summaryrefslogtreecommitdiff
path: root/drivers/usb/chipidea/udc.c
AgeCommit message (Collapse)AuthorFilesLines
2014-03-12usb: chipidea: udc: refine isr_tr_complete_handlerPeter Chen1-140/+154
Matthieu CASTET and Michael Grzeschik mentioned isr_tr_complete_handler is a bit messy at below: http://marc.info/?l=linux-usb&m=139047775001152&w=2 This commit creates a new function isr_setup_packet_handler to handle setup packet, it makes isr_tr_complete_handler easy to read. This is no functional change at this commit, tested with g_mass_storage and g_ether. Cc: Michael Grzeschik <mgr@pengutronix.de> Cc: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-25usb: chipidea: udc: refine ep operation at isr_tr_complete_handlerPeter Chen1-20/+8
- delete the warning message at interrupt handler, and adds judgement at ep_enable, if non-ep0 requests ctrl transfer, it will indicate an error. - delete hw_test_and_clear_setup_status which is a broken code - Tested with g_mass_storage, g_ncm, g_ether Cc: matthieu.castet@parrot.com Reported-by: Michael Grzeschik <mgr@pengutronix.de> Acked-by: Michael Grzeschik <mgr@pengutronix.de> Tested-by: Michael Grzeschik <mgr@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-25usb: chipidea: refine PHY operationPeter Chen1-6/+0
- Delete global_phy due to we can get the phy from phy layer now - using devm_usb_get_phy to instead of usb_get_phy - delete the otg_set_peripheral, which should be handled by otg layer Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22usb: chipidea: need to mask when writting endptflush and endptprimeMatthieu CASTET1-2/+2
ENDPTFLUSH and ENDPTPRIME registers are set by software and clear by hardware. There is a bit for each endpoint. When we are setting a bit for an endpoint we should make sure we do not touch other endpoint bit. There is a race condition if the hardware clear the bit between the read and the write in hw_write. Cc: stable <stable@vger.kernel.org> # 3.11+ Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Tested-by: Michael Grzeschik <mgrzeschik@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-14usb: chipidea: udc: using MultO at TD as real mult value for ISO-TXPeter Chen1-2/+17
We have met a bug that the high bandwidth ISO-TX transfer has failed at the last packet if it is less than 1024, the TD status shows it is "Transaction Error". The root cause of this problem is: the mult value at qh is not correct for current TD's transfer length. We use TD list to queue un-transfer TDs, and change mult for new adding TDs. If new adding TDs transfer length less than 1024, but the queued un-transfer TDs transfer length is larger than 1024, the transfer error will occur, and vice versa. Usually, this problem occurs at the last packet, and the first packet for new frame. We fixed this problem by setting Mult at QH as the largest value (3), and set MultO (Multiplier Override) at TD according to every transfer length. It can cover both hardware version less than 2.3 (the real mult is MultO if it is not 0) and 2.3+ (the real mult is min(qh.mult, td.multo)). Since the MultO bits are only existed at TX TD, we keep the ISO-RX behavior unchanged. For stable tree: 3.11+. Cc: stable <stable@vger.kernel.org> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reported-by: Matthieu Vanin <b47495@freescale.com> Tested-by: Matthieu Vanin <b47495@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-23Merge tag 'v3.13-rc5' into nextFelipe Balbi1-3/+0
