summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)AuthorFilesLines
2022-10-26usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()Jianglei Nie1-1/+6
[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ] xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15xhci: Add grace period after xHC start to prevent premature runtime suspend.Mathias Nyman3-2/+15
commit 33e321586e37b642ad10594b9ef25a613555cd08 upstream. After xHC controller is started, either in probe or resume, it can take a while before any of the connected usb devices are visible to the roothub due to link training. It's possible xhci driver loads, sees no acivity and suspends the host before the USB device is visible. In one testcase with a hotplugged xHC controller the host finally detected the connected USB device and generated a wake 500ms after host initial start. If hosts didn't suspend the device duringe training it probablty wouldn't take up to 500ms to detect it, but looking at specs reveal USB3 link training has a couple long timeout values, such as 120ms RxDetectQuietTimeout, and 360ms PollingLFPSTimeout. So Add a 500ms grace period that keeps polling the roothub for 500ms after start, preventing runtime suspend until USB devices are detected. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25usb: host: ohci-ppc-of: Fix refcount leak bugLiang He1-0/+1
[ Upstream commit 40a959d7042bb7711e404ad2318b30e9f92c6b9b ] In ohci_hcd_ppc_of_probe(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220617034637.4003115-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14drivers: usb: host: Fix deadlock in oxu_bus_suspend()Duoming Zhou1-0/+2
[ Upstream commit 4d378f2ae58138d4c55684e1d274e7dd94aa6524 ] There is a deadlock in oxu_bus_suspend(), which is shown below: (Thread 1) | (Thread 2) | timer_action() oxu_bus_suspend() | mod_timer() spin_lock_irq() //(1) | (wait a time) ... | oxu_watchdog() del_timer_sync() | spin_lock_irq() //(2) (wait timer to stop) | ... We hold oxu->lock in position (1) of thread 1, and use del_timer_sync() to wait timer to stop, but timer handler also need oxu->lock in position (2) of thread 2. As a result, oxu_bus_suspend() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irq(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220417120305.64577-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14USB: host: isp116x: check return value after calling platform_get_resource()Zhen Ni1-2/+4
[ Upstream commit 134a3408c2d3f7e23eb0e4556e0a2d9f36c2614e ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Zhen Ni <nizhen@uniontech.com> Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12xhci: stop polling roothubs after shutdownHenry Lin1-0/+11
commit dc92944a014cd6a6f6c94299aaa36164dd2c238a upstream. While rebooting, XHCI controller and its bus device will be shut down in order by .shutdown callback. Stopping roothubs polling in xhci_shutdown() can prevent XHCI driver from accessing port status after its bus device shutdown. Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs polling, XHCI driver may access PCIe BAR register for port status after parent PCIe root port driver is shutdown and cause PCIe bus error. [check shared hcd exist before stopping its roothub polling -Mathias] Cc: stable@vger.kernel.org Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02xhci: Prevent futile URB re-submissions due to incorrect return value.Hongyu Xie1-3/+6
commit 243a1dd7ba48c120986dd9e66fee74bcb7751034 upstream. The -ENODEV return value from xhci_check_args() is incorrectly changed to -EINVAL in a couple places before propagated further. xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0. xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if the return value of xhci_check_args <= 0. This causes problems for example r8152_submit_rx, calling usb_submit_urb in drivers/net/usb/r8152.c. r8152_submit_rx will never get -ENODEV after submiting an urb when xHC is halted because xhci_urb_enqueue returns -EINVAL in the very beginning. [commit message and header edit -Mathias] Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.") Cc: stable@vger.kernel.org Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-05xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.Mathias Nyman1-1/+4
commit e4844092581ceec22489b66c42edc88bc6079783 upstream. The Fresco Logic FL1100 controller needs the TRUST_TX_LENGTH quirk like other Fresco controllers, but should not have the BROKEN_MSI quirks set. BROKEN_MSI quirk causes issues in detecting usb drives connected to docks with this FL1100 controller. The BROKEN_MSI flag was apparently accidentally set together with the TRUST_TX_LENGTH quirk Original patch went to stable so this should go there as well. Fixes: ea0f69d82119 ("xhci: Enable trust tx length quirk for Fresco FL11 USB controller") Cc: stable@vger.kernel.org cc: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211221112825.54690-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26usb: max-3421: Use driver data instead of maintaining a list of bound devicesUwe Kleine-König1-20/+5
