summaryrefslogtreecommitdiff
path: root/drivers/usb/renesas_usbhs
AgeCommit message (Collapse)AuthorFilesLines
2016-09-24usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS conditionYoshihiro Shimoda1-2/+9
commit 519d8bd4b5d3d82c413eac5bb42b106bb4b9ec15 upstream. The previous driver is possible to stop the transfer wrongly. For example: 1) An interrupt happens, but not BRDY interruption. 2) Read INTSTS0. And than state->intsts0 is not set to BRDY. 3) BRDY is set to 1 here. 4) Read BRDYSTS. 5) Clear the BRDYSTS. And then. the BRDY is cleared wrongly. Remarks: - The INTSTS0.BRDY is read only. - If any bits of BRDYSTS are set to 1, the BRDY is set to 1. - If BRDYSTS is 0, the BRDY is set to 0. So, this patch adds condition to avoid such situation. (And about NRDYSTS, this is not used for now. But, avoiding any side effects, this patch doesn't touch it.) Fixes: d5c6a1e024dd ("usb: renesas_usbhs: fixup interrupt status clear method") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe()Wei Yongjun1-1/+1
commit 3295235fd70ed6d594aadee8c892a14f6a4b2d2e upstream. In case of error, the function usb_get_phy() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS") Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07usb: renesas_usbhs: Use dmac only if the pipe type is bulkYoshihiro Shimoda1-2/+2
commit 700aa7ff8d2c2b9cc669c99375e2ccd06d3cd38d upstream. This patch fixes an issue that isochronous transfer's data is possible to be lost as a workaround. Since this driver uses a workqueue to start the dmac, the transfer is possible to be delayed when system load is high. Fixes: 6e4b74e4690d ("usb: renesas: fix scheduling in atomic context bug") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07usb: renesas_usbhs: clear the BRDYSTS in usbhsg_ep_enable()Yoshihiro Shimoda1-2/+5
commit 9ab967e6db7412b675ecbff80d5371d53c82cb2e upstream. This patch fixes an issue that unexpected BRDY interruption happens when the usb_ep_{enable,disable}() are called with different direction. In this case, the driver will cause the following message: renesas_usbhs e6590000.usb: irq_ready run_error 1 : -16 This issue causes the followings: 1) A pipe is enabled as transmission 2) The pipe sent a data 3) The pipe is disabled and re-enabled as reception. 4) The pipe got a queue Since the driver doesn't clear the BRDYSTS flags after 2) above, the issue happens. If we add such clearing the flags into the driver, the code will become complicate. So, this patch clears the BRDYSTS flag of reception in usbhsg_ep_enable() to avoid complicate. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20usb: renesas_usbhs: fix NULL pointer dereference in xfer_work()Yoshihiro Shimoda1-4/+14
commit 4fdef698383db07d829da567e0e405fc41ff3a89 upstream. This patch fixes an issue that the xfer_work() is possible to cause NULL pointer dereference if the usb cable is disconnected while data transfer is running. In such case, a gadget driver may call usb_ep_disable()) before xfer_work() is actually called. In this case, the usbhs_pkt_pop() will call usbhsf_fifo_unselect(), and then usbhs_pipe_to_fifo() in xfer_work() will return NULL. Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20usb: renesas_usbhs: protect the CFIFOSEL setting in usbhsg_ep_enable()Yoshihiro Shimoda1-1/+8
commit 15e4292a2d21e9997fdb2b8c014cc461b3f268f0 upstream. This patch fixes an issue that the CFIFOSEL register value is possible to be changed by usbhsg_ep_enable() wrongly. And then, a data transfer using CFIFO may not work correctly. For example: # modprobe g_multi file=usb-storage.bin # ifconfig usb0 192.168.1.1 up (During the USB host is sending file to the mass storage) # ifconfig usb0 down In this case, since the u_ether.c may call usb_ep_enable() in eth_stop(), if the renesas_usbhs driver is also using CFIFO for mass storage, the mass storage may not work correctly. So, this patch adds usbhs_lock() and usbhs_unlock() calling in usbhsg_ep_enable() to protect CFIFOSEL register. This is because: - CFIFOSEL.CURPIPE = 0 is also needed for the pipe configuration - The CFIFOSEL (fifo->sel) is already protected by usbhs_lock() Fixes: 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20usb: renesas_usbhs: fix to avoid using a disabled ep in usbhsg_queue_done()Yoshihiro Shimoda1-1/+5
