summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc3
AgeCommit message (Collapse)AuthorFilesLines
2020-04-17usb: dwc3: gadget: Fix request completion checkThinh Nguyen1-10/+2
A request may not be completed because not all the TRBs are prepared for it. This happens when we run out of available TRBs. When some TRBs are completed, the driver needs to prepare the rest of the TRBs for the request. The check dwc3_gadget_ep_request_completed() shouldn't be checking the amount of data received but rather the number of pending TRBs. Revise this request completion check. Cc: stable@vger.kernel.org Fixes: e0c42ce590fe ("usb: dwc3: gadget: simplify IOC handling") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-04-16usb: dwc3: gadget: Do link recovery for SS and SSPThinh Nguyen1-6/+2
The controller always supports link recovery for device in SS and SSP. Remove the speed limit check. Also, when the device is in RESUME or RESET state, it means the controller received the resume/reset request. The driver must send the link recovery to acknowledge the request. They are valid states for the driver to send link recovery. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Fixes: ee5cd41c9117 ("usb: dwc3: Update speed checks for SuperSpeedPlus") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-04-16usb: dwc3: gadget: Properly set maxpacket limitThinh Nguyen2-11/+45
Currently the calculation of max packet size limit for IN endpoints is too restrictive. This prevents a matching of a capable hardware endpoint during configuration. Below is the minimum recommended HW configuration to support a particular endpoint setup from the databook: For OUT endpoints, the databook recommended the minimum RxFIFO size to be at least 3x MaxPacketSize + 3x setup packets size (8 bytes each) + clock crossing margin (16 bytes). For IN endpoints, the databook recommended the minimum TxFIFO size to be at least 3x MaxPacketSize for endpoints that support burst. If the endpoint doesn't support burst or when the device is operating in USB 2.0 mode, a minimum TxFIFO size of 2x MaxPacketSize is recommended. Base on these recommendations, we can calculate the MaxPacketSize limit of each endpoint. This patch revises the IN endpoint MaxPacketSize limit and also sets the MaxPacketSize limit for OUT endpoints. Reference: Databook 3.30a section 3.2.2 and 3.2.3 Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-04-16usb: dwc3: Fix GTXFIFOSIZ.TXFDEP macro nameThinh Nguyen2-4/+4
Change the macro name DWC3_GTXFIFOSIZ_TXFDEF to DWC3_GTXFIFOSIZ_TXFDEP to match with the register name GTXFIFOSIZ.TXFDEP. Fixes: 457e84b6624b ("usb: dwc3: gadget: dynamically re-size TxFifos") Fixes: 0cab8d26d6e5 ("usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-16usb: dwc3: fix up for role switch API changeStephen Rothwell1-4/+6
After merging the usb-gadget tree, today's linux-next build (arm multi_v7_defconfig) failed like this: drivers/usb/dwc3/drd.c: In function 'dwc3_setup_role_switch': drivers/usb/dwc3/drd.c:551:23: error: assignment to 'usb_role_switch_set_t' {aka 'int (*)(struct usb_role_switch *, enum usb_role)'} from incompatible pointer type 'int (*)(struct device *, enum usb_role)' [-Werror=incompatible-pointer-types] 551 | dwc3_role_switch.set = dwc3_usb_role_switch_set; | ^ drivers/usb/dwc3/drd.c:552:23: error: assignment to 'usb_role_switch_get_t' {aka 'enum usb_role (*)(struct usb_role_switch *)'} from incompatible pointer type 'enum usb_role (*)(struct device *)' [-Werror=incompatible-pointer-types] 552 | dwc3_role_switch.get = dwc3_usb_role_switch_get; | ^ Caused by commit 8a0a13799744 ("usb: dwc3: Registering a role switch in the DRD code.") interacting with commit bce3052f0c16 ("usb: roles: Provide the switch drivers handle to the switch in the API") from the usb tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20200316143752.473f1073@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-16Merge tag 'usb-for-v5.7' of ↵Greg Kroah-Hartman8-81/+256
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.7 merge window Lots of changes on dwc3 this time, most of them from Thinh fixing a bunch of really old mishaps on the driver. DWC2 got support for STM32MP15 and a couple RockChip SoCs while DWC3 learned about Amlogic A1 family. Apart from these, we have a few spelling fixes and other minor non-critical fixes all over the place. Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'usb-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (41 commits) dt-bindings: usb: add documentation for aspeed usb-vhub ARM: dts: aspeed-g4: add vhub port and endpoint properties ARM: dts: aspeed-g5: add vhub port and endpoint properties ARM: dts: aspeed-g6: add usb functions usb: gadget: aspeed: add ast2600 vhub support usb: gadget: aspeed: read vhub properties from device tree usb: gadget: aspeed: support per-vhub usb descriptors usb: gadget: f_phonet: Replace zero-length array with flexible-array member usb: gadget: composite: Inform controller driver of self-powered usb: gadget: amd5536udc: fix spelling mistake "reserverd" -> "reserved" udc: s3c-hsudc: Silence warning about supplies during deferred probe usb: dwc2: Silence warning about supplies during deferred probe dt-bindings: usb: dwc2: add compatible property for rk3368 usb dt-bindings: usb: dwc2: add compatible property for rk3328 usb usb: gadget: add raw-gadget interface usb: dwc2: Implement set_selfpowered() usb: dwc3: qcom: Replace <linux/clk-provider.h> by <linux/of_clk.h> usb: dwc3: core: don't do suspend for device mode if already suspended usb: dwc3: Rework resets initialization to be more flexible usb: dwc3: Rework clock initialization to be more flexible ...
