| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 74098cc06e753d3ffd8398b040a3a1dfb65260c0 upstream.
This fixup replaces tty_vhangup() call with call to
tty_port_tty_vhangup(). Both calls hangup tty device
synchronously however tty_port_tty_vhangup() increases
reference count during the hangup operation using
scoped_guard(tty_port_tty).
Cc: stable <stable@kernel.org>
Fixes: 1f73b8b56cf3 ("xhci: dbgtty: fix device unregister")
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Link: https://patch.msgid.link/20251127111644.3161386-1-ukaszb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b4c61e542faf8c9131d69ecfc3ad6de96d1b2ab8 upstream.
Make sure to drop the reference taken when looking up the PHY I2C device
during probe on probe failure (e.g. probe deferral) and on driver
unbind.
Fixes: 73108aa90cbf ("USB: ohci-nxp: Use isp1301 driver")
Cc: stable@vger.kernel.org # 3.5
Reported-by: Ma Ke <make24@iscas.ac.cn>
Link: https://lore.kernel.org/lkml/20251117013428.21840-1-make24@iscas.ac.cn/
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e6aec6d9f5794e85d2312497a5d81296d885090e ]
Some old HCs ignore transfer ring link TRBs whose chain bit is unset.
This breaks endpoint operation and sometimes makes it execute other
ring's TDs, which may corrupt their buffers or cause unwanted device
action. We avoid this by chaining all link TRBs on affected rings.
Fix an omission which allows them to be unchained by cancelling TDs.
The patch was tested by reproducing this condition on an isochronous
endpoint (non-power-of-two TDs are sometimes split not to cross 64K)
and printing link TRBs in trb_to_noop() on good and buggy HCs.
Actual hardware malfunction is rare since it requires Missed Service
Error shortly before the unchained link TRB, at least on NEC and AMD.
I have never seen it after commit bb0ba4cb1065 ("usb: xhci: Apply the
link chain quirk on NEC isoc endpoints"), but it's Russian roulette
and I can't test all affected hosts and workloads. Fairly often MSEs
happen after cancellation because the endpoint was stopped.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d34983720155b8f05de765f0183d9b0e1345cc0 ]
run_graceperiod blocks usb 2.0 devices from auto suspending after
xhci_start for 500ms.
Log shows:
[ 13.387170] xhci_hub_control:1271: xhci-hcd PNP0D10:03: Get port status 7-1 read: 0x2a0, return 0x100
[ 13.387177] hub_event:5779: hub 7-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 13.387182] hub_suspend:3903: hub 7-0:1.0: hub_suspend
[ 13.387188] hcd_bus_suspend:2250: usb usb7: bus auto-suspend, wakeup 1
[ 13.387191] hcd_bus_suspend:2279: usb usb7: suspend raced with wakeup event
[ 13.387193] hcd_bus_resume:2303: usb usb7: usb auto-resume
[ 13.387296] hub_event:5779: hub 3-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 13.393343] handle_port_status:2034: xhci-hcd PNP0D10:02: handle_port_status: starting usb5 port polling.
[ 13.393353] xhci_hub_control:1271: xhci-hcd PNP0D10:02: Get port status 5-1 read: 0x206e1, return 0x10101
[ 13.400047] hub_suspend:3903: hub 3-0:1.0: hub_suspend
[ 13.403077] hub_resume:3948: hub 7-0:1.0: hub_resume
[ 13.403080] xhci_hub_control:1271: xhci-hcd PNP0D10:03: Get port status 7-1 read: 0x2a0, return 0x100
[ 13.403085] hub_event:5779: hub 7-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 13.403087] hub_suspend:3903: hub 7-0:1.0: hub_suspend
[ 13.403090] hcd_bus_suspend:2250: usb usb7: bus auto-suspend, wakeup 1
[ 13.403093] hcd_bus_suspend:2279: usb usb7: suspend raced with wakeup event
[ 13.403095] hcd_bus_resume:2303: usb usb7: usb auto-resume
[ 13.405002] handle_port_status:1913: xhci-hcd PNP0D10:04: Port change event, 9-1, id 1, portsc: 0x6e1
[ 13.405016] hub_activate:1169: usb usb5-port1: status 0101 change 0001
[ 13.405026] xhci_clear_port_change_bit:658: xhci-hcd PNP0D10:02: clear port1 connect change, portsc: 0x6e1
[ 13.413275] hcd_bus_suspend:2250: usb usb3: bus auto-suspend, wakeup 1
[ 13.419081] hub_resume:3948: hub 7-0:1.0: hub_resume
[ 13.419086] xhci_hub_control:1271: xhci-hcd PNP0D10:03: Get port status 7-1 read: 0x2a0, return 0x100
[ 13.419095] hub_event:5779: hub 7-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 13.419100] hub_suspend:3903: hub 7-0:1.0: hub_suspend
[ 13.419106] hcd_bus_suspend:2250: usb usb7: bus auto-suspend, wakeup 1
[ 13.419110] hcd_bus_suspend:2279: usb usb7: suspend raced with wakeup event
[ 13.419112] hcd_bus_resume:2303: usb usb7: usb auto-resume
[ 13.420455] handle_port_status:2034: xhci-hcd PNP0D10:04: handle_port_status: starting usb9 port polling.
