summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc2/gadget.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-29usb: dwc2: Fix INTR OUT transfers in DDMA mode.Minas Harutyunyan1-7/+33
[ Upstream commit b2c586eb07efab982419f32b7c3bd96829bc8bcd ] In DDMA mode if INTR OUT transfers mps not multiple of 4 then single packet corresponds to single descriptor. Descriptor limit set to mps and desc chain limit set to mps * MAX_DMA_DESC_NUM_GENERIC. On that descriptors complete, to calculate transfer size should be considered correction value for each descriptor. In start request function, if "continue" is true then dma buffer address should be incremmented by offset for all type of transfers, not only for Control DATA_OUT transfers. Fixes: cf77b5fb9b394 ("usb: dwc2: gadget: Transfer length limit checking for DDMA") Fixes: e02f9aa6119e0 ("usb: dwc2: gadget: EP 0 specific DDMA programming") Fixes: aa3e8bc81311e ("usb: dwc2: gadget: DDMA transfer start and complete") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30usb: dwc2: Postponed gadget registration to the udc class driverMinas Harutyunyan1-6/+0
commit 207324a321a866401b098cadf19e4a2dd6584622 upstream. During dwc2 driver probe, after gadget registration to the udc class driver, if exist any builtin function driver it immediately bound to dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode. Patch postpone gadget registration after host side initialization done. Fixes: 117777b2c3bb9 ("usb: dwc2: Move gadget probe function into platform code") Reported-by: kbuild test robot <lkp@intel.com> Tested-by: Marek Vasut <marex@denx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28usb: dwc2: Fix IN FIFO allocationJohn Keeping1-1/+2
[ Upstream commit 644139f8b64d818f6345351455f14471510879a5 ] On chips with fewer FIFOs than endpoints (for example RK3288 which has 9 endpoints, but only 6 which are cabable of input), the DPTXFSIZN registers above the FIFO count may return invalid values. With logging added on startup, I see: dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=1 sz=256 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=2 sz=128 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=3 sz=128 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=4 sz=64 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=5 sz=64 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=6 sz=32 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=7 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=8 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=9 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=10 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=11 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=12 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=13 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=14 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=15 sz=0 but: # cat /sys/kernel/debug/ff580000.usb/fifo Non-periodic FIFOs: RXFIFO: Size 275 NPTXFIFO: Size 16, Start 0x00000113 Periodic TXFIFOs: DPTXFIFO 1: Size 256, Start 0x00000123 DPTXFIFO 2: Size 128, Start 0x00000223 DPTXFIFO 3: Size 128, Start 0x000002a3 DPTXFIFO 4: Size 64, Start 0x00000323 DPTXFIFO 5: Size 64, Start 0x00000363 DPTXFIFO 6: Size 32, Start 0x000003a3 DPTXFIFO 7: Size 0, Start 0x000003e3 DPTXFIFO 8: Size 0, Start 0x000003a3 DPTXFIFO 9: Size 256, Start 0x00000123 so it seems that FIFO 9 is mirroring FIFO 1. Fix the allocation by using the FIFO count instead of the endpoint count when selecting a FIFO for an endpoint. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27dwc2: gadget: Fix completed transfer size calculation in DDMAMinas Harutyunyan1-0/+1
[ Upstream commit 5acb4b970184d189d901192d075997c933b82260 ] Fix calculation of transfer size on completion in function dwc2_gadget_get_xfersize_ddma(). Added increment of descriptor pointer to move to next descriptor in the loop. Fixes: aa3e8bc81311 ("usb: dwc2: gadget: DDMA transfer start and complete") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-08-24dwc2: gadget: Fix ISOC IN DDMA PID bitfield value calculationMinas Harutyunyan1-1/+6
[ Upstream commit 1d8e5c00275825fc42aaa5597dab1d0b5b26bb64 ] PID bitfield in descriptor should be set based on particular request length, not based on EP's mc value. PID value can't be set to 0 even request length is 0. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24usb: gadget: dwc2: fix memory leak in gadget_init()Grigor Tovmasyan1-2/+5
