summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2019-03-14usb: dwc3: exynos: Fix error handling of clk_prepare_enableAlexey Khoroshilov1-2/+2
[ Upstream commit 512e6fb589bc18f9321457632e89b95017447db9 ] If clk_prepare_enable() fails in dwc3_exynos_probe() or in dwc3_exynos_resume(), exynos->clks[0] is left undisabled because of usage preincrement in while condition. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 9f2168367a0a ("usb: dwc3: exynos: Rework clock handling and prepare for new variants") Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-14usb: phy: fix link errorsAnders Roxell1-1/+1
[ Upstream commit f2105d42597f4d10e431b195d69e96dccaf9b012 ] Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is set to module then the following link error occurs. aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl': drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp': drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host': drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp': drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum': drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral': drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine' make[1]: *** [Makefile:1020: vmlinux] Error 1 make[1]: Target 'Image' not remade because of errors. make: *** [Makefile:152: sub-make] Error 2 make: Target 'Image' not remade because of errors. Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-10USB: serial: cp210x: fix GPIO in autosuspendKaroly Pados1-0/+11
commit 7b0b644b9aa2de5032db0f468fddca091d0b7b90 upstream. Current GPIO code in cp210x fails to take USB autosuspend into account, making it practically impossible to use GPIOs with autosuspend enabled without user configuration. Fix this like for ftdi_sio in a previous patch. Tested on a CP2102N. Signed-off-by: Karoly Pados <pados@pados.hu> Fixes: cf5276ce7867 ("USB: serial: cp210x: Adding GPIO support for CP2105") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-10usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCIBalaji Manoharan1-0/+1
commit 8fde481ef3674ae5ad0dbfef4df18ff507c5675a upstream. This fix enables USB role feature on intel commercial nuc platform which is based on Kabylake chipset. Signed-off-by: Balaji Manoharan <m.balaji@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-10xhci: tegra: Prevent error pointer dereferenceThierry Reding1-2/+2
commit 0326ccb5feac6eac35ba6254260e2774277cd976 upstream. During initialization, the host and super-speed power domains will contain an ERR_PTR() encoded error code rather than being NULL. To avoid a crash, use a !IS_ERR_OR_NULL() condition during cleanup. Signed-off-by: Thierry Reding <treding@nvidia.com> Fixes: 6494a9ad86de ("usb: xhci: tegra: Add genpd support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-10USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485Mans Rullgard2-0/+8
commit 8d7fa3d4ea3f0ca69554215e87411494e6346fdc upstream. This adds the USB ID of the Hjelmslund Electronics USB485 Iso stick. Signed-off-by: Mans Rullgard <mans@mansr.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-10USB: serial: cp210x: add ID for Ingenico 3070Ivan Mironov1-0/+1
commit dd9d3d86b08d6a106830364879c42c78db85389c upstream. Here is how this device appears in kernel log: usb 3-1: new full-speed USB device number 18 using xhci_hcd usb 3-1: New USB device found, idVendor=0b00, idProduct=3070 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: Ingenico 3070 usb 3-1: Manufacturer: Silicon Labs usb 3-1: SerialNumber: 0001 Apparently this is a POS terminal with embedded USB-to-Serial converter. Cc: stable@vger.kernel.org Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-10USB: serial: option: add Telit ME910 ECM compositionDaniele Palmas1-0/+2
commit 6431866b6707d27151be381252d6eef13025cfce upstream. This patch adds Telit ME910 family ECM composition 0x1102. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05usb: gadget: Potential NULL dereference on allocation errorDan Carpenter1-1/+1
[ Upstream commit df28169e1538e4a8bcd8b779b043e5aa6524545c ] The source_sink_alloc_func() function is supposed to return error pointers on error. The function is called from usb_get_function() which doesn't check for NULL returns so it would result in an Oops. Of course, in the current kernel, small allocations always succeed so this doesn't affect runtime. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05usb: dwc3: gadget: Fix the uninitialized link_state when udc startsZeng Tao1-0/+1