[ 13.420493] handle_port_status:1913: xhci-hcd PNP0D10:05: Port change event, 10-1, id 1, portsc: 0x6e1
[ 13.425332] hcd_bus_suspend:2279: usb usb3: suspend raced with wakeup event
[ 13.431931] handle_port_status:2034: xhci-hcd PNP0D10:05: handle_port_status: starting usb10 port polling.
[ 13.435080] hub_resume:3948: hub 7-0:1.0: hub_resume
[ 13.435084] xhci_hub_control:1271: xhci-hcd PNP0D10:03: Get port status 7-1 read: 0x2a0, return 0x100
[ 13.435092] hub_event:5779: hub 7-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 13.435096] hub_suspend:3903: hub 7-0:1.0: hub_suspend
[ 13.435102] hcd_bus_suspend:2250: usb usb7: bus auto-suspend, wakeup 1
[ 13.435106] hcd_bus_suspend:2279: usb usb7: suspend raced with wakeup event
usb7 and other usb 2.0 root hub were rapidly toggling between suspend
and resume states. More, "suspend raced with wakeup event" confuses people.
So, limit run_graceperiod for only usb 3.0 devices
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251119142417.2820519-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
When DbC is disconnected then xhci_dbc_tty_unregister_device()
is called. However if there is any user space process blocked
on write to DbC terminal device then it will never be signalled
and thus stay blocked indifinitely.
This fix adds a tty_vhangup() call in xhci_dbc_tty_unregister_device().
The tty_vhangup() wakes up any blocked writers and causes subsequent
write attempts to DbC terminal device to fail.
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Link: https://patch.msgid.link/20251119212910.1245694-1-ukaszb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Uttkarsh Aggarwal observed a kernel panic during sideband un-register
and found it was caused by a race condition between sideband unregister,
and creating sideband interrupters.
The issue occurrs when thread T1 runs uaudio_disconnect() and released
sb->xhci via sideband_unregister, while thread T2 simultaneously accessed
the now-NULL sb->xhci in xhci_sideband_create_interrupter() resulting in
a crash.
Ensure new endpoints or interrupter can't be added to a sidenband after
xhci_sideband_unregister() cleared the existing ones, and unlocked the
sideband mutex.
Reorganize code so that mutex is only taken and released once in
xhci_sideband_unregister(), and clear sb->vdev while mutex is taken.
Use mutex guards to reduce human unlock errors in code
Refuse to add endpoints or interrupter if sb->vdev is not set.
sb->vdev is set when sideband is created and registered.
Reported-by: Uttkarsh Aggarwal <uttkarsh.aggarwal@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-usb/20251028080043.27760-1-uttkarsh.aggarwal@oss.qualcomm.com
Fixes: de66754e9f80 ("xhci: sideband: add initial api to register a secondary interrupter entity")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251107162819.1362579-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Data read from a DbC device may be corrupted due to a race between
ongoing write and write request completion handler both queuing new
transfer blocks (TRBs) if there are remining data in the kfifo.
TRBs may be in incorrct order compared to the data in the kfifo.
Driver fails to keep lock between reading data from kfifo into a
dbc request buffer, and queuing the request to the transfer ring.
This allows completed request to re-queue itself in the middle of
an ongoing transfer loop, forcing itself between a kfifo read and
request TRB write of another request
cpu0 cpu1 (re-queue completed req2)
lock(port_lock)
dbc_start_tx()
kfifo_out(fifo, req1->buffer)
unlock(port_lock)
lock(port_lock)
dbc_write_complete(req2)
dbc_start_tx()
kfifo_out(fifo, req2->buffer)
unlock(port_lock)
lock(port_lock)
req2->trb = ring->enqueue;
ring->enqueue++
unlock(port_lock)
lock(port_lock)
req1->trb = ring->enqueue;
ring->enqueue++
unlock(port_lock)
In the above scenario a kfifo containing "12345678" would read "1234" to
req1 and "5678" to req2, but req2 is queued before req1 leading to
data being transmitted as "56781234"
Solve this by adding a flag that prevents starting a new tx if we
are already mid dbc_start_tx() during the unlocked part.
The already running dbc_do_start_tx() will make sure the newly completed
request gets re-queued as it is added to the request write_pool while
holding the lock.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251107162819.1362579-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A usb device caught behind a link in ss.Inactive error state needs to
be reset to recover. A VDEV_PORT_ERROR flag is used to track this state,
preventing new transfers from being queued until error is cleared.
