summaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci.c
AgeCommit message (Collapse)AuthorFilesLines
2019-12-17xhci: Increase STS_HALT timeout in xhci_suspend()Kai-Heng Feng1-1/+1
commit 7c67cf6658cec70d8a43229f2ce74ca1443dc95e upstream. I've recently observed failed xHCI suspend attempt on AMD Raven Ridge system: kernel: xhci_hcd 0000:04:00.4: WARN: xHC CMD_RUN timeout kernel: PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 kernel: PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 kernel: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110 kernel: PM: Device 0000:04:00.4 failed to suspend async: error -110 Similar to commit ac343366846a ("xhci: Increase STS_SAVE timeout in xhci_suspend()") we also need to increase the HALT timeout to make it be able to suspend again. Cc: <stable@vger.kernel.org> # 5.2+ Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: xhci: only set D3hot for pci deviceHenry Lin1-5/+2
commit f2c710f7dca8457e88b4ac9de2060f011254f9dd upstream. Xhci driver cannot call pci_set_power_state() on non-pci xhci host controllers. For example, NVIDIA Tegra XHCI host controller which acts as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform hits this issue during shutdown. Cc: <stable@vger.kernel.org> Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17xhci: Increase STS_SAVE timeout in xhci_suspend()Kai-Heng Feng1-1/+1
commit ac343366846a445bb81f0a0e8f16abb8bd5d5d88 upstream. After commit f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()"), ASMedia xHCI may fail to suspend. Although the algorithms are essentially the same, the old max timeout is (usec + usec * time of doing readl()), and the new max timeout is just usec, which is much less than the old one. Increase the timeout to make ASMedia xHCI able to suspend again. BugLink: https://bugs.launchpad.net/bugs/1844021 Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-8-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17usb: xhci: wait for CNR controller not ready bit in xhci resumeRick Tseng1-0/+12
commit a70bcbc322837eda1ab5994d12db941dc9733a7d upstream. NVIDIA 3.1 xHCI card would lose power when moving power state into D3Cold. Thus we need to wait for CNR bit to clear in xhci resume, just as in xhci init. [Minor changes to comment and commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Rick Tseng <rtseng@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-6-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17xhci: Check all endpoints for LPM timeoutJan Schmidt1-4/+4
commit d500c63f80f2ea08ee300e57da5f2af1c13875f5 upstream. If an endpoint is encountered that returns USB3_LPM_DEVICE_INITIATED, keep checking further endpoints, as there might be periodic endpoints later that return USB3_LPM_DISABLED due to shorter service intervals. Without this, the code can set too high a maximum-exit-latency and prevent the use of multiple USB3 cameras that should be able to work. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Schmidt <jan@centricular.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-4-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-17xhci: Prevent device initiated U1/U2 link pm if exit latency is too longMathias Nyman1-4/+6
commit cd9d9491e835a845c1a98b8471f88d26285e0bb9 upstream. If host/hub initiated link pm is prevented by a driver flag we still must ensure that periodic endpoints have longer service intervals than link pm exit latency before allowing device initiated link pm. Fix this by continue walking and checking endpoint service interval if xhci_get_timeout_no_hub_lpm() returns anything else than USB3_LPM_DISABLED While at it fix the split line error message Tested-by: Jan Schmidt <jan@centricular.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-3-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-09usb: xhci: avoid null pointer deref when bos field is NULLCarsten Schmid1-1/+1
commit 7aa1bb2ffd84d6b9b5f546b079bb15cd0ab6e76e upstream. With defective USB sticks we see the following error happen: usb 1-3: new high-speed USB device number 6 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: device descriptor read/64, error -71 usb 1-3: new high-speed USB device number 7 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: unable to get BOS descriptor set usb 1-3: New USB device found, idVendor=0781, idProduct=5581 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 ... BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 This comes from the following place: [ 1660.215380] IP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.222092] PGD 0 P4D 0 [ 1660.224918] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 1660.425520] CPU: 1 PID: 38 