address pointer from the address list cursor afs: Allow dumping of server cursor on operation failure afs: Implement YFS support in the fs client afs: Expand data structure fields to support YFS afs: Get the target vnode in afs_rmdir() and get a callback on it afs: Calc callback expiry in op reply delivery afs: Fix FS.FetchStatus delivery from updating wrong vnode afs: Implement the YFS cache manager service afs: Remove callback details from afs_callback_break struct afs: Commit the status on a new file/dir/symlink afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS afs: Don't invoke the server to read data beyond EOF afs: Add a couple of tracepoints to log I/O errors afs: Handle EIO from delivery function afs: Fix TTL on VL server and address lists afs: Implement VL server rotation afs: Improve FS server rotation error handling ...
2018-10-31Merge tag 'media/v4.20-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull new experimental media request API from Mauro Carvalho Chehab: "A new media request API This API is needed to support device drivers that can dynamically change their parameters for each new frame. The latest versions of Google camera and codec HAL depends on such feature. At this stage, it supports only stateless codecs. It has been discussed for a long time (at least over the last 3-4 years), and we finally reached to something that seem to work. This series contain both the API and core changes required to support it and a new m2m decoder driver (cedrus). As the current API is still experimental, the only real driver using it (cedrus) was added at staging[1]. We intend to keep it there for a while, in order to test the API. Only when we're sure that this API works for other cases (like encoders), we'll move this driver out of staging and set the API into a stone. [1] We added support for the vivid virtual driver (used only for testing) to it too, as it makes easier to test the API for the ones that don't have the cedrus hardware" * tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (53 commits) media: dt-bindings: Document the Rockchip VPU bindings media: platform: Add Cedrus VPU decoder driver media: dt-bindings: media: Document bindings for the Cedrus VPU driver media: v4l: Add definition for the Sunxi tiled NV12 format media: v4l: Add definitions for MPEG-2 slice format and metadata media: videobuf2-core: Rework and rename helper for request buffer count media: v4l2-ctrls.c: initialize an error return code with zero media: v4l2-compat-ioctl32.c: add missing documentation for a field media: media-request: update documentation media: media-request: EPERM -> EACCES/EBUSY media: v4l2-ctrls: improve media_request_(un)lock_for_update media: v4l2-ctrls: use media_request_(un)lock_for_access media: media-request: add media_request_(un)lock_for_access media: vb2: set reqbufs/create_bufs capabilities media: videodev2.h: add new capabilities for buffer types media: buffer.rst: only set V4L2_BUF_FLAG_REQUEST_FD for QBUF media: v4l2-ctrls: return -EACCES if request wasn't completed media: media-request: return -EINVAL for invalid request_fds media: vivid: add request support media: vivid: add mc ...
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+0
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: replace free_bootmem{_node} with memblock_freeMike Rapoport1-5/+6
The free_bootmem and free_bootmem_node are merely wrappers for memblock_free. Replace their usage with a call to memblock_free using the following semantic patch: @@ expression e1, e2, e3; @@ ( - free_bootmem(e1, e2) + memblock_free(e1, e2) | - free_bootmem_node(e1, e2, e3) + memblock_free(e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-24-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: replace alloc_bootmem_pages_nopanic with memblock_alloc_nopanicMike Rapoport1-1/+1
The alloc_bootmem_pages_nopanic(size) is a shortcut for __alloc_bootmem_nopanic(size, PAGE_SIZE, BOOTMEM_LOW_LIMIT) which allocates PAGE_SIZE aligned memory. Since BOOTMEM_LOW_LIMIT is hardwired to 0 there is no restrictions on where the allocated memory should reside. The memblock_alloc_nopanic(size, PAGE_SIZE) also allocates PAGE_SIZE aligned memory without any restrictions and thus can be used as a replacement for alloc_bootmem_pages_nopanic() Link: http://lkml.kernel.org/r/1536927045-23536-12-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26Merge tag 'usb-4.20-rc1' of ↵Linus Torvalds94-1649/+4027
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver patches for 4.20-rc1 Lots of USB changes in here, primarily in these areas: - typec updates and new drivers - new PHY drivers - dwc2 driver updates and additions (this old core keeps getting added to new devices.) - usbtmc major update based on the industry group coming together and working to add new features and performance to the driver. - USB gadget additions for new features - USB gadget configfs updates - chipidea driver updates - other USB gadget updates - USB serial driver updates - renesas driver updates - xhci driver updates - other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits) usb: phy: ab8500: silence some uninitialized variable warnings usb: xhci: tegra: Add genpd support usb: xhci: tegra: Power-off power-domains on removal usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten usbip: tools: fix atoi() on non-null terminated string USB: misc: appledisplay: fix backlight update_status return code phy: phy-pxa-usb: add a new driver usb: host: add DT bindings for faraday fotg2 usb: host: ohci-at91: fix request of irq for optional gpio usb/early: remove set but not used variable 'remain_length' usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc usb: typec: tcpm: Report back negotiated PPS voltage and current USB: core: remove set but not used variable 'udev' usb: core: fix memory leak on port_dev_path allocation USB: net2280: Remove ->disconnect() callback from net2280_pullup() usb: dwc2: disable power_down on rockchip devices usb: gadget: udc: renesas_usb3: add support for r8a77990 dt-bindings: usb: renesas_usb3: add bindings for r8a77990 usb: gadget: udc: renesas_usb3: Add r8a774a1 support USB: serial: cypress_m8: remove set but not used variable 'iflag' ...
2018-10-26Merge branch 'linus' of ↵Linus Torvalds1-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove VLA usage - Add cryptostat user-space interface - Add notifier for new crypto algorithms Algorithms: - Add OFB mode - Remove speck Drivers: - Remove x86/sha*-mb as they are buggy - Remove pcbc(aes) from x86/aesni - Improve performance of arm/ghash-ce by up to 85% - Implement CTS-CBC in arm64/aes-blk, faster by up to 50% - Remove PMULL based arm64/crc32 driver - Use PMULL in arm64/crct10dif - Add aes-ctr support in s5p-sss - Add caam/qi2 driver Others: - Pick better transform if one becomes available in crc-t10dif" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: chelsio - Update ntx queue received from cxgb4 crypto: ccree - avoid implicit enum conversion crypto: caam - add SPDX license identifier to all files crypto: caam/qi - simplify CGR allocation, freeing crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static crypto: arm64/aes-blk - ensure XTS mask is always loaded crypto: testmgr - fix sizeof() on COMP_BUF_SIZE crypto: chtls - remove set but not used variable 'csk' crypto: axis - fix platform_no_drv_owner.cocci warnings crypto: x86/aes-ni - fix build error following fpu template removal crypto: arm64/aes - fix handling sub-block CTS-CBC inputs crypto: caam/qi2 - avoid double export crypto: mxs-dcp - Fix AES issues crypto: mxs-dcp - Fix SHA null hashes and output length crypto: mxs-dcp - Implement sha import/export crypto: aegis/generic - fix for big endian systems crypto: morus/generic - fix for big endian systems crypto: lrw - fix rebase error after out of bounds fix crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X. crypto: cavium/nitrox - NITROX command queue changes. ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-13 13:08:46 +0300