summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)AuthorFilesLines
2020-02-28xhci: apply XHCI_PME_STUCK_QUIRK to Intel Comet Lake platformsMathias Nyman1-1/+3
commit a3ae87dce3a5abe0b57c811bab02b2564b574106 upstream. Intel Comet Lake based platform require the XHCI_PME_STUCK_QUIRK quirk as well. Without this xHC can not enter D3 in runtime suspend. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28usb: host: xhci: update event ring dequeue pointer on purposePeter Chen1-17/+43
commit dc0ffbea5729a3abafa577ebfce87f18b79e294b upstream. On some situations, the software handles TRB events slower than adding TRBs, then xhci_handle_event can't return zero long time, the xHC will consider the event ring is full, and trigger "Event Ring Full" error, but in fact, the software has already finished lots of events, just no chance to update ERDP (event ring dequeue pointer). In this commit, we force update ERDP if half of TRBS_PER_SEGMENT events have handled to avoid "Event Ring Full" error. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1573836603-10871-2-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28xhci: Fix memory leak when caching protocol extended capability PSI tables - ↵Mathias Nyman3-33/+67
take 2 commit cf0ee7c60c89641f6e4d1d3c7867fe32b9e30300 upstream. xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com> Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable <stable@vger.kernel.org> # v4.4+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200211150158.14475-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28xhci: fix runtime pm enabling for quirky Intel hostsMathias Nyman1-3/+3
commit 024d411e9c5d49eb96c825af52a3ce2682895676 upstream. Intel hosts that need the XHCI_PME_STUCK_QUIRK flag should enable runtime pm by calling xhci_pme_acpi_rtd3_enable() before usb_hcd_pci_probe() calls pci_dev_run_wake(). Otherwise usage count for the device won't be decreased, and runtime suspend is prevented. usb_hcd_pci_probe() only decreases the usage count if device can generate run-time wake-up events, i.e. when pci_dev_run_wake() returns true. This issue was exposed by pci_dev_run_wake() change in commit 8feaec33b986 ("PCI / PM: Always check PME wakeup capability for runtime wakeup support") and should be backported to kernels with that change Cc: <stable@vger.kernel.org> # 4.13+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28xhci: Force Maximum Packet size for Full-speed bulk devices to valid range.Mathias Nyman1-3/+9
commit f148b9f402ef002b57bcff3964d45abc8ffb6c3f upstream. A Full-speed bulk USB audio device (DJ-Tech CTRL) with a invalid Maximum Packet Size of 4 causes a xHC "Parameter Error" at enumeration. This is because valid Maximum packet sizes for Full-speed bulk endpoints are 8, 16, 32 and 64 bytes. Hosts are not required to support other values than these. See usb 2 specs section 5.8.3 for details. The device starts working after forcing the maximum packet size to 8. This is most likely the case with other devices as well, so force the maximum packet size to a valid range. Cc: stable@vger.kernel.org Reported-by: Rene D Obermueller <cmdrrdo@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-27usb: host: xhci-hub: fix extra endianness conversionRuslan Bilovol1-1/+1
[ Upstream commit 6269e4c76eacabaea0d0099200ae1a455768d208 ] Don't do extra cpu_to_le32 conversion for put_unaligned_le32 because it is already implemented in this function. Fixes sparse error: xhci-hub.c:1152:44: warning: incorrect type in argument 1 (different base types) xhci-hub.c:1152:44: expected unsigned int [usertype] val xhci-hub.c:1152:44: got restricted __le32 [usertype] Fixes: 395f540 "xhci: support new USB 3.1 hub request to get extended port status" Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Link: https://lore.kernel.org/r/1562501839-26522-1-git-send-email-ruslan.bilovol@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31USB: EHCI: Do not return -EPIPE when hub is disconnectedErkka Talvitie1-1/+12
commit 64cc3f12d1c7dd054a215bc1ff9cc2abcfe35832 upstream. When disconnecting a USB hub that has some child device(s) connected to it (such as a USB mouse), then the stack tries to clear halt and reset device(s) which are _already_ physically disconnected. The issue has been reproduced with: CPU: IMX6D5EYM10AD or MCIMX6D5EYM10AE. SW: U-Boot 2019.07 and kernel 4.19.40. CPU: HP Proliant Microserver Gen8. SW: Linux version 4.2.3-300.fc23.x86_64 In this situation there will be error bit for MMF active yet the CERR equals EHCI_TUNE_CERR + halt. Existing implementation interprets this as a stall [1] (chapter 8.4.5). The possible conditions when the MMF will be active + halt can be found from [2] (Table 4-13). Fix for the issue is to check whether MMF is active and PID Code is IN before checking for the stall. If these conditions are true then it is not a stall. What happens after the fix is that when disconnecting a hub with attached device(s) the situation is not interpret as a stall. [1] [https://www.usb.org/document-library/usb-20-specification, usb_20.pdf] [2] [https://www.intel.com/content/dam/www/public/us/en/documents/ technical-specifications/ehci-specification-for-usb.pdf] Signed-off-by: Erkka Talvitie <erkka.talvitie@vincit.fi> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ef70941d5f349767f19c0ed26b0dd9eed8ad81bb.1576050523.git.erkka.talvitie@vincit.fi Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31usb: xhci: Fix build warning seen with CONFIG_PM=nGuenter Roeck1-1/+1