[ Upstream commit 9bb073a053f0464ea74a4d4c331fdb7da58568d6 ] Freed allocated request for ep0 to prevent memory leak in case when dwc2_driver_probe() failed. Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24usb: dwc2: gadget: Fix issue in dwc2_gadget_start_isoc()Minas Harutyunyan1-0/+1
[ Upstream commit 1ffba9058737af2ddeebc813faa8ea9b16bc892a ] In case of requests queue is empty reset EP target_frame to initial value. This allow restarting ISOC traffic in case when function driver queued requests with interruptions. Tested-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-25usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()Vardan Mikayelyan1-6/+6
[ Upstream commit 755d739534f998d92e348fba8ffb0478416576e7 ] We should call dwc2_hsotg_enqueue_setup() after properly setting lx_state. Because it may cause error-out from dwc2_hsotg_enqueue_setup() due to wrong value in lx_state. Issue can be reproduced by loading driver while connected A-Connector (start in A-HOST mode) then disconnect A-Connector to switch to B-DEVICE. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-15usb: dwc2: gadget: make usb_ep_ops constBhumika Goyal1-1/+1
Make the structure const as it is only stored in the ops field of a usb_ep structure, which is of type const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-07-18usb: dwc2: gadget: On USB RESET reset device address to zeroMinas Harutyunyan1-0/+3
Reseted DEVADDR field in DCFG to zero on USB RESET. Device address in DCFG register does not reset to zero, which required to pass enumeration, after disconnect and reconnect. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-26Merge tag 'usb-for-v4.11' of ↵Greg Kroah-Hartman1-107/+206
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v4.11 Here's the big pull request for the Gadget API. Again the majority of changes sit in dwc2 driver. Most important changes contain a workaround for GOTGCTL being wrong, a sleep-inside-spinlock fix and the big series of cleanups on dwc2. One important thing on dwc3 is that we don't anymore need gadget drivers to cope with unaligned OUT transfers for us. We have support for appending one extra chained TRB to align transfer ourselves. Apart from these, the usual set of typos, non-critical fixes, etc.
2017-01-24usb: dwc2: gadget: Set TX FIFO depths to calculated defaultsSevak Arakelyan1-0/+93
Remove legacy DWC2_G_P_LEGACY_TX_FIFO_SIZE array for TX FIFOs. Update dwc2_set_param_tx_fifo_sizes function to calculate and assign default average FIFO depth to each member of g_tx_fifo_size array. Total FIFO size, EP Info block's size, FIFO operation mode and device operation mode are taken into consideration during the calculation. Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Avoid sleeping while holding hsotg->lockJohn Stultz1-1/+1
Basically when plugging in various cables in different orders, I'm occasionally seeing the following BUG splat: [ 86.215403] BUG: scheduling while atomic: kworker/u16:2/53/0x00000002 [ 86.219164] usb 1-1: USB disconnect, device number 9 [ 86.226845] Preemption disabled at:[ 86.230218] [<ffffff8008673558>] dwc2_conn_id_status_change+0x120/0x250 [ 86.236894] CPU: 0 PID: 53 Comm: kworker/u16:2 Tainted: G W 4.9.0-rc8-00051-gd5a7979-dirty #1702 [ 86.246836] Hardware name: HiKey Development Board (DT) [ 86.252100] Workqueue: dwc2 dwc2_conn_id_status_change [ 86.257279] Call trace: [ 86.259771] [<ffffff8008087c28>] dump_backtrace+0x0/0x1a0 [ 86.265210] [<ffffff8008087ddc>] show_stack+0x14/0x20 [ 86.270308] [<ffffff80084343f0>] dump_stack+0x90/0xb0 [ 86.275401] [<ffffff80080d8d94>] __schedule_bug+0x6c/0xb8 [ 86.280841] [<ffffff8008a07220>] __schedule+0x4f8/0x5b0 [ 86.286099] [<ffffff8008a073e8>] schedule+0x38/0xa0 [ 86.291017] [<ffffff8008a0a6cc>] schedule_hrtimeout_range_clock+0x8c/0xf0 [ 86.297846] [<ffffff8008a0a740>] schedule_hrtimeout_range+0x10/0x18 [ 86.304150] [<ffffff8008a0a4a0>] usleep_range+0x50/0x58 [ 86.309418] [<ffffff800866d8dc>] dwc2_wait_for_mode.isra.4+0x54/0xd0 [ 86.315815] [<ffffff800866f058>] dwc2_core_reset+0xe0/0x168 [ 86.321431] [<ffffff800867e364>] dwc2_hsotg_core_init_disconnected+0x2c/0x310 [ 86.328602] [<ffffff8008673568>] dwc2_conn_id_status_change+0x130/0x250 [ 86.335254] [<ffffff80080ccd48>] process_one_work+0x118/0x370 [ 86.341035] [<ffffff80080ccfe8>] worker_thread+0x48/0x498 [ 86.346473] [<ffffff80080d2eb0>] kthread+0xd0/0xe8 [ 86.351299] [<ffffff8008082e80>] ret_from_fork+0x10/0x50 This seems to be caused by the dwc2_wait_for_mode() calling usleep_range() while the hstog->lock spinlock is held, since we take that before calling dwc2_hsotg_core_init_disconnected(). This patch avoids the issue by adding an extra argument to dwc2_core_reset(), as suggested by John Youn, which allows us to skip the waiting, which should be unnecessary when calling from dwc2_hsotg_core_init_disconnected(). Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Fix usage of bool paramsJohn Youn1-1/+1