[ Upstream commit 88b1bb1f3b88e0bf20b05d543a53a5b99bd7ceb6 ] Currently the link_state is uninitialized and the default value is 0(U0) before the first time we start the udc, and after we start the udc then stop the udc, the link_state will be undefined. We may have the following warnings if we start the udc again with an undefined link_state: WARNING: CPU: 0 PID: 327 at drivers/usb/dwc3/gadget.c:294 dwc3_send_gadget_ep_cmd+0x304/0x308 dwc3 100e0000.hidwc3_0: wakeup failed --> -22 [...] Call Trace: [<c010f270>] (unwind_backtrace) from [<c010b3d8>] (show_stack+0x10/0x14) [<c010b3d8>] (show_stack) from [<c034a4dc>] (dump_stack+0x84/0x98) [<c034a4dc>] (dump_stack) from [<c0118000>] (__warn+0xe8/0x100) [<c0118000>] (__warn) from [<c0118050>](warn_slowpath_fmt+0x38/0x48) [<c0118050>] (warn_slowpath_fmt) from [<c0442ec0>](dwc3_send_gadget_ep_cmd+0x304/0x308) [<c0442ec0>] (dwc3_send_gadget_ep_cmd) from [<c0445e68>](dwc3_ep0_start_trans+0x48/0xf4) [<c0445e68>] (dwc3_ep0_start_trans) from [<c0446750>](dwc3_ep0_out_start+0x64/0x80) [<c0446750>] (dwc3_ep0_out_start) from [<c04451c0>](__dwc3_gadget_start+0x1e0/0x278) [<c04451c0>] (__dwc3_gadget_start) from [<c04452e0>](dwc3_gadget_start+0x88/0x10c) [<c04452e0>] (dwc3_gadget_start) from [<c045ee54>](udc_bind_to_driver+0x88/0xbc) [<c045ee54>] (udc_bind_to_driver) from [<c045f29c>](usb_gadget_probe_driver+0xf8/0x140) [<c045f29c>] (usb_gadget_probe_driver) from [<bf005424>](gadget_dev_desc_UDC_store+0xac/0xc4 [libcomposite]) [<bf005424>] (gadget_dev_desc_UDC_store [libcomposite]) from[<c023d8e0>] (configfs_write_file+0xd4/0x160) [<c023d8e0>] (configfs_write_file) from [<c01d51e8>] (__vfs_write+0x1c/0x114) [<c01d51e8>] (__vfs_write) from [<c01d5ff4>] (vfs_write+0xa4/0x168) [<c01d5ff4>] (vfs_write) from [<c01d6d40>] (SyS_write+0x3c/0x90) [<c01d6d40>] (SyS_write) from [<c0107400>] (ret_fast_syscall+0x0/0x3c) Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05usb: dwc3: gadget: synchronize_irq dwc irq in suspendBo He1-0/+2
[ Upstream commit 01c10880d24291a96a4ab0da773e3c5ce4d12da8 ] We see dwc3 endpoint stopped by unwanted irq during suspend resume test, which is caused dwc3 ep can't be started with error "No Resource". Here, add synchronize_irq before suspend to sync the pending IRQ handlers complete. Signed-off-by: Bo He <bo.he@intel.com> Signed-off-by: Yu Wang <yu.y.wang@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12usb: gadget: musb: fix short isoc packets with inventra dmaPaul Elder2-22/+12
commit c418fd6c01fbc5516a2cd1eaf1df1ec86869028a upstream. Handling short packets (length < max packet size) in the Inventra DMA engine in the MUSB driver causes the MUSB DMA controller to hang. An example of a problem that is caused by this problem is when streaming video out of a UVC gadget, only the first video frame is transferred. For short packets (mode-0 or mode-1 DMA), MUSB_TXCSR_TXPKTRDY must be set manually by the driver. This was previously done in musb_g_tx (musb_gadget.c), but incorrectly (all csr flags were cleared, and only MUSB_TXCSR_MODE and MUSB_TXCSR_TXPKTRDY were set). Fixing that problem allows some requests to be transferred correctly, but multiple requests were often put together in one USB packet, and caused problems if the packet size was not a multiple of 4. Instead, set MUSB_TXCSR_TXPKTRDY in dma_controller_irq (musbhsdma.c), just like host mode transfers. This topic was originally tackled by Nicolas Boichat [0] [1] and is discussed further at [2] as part of his GSoC project [3]. [0] https://groups.google.com/forum/?hl=en#!topic/beagleboard-gsoc/k8Azwfp75CU [1] https://gitorious.org/beagleboard-usbsniffer/beagleboard-usbsniffer-kernel/commit/b0be3b6cc195ba732189b04f1d43ec843c3e54c9?p=beagleboard-usbsniffer:beagleboard-usbsniffer-kernel.git;a=patch;h=b0be3b6cc195ba732189b04f1d43ec843c3e54c9 [2] http://beagleboard-usbsniffer.blogspot.com/2010/07/musb-isochronous-transfers-fixed.html [3] http://elinux.org/BeagleBoard/GSoC/USBSniffer Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Bin Liu <b-liu@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12usb: gadget: udc: net2272: Fix bitwise and boolean operationsGustavo A. R. Silva1-1/+1
commit 07c69f1148da7de3978686d3af9263325d9d60bd upstream. (!x & y) strikes again. Fix bitwise and boolean operations by enclosing the expression: intcsr & (1 << NET2272_PCI_IRQ) in parentheses, before applying the boolean operator '!'. Notice that this code has been there since 2011. So, it would be helpful if someone can double-check this. This issue was detected with the help of Coccinelle. Fixes: ceb80363b2ec ("USB: net2272: driver for PLX NET2272 USB device controller") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12usb: dwc3: gadget: Handle 0 xfer length for OUT EPTejas Joglekar1-1/+1
commit 1e19cdc8060227b0802bda6bc0bd22b23679ba32 upstream. For OUT endpoints, zero-length transfers require MaxPacketSize buffer as per the DWC_usb3 programming guide 3.30a section 4.2.3.3. This patch fixes this by explicitly checking zero length transfer to correctly pad up to MaxPacketSize. Fixes: c6267a51639b ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: stable@vger.kernel.org Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12usb: phy: am335x: fix race condition in _probeBin Liu1-4/+1
