summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2018-10-02usb: renesas_usbhs: Add reset_controlYoshihiro Shimoda2-0/+14
R-Car Gen3 needs to deassert resets of both host and peripheral. Since [eo]hci-platform is possible to assert the reset(s) when the probing failed, renesas_usbhs driver doesn't work correctly regardless of finished probing. To fix this issue, this patch adds reset_control on this renesas_usbhs driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc3: gadget: Check ENBLSLPM before sending ep commandThinh Nguyen1-10/+19
When operating in USB 2.0 speeds (HS/FS), if GUSB2PHYCFG.ENBLSLPM or GUSB2PHYCFG.SUSPHY is set, it must be cleared before issuing an endpoint command. Current implementation only save and restore GUSB2PHYCFG.SUSPHY configuration. We must save and clear both GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY settings. Restore them after the command is completed. DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2 Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: fix unbalanced use of external vbus-supplyFabrice Gasnier1-7/+26
When using external vbus supply regulator, it should be enabled synchronously with PWR bit in HPRT register. This also fixes unbalanced use of this optional regulator (This can be reproduced easily when unbinding the driver). Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply") Tested-by: Artur Petrosyan <arturp@synopsys.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: fix call to vbus supply exit routine, call it unlockedFabrice Gasnier1-0/+2
dwc2_vbus_supply_exit() may call regulator_disable(). It shouldn't be called with interrupts disabled as it might sleep. This is seen with DEBUG_ATOMIC_SLEEP=y. Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply") Tested-by: Artur Petrosyan <arturp@synopsys.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: fix a race with external vbus supplyFabrice Gasnier1-1/+9
There's a race with root hub resume, when using external vbus supply. Root hub gets resumed, but runtime pm autosuspend runs as external vbus supply isn't enabled. So, host never exit from power down properly. Initialize vbus external supply before, rater that after hub resume. Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply") Tested-by: Artur Petrosyan <arturp@synopsys.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: get optional vbus-supply regulator onceFabrice Gasnier2-9/+11
Move devm_regulator_get_optional() call to probe routine. This avoids 'vbus-supply' regulator to be requested lots of times, upon each call to dwc2_vbus_supply_init(), e.g. like with runtime pm. Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply") Tested-by: Artur Petrosyan <arturp@synopsys.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc3: add EXTCON dependency for qcomArnd Bergmann1-1/+1
Like the omap back-end, we get a link error with CONFIG_EXTCON=m when building the qcom back-end into the kernel: drivers/usb/dwc3/dwc3-qcom.o: In function `dwc3_qcom_probe': dwc3-qcom.c:(.text+0x13dc): undefined reference to `extcon_get_edev_by_phandle' dwc3-qcom.c:(.text+0x1b18): undefined reference to `devm_extcon_register_notifier' dwc3-qcom.c:(.text+0x1b9c): undefined reference to `extcon_get_state' Do the same thing as OMAP and add an explicit dependency on EXTCON. Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: gadget: udc: atmel: handle at91sam9rl PMCAlexandre Belloni1-0/+2
The at91sam9rl PMC is not quite the same as the at91sam9g45 one and now has its own compatible string. Add support for that. Fixes: 217bace8e548 ("ARM: dts: fix PMC compatible") Acked-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: gadget: udc: fotg210-udc: Fix a sleep-in-atomic-context bug in ↵Jia-Ju Bai1-1/+1
fotg210_get_status() The driver may sleep in an interrupt handler. The function call path (from bottom to top) in Linux-4.17 is: [FUNC] fotg210_ep_queue(GFP_KERNEL) drivers/usb/gadget/udc/fotg210-udc.c, 744: fotg210_ep_queue in fotg210_get_status drivers/usb/gadget/udc/fotg210-udc.c, 768: fotg210_get_status in fotg210_setup_packet drivers/usb/gadget/udc/fotg210-udc.c, 949: fotg210_setup_packet in fotg210_irq (interrupt handler) To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. If possible, spin_unlock() and spin_lock() around fotg210_ep_queue() can be also removed. This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: Disable all EP's on disconnectMinas Harutyunyan1-7/+23
Disabling all EP's allow to reset EP's to initial state. On disconnect disable all EP's instead of just killing all requests. Because of some platform didn't catch disconnect event, same stuff added to dwc2_hsotg_core_init_disconnected() function when USB reset detected on the bus. Changed from version 1: Changed lock acquire flow in dwc2_hsotg_ep_disable() function. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc3: exynos: Add support for Exynos5433 variant with all clocksMarek Szyprowski1-0/+9
DWC3 variant found in Exynos5433 SoCs requires keeping all DRD30/UHOST30 clocks enabled all the time the driver does any access to DWC3 registers, otherwise external abort happens. So far DWC3 hardware module worked with samsung,exynos5250-dwusb3 compatible only by luck when built into kernel: all DRD30 clocks were left enabled by bootloader and later kept enabled by the DRD PHY driver. However, if one tried to use Exnos DWC3 driver as a module or performed system suspend/resume cycle, external abort happened. This patch finally fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc3: exynos: Rework clock handling and prepare for new variantsMarek Szyprowski1-48/+80