Check these parameters only for true or false. There is no need to check for greater or less than 0. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: gadget: Set GDFIFOCFGSevak Arakelyan1-0/+3
Add programming of GDFIFOCFG register in device mode. It must contain start address for EP Info block and total FIFO depth. Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Fix sizeof in kzallocJohn Youn1-1/+1
Take the sizeof '*req' instead of 'struct dwc2_hsotg_req'. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Fix code indentation after conditionalsJohn Youn1-3/+3
The indent should be only one tab. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Fix lines over 80 charactersJohn Youn1-5/+9
Fix lines over 80 characters. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Fix brace usageJohn Youn1-6/+4
* Remove braces for one-line statements * Add missing braces where another arm in if-statement uses braces Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Fix comment alignment and formatJohn Youn1-20/+23
Fix misaligned and over 80-character comments. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Cleanup some checkpatch issuesJohn Youn1-72/+70
This commmit is the result of running checkpatch --fix. The results were verified for correctness. Some of the fixes result in line over 80 char which we will fix manually later. The following is a summary of what was done by checkpatch: * Remove externs on function prototypes. * Replace symbolic permissions with octal. * Align code to open parens. * Replace 'unsigned' with 'unsigned int'. * Remove unneccessary blank lines. * Add blank lines after declarations. * Add spaces around operators. * Remove unnecessary spaces after casts. * Replace 'x == NULL' with '!x'. * Replace kzalloc() with kcalloc(). * Concatenate multi-line strings. * Use the BIT() macro. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-16usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM valueAmelie Delaunay1-2/+2
USBTrdTim must be programmed to 0x5 when phy has a UTMI+ 16-bit wide interface or 0x9 when it has a 8-bit wide interface. GUSBCFG reset value (Value After Reset: 0x1400) sets USBTrdTim to 0x5. In case of 8-bit UTMI+, without clearing GUSBCFG.USBTRDTIM mask, USBTrdTim results in 0xD (0x5 | 0x9). That's why we need to clear GUSBCFG.USBTRDTIM mask before setting USBTrdTim value, to ensure USBTrdTim is correctly set in case of 8-bit UTMI+. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-12usb: dwc2: gadget: Fix DMA memory freeingVardan Mikayelyan1-11/+3
Remove DMA memory free from EP disable flow by replacing dma_alloc_coherent with dmam_alloc_coherent. Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc2: fix flags for DMA descriptor allocation in dwc2_hsotg_ep_enableMarek Szyprowski1-1/+1
dwc2_hsotg_ep_enable can be called from interrupt context, so all allocations should be done with GFP_ATOMIC flags. This fixes following issue on ARM architecture: [<c010d830>] (unwind_backtrace) from [<c010a51c>] (show_stack+0x10/0x14) [<c010a51c>] (show_stack) from [<c032930c>] (dump_stack+0x74/0x94) [<c032930c>] (dump_stack) from [<c011cd30>] (__warn+0xd4/0x100) [<c011cd30>] (__warn) from [<c011cd7c>] (warn_slowpath_null+0x20/0x28) [<c011cd7c>] (warn_slowpath_null) from [<c0187e04>] (smp_call_function_many+0xcc/0x2a4) [<c0187e04>] (smp_call_function_many) from [<c0188014>] (on_each_cpu_mask+0x38/0xa8) [<c0188014>] (on_each_cpu_mask) from [<c01ddfe0>] (start_isolate_page_range+0x134/0x1b8) [<c01ddfe0>] (start_isolate_page_range) from [<c01a3c14>] (alloc_contig_range+0xac/0x2f8) [<c01a3c14>] (alloc_contig_range) from [<c01de3e4>] (cma_alloc+0xe0/0x1a8) [<c01de3e4>] (cma_alloc) from [<c0110acc>] (__alloc_from_contiguous+0x38/0xe0) [<c0110acc>] (__alloc_from_contiguous) from [<c0110ba4>] (cma_allocator_alloc+0x30/0x38) [<c0110ba4>] (cma_allocator_alloc) from [<c0111034>] (__dma_alloc+0x1c0/0x2c8) [<c0111034>] (__dma_alloc) from [<c01111b4>] (arm_dma_alloc+0x3c/0x48) [<c01111b4>] (arm_dma_alloc) from [<c04ad800>] (dwc2_hsotg_ep_enable+0xec/0x46c) [<c04ad800>] (dwc2_hsotg_ep_enable) from [<c04da610>] (usb_ep_enable+0x2c/0x3c) [<c04da610>] (usb_ep_enable) from [<c04dc0c0>] (ecm_set_alt+0xa8/0x154) [<c04dc0c0>] (ecm_set_alt) from [<c04d678c>] (composite_setup+0xd74/0x1540) [<c04d678c>] (composite_setup) from [<c04ae048>] (dwc2_hsotg_complete_setup+0xb8/0x370) [<c04ae048>] (dwc2_hsotg_complete_setup) from [<c04d987c>] (usb_gadget_giveback_request+0xc/0x10) [<c04d987c>] (usb_gadget_giveback_request) from [<c04acafc>] (dwc2_hsotg_complete_request+0x78/0x128) [<c04acafc>] (dwc2_hsotg_complete_request) from [<c04aed28>] (dwc2_hsotg_epint+0x69c/0x81c) [<c04aed28>] (dwc2_hsotg_epint) from [<c04af6c4>] (dwc2_hsotg_irq+0xfc/0x748) [<c04af6c4>] (dwc2_hsotg_irq) from [<c0163264>] (__handle_irq_event_percpu+0x58/0x140) [<c0163264>] (__handle_irq_event_percpu) from [<c0163368>] (handle_irq_event_percpu+0x1c/0x58) [<c0163368>] (handle_irq_event_percpu) from [<c01633dc>] (handle_irq_event+0x38/0x5c) [<c01633dc>] (handle_irq_event) from [<c01666e4>] (handle_fasteoi_irq+0xc4/0x19c) [<c01666e4>] (handle_fasteoi_irq) from [<c0162a2c>] (generic_handle_irq+0x18/0x28) [<c0162a2c>] (generic_handle_irq) from [<c0162b40>] (__handle_domain_irq+0x6c/0xe4) [<c0162b40>] (__handle_domain_irq) from [<c0101470>] (gic_handle_irq+0x50/0x9c) [<c0101470>] (gic_handle_irq) from [<c010b00c>] (__irq_svc+0x6c/0xa8) Fixes: 5f54c54b0ba83 ("usb: dwc2: gadget: Add DDMA chain pointers to dwc2_hsotg_ep structure") Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Remove unnecessary request length checkingRazmik Karapetyan1-10/+0
Remove request length checking from dwc2_hsotg_unmap_dma() and dwc2_hsotg_map_dma(). That checking is done in functions called from those functions, usb_gadget_unmap_request_by_dev() and usb_gadget_map_request_by_dev() respectively, so it's unnecessary. Signed-off-by: Razmik Karapetyan <razmik@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Fix Control Write issue in DMA modeRazmik Karapetyan1-0/+7
While sending zlp for DWC2_EP0_STATUS_IN EP direction was changed to IN. Change it back to complete OUT transfer request. This affects only on DMA mode, because DMA buffer map/unmap function is direction sensitive. Signed-off-by: Razmik Karapetyan <razmik@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Don't program DMA address for 0 length requestRazmik Karapetyan1-1/+1
Check the request length in dwc2_hsotg_start_req() function. If length == 0, do not write DMA address to control register. Signed-off-by: Razmik Karapetyan <razmik@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Add new core parameter for low speedVardan Mikayelyan1-6/+21
Added new core param for low speed, which can be used only when SNPSID is equal to DWC2_CORE_FS_IOT. When LS mode is enabled, we are restricting ep types and providing to upper layer only INTR and CTRL endpoints. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Program ep0_mps for LSVardan Mikayelyan1-0/+2
When device is enumerated in LS we should program ep0_mps accordingly. USB2 spec says that in LS mode, control ep mps must be 8. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Add support of dedicated full-speed PHY interfaceVahram Aharonyan1-5/+21
Do modifications in dwc2_hsotg_core_init_disconnected() function to enable USB 1.1 Full-Speed Serial Transceiver Select in GUSBCFG register if corresponding speed and PHY types are chosen. Adjust device speed selection in DCFG register as well. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Disable enabled HW endpoint in dwc2_hsotg_ep_disableVahram Aharonyan1-89/+93
Check if endpoint is enabled during dwc2_hsotg_ep_disable() function processing and call dwc2_hsotg_ep_stop_xfr() to disable it and flush associated FIFO. Move dwc2_hsotg_ep_stop_xfr() and dwc2_hsotg_wait_bit_set() functions upper before dwc2_hsotg_ep_enable and dwc2_hsotg_ep_disable function definitions. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Correct dwc2_hsotg_ep_stop_xfr() functionVahram Aharonyan1-23/+41