This flag may be left uncleared if link goes to error state between two
resets, and print the following message:
"xhci_hcd 0000:00:14.0: Can't queue urb, port error, link inactive"
Fix setting and clearing the flag.
The flag is cleared after hub driver has successfully reset the device
when hcd->reset_device is called. xhci-hcd issues an internal "reset
device" command in this callback, and clear all flags once the command
completes successfully.
This command may complete with a context state error if slot was recently
reset and is already in the defauilt state. This is treated as a success
but flag was left uncleared.
The link state field is also unreliable if port is currently in reset,
so don't set the flag in active reset cases.
Also clear the flag immediately when link is no longer in ss.Inactive
state and port event handler detects a completed reset.
This issue was discovered while debugging kernel bugzilla issue 220491.
It is likely one small part of the problem, causing some of the failures,
but root cause remains unknown
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220491
Fixes: b8c3b718087b ("usb: xhci: Don't try to recover an endpoint if port is in error state.")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20251107162819.1362579-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DbC is currently only enabled back if it's in configured state during
suspend.
If system is suspended after DbC is enabled, but before the device is
properly enumerated by the host, then DbC would not be enabled back in
resume.
Always enable DbC back in resume if it's suspended in enabled,
connected, or configured state
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DbC may add 1024 bogus bytes to the beginneing of the receiving endpoint
if DbC hw triggers a STALL event before any Transfer Blocks (TRBs) for
incoming data are queued, but driver handles the event after it queued
the TRBs.
This is possible as xHCI DbC hardware may trigger spurious STALL transfer
events even if endpoint is empty. The STALL event contains a pointer
to the stalled TRB, and "remaining" untransferred data length.
As there are no TRBs queued yet the STALL event will just point to first
TRB position of the empty ring, with '0' bytes remaining untransferred.
DbC driver is polling for events, and may not handle the STALL event
before /dev/ttyDBC0 is opened and incoming data TRBs are queued.
The DbC event handler will now assume the first queued TRB (length 1024)
has stalled with '0' bytes remaining untransferred, and copies the data
This race situation can be practically mitigated by making sure the event
handler handles all pending transfer events when DbC reaches configured
state, and only then create dev/ttyDbC0, and start queueing transfers.
The event handler can this way detect the STALL events on empty rings
and discard them before any transfers are queued.
This does in practice solve the issue, but still leaves a small possible
gap for the race to trigger.
We still need a way to distinguish spurious STALLs on empty rings with '0'
bytes remaing, from actual STALL events with all bytes transmitted.
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A recent change to hide USB3 root hubs of USB2-only controllers broke
registration of USB2 root hubs - allow_single_roothub is set too late,
and by this time xhci_run() has already deferred root hub registration
until after the shared HCD is added, which will never happen.
This makes such controllers unusable, but testers didn't notice since
they were only bothered by warnings about empty USB3 root hubs. The bug
causes problems to other people who actually use such HCs and I was
able to confirm it on an ordinary HC by patching to ignore USB3 ports.
Setting allow_single_roothub during early setup fixes things.
Reported-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Closes: https://lore.kernel.org/linux-usb/CABpa4MA9unucCoKtSdzJyOLjHNVy+Cwgz5AnAxPkKw6vuox1Nw@mail.gmail.com/
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/linux-usb/lnb5bum7dnzkn3fc7gq6hwigslebo7o4ccflcvsc3lvdgnu7el@fvqpobbdoapl/
Fixes: 719de070f764 ("usb: xhci-pci: add support for hosts with zero USB3 ports")
Tested-by: Arisa Snowbell <arisa.snowbell@gmail.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the xHCI driver, port numbers are typically described using a one-based
index. However, tracing currently uses a zero-based index. To ensure
consistency between tracing and dynamic debugging, update the trace port
number to use a one-based index.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct the indentation in USB Port Register Set (PORTSC) tracing.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Address the naming and usage of the TR Dequeue Pointer mask in the xhci
driver. The Endpoint Context Field at offset 0x08 is defined as follows:
Bit 0 Dequeue Cycle State (DCS)
Bits 3:1 RsvdZ (Reserved and Zero)
Bits 63:4 TR Dequeue Pointer
When extracting the TR Dequeue Pointer for an Endpoint without Streams,
in xhci_handle_cmd_set_deq(), the inverted Dequeue Cycle State mask
(~EP_CTX_CYCLE_MASK) is used, inadvertently including the Reserved bits.
Although bits 3:1 are typically zero, using the incorrect mask could cause
issues.
The existing mask, named "SCTX_DEQ_MASK," is misleading because "SCTX"
implies exclusivity to Stream Contexts, whereas the TR Dequeue Pointer is
applicable to both Stream and non-Stream Contexts.