commit 4fccb0767fdbdb781a9c5b5c15ee7b219443c89d upstream. This patch fixes an issue that usbhsg_queue_done() may cause kernel panic when dma callback is running and usb_ep_disable() is called by interrupt handler. (Especially, we can reproduce this issue using g_audio with usb-dmac driver.) For example of a flow: usbhsf_dma_complete (on tasklet) --> usbhsf_pkt_handler (on tasklet) --> usbhsg_queue_done (on tasklet) *** interrupt happened and usb_ep_disable() is called *** --> usbhsg_queue_pop (on tasklet) Then, oops happened. Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transferYoshihiro Shimoda1-0/+1
commit 6490865c67825277b29638e839850882600b48ec upstream. This patch adds a code to surely disable TX IRQ of the pipe before starting TX DMAC transfer. Otherwise, a lot of unnecessary TX IRQs may happen in rare cases when DMAC is used. Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler()Yoshihiro Shimoda1-1/+2
commit 894f2fc44f2f3f48c36c973b1123f6ab298be160 upstream. When unexpected situation happened (e.g. tx/rx irq happened while DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL pointer dereference like the followings: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: usb_f_acm u_serial g_serial libcomposite CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty #63 Hardware name: Generic R8A7790 (Flattened Device Tree) task: c0729c00 ti: c0724000 task.ti: c0724000 PC is at 0x0 LR is at usbhsf_pkt_handler+0xac/0x118 pc : [<00000000>] lr : [<c03257e0>] psr: 60000193 sp : c0725db8 ip : 00000000 fp : c0725df4 r10: 00000001 r9 : 00000193 r8 : ef3ccab4 r7 : ef3cca10 r6 : eea4586c r5 : 00000000 r4 : ef19ceb4 r3 : 00000000 r2 : 0000009c r1 : c0725dc4 r0 : ef19ceb4 This patch adds a condition to avoid the dereference. Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-19usb: renesas_usbhs: gadget: Fix NULL pointer dereference in usbhsg_ep_dequeue()Yoshihiro Shimoda1-2/+9
This patch fixes an issue that NULL pointer dereference happens when a gadget driver calls usb_ep_dequeue() for ep0 after disconnected a usb cable. This is because that usbhsg_try_stop() will call usbhsg_ep_disable(&dcp->ep) when a usb cable is disconnected and the pipe of dcp (ep0) is set to NULL. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-02Merge tag 'pinctrl-v4.4-1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the big bulk of pin control changes for the v4.4 kernel development cycle. Development pace is high in pin control again this merge window. 28 contributors, 83 patches. It hits a few sites outside the pin control subsystem: - Device tree bindings in Documentation (as usual) - MAINTAINERS - drivers/base/* for the "init" state handling by Doug Anderson. This has been ACKed by Greg. - drivers/usb/renesas_usbhs/rcar2.c, for a dependent Renesas change in the USB subsystem. This has been ACKed by both Greg and Felipe. - arch/arm/boot/dts/sama5d2.dtsi - this should ideally have gone through the ARM SoC tree but ended up here. This time I am using Geert Uytterhoeven as submaintainer for SH PFC since the are three-four people working in parallel with new Renesas ASICs. Summary of changes: Infrastructure: - Doug Anderson wrote a patch adding an "init" state different from the "default" state for pin control state handling in the core framework. This is applied before the driver's probe() call if defined and takes precedence over "default". If both are defined, "init" will be applied *before* probe() and "default" will be applied *after* probe(). Significant subdriver improvements: - SH PFC is switched to getting GPIO ranges from the device tree ranges property on DT platforms. - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all modernized. - Got rid of SH PFC hardcoded IRQ numbers. - Allwinner sunxi external interrupt through the "r" controller. - Moved the Cygnus driver to use DT-provided GPIO ranges. New drivers: - Atmel PIO4 pin controller for the SAMA4D2 family New subdrivers: - Rockchip RK3036 subdriver - Renesas SH PFC R8A7795 subdriver - Allwinner sunxi A83T PIO subdriver - Freescale i.MX7d iomux lpsr subdriver - Marvell Berlin BG4CT subdriver - SiRF Atlas 7 step B SoC subdriver - Intel Broxton SoC subdriver Apart