2020-03-15usb: dwc3: qcom: Replace <linux/clk-provider.h> by <linux/of_clk.h>Geert Uytterhoeven1-1/+1
The DWC3 USB driver is not a clock provider, and just needs to call of_clk_get_parent_count(). Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: core: don't do suspend for device mode if already suspendedLi Jun1-0/+2
If dwc->dev in device mode already runtime suspended, don't do it again for system suspend. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: Rework resets initialization to be more flexibleJohn Stultz1-1/+1
The dwc3 core binding specifies one reset. However some variants of the hardware may have more. Previously this was handled by using the dwc3-of-simple glue driver, but that resulted in a proliferation of bindings for for every variant, when the only difference was the clocks and resets lists. So this patch reworks the reading of the resets to fetch all the resets specified in the dts together. This patch was recommended by Rob Herring <robh@kernel.org> as an alternative to creating multiple bindings for each variant of hardware. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> CC: ShuFan Lee <shufan_lee@richtek.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Yu Chen <chenyu56@huawei.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jun Li <lijun.kernel@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Guillaume Gardet <Guillaume.Gardet@arm.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: linux-usb@vger.kernel.org Cc: devicetree@vger.kernel.org Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: Rework clock initialization to be more flexibleJohn Stultz1-15/+5
The dwc3 core binding specifies three clocks: ref, bus_early, and suspend which are all controlled in the driver together. However some variants of the hardware my not have all three clks, or some may have more. Usually this was handled by using the dwc3-of-simple glue driver, but that resulted in a proliferation of bindings for for every variant, when the only difference was the clocks and resets lists. So this patch reworks the reading of the clks from the dts to use devm_clk_bulk_get_all() will will fetch all the clocks specified in the dts together. This patch was recommended by Rob Herring <robh@kernel.org> as an alternative to creating multiple bindings for each variant of hardware. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> CC: ShuFan Lee <shufan_lee@richtek.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Yu Chen <chenyu56@huawei.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jun Li <lijun.kernel@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Guillaume Gardet <Guillaume.Gardet@arm.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: linux-usb@vger.kernel.org Cc: devicetree@vger.kernel.org Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: Add support for role-switch-default-mode bindingJohn Stultz2-3/+25
Support the new role-switch-default-mode binding for configuring the default role the controller assumes as when the usb role is USB_ROLE_NONE This patch was split out from a larger patch originally by Yu Chen <chenyu56@huawei.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> CC: ShuFan Lee <shufan_lee@richtek.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Yu Chen <chenyu56@huawei.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jun Li <lijun.kernel@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Guillaume Gardet <Guillaume.Gardet@arm.com> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Jack Pham <jackp@codeaurora.org> Cc: linux-usb@vger.kernel.org Cc: devicetree@vger.kernel.org Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: Registering a role switch in the DRD code.Yu Chen2-1/+79
The Type-C drivers use USB role switch API to inform the system about the negotiated data role, so registering a role switch in the DRD code in order to support platforms with USB Type-C connectors. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> CC: ShuFan Lee <shufan_lee@richtek.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Yu Chen <chenyu56@huawei.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jun Li <lijun.kernel@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Guillaume Gardet <Guillaume.Gardet@arm.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: linux-usb@vger.kernel.org Cc: devicetree@vger.kernel.org Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Yu Chen <chenyu56@huawei.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: core: add support for disabling SS instances in park modeNeil Armstrong2-0/+9
