summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/pl2303.c
AgeCommit message (Collapse)AuthorFilesLines
2008-12-17USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole displayMike Provencher1-0/+1
Add id for the Hewlett-Packard LD220-HP POS pole display. Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard Signed-off-by: Mike Provencher <mike.provencher@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: add 5372:2303 to pl2303Matthew Arnold1-0/+1
This patch adds the "Superial" USB-Serial converter to pl2303 so that it is detected, by the correct driver. Adds the relevant vendor:product (5372:2303) to the device tables in pl2303.c & pl2303.h. The patch has been tested against 2.6.24-22-generic. Signed-off-by: Matthew D Arnold <matthew.arnold-1@uts.edu.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-18USB: remove info() macro from usb/serial driversGreg Kroah-Hartman1-1/+1
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-13tty: usb-serial krefsAlan Cox1-2/+2
Use kref in the USB serial drivers so that we don't free tty structures from under the URB receive handlers as has historically been the case if you were unlucky. This also gives us a framework for general tty drivers to use tty_port objects and refcount. Contains two err->dev_err changes merged together to fix clashes in the -next tree. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13usb: fix pl2303 initializationJason Wessel1-11/+0
This patch removes the private check for the termios_initialized for the pl2303 usb driver. It forced the baud to 9600 on the first call to pl2303_set_termios() Based on the tty changes in the 2.6.27 kernel, the termios passed to the *_set_termios functions is always populated the first time. This means there is no need to privately initialize the settings the first time, and doing so will not allow the use of the kernel parameter "console=ttyUSB0,115200" as an example. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-14USB: pl2023: Remove USB id (4348:5523) handled by ch341Tollef Fog Heen1-1/+0
USB ID 4348:5523 is handled by the ch341 driver. Remove it from the pl2023 driver. Reverts 002e8f2c80c6be76bb312940bc278fc10b2b2487. Signed-off-by: Tollef Fog Heen <tfheen@err.no> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-23tty-usb-pl2303: Coding styleAlan Cox1-28/+36
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23usb_serial: API all changeAlan Cox1-35/+41
USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04USB: add a pl2303 device idGreg Kroah-Hartman1-0/+1
As reported by Ken A Scott <kscott9@sent.com> Cc: Ken A Scott <kscott9@sent.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-30USB: pl2303: another product IDSteve Murphy1-0/+1
I've just got a USB GPRS/EDGE modem branded Manufacturer Micromax Model MMX610U (see http://www.airtel.in/level2_t3data.aspx?path=1/106/179) working by adding another product ID to pl2303. Modem info reports same module as Max Arnold's i.e.SIMCOM SIM600 but with product ID 0x0612 (cf Ox0611). From: Steve Murphy <steve@gnusis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-21usb-serial: Use ftdi_sio driver for RATOC REX-USB60FAtsushi Nemoto1-1/+0
This patch reverts 57833ea6b95a3995149f1f6d1a8d8862ab7a0ba2 ("usb-serial: pl2303: add support for RATOC REX-USB60F") and adds support for the device to ftdi_sio driver. Cc: Akira Tsukamoto <akirat@rd.scei.sony.co.jp> Cc: stable <stable@kernel.org> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-25USB: remove unnecessary type casting of urb->contextMing Lei1-3/+3
urb->context code cleanup Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-25usb serial: more fixes and groundwork for tty changesAlan Cox1-0/+2
- If a termios change fails due to lack of memory we should copy the old settings back over as the device has not changed - Note various locking problems - kl5kusb105 had various remaining tty flag handling problems - Make safe_serial use tty_insert_flip_string not open coded loops - set termios speed properly in usb_serial Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-25USB: replace remaining __FUNCTION__ occurrencesHarvey Harrison1-53/+53
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-25USB: serial: remove unneeded number endpoints settingsGreg Kroah-Hartman1-3/+0
The usb-serial core no longer checks these fields so remove them from all of the individual drivers. They will be removed from the usb-serial core in a patch later in the series. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-25USB: pl2303: another product IDMax Arnold1-0/+1
Device like this http://aldiga.com/english/A-100-USB-EDGE10.htm contains Prolific 2303 chip. Actually their site a bit outdated - I have AlDiga AL-11U GSM/GPRS/EDGE modem and it works with pl2303 module after adding corresponding product ID. By default modem uses baud rate 460800. GSM chipset - SIMCom SIM600, quad band 850/900/1800/1900 MHz Device info: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=067b ProdID=0611 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303 E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Max Arnold <lwarxx@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02USB: last abuses of intfdata in close for usb-serial driversOliver Neukum1-1/+1
these drivers abused intfdata in close() as flags for binding. That races with reprobing of those devices. This patch fixes that by using the flag and the locks introduced with the patch against mos7720. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02USB: pl2303: Add autosuspend support to pl2303 usb serial converter.Sarah Sharp1-0/+3