commit a53469a68eb886e84dd8b69a1458a623d3591793 upstream. power off the phy should be done before populate the phy. Otherwise, am335x_init() could be called by the phy owner to power on the phy first, then am335x_phy_probe() turns off the phy again without the caller knowing it. Fixes: 2fc711d76352 ("usb: phy: am335x: Enable USB remote wakeup using PHY wakeup") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12usb: musb: dsps: fix runtime pm for peripheral modeBin Liu1-3/+9
[ Upstream commit 54578ee883e34d2d1c518d48f1c1e2dd3f387188 ] Since the runtime PM support was added in musb, dsps relies on the timer calling otg_timer() to activate the usb subsystem. However the driver doesn't enable the timer for peripheral port, then the peripheral port is unable to be enumerated by a host if the other usb port is disabled or in peripheral mode too. So let's start the timer for peripheral port too. Fixes: ea2f35c01d5e ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12usb: musb: dsps: fix otg state machineBin Liu1-2/+7
[ Upstream commit 6010abf2c2c0e382d7e8ee44bd11f343aae90cce ] Due to lack of ID pin interrupt event on AM335x devices, the musb dsps driver uses polling to detect usb device attach for dual-role port. But in the case if a micro-A cable adapter is attached without a USB device attached to the cable, the musb state machine gets stuck in a_wait_vrise state waiting for the MUSB_CONNECT interrupt which won't happen due to the usb device is not attached. The state is stuck in a_wait_vrise even after the micro-A cable is detached, which could cause VBUS retention if then the dual-role port is attached to a host port. To fix the problem, make a_wait_vrise as a transient state, then move the state to either a_wait_bcon for host port or a_idle state for dual-role port, if no usb device is attached to the port. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12usb: renesas_usbhs: add support for RZ/G2EFabrizio Castro1-0/+4
[ Upstream commit 1d6e81a288e28d8d0e38e0501a324216f79bba35 ] HS-USB found in RZ/G2E (a.k.a. r8a774c0) is very similar to the one found in R-Car E3 (a.k.a. r8a77990), as it needs to release the PLL reset by the UGCTRL register like R-Car E3, therefore add r8a774c0 support in a similar fashion to what was done for the r8a77990. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12usb: dwc3: gadget: Disable CSP for stream OUT epTejas Joglekar1-2/+6
[ Upstream commit 244add8ebfb231c39db9e33b204bd0ce8f24f782 ] In stream mode, when fast-forwarding TRBs, the stream number is not cleared causing the new stream to not get assigned. So we don't want controller to carry on transfers when short packet is received. So disable the CSP for stream capable endpoint. This is based on the 3.30a Programming guide, where table 3-1 device descriptor structure field definitions says for CSP bit If this bit is 0, the controller generates an XferComplete event and remove the stream. So if we keep CSP as 1 then switching between streams would not happen as in stream mode, when fast-forwarding TRBs, the stream number is not cleared causing the new stream to not get assigned. Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12usb: dwc3: trace: add missing break statement to make compiler happyAndy Shevchenko1-0/+2
[ Upstream commit 54d48183d21e03f780053d7129312049cb5dd591 ] The missed break statement in the outer switch makes the code fall through always and thus always same value will be printed. Besides that, compiler warns about missed fall through marker: drivers/usb/dwc3/./trace.h: In function ‘trace_raw_output_dwc3_log_trb’: drivers/usb/dwc3/./trace.h:246:4: warning: this statement may fall through [-Wimplicit-fallthrough=] switch (pcm) { ^~~~~~ Add the missing break statement to work correctly without compilation warnings. Fixes: fa8d965d736b ("usb: dwc3: trace: pretty print high-bandwidth transfers too") Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)Chunfeng Yun2-5/+7
[ Upstream commit a0678e2eed41e81004308693ac84ea95614b0920 ] Fix the issue: device doesn't accept LGO_U1/U2: 1. set SW_U1/U2_ACCEPT_ENABLE to eanble controller to accept LGO_U1/U2 by default; 2. enable/disable controller to initiate requests for transition into U1/U2 by SW_U1/U2_REQUEST_ENABLE instead of SW_U1/U2_ACCEPT_ENABLE; Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12usb: hub: delay hub autosuspend if USB3 port is still link trainingMathias Nyman1-0/+10