commit fc153aba3ef371d0d76eb88230ed4e0dee5b38f2 upstream. Instead of maintaining a single-linked list of devices that must be searched linearly in .remove() just use spi_set_drvdata() to remember the link between the spi device and the driver struct. Then the global list and the next member can be dropped. This simplifies the driver, reduces the memory footprint and the time to search the list. Also it makes obvious that there is always a corresponding driver struct for a given device in .remove(), so the error path for !max3421_hcd can be dropped, too. As a side effect this fixes a data inconsistency when .probe() races with itself for a second max3421 device in manipulating max3421_hcd_list. A similar race is fixed in .remove(), too. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211018204028.2914597-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26usb: host: ohci-tmio: check return value after calling platform_get_resource()Yang Yingliang1-1/+1
[ Upstream commit 9eff2b2e59fda25051ab36cd1cb5014661df657b ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211011134920.118477-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delayMathias Nyman1-1/+2
commit e1959faf085b004e6c3afaaaa743381f00e7c015 upstream. Some USB 3.1 enumeration issues were reported after the hub driver removed the minimum 100ms limit for the power-on-good delay. Since commit 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub") the hub driver sets the power-on-delay based on the bPwrOn2PwrGood value in the hub descriptor. xhci driver has a 20ms bPwrOn2PwrGood value for both roothubs based on xhci spec section 5.4.8, but it's clearly not enough for the USB 3.1 devices, causing enumeration issues. Tests indicate full 100ms delay is needed. Reported-by: Walt Jr. Brake <mr.yming81@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Fixes: 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211105160036.549516-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-27xhci: Enable trust tx length quirk for Fresco FL11 USB controllerNikolay Martynov1-0/+2
commit ea0f69d8211963c4b2cc1998b86779a500adb502 upstream. Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host Controller. Before this patch streaming video from USB cam made mouse and keyboard connected to the same USB bus unusable. Also video was jerky. With this patch streaming video doesn't have any effect on other periferals and video is smooth. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST ↵Mathias Nyman1-12/+12
quirk set" [ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ] This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760. That commit effectively disabled Intel host initiated U1/U2 lpm for devices with periodic endpoints. Before that commit we disabled host initiated U1/U2 lpm if the exit latency was larger than any periodic endpoint service interval, this is according to xhci spec xhci 1.1 specification section 4.23.5.2 After that commit we incorrectly checked that service interval was smaller than U1/U2 inactivity timeout. This is not relevant, and can't happen for Intel hosts as previously set U1/U2 timeout = 105% * service interval. Patch claimed it solved cases where devices can't be enumerated because of bandwidth issues. This might be true but it's a side effect of accidentally turning off lpm. exit latency calculations have been revised since then Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22usb: host: fotg210: fix the actual_length of an iso packetKelly Devilliv2-8/+2
[ Upstream commit 091cb2f782f32ab68c6f5f326d7868683d3d4875 ] We should acquire the actual_length of an iso packet from the iTD directly using FOTG210_ITD_LENGTH() macro. Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com> Link: https://lore.kernel.org/r/20210627125747.127646-4-kelly.devilliv@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22usb: host: fotg210: fix the endpoint's transactional opportunities calculationKelly Devilliv1-19/+17
[ Upstream commit c2e898764245c852bc8ee4857613ba4f3a6d761d ] Now that usb_endpoint_maxp() only returns the lowest 11 bits from wMaxPacketSize, we should make use of the usb_endpoint_* helpers instead and remove the unnecessary max_packet()/hb_mult() macro. Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com> Link: https://lore.kernel.org/r/20210627125747.127646-3-kelly.devilliv@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22usb: ehci-orion: Handle errors of clk_prepare_enable() in probeEvgeny Novikov1-2/+6
[ Upstream commit 4720f1bf4ee4a784d9ece05420ba33c9222a3004 ] ehci_orion_drv_probe() did not account for possible errors of clk_prepare_enable() that in particular could cause invocation of clk_disable_unprepare() on clocks that were not prepared/enabled yet, e.g. in remove or on handling errors of usb_add_hcd() in probe. Though, there were several patches fixing different issues with clocks in this driver, they did not solve this problem. Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe() to avoid calls of clk_disable_unprepare() without previous successful invocation of clk_prepare_enable(). Found by Linux Driver Verification project (linuxtesting.org). Fixes: 8c869edaee07 ("ARM: Orion: EHCI: Add support for enabling clocks") Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com> Link: https://lore.kernel.org/r/20210825170902.11234-1-novikov@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22usb: host: ohci-tmio: add IRQ checkSergey Shtylyov1-0/+3