from this, the usual slew if syntactic and semantic fixes" * tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (81 commits) pinctrl: pinconf: remove needless loop pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER pinctrl: zynq: fix UTF-8 errors pinctrl: zynq: Initialize early pinctrl: at91: add missing of_node_put pinctrl: tegra-xusb: Correct lane mux options pinctrl: intel: Add Intel Broxton pin controller support pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs pinctrl: intel: Add support for multiple GPIO chips sharing the interrupt drivers/pinctrl: Add the concept of an "init" state pinctrl: uniphier: set input-enable before pin-muxing pinctrl: cygnus: Add new compatible string for gpio controller driver pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver pinctrl: cygnus: Optional DT property to support pin mappings pinctrl: sunxi: Add irq pinmuxing to sun6i "r" pincontroller pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl block pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entry pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entry pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h> usb: renesas_usbhs: Remove unneeded #include <linux/platform_data/gpio-rcar.h> ...
2015-10-20usb: renesas_usbhs: Remove unneeded #include <linux/platform_data/gpio-rcar.h>Geert Uytterhoeven1-1/+0
This header file will be removed soon. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <balbi@ti.com>
2015-09-30usb: renesas_usbhs: Add support for R-Car H3Yoshihiro Shimoda1-0/+5
This patch adds a compatible string to support for R-Car H3. Since the HS-USB controller of R-Car H3 is almost the same specification with R-Car Gen2 (these have 16 pipes and usb-dmac), this patch sets the "type" of renesas_usbhs_driver_param to USBHS_TYPE_RCAR_GEN2. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-30usb: renesas_usbhs: fix build warning if 64-bit architectureYoshihiro Shimoda1-1/+1
This patch fixes the following warning if 64-bit architecture environment: ./drivers/usb/renesas_usbhs/common.c:496:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] dparam->type = of_id ? (u32)of_id->data : 0; Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: renesas: gadget: add ep capabilities supportRobert Baldyga1-0/+6
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUSPhil Edworthy1-0/+62
These changes allow a PHY driver to trigger a VBUS interrupt and to provide the value of VBUS. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29usb: renesas_usbhs: Replace deprecated API of extconChanwoo Choi1-1/+1
This patch removes the deprecated API of extcon and then use the new extcon API with the unique id to indicate the each external connector (USB-HOST). - extcon_get_cable_state(*edev, char *) -> extcon_get_cable_state_(*edev, id) Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Felipe Balbi <balbi@ti.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Peter Chen <peter.chen@freescale.com> Cc: Varka Bhadram <varkab@cdac.in> Cc: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-06-02Merge tag 'usb-for-v4.2' of ↵Greg Kroah-Hartman4-51/+64
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.2 merge window - dwc2 adds hibernation support - preparation for sunxi glue to musb driver - new ULPI bus - new ULPI PHY driver for TUSB1210 - musb patches to support multiple DMA engines on same binary - support for R-Car E2 on renesas_usbhs Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-31usb: renesas_usbhs: Don't disable the pipe if Control write status stageYoshihiro Shimoda1-1/+8
This patch fixes an issue that sometimes this controller is not able to complete the Control write status stage. This driver should enable DCPCTR.CCPL and PID_BUF to complete the status stage. However, if this driver detects the ctrl_stage interruption first before the control write data is received, this driver will clear the PID_BUF wrongly in the usbhsf_pio_try_pop(). To avoid this issue, this patch doesn't clear the PID_BUF in the usbhsf_pio_try_pop(). (Since also the privious code doesn't disable the PID_BUF after a control transfer was finished, this patch doesn't have any side efforts.) Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31usb: renesas_usbhs: Fix fifo unclear in usbhsf_prepare_popKazuya Mizuguchi1-0/+5