Comm: kworker/1:1 Tainted: P U W O 4.14.67-apl #1 [ 1660.434277] Workqueue: usb_hub_wq hub_event [usbcore] [ 1660.439918] task: ffffa295b6ae4c80 task.stack: ffffad4580150000 [ 1660.446532] RIP: 0010:xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.453821] RSP: 0018:ffffad4580153c70 EFLAGS: 00010046 [ 1660.459655] RAX: 0000000000000000 RBX: ffffa295b4d7c000 RCX: 0000000000000002 [ 1660.467625] RDX: 0000000000000002 RSI: ffffffff984a55b2 RDI: ffffffff984a55b2 [ 1660.475586] RBP: ffffad4580153cc8 R08: 0000000000d6520a R09: 0000000000000001 [ 1660.483556] R10: ffffad4580a004a0 R11: 0000000000000286 R12: ffffa295b4d7c000 [ 1660.491525] R13: 0000000000010648 R14: ffffa295a84e1800 R15: 0000000000000000 [ 1660.499494] FS: 0000000000000000(0000) GS:ffffa295bfc80000(0000) knlGS:0000000000000000 [ 1660.508530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1660.514947] CR2: 0000000000000008 CR3: 000000025a114000 CR4: 00000000003406a0 [ 1660.522917] Call Trace: [ 1660.525657] usb_set_usb2_hardware_lpm+0x3d/0x70 [usbcore] [ 1660.531792] usb_disable_device+0x242/0x260 [usbcore] [ 1660.537439] usb_disconnect+0xc1/0x2b0 [usbcore] [ 1660.542600] hub_event+0x596/0x18f0 [usbcore] [ 1660.547467] ? trace_preempt_on+0xdf/0x100 [ 1660.552040] ? process_one_work+0x1c1/0x410 [ 1660.556708] process_one_work+0x1d2/0x410 [ 1660.561184] ? preempt_count_add.part.3+0x21/0x60 [ 1660.566436] worker_thread+0x2d/0x3f0 [ 1660.570522] kthread+0x122/0x140 [ 1660.574123] ? process_one_work+0x410/0x410 [ 1660.578792] ? kthread_create_on_node+0x60/0x60 [ 1660.583849] ret_from_fork+0x3a/0x50 [ 1660.587839] Code: 00 49 89 c3 49 8b 84 24 50 16 00 00 8d 4a ff 48 8d 04 c8 48 89 ca 4c 8b 10 45 8b 6a 04 48 8b 00 48 89 45 c0 49 8b 86 80 03 00 00 <48> 8b 40 08 8b 40 03 0f 1f 44 00 00 45 85 ff 0f 84 81 01 00 00 [ 1660.608980] RIP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] RSP: ffffad4580153c70 [ 1660.617921] CR2: 0000000000000008 Tracking this down shows that udev->bos is NULL in the following code: (xhci.c, in xhci_set_usb2_hardware_lpm) field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); <<<<<<< here xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num + 1); if (enable) { /* Host supports BESL timeout instead of HIRD */ if (udev->usb2_hw_lpm_besl_capable) { /* if device doesn't have a preferred BESL value use a * default one which works with mixed HIRD and BESL * systems. See XHCI_DEFAULT_BESL definition in xhci.h */ if ((field & USB_BESL_SUPPORT) && (field & USB_BESL_BASELINE_VALID)) hird = USB_GET_BESL_BASELINE(field); else hird = udev->l1_params.besl; The failing case is when disabling LPM. So it is sufficient to avoid access to udev->bos by moving the instruction into the "enable" clause. Cc: Stable <stable@vger.kernel.org> Signed-off-by: Carsten Schmid <carsten_schmid@mentor.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-09xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()Andrey Smirnov1-12/+10
commit f7fac17ca925faa03fc5eb854c081a24075f8bad upstream. Xhci_handshake() implements the algorithm already captured by readl_poll_timeout_atomic(). Convert the former to use the latter to avoid repetition. Turned out this patch also fixes a bug on the AMD Stoneyridge platform where usleep(1) sometimes takes over 10ms. This means a 5 second timeout can easily take over 15 seconds which will trigger the watchdog and reboot the system. [Add info about patch fixing a bug to commit message -Mathias] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Raul E Rangel <rrangel@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31xhci: Fix leaking USB3 shared_hcd at xhci removalMathias Nyman1-2/+0
commit f068090426ea8d72c408ebd42953a82a88e2282c upstream. Ensure that the shared_hcd pointer is valid when calling usb_put_hcd() The shared_hcd is removed and freed in xhci by first calling usb_remove_hcd(xhci->shared_hcd), and later usb_put_hcd(xhci->shared_hcd) Afer commit fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") the shared_hcd was never properly put as xhci->shared_hcd was set to NULL before usb_put_hcd(xhci->shared_hcd) was called. shared_hcd (USB3) is removed before primary hcd (USB2). While removing the primary hcd we might need to handle xhci interrupts to cleanly remove last USB2 devices, therefore we need to set xhci->shared_hcd to NULL before removing the primary hcd to let xhci interrupt handler know shared_hcd is no longer available. xhci-plat.c, xhci-histb.c and xhci-mtk first create both their hcd's before adding them. so to keep the correct reverse removal order use a temporary shared_hcd variable for them. For more details see commit 4ac53087d6d4 ("usb: xhci: plat: Create both HCDs before adding them") Fixes: fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") Cc: Joel Stanley <joel@jms.id.au> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: <stable@vger.kernel.org> Reported-by: Jack Pham <jackp@codeaurora.org> Tested-by: Jack Pham <jackp@codeaurora.org> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13xhci: Prevent U1/U2 link pm states if exit latency is too longMathias Nyman1-0/+16