[ Upstream commit e86108940e541febf35813402ff29fa6f4a9ac0b ] When initializing a hub we want to give a USB3 port in link training the same debounce delay time before autosuspening the hub as already trained, connected enabled ports. USB3 ports won't reach the enabled state with "current connect status" and "connect status change" bits set until the USB3 link training finishes. Catching the port in link training (polling) and adding the debounce delay prevents unnecessary failed attempts to autosuspend the hub. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12usb: dwc2: Disable power down feature on Samsung SoCsMarek Szyprowski1-1/+9
[ Upstream commit 35a6054132286a4ab92b536595093b82e6bdfcbc ] Power down feature of DWC2 module integrated in Samsung SoCs doesn't work properly or needs some additional handling in PHY or SoC glue layer, so disable it for now. Without disabling power down, DWC2 causes random memory trashes and fails enumeration if there is no USB link to host on driver probe. Fixes: 03ea6d6e9e1ff1 ("usb: dwc2: Enable power down") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()Anurag Kumar Vulisha1-3/+3
[ Upstream commit b7a4fbe2300a8965ea760c7e871507b84aea17f6 ] Availability of TRB's is calculated using dwc3_calc_trbs_left(), which determines total available TRB's based on the HWO bit set in a TRB. In the present code, __dwc3_prepare_one_trb() is called with a TRB which needs to be prepared for transfer. This __dwc3_prepare_one_trb() calls dwc3_calc_trbs_left() to determine total available TRBs and set IOC bit if the total available TRBs are zero. Since the present working TRB (which is passed as an argument to __dwc3_prepare_one_trb() ) doesn't yet have the HWO bit set before calling dwc3_calc_trbs_left(), there are chances that dwc3_calc_trbs_left() wrongly calculates this present working TRB as free(since the HWO bit is not yet set) and returns the total available TRBs as greater than zero (including the present working TRB). This could be a problem. This patch corrects the above mentioned problem in __dwc3_prepare_one_trb() by increementing the dep->trb_enqueue at the last (after preparing the TRB) instead of increementing at the start and setting the IOC bit only if the total available TRBs returned by dwc3_calc_trbs_left() is 1 . Since we are increementing the dep->trb_enqueue at the last, the present working TRB is also considered as available by dwc3_calc_trbs_left() and non zero value is returned . So, according to the modified logic, when the total available TRBs is equal to 1 that means the total available TRBs in the pool are 0. Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> Reviewed-by: Thinh Nguyen <thinhn@synopsys.com> Tested-by: Tejas Joglekar <tejas.joglekar@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-31usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanupJack Pham1-0/+2
commit bd6742249b9ca918565e4e3abaa06665e587f4b5 upstream. OUT endpoint requests may somtimes have this flag set when preparing to be submitted to HW indicating that there is an additional TRB chained to the request for alignment purposes. If that request is removed before the controller can execute the transfer (e.g. ep_dequeue/ep_disable), the request will not go through the dwc3_gadget_ep_cleanup_completed_request() handler and will not have its needs_extra_trb flag cleared when dwc3_gadget_giveback() is called. This same request could be later requeued for a new transfer that does not require an extra TRB and if it is successfully completed, the cleanup and TRB reclamation will incorrectly process the additional TRB which belongs to the next request, and incorrectly advances the TRB dequeue pointer, thereby messing up calculation of the next requeust's actual/remaining count when it completes. The right thing to do here is to ensure that the flag is cleared before it is given back to the function driver. A good place to do that is in dwc3_gadget_del_and_unmap_request(). Fixes: c6267a51639b ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: stable@vger.kernel.org Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> [jackp: backport to <= 4.20: replaced 'needs_extra_trb' with 'unaligned' and 'zero' members in patch and reworded commit text] Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31USB: serial: pl2303: add new PID to support PL2303TBCharles Yeh2-0/+3
commit 4dcf9ddc9ad5ab649abafa98c5a4d54b1a33dabb upstream. Add new PID to support PL2303TB (TYPE_HX) Signed-off-by: Charles Yeh <charlesyeh522@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31USB: serial: simple: add Motorola Tetra TPG2200 device idMax Schulze1-1/+2
commit b81c2c33eab79dfd3650293b2227ee5c6036585c upstream. Add new Motorola Tetra device id for Motorola Solutions TETRA PEI device T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9016 Rev=24.16 S: Manufacturer=Motorola Solutions, Inc. S: Product=TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple Signed-off-by: Max Schulze <max.schulze@posteo.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31USB: serial: ftdi_sio: fix GPIO not working in autosuspendKaroly Pados1-1/+14
