summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)AuthorFilesLines
2023-10-25usb: xhci: xhci-ring: Use sysdev for mapping bounce bufferWesley Cheng1-2/+2
commit 41a43013d2366db5b88b42bbcd8e8f040b6ccf21 upstream. As mentioned in: commit 474ed23a6257 ("xhci: align the last trb before link if it is easily splittable.") A bounce buffer is utilized for ensuring that transfers that span across ring segments are aligned to the EP's max packet size. However, the device that is used to map the DMA buffer to is currently using the XHCI HCD, which does not carry any DMA operations in certain configrations. Migration to using the sysdev entry was introduced for DWC3 based implementations where the IOMMU operations are present. Replace the reference to the controller device to sysdev instead. This allows the bounce buffer to be properly mapped to any implementations that have an IOMMU involved. cc: stable@vger.kernel.org Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11usb: xhci-mtk: set the dma max_seg_sizeRicardo Ribalda1-0/+1
commit 9fd10829a9eb482e192a845675ecc5480e0bfa10 upstream. Allow devices to have dma operations beyond 64K, and avoid warnings such as: DMA-API: xhci-mtk 11200000.usb: mapping sg segment longer than device claims to support [len=98304] [max=65536] Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller") Cc: stable <stable@kernel.org> Tested-by: Zubin Mithra <zsm@chromium.org> Reported-by: Zubin Mithra <zsm@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20230628-mtk-usb-v2-1-c8c34eb9f229@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11usb: ohci-at91: Fix the unhandle interrupt when resumeGuiting Shen1-1/+7
commit c55afcbeaa7a6f4fffdbc999a9bf3f0b29a5186f upstream. The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when suspend which will let the ohci_irq() skip the interrupt after resume. And nobody to handle this interrupt. According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset when resume from suspend(MEM) to fix by setting "hibernated" argument of ohci_resume(). Signed-off-by: Guiting Shen <aarongt.shen@gmail.com> Cc: stable <stable@kernel.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230626152713.18950-1-aarongt.shen@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-17usb: host: xhci-rcar: remove leftover quirk handlingWolfram Sang1-3/+0
[ Upstream commit 5d67f4861884762ebc2bddb5d667444e45f25782 ] Loading V3 firmware does not need a quirk anymore, remove the leftover code. Fixes: ed8603e11124 ("usb: host: xhci-rcar: Simplify getting the firmware name for R-Car Gen3") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20230307163041.3815-10-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17xhci: fix debugfs register accesses while suspendedJohan Hovold1-0/+1
commit 735baf1b23458f71a8b15cb924af22c9ff9cd125 upstream. Wire up the debugfs regset device pointer so that the controller is resumed before accessing registers to avoid crashing or locking up if it happens to be runtime suspended. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: stable@vger.kernel.org # 4.15: 30332eeefec8: debugfs: regset32: Add Runtime PM support Cc: stable@vger.kernel.org # 4.15 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230405090342.7363-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05usb: host: ohci-pxa27x: Fix and & vs | typoDan Carpenter1-1/+1
commit 0709831a50d31b3caf2237e8d7fe89e15b0d919d upstream. The code is supposed to clear the RH_A_NPS and RH_A_PSM bits, but it's a no-op because of the & vs | typo. This bug predates git and it was only discovered using static analysis so it must not affect too many people in real life. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190817065520.GA29951@mwanda Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11usb: host: xhci: mvebu: Iterate over array indexes instead of using pointer mathKees Cook1-1/+1
[ Upstream commit 0fbd2cda92cdb00f72080665554a586f88bca821 ] Walking the dram->cs array was seen as accesses beyond the first array item by the compiler. Instead, use the array index directly. This allows for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen with GCC 13 with -fstrict-flex-arrays: In function 'xhci_mvebu_mbus_config', inlined from 'xhci_mvebu_mbus_init_quirk' at ../drivers/usb/host/xhci-mvebu.c:66:2: ../drivers/usb/host/xhci-mvebu.c:37:28: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=] 37 | writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | | ~~^~~~~~ Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230204183651.never.663-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-06usb: host: xhci-plat: add wakeup entry at sysfsPeter Chen1-1/+1
commit 4bb4fc0dbfa23acab9b762949b91ffd52106fe4b upstream. With this change, there will be a wakeup entry at /sys/../power/wakeup, and the user could use this entry to choose whether enable xhci wakeup features (wake up system from suspend) or not. Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200918131752.16488-6-mathias.nyman@linux.intel.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24usb: host: ehci-fsl: Fix module aliasAlexander Stein1-1/+1