This patch fixes an issue for control write. When usbhsf_prepare_pop() is called after this driver called a gadget setup function, this controller doesn't receive the control write data. So, this patch adds a code to clear the fifo for control write in usbhsf_prepare_pop(). Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-26usb: renesas_usbhs: Add support for R-Car E2Yoshihiro Shimoda1-0/+4
This patch adds a compatible string to support for R-Car E2. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>" in patch 2 Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: renesas_usbhs: Change USBHS_TYPE_R8A779x to USBHS_TYPE_RCAR_GEN2Yoshihiro Shimoda1-11/+4
Since the HSUSB controllers of R-Car Gen2 are the same specification (they have 16 pipes and usb-dmac), this patch changes USBHS_TYPE_R8A7790 and USBHS_TYPE_R8A7791 to USBHS_TYPE_RCAR_GEN2. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-22usb: renesas_usbhs: avoid uninitialized variable useArnd Bergmann1-0/+2
After the renesas_usbhs driver is enabled in ARM multi_v7_defconfig, we now get a new warning: renesas_usbhs/mod.c: In function 'usbhs_interrupt': renesas_usbhs/mod.c:246:7: warning: 'intenb1' may be used uninitialized in this function [-Wmaybe-uninitialized] gcc correctly points to a problem here, for the case that the device is in host mode, we use the intenb1 variable without having assigned it first. The state->intsts1 has a similar problem, but gcc cannot know that. This avoids the problem by initializing both sides of the comparison to zero when we don't read them from the respective registers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 88a25e02f3 ("usb: renesas_usbhs: Add access control for INTSTS1 and INTENB1 register") Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-14usb: renesas_usbhs: Add access control for INTSTS1 and INTENB1 registerNobuhiro Iwamatsu1-27/+34
INTSTS1 and INTENB1 register of renesas_usbhs can access only Host mode. This adds process of accessing INTSTS1 and INTENB1 only when renesas_usbhs is Host mode. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-28usb: renesas_usbhs: Revise the binding document about the dma-namesYoshihiro Shimoda1-9/+15
Since the DT should describe the hardware (not the driver limitation), This patch revises the binding document about the dma-names to change simple numbering as "ch%d" instead of "tx<n>" and "rx<n>". Also this patch fixes the actual code of renesas_usbhs driver to handle the new dma-names. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-27usb: renesas_usbhs: tidyup usbhs_for_each_dfifo macroKuninori Morimoto1-4/+5
Current usbhs_for_each_dfifo macro will read out-of-array's memory after last loop operation. It was not good C language operation, and the binary which was compiled by (at least) gcc 4.8.1 is broken. This patch is based on 925403f425a4a9c503f2fc295652647b1eb10d82 (usb: renesas_usbhs: tidyup original usbhsx_for_each_xxx macro) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-03renesas_usbhs: mod_host: use USB_DT_HUBSergei Shtylyov1-1/+1
Fix using the bare number to set the 'bDescriptorType' field of the Hub Descriptor while the value is #define'd in <linux/usb/ch11.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-19usb: renesas_usbhs: fix spinlock suspected in a gadget complete functionYoshihiro Shimoda1-3/+19
According to the gadget.h, a "complete" function will always be called with interrupts disabled. However, sometimes usbhsg_queue_pop() function is called with interrupts enabled. So, this function should be held by usbhs_lock() to disable interruption. Also, this driver has to call spin_unlock() to avoid spinlock recursion by this driver before calling usb_gadget_giveback_request(). Otherwise, there is possible to cause a spinlock suspected in a gadget complete function. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-13usb: renesas_usbhs: add support for USB-DMACYoshihiro Shimoda6-6/+226