commit a8eda9fa1bd84065b75bfa81bf675a7af9055478 upstream. There is a bug in the current GPIO code for ftdi_sio: it failed to take USB autosuspend into account. If the device is in autosuspend, calls to usb_control_msg() fail with -EHOSTUNREACH. Because the standard value for autosuspend timeout is usually 2-5 seconds, this made it almost impossible to use the GPIOs on machines that have USB autosuspend enabled. This patch fixes the issue by acquiring a PM lock on the device for the duration of the USB transfers. Tested on an FT231X device. Signed-off-by: Karoly Pados <pados@pados.hu> [ johan: simplify code somewhat ] Fixes: ba93cc7da896 ("USB: serial: ftdi_sio: implement GPIO support for FT-X devices") Cc: stable <stable@vger.kernel.org> # 4.20 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLELubomir Rintel1-0/+1
commit 70d0ba4cf79a0e73485b22d955991c6f27257376 upstream. This fixes autoloading the module by the OF compatible string. Fixes: 813e18b18a87 ("USB: EHCI: ehci-mv: add DT support") Cc: stable@vger.kernel.org Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31USB: leds: fix regression in usbport led triggerChristian Lamparter1-7/+10
commit 91f7d2e89868fcac0e750a28230fdb1ad4512137 upstream. The patch "usb: simplify usbport trigger" together with "leds: triggers: add device attribute support" caused an regression for the usbport trigger. it will no longer enumerate any active usb hub ports under the "ports" directory in the sysfs class directory, if the usb host drivers are fully initialized before the usbport trigger was loaded. The reason is that the usbport driver tries to register the sysfs entries during the activate() callback. And this will fail with -2 / ENOENT because the patch "leds: triggers: add device attribute support" made it so that the sysfs "ports" group was only being added after the activate() callback succeeded. This version of the patch reverts parts of the "usb: simplify usbport trigger" patch and restores usbport trigger's functionality. Fixes: 6f7b0bad8839 ("usb: simplify usbport trigger") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-26usb: dwc2: Fix disable all EP's on disconnectMinas Harutyunyan1-18/+23
[ Upstream commit 4fe4f9fecc36956fd53c8edf96dd0c691ef98ff9 ] Disabling all EP's allow to reset EP's to initial state. Introduced new function dwc2_hsotg_ep_disable_lock() which before calling dwc2_hsotg_ep_disable() function acquire hsotg->lock and release on exiting. From dwc2_hsotg_ep_disable() function removed acquiring hsotg->lock. In dwc2_hsotg_core_init_disconnected() function when USB reset interrupt asserted disabling all ep’s by dwc2_hsotg_ep_disable() function. This updates eliminating sparse imbalance warnings. Reverted changes in dwc2_hostg_disconnect() function. Introduced new function dwc2_hsotg_ep_disable_lock(). Changed dwc2_hsotg_ep_ops. Now disable point to dwc2_hsotg_ep_disable_lock() function. In functions dwc2_hsotg_udc_stop() and dwc2_hsotg_suspend() dwc2_hsotg_ep_disable() function replaced by dwc2_hsotg_ep_disable_lock() function. In dwc2_hsotg_ep_disable() function removed acquiring of hsotg->lock. Fixes: dccf1bad4be7 ("usb: dwc2: Disable all EP's on disconnect") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-26usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_deviceYoshihiro Shimoda1-5/+10
[ Upstream commit ceb94bc52c437463f0903e61060a94a2226fb672 ] This patch adds a safety connection way for "forced_b_device" with "workaround_for_vbus" like below: < Example for R-Car E3 Ebisu > # modprobe <any usb gadget driver> # echo 1 > /sys/kernel/debug/ee020000.usb/b_device (connect a usb cable to host side.) # echo 2 > /sys/kernel/debug/ee020000.usb/b_device Previous code should have connected a usb cable before the "b_device" is set to 1 on the Ebisu board. However, if xHCI driver on the board is probed, it causes some troubles: - Conflicts USB VBUS/signals between the board and another host. - "Cannot enable. Maybe the USB cable is bad?" might happen on both the board and another host with a usb hub. - Cannot enumerate a usb gadget correctly because an interruption of VBUS change happens unexpectedly. Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-26usb: typec: tcpm: Do not disconnect link for self powered devicesBadhri Jagan Sridharan1-2/+10