commit 5d3d01ae15d2f37ed0325c99ab47ef0ae5d05f3c upstream. Commit ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") changed DRV_NAME which was used for MODULE_ALIAS as well. Starting from this the module alias didn't match the platform device name created in fsl-mph-dr-of.c Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of. This is needed for module autoloading on ls1021a. Fixes: ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24xhci: Add a flag to disable USB3 lpm on a xhci root port level.Mathias Nyman2-0/+9
commit 0522b9a1653048440da5f21747f21e498b9220d1 upstream. One USB3 roothub port may support link power management, while another root port on the same xHC can't due to different retimers used for the ports. This is the case with Intel Alder Lake, and possible future platforms where retimers used for USB4 ports cause too long exit latecy to enable native USB3 lpm U1 and U2 states. Add a flag in the xhci port structure to indicate if the port is lpm_incapable, and check it while calculating exit latency. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24xhci: Fix null pointer dereference when host diesMathias Nyman1-0/+5
commit a2bc47c43e70cf904b1af49f76d572326c08bca7 upstream. Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race and cause null pointer dereference when host suddenly dies. Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id] virt device at the same time that xhci_kill_endpoint_urbs() tries to loop through all the device's endpoints, checking if there are any cancelled urbs left to give back. hold the xhci spinlock while freeing the virt device Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24usb: xhci: Check endpoint is valid before dereferencing itJimmy Hu1-1/+4
commit e8fb5bc76eb86437ab87002d4a36d6da02165654 upstream. When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198 Fixes: 50e8725e7c42 ("xhci: Refactor command watchdog and fix split string.") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Hu <hhhuuu@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Message-ID: <0fe978ed-8269-9774-1c40-f8a98c17e838@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24xhci-pci: set the dma max_seg_sizeRicardo Ribalda1-0/+2
commit 93915a4170e9defd56a767a18e6c4076f3d18609 upstream. Allow devices to have dma operations beyond 64K, and avoid warnings such as: xhci_hcd 0000:00:14.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03xhci: Remove device endpoints from bandwidth list when freeing the deviceMathias Nyman1-8/+12
commit 5aed5b7c2430ce318a8e62f752f181e66f0d1053 upstream. Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge) Cc: stable@vger.kernel.org Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controllerJens Glathe1-1/+7
commit 4f547472380136718b56064ea5689a61e135f904 upstream. This appears to fix the error: "xhci_hcd <address>; ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13" that appear spuriously (or pretty often) when using a r8152 USB3 ethernet adapter with integrated hub. ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0 Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3 Cc: stable@vger.kernel.org Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()Jianglei Nie1-1/+6
[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ] xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26xhci: Don't show warning for reinit on known broken suspendMario Limonciello1-1/+2
[ Upstream commit 484d6f7aa3283d082c87654b7fe7a7f725423dfb ] commit 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set") introduced a new warning message when the host controller error was set and re-initializing. This is expected behavior on some designs which already set `xhci->broken_suspend` so the new warning is alarming to some users. Modify the code to only show the warning if this was a surprising behavior to the XHCI driver. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216470 Fixes: 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set") Reported-by: Artem S. Tashkinov <aros@gmx.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15xhci: Add grace period after xHC start to prevent premature runtime suspend.Mathias Nyman3-2/+15
commit 33e321586e37b642ad10594b9ef25a613555cd08 upstream. After xHC controller is started, either in probe or resume, it can take a while before any of the connected usb devices are visible to the roothub due to link training. It's possible xhci driver loads, sees no acivity and suspends the host before the USB device is visible. In one testcase with a hotplugged xHC controller the host finally detected the connected USB device and generated a wake 500ms after host initial start. If hosts didn't suspend the device duringe training it probablty wouldn't take up to 500ms to detect it, but looking at specs reveal USB3 link training has a couple long timeout values, such as 120ms RxDetectQuietTimeout, and 360ms PollingLFPSTimeout. So Add a 500ms grace period that keeps polling the roothub for 500ms after start, preventing runtime suspend until USB devices are detected. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15Revert "xhci: turn off port power in shutdown"Mathias Nyman3-16/+3