Rename the mask to "TR_DEQ_PTR_MASK", utilize GENMASK_ULL() macro and use
the mask when handling the TR Dequeue Pointer field.
Function xhci_get_hw_deq() returns the Endpoint Context Field 0x08, either
directly from the Endpoint context or a Stream.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add xhci support for PCI hosts that have zero USB3 ports.
Avoid creating a shared Host Controller Driver (HCD) when there is only
one root hub. Additionally, all references to 'xhci->shared_hcd' are now
checked before use.
Only xhci-pci.c requires modification to accommodate this change, as the
xhci core already supports configurations with zero USB3 ports. This
capability was introduced when xHCI Platform and MediaTek added support
for zero USB3 ports.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220181
Tested-by: Nick Nielsen <nick.kainielsen@free.fr>
Tested-by: grm1 <grm1@mailbox.org>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Retries are no longer gated by a quirk, so remove that part.
Add a brief explanation of the timeout.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 28a76fcc4c85dd39633fb96edb643c91820133e3.
No actual HW bugs are known where Endpoint Context shows Running state
but Stop Endpoint fails repeatedly with Context State Error and leaves
the endpoint state unchanged. Stop Endpoint retries on Running EPs have
been performed since early 2021 with no such issues reported so far.
Trying to handle this hypothetical case brings a more realistic danger:
if Stop Endpoint fails on an endpoint which hasn't yet started after a
doorbell ring and enough latency occurs before this completion event is
handled, the driver may time out and begin removing cancelled TDs from
a running endpoint, even though one more retry would stop it reliably.
Such high latency is rare but not impossible, and removing TDs from a
running endpoint can cause more damage than not giving back a cancelled
URB (which wasn't happening anyway). So err on the side of caution and
revert to the old policy of always retrying if the EP appears running.
[Remove stable tag as we are dealing with theoretical cases -Mathias]
Fixes: 28a76fcc4c85d ("usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running")
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250917210726.97100-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB3.2 Gen2 Host controller (a.k.a USB3HOST), IP found on the RZ/G3E
SoC is similar to R-Car XHCI, but it doesn't require any firmware.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250916150255.4231-7-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some SoCs (eg Renesas RZ/G3E SoC) have special sequence after
xhci_resume, add .post_resume_quick for it.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250916150255.4231-6-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move xhci-rcar reg definitions to a header file for the preparation of adding
support for RZ/G3E XHCI that has different register definitions.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250916150255.4231-5-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow autosuspend to be used by xhci plat device. For Qualcomm SoCs,
when in host mode, it is intended that the controller goes to suspend
state to save power and wait for interrupts from connected peripheral
to wake it up. This is particularly used in cases where a HID or Audio
device is connected. In such scenarios, the usb controller can enter
auto suspend and resume action after getting interrupts from the
connected device.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916120436.3617598-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb-next
Guan-Yu Lin <guanyulin@google.com> says:
Wesley Cheng and Mathias Nyman's USB offload design enables a
co-processor to handle some USB transfers, potentially allowing the
system to sleep (suspend-to-RAM) and save power. However, Linux's System
Sleep model halts the USB host controller when the main system isn't
managing any USB transfers. To address this, the proposal modifies the
system to recognize offloaded USB transfers and manage power
accordingly. This way, offloaded USB transfers could still happen during
system sleep (Suspend-to-RAM).
This involves two key steps:
1. Transfer Status Tracking: Propose offload_usage and corresponding
apis drivers could track USB transfers on the co-processor, ensuring
the system is aware of any ongoing activity.
2. Power Management Adjustment: Modifications to the USB driver stack
(xhci host controller driver, and USB device drivers) allow the
system to sleep (Suspend-to-RAM) without disrupting co-processor
managed USB transfers. This involves adding conditional checks to
bypass some power management operations in the System Sleep model.
Link: https://lore.kernel.org/r/20250911142051.90822-1-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sharing a USB controller with another entity via xhci-sideband driver
creates power management complexities. To prevent the USB controller
from being inadvertently deactivated while in use by the other entity, a
usage-count based mechanism is implemented. This allows the system to
manage power effectively, ensuring the controller remains available
whenever needed.
In order to maintain full functionality of an offloaded USB devices,
several changes are made within the suspend flow of such devices:
- skip usb_suspend_device() so that the port/hub are still active for
USB transfers via offloaded path.
- not suspending the endpoints which are used by USB interfaces marked
with needs_remote_wakeup. Namely, skip usb_suspend_interface() and
usb_hcd_flush_endpoint() on associated USB interfaces. This reserves a
pending interrupt urb during system suspend for handling the interrupt
transfer, which is necessary since remote wakeup doesn't apply in the
offloaded USB devices when controller is still active.