In certain circumstances, the XHCI SuperSpeed instance in park mode can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high load on the single XHCI SuperSpeed instance, the controller can crash like: xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. xhci-hcd xhci-hcd.0.auto: Host halt failed, -110 xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. hub 2-1.1:1.0: hub_ext_port_status failed (err = -22) xhci-hcd xhci-hcd.0.auto: HC died; cleaning up usb 2-1.1-port1: cannot reset (err = -22) Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates the issue. The bit is described as : "When this bit is set to '1' all SS bus instances in park mode are disabled" Synopsys explains: The GUCTL1.PARKMODE_DISABLE_SS is only available in dwc_usb3 controller running in host mode. This should not be set for other IPs. This can be disabled by default based on IP, but I recommend to have a property to enable this feature for devices that need this. CC: Dongjin Kim <tobetter@gmail.com> Cc: Jianxin Pan <jianxin.pan@amlogic.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Jun Li <lijun.kernel@gmail.com> Reported-by: Tim <elatllat@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: gadget: Wrap around when skip TRBsThinh Nguyen1-1/+1
When skipping TRBs, we need to account for wrapping around the ring buffer and not modifying some invalid TRBs. Without this fix, dwc3 won't be able to check for available TRBs. Cc: stable <stable@vger.kernel.org> Fixes: 7746a8dfb3f9 ("usb: dwc3: gadget: extract dwc3_gadget_ep_skip_trbs()") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: gadget: Don't clear flags before transfer endedThinh Nguyen1-3/+1
We track END_TRANSFER command completion. Don't clear transfer started/ended flag prematurely. Otherwise, we'd run into the problem with restarting transfer before END_TRANSFER command finishes. Fixes: 6d8a019614f3 ("usb: dwc3: gadget: check for Missed Isoc from event status") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: Remove kernel doc annotation where it's not neededAndy Shevchenko1-1/+1
The main comment in the file mistakenly marked with kernel doc annotation which makes the parser unhappy: .../dwc3/host.c:16: warning: Function parameter or member 'dwc' not described in 'dwc3_host_get_irq' Drop kernel doc annotation from host.c module. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: Add ACPI support for xHCI portsAndy Shevchenko1-0/+2
The ACPI companion of the adapter has to be set for xHCI controller code to read and attach the ports described in the ACPI table. Use ACPI_COMPANION_SET macro to set this. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: exynos: Add support for Exynos5422 suspend clkAnand Moon1-0/+9
Exynos5422 DWC3 module support two clk USBD300 and SCLK_USBD300 so add missing code to enable/disable code and suspend clk, for this add a new compatible samsung,exynos5420-dwusb3 to help configure dwc3 code and dwc3 suspend clock. Suspend clock controls the PHY power change from P0 to P1/P2/P3 during U0 to U1/U2/U3 transition. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: meson-g12a: Don't use ret uninitialized in dwc3_meson_g12a_otg_initNathan Chancellor1-1/+1
Clang warns: ../drivers/usb/dwc3/dwc3-meson-g12a.c:421:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (priv->otg_mode == USB_DR_MODE_OTG) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/usb/dwc3/dwc3-meson-g12a.c:455:9: note: uninitialized use occurs here return ret; ^~~ ../drivers/usb/dwc3/dwc3-meson-g12a.c:421:2: note: remove the 'if' if its condition is always true if (priv->otg_mode == USB_DR_MODE_OTG) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/usb/dwc3/dwc3-meson-g12a.c:415:9: note: initialize the variable 'ret' to silence this warning int ret, irq; ^ = 0 1 warning generated. It is not wrong, ret is only used when that if statement is true. Just directly return 0 at the end to avoid this. Fixes: 729149c53f04 ("usb: dwc3: Add Amlogic A1 DWC3 glue") Reported-by: kbuild test robot <lkp@intel.com> Link: https://groups.google.com/d/msg/clang-built-linux/w5iBENco_m4/PPuXreAxBQAJ Link: https://github.com/ClangBuiltLinux/linux/issues/869 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: Add Amlogic A1 DWC3 glueHanjie Lin1-56/+116
Adds support for Amlogic A1 USB Control Glue HW. The Amlogic A1 SoC Family embeds 1 USB Controllers: - a DWC3 IP configured as Host for USB2 and USB3 A glue connects the controllers to the USB2 PHY of A1 SoC. Signed-off-by: Yue Wang <yue.wang@amlogic.com> Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc3: trace: print enqueue/dequeue pointers tooFelipe Balbi1-2/+7
By printing enqueue/dequeue pointers, we can make sure that our TRB handling is correct. We've had a recent situation where we were not always dequeueing all TRBs in an SG list and this helped figure out what the problem was. Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-10Merge 5.6-rc5 into usb-nextGreg Kroah-Hartman1-1/+8
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: roles: Provide the switch drivers handle to the switch in the APIHeikki Krogerus1-4/+6