[ Upstream commit 8531aa1659f7278d4f2ec7408cc000eaa8d85217 ] This reverts commit 83810f84ecf11dfc5a9414a8b762c3501b328185. Turning off port power in shutdown did cause issues such as a laptop not proprly powering off, and some specific usb devies failing to enumerate the subsequent boot after a warm reset. So revert this. Fixes: 83810f84ecf1 ("xhci: turn off port power in shutdown") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25usb: host: ohci-ppc-of: Fix refcount leak bugLiang He1-0/+1
[ Upstream commit 40a959d7042bb7711e404ad2318b30e9f92c6b9b ] In ohci_hcd_ppc_of_probe(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220617034637.4003115-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probeMiaoqian Lin1-0/+1
[ Upstream commit 302970b4cad3ebfda2c05ce06c322ccdc447d17e ] of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 73108aa90cbf ("USB: ohci-nxp: Use isp1301 driver") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603141231.979-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25usb: host: Fix refcount leak in ehci_hcd_ppc_of_probeMiaoqian Lin1-0/+1
[ Upstream commit b5c5b13cb45e2c88181308186b0001992cb41954 ] of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 796bcae7361c ("USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220602110849.58549-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-02xhci: turn off port power in shutdownMathias Nyman3-3/+16
commit 83810f84ecf11dfc5a9414a8b762c3501b328185 upstream. If ports are not turned off in shutdown then runtime suspended self-powered USB devices may survive in U3 link state over S5. During subsequent boot, if firmware sends an IPC command to program the port in DISCONNECT state, it will time out, causing significant delay in the boot time. Turning off roothub port power is also recommended in xhci specification 4.19.4 "Port Power" in the additional note. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220623111945.1557702-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14drivers: usb: host: Fix deadlock in oxu_bus_suspend()Duoming Zhou1-0/+2
[ Upstream commit 4d378f2ae58138d4c55684e1d274e7dd94aa6524 ] There is a deadlock in oxu_bus_suspend(), which is shown below: (Thread 1) | (Thread 2) | timer_action() oxu_bus_suspend() | mod_timer() spin_lock_irq() //(1) | (wait a time) ... | oxu_watchdog() del_timer_sync() | spin_lock_irq() //(2) (wait timer to stop) | ... We hold oxu->lock in position (1) of thread 1, and use del_timer_sync() to wait timer to stop, but timer handler also need oxu->lock in position (2) of thread 2. As a result, oxu_bus_suspend() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irq(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220417120305.64577-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14USB: host: isp116x: check return value after calling platform_get_resource()Zhen Ni1-2/+4
[ Upstream commit 134a3408c2d3f7e23eb0e4556e0a2d9f36c2614e ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Zhen Ni <nizhen@uniontech.com> Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12USB: Fix xhci event ring dequeue pointer ERDP update issueWeitao Wang1-0/+2
[ Upstream commit e91ac20889d1a26d077cc511365cd7ff4346a6f3 ] In some situations software handles TRB events slower than adding TRBs. If the number of TRB events to be processed in a given interrupt is exactly the same as the event ring size 256, then the local variable "event_ring_deq" that holds the initial dequeue position is equal to software_dequeue after handling all 256 interrupts. It will cause driver to not update ERDP to hardware, Software dequeue pointer is out of sync with ERDP on interrupt exit. On the next interrupt, the event ring may full but driver will not update ERDP as software_dequeue is equal to ERDP. [ 536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37 [ 566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT [ 566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00 [ 572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command. [ 572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110 [ 572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead [ 572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD [ 572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00 [ 572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD Hardware ERDP is updated mid event handling if there are more than 128 events in an interrupt (half of ring size). Fix this by updating the software local variable at the same time as hardware ERDP. [commit message rewording -Mathias] Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose") Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220408134823.2527272-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12xhci: stop polling roothubs after shutdownHenry Lin1-0/+11
commit dc92944a014cd6a6f6c94299aaa36164dd2c238a upstream. While rebooting, XHCI controller and its bus device will be shut down in order by .shutdown callback. Stopping roothubs polling in xhci_shutdown() can prevent XHCI driver from accessing port status after its bus device shutdown. Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs polling, XHCI driver may access PCIe BAR register for port status after parent PCIe root port driver is shutdown and cause PCIe bus error. [check shared hcd exist before stopping its roothub polling -Mathias] Cc: stable@vger.kernel.org Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15usb: ehci: add pci device support for Aspeed platformsNeal Liu1-0/+9