[ Upstream commit 4ac5132e8a4300637a2da8f5d6bc7650db735b8a ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to usb_add_hcd() (which takes *unsigned* IRQ #), causing request_irq() that it calls to fail with -EINVAL, overriding an original error code. Stop calling usb_add_hcd() with the invalid IRQ #s. Fixes: 78c73414f4f6 ("USB: ohci: add support for tmio-ohci cell") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/402e1a45-a0a4-0e08-566a-7ca1331506b1@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-15USB:ehci:fix Kunpeng920 ehci hardware problemLongfang Liu1-0/+3
commit 26b75952ca0b8b4b3050adb9582c8e2f44d49687 upstream. Kunpeng920's EHCI controller does not have SBRN register. Reading the SBRN register when the controller driver is initialized will get 0. When rebooting the EHCI driver, ehci_shutdown() will be called. if the sbrn flag is 0, ehci_shutdown() will return directly. The sbrn flag being 0 will cause the EHCI interrupt signal to not be turned off after reboot. this interrupt that is not closed will cause an exception to the device sharing the interrupt. Therefore, the EHCI controller of Kunpeng920 needs to skip the read operation of the SBRN register. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Link: https://lore.kernel.org/r/1617958081-17999-1-git-send-email-liulongfang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28usb: max-3421: Prevent corruption of freed memoryMark Tomlinson1-30/+14
commit b5fdf5c6e6bee35837e160c00ac89327bdad031b upstream. The MAX-3421 USB driver remembers the state of the USB toggles for a device/endpoint. To save SPI writes, this was only done when a new device/endpoint was being used. Unfortunately, if the old device was removed, this would cause writes to freed memory. To fix this, a simpler scheme is used. The toggles are read from hardware when a URB is completed, and the toggles are always written to hardware when any URB transaction is started. This will cause a few more SPI transactions, but no causes kernel panics. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28xhci: Fix lost USB 2 remote wakeMathias Nyman1-1/+2
commit 72f68bf5c756f5ce1139b31daae2684501383ad5 upstream. There's a small window where a USB 2 remote wake may be left unhandled due to a race between hub thread and xhci port event interrupt handler. When the resume event is detected in the xhci interrupt handler it kicks the hub timer, which should move the port from resume to U0 once resume has been signalled for long enough. To keep the hub "thread" running we set a bus_state->resuming_ports flag. This flag makes sure hub timer function kicks itself. checking this flag was not properly protected by the spinlock. Flag was copied to a local variable before lock was taken. The local variable was then checked later with spinlock held. If interrupt is handled right after copying the flag to the local variable we end up stopping the hub thread before it can handle the USB 2 resume. CPU0 CPU1 (hub thread) (xhci event handler) xhci_hub_status_data() status = bus_state->resuming_ports; <Interrupt> handle_port_status() spin_lock() bus_state->resuming_ports = 1 set_flag(HCD_FLAG_POLL_RH) spin_unlock() spin_lock() if (!status) clear_flag(HCD_FLAG_POLL_RH) spin_unlock() Fix this by taking the lock a bit earlier so that it covers the resuming_ports flag copy in the hub thread Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22xhci: Do not use GFP_KERNEL in (potentially) atomic contextChristophe JAILLET1-3/+3
commit dda32c00c9a0fa103b5d54ef72c477b7aa993679 upstream. 'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be submitted in interrupt context" (see comment related to 'usb_submit_urb()' in 'drivers/usb/core/urb.c') So this flag should be used in all the calling chain. Up to now, 'xhci_check_maxpacket()' which is only called from 'xhci_urb_enqueue()', uses GFP_KERNEL. Be safe and pass the mem_flags to this function as well. Fixes: ddba5cd0aeff ("xhci: Use command structures when queuing commands on the command ring") Cc: <stable@vger.kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-4-mathias.nyman@linux.intel.com [iwamatsu: Adjust context] Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22usb: sl811-hcd: improve misleading indentationArnd Bergmann1-5/+4
commit 8460f6003a1d2633737b89c4f69d6f4c0c7c65a3 upstream. gcc-11 now warns about a confusingly indented code block: drivers/usb/host/sl811-hcd.c: In function ‘sl811h_hub_control’: drivers/usb/host/sl811-hcd.c:1291:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation] 1291 | if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ | ^~ drivers/usb/host/sl811-hcd.c:1295:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ 1295 | break; Rewrite this to use a single if() block with the __is_defined() macro. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210322164244.827589-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22usb: xhci: Increase timeout for HC haltMaximilian Luz1-2/+3