Some Renesas SoCs have the USB-DMAC. It is able to terminate transfers when a short packet is received, even if less bytes than the transfer counter size have been received. Also, it is able to send a short packet even if the packet size is not multiples of 8bytes. Since the previous code has used the interruption of USBHS controller when receiving packets even if this driver has used a dmac, a lot of interruptions has happened. This patch will reduce such interruptions. This patch allows to use the USB-DMAC on R-Car H2 and M2. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-13usb: renesas_usbhs: fix the sequence in xfer_work()Yoshihiro Shimoda1-2/+2
This patch fixes the setup sequence in xfer_work(). Otherwise, sometimes a usb transaction will get stuck. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-13usb: renesas_usbhs: add the channel number in dma-namesYoshihiro Shimoda1-7/+13
To connect the channel of USB-DMAC to USBHS DnFIFO number, this patch adds this channel/FIFO number in dma-names. Otherwise, this driver needs to add analysis code for device tree. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23usb: renesas: fix extcon dependencyArnd Bergmann1-0/+1
The renesas usbhs driver calls extcon_get_edev_by_phandle(), which is defined in drivers/extcon/extcon-class.c, and that can be a loadable module. If the extcon-class support is disabled, usbhs will work correctly for all devices that do not need extcon. However, if extcon-class is a loadable module, and usbhs is built-in, the kernel fails to link. In order to solve that, we need a Kconfig dependency that allows extcon to be disabled but does not allow usbhs built-in if extcon is a module. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-30usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel()Yoshihiro Shimoda1-0/+4
This patch fixes an issue that the following commit causes NULL pointer dereference in dma_release_channel(). "usb: renesas_usbhs: add support for requesting DT DMA" (commit id abd2dbf6bb1b5f3a03a8c76b1a8879da1dd30caa) The usbhsf_dma_init_dt() should set fifo->{t,r}x_chan to NULL if dma_request_slave_channel_reason() returns IS_ERR value. Otherwise, usbhsf_dma_quit() will call dma_release_channel(), and then NULL pointer dereference happens. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Simon Horman <horms+renesas@verge.net.au> Reported-by: Simon Horman <horms@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-29usb: renesas_usbhs: gadget: set value for common is_selfpoweredPeter Chen1-0/+2
Set value for common is_selfpowered. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: renesas_usbhs: add support for requesting DT DMAYoshihiro Shimoda1-1/+10
This patch adds dma_request_slave_channel_reason() calling to request dma slave channels for multiplatform environment. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: renesas_usbhs: add usbhsf_dma_init_pdev() functionYoshihiro Shimoda1-3/+9
To add support for requesting DT DMA in the future, this patch adds usbhsf_dma_init_pdev() function. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27usb: renesas_usbhs: mod_host: use HUB_CHAR_*Sergei Shtylyov1-1/+2
Fix using the bare number to set the 'wHubCharacteristics' field of the Hub Descriptor while the values are #define'd in <linux/usb/ch11.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-13usb: renesas_usbhs: add OTG ID signal sensingSergei Shtylyov2-0/+20
On the Renesas R8A7791 SoC based boards there's MAX3355 USB OTG chip and mini-AB USB connector corresponding to USB port 0 driven either by EHCI/OHCI or Renesas USBHS gadget controller. And we'd like the host/gadget drivers to work based on the cable type connected. An 'extcon' driver for MAX3355 has been written, so we only need to bind to it via device tree which I'm doing in this patch. (Perhaps, it would also make sense to use OTG HNP when the USBHS host mode is active and a B-cable is connected but I don't have access to host-capable USBHS, so wouldn't be able to test it.) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: renesas_usbhs: fix platform init error messageSergei Shtylyov1-1/+1
There is a typo ("prove" instead of "probe") in the error message printed when the platform initialization fails. Replace that word with more fitting "init". Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: renesas_usbhs: kill dead code in usbhs_probe()Sergei Shtylyov1-5/+1