The USB role callback functions had a parameter pointing to the parent device (struct device) of the switch. The assumption was that the switch parent is always the controller. Firstly, that may not be true in every case, and secondly, it prevents us from supporting devices that supply multiple muxes. Changing the first parameter of usb_role_switch_set_t and usb_role_switch_get_t from struct device to struct usb_role_switch. Cc: Peter Chen <Peter.Chen@nxp.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Bin Liu <b-liu@ti.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200302135353.56659-6-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: dwc3: gadget: Update chain bit correctly when using sg listPratham Pratap1-1/+8
If scatter-gather operation is allowed, a large USB request is split into multiple TRBs. For preparing TRBs for sg list, driver iterates over the list and creates TRB for each sg and mark the chain bit to false for the last sg. The current IOMMU driver is clubbing the list of sgs which shares a page boundary into one and giving it to USB driver. With this the number of sgs mapped it not equal to the the number of sgs passed. Because of this USB driver is not marking the chain bit to false since it couldn't iterate to the last sg. This patch addresses this issue by marking the chain bit to false if it is the last mapped sg. At a practical level, this patch resolves USB transfer stalls seen with adb on dwc3 based db845c, pixel3 and other qcom hardware after functionfs gadget added scatter-gather support around v4.20. Credit also to Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> who implemented a very similar fix to this issue. Cc: Felipe Balbi <balbi@kernel.org> Cc: Yang Fei <fei.yang@intel.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Tejas Joglekar <tejas.joglekar@synopsys.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: Todd Kjos <tkjos@google.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linux USB List <linux-usb@vger.kernel.org> Cc: stable <stable@vger.kernel.org> #4.20+ Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org> [jstultz: Slight tweak to remove sg_is_last() usage, reworked commit message, minor comment tweak] Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20200302214443.55783-1-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-24Merge 5.6-rc3 into usb-nextGreg Kroah-Hartman2-25/+17
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12usb: dwc3: qcom: Replace <linux/clk-provider.h> by <linux/of_clk.h>Geert Uytterhoeven1-1/+1
The DWC3 USB driver is not a clock provider, and just needs to call of_clk_get_parent_count(). Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200212101853.9349-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11usb: dwc3: debug: fix string position formatting mixup with ret and lenColin Ian King1-24/+15
Currently the string formatting is mixing up the offset of ret and len. Re-work the code to use just len, remove ret and use scnprintf instead of snprintf and len position accumulation where required. Remove the -ve return check since scnprintf never returns a failure -ve size. Also break overly long lines to clean up checkpatch warnings. Addresses-Coverity: ("Unused value") Fixes: 1381a5113caf ("usb: dwc3: debug: purge usage of strcat") Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-02-11usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fieldsAnurag Kumar Vulisha1-1/+2
The current code in dwc3_gadget_ep_reclaim_completed_trb() will check for IOC/LST bit in the event->status and returns if IOC/LST bit is set. This logic doesn't work if multiple TRBs are queued per request and the IOC/LST bit is set on the last TRB of that request. Consider an example where a queued request has multiple queued TRBs and IOC/LST bit is set only for the last TRB. In this case, the core generates XferComplete/XferInProgress events only for the last TRB (since IOC/LST are set only for the last TRB). As per the logic in dwc3_gadget_ep_reclaim_completed_trb() event->status is checked for IOC/LST bit and returns on the first TRB. This leaves the remaining TRBs left unhandled. Similarly, if the gadget function enqueues an unaligned request with sglist already in it, it should fail the same way, since we will append another TRB to something that already uses more than one TRB. To aviod this, this patch changes the code to check for IOC/LST bits in TRB->ctrl instead. At a practical level, this patch resolves USB transfer stalls seen with adb on dwc3 based HiKey960 after functionfs gadget added scatter-gather support around v4.20. Cc: Felipe Balbi <balbi@kernel.org> Cc: Yang Fei <fei.yang@intel.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Tejas Joglekar <tejas.joglekar@synopsys.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: Todd Kjos <tkjos@google.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linux USB List <linux-usb@vger.kernel.org> Cc: stable <stable@vger.kernel.org> Tested-by: Tejas Joglekar <tejas.joglekar@synopsys.com> Reviewed-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> [jstultz: forward ported to mainline, reworded commit log, reworked to only check trb->ctrl as suggested by Felipe] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-01-29Merge tag 'usb-5.6-rc1' of ↵Linus Torvalds7-26/+61
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...