commit ca09b1bea63ab83f4cca3a2ae8bc4f597ec28851 upstream. On some devices (specifically the SC8180x based Surface Pro X with QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding the xhci-hcd driver at some point later does not exhibit this behavior. To work around this, double XHCI_MAX_HALT_USEC, which also resolves this issue. Cc: <stable@vger.kernel.org> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22usb: fotg210-hcd: Fix an error messageChristophe JAILLET1-2/+2
[ Upstream commit a60a34366e0d09ca002c966dd7c43a68c28b1f82 ] 'retval' is known to be -ENODEV here. This is a hard-coded default error code which is not useful in the error message. Moreover, another error message is printed at the end of the error handling path. The corresponding error code (-ENOMEM) is more informative. So remove simplify the first error message. While at it, also remove the useless initialization of 'retval'. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22usb: xhci: Fix port minor revisionThinh Nguyen1-0/+9
[ Upstream commit 64364bc912c01b33bba6c22e3ccb849bfca96398 ] Some hosts incorrectly use sub-minor version for minor version (i.e. 0x02 instead of 0x20 for bcdUSB 0x320 and 0x01 for bcdUSB 0x310). Currently the xHCI driver works around this by just checking for minor revision > 0x01 for USB 3.1 everywhere. With the addition of USB 3.2, checking this gets a bit cumbersome. Since there is no USB release with bcdUSB 0x301 to 0x309, we can assume that sub-minor version 01 to 09 is incorrect. Let's try to fix this and use the minor revision that matches with the USB/xHCI spec to help with the version checking within the driver. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ed330e95a19dc367819c5b4d78bf7a541c35aa0a.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-07usb: xhci-mtk: fix broken streams issue on 0.96 xHCIChunfeng Yun1-1/+9
commit 6f978a30c9bb12dab1302d0f06951ee290f5e600 upstream. The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17xhci: Improve detection of device initiated wake signal.Mathias Nyman1-3/+13
commit 253f588c70f66184b1f3a9bbb428b49bbda73e80 upstream. A xHC USB 3 port might miss the first wake signal from a USB 3 device if the port LFPS reveiver isn't enabled fast enough after xHC resume. xHC host will anyway be resumed by a PME# signal, but will go back to suspend if no port activity is seen. The device resends the U3 LFPS wake signal after a 100ms delay, but by then host is already suspended, starting all over from the beginning of this issue. USB 3 specs say U3 wake LFPS signal is sent for max 10ms, then device needs to delay 100ms before resending the wake. Don't suspend immediately if port activity isn't detected in resume. Instead add a retry. If there is no port activity then delay for 120ms, and re-check for port activity. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210311115353.2137560-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10xhci: fix bounce buffer usage for non-sg list caseMathias Nyman1-11/+20
commit d4a610635400ccc382792f6be69427078541c678 upstream. xhci driver may in some special cases need to copy small amounts of payload data to a bounce buffer in order to meet the boundary and alignment restrictions set by the xHCI specification. In the majority of these cases the data is in a sg list, and driver incorrectly assumed data is always in urb->sg when using the bounce buffer. If data instead is contiguous, and in urb->transfer_buffer, we may still need to bounce buffer a small part if data starts very close (less than packet size) to a 64k boundary. Check if sg list is used before copying data to/from it. Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: stable@vger.kernel.org Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Tested-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210203113702.436762-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30xhci: tegra: Delay for disabling LFPS detectorJC Kuo1-0/+7
commit da7e0c3c2909a3d9bf8acfe1db3cb213bd7febfb upstream. Occasionally, we are seeing some SuperSpeed devices resumes right after being directed to U3. This commits add 500us delay to ensure LFPS detector is disabled before sending ACK to firmware. [ 16.099363] tegra-xusb 70090000.usb: entering ELPG [ 16.104343] tegra-xusb 70090000.usb: 2-1 isn't suspended: 0x0c001203 [ 16.114576] tegra-xusb 70090000.usb: not all ports suspended: -16 [ 16.120789] tegra-xusb 70090000.usb: entering ELPG failed The register write passes through a few flop stages of 32KHz clock domain. NVIDIA ASIC designer reviewed RTL and suggests 500us delay. Cc: stable@vger.kernel.org Signed-off-by: JC Kuo <jckuo@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210115161907.2875631-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30xhci: make sure TRB is fully written before giving it to the controllerMathias Nyman1-0/+2