[ Upstream commit c3c9cee592828528fd228b01d312c7526c584a42 ] Enable Aspeed quirks in commit 7f2d73788d90 ("usb: ehci: handshake CMD_RUN instead of STS_HALT") to support Aspeed ehci-pci device. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20220208101657.76459-1-neal_liu@aspeedtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15xhci: make xhci_handshake timeout for xhci_reset() adjustableMathias Nyman4-15/+16
commit 14073ce951b5919da450022c050772902f24f054 upstream. xhci_reset() timeout was increased from 250ms to 10 seconds in order to give Renesas 720201 xHC enough time to get ready in probe. xhci_reset() is called with interrupts disabled in other places, and waiting for 10 seconds there is not acceptable. Add a timeout parameter to xhci_reset(), and adjust it back to 250ms when called from xhci_stop() or xhci_shutdown() where interrupts are disabled, and successful reset isn't that critical. This solves issues when deactivating host mode on platforms like SM8450. For now don't change the timeout if xHC is reset in xhci_resume(). No issues are reported for it, and we need the reset to succeed. Locking around that reset needs to be revisited later. Additionally change the signed integer timeout parameter in xhci_handshake() to a u64 to match the timeout value we pass to readl_poll_timeout_atomic() Fixes: 22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.") Cc: stable@vger.kernel.org Reported-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com> Tested-by: Pavan Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02xhci: Prevent futile URB re-submissions due to incorrect return value.Hongyu Xie1-3/+6
commit 243a1dd7ba48c120986dd9e66fee74bcb7751034 upstream. The -ENODEV return value from xhci_check_args() is incorrectly changed to -EINVAL in a couple places before propagated further. xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0. xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if the return value of xhci_check_args <= 0. This causes problems for example r8152_submit_rx, calling usb_submit_urb in drivers/net/usb/r8152.c. r8152_submit_rx will never get -ENODEV after submiting an urb when xHC is halted because xhci_urb_enqueue returns -EINVAL in the very beginning. [commit message and header edit -Mathias] Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.") Cc: stable@vger.kernel.org Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02xhci: re-initialize the HC during resume if HCE was setPuma Hsu1-6/+13
commit 8b328f8002bcf29ef517ee4bf234e09aabec4d2e upstream. When HCE(Host Controller Error) is set, it means an internal error condition has been detected. Software needs to re-initialize the HC, so add this check in xhci resume. Cc: stable@vger.kernel.org Signed-off-by: Puma Hsu <pumahsu@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27usb: uhci: add aspeed ast2600 uhci supportNeal Liu1-1/+2
[ Upstream commit 554abfe2eadec97d12c71d4a69da1518478f69eb ] Enable ast2600 uhci quirks. Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20211126100021.2331024-1-neal_liu@aspeedtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-05xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.Mathias Nyman1-1/+4
commit e4844092581ceec22489b66c42edc88bc6079783 upstream. The Fresco Logic FL1100 controller needs the TRUST_TX_LENGTH quirk like other Fresco controllers, but should not have the BROKEN_MSI quirks set. BROKEN_MSI quirk causes issues in detecting usb drives connected to docks with this FL1100 controller. The BROKEN_MSI flag was apparently accidentally set together with the TRUST_TX_LENGTH quirk Original patch went to stable so this should go there as well. Fixes: ea0f69d82119 ("xhci: Enable trust tx length quirk for Fresco FL11 USB controller") Cc: stable@vger.kernel.org cc: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211221112825.54690-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14xhci: avoid race between disable slot command and host runtime suspendMathias Nyman3-8/+16
commit 7faac1953ed1f658f719cdf7bb7303fa5eef822c upstream. Make xhci_disable_slot() synchronous, thus ensuring it, and xhci_free_dev() calling it return after xHC controller completes the disable slot command. Otherwise the roothub and xHC host may runtime suspend, and clear the command ring while the disable slot command is being processed. This causes a command completion mismatch as the completion event can't be mapped to the correct command. Command ring gets out of sync and commands time out. Driver finally assumes host is unresponsive and bails out. usb 2-4: USB disconnect, device number 10 xhci_hcd 0000:00:0d.0: ERROR mismatched command completion event ... xhci_hcd 0000:00:0d.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:0d.0: HC died; cleaning up Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211210141735.1384209-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspendingKai-Heng Feng1-4/+0