Linux 3.13-rc5 * tag 'v3.13-rc5': (231 commits) Linux 3.13-rc5 aio: clean up and fix aio_setup_ring page mapping aio/migratepages: make aio migrate pages sane aio: fix kioctx leak introduced by "aio: Fix a trinity splat" Don't set the INITRD_COMPRESS environment variable automatically mm: fix build of split ptlock code pstore: Don't allow high traffic options on fragile devices mm: do not allocate page->ptl dynamically, if spinlock_t fits to long mm: page_alloc: revert NUMA aspect of fair allocation policy Revert "mm: page_alloc: exclude unreclaimable allocations from zone fairness policy" mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure target: Remove extra percpu_ref_init arm64: ptrace: avoid using HW_BREAKPOINT_EMPTY for disabled events ARC: Allow conditional multiple inclusion of uapi/asm/unistd.h target/file: Update hw_max_sectors based on current block_size iser-target: Move INIT_WORK setup into isert_create_device_ib_res iscsi-target: Fix incorrect np->np_thread NULL assignment mm/hugetlb: check for pte NULL pointer in __page_check_address() fix build with make 3.80 ... Conflicts: drivers/usb/phy/Kconfig
2013-12-17usb: gadget: add "maxpacket_limit" field to struct usb_epRobert Baldyga1-2/+2
This patch adds "maxpacket_limit" to struct usb_ep. This field contains maximum value of maxpacket supported by driver, and is set in driver probe. This value should be used by autoconfig() function, because value of field "maxpacket" is set to value from endpoint descriptor when endpoint becomes enabled. So when autoconfig() function will be called again for this endpoint, "maxpacket" value will contain wMaxPacketSize from descriptior instead of maximum packet size for this endpoint. For this reason this patch adds new field "maxpacket_limit" which contains value of maximum packet size (which defines maximum endpoint capabilities). This value is used in ep_matches() function used by autoconfig(). Value of "maxpacket_limit" should be set in UDC driver probe function, using usb_ep_set_maxpacket_limit() function, defined in gadget.h. This function set choosen value to both "maxpacket_limit" and "maxpacket" fields. This patch modifies UDC drivers by adding support for maxpacket_limit. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-10usb: chipidea: fix nobody cared IRQ when booting with host rolePeter Chen1-3/+0
If we connect Male-A-To-Male-A cable between otg-host and host pc, the ci->vbus_active is set wrongly, and cause the controller run at peripheral mode when we load gadget module (ci_udc_start will be run), but the software runs at host mode due to id = 0. The ehci_irq can't handle suspend (USBi_SLI) interrupt which is enabled for peripheral mode, it causes no one will handle irq error. This patch is needed for 3.12 stable Cc: stable <stable@vger.kernel.org> Acked-by: Michael Grzeschik <mgr@pengutronix.de> Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-12usb: chipidea: udc: Fix calling spin_lock_irqsave at sleep contextPeter Chen1-4/+3
