summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)AuthorFilesLines
2013-06-10USB: pl2303: fix device initialisation at openJohan Hovold1-5/+5
Do not use uninitialised termios data to determine when to configure the device at open. This also prevents stack data from leaking to userspace in the OOM error path. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-10USB: spcp8x5: fix device initialisation at openJohan Hovold1-6/+4
Do not use uninitialised termios data to determine when to configure the device at open. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-10USB: f81232: fix device initialisation at openJohan Hovold1-4/+4
Do not use uninitialised termios data to determine when to configure the device at open. This also prevents stack data from leaking to userspace. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06USB: option,zte_ev: move most ZTE CDMA devices to zte_evDan Williams2-26/+22
Per some ZTE Linux drivers I found for the AC2716, the following patch moves most ZTE CDMA devices from option to zte_ev. The blacklist stuff that option does is not required with zte_ev, because it doesn't implement any of the send_setup hooks which the blacklist suppressed. I did not move the 2718 over because I could not find any ZTE Linux drivers for that device, nor even any Windows drivers. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06USB: option: blacklist network interface on Huawei E1820Bjørn Mork1-0/+2
The mode used by Windows for the Huawei E1820 will use the same ff/ff/ff class codes for both serial and network functions. Reported-by: Graham Inggs <graham.inggs@uct.ac.za> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06USB: whiteheat: fix broken port configurationJohan Hovold1-1/+1
When configuring the port (e.g. set_termios) the port minor number rather than the port number was used in the request (and they only coincide for minor number 0). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-05USB: serial: fix TIOCMIWAIT return valueJohan Hovold1-3/+1
Fix regression introduced by commit 143d9d9616 ("USB: serial: add tiocmiwait subdriver operation") which made the ioctl operation return ENODEV rather than ENOIOCTLCMD when a subdriver TIOCMIWAIT implementation is missing. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04USB: mos7720: fix hardware flow controlJohan Hovold1-1/+1
The register access to enable hardware flow control depends on the device port number and not the port minor number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04USB: keyspan: remove unused endpoint-array accessJohan Hovold1-10/+0
Remove the no longer used endpoint-array access completely. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04USB: keyspan: fix bogus array indexJohan Hovold1-1/+1
The outcont_endpoints array was indexed using the port minor number (which can be greater than the array size) rather than the device port number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04USB: zte_ev: fix broken openJohan Hovold1-6/+0
Remove bogus port-number check in open and close, which prevented this driver from being used with a minor number different from zero. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03USB: serial: Add Option GTM681W to qcserial device table.Richard Weinberger1-0/+1
The Option GTM681W uses a qualcomm chip and can be served by the qcserial device driver. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03USB: Serial: cypress_M8: Enable FRWD Dongle hidcom deviceRobert Butora2-1/+21
The patch adds a new HIDCOM device and does not affect other devices driven by the cypress_M8 module. Changes are: - add VendorID ProductID to device tables - skip unstable speed check because FRWD uses 115200bps - skip reset at probe which is an issue workaround for this particular device. Signed-off-by: Robert Butora <robert.butora.fi@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-29USB: zte_ev: fix control-message timeoutsJohan Hovold1-14/+14
The control-message timeout is specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-29USB: mos7720: fix message timeoutsJohan Hovold1-3/+3
The control and bulk-message timeouts are specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-29USB: iuu_phoenix: fix bulk-message timeoutJohan Hovold1-2/+2
The bulk-message timeout is specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-29USB: ark3116: fix control-message timeoutJohan Hovold1-1/+1
The control-message timeout is specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-29USB: mos7840: fix DMA to stackJohan Hovold1-8/+27
Fix regression introduced by commit 0eafe4de1a ("USB: serial: mos7840: add support for MCS7810 devices") which used stack-allocated buffers for control messages. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-29USB: mos7720: fix DMA to stackJohan Hovold1-3/+14