[ Upstream commit 6056a0f8ede27b296d10ef46f7f677cc9d715371 ] The following build warning is seen if CONFIG_PM is disabled. drivers/usb/host/xhci-pci.c:498:13: warning: unused function 'xhci_pci_shutdown' Fixes: f2c710f7dca8 ("usb: xhci: only set D3hot for pci device") Cc: Henry Lin <henryl@nvidia.com> Cc: stable@vger.kernel.org # all stable releases with f2c710f7dca8 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-21xhci: fix USB3 device initiated resume race with roothub autosuspendMathias Nyman2-2/+9
commit 057d476fff778f1d3b9f861fdb5437ea1a3cfc99 upstream. A race in xhci USB3 remote wake handling may force device back to suspend after it initiated resume siganaling, causing a missed resume event or warm reset of device. When a USB3 link completes resume signaling and goes to enabled (UO) state a interrupt is issued and the interrupt handler will clear the bus_state->port_remote_wakeup resume flag, allowing bus suspend. If the USB3 roothub thread just finished reading port status before the interrupt, finding ports still in suspended (U3) state, but hasn't yet started suspending the hub, then the xhci interrupt handler will clear the flag that prevented roothub suspend and allow bus to suspend, forcing all port links back to suspended (U3) state. Example case: usb_runtime_suspend() # because all ports still show suspended U3 usb_suspend_both() hub_suspend(); # successful as hub->wakeup_bits not set yet ==> INTERRUPT xhci_irq() handle_port_status() clear bus_state->port_remote_wakeup usb_wakeup_notification() sets hub->wakeup_bits; kick_hub_wq() <== END INTERRUPT hcd_bus_suspend() xhci_bus_suspend() # success as port_remote_wakeup bits cleared Fix this by increasing roothub usage count during port resume to prevent roothub autosuspend, and by making sure bus_state->port_remote_wakeup flag is only cleared after resume completion is visible, i.e. after xhci roothub returned U0 or other non-U3 link state link on a get port status request. Issue rootcaused by Chiasheng Lee Cc: <stable@vger.kernel.org> Cc: Lee, Hou-hsun <hou-hsun.lee@intel.com> Reported-by: Lee, Chiasheng <chiasheng.lee@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17xhci: make sure interrupts are restored to correct stateMathias Nyman1-4/+4
[ Upstream commit bd82873f23c9a6ad834348f8b83f3b6a5bca2c65 ] spin_unlock_irqrestore() might be called with stale flags after reading port status, possibly restoring interrupts to a incorrect state. If a usb2 port just finished resuming while the port status is read the spin lock will be temporary released and re-acquired in a separate function. The flags parameter is passed as value instead of a pointer, not updating flags properly before the final spin_unlock_irqrestore() is called. Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.Mathias Nyman1-1/+2
commit 7ff11162808cc2ec66353fc012c58bb449c892c3 upstream. xhci driver claims it needs XHCI_TRUST_TX_LENGTH quirk for both Broadcom/Cavium and a Renesas xHC controllers. The quirk was inteded for handling false "success" complete event for transfers that had data left untransferred. These transfers should complete with "short packet" events instead. In these two new cases the false "success" completion is reported after a "short packet" if the TD consists of several TRBs. xHCI specs 4.10.1.1.2 say remaining TRBs should report "short packet" as well after the first short packet in a TD, but this issue seems so common it doesn't make sense to add the quirk for all vendors. Turn these events into short packets automatically instead. This gets rid of the "The WARN Successful completion on short TX for slot 1 ep 1: needs XHCI_TRUST_TX_LENGTH quirk" warning in many cases. Cc: <stable@vger.kernel.org> Reported-by: Eli Billauer <eli.billauer@gmail.com> Reported-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Eli Billauer <eli.billauer@gmail.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17xhci: Increase STS_HALT timeout in xhci_suspend()Kai-Heng Feng1-1/+1
commit 7c67cf6658cec70d8a43229f2ce74ca1443dc95e upstream. I've recently observed failed xHCI suspend attempt on AMD Raven Ridge system: kernel: xhci_hcd 0000:04:00.4: WARN: xHC CMD_RUN timeout kernel: PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 kernel: PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 kernel: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110 kernel: PM: Device 0000:04:00.4 failed to suspend async: error -110 Similar to commit ac343366846a ("xhci: Increase STS_SAVE timeout in xhci_suspend()") we also need to increase the HALT timeout to make it be able to suspend again. Cc: <stable@vger.kernel.org> # 5.2+ Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17xhci: Fix memory leak in xhci_add_in_port()Mika Westerberg1-0/+4
commit ce91f1a43b37463f517155bdfbd525eb43adbd1a upstream. When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: xhci: only set D3hot for pci deviceHenry Lin3-5/+16