[ Upstream commit 23b5f73266e59a598c1e5dd435d87651b5a7626b ] During HARD_RESET the data link is disconnected. For self powered device, the spec is advising against doing that. >From USB_PD_R3_0 7.1.5 Response to Hard Resets Device operation during and after a Hard Reset is defined as follows: Self-powered devices Should Not disconnect from USB during a Hard Reset (see Section 9.1.2). Bus powered devices will disconnect from USB during a Hard Reset due to the loss of their power source. Tackle this by letting TCPM know whether the device is self or bus powered. This overcomes unnecessary port disconnections from hard reset. Also, speeds up the enumeration time when connected to Type-A ports. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> --------- Version history: V3: Rebase on top of usb-next V2: Based on feedback from heikki.krogerus@linux.intel.com - self_powered added to the struct tcpm_port which is populated from a. "connector" node of the device tree in tcpm_fw_get_caps() b. "self_powered" node of the tcpc_config in tcpm_copy_caps Based on feedbase from linux@roeck-us.net - Code was refactored - SRC_HARD_RESET_VBUS_OFF sets the link state to false based on self_powered flag V1 located here: https://lkml.org/lkml/2018/9/13/94 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-17USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGBJack Stocker1-1/+2
commit 3483254b89438e60f719937376c5e0ce2bc46761 upstream. To match the Corsair Strafe RGB, the Corsair K70 RGB also requires USB_QUIRK_DELAY_CTRL_MSG to completely resolve boot connection issues discussed here: https://github.com/ckb-next/ckb-next/issues/42. Otherwise roughly 1 in 10 boots the keyboard will fail to be detected. Patch that applied delay control quirk for Corsair Strafe RGB: cb88a0588717 ("usb: quirks: add control message delay for 1b1c:1b20") Previous K70 RGB patch to add delay-init quirk: 7a1646d92257 ("Add delay-init quirk for Corsair K70 RGB keyboards") Signed-off-by: Jack Stocker <jackstocker.93@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17USB: storage: add quirk for SMI SM3350Icenowy Zheng1-0/+12
commit 0a99cc4b8ee83885ab9f097a3737d1ab28455ac0 upstream. The SMI SM3350 USB-UFS bridge controller cannot handle long sense request correctly and will make the chip refuse to do read/write when requested long sense. Add a bad sense quirk for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17USB: storage: don't insert sane sense for SPC3+ when bad sense specifiedIcenowy Zheng1-2/+6
commit c5603d2fdb424849360fe7e3f8c1befc97571b8c upstream. Currently the code will set US_FL_SANE_SENSE flag unconditionally if device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to prevent this behavior, because SMI SM3350 UFS-USB bridge controller, which claims SPC4, will show strange behavior with 96-byte sense (put the chip into a wrong state that cannot read/write anything). Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on SPC4+ devices. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17usb: cdc-acm: send ZLP for Telit 3G Intel based modemsDaniele Palmas1-0/+7
commit 34aabf918717dd14e05051896aaecd3b16b53d95 upstream. Telit 3G Intel based modems require zero packet to be sent if out data size is equal to the endpoint max packet size. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-17usbcore: Select only first configuration for non-UAC3 compliant devicesSaranya Gopal1-3/+6
commit ff2a8c532c14fd22fb26a36574d9ff199afbbe54 upstream. In most of the UAC1 and UAC2 audio devices, the first configuration is most often the best configuration. However, with recent patch to support UAC3 configuration, second configuration was unintentionally chosen for some of the UAC1/2 devices that had more than one configuration. This was because of the existing check after the audio config check which selected any config which had a non-vendor class. This patch fixes this issue. Fixes: f13912d3f014 ("usbcore: Select UAC3 configuration for audio if present") Reported-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Tested-by: Con Kolivas <kernel@kolivas.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader.Macpaul Lin2-0/+11
commit eafb27fa5283599ce6c5492ea18cf636a28222bb upstream. Mediatek Preloader is a proprietary embedded boot loader for loading Little Kernel and Linux into device DRAM. This boot loader also handle firmware update. Mediatek Preloader will be enumerated as a virtual COM port when the device is connected to Windows or Linux OS via CDC-ACM class driver. When the USB enumeration has been done, Mediatek Preloader will send out handshake command "READY" to PC actively instead of waiting command from the download tool. Since Linux 4.12, the commit "tty: reset termios state on device registration" (93857edd9829e144acb6c7e72d593f6e01aead66) causes Mediatek Preloader receiving some abnoraml command like "READYXX" as it sent. This will be recognized as an incorrect response. The behavior change also causes the download handshake fail. This change only affects subsequent connects if the reconnected device happens to get the same minor number. By disabling the ECHO termios flag could avoid this problem. However, it cannot be done by user space configuration when download tool open /dev/ttyACM0. This is because the device running Mediatek Preloader will send handshake command "READY" immediately once the CDC-ACM driver is ready. This patch wants to fix above problem by introducing "DISABLE_ECHO" property in driver_info. When Mediatek Preloader is connected, the CDC-ACM driver could disable ECHO flag in termios to avoid the problem. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09usb: roles: Add a description for the class to KconfigHeikki Krogerus5-6/+16