commit 576667bad341516edc4e18eb85acb0a2b4c9c9d9 upstream. Once the command ring doorbell is rung the xHC controller will parse all command TRBs on the command ring that have the cycle bit set properly. If the driver just started writing the next command TRB to the ring when hardware finished the previous TRB, then HW might fetch an incomplete TRB as long as its cycle bit set correctly. A command TRB is 16 bytes (128 bits) long. Driver writes the command TRB in four 32 bit chunks, with the chunk containing the cycle bit last. This does however not guarantee that chunks actually get written in that order. This was detected in stress testing when canceling URBs with several connected USB devices. Two consecutive "Set TR Dequeue pointer" commands got queued right after each other, and the second one was only partially written when the controller parsed it, causing the dequeue pointer to be set to bogus values. This was seen as error messages: "Mismatch between completed Set TR Deq Ptr command & xHCI internal state" Solution is to add a write memory barrier before writing the cycle bit. Cc: <stable@vger.kernel.org> Tested-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210115161907.2875631-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30USB: ehci: fix an interrupt calltrace errorLongfang Liu1-0/+3
commit 643a4df7fe3f6831d14536fd692be85f92670a52 upstream. The system that use Synopsys USB host controllers goes to suspend when using USB audio player. This causes the USB host controller continuous send interrupt signal to system, When the number of interrupts exceeds 100000, the system will forcibly close the interrupts and output a calltrace error. When the system goes to suspend, the last interrupt is reported to the driver. At this time, the system has set the state to suspend. This causes the last interrupt to not be processed by the system and not clear the interrupt flag. This uncleared interrupt flag constantly triggers new interrupt event. This causing the driver to receive more than 100,000 interrupts, which causes the system to forcibly close the interrupt report and report the calltrace error. so, when the driver goes to sleep and changes the system state to suspend, the interrupt flag needs to be cleared. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1610416647-45774-1-git-send-email-liulongfang@huawei.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30ehci: fix EHCI host controller initialization sequenceEugene Korenevsky1-0/+12
commit 280a9045bb18833db921b316a5527d2b565e9f2e upstream. According to EHCI spec, EHCI HC clears USBSTS.HCHalted whenever USBCMD.RS=1. However, it is a good practice to wait some time after setting USBCMD.RS (approximately 100ms) until USBSTS.HCHalted become zero. Without this waiting, VirtualBox's EHCI virtual HC accidentally hangs (see BugLink). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211095 Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210110173609.GA17313@himera.home Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-23usb: ohci: Make distrust_firmware param default to falseHamish Martin1-1/+1
commit c4005a8f65edc55fb1700dfc5c1c3dc58be80209 upstream. The 'distrust_firmware' module parameter dates from 2004 and the USB subsystem is a lot more mature and reliable now than it was then. Alter the default to false now. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20200910212512.16670-2-hamish.martin@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk setMichael Grzeschik1-12/+12
commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760 upstream. The commit 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") was constraining the xhci code not to allow U1/U2 sleep states if the latency to wake up from the U-states reached the service interval of an periodic endpoint. This fix was not taking into account that in case the quirk XHCI_INTEL_HOST is set, the wakeup time will be calculated and configured differently. It checks for u1_params.mel/u2_params.mel as a limit. But the code could decide to write another MEL into the hardware. This leads to broken cases where not enough bandwidth is available for other devices: usb 1-2: can't set config #1, error -28 This patch is fixing that case by checking for timeout_ns after the wakeup time was calculated depending on the quirks. Fixes: 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201215193147.11738-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29usb: oxu210hp-hcd: Fix memory leak in oxu_createZhang Qilong1-1/+3
[ Upstream commit e5548b05631ec3e6bfdaef1cad28c799545b791b ] usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when adding fails to prevent memory leak. Fixes: b92a78e582b1a ("usb host: Oxford OXU210HP HCD driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201123145809.1456541-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29usb: ehci-omap: Fix PM disable depth umbalance in ehci_hcd_omap_probeZhang Qilong1-0/+1