2020-01-27Merge tag 'devprop-5.6-rc1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "Add support for reference properties in sofrware nodes (Dmitry Torokhov) and a basic test for property entries along with fixes on top of it (Dmitry Torokhov, Qian Cai, Alan Maguire)" * tag 'devprop-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: software node: introduce CONFIG_KUNIT_DRIVER_PE_TEST usb: dwc3: use proper initializers for property entries drivers/base/test: fix global-out-of-bounds error software node: add basic tests for property entries software node: remove separate handling of references platform/x86: intel_cht_int33fe: use inline reference properties software node: implement reference properties software node: allow embedding of small arrays into property_entry software node: replace is_array with is_inline
2020-01-22usb: dwc3: pci: add ID for the Intel Comet Lake -V variantHeikki Krogerus1-0/+4
There is one more Comet Lake PCH variant, CML-V, that has its own PCI ID. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200117093033.48616-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: dwc3: gadget: Remove END_TRANSFER delayThinh Nguyen1-13/+5
We had a 100us delay to synchronize the END_TRANSFER command completion before giving back requests to the function drivers. Now, the controller driver can handle cancelled TRBs with the requests' cancelled_list and it can also wait until the END_TRANSFER completion before starting new transfers. Synchronization can simply base on the controller's command completion interrupt. The 100us delay is no longer needed. Remove this arbitrary delay. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: dwc3: gadget: Delay starting transferThinh Nguyen2-0/+12
If the END_TRANSFER command hasn't completed yet, then don't send the START_TRANSFER command. The controller may not be able to start if that's the case. Some controller revisions depend on this. See commit 76a638f8ac0d ("usb: dwc3: gadget: wait for End Transfer to complete"). Let's only send START_TRANSFER command after the END_TRANSFER command had completed. Fixes: 3aec99154db3 ("usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: dwc3: gadget: Check END_TRANSFER completionThinh Nguyen3-2/+9
While the END_TRANSFER command is sent but not completed, any request dequeue during this time will cause the driver to issue the END_TRANSFER command. The driver needs to submit the command only once to stop the controller from processing further. The controller may take more time to process the same command multiple times unnecessarily. Let's add a flag DWC3_EP_END_TRANSFER_PENDING to check for this condition. Fixes: 3aec99154db3 ("usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: dwc3: turn off VBUS when leaving host modeBin Liu1-0/+3
VBUS should be turned off when leaving the host mode. Set GCTL_PRTCAP to device mode in teardown to de-assert DRVVBUS pin to turn off VBUS power. Fixes: 5f94adfeed97 ("usb: dwc3: core: refactor mode initialization to its own function") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: dwc3: gadget: Clear DCTL.ULSTCHNGREQ before setThinh Nguyen1-0/+3
Send a no-action link state change request before the actual request so DWC3 can send the same request whenever we call dwc3_gadget_set_link_state(). Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: dwc3: gadget: Set link state to RX_Detect on disconnectThinh Nguyen1-0/+2
When DWC3 receives disconnect event, it needs to set the link state to RX_Detect. DWC_usb3 3.30a programming guide 4.1.7 Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: dwc3: gadget: Don't send unintended link state changeThinh Nguyen2-9/+21
DCTL.ULSTCHNGREQ is a write-only field. When doing a read-modify-write to DCTL, the driver must make sure that there's no unintended link state change request from whatever is read from DCTL.ULSTCHNGREQ. Set link state change to no-action when the driver writes to DCTL. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13Merge 5.5-rc6 into usb-nextGreg Kroah-Hartman1-0/+7
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09usb: exynos: Rename Samsung and Exynos to lowercaseKrzysztof Kozlowski1-2/+2
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200104152107.11407-9-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09usb: dwc3: use proper initializers for property entriesDmitry Torokhov1-3/+3