Fixing the below dump: root@freescale ~$ modprobe g_serial g_serial gadget: Gadget Serial v2.4 g_serial gadget: g_serial ready BUG: sleeping function called from invalid context at /home/b29397/work/projects/upstream/usb/usb/drivers/base/power/runtime.c:952 in_atomic(): 1, irqs_disabled(): 128, pid: 805, name: modprobe 2 locks held by modprobe/805: #0: (udc_lock){+.+.+.}, at: [<7f000a74>] usb_gadget_probe_driver+0x44/0xb4 [udc_core] #1: (&(&ci->lock)->rlock){......}, at: [<7f033488>] ci_udc_start+0x94/0x110 [ci_hdrc] irq event stamp: 3878 hardirqs last enabled at (3877): [<806b6720>] _raw_spin_unlock_irqrestore+0x40/0x6c hardirqs last disabled at (3878): [<806b6474>] _raw_spin_lock_irqsave+0x2c/0xa8 softirqs last enabled at (3872): [<8002ec0c>] __do_softirq+0x1c8/0x2e8 softirqs last disabled at (3857): [<8002f180>] irq_exit+0xbc/0x110 CPU: 0 PID: 805 Comm: modprobe Not tainted 3.11.0-next-20130910+ #85 [<80016b94>] (unwind_backtrace+0x0/0xf8) from [<80012e0c>] (show_stack+0x20/0x24) [<80012e0c>] (show_stack+0x20/0x24) from [<806af554>] (dump_stack+0x9c/0xc4) [<806af554>] (dump_stack+0x9c/0xc4) from [<8005940c>] (__might_sleep+0xf4/0x134) [<8005940c>] (__might_sleep+0xf4/0x134) from [<803a04a4>] (__pm_runtime_resume+0x94/0xa0) [<803a04a4>] (__pm_runtime_resume+0x94/0xa0) from [<7f0334a4>] (ci_udc_start+0xb0/0x110 [ci_hdrc]) [<7f0334a4>] (ci_udc_start+0xb0/0x110 [ci_hdrc]) from [<7f0009b4>] (udc_bind_to_driver+0x5c/0xd8 [udc_core]) [<7f0009b4>] (udc_bind_to_driver+0x5c/0xd8 [udc_core]) from [<7f000ab0>] (usb_gadget_probe_driver+0x80/0xb4 [udc_core]) [<7f000ab0>] (usb_gadget_probe_driver+0x80/0xb4 [udc_core]) from [<7f008618>] (usb_composite_probe+0xac/0xd8 [libcomposite]) [<7f008618>] (usb_composite_probe+0xac/0xd8 [libcomposite]) from [<7f04b168>] (init+0x8c/0xb4 [g_serial]) [<7f04b168>] (init+0x8c/0xb4 [g_serial]) from [<800088e8>] (do_one_initcall+0x108/0x16c) [<800088e8>] (do_one_initcall+0x108/0x16c) from [<8008e518>] (load_module+0x1b00/0x20a4) [<8008e518>] (load_module+0x1b00/0x20a4) from [<8008eba8>] (SyS_init_module+0xec/0x100) [<8008eba8>] (SyS_init_module+0xec/0x100) from [<8000ec40>] (ret_fast_syscall+0x0/0x48) Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-12usb: chipidea: udc: Fix spinlock recursion during bus resetPeter Chen1-1/+1
After configuration, the host also possible sends bus reset at any time, at such situation, it will trigger below spinlock recursion dump. This commit unlocks the spinlock before calling gadget's disconnect. BUG: spinlock recursion on CPU#0, swapper/0/0 lock: 0xbf128014, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-next-20130910+ #106 [<80014e20>] (unwind_backtrace+0x0/0xec) from [<80011a6c>] (show_stack+0x10/0x14) [<80011a6c>] (show_stack+0x10/0x14) from [<805c143c>] (dump_stack+0x94/0xbc) [<805c143c>] (dump_stack+0x94/0xbc) from [<80282cf8>] (do_raw_spin_lock+0x16c/0x18c) [<80282cf8>] (do_raw_spin_lock+0x16c/0x18c) from [<805c77e0>] (_raw_spin_lock_irqsave+0x50/0x5c) [<805c77e0>] (_raw_spin_lock_irqsave+0x50/0x5c) from [<803cff88>] (ep_disable+0x24/0x110) [<803cff88>] (ep_disable+0x24/0x110) from [<7f015d50>] (gserial_disconnect+0xa0/0x15c [u_serial]) [<7f015d50>] (gserial_disconnect+0xa0/0x15c [u_serial]) from [<7f01c06c>] (acm_disable+0xc/0x30 [usb_f_acm]) [<7f01c06c>] (acm_disable+0xc/0x30 [usb_f_acm]) from [<7f001478>] (reset_config.isra.10+0x34/0x5c [libcomposite]) [<7f001478>] (reset_config.isra.10+0x34/0x5c [libcomposite]) from [<7f0014d4>] (composite_disconnect+0x34/0x5c [libcomposite]) [<7f0014d4>] (composite_disconnect+0x34/0x5c [libcomposite]) from [<803d1024>] (udc_irq+0x770/0xce4) [<803d1024>] (udc_irq+0x770/0xce4) from [<803cdcc0>] (ci_irq+0x98/0x164) [<803cdcc0>] (ci_irq+0x98/0x164) from [<8007edfc>] (handle_irq_event_percpu+0x50/0x17c) [<8007edfc>] (handle_irq_event_percpu+0x50/0x17c) from [<8007ef64>] (handle_irq_event+0x3c/0x5c) [<8007ef64>] (handle_irq_event+0x3c/0x5c) from [<80081e98>] (handle_fasteoi_irq+0x98/0x168) [<80081e98>] (handle_fasteoi_irq+0x98/0x168) from [<8007e598>] (generic_handle_irq+0x28/0x3c) [<8007e598>] (generic_handle_irq+0x28/0x3c) from [<8000edf4>] (handle_IRQ+0x4c/0xb4) [<8000edf4>] (handle_IRQ+0x4c/0xb4) from [<800085bc>] (gic_handle_irq+0x28/0x5c) [<800085bc>] (gic_handle_irq+0x28/0x5c) from [<800125c0>] (__irq_svc+0x40/0x54) Exception stack(0x8083bf68 to 0x8083bfb0) bf60: 81533b80 00000000 00096234 8001d760 8088e12c 00000000 bf80: 8083a000 8083a000 8084290c 805cb414 808428ac 8083a000 00000001 8083bfb0 bfa0: 8000f138 8000f13c 60000013 ffffffff [<800125c0>] (__irq_svc+0x40/0x54) from [<8000f13c>] (arch_cpu_idle+0x30/0x3c) [<8000f13c>] (arch_cpu_idle+0x30/0x3c) from [<8005eb94>] (cpu_startup_entry+0xf4/0x148) [<8005eb94>] (cpu_startup_entry+0xf4/0x148) from [<807f1a2c>] (start_kernel+0x2c4/0x318) BUG: spinlock lockup suspected on CPU#0, swapper/0/0 lock: 0xbf128014, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-next-20130910+ #106 [<80014e20>] (unwind_backtrace+0x0/0xec) from [<80011a6c>] (show_stack+0x10/0x14) [<80011a6c>] (show_stack+0x10/0x14) from [<805c143c>] (dump_stack+0x94/0xbc) [<805c143c>] (dump_stack+0x94/0xbc) from [<80282c94>] (do_raw_spin_lock+0x108/0x18c) [<80282c94>] (do_raw_spin_lock+0x108/0x18c) from [<805c77e0>] (_raw_spin_lock_irqsave+0x50/0x5c) [<805c77e0>] (_raw_spin_lock_irqsave+0x50/0x5c) from [<803cff88>] (ep_disable+0x24/0x110) [<803cff88>] (ep_disable+0x24/0x110) from [<7f015d50>] (gserial_disconnect+0xa0/0x15c [u_serial]) [<7f015d50>] (gserial_disconnect+0xa0/0x15c [u_serial]) from [<7f01c06c>] (acm_disable+0xc/0x30 [usb_f_acm]) [<7f01c06c>] (acm_disable+0xc/0x30 [usb_f_acm]) from [<7f001478>] (reset_config.isra.10+0x34/0x5c [libcomposite]) [<7f001478>] (reset_config.isra.10+0x34/0x5c [libcomposite]) from [<7f0014d4>] (composite_disconnect+0x34/0x5c [libcomposite]) [<7f0014d4>] (composite_disconnect+0x34/0x5c [libcomposite]) from [<803d1024>] (udc_irq+0x770/0xce4) [<803d1024>] (udc_irq+0x770/0xce4) from [<803cdcc0>] (ci_irq+0x98/0x164) [<803cdcc0>] (ci_irq+0x98/0x164) from [<8007edfc>] (handle_irq_event_percpu+0x50/0x17c) [<8007edfc>] (handle_irq_event_percpu+0x50/0x17c) from [<8007ef64>] (handle_irq_event+0x3c/0x5c) [<8007ef64>] (handle_irq_event+0x3c/0x5c) from [<80081e98>] (handle_fasteoi_irq+0x98/0x168) [<80081e98>] (handle_fasteoi_irq+0x98/0x168) from [<8007e598>] (generic_handle_irq+0x28/0x3c) [<8007e598>] (generic_handle_irq+0x28/0x3c) from [<8000edf4>] (handle_IRQ+0x4c/0xb4) [<8000edf4>] (handle_IRQ+0x4c/0xb4) from [<800085bc>] (gic_handle_irq+0x28/0x5c) [<800085bc>] (gic_handle_irq+0x28/0x5c) from [<800125c0>] (__irq_svc+0x40/0x54) Exception stack(0x8083bf68 to 0x8083bfb0) bf60: 81533b80 00000000 00096234 8001d760 8088e12c 00000000 bf80: 8083a000 8083a000 8084290c 805cb414 808428ac 8083a000 00000001 8083bfb0 bfa0: 8000f138 8000f13c 60000013 ffffffff [<800125c0>] (__irq_svc+0x40/0x54) from [<8000f13c>] (arch_cpu_idle+0x30/0x3c) [<8000f13c>] (arch_cpu_idle+0x30/0x3c) from [<8005eb94>] (cpu_startup_entry+0xf4/0x148) [<8005eb94>] (cpu_startup_entry+0xf4/0x148) from [<807f1a2c>] (start_kernel+0x2c4/0x318) Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-01usb: chipidea: move PHY operation to corePeter Chen1-38/+1