commit 0472bf06c6fd33c1a18aaead4c8f91e5a03d8d7b upstream. Don't allow USB3 U1 or U2 if the latency to wake up from the U-state reaches the service interval for a periodic endpoint. This is according to xhci 1.1 specification section 4.23.5.2 extra note: "Software shall ensure that a device is prevented from entering a U-state where its worst case exit latency approaches the ESIT." Allowing too long exit latencies for periodic endpoint confuses xHC internal scheduling, and new devices may fail to enumerate with a "Not enough bandwidth for new device state" error from the host. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13xhci: workaround CSS timeout on AMD SNPS 3.0 xHCSandeep Singh1-4/+22
commit a7d57abcc8a5bdeb53bbf8e87558e8e0a2c2a29d upstream. Occasionally AMD SNPS 3.0 xHC does not respond to CSS when set, also it does not flag anything on SRE and HCE to point the internal xHC errors on USBSTS register. This stalls the entire system wide suspend and there is no point in stalling just because of xHC CSS is not responding. To work around this problem, if the xHC does not flag anything on SRE and HCE, we can skip the CSS timeout and allow the system to continue the suspend. Once the system resume happens we can internally reset the controller using XHCI_RESET_ON_RESUME quirk Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com> cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> Cc: <stable@vger.kernel.org> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01xhci: Allow more than 32 quirksMarc Zyngier1-3/+3
commit 36b6857932f380fcb55c31ac75857e3e81dd583a upstream. We now have 32 different quirks, and the field that holds them is full. Let's bump it up to the next stage so that we can handle some more... The type is now an unsigned long long, which is 64bit on most architectures. We take this opportunity to change the quirks from using (1 << x) to BIT_ULL(x). Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Faiz Abbas <faiz_abbas@ti.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: "Cherian, George" <George.Cherian@cavium.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26xhci: Fix use after free for URB cancellation on a reallocated endpointMathias Nyman1-0/+30
commit 4937213ba7fafa13f30496b3965ffe93970d8b53 upstream. Make sure the cancelled URB is on the current endpoint ring. If the endpoint ring has been reallocated since the URB was enqueued then the URB may contain TD and TRB pointers to a already freed ring. In this the case return the URB without touching any of the freed ring structure data. Don't try to stop the ring. It would be useless. This can occur if endpoint is not flushed before it is dropped and re-added, which is the case in usb_set_interface() as xhci does things in an odd order. Cc: <stable@vger.kernel.org> Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24usb: xhci: increase CRS timeout valueAjay Gupta1-1/+6
[ Upstream commit 305886ca87be480ae159908c2affd135c04215cf ] Some controllers take almost 55ms to complete controller restore state (CRS). There is no timeout limit mentioned in xhci specification so fixing the issue by increasing the timeout limit to 100ms [reformat code comment -Mathias] Signed-off-by: Ajay Gupta <ajaykuee@gmail.com> Signed-off-by: Nagaraj Annaiah <naga.annaiah@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25xhci: Fix perceived dead host due to runtime suspend race with event handlerMathias Nyman1-3/+37
commit 229bc19fd7aca4f37964af06e3583c1c8f36b5d6 upstream. Don't rely on event interrupt (EINT) bit alone to detect pending port change in resume. If no change event is detected the host may be suspended again, oterwise roothubs are resumed. There is a lag in xHC setting EINT. If we don't notice the pending change in resume, and the controller is runtime suspeded again, it causes the event handler to assume host is dead as it will fail to read xHC registers once PCI puts the controller to D3 state. [ 268.520969] xhci_hcd: xhci_resume: starting port polling. [ 268.520985] xhci_hcd: xhci_hub_status_data: stopping port polling. [ 268.521030] xhci_hcd: xhci_suspend: stopping port polling. [ 268.521040] xhci_hcd: // Setting command ring address to 0x349bd001 [ 268.521139] xhci_hcd: Port Status Change Event for port 3 [ 268.521149] xhci_hcd: resume root hub [ 268.521163] xhci_hcd: port resume event for port 3 [ 268.521168] xhci_hcd: xHC is not running. [ 268.521174] xhci_hcd: handle_port_status: starting port polling. [ 268.596322] xhci_hcd: xhci_hc_died: xHCI host controller not responding, assume dead The EINT lag is described in a additional note in xhci specs 4.19.2: "Due to internal xHC scheduling and system delays, there will be a lag between a change bit being set and the Port Status Change Event that it generated being written to the Event Ring. If SW reads the PORTSC and sees a change bit set, there is no guarantee that the corresponding Port Status Change Event has already been written into the Event Ring." Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03xhci: Fix use-after-free in xhci_free_virt_deviceMathias Nyman1-0/+1
commit 44a182b9d17765514fa2b1cc911e4e65134eef93 upstream. KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e where xhci_free_virt_device() sets slot id to 0 if udev exists: if (dev->udev && dev->udev->slot_id) dev->udev->slot_id = 0; dev->udev will be true even if udev is freed because dev->udev is not set to NULL. set dev->udev pointer to NULL in xhci_free_dev() The original patch went to stable so this fix needs to be applied there as well. Fixes: a400efe455f7 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot") Cc: <stable@vger.kernel.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-25xhci: Show what USB release number the xHC supports from protocol capablityMathias Nyman1-3/+11
[ Upstream commit 0ee78c101425aae681c631ba59c6ac7f44b1d83a ] xhci driver displays the supported xHC USB revision in a message during driver load: "Host supports USB 3.1 Enhanced SuperSpeed" Get the USB minor revision number from the xhci protocol capability. This will show the correct supported revisions for new USB 3.2 and later hosts Don't rely on the SBRN (serial bus revision number) register, it's often showing 0x30 (USB3.0) for hosts that support USB 3.1 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-28usb: xhci: Fix potential memory leak in xhci_disable_slot()Lu Baolu1-21/+9
commit cd3f1790b006d91786728c20a01da21ee277aff1 upstream. xhci_disable_slot() allows the invoker to pass a command pointer as paramenter. Otherwise, it will allocate one. This will cause memory leak when a command structure was allocated inside of this function while queuing command trb fails. Another problem comes up when the invoker passed a command pointer, but xhci_disable_slot() frees it when it detects a dead host. This patch fixes these two problems by removing the command parameter from xhci_disable_slot(). Fixes: f9e609b82479 ("usb: xhci: Add helper function xhci_disable_slot().") Cc: Guoqing Zhang <guoqing.zhang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-28usb: xhci: Disable slot even when virt-dev is nullLu Baolu1-4/+0
commit b64149ca016c25f30b39ac5a8f37cfb9017e19bb upstream. xhci_disable_slot() is a helper for disabling a slot when a device goes away or recovers from error situations. Currently, it checks the corespoding virt-dev pointer and returns directly (w/o issuing disable slot command) if it's null. This is unnecessary and will cause problems in case where virt-dev allocation fails and xhci_disable_slot() is called to roll back the hardware state. Refer to the implementation of xhci_alloc_dev(). This patch removes lines to check virt-dev in xhci_disable_slot(). Fixes: f9e609b82479 ("usb: xhci: Add helper function xhci_disable_slot().") Cc: Guoqing Zhang <guoqing.zhang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19xhci: Fix front USB ports on ASUS PRIME B350M-AKai-Heng Feng1-0/+3
commit 191edc5e2e515aab1075a3f0ef23599e80be5f59 upstream. When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the xHC stops working: [ 549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout [ 549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110 [ 549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110) Delay before running xHC command CMD_RUN can workaround the issue. Use a new quirk to make the delay only targets to the affected xHC. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-10usb: xhci: Return error when host is dead in xhci_disable_slot()Lu Baolu1-2/+1
[ Upstream commit dcabc76fa9361186e6b88c30a68db8fa9d5b4a1c ] xhci_disable_slot() is a helper for disabling a slot when a device goes away or recovers from error situations. Currently, it returns success when it sees a dead host. This is not the right way to go. It should return error and let the invoker know that disable slot command was failed due to a dead host. Fixes: f9e609b82479 ("usb: xhci: Add helper function xhci_disable_slot().") Cc: Guoqing Zhang <guoqing.zhang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17xhci: Identify USB 3.1 capable hosts by their port protocol capabilityMathias Nyman1-1/+2