commit f2c710f7dca8457e88b4ac9de2060f011254f9dd upstream. Xhci driver cannot call pci_set_power_state() on non-pci xhci host controllers. For example, NVIDIA Tegra XHCI host controller which acts as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform hits this issue during shutdown. Cc: <stable@vger.kernel.org> Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05usb: ehci-omap: Fix deferred probe for phy handlingRoger Quadros1-3/+4
[ Upstream commit 8dc7623bf608495b6e6743e805807c7840673573 ] PHY model is being used on omap5 platforms even if port mode is not OMAP_EHCI_PORT_MODE_PHY. So don't guess if PHY is required or not based on PHY mode. If PHY is provided in device tree, it must be required. So, if devm_usb_get_phy_by_phandle() gives us an error code other than -ENODEV (no PHY) then error out. This fixes USB Ethernet on omap5-uevm if PHY happens to probe after EHCI thus causing a -EPROBE_DEFER. Cc: Johan Hovold <johan@kernel.org> Cc: Ladislav Michl <ladis@linux-mips.org> Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20usb: xhci-mtk: fix ISOC error when interval is zeroChunfeng Yun1-1/+3
[ Upstream commit 87173acc0d8f0987bda8827da35fff67f52ad15d ] If the interval equal zero, needn't round up to power of two for the number of packets in each ESIT, so fix it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-06usb: xhci: fix __le32/__le64 accessors in debugfs codeBen Dooks (Codethink)1-12/+12
commit d5501d5c29a2e684640507cfee428178d6fd82ca upstream. It looks like some of the xhci debug code is passing u32 to functions directly from __le32/__le64 fields. Fix this by using le{32,64}_to_cpu() on these to fix the following sparse warnings; xhci-debugfs.c:205:62: warning: incorrect type in argument 1 (different base types) xhci-debugfs.c:205:62: expected unsigned int [usertype] field0 xhci-debugfs.c:205:62: got restricted __le32 xhci-debugfs.c:206:62: warning: incorrect type in argument 2 (different base types) xhci-debugfs.c:206:62: expected unsigned int [usertype] field1 xhci-debugfs.c:206:62: got restricted __le32 ... [Trim down commit message, sparse warnings were similar -Mathias] Cc: <stable@vger.kernel.org> # 4.15+ Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1572013829-14044-4-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17xhci: Increase STS_SAVE timeout in xhci_suspend()Kai-Heng Feng1-1/+1
commit ac343366846a445bb81f0a0e8f16abb8bd5d5d88 upstream. After commit f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()"), ASMedia xHCI may fail to suspend. Although the algorithms are essentially the same, the old max timeout is (usec + usec * time of doing readl()), and the new max timeout is just usec, which is much less than the old one. Increase the timeout to make ASMedia xHCI able to suspend again. BugLink: https://bugs.launchpad.net/bugs/1844021 Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-8-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17xhci: Prevent deadlock when xhci adapter breaks during initBill Kuzeja1-2/+21
commit 8de66b0e6a56ff10dd00d2b0f2ae52e300178587 upstream. The system can hit a deadlock if an xhci adapter breaks while initializing. The deadlock is between two threads: thread 1 is tearing down the adapter and is stuck in usb_unlocked_disable_lpm waiting to lock the hcd->handwidth_mutex. Thread 2 is holding this mutex (while still trying to add a usb device), but is stuck in xhci_endpoint_reset waiting for a stop or config command to complete. A reboot is required to resolve. It turns out when calling xhci_queue_stop_endpoint and xhci_queue_configure_endpoint in xhci_endpoint_reset, the return code is not checked for errors. If the timing is right and the adapter dies just before either of these commands get issued, we hang indefinitely waiting for a completion on a command that didn't get issued. This wasn't a problem before the following fix because we didn't send commands in xhci_endpoint_reset: commit f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") With the patch I am submitting, a duration test which breaks adapters during initialization (and which deadlocks with the standard kernel) runs without issue. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: <stable@vger.kernel.org> # v4.17+ Cc: Torez Smith <torez@redhat.com> Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com> Signed-off-by: Torez Smith <torez@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-7-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17usb: xhci: wait for CNR controller not ready bit in xhci resumeRick Tseng1-0/+12
commit a70bcbc322837eda1ab5994d12db941dc9733a7d upstream. NVIDIA 3.1 xHCI card would lose power when moving power state into D3Cold. Thus we need to wait for CNR bit to clear in xhci resume, just as in xhci init. [Minor changes to comment and commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Rick Tseng <rtseng@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-6-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17xhci: Fix USB 3.1 capability detection on early xHCI 1.1 spec based hostsMathias Nyman1-4/+11