- not flushing the endpoints of actively offloaded USB devices. Given
that the USB devices is used by another entity, unilaterally flush the
endpoint might lead to unexpected behavior on another entity.
- not suspending the xhci controller. This is done by skipping the
suspend/resume callbacks in the xhci platform driver.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-5-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-5-guanyulin@google.com
|
|
The existing sideband driver only registers sidebands without tracking
their active usage. To address this, sideband will now record its active
usage when it creates/removes interrupters. In addition, a new api is
introduced to provide a means for other dirvers to fetch sideband
activity information on a USB host controller.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com
|
|
Separate dev_pm_ops for different power events such as suspend, thaw,
and hibernation. This is crucial when xhci-plat driver needs to adapt
its behavior based on different power state changes.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-2-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-2-guanyulin@google.com
|
|
When the system is suspended, USB hot-plugging/unplugging can trigger
wake events of the Tegra USB host controller.
Enable support for USB wake-up events by parsing device-tree to see if
the interrupts for the wake-up events are present and if so configure
those interrupts. Note that if wake-up events are not present, still
allow the USB host controller to probe as normal.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Link: https://lore.kernel.org/r/20250811074558.1062048-5-haotienh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Suspend-resume cycle test revealed a memory leak in 6.17-rc3
Turns out the slot_id race fix changes accidentally ends up calling
xhci_free_virt_device() with an incorrect vdev parameter.
The vdev variable was reused for temporary purposes right before calling
xhci_free_virt_device().
Fix this by passing the correct vdev parameter.
The slot_id race fix that caused this regression was targeted for stable,
so this needs to be applied there as well.
Fixes: 2eb03376151b ("usb: xhci: Fix slot_id resource race conflict")
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/linux-usb/20250829181354.4450-1-00107082@163.com
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Suggested-by: David Wang <00107082@163.com>
Cc: stable@vger.kernel.org
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pending requests will be flushed on disconnect, and the corresponding
TRBs will be turned into No-op TRBs, which are ignored by the xHC
controller once it starts processing the ring.
If the USB debug cable repeatedly disconnects before ring is started
then the ring will eventually be filled with No-op TRBs.
No new transfers can be queued when the ring is full, and driver will
print the following error message:
"xhci_hcd 0000:00:14.0: failed to queue trbs"
This is a normal case for 'in' transfers where TRBs are always enqueued
in advance, ready to take on incoming data. If no data arrives, and
device is disconnected, then ring dequeue will remain at beginning of
the ring while enqueue points to first free TRB after last cancelled
No-op TRB.
s
Solve this by reinitializing the rings when the debug cable disconnects
and DbC is leaving the configured state.
Clear the whole ring buffer and set enqueue and dequeue to the beginning
of ring, and set cycle bit to its initial state.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Decouple allocation of endpoint ring buffer from initialization
of the buffer, and initialization of endpoint context parts from
from the rest of the contexts.
It allows driver to clear up and reinitialize endpoint rings
after disconnect without reallocating everything.
This is a prerequisite for the next patch that prevents the transfer
ring from filling up with cancelled (no-op) TRBs if a debug cable is
reconnected several times without transferring anything.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sakari Ailus <sakari.ailus@linux.intel.com> says:
This series enables support for eUSB2 Double Isochronous IN Bandwidth UVC
devices specified in 'USB 2.0 Double Isochronous IN Bandwidth' ECN. In
short, it adds support for new integrated USB2 webcams that can send twice
the data compared to conventional USB2 webcams.
These devices are identified by the device descriptor bcdUSB 0x0220 value.
They have an additional eUSB2 Isochronous Endpoint Companion Descriptor,
and a zero max packet size in regular isoc endpoint descriptor. Support
for parsing that new descriptor was added in commit
c749f058b437 ("USB: core: Add eUSB2 descriptor and parsing in USB core")
This series adds support to UVC, USB core, and xHCI to identify eUSB2
double isoc devices, and allow and set proper max packet, iso frame desc
sizes, bytes per interval, and other values in URBs and xHCI endpoint
contexts needed to support the double data rates for eUSB2 double isoc
devices.
since v4:
https://lore.kernel.org/linux-usb/20250812132445.3185026-1-sakari.ailus@linux.intel.com
- New patch: use le16_to_cpu() to access endpoint descriptor's
wMaxPacketSize field, which is an __le16. This isn't a bugfix as the
value was compared to 0.
- New patch: add USB device speed check for eUSB2 isochronous endpoint
companion parsing. The check is then removed from sites checking the
existence of the companion (through companion's bDescriptorType field,
which is non-zero for valid descriptors).
- New patch: do not parse eUSB2 isoc double BW companion descriptor on
interrupt or OUT endpoints. It is not supposed to be found there,
according to the ECN.
- Rename usb_endpoint_max_isoc_bpi() as
usb_endpoint_max_periodic_payload() and move it right after
usb_maxpacket().