The read_mos_reg function is called with stack-allocated buffers, which must not be used for control messages. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-29USB: visor: fix initialisation of Treo/Kyocera devicesJohan Hovold1-0/+8
Fix regression introduced by commit 214916f2e ("USB: visor: reimplement using generic framework") which broke initialisation of Treo/Kyocera devices that re-mapped bulk-in endpoints. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-29USB: serial: fix Treo/Kyocera interrrupt-in urb contextJohan Hovold1-0/+1
The first and second interrupt-in urbs are swapped for some Treo/Kyocera devices, but the urb context was never updated with the new port. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: ftdi_sio: Add support for Newport CONEX motor driversGomella, Andrew (NIH/NHLBI) [F]2-0/+4
Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by: Andrew Gomella <andrew.gomella@nih.gov> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN cardDan Williams1-0/+2
A rebranded Novatel E371 for AT&T's LTE bands. Cc: stable <stable@vger.kernel.org> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: serial: clean up chars_in_bufferJohan Hovold1-9/+2
No need to grab disconnect mutex in chars_in_buffer now that no sub-driver is or should be querying hardware buffers anymore. (They should use wait_until_sent.) Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: ti_usb_3410_5052: fix chars_in_buffer overheadJohan Hovold1-8/+15
Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 2c992cd73 ("USB: ti_usb_3410_5052: query hardware-buffer status in chars_in_buffer") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: io_ti: fix chars_in_buffer overheadJohan Hovold1-8/+14
Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 263e1f9f ("USB: io_ti: query hardware-buffer status in chars_in_buffer") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: ftdi_sio: fix chars_in_buffer overheadJohan Hovold1-14/+5
Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 6f602912 ("usb: serial: ftdi_sio: Add missing chars_in_buffer function") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Reported-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: ftdi_sio: clean up get_modem_statusJohan Hovold1-5/+4
Use usb-serial port rather than tty as argument to get_modem_status. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: serial: add generic wait_until_sent implementationJohan Hovold2-0/+33
Add generic wait_until_sent implementation which polls for empty hardware buffers using the new port-operation tx_empty. The generic implementation will be used for all sub-drivers that implement tx_empty but does not define wait_until_sent. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: serial: add wait_until_sent operationJohan Hovold1-0/+17
Add wait_until_sent operation which can be used to wait for hardware buffers to drain. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: Blacklisted Cinterion's PLxx WWAN InterfaceSchemmel Hans-Christoph1-4/+5
/drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN Interface (USB Interface 4), because it will be handled by QMI WWAN driver. Product IDs renamed. Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17usb: option: Add Telewell TW-LTE 4GTeppo Kotilainen1-0/+2
Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by: Teppo Kotilainen <qubit303@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-29Merge tag 'usb-3.10-rc1' of ↵Linus Torvalds41-1974/+885
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB pull request for 3.10-rc1. Lots of USB patches here, the majority being USB gadget changes and USB-serial driver cleanups, the rest being ARM build fixes / cleanups, and individual driver updates. We also finally got some chipidea fixes, which have been delayed for a number of kernel releases, as the maintainer has now reappeared. All of these have been in linux-next for a while" * tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits) USB: ehci-msm: USB_MSM_OTG needs USB_PHY USB: OHCI: avoid conflicting platform drivers USB: OMAP: ISP1301 needs USB_PHY USB: lpc32xx: ISP1301 needs USB_PHY USB: ftdi_sio: enable two UART ports on ST Microconnect Lite usb: phy: tegra: don't call into tegra-ehci directly usb: phy: phy core cannot yet be a module USB: Fix initconst in ehci driver usb-storage: CY7C68300A chips do not support Cypress ATACB USB: serial: option: Added support Olivetti Olicard 145 USB: ftdi_sio: correct ST Micro Connect Lite PIDs ARM: mxs_defconfig: add CONFIG_USB_PHY ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY usb: phy: remove exported function from __init section usb: gadget: zero: put function instances on unbind usb: gadget: f_sourcesink.c: correct a copy-paste misnomer usb: gadget: cdc2: fix error return code in cdc_do_config() usb: gadget: multi: fix error return code in rndis_do_config() usb: gadget: f_obex: fix error return code in obex_bind() USB: storage: convert to use module_usb_driver() ...