commit 47f50d61076523e1a0d5a070062c2311320eeca8 upstream. Early xHCI 1.1 spec did not mention USB 3.1 capable hosts should set sbrn to 0x31, or that the minor revision is a two digit BCD containing minor and sub-minor numbers. This was later clarified in xHCI 1.2. Some USB 3.1 capable hosts therefore have sbrn set to 0x30, or minor revision set to 0x1 instead of 0x10. Detect the USB 3.1 capability correctly for these hosts as well Fixes: ddd57980a0fd ("xhci: detect USB 3.2 capable host controllers correctly") Cc: <stable@vger.kernel.org> # v4.18+ Cc: Loïc Yhuel <loic.yhuel@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-5-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17xhci: Check all endpoints for LPM timeoutJan Schmidt1-4/+4
commit d500c63f80f2ea08ee300e57da5f2af1c13875f5 upstream. If an endpoint is encountered that returns USB3_LPM_DEVICE_INITIATED, keep checking further endpoints, as there might be periodic endpoints later that return USB3_LPM_DISABLED due to shorter service intervals. Without this, the code can set too high a maximum-exit-latency and prevent the use of multiple USB3 cameras that should be able to work. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Schmidt <jan@centricular.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-4-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17xhci: Prevent device initiated U1/U2 link pm if exit latency is too longMathias Nyman1-4/+6
commit cd9d9491e835a845c1a98b8471f88d26285e0bb9 upstream. If host/hub initiated link pm is prevented by a driver flag we still must ensure that periodic endpoints have longer service intervals than link pm exit latency before allowing device initiated link pm. Fix this by continue walking and checking endpoint service interval if xhci_get_timeout_no_hub_lpm() returns anything else than USB3_LPM_DISABLED While at it fix the split line error message Tested-by: Jan Schmidt <jan@centricular.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-3-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17xhci: Fix false warning message about wrong bounce buffer write lengthMathias Nyman1-2/+2
commit c03101ff4f74bb30679c1a03d551ecbef1024bf6 upstream. The check printing out the "WARN Wrong bounce buffer write length:" uses incorrect values when comparing bytes written from scatterlist to bounce buffer. Actual copied lengths are fine. The used seg->bounce_len will be set to equal new_buf_len a few lines later in the code, but is incorrect when doing the comparison. The patch which added this false warning was backported to 4.8+ kernels so this should be backported as far as well. Cc: <stable@vger.kernel.org> # v4.8+ Fixes: 597c56e372da ("xhci: update bounce buffer with correct sg num") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-2-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-21usb: host: xhci-tegra: Set DMA mask correctlyNagarjuna Kristam1-0/+10
[ Upstream commit 993cc8753453fccfe060a535bbe21fcf1001b626 ] The Falcon microcontroller that runs the XUSB firmware and which is responsible for exposing the XHCI interface can address only 40 bits of memory. Typically that's not a problem because Tegra devices don't have enough system memory to exceed those 40 bits. However, if the ARM SMMU is enable on Tegra186 and later, the addresses passed to the XUSB controller can be anywhere in the 48-bit IOV address space of the ARM SMMU. Since the DMA/IOMMU API starts allocating from the top of the IOVA space, the Falcon microcontroller is not able to load the firmware successfully. Fix this by setting the DMA mask to 40 bits, which will force the DMA API to map the buffer for the firmware to an IOVA that is addressable by the Falcon. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/1566989697-13049-1-git-send-email-nkristam@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-06usb: host: xhci: rcar: Fix typo in compatible string matchingGeert Uytterhoeven1-1/+1
commit 636bd02a7ba9025ff851d0cfb92768c8fa865859 upstream. It's spelled "renesas", not "renensas". Due to this typo, RZ/G1M and RZ/G1N were not covered by the check. Fixes: 2dc240a3308b ("usb: host: xhci: rcar: retire use of xhci_plat_type_is()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable <stable@vger.kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20190827125112.12192-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-06usb: host: ohci: fix a race condition between shutdown and irqYoshihiro Shimoda1-3/+12
commit a349b95d7ca0cea71be4a7dac29830703de7eb62 upstream. This patch fixes an issue that the following error is possible to happen when ohci hardware causes an interruption and the system is shutting down at the same time. [ 34.851754] usb 2-1: USB disconnect, device number 2 [ 35.166658] irq 156: nobody cared (try booting with the "irqpoll" option) [ 35.173445] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 5.3.0-rc5 #85 [ 35.179964] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 35.187886] Workqueue: usb_hub_wq hub_event [ 35.192063] Call trace: [ 35.194509] dump_backtrace+0x0/0x150 [ 35.198165] show_stack+0x14/0x20 [ 35.201475] dump_stack+0xa0/0xc4 [ 35.204785] __report_bad_irq+0x34/0xe8 [ 35.208614] note_interrupt+0x2cc/0x318 [ 35.212446] handle_irq_event_percpu+0x5c/0x88 [ 35.216883] handle_irq_event+0x48/0x78 [ 35.220712] handle_fasteoi_irq+0xb4/0x188 [ 35.224802] generic_handle_irq+0x24/0x38 [ 35.228804] __handle_domain_irq+0x5c/0xb0 [ 