- Fixed @ep reference in kernel-doc documentation for
usb_endpoint_max_periodic_payload().
- In usb_endpoint_max_periodic_payload(), call struct usb_device pointer
argument "udev" instead of "dev", to align with naming elsewhere.
- Add support for interrupt endpoints in
usb_endpoint_max_periodic_payload(); eUSB2 double isoc BW is still
limited to isochronous endpoints though.
- In usb_endpoint_max_periodic_payload(), remove the separate case for
USB_SPEED_HIGH as the check is already done in parsing the eUSB isoc
double BW companion, which is checked for.
- New patch: use usb_endpoint_max_periodic_payload() in xHCI driver,
replacing xhci_get_max_esit_payload().
- Check non-zero bDescriptorType field of ep->eusb2_isoc_ep_comp instead
of dwBytesPerInterval value exceeding 3072, where
xhci_eusb2_is_isoc_bw_double() was used. This aligns the checks of eUSB2
isochronous double bandwidth support for an endpoint.
- New patch: introduce usb_endpoint_is_hs_isoc_double() to figure out
whether an endpoint uses isochronous double bandwidth and use the
function in the xHCI driver and the usb core.
xhci_eusb2_is_isoc_bw_double() is dropped, as well as the
MAX_ISOC_XFER_SIZE_HS macro. usb_endpoint_is_hs_isoc_double() also
includes check for bcdUSB == 0x220, to anticipate adding support for
eUSB2V2.
- Merge condition for checking eUSB2 isoc double bw support for
xHCI/endpoint in xhci_get_endpoint_mult().
- Improve comment regarding maximum packet size bits 12:11 in
xhci_get_endpoint_max_burst().
- Aligned subject prefixes with the recent patches to the same files.
since v3:
https://lore.kernel.org/linux-usb/20250807055355.1257029-1-sakari.ailus@linux.intel.com/
- Use spaces in aligning macro body for HCC2_EUSB2_DIC() (1st patch).
- Move usb_endpoint_max_isoc_bpi() to drivers/usb/core/usb.c (3rd patch).
since v2:
https://lore.kernel.org/linux-usb/20250711083413.1552423-1-sakari.ailus@linux.intel.com
- Use ep->eusb2_isoc_ep_comp.bDescriptorType to determined whether the
eUSB2 isochronous endpoint companion descriptor exists.
- Clean up eUSB2 double isoc bw maxp calculation.
- Drop le16_to_cpu(udev->descriptor.bcdUSB) == 0x220 check from
xhci_eusb2_is_isoc_bw_double() -- it's redundant as
ep->eusb2_isoc_ep_comp.dwBytesPerInterval will be zero otherwise.
- Add kernel-doc documentation for usb_endpoint_max_isoc_bpi().
- Check the endpoint has IN direction in usb_endpoint_max_isoc_bpi() and
usb_submit_urb() as a condition for eUSB2 isoc double bw.
since v1:
https://lore.kernel.org/linux-usb/20250616093730.2569328-2-mathias.nyman@linux.intel.com
- Introduce uvc_endpoint_max_isoc_bpi() to obtain maximum bytes per
interval value for an endpoint, in a new patch (3rd). This code has been
slightly reworked from the instance in the UVC driver, including support
for SuperSpeedPlus Isochronous Endpoint Companion.
- Use usb_endpoint_max_isoc_bpi() in the UVC driver instead of open-coding
eUSB2 support there, also drop now-redundant uvc_endpoint_max_bpi().
- Use u32 for maximum bpi and related information in the UVC driver -- the
value could be larger than a 16-bit type can hold.
- Assume max in usb_submit_urb() is a natural number as
usb_endpoint_maxp() returns only natural numbers (2nd patch).
Link: https://lore.kernel.org/r/20250820143824.551777-1-sakari.ailus@linux.intel.com
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Detect eUSB2 double isoc bw capable hosts and devices, and set the proper
xhci endpoint context values such as 'Mult', 'Max Burst Size', and 'Max
ESIT Payload' to enable the double isochronous bandwidth endpoints.
Intel xHC uses the endpoint context 'Mult' field for eUSB2 isoc
endpoints even if hosts supporting Large ESIT Payload Capability should
normally ignore the mult field.
Signed-off-by: Rai, Amardeep <amardeep.rai@intel.com>
Co-developed-by: Kannappan R <r.kannappan@intel.com>
Signed-off-by: Kannappan R <r.kannappan@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Co-developed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-8-sakari.ailus@linux.intel.com
|
|
Use the newly added usb_endpoint_max_periodic_payload() to obtain the
maximum number of bytes to transfer during a service interval for
isochronous and interrupt endpoints. This will replace the xhci-specific
xhci_get_max_esit_payload() which is removed as redundant.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-6-sakari.ailus@linux.intel.com
|
|
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://lore.kernel.org/r/20250902132720.85504-1-liaoyuanhong@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Samsung S3C24xx family of SoCs was removed the Linux kernel in the
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of remaining S3C24xx compatibles.