Add per-variant list of clocks and manage them all together in the single array. This is a preparation for adding new variants of Exynos SoCs. No functional changes for existing Exynos SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc3: exynos: Remove dead codeMarek Szyprowski1-75/+0
All supported Exynos variants provide respective generic PHY framework based drivers for controlling USB PHYs, so there is no point creating fake USB PHYs based on platform devices. While removing useless code, remove calls to runtime PM, which have no effect. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: phy: mxs: fix spelling mistake "stardard" -> "standard"Colin Ian King1-1/+1
Trivial fix to spelling mistake in dev_dbg message Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: gadget: udc: Remove unnecessary parenthesesNathan Chancellor1-1/+1
Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/usb/gadget/udc/mv_udc_core.c:188:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] while ((curr_dqh->curr_dtd_ptr == curr_dtd->td_dma)) { ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~ drivers/usb/gadget/udc/mv_udc_core.c:188:33: note: remove extraneous parentheses around the comparison to silence this warning while ((curr_dqh->curr_dtd_ptr == curr_dtd->td_dma)) { ~ ^ ~ drivers/usb/gadget/udc/mv_udc_core.c:188:33: note: use '=' to turn this equality comparison into an assignment while ((curr_dqh->curr_dtd_ptr == curr_dtd->td_dma)) { ^~ = 1 warning generated. Link: https://github.com/ClangBuiltLinux/linux/issues/120 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: remove set but unused variableJosh Abraham1-3/+0
This patch removes a set but unused variable in hcd.c. Fixes gcc warning: variable ‘data_fifo’ set but not used [-Wunused-but-set-variable] Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Joshua Abraham <j.abraham1776@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02Revert "usb: renesas_usbhs: add extcon notifier to set mode for non-otg channel"Yoshihiro Shimoda3-21/+0
This reverts commit 8ada211d0383b72878582bd312b984a9eae62b30. R-Car D3 can use OTG mode in fact. So, the commit doesn't need anymore. In other words, like other R-Car Gen3 SoCs, R-Car D3 can change the mode by using the phy-rcar-gen3-usb2 driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: gadget: fix spelling mistakeis "[En]queing" -> "[En]queuing"Colin Ian King2-2/+2
Trivial fix to spelling mistakes in debug warning messages Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02Merge tag 'uvcg-20180925' of git://linuxtv.org/pinchartl/media into testing/nextFelipe Balbi7-558/+740
UVC gadget updates for v4.20 - configfs cleanups, fixes and extensions - Endianness fixes - Miscellaneous cleanups
2018-10-02usb: xhci-mtk: resume USB3 roothub firstChunfeng Yun1-2/+2
Give USB3 devices a better chance to enumerate at USB3 speeds if they are connected to a suspended host. Porting from "671ffdff5b13 xhci: resume USB 3 roothub first" Cc: <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02xhci: Add missing CAS workaround for Intel Sunrise Point xHCIMathias Nyman1-0/+2
The workaround for missing CAS bit is also needed for xHC on Intel sunrisepoint PCH. For more details see: Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02usb: cdc_acm: Do not leak URB buffersRomain Izard1-0/+6
When the ACM TTY port is disconnected, the URBs it uses must be killed, and then the buffers must be freed. Unfortunately a previous refactor removed the code freeing the buffers because it looked extremely similar to the code killing the URBs. As a result, there were many new leaks for each plug/unplug cycle of a CDC-ACM device, that were detected by kmemleak. Restore the missing code, and the memory leak is removed. Fixes: ba8c931ded8d ("cdc-acm: refactor killing urbs") Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02Merge tag 'usb-serial-4.19-rc7' of ↵Greg Kroah-Hartman2-3/+15
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.19-rc7 Here are some device-id patches for 4.19-rc7. Some Quectel modems have a vendor command which can be used to disable certain interfaces in their configurations, but unlike some other modems this also causes the interface numbers to change. These patches allow us to support all such interface permutations at least for the Quectel EP06. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-4.19-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: simple: add Motorola Tetra MTP6550 id USB: serial: option: add two-endpoints device-id flag USB: serial: option: improve Quectel EP06 detection
2018-09-30Merge 4.19-rc6 into usb-nextGreg Kroah-Hartman8-37/+66
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: usbtmc: uninitialized symbol 'actual' in usbtmc_ioctl_abort_bulk_in_tagGuido Kiener1-0/+1