Correct dwc2_hsotg_ep_stop_xfr() function to follow dwc2 programming guide for setting NAK on specific endpoint, disabling it and flushing corresponding FIFO. Current code does not take into account whether core acts in shared or dedicated FIFO mode, current endpoint is periodic or not. It does not clear EPDISBLD interrupt after programming of DXEPCTL_EPDIS, does not flush shared TX FIFO and tries to clear global out NAK in wrong manner instead of setting DCTL_CGOUTNAK. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: For DDMA parse setup only after SetUp interruptVahram Aharonyan1-0/+10
Tests with various hosts show that depend on time difference between host sending SETUP packet and IN/OUT token SW could get Xfercomplete interrupt without SetUp interrupt. On the other hand, SW should parse received SETUP packet only after ensuring that Host has moved to either Data or Status stage of control transfer. For this purpose added checking in the dwc2_hsotg_epint() function to not handle xfercomplete and postpone SETUP packet analysis till SW's getting of setup phase done interrupt. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Adjust ISOC OUT request's actual len for DDMAVahram Aharonyan1-0/+4
In DDMA mode if programmed ISOC OUT transfer length is not DWORD aligned, after closing descriptor HW leaves value of 4 - (ureq->length % 4) in the RX bytes. This is caused because DMA works using 4B chunks. Example: if length = 9 and all 9 bytes were received from the bus, after xfercomplete rx_bytes value is 3. Hence add this value to the amount of transferred bytes. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Enable the BNA interruptVahram Aharonyan1-0/+4
Enable the BNA (Buffer Not Available) interrupt in descriptor DMA mode. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Start and complete DDMA isoc transfersVahram Aharonyan1-5/+304
For DDMA mode in case of isochronous transfers completion performed differently than other transfer types. This is because each usb request was mapped to one descriptor in the chain and SW gets xfercomplete interrupt on all descriptors. The endpoint remains enabled until HW processes last descriptor with "L" bit set or BNA interrupt gets asserted for IN and OUT endpoints correspondingly. Add function dwc2_gadget_complete_isoc_request_ddma() - completes one isochronous request taken from endpoint's queue. Add function dwc2_gadget_start_next_isoc_ddma() - tries to restart isochronous endpoint if requests are pending. Check for EPENA. If the endpoint was disabled, try to restart it after programming descriptor chain prepared by SW earlier, switch SW to fill the other half of chain. Add function dwc2_gadget_fill_isoc_desc() - initializes DMA descriptor for isochronous transfer based on the received request data and endpoint characteristics. Added function dwc2_gadget_start_isoc_ddma() - prepare DMA chain for isochronous transfer in DDMA, programs corresponding DMA address to DEPDMA, enables the endpoint. This function is called once SW decides to start isochronous IN or OUT transfer depend on reception of NAK or OUTTknEPdis interrupts indicating first isochronous token arrival from host. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: In DDMA keep incompISOOUT and incompISOIN maskedVahram Aharonyan1-2/+4
In DDMA mode incompISOOUT should be masked, similar as Bulk Out - XferCompl and BNA should be handled. incompISOIN is not valid in DDMA and is not getting asserted. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Add DDMA isoc related fields to dwc2_hsotg_epVahram Aharonyan1-0/+2
Preparing for isochronous transfers support adding in DDMA mode. In DDMA isochronous transfers are handled differently compared to Slave and BDMA modes. This is caused by fact that isoc requests contain data for one frame/microframe. HW descriptor should contain data of one frame/microframe as well. Hence each DMA descriptor in the chain will correspond to one usb request. Decided to divide endpoints descriptor chain to two halves - while one will be processed by HW, other one will be under SW control. First part will be passed to HW once ISOC traffic needs to be started. In parallel to HW's work SW will keep creating new entries in the other half of chain if new requests arrive in ep_queue routine. This will allow passing of already pre-prepared descriptors to HW immediately after endpoint gets disabled. The endpoint should be disabled once HW closes descriptor with "L" bit set. Afterwards SW will switch to use first part of chain if more requests are arriving. Add two members to the dwc2_hsotg_ep structure to be used in isochronous transfers' handling in DDMA mode: -isoc_chain_num - indicates which half of EP descriptor chain can be used by SW to add new queued requests while HW is processing other half. -next_desc - index which points to next not yet programmed descriptor in the half of descriptor chain which is under SW control. Also add initialization of these fields in function dwc2_hsotg_ep_enable(). Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Enable descriptor DMA modeVahram Aharonyan1-2/+8