The driver (named s3c2410) is still being used via platform code for
S3C64xx platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250831122222.50332-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Partially revert commit e1db856bd288 ("usb: xhci: remove '0' write to
write-1-to-clear register") because the patch cleared the Interrupt Pending
bit during interrupt enabling and disabling. The Interrupt Pending bit
should only be cleared when the driver has handled the interrupt.
Ideally, all interrupts should be handled before disabling the interrupt;
consequently, no interrupt should be pending when enabling the interrupt.
For this reason, keep the debug message informing if an interrupt is still
pending when an interrupt is disabled.
Because the Interrupt Pending bit is write-1-to-clear, writing '0' to it
ensures that the state does not change.
Link: https://lore.kernel.org/linux-usb/20250818231103.672ec7ed@foxbook
Fixes: e1db856bd288 ("usb: xhci: remove '0' write to write-1-to-clear register")
Closes: https://bbs.archlinux.org/viewtopic.php?id=307641
cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250819125844.2042452-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xHC controller may immediately reuse a slot_id after it's disabled,
giving it to a new enumerating device before the xhci driver freed
all resources related to the disabled device.
In such a scenario, device-A with slot_id equal to 1 is disconnecting
while device-B is enumerating, device-B will fail to enumerate in the
follow sequence.
1.[device-A] send disable slot command
2.[device-B] send enable slot command
3.[device-A] disable slot command completed and wakeup waiting thread
4.[device-B] enable slot command completed with slot_id equal to 1 and
wakeup waiting thread
5.[device-B] driver checks that slot_id is still in use (by device-A) in
xhci_alloc_virt_device, and fail to enumerate due to this
conflict
6.[device-A] xhci->devs[slot_id] set to NULL in xhci_free_virt_device
To fix driver's slot_id resources conflict, clear xhci->devs[slot_id] and
xhci->dcbba->dev_context_ptrs[slot_id] pointers in the interrupt context
when disable slot command completes successfully. Simultaneously, adjust
function xhci_free_virt_device to accurately handle device release.
[minor smatch warning and commit message fix -Mathias]
Cc: stable@vger.kernel.org
Fixes: 7faac1953ed1 ("xhci: avoid race between disable slot command and host runtime suspend")
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250819125844.2042452-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Increase the External ROM access timeouts to prevent failures during
programming of External SPI EEPROM chips. The current timeouts are
too short for some SPI EEPROMs used with uPD720201 controllers.
The current timeout for Chip Erase in renesas_rom_erase() is 100 ms ,
the current timeout for Sector Erase issued by the controller before
Page Program in renesas_fw_download_image() is also 100 ms. Neither
timeout is sufficient for e.g. the Macronix MX25L5121E or MX25V5126F.
MX25L5121E reference manual [1] page 35 section "ERASE AND PROGRAMMING
PERFORMANCE" and page 23 section "Table 8. AC CHARACTERISTICS (Temperature
= 0°C to 70°C for Commercial grade, VCC = 2.7V ~ 3.6V)" row "tCE" indicate
that the maximum time required for Chip Erase opcode to complete is 2 s,
and for Sector Erase it is 300 ms .
MX25V5126F reference manual [2] page 47 section "13. ERASE AND PROGRAMMING
PERFORMANCE (2.3V - 3.6V)" and page 42 section "Table 8. AC CHARACTERISTICS
(Temperature = -40°C to 85°C for Industrial grade, VCC = 2.3V - 3.6V)" row
"tCE" indicate that the maximum time required for Chip Erase opcode to
complete is 3.2 s, and for Sector Erase it is 400 ms .
Update the timeouts such, that Chip Erase timeout is set to 5 seconds,
and Sector Erase timeout is set to 500 ms. Such lengthy timeouts ought
to be sufficient for majority of SPI EEPROM chips.
[1] https://www.macronix.com/Lists/Datasheet/Attachments/8634/MX25L5121E,%203V,%20512Kb,%20v1.3.pdf
[2] https://www.macronix.com/Lists/Datasheet/Attachments/8750/MX25V5126F,%202.5V,%20512Kb,%20v1.1.pdf
Fixes: 2478be82de44 ("usb: renesas-xhci: Add ROM loader for uPD720201")
Cc: stable <stable@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250802225526.25431-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kthread_run() function returns error pointers so the
max3421_hcd->spi_thread pointer can be either error pointers or NULL.
Check for both before dereferencing it.