Signed-off-by: Sarah Sharp <saharabeara@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02USB: pl2303: Move pl2303 vendor specific init to probe function.Sarah Sharp1-25/+24
Without this fix, the pl2303 usb-serial adapter would not suspend properly unless it had been opened first. A pl2303 type_1 chip will still break if the system is hibernated while the RS-232 connector is powered by another system. This was broken before, and a reset resume does not fix it. All other suspend and autosuspend scenarios work with ATEN pl2303 adaptors with HX and type_1 chips. Signed-off-by: Sarah Sharp <saharabeara@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02USB: pl2303: Cleanup FISH and SOUP macros in pl2303 driver.Sarah Sharp1-39/+39
Replace the FISH and SOUP macros that violated the macro guidelines in CodingStyle. Turn them into function calls with clearer variable names. Signed-off-by: Sarah Sharp <saharabeara@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02USB: pl2303: add support for RATOC REX-USB60FAkira Tsukamoto1-0/+1
pl2303: add support for RATOC REX-USB60F This patch adds support for RATOC REX-USB60F Serial Adapters, which is widely used in Japan recently. Cc: stable <stable@kernel.org> Signed-off-by: Akira Tsukamoto <akirat@rd.scei.sony.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02USB: remove duplicate entry in Option driver and Pl2303 driver for Huawei modemDaniel Kozák1-1/+0
Remove entry for Huawei E620 UMTS/HSDPA card (ID: 12d1:1001) in pl2303 driver Option driver is use instead Cc: stable <stable@kernel.org> Signed-off-by: Daniel Kozák <kozzi11@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02USB: Adding YC Cable USB Serial device to pl2303Damien Stuart1-0/+1
This simply adds the "YC Cable" as a vendor and its pl2303-based USB<->Serial adapter as a product. This particular adapter is sold by Radio Shack. I've done limited testing on a few different systems with no issues. Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02USB: add support for 4348:5523 WinChipHead USB->RS 232 adapterPiotr Roszatycki1-0/+1
add support for: 4348:5523 WinChipHead USB->RS 232 adapter with Prolifec PL 2303 chipset [ mingo@elte.hu: merged it and nursed it upstream ] Cc: stable <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-09pl2303: Fix mode switching regressionAlan Cox1-0/+7
Cleaning out all the incorrect 'no change made' checks for termios settings showed up a problem with the PL2303. The hardware here seems to lose sync and bits if you tell it to make no changes. This shows up with a real world application. To fix this the driver check for meaningful hardware changes is restored but doing the tests correctly and as a tty layer function so it doesn't get duplicated wrongly everywhere if other drivers turn out to need it. Signed-off-by: Alan Cox <alan@redhat.com> Tested-by: Mirko Parthey <mirko.parthey@informatik.tu-chemnitz.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29USB: pl2303: add support for Corega CG-USBRS232RMagnus Damm1-0/+1
pl2303: add support for Corega CG-USBRS232R This patch adds support for Corega CG-USBRS232R Serial Adapters. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25usb: serial/pl2303: support for IO Data Device RSAQ5Masakazu Mokuno1-0/+1
This patch adds support for the IO Data Device USB-RSAQ5, PL2303 based USB-serial converter, to pl2303 driver Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-25USB: pl2303: remove can't happen checks, set speed properly and report baud rateAlan Cox1-5/+6
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-13usb: serial/pl2303: support for BenQ Siemens Mobile Phone EF81Andreas Loibl1-0/+1
This patch adds support for the BenQ Mobile Phone EF81 to pl2303 Signed-off-by: Andreas Loibl <andreas@andreas-loibl.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-13USB: pl2303: remove bogus checks and fix speed support to use ↵Alan Cox1-32/+1
tty_get_baud_rate() Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-13USB: serial: pl2303: clean up urb->status usageGreg Kroah-Hartman1-20/+22
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-13USB: fix up license wording on some of my usb-serial driversGreg Kroah-Hartman1-4/+4
Also update the copyright date on the pl2303 driver, as it was out of date. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-13USB: flow control fix for pl2303t.sefzick1-0/+7
in order to be able to switch back to 'flow-control none' after having activated 'flow-control rts/cts', I made a small change to 'pl2303.c'. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-17USB: PL2303: Willcom WS002IN Support.YOSHIFUJI Hideaki1-0/+1
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-08USB serial: add driver pointer to all usb-serial driversJohannes Hölzl1-0/+1
Every usb serial driver should have a pointer to the corresponding usb driver. So the usb serial core can add a new id not only to the usb serial driver, but also to the usb driver. Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag no_dynamic_id=1. This is added now. Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-13[PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day1-1/+1
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] tty: switch to ktermiosAlan Cox1-2/+2