commit c3788cd9963eb2e77de3c24142fb7c67b61f1a26 upstream. That makes the USB role switch support option visible and selectable for the user. The class driver is also moved to drivers/usb/roles/ directory. This will fix an issue that we have with the Intel USB role switch driver on systems that don't have USB Type-C connectors: Intel USB role switch driver depends on the USB role switch class as it should, but since there was no way for the user to enable the USB role switch class, there was also no way to select that driver. USB Type-C drivers select the USB role switch class which makes the Intel USB role switch driver available and therefore hides the problem. So in practice Intel USB role switch driver was depending on USB Type-C drivers. Fixes: f6fb9ec02be1 ("usb: roles: Add Intel xHCI USB role switch driver") Cc: <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"Stephan Gerhold1-4/+4
commit 3004cfd6204927c1294060b849029cf0c2651074 upstream. Commit 211f658b7b40 ("usb: dwc3: pci: Use devm functions to get the phy GPIOs") changed the code to claim the PHY GPIOs permanently for Intel Baytrail devices. This causes issues when the actual PHY driver attempts to claim the same GPIO descriptors. For example, tusb1210 now fails to probe with: tusb1210: probe of dwc3.0.auto.ulpi failed with error -16 (EBUSY) dwc3-pci needs to turn on the PHY once before dwc3 is loaded, but usually the PHY driver will then hold the GPIOs to turn off the PHY when requested (e.g. during suspend). To fix the problem, this reverts the commit to restore the old behavior to put the GPIOs immediately after usage. Link: https://www.spinics.net/lists/linux-usb/msg174681.html Cc: stable@vger.kernel.org Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09usb: dwc2: disable power_down on Amlogic devicesMartin Blumenstingl1-0/+1
commit cc10ce0c51b13d1566d0ec1dcb472fb86330b391 upstream. Disable power_down by setting the parameter to DWC2_POWER_DOWN_PARAM_NONE. This fixes a problem on various Amlogic Meson SoCs where USB devices are only recognized when plugged in before booting Linux. A hot-plugged USB device was not detected even though the device got power (my USB thumb drive for example has an LED which lit up). A similar fix was implemented for Rockchip SoCs in commit c216765d3a1def ("usb: dwc2: disable power_down on rockchip devices"). That commit suggests that a change in the dwc2 driver is the cause because the default value for the "hibernate" parameter (which then got renamed to "power_down" to support other modes) was changed in the v4.17 merge window with: commit 6d23ee9caa6790 ("Merge tag 'usb-for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing"). Cc: <stable@vger.kernel.org> # 4.19 Acked-by: Minas Harutyunyan <hminas@synopsys.com> Suggested-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09usb: r8a66597: Fix a possible concurrency use-after-free bug in ↵Jia-Ju Bai1-1/+4
r8a66597_endpoint_disable() commit c85400f886e3d41e69966470879f635a2b50084c upstream. The function r8a66597_endpoint_disable() and r8a66597_urb_enqueue() may be concurrently executed. The two functions both access a possible shared variable "hep->hcpriv". This shared variable is freed by r8a66597_endpoint_disable() via the call path: r8a66597_endpoint_disable kfree(hep->hcpriv) (line 1995 in Linux-4.19) This variable is read by r8a66597_urb_enqueue() via the call path: r8a66597_urb_enqueue spin_lock_irqsave(&r8a66597->lock) init_pipe_info enable_r8a66597_pipe pipe = hep->hcpriv (line 802 in Linux-4.19) The read operation is protected by a spinlock, but the free operation is not protected by this spinlock, thus a concurrency use-after-free bug may occur. To fix this bug, the spin-lock and spin-unlock function calls in r8a66597_endpoint_disable() are moved to protect the free operation. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09USB: serial: option: add Fibocom NL678 seriesJörgen Storvist1-0/+4
commit 4b2c01ad902ec02fa962b233decd2f14be3714ba upstream. Added USB serial option driver support for Fibocom NL678 series cellular module: VID 2cb7 and PIDs 0x0104 and 0x0105. Reserved network and ADB interfaces. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0104 Rev=03.10 S: Manufacturer=Fibocom S: Product=Fibocom NL678-E Modem S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0105 Rev=03.10 S: Manufacturer=Fibocom S: Product=Fibocom NL678-E Modem S: SerialNumber=12345678 C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displaysScott Chen2-0/+10