commit 811ae81320da53a5670c36970cefacca8519f90e upstream. When the xHCI is quirked with XHCI_RESET_ON_RESUME, runtime resume routine also resets the controller. This is bad for USB drivers without reset_resume callback, because there's no subsequent call of usb_dev_complete() -> usb_resume_complete() to force rebinding the driver to the device. For instance, btusb device stops working after xHCI controller is runtime resumed, if the controlled is quirked with XHCI_RESET_ON_RESUME. So always take XHCI_RESET_ON_RESUME into account to solve the issue. Cc: <stable@vger.kernel.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211210141735.1384209-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08xhci: Fix commad ring abort, write all 64 bits to CRCR register.Mathias Nyman1-7/+14
commit 09f736aa95476631227d2dc0e6b9aeee1ad7ed58 upstream. Turns out some xHC controllers require all 64 bits in the CRCR register to be written to execute a command abort. The lower 32 bits containing the command abort bit is written first. In case the command ring stops before we write the upper 32 bits then hardware may use these upper bits to set the commnd ring dequeue pointer. Solve this by making sure the upper 32 bits contain a valid command ring dequeue pointer. The original patch that only wrote the first 32 to stop the ring went to stable, so this fix should go there as well. Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command") Cc: stable@vger.kernel.org Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26usb: max-3421: Use driver data instead of maintaining a list of bound devicesUwe Kleine-König1-20/+5
commit fc153aba3ef371d0d76eb88230ed4e0dee5b38f2 upstream. Instead of maintaining a single-linked list of devices that must be searched linearly in .remove() just use spi_set_drvdata() to remember the link between the spi device and the driver struct. Then the global list and the next member can be dropped. This simplifies the driver, reduces the memory footprint and the time to search the list. Also it makes obvious that there is always a corresponding driver struct for a given device in .remove(), so the error path for !max3421_hcd can be dropped, too. As a side effect this fixes a data inconsistency when .probe() races with itself for a second max3421 device in manipulating max3421_hcd_list. A similar race is fixed in .remove(), too. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211018204028.2914597-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26usb: host: ohci-tmio: check return value after calling platform_get_resource()Yang Yingliang1-1/+1
[ Upstream commit 9eff2b2e59fda25051ab36cd1cb5014661df657b ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211011134920.118477-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delayMathias Nyman1-1/+2
commit e1959faf085b004e6c3afaaaa743381f00e7c015 upstream. Some USB 3.1 enumeration issues were reported after the hub driver removed the minimum 100ms limit for the power-on-good delay. Since commit 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub") the hub driver sets the power-on-delay based on the bPwrOn2PwrGood value in the hub descriptor. xhci driver has a 20ms bPwrOn2PwrGood value for both roothubs based on xhci spec section 5.4.8, but it's clearly not enough for the USB 3.1 devices, causing enumeration issues. Tests indicate full 100ms delay is needed. Reported-by: Walt Jr. Brake <mr.yming81@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Fixes: 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211105160036.549516-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-12usb: ehci: handshake CMD_RUN instead of STS_HALTNeal Liu3-1/+17
commit 7f2d73788d9067fd4f677ac5f60ffd25945af7af upstream. For Aspeed, HCHalted status depends on not only Run/Stop but also ASS/PSS status. Handshake CMD_RUN on startup instead. Tested-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20210910073619.26095-1-neal_liu@aspeedtech.com Cc: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20xhci: Enable trust tx length quirk for Fresco FL11 USB controllerNikolay Martynov1-0/+2
commit ea0f69d8211963c4b2cc1998b86779a500adb502 upstream. Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host Controller. Before this patch streaming video from USB cam made mouse and keyboard connected to the same USB bus unusable. Also video was jerky. With this patch streaming video doesn't have any effect on other periferals and video is smooth. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20xhci: Fix command ring pointer corruption while aborting a commandPavankumar Kondeti1-4/+10
commit ff0e50d3564f33b7f4b35cadeabd951d66cfc570 upstream. The command ring pointer is located at [6:63] bits of the command ring control register (CRCR). All the control bits like command stop, abort are located at [0:3] bits. While aborting a command, we read the CRCR and set the abort bit and write to the CRCR. The read will always give command ring pointer as all zeros. So we essentially write only the control bits. Since we split the 64 bit write into two 32 bit writes, there is a possibility of xHC command ring stopped before the upper dword (all zeros) is written. If that happens, xHC updates the upper dword of its internal command ring pointer with all zeros. Next time, when the command ring is restarted, we see xHC memory access failures. Fix this issue by only writing to the lower dword of CRCR where all control bits are located. Cc: stable@vger.kernel.org Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20xhci: guard accesses to ep_state in xhci_endpoint_reset()Jonathan Bell1-0/+5