We should not be reaching into property entries and initialize them by hand, but rather use proper initializer macros. This way we can alter internal representation of property entries with no visible changes to their users. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-30usb: dwc3: gadget: Fix request complete checkThinh Nguyen1-0/+7
We can only check for IN direction if the request had completed. For OUT direction, it's perfectly fine that the host can send less than the setup length. Let's return true fall all cases of OUT direction. Fixes: e0c42ce590fe ("usb: dwc3: gadget: simplify IOC handling") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Link: https://lore.kernel.org/r/ac5a3593a94fdaa3d92e6352356b5f7a01ccdc7c.1576291140.git.thinhn@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12usb: dwc3: pci: add ID for the Intel Comet Lake -H variantHeikki Krogerus1-1/+5
The original ID that was added for Comet Lake PCH was actually for the -LP (low power) variant even though the constant for it said CMLH. Changing that while at it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191212093713.60614-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: dwc3: ep0: Clear started flag on completionThinh Nguyen1-0/+8
Clear ep0's DWC3_EP_TRANSFER_STARTED flag if the END_TRANSFER command is completed. Otherwise, we can't start control transfer again after END_TRANSFER. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2019-12-10usb: dwc3: gadget: Clear started flag for non-IOCThinh Nguyen1-0/+3
Normally the END_TRANSFER command completion handler will clear the DWC3_EP_TRANSFER_STARTED flag. However, if the command was sent without interrupt on completion, then the flag will not be cleared. Make sure to clear the flag in this case. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2019-12-10usb: dwc3: gadget: Fix logical conditionTejas Joglekar1-1/+1
This patch corrects the condition to kick the transfer without giving back the requests when either request has remaining data or when there are pending SGs. The && check was introduced during spliting up the dwc3_gadget_ep_cleanup_completed_requests() function. Fixes: f38e35dd84e2 ("usb: dwc3: gadget: split dwc3_gadget_ep_cleanup_completed_requests()") Cc: stable@vger.kernel.org Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2019-11-21usb: dwc3: Fix Kconfig indentationKrzysztof Kozlowski1-15/+15
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191121132914.29368-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-18Merge tag 'usb-for-v5.5' of ↵Greg Kroah-Hartman3-10/+59
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.5 We have TI's glue layer for the Cadence USB3 controller going upstream. Tegra's XUDC driver is also going upstream with this pull request. Apart from these two big features, we have a bunch of patches switching over to devm_platform_ioremap_resource() in order to simplify code a little; and a non-critical fix for DWC3 usage via kexec. * tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (44 commits) usb: dwc3: of-simple: add a shutdown usb: cdns3: Add TI specific wrapper driver dt-bindings: usb: Add binding for the TI wrapper for Cadence USB3 controller usb: mtu3: fix race condition about delayed_status usb: gadget: Add UDC driver for tegra XUSB device mode controller usb: dwc3: debug: Remove newline printout usb: dwc2: use a longer core rest timeout in dwc2_core_reset() usb: gadget: udc: lpc32xx: Use devm_platform_ioremap_resource() in lpc32xx_udc_probe() USB: gadget: udc: clean up an indentation issue usb: gadget: Quieten gadget config message phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq usb: gadget: Remove set but not used variable 'opts' in msg_do_config usb: gadget: Remove set but not used variable 'opts' in acm_ms_do_config usb: mtu3: add a new function to do status stage usb: gadget: configfs: fix concurrent issue between composite APIs usb: gadget: f_tcm: Provide support to get alternate setting in tcm function usb: gadget: Correct NULL pointer checking in fsl gadget usb: fsl: Remove unused variable USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein USB: dummy-hcd: increase max number of devices to 32 ...
2019-11-14usb: dwc3: create debugfs directory under usb rootChunfeng Yun1-1/+1
Now the USB gadget subsystem can use the USB debugfs root directory, so move dwc3's directory from the root of the debugfs filesystem into the root of usb Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1573541519-28488-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04Merge 5.4-rc6 into usb-nextGreg Kroah-Hartman4-3/+9
We need the USB fixes in here to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>