35.232893] gic_handle_irq+0x58/0xa8 [ 35.236548] el1_irq+0xb8/0x180 [ 35.239681] __do_softirq+0x94/0x23c [ 35.243253] irq_exit+0xd0/0xd8 [ 35.246387] __handle_domain_irq+0x60/0xb0 [ 35.250475] gic_handle_irq+0x58/0xa8 [ 35.254130] el1_irq+0xb8/0x180 [ 35.257268] kernfs_find_ns+0x5c/0x120 [ 35.261010] kernfs_find_and_get_ns+0x3c/0x60 [ 35.265361] sysfs_unmerge_group+0x20/0x68 [ 35.269454] dpm_sysfs_remove+0x2c/0x68 [ 35.273284] device_del+0x80/0x370 [ 35.276683] hid_destroy_device+0x28/0x60 [ 35.280686] usbhid_disconnect+0x4c/0x80 [ 35.284602] usb_unbind_interface+0x6c/0x268 [ 35.288867] device_release_driver_internal+0xe4/0x1b0 [ 35.293998] device_release_driver+0x14/0x20 [ 35.298261] bus_remove_device+0x110/0x128 [ 35.302350] device_del+0x148/0x370 [ 35.305832] usb_disable_device+0x8c/0x1d0 [ 35.309921] usb_disconnect+0xc8/0x2d0 [ 35.313663] hub_event+0x6e0/0x1128 [ 35.317146] process_one_work+0x1e0/0x320 [ 35.321148] worker_thread+0x40/0x450 [ 35.324805] kthread+0x124/0x128 [ 35.328027] ret_from_fork+0x10/0x18 [ 35.331594] handlers: [ 35.333862] [<0000000079300c1d>] usb_hcd_irq [ 35.338126] [<0000000079300c1d>] usb_hcd_irq [ 35.342389] Disabling IRQ #156 ohci_shutdown() disables all the interrupt and rh_state is set to OHCI_RH_HALTED. In other hand, ohci_irq() is possible to enable OHCI_INTR_SF and OHCI_INTR_MIE on ohci_irq(). Note that OHCI_INTR_SF is possible to be set by start_ed_unlink() which is called: ohci_irq() -> process_done_list() -> takeback_td() -> start_ed_unlink() So, ohci_irq() has the following condition, the issue happens by &ohci->regs->intrenable = OHCI_INTR_MIE | OHCI_INTR_SF and ohci->rh_state = OHCI_RH_HALTED: /* interrupt for some other device? */ if (ints == 0 || unlikely(ohci->rh_state == OHCI_RH_HALTED)) return IRQ_NOTMINE; To fix the issue, ohci_shutdown() holds the spin lock while disabling the interruption and changing the rh_state flag to prevent reenable the OHCI_INTR_MIE unexpectedly. Note that io_watchdog_func() also calls the ohci_shutdown() and it already held the spin lock, so that the patch makes a new function as _ohci_shutdown(). This patch is inspired by a Renesas R-Car Gen3 BSP patch from Tho Vu. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1566877910-6020-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-06usb: host: fotg2: restart hcd after port resetHans Ulli Kroll1-0/+4
[ Upstream commit 777758888ffe59ef754cc39ab2f275dc277732f4 ] On the Gemini SoC the FOTG2 stalls after port reset so restart the HCD after each port reset. Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-16usb: host: xhci-rcar: Fix timeout in xhci_suspend()Yoshihiro Shimoda1-2/+7
commit 783bda5e41acc71f98336e1a402c180f9748e5dc upstream. When a USB device is connected to the host controller and the system enters suspend, the following error happens in xhci_suspend(): xhci-hcd ee000000.usb: WARN: xHC CMD_RUN timeout Since the firmware/internal CPU control the USBSTS.STS_HALT and the process speed is down when the roothub port enters U3, long delay for the handshake of STS_HALT is neeed in xhci_suspend(). So, this patch adds to set the XHCI_SLOW_SUSPEND. Fixes: 435cc1138ec9 ("usb: host: xhci-plat: set resume_quirk() for R-Car controllers") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1564734815-17964-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31usb: pci-quirks: Correct AMD PLL quirk detectionRyan Kennedy1-12/+19
commit f3dccdaade4118070a3a47bef6b18321431f9ac6 upstream. The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787ef. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31usb: wusbcore: fix unbalanced get/put cluster_idPhong Tran1-1/+1
commit f90bf1ece48a736097ea224430578fe586a9544c upstream. syzboot reported that https://syzkaller.appspot.com/bug?extid=fd2bd7df88c606eea4ef There is not consitency parameter in cluste_id_get/put calling. In case of getting the id with result is failure, the wusbhc->cluster_id will not be updated and this can not be used for wusb_cluster_id_put(). Tested report https://groups.google.com/d/msg/syzkaller-bugs/0znZopp3-9k/oxOrhLkLEgAJ Reproduce and gdb got the details: 139 addr = wusb_cluster_id_get(); (gdb) n 140 if (addr == 0) (gdb) print addr $1 = 254 '\376' (gdb) n 142 result = __hwahc_set_cluster_id(hwahc, addr); (gdb) print result $2 = -71 (gdb) break wusb_cluster_id_put Breakpoint 3 at 0xffffffff836e3f20: file drivers/usb/wusbcore/wusbhc.c, line 384. (gdb) s Thread 2 hit Breakpoint 3, wusb_cluster_id_put (id=0 '\000') at drivers/usb/wusbcore/wusbhc.c:384 384 id = 0xff - id; (gdb) n 385 BUG_ON(id >= CLUSTER_IDS); (gdb) print id $3 = 255 '\377' Reported-by: syzbot+fd2bd7df88c606eea4ef@syzkaller.appspotmail.com Signed-off-by: Phong Tran <tranmanphong@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190724020601.15257-1-tranmanphong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25usb: xhci: Don't try to recover an endpoint if port is in error state.Mathias Nyman3-1/+28