Fixes: 05dfa5c9bc37 ("usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJTMVAPtRe5H6jug@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When encounters some errors like these:
xhci_hcd 0000:4a:00.2: xHCI dying or halted, can't queue_command
xhci_hcd 0000:4a:00.2: FIXME: allocate a command ring segment
usb usb5-port6: couldn't allocate usb_device
It's hard to know whether xhc_state is dying or halted. So it's better
to print xhc_state's value which can help locate the resaon of the bug.
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20250725060117.1773770-1-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a subtle contradiction between sections of the xHCI 1.2 spec
regarding the initialization of Input Endpoint Context fields. Section
4.8.2 ("Endpoint Context Initialization") states that all fields should
be initialized to 0. However, Section 6.2.3 ("Endpoint Context", p.453)
specifies that the Average TRB Length (avg_trb_len) field shall be
greater than 0, and explicitly notes (p.454): "Software shall set
Average TRB Length to '8' for control endpoints."
Strictly setting all fields to 0 during initialization conflicts with
the specific recommendation for control endpoints. In practice, setting
avg_trb_len = 0 is not meaningful for the hardware/firmware, as the
value is used for bandwidth calculation.
Motivation: Our company is developing a custom Virtual xHC hardware
platform that strictly follows the xHCI spec and its recommendations.
During validation, we observed that enumeration fails and a parameter
error (TRB Completion Code = 5) is reported if avg_trb_len for EP0 is
not set to 8 as recommended by Section 6.2.3. This demonstrates the
importance of assigning a meaningful, non-zero value to avg_trb_len,
even in virtualized or emulated environments.
This patch explicitly sets avg_trb_len to 8 for EP0 in
xhci_setup_addressable_virt_dev(), as recommended in Section 6.2.3, to
prevent potential issues with xHCI host controllers that enforce the
spec strictly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220033
Signed-off-by: Jay Chen <shawn2000100@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250717073107.488599-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a USB4 dock is unplugged from a system it won't respond to ring
events. The PCI core handles the surprise removal event and notifies
all PCI drivers. The XHCI PCI driver sets a flag that the device is
being removed, and when the device stops responding a flag is also
added to indicate it's dying.
When that flag is set don't bother to show warnings about a missing
controller.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250717073107.488599-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a USB4 dock is unplugged from a system it won't respond to ring
events. The PCI core handles the surprise removal event and notifies
all PCI drivers. The XHCI PCI driver sets a flag that the device is
being removed as well.
When that flag is set don't show messages in the cleanup path for
marking the controller dead.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250717073107.488599-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well to build on top of for other
changes that depend on them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Flush dbc requests when dbc is stopped and transfer rings are freed.
Failure to flush them lead to leaking memory and dbc completing odd
requests after resuming from suspend, leading to error messages such as:
[ 95.344392] xhci_hcd 0000:00:0d.0: no matched request
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250627144127.3889714-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When /dev/ttyDBC0 device is created then by default ECHO flag
is set for the terminal device. However if data arrives from
a peer before application using /dev/ttyDBC0 applies its set
of terminal flags then the arriving data will be echoed which
might not be desired behavior.
Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.")
Cc: stable <stable@kernel.org>
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/stable/20250610111802.18742-1-ukaszb%40chromium.org
Link: https://lore.kernel.org/r/20250627144127.3889714-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Disable stream for platform xHC controller with broken stream.
Fixes: 14aec589327a6 ("storage: accept some UAS devices if streams are unavailable")
Cc: stable <stable@kernel.org>
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250627144127.3889714-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During the High-Speed Isochronous Audio transfers, xHCI
controller on certain AMD platforms experiences momentary data
loss. This results in Missed Service Errors (MSE) being
generated by the xHCI.
The root cause of the MSE is attributed to the ISOC OUT endpoint
being omitted from scheduling. This can happen when an IN
endpoint with a 64ms service interval either is pre-scheduled
prior to the ISOC OUT endpoint or the interval of the ISOC OUT
endpoint is shorter than that of the IN endpoint. Consequently,
the OUT service is neglected when an IN endpoint with a service
interval exceeding 32ms is scheduled concurrently (every 64ms in
this scenario).
This issue is particularly seen on certain older AMD platforms.
To mitigate this problem, it is recommended to adjust the service
interval of the IN endpoint to not exceed 32ms (interval 8). This
adjustment ensures that the OUT endpoint will not be bypassed,
even if a smaller interval value is utilized.
Cc: stable <stable@kernel.org>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250627144127.3889714-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Per Documentation/filesystems/sysfs.rst, show() methods should only
use sysfs_emit() or sysfs_emit_at() when formatting values to be
returned to userspace.
Convert the uses of scnprintf() in sysfs show() methods to
sysfs_emit() and sysfs_emit_at() for better safety and consistency.
Signed-off-by: Hendrik Hamerlinck <hendrik.hamerlinck@hammernet.be>
Link: https://lore.kernel.org/r/20250623140950.61568-1-hendrik.hamerlinck@hammernet.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