This is the grungy swap all the occurrences in the right places patch that goes with the updates. At this point we have the same functionality as before (except that sgttyb() returns speeds not zero) and are ready to begin turning new stuff on providing nobody reports lots of bugs If you are a tty driver author converting an out of tree driver the only impact should be termios->ktermios name changes for the speed/property setting functions from your upper layers. If you are implementing your own TCGETS function before then your driver was broken already and its about to get a whole lot more painful for you so please fix it 8) Also fill in c_ispeed/ospeed on init for most devices, although the current code will do this for you anyway but I'd like eventually to lose that extra paranoia [akpm@osdl.org: bluetooth fix] [mp3@de.ibm.com: sclp fix] [mp3@de.ibm.com: warning fix for tty3270] [hugh@veritas.com: fix tty_ioctl powerpc build] [jdike@addtoit.com: uml: fix ->set_termios declaration] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Acked-by: Peter Oberparleiter <oberpar@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells1-3/+3
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-29USB: Add vendor / product ID to pl2303Wesley PA4WDH1-0/+1
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27usb serial: support Alcor Micro Corp. USB 2.0 TO RS-232 through pl2303 driverJohannes Steingraeber1-0/+1
Patch to add support for Alcor Micro Corp. USB 2.0 TO RS-232 converter. This patch adds VID and PID to pl2303.[ch], adds it to the "HORRIBLE HACK FOR PL2303" in usb-serial.c and also prevents cdc-acm to claim driving this device by blacklisting it in hid-core. Signed-off-by: Johannes Steingraeber <Jo_Stein@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: pl2303: cosmetic changes to quirkThiago Galesi1-6/+13
Cosmetic changes to quirk in pl2303_update_line_status Signed-off-by: Thiago Galesi <thiagogalesi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: pl2303: reduce number of prototypesThiago Galesi1-301/+269
Reduce number of needed prototypes in Prolific pl2303 driver Signed-off-by: Thiago Galesi <thiagogalesi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: pl2303: cosmetic changes to pl2303_buf_{clear, data_avail}Thiago Galesi1-6/+6
Changes the functions pl2303_buf_clear and pl2303_buf_data_avail for the purpose of keeping them under the 80 column limit, making them more similar to similar functions and making then simpler. Signed-off-by: Thiago Galesi <thiagogalesi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: pl2303: remove 80-columns limit violations in pl2303 driverThiago Galesi1-129/+123
Fixes several lines that overrun 80 columns in Prolific pl2303 driver and cleans up some space usages in the function calls. Signed-off-by: Thiago Galesi <thiagogalesi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: pl2303: Removes unneeded goto.Luiz Fernando N. Capitulino1-4/+1
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-27[PATCH] USB: pl2303: removed support for OTi's DKU-5 clone cableTomasz Kazmierczak1-1/+0
This patch removes support for a clone of Nokia DKU-5 cable made by Ours Technology Inc, as it turned out that the cable does not use the pl2303 chip, but OTI-6858 chip which is not compatible with the pl2303. Signed-off-by: Tomasz Kazmierczak <tomek.fizyk@op.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-03USB: New USB ID for Belkin Serial AdapterKim Oldfield1-0/+1
Can you add the USB IDs for the Belkin USB Serial adapter (P/N F5U257) to the pl2303 driver in the Linux Kernel? Are you the appropriate person to approach for this? I recently purchased a Belkin USB Serial adapter (P/N F5U257) and found that it didn't work. After a bit of experimentation I found that it works with the pl2303 driver once the ID has been added. See attached patch to fix this. Also attached is the output from lsusb -v just in case you require any information from there. From: Kim Oldfield <luv@oldfield.wattle.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-13[PATCH] USB: move usb-serial.h to include/linux/usb/Greg Kroah-Hartman1-1/+1
USB serial outside of the kernel tree can not build properly due to usb-serial.h being buried down in the source tree. This patch moves the location of the file to include/linux/usb and fixes up all of the usb serial drivers to handle the move properly. Cc: Sergei Organov <osv@javad.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-13[PATCH] USB: Support for Susteen Datapilot Universal-2 cable in pl2303Matthew Meno1-0/+1
The Susteen Datapilot cable (http://www.susteen.com/productdetail/71/producthl/Notempty) has an internal pl2303 to communicate with a set of dummy connector-ends that connect to a variety of cell phones. I've found that it works right out of the box by simply adding the product/vendor id to the pl2303 driver. Signed-off-by: Matt Meno <mmeno@idealcorp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-13[PATCH] USB: Addition of vendor/product id pair for pl2303 driverPeter Moulder1-0/+1
Text from the back of the box, for your information/amusement: USB DATA CABLE FOR K700 Series The USB Cable is an ideal link between your mobile phone and PC. Employing the user-friendiy [sic] USB standard,its capacity for rapid data transfer enables functions such as synchronization of phone book and calendar,as well as Internet browsing via a modem-enabled phone.Autual [sic] connection speed is dependent on phone capacity. MADE IN CHINA From: Peter Moulder <Peter.Moulder@infotech.monash.edu.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-26 01:27:07 +0300