Many USB 3.1 capable hosts never updated the Serial Bus Release Number (SBRN) register to USB 3.1 from USB 3.0 xhci driver identified USB 3.1 capable hosts based on this SBRN register, which according to specs "contains the release of the Universal Serial Bus Specification with which this Universal Serial Bus Host Controller module is compliant." but still in october 2017 gives USB 3.0 as the only possible option. Make an additional check for USB 3.1 support and enable it if the xHCI supported protocol capablity lists USB 3.1 capable ports. Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18usb: xhci: Free the right ring in xhci_add_endpoint()Lu Baolu1-1/+2
In the xhci_add_endpoint(), a new ring was allocated and saved at xhci_virt_ep->new_ring. Hence, when error happens, we need to free the allocated ring before returning error. Current code frees xhci_virt_ep->ring instead of the new_ring. This patch fixes this. Cc: <stable@vger.kernel.org> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20xhci: fix memleak in xhci_run()Shu Wang1-1/+3
Found this issue by kmemleak. xhci_run() did not check return val and free command for xhci_queue_vendor_command() unreferenced object 0xffff88011c0be500 (size 64): comm "kworker/0:1", pid 58, jiffies 4294670908 (age 50.420s) hex dump (first 32 bytes): backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8121801a>] kmem_cache_alloc_trace+0xca/0x1d0 [<ffffffff81576bf4>] xhci_alloc_command+0x44/0x130 [<ffffffff8156f1cc>] xhci_run+0x4cc/0x630 [<ffffffff8153b84b>] usb_add_hcd+0x3bb/0x950 [<ffffffff8154eac8>] usb_hcd_pci_probe+0x188/0x500 [<ffffffff815851ac>] xhci_pci_probe+0x2c/0x220 [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff810a54e4>] work_for_cpu_fn+0x14/0x20 [<ffffffff810a8409>] process_one_work+0x149/0x360 [<ffffffff810a8d08>] worker_thread+0x1d8/0x3c0 [<ffffffff810ae7d9>] kthread+0x109/0x140 [<ffffffff8176d585>] ret_from_fork+0x25/0x30 [<ffffffffffffffff>] 0xffffffffffffffff Cc: <stable@vger.kernel.org> Signed-off-by: Shu Wang <shuwang@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20xhci: Bad Ethernet performance plugged in ASM1042A hostJiahau Chang1-0/+6
When USB Ethernet is plugged in ASMEDIA ASM1042A xHCI host, bad performance was manifesting in Web browser use (like download large file such as ISO image). It is known limitation of ASM1042A that is not compatible with driver scheduling, As a workaround we can modify flow control handling of ASM1042A. The register we modify is changes the behavior [use quirk bit 28, usleep_range 40-60us, empty non-pci function -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Jiahau Chang <Lars_chang@asmedia.com.tw> Signed-off-by: Ian Pilcher <arequipeno@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15xhci: cleanup virtual endoint structure, remove stopped_streamMathias Nyman1-3/+3
Get rid of stopped_stream member in virtual endpoint structure as it is only used in one case when cleaning a halted endpoint. Pass it as function parameter instead. No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15xhci: remove endpoint ring cacheMathias Nyman1-9/+8
Anurag Kumar Vulisha reported several issues with xhci endpoint ring caching. 31 Rings are cached per device before a ring is freed. These cached rings are not used as default if a new ring is needed. They are only used if the driver fails to allocate memory for a ring. The current ring cache is more a reason to why we run out memory than a help when we actually do so. Anurag Kumar Vulisha tried to use cached rings as a first option and found new issues with cached ring initialization. Cached rings were first zeroed and then manually reinitialized with link trbs etc, but forgetting to set some important bits like cycle toggle bit. Remove the ring cache completely as it's a faulty premature optimization eating memory Reported-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Tested-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03xhci: Add stream id to xhci_dequeue_state structureMathias Nyman1-1/+1
The values for the new dequeue segment, new dequeue pointer and new cycle state are needed for manually moving the xHC ring dequeue pointer. These are conveniently stored in a xhci_dequeue_state structure. stream support was added later and stream_id was carried as a function parameter. Move the stream_id to the xhci_dequeue_state structure instead. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18xhci: Fix command ring stop regression in 4.11Mathias Nyman1-4/+4