usbhsc_drvcllbck_notify_hotplug() always returns 0, so it's rather pointless to store and check its result for being < 0. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12usb: renesas_usbhs: expand USB-DMAC channels for R-Car Gen2Yoshihiro Shimoda3-1/+7
This patch expands USB-DMAC channels for R-Car Gen2 SoCs. The SoCs have 4 channels. If d{2,3}_{t,x}x_id are not set, this driver never uses the expanded USB-DMAC channels. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12usb: renesas_usbhs: add a new macro for extending DnFIFOsYoshihiro Shimoda1-2/+7
To extend DnFIFOs in the future, this patch adds a new macro because some SoCs don't the "port" address for DnFIFOs. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12usb: renesas_usbhs: standardize d{0,1}fifo controlYoshihiro Shimoda2-38/+37
To expand DnFIFOs in the future, this patch standardizes the d{0,1}fifo control using new macros. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12usb: renesas_usbhs: change d{0,1}fifo to dfifo arrayYoshihiro Shimoda2-4/+4
To extend DnFIFOs in the future, this patch changes d{0,1}fifo of usbhs_fifo_info to dfifo array. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: renesas_usbhs: fix usbhs_pipe_clear() for DCP PIPEYoshihiro Shimoda5-4/+27
Since the DCPCTR doesn't have the ACLRM bit, the usbus_pipe_clear() should not call the usbhsp_pipectrl_set() with ACLRM. So, this patch fixes this issue to add the usbhs_fifo_clear_dcp() in fifo.c because the controller needs the CFIFO to clear the the DCP PIPE. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: renesas_usbhs: fix the timing of dcp_control_transfer_doneYoshihiro Shimoda2-16/+3
According to the datasheet, this driver should clear the INTSTS0.CTRT bit before this controller detects the next stage transition. Otherwise, the driver may not be able to clear the bit after the controller went to the next stage transition. After that, the driver will not be able to clear the INTSTS0.VALID, and a usb control transfer will not finish finally. If we use the testusb tool, it is easy to reproduce this issue: # testusb -a -t 10 Since the previous code handled a data stage and a status stage in the usbhsf_pio_try_push(), it may not clear the INTSTS0.CTRT at the right timing. So, this patch change the timing of usbhs_dcp_control_transfer_done() to the usbhsg_irq_ctrl_stage(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: renesas_usbhs: gadget: fix the behavior of pullupTakeshi Kihara2-3/+33
This patch fixes an issue that this driver always enable the D+ pullup after it detected the VBUS connection even though this usb controller can control the D+ pullup timing by software. So, this driver should enable the D+ pullup after a gadget driver called usb_gadget_connect(). Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-05usb: renesas_usbhs: gadget: fix NULL pointer dereference in ep_disable()Kazuya Mizuguchi1-0/+3
This patch fixes an issue that the NULL pointer dereference happens when we uses g_audio driver. Since the g_audio driver will call usb_ep_disable() in afunc_set_alt() before it calls usb_ep_enable(), the uep->pipe of renesas usbhs driver will be NULL. So, this patch adds a condition to avoid the oops. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 2f98382dc (usb: renesas_usbhs: Add Renesas USBHS Gadget) Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: renesas_usbhs: common: remove duplicate check on resourceVarka Bhadram1-2/+2
Sanity check on resource happening with devm_ioremap_resource(). Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: gadget: remove unnecessary 'driver' argumentFelipe Balbi1-2/+1
now that no UDC driver relies on the extra 'driver' argument to ->udc_stop(), we can safely remove it. This commit is based on previous work by Robert Baldyga <r.baldyga@samsung.com> which can be found at [1]; however that patch turned out to have a high probability of regressing many UDC drivers because of a blind search & replace s/driver/$udc->driver/ which caused the 'driver' argument to stop_activity() to be a valid non-NULL pointer when it should be NULL, thus causing UDCs to mistakenly call gadget driver's ->disconnect() callback. [1] http://markmail.org/message/x5zneg4xea4zntab Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 20:29:46 +0300