commit b8c3b718087bf7c3c8e388eb1f72ac1108a4926e upstream. A USB3 device needs to be reset and re-enumarated if the port it connects to goes to a error state, with link state inactive. There is no use in trying to recover failed transactions by resetting endpoints at this stage. Tests show that in rare cases, after multiple endpoint resets of a roothub port the whole host controller might stop completely. Several retries to recover from transaction error can happen as it can take a long time before the hub thread discovers the USB3 port error and inactive link. We can't reliably detect the port error from slot or endpoint context due to a limitation in xhci, see xhci specs section 4.8.3: "There are several cases where the EP State field in the Output Endpoint Context may not reflect the current state of an endpoint" and "Software should maintain an accurate value for EP State, by tracking it with an internal variable that is driven by Events and Doorbell accesses" Same appears to be true for slot state. set a flag to the corresponding slot if a USB3 roothub port link goes inactive to prevent both queueing new URBs and resetting endpoints. Reported-by: Rapolu Chiranjeevi <chiranjeevi.rapolu@intel.com> Tested-by: Rapolu Chiranjeevi <chiranjeevi.rapolu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25xhci: detect USB 3.2 capable host controllers correctlyMathias Nyman1-5/+15
commit ddd57980a0fde30f7b5d14b888a2cc84d01610e8 upstream. USB 3.2 capability in a host can be detected from the xHCI Supported Protocol Capability major and minor revision fields. If major is 0x3 and minor 0x20 then the host is USB 3.2 capable. For USB 3.2 capable hosts set the root hub lane count to 2. The Major Revision and Minor Revision fields contain a BCD version number. The value of the Major Revision field is JJh and the value of the Minor Revision field is MNh for version JJ.M.N, where JJ = major revision number, M - minor version number, N = sub-minor version number, e.g. version 3.1 is represented with a value of 0310h. Also fix the extra whitespace printed out when announcing regular SuperSpeed hosts. Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-22usb: xhci: Fix a potential null pointer dereference in ↵Jia-Ju Bai1-0/+3
xhci_debugfs_create_endpoint() [ Upstream commit 5bce256f0b528624a34fe907db385133bb7be33e ] In xhci_debugfs_create_slot(), kzalloc() can fail and dev->debugfs_private will be NULL. In xhci_debugfs_create_endpoint(), dev->debugfs_private is used without any null-pointer check, and can cause a null pointer dereference. To fix this bug, a null-pointer check is added in xhci_debugfs_create_endpoint(). This bug is found by a runtime fuzzing tool named FIZZER written by us. [subjet line change change, add potential -Mathais] Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-09usb: xhci: avoid null pointer deref when bos field is NULLCarsten Schmid1-1/+1
commit 7aa1bb2ffd84d6b9b5f546b079bb15cd0ab6e76e upstream. With defective USB sticks we see the following error happen: usb 1-3: new high-speed USB device number 6 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: device descriptor read/64, error -71 usb 1-3: new high-speed USB device number 7 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: unable to get BOS descriptor set usb 1-3: New USB device found, idVendor=0781, idProduct=5581 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 ... BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 This comes from the following place: [ 1660.215380] IP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.222092] PGD 0 P4D 0 [ 1660.224918] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 1660.425520] CPU: 1 PID: 38 Comm: kworker/1:1 Tainted: P U W O 4.14.67-apl #1 [ 1660.434277] Workqueue: usb_hub_wq hub_event [usbcore] [ 1660.439918] task: ffffa295b6ae4c80 task.stack: ffffad4580150000 [ 1660.446532] RIP: 0010:xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.453821] RSP: 0018:ffffad4580153c70 EFLAGS: 00010046 [ 1660.459655] RAX: 0000000000000000 RBX: ffffa295b4d7c000 RCX: 0000000000000002 [ 1660.467625] RDX: 0000000000000002 RSI: ffffffff984a55b2 RDI: ffffffff984a55b2 [ 1660.475586] RBP: ffffad4580153cc8 R08: 0000000000d6520a R09: 0000000000000001 [ 1660.483556] R10: ffffad4580a004a0 R11: 0000000000000286 R12: ffffa295b4d7c000 [ 1660.491525] R13: 0000000000010648 R14: ffffa295a84e1800 R15: 0000000000000000 [ 1660.499494] FS: 0000000000000000(0000) GS:ffffa295bfc80000(0000) knlGS:0000000000000000 [ 1660.508530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1660.514947] CR2: 0000000000000008 CR3: 000000025a114000 CR4: 00000000003406a0 [ 1660.522917] Call Trace: [ 1660.525657] usb_set_usb2_hardware_lpm+0x3d/0x70 [usbcore] [ 1660.531792] usb_disable_device+0x242/0x260 [usbcore] [ 1660.537439] usb_disconnect+0xc1/0x2b0 [usbcore] [ 1660.542600] hub_event+0x596/0x18f0 [usbcore] [ 1660.547467] ? trace_preempt_on+0xdf/0x100 [ 1660.552040] ? process_one_work+0x1c1/0x410 [ 1660.556708] process_one_work+0x1d2/0x410 [ 1660.561184] ? preempt_count_add.part.3+0x21/0x60 [ 1660.566436] worker_thread+0x2d/0x3f0 [ 1660.570522] kthread+0x122/0x140 [ 1660.574123] ? process_one_work+0x410/0x410 [ 1660.578792] ? kthread_create_on_node+0x60/0x60 [ 1660.583849] ret_from_fork+0x3a/0x50 [ 1660.587839] Code: 00 49 89 c3 49 8b 84 24 50 16 00 00 8d 4a ff 48 8d 04 c8 48 89 ca 4c 8b 10 45 8b 6a 04 48 8b 00 48 89 45 c0 49 8b 86 80 03 00 00 <48> 8b 40 08 8b 40 03 0f 1f 44 00 00 45 85 ff 0f 84 81 01 00 00 [ 1660.608980] RIP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] RSP: ffffad4580153c70 [ 1660.617921] CR2: 0000000000000008 Tracking this down shows that udev->bos is NULL in the following code: (xhci.c, in xhci_set_usb2_hardware_lpm) field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); <<<<<<< here xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num + 1); if (enable) { /* Host supports BESL timeout instead of HIRD */ if (udev->usb2_hw_lpm_besl_capable) { /* if device doesn't have a preferred BESL value use a * default one which works with mixed HIRD and BESL * systems. See XHCI_DEFAULT_BESL definition in xhci.h */ if ((field & USB_BESL_SUPPORT) && (field & USB_BESL_BASELINE_VALID)) hird = USB_GET_BESL_BASELINE(field); else hird = udev->l1_params.besl; The failing case is when disabling LPM. So it is sufficient to avoid access to udev->bos by moving the instruction into the "enable" clause. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Carsten Schmid <carsten_schmid@mentor.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-09xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()Andrey Smirnov1-12/+10
commit f7fac17ca925faa03fc5eb854c081a24075f8bad upstream. Xhci_handshake() implements the algorithm already captured by readl_poll_timeout_atomic(). Convert the former to use the latter to avoid repetition. Turned out this patch also fixes a bug on the AMD Stoneyridge platform where usleep(1) sometimes takes over 10ms. This means a 5 second timeout can easily take over 15 seconds which will trigger the watchdog and reboot the system. [Add info about patch fixing a bug to commit message -Mathias] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Raul E Rangel <rrangel@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-09xhci: Use %zu for printing size_t typeFabio Estevam1-2/+2
commit c1a145a3ed9a40f3b6145feb97789e8eb49c5566 upstream. Commit 597c56e372da ("xhci: update bounce buffer with correct sg num") caused the following build warnings: drivers/usb/host/xhci-ring.c:676:19: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'size_t {aka unsigned int}' [-Wformat=] Use %zu for printing size_t type in order to fix the warnings. Fixes: 597c56e372da ("xhci: update bounce buffer with correct sg num") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-09xhci: update bounce buffer with correct sg numHenry Lin1-4/+13
commit 597c56e372dab2c7f79b8d700aad3a5deebf9d1b upstream. This change fixes a data corruption issue occurred on USB hard disk for the case that bounce buffer is used during transferring data. While updating data between sg list and bounce buffer, current implementation passes mapped sg number (urb->num_mapped_sgs) to sg_pcopy_from_buffer() and sg_pcopy_to_buffer(). This causes data not get copied if target buffer is located in the elements after mapped sg elements. This change passes sg number for full list to fix issue. Besides, for copying data from bounce buffer, calling dma_unmap_single() on the bounce buffer before copying data to sg list can avoid cache issue. Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-04usb: u132-hcd: fix resource leakMukesh Ojha1-0/+3
[ Upstream commit f276e002793cdb820862e8ea8f76769d56bba575 ] if platform_driver_register fails, cleanup the allocated resource gracefully. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2019-04-03xhci: Don't let USB3 ports stuck in polling state prevent suspendMathias Nyman2-7/+20
commit d92f2c59cc2cbca6bfb2cc54882b58ba76b15fd4 upstream. Commit 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") was intended to prevent ports that were still link training from being forced to U3 suspend state mid enumeration. This solved enumeration issues for devices with slow link training. Turns out some devices are stuck in the link training/polling state, and thus that patch will prevent suspend completely for these devices. This is seen with USB3 card readers in some MacBooks. Instead of preventing suspend, give some time to complete the link training. On successful training the port will end up as connected and enabled. If port instead is stuck in link training the bus suspend will continue suspending after 360ms (10 * 36ms) timeout (tPollingLFPSTimeout). Original patch was sent to stable, this one should go there as well Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03usb: xhci: dbc: Don't free all memory with spinlock heldMathias Nyman1-2/+3
commit 8867ea262196a6945c24a0fb739575af646ec0e9 upstream. The xhci debug capability (DbC) feature did its memory cleanup with spinlock held. dma_free_coherent() warns if called with interrupts disabled move the memory cleanup outside the spinlock Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03xhci: Fix port resume done detection for SS ports with LPM enabledMathias Nyman1-3/+6
commit 6cbcf596934c8e16d6288c7cc62dfb7ad8eadf15 upstream. A suspended SS port in U3 link state will go to U0 when resumed, but can almost immediately after that enter U1 or U2 link power save states before host controller driver reads the port status. Host controller driver only checks for U0 state, and might miss the finished resume, leaving flags unclear and skip notifying usb code of the wake. Add U1 and U2 to the possible link states when checking for finished port resume. Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03usb: host: xhci-rcar: Add XHCI_TRUST_TX_LENGTH quirkYasushi Asano1-0/+1
