summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ohci-s3c2410.c
AgeCommit message (Collapse)AuthorFilesLines
2009-03-25USB: S3C: Move usb-control.h to platform includeBen Dooks1-2/+1
The usb-control.h is needed by ohci-s3c2410.c for both S3C24XX and S3C64XX architectures, so move it to <plat/usb-control.h> Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-25USB: ohci-s3c2410: fix name of bus clockBen Dooks1-1/+1
The USB bus clock is usb-bus-host, so print the correct name in the dev_err() statement if we cannot find it. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Acked-by: David Brownell <dbrownell@users.sourceforge.net>
2009-03-25USB: ohci-s3c2410: remove <mach/hardware.h> includeBen Dooks1-1/+0
Remove the include of <mach/hardware.h>, as no definitions from it are used by the OHCI driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: automatically enable RHSC interruptsAlan Stern1-1/+0
This patch (as1069c) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King1-2/+2
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King1-1/+1
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-11Fix name of Russell King in various commentsUwe Kleine-König1-1/+1
This patch was created by git grep -E -l 'Rus(el|s?e)l King' | xargs -r -t perl -p -i -e 's/Rus(el|s?e)l King/Russell King/g' Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Most-Definitely-Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-06Revert "USB: don't explicitly reenable root-hub status interrupts"Linus Torvalds1-0/+1
This reverts commit e872154921a6b5256a3c412dd69158ac0b135176. Andrey Borzenkov reports that it resulted in a totally hung machine for him when loading the OHCI driver. Extensive netconsole capture with SysRq output shows that modprobe gets stuck in ohci_hub_status_data() when probing and enabling the OHCI controller, see for example http://lkml.org/lkml/2008/7/5/236 for an analysis. The problem appears to be an interrupt flood triggered by the commit that gets reverted, and Andrey confirmed that the revert makes things work for him again. Reported-and-tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25USB: don't explicitly reenable root-hub status interruptsAlan Stern1-1/+0
This patch (as1069b) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-11usb host: fix platform driver hotplug/coldplugKay Sievers1-0/+1
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable USB HCDs, to allow re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Add missing newlines to some uses of dev_<level> messagesJoe Perches1-1/+1
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-08ohci: Rework bus glue integration to allow several at onceSylvain Munaut1-12/+0
The previous model had the module_init & module_exit function in the bus glue .c files themselves. That's a problem if several glues need to be selected at once and the driver is built has module. This case is quite common in embedded system where you want to handle both the integrated ohci controller and some extra controller on PCI. The ohci-hcd.c file now provide the module_init & module_exit and appropriate driver registering/unregistering is done conditionally, using #ifdefs. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20USB: ohci whitespace/comment fixupsDavid Brownell1-2/+2
This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace (space before tab, at end of line) as well as the obsolete inline changelog. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: Properly unregister reboot notifier in case of failure in ehci hcdAleksey Gorelov1-0/+2
If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: ohci-s3c2410.c: clock now usb-bus-hostBen Dooks1-1/+1
With the newer Samsung S3C2412 and S3C2413 SoC devices, the 48MHz USB clock has been given an individual gate into the USB OHCI and gadget blocks. This clock is called usb-bus-clock, and we need to replace the old use of the USB PLL (upll) directly with the new usb-bus-host. The S3C2410 clock driver has been updated already to provide a virtual clock which is a child of the UPLL to maintain compatibility. The S3C2412 clock driver correctly enables the PLL when either usb-bus clock is active. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27USB: OHCI avoids root hub timer pollingDavid Brownell1-0/+1
This teaches OHCI to use the root hub status change (RHSC) IRQ, bypassing root hub timers most of the time and switching over to the "new" root hub polling scheme. It's complicated by the fact that implementations of OHCI trigger and ack that IRQ differently (the spec is vague there). Avoiding root hub timers helps mechanisms like "dynamic tick" leave the CPU in lowpower modes for longer intervals. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-03[PATCH] irq-flags: usb: Use the new IRQF_ constantsThomas Gleixner1-1/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-14[PATCH] USB: S3C2410: use clk_enable() to ensure 48MHz to OHCI coreBen Dooks1-8/+24
Get the "usb-bus" clock and ensure it is enabled when the OHCI core is in use. It seems that a few bootloaders do not enable the UPLL at startup, which stops the OHCI core having a 48MHz bus clock. The improvements to the clock framework for the s3c24xx now allow the USB PLL to be started and stopped when being used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: cleanups for ohci-s3c2410.cBen Dooks1-4/+5
Fix compile errors due to functions not being defined static Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-28[PATCH] Typo fixesAlexey Dobriyan1-1/+1
Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-07[ARM] Move asm/hardware/clock.h to linux/clk.hRussell King1-1/+1
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03[ARM] Remove clk_use()/clk_unuse()Russell King1-2/+0
It seems that clk_use() and clk_unuse() are additional complexity which isn't required anymore. Remove them from the clock framework to avoid the additional confusion which they cause, and update all ARM machine types except for OMAP. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[DRIVER MODEL] Convert platform drivers to use struct platform_driverRussell King1-11/+10
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King1-0/+2
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29[PATCH] USB: S3C2410 OHCI - add driver owner fieldBen Dooks1-0/+1
Initialise the .owner field of the driver with the module that owns it, to aid in linking drivers to modules. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspendAlan Stern1-2/+2
This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29[PATCH] all HCDs provide root hub suspend/resume methodsDavid Brownell1-0/+1
This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
2005-10-29[PATCH] remove some USB_SUSPEND dependenciesDavid Brownell1-2/+1
This simplifies some of the PM-related #ifdeffing by recognizing that USB_SUSPEND depends on PM. Also, OHCI drivers were often testing for USB_SUSPEND when they should have tested just PM. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 2 ++ drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 4 ++-- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 3 +-- drivers/usb/host/ohci-sa1111.c | 2 +- 9 files changed, 12 insertions(+), 11 deletions(-)
2005-09-29[ARM] Don't include mach-types.h unnecessarilyRussell King1-1/+0
It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-09[PATCH] USB: S3C24XX port numbering fixBen Dooks1-2/+2
Fix the port numbering confusion for the S3C24XX platform device information as reported by Rudy <rudyboy168@gmail.com> This patch ensurs that the the ports are numbered 0 and 1. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-30[PATCH] USB: add S3C24XX USB Host driver supportBen Dooks1-0/+496
USB (OHCI) Host driver for S3C2410/S3C2440 based systems Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 12:58:54 +0300