[ Upstream commit d6ff32478d7e95d6ca199b5c852710d6964d5811 ] The pm_runtime_enable will decrement the power disable depth. Imbalance depth will resulted in enabling runtime PM of device fails later. Thus a pairing decrement must be needed on the error handling path to keep it balanced. Fixes: 6c984b066d84b ("ARM: OMAP: USBHOST: Replace usbhs core driver APIs by Runtime pm APIs") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201123145719.1455849-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29xhci: Give USB2 ports time to enter U3 in bus suspendLi Jun1-0/+4
commit c1373f10479b624fb6dba0805d673e860f1b421d upstream. If a USB2 device wakeup is not enabled/supported the link state may still be in U0 in xhci_bus_suspend(), where it's then manually put to suspended U3 state. Just as with selective suspend the device needs time to enter U3 suspend before continuing with further suspend operations (e.g. system suspend), otherwise we may enter system suspend with link state in U0. [commit message rewording -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201208092912.1773650-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10usb: host: fsl-mph-dr-of: check return of dma_set_mask()Ran Wang1-3/+6
commit 3cd54a618834430a26a648d880dd83d740f2ae30 upstream. fsl_usb2_device_register() should stop init if dma_set_mask() return error. Fixes: cae058610465 ("drivers/usb/host: fsl: Set DMA_MASK of usb platform device") Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Link: https://lore.kernel.org/r/20201010060308.33693-1-ran.wang_1@nxp.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29usb: ohci: Default to per-port over-current protectionHamish Martin1-6/+10
[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ] Some integrated OHCI controller hubs do not expose all ports of the hub to pins on the SoC. In some cases the unconnected ports generate spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC contains a nominally 3 port hub but only the first port is wired. Default behaviour for ohci-platform driver is to use global over-current protection mode (AKA "ganged"). This leads to the spurious over-current events affecting all ports in the hub. We now alter the default to use per-port over-current protection. This patch results in the following configuration changes depending on quirks: - For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up for ganged power switching and no over-current protection. - For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching remains at none, while over-current protection is now guaranteed to be set to per-port rather than the previous behaviour where it was either none or global over-current protection depending on the value at function entry. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20200910212512.16670-1-hamish.martin@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned intColin Ian King1-4/+3
[ Upstream commit a7f40c233a6b0540d28743267560df9cfb571ca9 ] The comparison of hcd->irq to less than zero for an error check will never be true because hcd->irq is an unsigned int. Fix this by assigning the int retval to the return of platform_get_irq and checking this for the -ve error condition and assigning hcd->irq to retval. Addresses-Coverity: ("Unsigned compared against 0") Fixes: c856b4b0fdb5 ("USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200515165453.104028-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()Tang Bin1-3/+2
[ Upstream commit c856b4b0fdb5044bca4c0acf9a66f3b5cc01a37a ] If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in mv_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200508114305.15740-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23ehci-hcd: Move include to keep CRC stableQuentin Perret2-1/+1
commit 29231826f3bd65500118c473fccf31c0cf14dbc0 upstream. The CRC calculation done by genksyms is triggered when the parser hits EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the types of the function parameters, and uses that as the input for the CRC calculation. In the case of forward-declared structs, the type expands to 'UNKNOWN'. Following this, it appears that the result of the expansion of each type is cached somewhere, and seems to be re-used when/if the same type is seen again for another exported symbol in the same C file. Unfortunately, this can cause CRC 'stability' issues when a struct definition becomes visible in the middle of a C file. For example, let's assume code with the following pattern: struct foo; int bar(struct foo *arg) { /* Do work ... */ } EXPORT_SYMBOL_GPL(bar); /* This contains struct foo's definition */ #include "foo.h" int baz(struct foo *arg) { /* Do more work ... */ } EXPORT_SYMBOL_GPL(baz); Here, baz's CRC will be computed using the expansion of struct foo that was cached after bar's CRC calculation ('UNKOWN' here). But if EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded late, during baz's CRC calculation, which now has visibility over the full struct definition, hence resulting in a different CRC for baz. The proper fix for this certainly is in genksyms, but that will take me some time to get right. In the meantime, we have seen one occurrence of this in the ehci-hcd code which hits this problem because of the way it includes C files halfway through the code together with an unlucky mix of symbol trimming. In order to workaround this, move the include done in ehci-hub.c early in ehci-hcd.c, hence making sure the struct definitions are visible to the entire file. This improves CRC stability of the ehci-hcd exports even when symbol trimming is enabled. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()Tang Bin1-3/+2