Add DCFG register field macro for descriptor DMA mode and update core initialization routine to set that bit accordingly. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Start DDMA IN status phase in StsPhseRcvd handlerVahram Aharonyan1-2/+9
In DDMA mode of operation IN status phase of control write transfer should start after getting StsPhseRcvd interrupt. This interrupt is issued by HW once host starts to send IN tokens after data stage. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Fixes for StsPhseRcvd interruptVahram Aharonyan1-6/+7
The StsPhseRcvd interrupt should not be enabled in slave mode. Also move the StsPhsRcvd interrupt checking in the endpoint interrupt handler to the correct order according to the databook. The interrupt itself will be implemented in a later commit. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: DDMA transfer start and completeVahram Aharonyan1-13/+83
Update transfer starting dwc2_hsotg_start_req() routine with call of function dwc2_gadget_config_nonisoc_xfer_ddma() to fill descriptor chain. Add call of dwc2_gadget_get_xfersize_ddma() in dwc2_hsotg_handle_outdone() and dwc2_hsotg_complete_in() interrupt handlers for DDMA mode to get information on transferred data from descriptors instead of DXEPTSIZ. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: EP 0 specific DDMA programmingVahram Aharonyan1-5/+161
Add dwc2_gadget_set_ep0_desc_chain() function to switch between EP0 DDMA chains depend on the stage of control transfer. Include EP0 DDMA chain selection during ep_queue called from dwc2_hsotg_enqueue_setup() for setup stage. Selecting and filling DDMA chain for status phase as well - add calls of dwc2_gadget_set_ep0_desc_chain() and dwc2_gadget_config_nonisoc_xfer_ddma() functions. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Add DDMA chain pointers to dwc2_hsotg_ep structureVahram Aharonyan1-2/+31
Add DMA descriptor members to the dwc2_hsotg_ep structure. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Transfer length limit checking for DDMAVahram Aharonyan1-1/+31
Add dwc2_gadget_get_chain_limit() function and its call in transfer start routine to correctly estimate one go on transfer size if descriptor DMA mode is selected. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Add DMA descriptor chains for EP 0Vahram Aharonyan1-0/+54
Update dwc2_hsotg structure to add descriptor chains for EP 0: two DMA descriptors for Setup phase, per one for IN/OUT data and status phases. Add their allocation function dwc2_gadget_alloc_ctrl_desc_chains() and its call during gadget probe. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Add descriptor DMA parameterVahram Aharonyan1-0/+11
Add a parameter for descriptor DMA and set it based on hardware capabilities. This won't actually be used by the gadget until later, when the descriptor DMA code is in place. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: gadget: Update for new usb_endpoint_maxp()Vardan Mikayelyan1-19/+23
Update the dwc2 driver for the new behavior of the usb_endpoint_maxp() and also use the new usb_endpoint_maxp_mult() helper function. This commit fixes failures in high-badwith ISOC transfer tests. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Move gadget settings into core_paramsJohn Youn1-79/+14
Move the gadget devicetree settings into the core_params structure and document them. Then set and check them in params.c, with the addition of some helper functions, and remove the equivalent code in gadget.c. Because these parameters came from the standalone s3c driver, they have a fixed default value rather than an autodetected one. Preserve and document this behavior to avoid any compatibility issues. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Declare the core params struct staticallyJohn Youn1-1/+1
This makes it consistent with the hw_params struct and simplifies the memory management for future refactoring. Fix up usage in all files. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 11:06:54 +0300