commit 40fc165304f0faaae78b761f8ee30b5d216b1850 upstream. When plugging BUFFALO LUA4-U3-AGT USB3.0 to Gigabit Ethernet LAN Adapter, warning messages filled up dmesg. [ 101.098287] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk? [ 101.117463] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk? [ 101.136513] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk? Adding the XHCI_TRUST_TX_LENGTH quirk resolves the issue. Signed-off-by: Yasushi Asano <yasano@jp.adit-jv.com> Signed-off-by: Spyridon Papageorgiou <spapageorgiou@de.adit-jv.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-10usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCIBalaji Manoharan1-0/+1
commit 8fde481ef3674ae5ad0dbfef4df18ff507c5675a upstream. This fix enables USB role feature on intel commercial nuc platform which is based on Kabylake chipset. Signed-off-by: Balaji Manoharan <m.balaji@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09usb: r8a66597: Fix a possible concurrency use-after-free bug in ↵Jia-Ju Bai1-1/+4
r8a66597_endpoint_disable() commit c85400f886e3d41e69966470879f635a2b50084c upstream. The function r8a66597_endpoint_disable() and r8a66597_urb_enqueue() may be concurrently executed. The two functions both access a possible shared variable "hep->hcpriv". This shared variable is freed by r8a66597_endpoint_disable() via the call path: r8a66597_endpoint_disable kfree(hep->hcpriv) (line 1995 in Linux-4.19) This variable is read by r8a66597_urb_enqueue() via the call path: r8a66597_urb_enqueue spin_lock_irqsave(&r8a66597->lock) init_pipe_info enable_r8a66597_pipe pipe = hep->hcpriv (line 802 in Linux-4.19) The read operation is protected by a spinlock, but the free operation is not protected by this spinlock, thus a concurrency use-after-free bug may occur. To fix this bug, the spin-lock and spin-unlock function calls in r8a66597_endpoint_disable() are moved to protect the free operation. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-29USB: xhci: fix 'broken_suspend' placement in struct xchi_hcdNicolas Saenz Julienne1-2/+2
commit 2419f30a4a4fcaa5f35111563b4c61f1b2b26841 upstream. As commented in the struct's definition there shouldn't be anything underneath its 'priv[0]' member as it would break some macros. The patch converts the broken_suspend into a bit-field and relocates it next to to the rest of bit-fields. Fixes: a7d57abcc8a5 ("xhci: workaround CSS timeout on AMD SNPS 3.0 xHC") Reported-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-29xhci: Don't prevent USB2 bus suspend in state check intended for USB3 onlyMathias Nyman1-1/+2
commit 45f750c16cae3625014c14c77bd9005eda975d35 upstream. The code to prevent a bus suspend if a USB3 port was still in link training also reacted to USB2 port polling state. This caused bus suspend to busyloop in some cases. USB2 polling state is different from USB3, and should not prevent bus suspend. Limit the USB3 link training state check to USB3 root hub ports only. The origial commit went to stable so this need to be applied there as well Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13xhci: Prevent U1/U2 link pm states if exit latency is too longMathias Nyman1-0/+16
commit 0472bf06c6fd33c1a18aaead4c8f91e5a03d8d7b upstream. Don't allow USB3 U1 or U2 if the latency to wake up from the U-state reaches the service interval for a periodic endpoint. This is according to xhci 1.1 specification section 4.23.5.2 extra note: "Software shall ensure that a device is prevented from entering a U-state where its worst case exit latency approaches the ESIT." Allowing too long exit latencies for periodic endpoint confuses xHC internal scheduling, and new devices may fail to enumerate with a "Not enough bandwidth for new device state" error from the host. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13xhci: workaround CSS timeout on AMD SNPS 3.0 xHCSandeep Singh3-4/+29
commit a7d57abcc8a5bdeb53bbf8e87558e8e0a2c2a29d upstream. Occasionally AMD SNPS 3.0 xHC does not respond to CSS when set, also it does not flag anything on SRE and HCE to point the internal xHC errors on USBSTS register. This stalls the entire system wide suspend and there is no point in stalling just because of xHC CSS is not responding. To work around this problem, if the xHC does not flag anything on SRE and HCE, we can skip the CSS timeout and allow the system to continue the suspend. Once the system resume happens we can internally reset the controller using XHCI_RESET_ON_RESUME quirk Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com> cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> Cc: <stable@vger.kernel.org> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13USB: check usb_get_extra_descriptor for proper sizeMathias Payer1-1/+1
commit 704620afc70cf47abb9d6a1a57f3825d2bca49cf upstream. When reading an extra descriptor, we need to properly check the minimum and maximum size allowed, to prevent from invalid data being sent by a device. Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Hui Peng <benquike@gmail.com> Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-13 00:55:40 +0300