commit 1d4169834628d18b2392a2da92b7fbf5e8e2ce89 upstream. If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03xhci: Do warm-reset when both CAS and XDEV_RESUME are setKai-Heng Feng1-9/+10
commit 904df64a5f4d5ebd670801d869ca0a6d6a6e8df6 upstream. Sometimes re-plugging a USB device during system sleep renders the device useless: [ 173.418345] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x14203e2, return 0x10262 ... [ 176.496485] usb 2-4: Waited 2000ms for CONNECT [ 176.496781] usb usb2-port4: status 0000.0262 after resume, -19 [ 176.497103] usb 2-4: can't resume, status -19 [ 176.497438] usb usb2-port4: logical disconnect Because PLS equals to XDEV_RESUME, xHCI driver reports U3 to usbcore, despite of CAS bit is flagged. So proritize CAS over XDEV_RESUME to let usbcore handle warm-reset for the port. Cc: stable <stable@vger.kernel.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200821091549.20556-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-31usb: xhci: Fix ASM2142/ASM3142 DMA addressingForest Crossman1-0/+3
commit dbb0897e805f2ab1b8bc358f6c3d878a376b8897 upstream. The ASM2142/ASM3142 (same PCI IDs) does not support full 64-bit DMA addresses, which can cause silent memory corruption or IOMMU errors on platforms that use the upper bits. Add the XHCI_NO_64BIT_SUPPORT quirk to fix this issue. Signed-off-by: Forest Crossman <cyrozap@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200717112734.328432-1-cyrozap@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-31usb: xhci-mtk: fix the failure of bandwidth allocationChunfeng Yun1-0/+4
commit 5ce1a24dd98c00a57a8fa13660648abf7e08e3ef upstream. The wMaxPacketSize field of endpoint descriptor may be zero as default value in alternate interface, and they are not actually selected when start stream, so skip them when try to allocate bandwidth. Cc: stable <stable@vger.kernel.org> Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller") Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1594360672-2076-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22Revert "usb/ohci-platform: Fix a warning when hibernating"Sasha Levin1-5/+0
This reverts commit 104592a5233d77322c3e527e3925dc7c5a30a6af. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1ea7772 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1ea7772 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1ea7772 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22Revert "usb/xhci-plat: Set PM runtime as active on resume"Sasha Levin1-10/+1
This reverts commit 9e148a5e5e0929a4cb3000de9c843a07508ce575. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1ea7772 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1ea7772 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1ea7772 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22Revert "usb/ehci-platform: Set PM runtime as active on resume"Sasha Levin1-5/+0
This reverts commit 5365fc3132a36a027fd7c2bb461e651b37f1e4d1. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1ea7772 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1ea7772 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1ea7772 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30xhci: Poll for U0 after disabling USB2 LPMKai-Heng Feng1-0/+3
[ Upstream commit b3d71abd135e6919ca0b6cab463738472653ddfb ] USB2 devices with LPM enabled may interrupt the system suspend: [ 932.510475] usb 1-7: usb suspend, wakeup 0 [ 932.510549] hub 1-0:1.0: hub_suspend [ 932.510581] usb usb1: bus suspend, wakeup 0 [ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended [ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended .. [ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03 .. [ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16 [ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16 During system suspend, USB core will let HC suspends the device if it doesn't have remote wakeup enabled and doesn't have any children. However, from the log above we can see that the usb 1-7 doesn't get bus suspended due to not in U0. After a while the port finished U2 -> U0 transition, interrupts the suspend process. The observation is that after disabling LPM, port doesn't transit to U0 immediately and can linger in U2. xHCI spec 4.23.5.2 states that the maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for the affected device is advertised as 400us, which is still not enough based on my testing result. So let's use the maximum permitted latency, 10000, to poll for U0 status to solve the issue. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-08-16 22:51:13 +0300