commit a01ba2a3378be85538e0183ae5367c1bc1d5aaf3 upstream. See https://github.com/raspberrypi/linux/issues/3981 Two read-modify-write cycles on ep->ep_state are not guarded by xhci->lock. Fix these. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable@vger.kernel.org Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST ↵Mathias Nyman1-12/+12
quirk set" [ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ] This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760. That commit effectively disabled Intel host initiated U1/U2 lpm for devices with periodic endpoints. Before that commit we disabled host initiated U1/U2 lpm if the exit latency was larger than any periodic endpoint service interval, this is according to xhci spec xhci 1.1 specification section 4.23.5.2 After that commit we incorrectly checked that service interval was smaller than U1/U2 inactivity timeout. This is not relevant, and can't happen for Intel hosts as previously set U1/U2 timeout = 105% * service interval. Patch claimed it solved cases where devices can't be enumerated because of bandwidth issues. This might be true but it's a side effect of accidentally turning off lpm. exit latency calculations have been revised since then Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22usb: host: fotg210: fix the actual_length of an iso packetKelly Devilliv2-8/+2
[ Upstream commit 091cb2f782f32ab68c6f5f326d7868683d3d4875 ] We should acquire the actual_length of an iso packet from the iTD directly using FOTG210_ITD_LENGTH() macro. Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com> Link: https://lore.kernel.org/r/20210627125747.127646-4-kelly.devilliv@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22usb: host: fotg210: fix the endpoint's transactional opportunities calculationKelly Devilliv1-19/+17
[ Upstream commit c2e898764245c852bc8ee4857613ba4f3a6d761d ] Now that usb_endpoint_maxp() only returns the lowest 11 bits from wMaxPacketSize, we should make use of the usb_endpoint_* helpers instead and remove the unnecessary max_packet()/hb_mult() macro. Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com> Link: https://lore.kernel.org/r/20210627125747.127646-3-kelly.devilliv@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22usb: ehci-orion: Handle errors of clk_prepare_enable() in probeEvgeny Novikov1-2/+6
[ Upstream commit 4720f1bf4ee4a784d9ece05420ba33c9222a3004 ] ehci_orion_drv_probe() did not account for possible errors of clk_prepare_enable() that in particular could cause invocation of clk_disable_unprepare() on clocks that were not prepared/enabled yet, e.g. in remove or on handling errors of usb_add_hcd() in probe. Though, there were several patches fixing different issues with clocks in this driver, they did not solve this problem. Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe() to avoid calls of clk_disable_unprepare() without previous successful invocation of clk_prepare_enable(). Found by Linux Driver Verification project (linuxtesting.org). Fixes: 8c869edaee07 ("ARM: Orion: EHCI: Add support for enabling clocks") Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com> Link: https://lore.kernel.org/r/20210825170902.11234-1-novikov@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22usb: host: ohci-tmio: add IRQ checkSergey Shtylyov1-0/+3
[ Upstream commit 4ac5132e8a4300637a2da8f5d6bc7650db735b8a ] The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to usb_add_hcd() (which takes *unsigned* IRQ #), causing request_irq() that it calls to fail with -EINVAL, overriding an original error code. Stop calling usb_add_hcd() with the invalid IRQ #s. Fixes: 78c73414f4f6 ("USB: ohci: add support for tmio-ohci cell") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/402e1a45-a0a4-0e08-566a-7ca1331506b1@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22usb: host: xhci-rcar: Don't reload firmware after the completionYoshihiro Shimoda1-0/+7
commit 57f3ffdc11143f56f1314972fe86fe17a0dcde85 upstream. According to the datasheet, "Upon the completion of FW Download, there is no need to write or reload FW.". Otherwise, it's possible to cause unexpected behaviors. So, adds such a condition. Fixes: 4ac8918f3a73 ("usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers") Cc: stable@vger.kernel.org # v3.17+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210827063227.81990-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15USB:ehci:fix Kunpeng920 ehci hardware problemLongfang Liu1-0/+3
commit 26b75952ca0b8b4b3050adb9582c8e2f44d49687 upstream. Kunpeng920's EHCI controller does not have SBRN register. Reading the SBRN register when the controller driver is initialized will get 0. When rebooting the EHCI driver, ehci_shutdown() will be called. if the sbrn flag is 0, ehci_shutdown() will return directly. The sbrn flag being 0 will cause the EHCI interrupt signal to not be turned off after reboot. this interrupt that is not closed will cause an exception to the device sharing the interrupt. Therefore, the EHCI controller of Kunpeng920 needs to skip the read operation of the SBRN register. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Link: https://lore.kernel.org/r/1617958081-17999-1-git-send-email-liulongfang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>