Fix uninitialized symbol 'actual' in function usbtmc_ioctl_abort_bulk_in_tag(). When symbol 'actual' is not initialized and usb_bulk_msg() fails, the subsequent kernel debug message shows invalid data. Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Fixes: cbe743f1333b ("usb: usbtmc: Fix ioctl USBTMC_IOCTL_ABORT_BULK_IN") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: usbtmc: uninitialized symbol 'actual' in usbtmc_ioctl_clearGuido Kiener1-0/+1
Fix uninitialized symbol 'actual' in function usbtmc_ioctl_clear. When symbol 'actual' is not initialized and usb_bulk_msg() fails, the subsequent kernel debug message shows a random value. Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Fixes: dfee02ac4bce ("usb: usbtmc: Fix ioctl USBTMC_IOCTL_CLEAR") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: usbtmc: uninitialized symbol 'actual' in usbtmc_readGuido Kiener1-0/+1
Fix uninitialized symbol 'actual' in function usbtmc_read. When symbol 'actual' is not initialized and usb_bulk_msg() fails, the subsequent kernel debug message shows a random value. Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Fixes: d7604ff0dc01 ("usb: usbtmc: Optimize usbtmc_read") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: usbtmc: Fix memory leak in usbtmc_ioctl_requestGuido Kiener1-4/+0
Kernel memory is allocated twice in new function usbtmc_ioctl_request and creates a memory leak. This fix removes the superfluous kmalloc(). Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Fixes: 658f24f4523e ("usb: usbtmc: Add ioctl for generic requests on control") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: renesas_usbhs: add support for R-Car E3Yoshihiro Shimoda1-0/+4
This patch adds support for R-Car E3. This SoC needs to release the PLL reset by the UGCTRL register like R-Car D3. So, this patch adds a usbhs_of_match entry for this SoC with "USBHS_TYPE_RCAR_GEN3_WITH_PLL". Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: renesas_usbhs: rcar3: Use OTG mode for R-Car D3Yoshihiro Shimoda1-1/+2
Since R-Car D3 can use OTG mode, this patch changes the UGCTRL2 value to UGCTRL2_USB0SEL_OTG and UGCTRL2_VBUSSEL like other R-Car Gen3 SoCs. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28Revert "usb: renesas_usbhs: set the mode by using extcon state for non-otg ↵Yoshihiro Shimoda1-14/+1
channel" This reverts commit cd14247d5c14b9b20bb3d3dfcaa899ca22c8dccc. R-Car D3 can use OTG mode in fact. So, the commit doesn't need anymore. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28Revert "usb: renesas_usbhs: add extcon notifier to set mode for non-otg channel"Yoshihiro Shimoda3-21/+0
This reverts commit 8ada211d0383b72878582bd312b984a9eae62b30. R-Car D3 can use OTG mode in fact. So, the commit doesn't need anymore. In other words, like other R-Car Gen3 SoCs, R-Car D3 can change the mode by using the phy-rcar-gen3-usb2 driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: core: added uevent for over-currentJon Flatley1-0/+36
After commit 1cbd53c8cd85 ("usb: core: introduce per-port over-current counters") usb ports expose a sysfs value 'over_current_count' to user space. This value on its own is not very useful as it requires manual polling. As a solution, fire a udev event from the usb hub device that specifies the values 'OVER_CURRENT_PORT' and 'OVER_CURRENT_COUNT' that indicate the path of the usb port where the over-current event occurred and the value of 'over_current_count' in sysfs. Additionally, call sysfs_notify() so the sysfs value supports poll(). Signed-off-by: Jon Flatley <jflat@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: typec: fusb302: Resolve fixed power role contract setupAdam Thomson1-0/+24
When the controller is configured for a fixed power role (Source only or Sink only), attach does not proceed within the TCPM state machine as there is no CC event generated by this driver to update the CC line status. To rectify this, when CC is configured as Source or Sink we now make use of the hardware's automatic fixed Source or Sink toggling mechanism, which detects attaches in the same way as for DRP toggling. In this way the result of toggling is handled in the same way by the 'fusb302_handle_togdone()' function, and CC events are generated as expected for TCPM allowing a contract to be established. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: typec: fusb302: Correct spelling mistake for toggling stateAdam Thomson1-6/+6
There's a typo in the enum name of the 'OFF' state for toggling (TOGGLINE instead of TOGGLING). This commit resolves that trivial spelling inconsistency. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28xhci: Avoid USB autosuspend when resuming USB2 ports.Anshuman Gupta2-0/+6
When USB bus host controller root hub resumes from autosuspend, it immediately tries to enter auto-suspend, but there can be a scenario when root hub is resuming its usb2 ports, in that particular case USB host controller auto suspend fails since it is busy to resuming its usb2 ports. This makes multiple failed cycles of auto-suspend until all usb2 ports of host controller root hub do not resume. This patch uses USB core framework usb_hcd_start_port_resume, usb_hcd_end_port_resume API's in order to autoresume/autosuspend root hub properly. Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: xhci: tegra: Firmware header is little endianThierry Reding1-26/+26
