summaryrefslogtreecommitdiff
path: root/drivers/usb/misc
AgeCommit message (Collapse)AuthorFilesLines
2017-08-28usb: misc: lvstest: add entry to place port in compliance modeJack Pham1-0/+41
Add support for the SuperSpeed Link Layer test case TD.7.34 which requires the operator to place the port into compliance mode, and to subsequently bring it out via reset. Historically according to the (now deprecated) USB 3.0 specification a SuperSpeed host downstream port would automatically transition to Compliance mode from the Polling state if LFPS polling times out. However the language in USB 3.1 as well as xHCI 1.1 states it may be required to explicitly enable this transition. For such hosts this is done by sending a SET_FEATURE(PORT_LINK_STATE) with the state set to Compliance to the root hub port. Similar to the other supported commands, to do this via sysfs: echo > /sys/bus/usb/devices/2-0\:1.0/enable_compliance According to xHCI 1.1 section 4.19.1.2.4.1, this enables the transition to compliance mode upon LFPS timeout. Note that this can only be issued when the port is in disconnected state. And in order to disable this behavior on subsequent transitions, a warm reset should be issued. So add another entry to do that: echo > /sys/bus/usb/devices/2-0\:1.0/warm_reset In general these attributes can also be useful for other USB SuperSpeed compliance tests such as electrical and eye diagram testing which require CPn patterns to be transmitted. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28usb: misc: ftdi-elan: fix duplicated code for different branchesGustavo A. R. Silva1-26/+1
Refactor code in order to avoid identical code for different branches. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-10usb: usbsevseg: constify attribute_group structures.Arvind Yadav1-1/+1
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-22USB: misc: remove unneeded MODULE_VERSION() usageGreg Kroah-Hartman11-26/+2
MODULE_VERSION is useless for in-kernel drivers, so just remove all usage of it in the USB misc drivers. Along with this, some DRIVER_VERSION macros were removed as they are also pointless. Cc: Keith Packard <keithp@keithp.com> Cc: Juergen Stuber <starblue@users.sourceforge.net> Cc: Cesar Miquel <miquel@df.uba.ar> Acked-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17usb: misc: ftdi-elan: compress return logic into one lineGustavo A. R. Silva1-3/+3
Simplify return logic to avoid unnecessary variable declaration and assignment. This issue was detected using Coccinelle and the following semantic patch: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17usb: misc: sisusbvga: compress return logic into one lineGustavo A. R. Silva1-10/+3
Simplify return logic to avoid unnecessary variable declaration and assignment. These issues were detected using Coccinelle and the following semantic patch: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-27usb: typec: ucsi: Add ACPI driverHeikki Krogerus4-720/+0
Driver for ACPI UCSI interface method. This driver replaces the previous UCSI driver drivers/usb/misc/ucsi.c. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: misc: usbsevseg: Use sysfs_match_string() helperAndy Shevchenko1-10/+8
Use sysfs_match_string() helper instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-22Merge 4.12-rc2 into usb-nextGreg Kroah-Hartman4-3/+4
We want the USB fixes in here as well to handle testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17USB: iowarrior: use memdup_userGeliang Tang1-8/+3
Use memdup_user() helper instead of open-coding to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17USB: iowarrior: fix info ioctl on big-endian hostsJohan Hovold1-1/+1
Drop erroneous le16_to_cpu when returning the USB device speed which is already in host byte order. Found using sparse: warning: cast to restricted __le16 Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable <stable@vger.kernel.org> # 2.6.21 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17USB: chaoskey: fix Alea quirk on big-endian hostsJohan Hovold1-1/+1
Add missing endianness conversion when applying the Alea timeout quirk. Found using sparse: warning: restricted __le16 degrades to integer Fixes: e4a886e811cd ("hwrng: chaoskey - Fix URB warning due to timeout on Alea") Cc: stable <stable@vger.kernel.org> # 4.8 Cc: Bob Ham <bob.ham@collabora.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17sisusb_con: fix coccinelle warningJiri Slaby1-1/+1
After commit d705ff3818 (tty: vt, cleanup and document con_scroll), in the coccinelle output, we can see: drivers/usb/misc/sisusbvga/sisusb_con.c:852:8-9: WARNING: return of 0/1 in function 'sisusbcon_scroll_area' with return type bool Return true instead of 1 in the function returning bool which was intended to do in d705ff3818 but omitted. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: d705ff3818 (tty: vt, cleanup and document con_scroll) Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17usb: misc: legousbtower: Fix memory leakMaksim Salau1-0/+1
get_version_reply is not freed if function returns with success. Fixes: 942a48730faf ("usb: misc: legousbtower: Fix buffers on stack") Reported-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Maksim Salau <maksim.salau@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-26usb: misc: legousbtower: Fix buffers on stackMaksim Salau1-10/+27