commit 8d503f206c336677954160ac62f0c7d9c219cd89 upstream. Add device ids to pl2303 for the HP POS pole displays: LM920: 03f0:026b TD620: 03f0:0956 LD960TA: 03f0:4439 LD220TA: 03f0:4349 LM940: 03f0:5039 Signed-off-by: Scott Chen <scott@labau.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09usb: dwc2: host: use hrtimer for NAK retriesTerin Stock2-8/+13
commit 6ed30a7d8ec29d3aba46e47aa8b4a44f077dda4e upstream. Modify the wait delay utilize the high resolution timer API to allow for more precisely scheduled callbacks. A previous commit added a 1ms retry delay after multiple consecutive NAKed transactions using jiffies. On systems with a low timer interrupt frequency, this delay may be significantly longer than specified, resulting in misbehavior with some USB devices. This scenario was reached on a Raspberry Pi 3B with a Macally FDD-USB floppy drive (identified as 0424:0fdc Standard Microsystems Corp. Floppy, based on the USB97CFDC USB FDC). With the relay delay, the drive would be unable to mount a disk, replying with NAKs until the device was reset. Using ktime, the delta between starting the timer (in dwc2_hcd_qh_add) and the callback function can be determined. With the original delay implementation, this value was consistently approximately 12ms. (output in us). <idle>-0 [000] ..s. 1600.559974: dwc2_wait_timer_fn: wait_timer delta: 11976 <idle>-0 [000] ..s. 1600.571974: dwc2_wait_timer_fn: wait_timer delta: 11977 <idle>-0 [000] ..s. 1600.583974: dwc2_wait_timer_fn: wait_timer delta: 11976 <idle>-0 [000] ..s. 1600.595974: dwc2_wait_timer_fn: wait_timer delta: 11977 After converting the relay delay to using a higher resolution timer, the delay was much closer to 1ms. <idle>-0 [000] d.h. 1956.553017: dwc2_wait_timer_fn: wait_timer delta: 1002 <idle>-0 [000] d.h. 1956.554114: dwc2_wait_timer_fn: wait_timer delta: 1002 <idle>-0 [000] d.h. 1957.542660: dwc2_wait_timer_fn: wait_timer delta: 1004 <idle>-0 [000] d.h. 1957.543701: dwc2_wait_timer_fn: wait_timer delta: 1002 The floppy drive operates properly with delays up to approximately 5ms, and sends NAKs for any delays that are longer. Fixes: 38d2b5fb75c1 ("usb: dwc2: host: Don't retry NAKed transactions right away") Cc: <stable@vger.kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Terin Stock <terin@terinstock.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-17USB: xhci: fix 'broken_suspend' placement in struct xchi_hcdNicolas Saenz Julienne1-2/+2
As commented in the struct's definition there shouldn't be anything underneath its 'priv[0]' member as it would break some macros. The patch converts the broken_suspend into a bit-field and relocates it next to to the rest of bit-fields. Fixes: a7d57abcc8a5 ("xhci: workaround CSS timeout on AMD SNPS 3.0 xHC") Reported-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-14Merge tag 'usb-serial-4.20-rc7' of ↵Greg Kroah-Hartman1-1/+15
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 4.20-rc7 Here are some new modem device ids. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-4.20-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit LN940 series USB: serial: option: add Fibocom NL668 series USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode) USB: serial: option: add GosunCn ZTE WeLink ME3630 USB: serial: option: add HP lt4132
2018-12-14xhci: Don't prevent USB2 bus suspend in state check intended for USB3 onlyMathias Nyman1-1/+2
The code to prevent a bus suspend if a USB3 port was still in link training also reacted to USB2 port polling state. This caused bus suspend to busyloop in some cases. USB2 polling state is different from USB3, and should not prevent bus suspend. Limit the USB3 link training state check to USB3 root hub ports only. The origial commit went to stable so this need to be applied there as well Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13USB: serial: option: add Telit LN940 seriesJörgen Storvist1-0/+4
Added USB serial option driver support for Telit LN940 series cellular modules. Covering both QMI and MBIM modes. usb-devices output (0x1900): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1900 Rev=03.10 S: Manufacturer=Telit S: Product=Telit LN940 Mobile Broadband S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option usb-devices output (0x1901): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 20 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1901 Rev=03.10 S: Manufacturer=Telit S: Product=Telit LN940 Mobile Broadband S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 02:28:00 +0300