The XUSB firmware header is in little endian byte order, so make the fields __le32 and __le16 instead of u32 and u16 to avoid warnings from sparse when the fields are used with the endian-aware __le32_to_cpu() and __le16_to_cpu() accessors, respectively. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28xhci-pci: allow host runtime PM as default for Intel Alpine and Titan RidgeMathias Nyman2-0/+25
The xhci controller on Alpine and Titan Ridge keeps the whole thunderbolt awake if the host controller is not allowed tp sleep. This is the case even if no USB devices are connected to the host. Because of this bigger impact, allow runtime pm as default for these xhci controllers in the driver. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28xhci: Use soft retry to recover faster from transaction errorsMathias Nyman2-0/+21
Use soft retry to recover from a USB Transaction Errors that are caused by temporary error conditions. The USB device is not aware that the xHC has halted the endpoint, and will be waiting for another retry A Soft Retry perform additional retries and recover from an error which has caused the xHC to halt an endpoint. Soft retry has some limitations: Soft Retry attempts shall not be performed on Isoch endpoints Soft Retry attempts shall not be performed if the device is behind a TT in a HS Hub Software shall limit the number of unsuccessful Soft Retry attempts to prevent an infinite loop. For more details on Soft retry see xhci specs 4.6.8.1 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: host: xhci-plat: add platform TPL supportPeter Chen1-0/+3
The TPL support is used to identify targeted devices during EH2.0 and EH3.0 certification test, the user can add "tpl-support" at dts to enable this feature. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: xhci-mtk: supports SSP without external USB3 gen2 hubChunfeng Yun1-6/+11
Supports SSP scheduling only for SSP device directly connected to root hub but not through external USB3 gen2 hub which need use a new scheduling way. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: xhci-mtk: supports bandwidth scheduling with multi-TTChunfeng Yun2-10/+258
Supports LowSpeed and FullSpeed INT/ISOC bandwidth scheduling with USB multi-TT Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: xhci-mtk: improve bandwidth schedulingChunfeng Yun2-60/+104
Mainly improve SuperSpeed ISOC bandwidth in last microframe, and LowSpeed/FullSpeed IN INT/ISOC bandwidth in split and idle microframes by introduing a bandwidth budget table; Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: xhci-mtk: fix ISOC error when interval is zeroChunfeng Yun1-1/+3
If the interval equal zero, needn't round up to power of two for the number of packets in each ESIT, so fix it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: xhci-mtk: use maximum ESIT payload of endpiont contextChunfeng Yun1-1/+14
Make use of maximum ESIT payload of endpoint context to calculate the number of packets to send in each ESIT Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: host: Replace empty define with do whileCorentin Labbe6-16/+16
It's dangerous to use empty code define. Furthermore it lead to the following warning: "suggest braces around empty body in an « else » statement" So let's replace emptyness by "do {} while(0)" Furthermore, as suggested by Joe Perches, rename the macro to INCR. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28wusb: Remove VLA usage of skcipherKees Cook1-8/+8
In the quest to remove all stack VLA usage from the kernel[1], this replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(), which uses a fixed stack size. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Johan Hovold <johan@kernel.org> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-26USB: serial: ftdi_sio: implement GPIO support for FT-X devicesKaroly Pados2-2/+385
This patch allows using the CBUS pins of FT-X devices as GPIO in CBUS bitbanging mode. There is no conflict between the GPIO and VCP functionality in this mode. Tested on FT230X and FT231X. As there is no way to request the current CBUS register configuration from the device, all CBUS pins are set to a known state when the first GPIO is requested. This allows using libftdi to set the GPIO pins before loading this module for UART functionality, a behavior that existing applications might be relying upon (though no specific case is known to the authors of this patch). Signed-off-by: Karoly Pados <pados@pados.hu> [ johan: minor style changes ] Signed-off-by: Johan Hovold <johan@kernel.org>
2018-09-25usb: gadget: uvc: configfs: Use %u to print unsigned int valuesLaurent Pinchart1-16/+16
The driver uses the %d format to print unsigned int values. The correct format is %u. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2018-09-25usb: gadget: uvc: configfs: Simplify attributes macrosLaurent Pinchart1-110/+74
Several macros used to define attributes and their access functions take multiple arguments to specify endianness and string conversion functions, based on the size of the attribute. This can be simplified by passing the number of bits explicitly, and constructing the name of the functions internally. The UVCG_OPTS_ATTR macro can be simplified further as all fields it deals with are unsigned int. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 04:22:15 +0300