Allocate buffers on HEAP instead of STACK for local structures that are to be received using usb_control_msg(). Signed-off-by: Maksim Salau <maksim.salau@gmail.com> Tested-by: Alfredo Rafael Vicente Boix <alviboi@gmail.com>; Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: misc: refactor codeGustavo A. R. Silva1-28/+21
Code refactoring to make the flow easier to follow. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: misc: add missing continue in switchGustavo A. R. Silva1-0/+1
Add missing continue in switch. Addresses-Coverity-ID: 1248733 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-29USB: lvstest: tighten endpoint sanity checkJohan Hovold1-4/+3
Use the new endpoint helpers to lookup the required interrupt-in endpoint. Note that this in fact both loosens and tightens the endpoint sanity check by accepting any interface with an interrupt-in endpoint rather than always using the first endpoint without verifying its type. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-27Merge 4.11-rc4 into usb-nextGreg Kroah-Hartman3-0/+12
This resolves a merge issue in the gadget code, and we want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: yurex: refactor endpoint retrievalJohan Hovold1-11/+5
Use the new endpoint helpers to lookup the required interrupt-in endpoint. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: uss720: add debug endpoint-type checkJohan Hovold1-4/+6
Use the new endpoint helpers to lookup the interrupt-in endpoint, and only print the corresponding debugging information in case it is found. Note that the descriptors are searched in reverse order to avoid any regressions. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: usblcd: refactor endpoint retrievalJohan Hovold1-29/+18
Use the new endpoint helpers to lookup the required bulk-in and bulk-out endpoints. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: legousbtower: refactor endpoint retrievalJohan Hovold1-22/+7
Use the new endpoint helpers to lookup the required interrupt-in and interrupt-out endpoints. Note that the descriptors are searched in reverse order to avoid any regressions. Cc: Juergen Stuber <starblue@users.sourceforge.net> Cc: legousb-devel@lists.sourceforge.net Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: ldusb: refactor endpoint retrievalJohan Hovold1-14/+9
Use the new endpoint helpers to lookup the required interrupt-in endpoint and optional interrupt-out endpoint. Note that the descriptors are searched in reverse order to avoid any regressions. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: iowarrior: refactor endpoint retrievalJohan Hovold1-17/+8
Use the new endpoint helpers to lookup the required interrupt-in endpoint. IOWarror56 devices also requires an interrupt-out endpoint, which is looked up in a second call. Note that the descriptors are searched in reverse order to avoid any regressions. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: idmouse: refactor endpoint retrievalJohan Hovold1-16/+12
Use the new endpoint helpers to lookup the required bulk-in endpoint. Note that we now pick the first bulk-in endpoint regardless of whether it happens to be the first descriptor. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: ftdi-elan: refactor endpoint retrievalJohan Hovold1-25/+17
Use the new endpoint helpers to lookup the required bulk-in and bulk-out endpoints. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: chaoskey: refactor endpoint retrievalJohan Hovold1-12/+10
Use the new endpoint helpers to lookup the required bulk-in endpoint. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: appledisplay: refactor endpoint retrievalJohan Hovold1-13/+6
Use the new endpoint helpers to lookup the required interrupt-in endpoint. Note that the default retval was never used. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: adutux: refactor endpoint retrievalJohan Hovold1-23/+8
Use the new endpoint helpers to lookup the required interrupt-in and interrupt-out endpoints. Note that the descriptors are searched in reverse order to avoid any regressions. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: adutux: fix up error pathsJohan Hovold1-13/+10
Make sure to return -ENOMEM on all allocation failures and -EIO on a string-retrieval error (instead of returning -ENODEV for some such errors). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23USB: adutux: drop redundant sanity checkJohan Hovold1-5/+0
Drop a redundant sanity check for a NULL parent usb device, which is never true. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17USB: misc: sisusb_con: fix coccinelle warningJiri Slaby1-1/+1
After commit d705ff3818 (tty: vt, cleanup and document con_scroll), in the coccinelle output, we can see: drivers/usb/misc/sisusbvga/sisusb_con.c:852:8-9: WARNING: return of 0/1 in function 'sisusbcon_scroll_area' with return type bool Return true instead of 1 in the function returning bool which was intended to do in d705ff3818 but omitted. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: d705ff3818 (tty: vt, cleanup and document con_scroll) Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: cocci@systeme.lip6.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17USB: misc: ldusb: changed '*' location to fit coding StyleMilian Reichardt1-10/+10