PHY operations are common, so move them to core. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-30Merge 3.12-rc3 into usb-nextGreg Kroah-Hartman1-1/+1
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26usb: chipidea: udc: free pending TD at removal procedurePeter Chen1-0/+2
There is a pending TD which is not freed after request finishes, we do this due to a controller bug. This TD needs to be freed when the driver is removed. It prints below error message when unload chipidea driver at current code: "ci_hdrc ci_hdrc.0: dma_pool_destroy ci_hw_td, b0001000 busy" It indicates the buffer at dma pool are still in use. This commit will free the pending TD at driver's removal procedure, it can fix the problem described above. Acked-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26usb: chipidea: udc: fix the oops after rmmod gadgetPeter Chen1-1/+1
When we rmmod gadget, the ci->driver needs to be cleared. Otherwise, when we plug in usb cable again, the driver will consider gadget is there, and go to enumeration procedure, but in fact, it was removed. ci_hdrc ci_hdrc.0: Connected to host Unable to handle kernel paging request at virtual address 7f02a42c pgd = 80004000 [7f02a42c] *pgd=3f13d811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] SMP ARM Modules linked in: usb_f_acm u_serial libcomposite configfs [last unloaded: g_serial] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0+ #42 task: 807dba88 ti: 807d0000 task.ti: 807d0000 PC is at udc_irq+0x8fc/0xea4 LR is at l2x0_cache_sync+0x5c/0x6c pc : [<803de7f4>] lr : [<8001d0f0>] psr: 20000193 sp : 807d1d98 ip : 807d1d80 fp : 807d1df4 r10: af809900 r9 : 808184d4 r8 : 00080001 r7 : 00082001 r6 : afb711f8 r5 : afb71010 r4 : ffffffea r3 : 7f02a41c r2 : afb71010 r1 : 807d1dc0 r0 : afb71068 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 3f01804a DAC: 00000017 Process swapper/0 (pid: 0, stack limit = 0x807d0238) Stack: (0x807d1d98 to 0x807d2000) 1d80: 00000000 afb71014 1da0: 000040f6 00000000 00000001 00000000 00007530 00000000 afb71010 001dcd65 1dc0: 01000680 00400000 807d1e2c afb71010 0000004e 00000000 00000000 0000004b 1de0: 808184d4 af809900 807d1e0c 807d1df8 803dbc24 803ddf04 afba75c0 0000004e 1e00: 807d1e44 807d1e10 8007a19c 803dbb9c 8108e7e0 8108e7e0 9ceddce0 af809900 1e20: 0000004e 807d0000 0000004b 00000000 00000010 00000000 807d1e5c 807d1e48 1e40: 8007a334 8007a154 af809900 0000004e 807d1e74 807d1e60 8007d3b4 8007a2f0 1e60: 0000004b 807cce3c 807d1e8c 807d1e78 80079b08 8007d300 00000180 807d8ba0 1e80: 807d1eb4 807d1e90 8000eef4 80079aec 00000000 f400010c 807d8ce4 807d1ed8 1ea0: f4000100 96d5c75d 807d1ed4 807d1eb8 80008600 8000eeac 8042699c 60000013 1ec0: ffffffff 807d1f0c 807d1f54 807d1ed8 8000e180 800085dc 807d1f20 00000046 1ee0: 9cedd275 00000010 8108f080 807de294 00000001 807de248 96d5c75d 00000010 1f00: 00000000 807d1f54 00000000 807d1f20 8005ff54 8042699c 60000013 ffffffff 1f20: 9cedd275 00000010 00000005 8108f080 8108f080 00000001 807de248 8086bd00 1f40: 807d0000 00000001 807d1f7c 807d1f58 80426af0 80426950 807d0000 00000000 1f60: 808184c0 808184c0 807d8954 805b886c 807d1f8c 807d1f80 8000f294 80426a44 1f80: 807d1fac 