In 4.11 TRB completion codes were renamed to match spec. Completion codes for command ring stopped and endpoint stopped were mixed, leading to failures while handling a stopped command ring. Use the correct completion code for command ring stopped events. Fixes: 0b7c105a04ca ("usb: host: xhci: rename completion codes to match spec") Cc: <stable@vger.kernel.org> # 4.11 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcdPeter Chen1-2/+3
According to xHCI spec Figure 30: Interrupt Throttle Flow Diagram If PCI Message Signaled Interrupts (MSI or MSI-X) are enabled, then the assertion of the Interrupt Pending (IP) flag in Figure 30 generates a PCI Dword write. The IP flag is automatically cleared by the completion of the PCI write. the MSI enabled HCs don't need to clear interrupt pending bit, but hcd->irq = 0 doesn't equal to MSI enabled HCD. At some Dual-role controller software designs, it sets hcd->irq as 0 to avoid HCD requesting interrupt, and they want to decide when to call usb_hcd_irq by software. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-19xhci: switch to pci_alloc_irq_vectorsChristoph Hellwig1-71/+29
Use the modern API to request MSI or MSI-X interrupts, which allows us to get rid of the msix_entries array, as well as cleaning up the cleanup code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: xhci: remove xhci_dbg_ctx()Lu Baolu1-37/+0
XHCI context changes have already been traced by the trace events. It's unnecessary to put the same message in kernel log. This patch removes the use of xhci_dbg_ctx(). Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: xhci: remove ring debugging codeLu Baolu1-6/+0
XHCI ring changes have already been traced by the ring trace events. It's unnecessary to put the same messages in kernel log. This patch removes the debugging code for a ring. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: xhci: remove error messages for failed memory allocationLu Baolu1-6/+7
Omit extra messages for memory allocation failure. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: xhci: make several functions staticLu Baolu1-29/+30
Several functions have a single user in the same file where it is defined. There's no need to expose it anywhere else. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08xhci: Rework how we handle unresponsive or hoptlug removed hostsMathias Nyman1-2/+14
Introduce a new xhci_hc_died() function that takes care of handling pending commands and URBs if a host controller becomes unresponsive. This addresses issues on hotpluggable xhci controllers that disappear from the bus suddenly, often while the bus (PCI) remove function is still being processed. xhci_hc_died() sets a XHCI_STATUS_DYING flag to prevent new URBs and commands or to be queued. The flag also ensures xhci_hc_died() will give back pending commands and URBs once. Host is considered dead if register read returns 0xffffffff, or host fails to abort the command ring, or fails stopping an endpoint after trying for 5 seconds. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08xhci: Do not halt the host until both HCD have disconnected their devices.Joel Stanley1-10/+10
We can't halt the host controller immediately when first HCD is removed as it will cause problems if we have devices attached to the second (primary) HCD, like a keyboard. We've been carrying this in our Linux-as-a-bootloader environment for a little while now. The machines all have the same TI TUSB73x0 part, and when we kexec the devices don't come back until a system power cycle. [minor adjustments, code comments and remove HALT check -Mathias] Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: host: xhci: add Slot and EP Context tracersFelipe Balbi1-2/+13
With these, we can track what's happening with the HW while executing each and every command. It will give us visibility into how the different contexts are being modified by xHC which can bring insight into problems while debugging. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: xhci: Expose xhci_start() function.Guoqing Zhang1-1/+1
Change the visability of xhci_start() so that it can be used when enabling test mode. Signed-off-by: Guoqing Zhang <guoqing.zhang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: xhci: Add helper function xhci_disable_slot().Guoqing Zhang1-18/+31
Refactoring slot disable related code into a helper function xhci_disable_slot() which can be used when enabling test mode. Signed-off-by: Guoqing Zhang <guoqing.zhang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: xhci: clear EINT bit in status correctlyLu Baolu1-2/+2