Changed the location of '*' to fit the current coding style and easy readability. Signed-of-by: Milian Reichardt <mreichardt95@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17USB: misc: ldusb: Added Space after ',' to fit the coding styleMilian Reichardt1-1/+1
Added a Space after ',' to get rid of an error message in checkpatch.pl and improve readability Signed-of-by: Milian Reichardt <mreichardt95@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17USB: misc: ldusb: fixed decimal permission coding issueMilian Reichardt1-4/+4
Fixed ERROR: Use 4 digit octal (0777) not decimal permissions to fulfill the current coding-style. Signed-of-by: Milian Reichardt <mreichardt95@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: misc: remove unnecessary codeGustavo A. R. Silva1-1/+1
'val' is an unsigned variable, and less-than-zero comparison of an unsigned variable is never true. Addresses-Coverity-ID: 1230257 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-16usb: misc: lvs: fix race condition in disconnect handlingOliver Neukum1-0/+1
There is a small window during which the an URB may remain active after disconnect has returned. If in that case already freed memory may be accessed and executed. The fix is to poison the URB befotre the work is flushed. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-16usb: misc: remove unnecessary codeGustavo A. R. Silva1-1/+1
'val' is an unsigned variable, and less-than-zero comparison of an unsigned variable is never true. Addresses-Coverity-ID: 1230256 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14USB: uss720: fix NULL-deref at probeJohan Hovold1-0/+5
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Note that the endpoint access that causes the NULL-deref is currently only used for debugging purposes during probe so the oops only happens when dynamic debugging is enabled. This means the driver could be rewritten to continue to accept device with only two endpoints, should such devices exist. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14USB: lvtest: fix NULL-deref at probeJohan Hovold1-0/+4
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should the probed device lack endpoints. Note that this driver does not bind to any devices by default. Fixes: ce21bfe603b3 ("USB: Add LVS Test device driver") Cc: stable <stable@vger.kernel.org> # 3.17 Cc: Pratyush Anand <pratyush.anand@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14USB: idmouse: fix NULL-deref at probeJohan Hovold1-0/+3
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: usb251xb: dt: add unit suffix to oc-delay and power-on-timeRichard Leitner1-15/+20
Rename oc-delay-* to oc-delay-us and make it expect a time value. Furthermore add -ms suffix to power-on-time. There changes were suggested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: usb251xb: remove max_{power,current}_{sp,bp} propertiesRichard Leitner1-20/+4
Remove the max_{power,current}_{sp,bp} properties of the usb251xb driver from devicetree. This is done to simplify the dt bindings as requested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. If those properties are ever needed by somebody they can be enabled again easily. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09USB: iowarrior: fix NULL-deref in writeJohan Hovold1-0/+8
Make sure to verify that we have the required interrupt-out endpoint for IOWarrior56 devices to avoid dereferencing a NULL-pointer in write should a malicious device lack such an endpoint. Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable <stable@vger.kernel.org> # 2.6.21 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09USB: iowarrior: fix NULL-deref at probeJohan Hovold1-6/+7
Make sure to check for the required interrupt-in endpoint to avoid dereferencing a NULL-pointer should a malicious device lack such an endpoint. Note that a fairly recent change purported to fix this issue, but added an insufficient test on the number of endpoints only, a test which can now be removed. Fixes: 4ec0ef3a8212 ("USB: iowarrior: fix oops with malicious USB descriptors") Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable <stable@vger.kernel.org> # 2.6.21 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar4-1/+4
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-28lib/vsprintf.c: remove %Z supportAlexey Dobriyan3-8/+8
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-14usb: misc: add USB251xB/xBi Hi-Speed Hub Controller DriverRichard Leitner3-0/+615
This patch adds a driver for configuration of the Microchip USB251xB/xBi USB 2.0 hub controller series with USB 2.0 upstream connectivity, SMBus configuration interface and two to four USB 2.0 downstream ports. Furthermore add myself as a maintainer for this driver. The datasheet can be found at the manufacturers website, see [1]. All device-tree exposed configuration features have been tested on a i.MX6 platform with a USB2512B hub. [1] http://ww1.microchip.com/downloads/en/DeviceDoc/00001692C.pdf Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14usb: misc: usbtest: remove redundant check on retval < 0Colin Ian King1-1/+1
The check for retval being less than zero is always true since retval equal to -EPIPE at that point. Replace the existing conditional with just return retval. Detected with CoverityScan, CID#114349 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-13 15:18:52 +0300