2013-04-24USB: ftdi_sio: enable two UART ports on ST Microconnect LiteAdrian Thomasset1-7/+11
The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports. The first two ports are reserved for the JTAG interface. We enable by default ports 2 and 3 as UARTs (where port 2 is a conventional RS-232 UART) Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23USB: serial: option: Added support Olivetti Olicard 145Filippo Turato1-0/+2
This adds PID for Olivetti Olicard 145 in option.c Signed-off-by: Filippo Turato <nnj7585@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23USB: ftdi_sio: correct ST Micro Connect Lite PIDsAdrian Thomasset2-2/+5
The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB UART FTDI chip. It is also possible to drive STM reference targets populated with an on-board JTAG debugger based on the FT2232H chip with the same STMicroelectronics tools. For this reason, the ST Micro Connect Lite PIDs should be ST_STMCLT_2232_PID: 0x3746 ST_STMCLT_4232_PID: 0x3747 Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: kill custom closing_waitJohan Hovold1-54/+15
Kill custom closing_wait implementation and let the tty-layer handle it instead. Note that the port drain-delay is set to three characters to keep the 20ms delay after wait_until_sent at low baudrates (1200 baud) during close. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: remove redundant drain from break_ctlJohan Hovold1-2/+0
Remove redundant drain, which has already been handled by the tty-layer, from break_ctl. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: query hardware-buffer status in chars_in_bufferJohan Hovold1-0/+8
Query hardware-buffer status in chars_in_buffer should the write fifo be empty. This is needed to make the tty layer wait for hardware buffers to drain on close. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: remove lsr from port dataJohan Hovold1-7/+7
The line status register is only polled so let's not keep a possibly outdated value in the port data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: ti_usb_3410_5052: move write-fifo flushing to closeJohan Hovold1-9/+8
Move write-fifo flushing from ti_drain to close where it belongs. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: io_ti: remove redundant wait_until_sentJohan Hovold1-2/+0
Remove redundant wait_until_sent, which has already been handled by the tty-layer, from break_ctl. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19USB: io_ti: fix TIOCGSERIALJohan Hovold1-1/+1
Fix regression introduced by commit f40d78155 ("USB: io_ti: kill custom closing_wait implementation") which made TIOCGSERIAL return the wrong value for closing_wait. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> # 3.9 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: symbolserial: move private-data allocation to port_probeJohan Hovold1-11/+19
Allocate port-private data in port-probe rather than in attach. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: symbolserial: remove unused private dataJohan Hovold1-5/+1
Use port device for debug messages in interrupt-urb callback and remove unused private data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: symbolserial: use port interrupt-in urbJohan Hovold1-90/+12
Use the port interrupt-in urb rather managing a private one. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: mct_u232: clean up read implementationJohan Hovold1-26/+11
The device uses the second interrupt-in endpoint of the interface for reading. Stop abusing the port read urb and store a pointer to the second interrupt-in urb as port-private data instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: kobil_sct: use port interrupt-out urbJohan Hovold1-67/+8
Use the port interrupt-out urb rather than abusing the port write_urb pointer and allocating a new urb at every open (but the first...). Note that the write_urb abuse would have led to a double free should there ever be interfaces with a bulk-out endpoint. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: kobil_sct: remove unused endpoint addressJohan Hovold1-8/+0
Remove unused interrupt-in endpoint address from private data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17USB: kobil_sct: fix broken debug codeJohan Hovold1-18/+2
Replace broken and commented-out debug code with usb_serial_debug_data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-14 14:19:26 +0300