EINT(Event Interrupt) is a write-1-to-clear type of bit in xhci status register. It should be cleared by writing a 1. Writing 0 to this bit has no effect. Xhci driver tries to clear this bit by writing 0 to it. This is not the right way to go. This patch corrects this by reading the register first, then clearing all RO/RW1C/RsvZ bits and setting the clearing bit, and writing back the new value at last. Xhci spec requires that software that uses EINT shall clear it prior to clearing any IP flags in section 5.4.2. This is the reason why this patch is CC'ed stable as well. [old way didn't cause any issues, skip stable, send to next -Mathias] Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-03Merge 4.11-rc5 into usb-nextGreg Kroah-Hartman1-18/+25
We want the usb fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-29xhci: Manually give back cancelled URB if we can't queue it for cancelMathias Nyman1-18/+25
xhci needs to take care of four scenarios when asked to cancel a URB. 1 URB is not queued or already given back. usb_hcd_check_unlink_urb() will return an error, we pass the error on 2 We fail to find xhci internal structures from urb private data such as virtual device and endpoint ring. Give back URB immediately, can't do anything about internal structures. 3 URB private data has valid pointers to xhci internal data, but host is not responding. give back URB immedately and remove the URB from the endpoint lists. 4 Everyting is working add URB to cancel list, queue a command to stop the endpoint, after which the URB can be turned to no-op or skipped, removed from lists, and given back. We failed to give back the urb in case 2 where the correct device and endpoint pointers could not be retrieved from URB private data. This caused a hang on Dell Inspiron 5558/0VNM2T at resume from suspend as urb was never returned. [ 245.270505] INFO: task rtsx_usb_ms_1:254 blocked for more than 120 seconds. [ 245.272244] Tainted: G W 4.11.0-rc3-ARCH #2 [ 245.273983] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 245.275737] rtsx_usb_ms_1 D 0 254 2 0x00000000 [ 245.277524] Call Trace: [ 245.279278] __schedule+0x2d3/0x8a0 [ 245.281077] schedule+0x3d/0x90 [ 245.281961] usb_kill_urb.part.3+0x6c/0xa0 [usbcore] [ 245.282861] ? wake_atomic_t_function+0x60/0x60 [ 245.283760] usb_kill_urb+0x21/0x30 [usbcore] [ 245.284649] usb_start_wait_urb+0xe5/0x170 [usbcore] [ 245.285541] ? try_to_del_timer_sync+0x53/0x80 [ 245.286434] usb_bulk_msg+0xbd/0x160 [usbcore] [ 245.287326] rtsx_usb_send_cmd+0x63/0x90 [rtsx_usb] Reported-by: diego.viola@gmail.com Tested-by: diego.viola@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23usb: xhci: use bus->sysdev for DMA configurationArnd Bergmann1-4/+11
For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. So, set the dma for xhci from sysdev. sysdev is pointing to device that is known to the system firmware or hardware. Cc: Baolin Wang <baolin.wang@linaro.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HWyuan linyu1-1/+1
a lot of embeded system SOC (e.g. freescale T2080) have both PCI and USB modules. But USB module is controlled by registers directly, it have no relationship with PCI module. when say N here it will not build PCI related code in USB driver. Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-10scripts/spelling.txt: add "disble(d)" pattern and fix typo instancesMasahiro Yamada1-2/+2
Fix typos and add the following to the scripts/spelling.txt: disble||disable disbled||disabled I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c untouched. The macro is not referenced at all, but this commit is touching only comment blocks just in case. Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-25xhci: refactor xhci_urb_enqueueMathias Nyman1-56/+37
Use switch instead of several if statements Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: simplify how we store TDs in urb private dataMathias Nyman1-18/+6
Instead of storing a zero length array of td pointers, and then allocate memory both for the td pointer array and the td's, just use a zero length array of actual td's in urb private data. old: struct urb_priv { struct xhci_td *td[0] } new: struct urb_priv { struct xhci_td td[0] } Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: Rename variables related to transfer descritporsMathias Nyman1-7/+7
urb_priv structure has a count on how many TDs the URB contains, and how many of those TD's we have handled. rename: length -> num_tds td_cnt -> num_tds_done No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: rename size variable to num_tdsMathias Nyman1-8/+8
No functinal changes. num_tds describes the number of transfer descriptor better than "size" Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 12:39:02 +0300