807d1f90 8005f110 8000f288 807d1fac 807d8908 805b4748 807dc86c 1fa0: 807d1fbc 807d1fb0 805aa58c 8005f068 807d1ff4 807d1fc0 8077c860 805aa530 1fc0: ffffffff ffffffff 8077c330 00000000 00000000 807bef88 00000000 10c53c7d 1fe0: 807d88d0 807bef84 00000000 807d1ff8 10008074 8077c594 00000000 00000000 Backtrace: [<803ddef8>] (udc_irq+0x0/0xea4) from [<803dbc24>] (ci_irq+0x94/0x14c) [<803dbb90>] (ci_irq+0x0/0x14c) from [<8007a19c>] (handle_irq_event_percpu+0x54/0x19c) r5:0000004e r4:afba75c0 [<8007a148>] (handle_irq_event_percpu+0x0/0x19c) from [<8007a334>] (handle_irq_event+0x50/0x70) [<8007a2e4>] (handle_irq_event+0x0/0x70) from [<8007d3b4>] (handle_fasteoi_irq+0xc0/0x16c) r5:0000004e r4:af809900 [<8007d2f4>] (handle_fasteoi_irq+0x0/0x16c) from [<80079b08>] (generic_handle_irq+0x28/0x38) r5:807cce3c r4:0000004b [<80079ae0>] (generic_handle_irq+0x0/0x38) from [<8000eef4>] (handle_IRQ+0x54/0xb4) r4:807d8ba0 r3:00000180 [<8000eea0>] (handle_IRQ+0x0/0xb4) from [<80008600>] (gic_handle_irq+0x30/0x64) r8:96d5c75d r7:f4000100 r6:807d1ed8 r5:807d8ce4 r4:f400010c r3:00000000 [<800085d0>] (gic_handle_irq+0x0/0x64) from [<8000e180>] (__irq_svc+0x40/0x54) Exception stack(0x807d1ed8 to 0x807d1f20) 1ec0: 807d1f20 00000046 1ee0: 9cedd275 00000010 8108f080 807de294 00000001 807de248 96d5c75d 00000010 1f00: 00000000 807d1f54 00000000 807d1f20 8005ff54 8042699c 60000013 ffffffff r7:807d1f0c r6:ffffffff r5:60000013 r4:8042699c [<80426944>] (cpuidle_enter_state+0x0/0xf4) from [<80426af0>] (cpuidle_idle_call+0xb8/0x174) r9:00000001 r8:807d0000 r7:8086bd00 r6:807de248 r5:00000001 r4:8108f080 [<80426a38>] (cpuidle_idle_call+0x0/0x174) from [<8000f294>] (arch_cpu_idle+0x18/0x5c) [<8000f27c>] (arch_cpu_idle+0x0/0x5c) from [<8005f110>] (cpu_startup_entry+0xb4/0x148) [<8005f05c>] (cpu_startup_entry+0x0/0x148) from [<805aa58c>] (rest_init+0x68/0x80) r7:807dc86c [<805aa524>] (rest_init+0x0/0x80) from [<8077c860>] (start_kernel+0x2d8/0x334) [<8077c588>] (start_kernel+0x0/0x334) from [<10008074>] (0x10008074) Code: e59031e0 e51b203c e24b1034 e2820058 (e5933010) ---[ end trace f874b2c5533c04bc ]--- Kernel panic - not syncing: Fatal exception in interrupt Tested-by: Marek Vasut <marex@denx.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26usb: chipidea: udc: Consolidate the call of disconnectPeter Chen1-3/+7
The udc-core will call gadget's driver->disconnect, so we should avoid calling gadget's disconnect again at ci_udc_stop in case the gadget's unbind free some structs which is still used at gadget's disconnect. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26chipidea: udc: free pending TD at removal procedurePeter Chen1-0/+2
There is a pending TD which is not freed after request finishes, we do this due to a controller bug. This TD needs to be freed when the driver is removed. It prints below error message when unload chipidea driver at current code: "ci_hdrc ci_hdrc.0: dma_pool_destroy ci_hw_td, b0001000 busy" It indicates the buffer at dma pool are still in use. This commit will free the pending TD at driver's removal procedure, it can fix the problem described above. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14usb: chipidea: udc: .pullup is valid only when vbus is therePeter Chen1-0/+3
For chipidea, the IP must know vbus before the controller begins to run. So the .pullup should only be called when the vbus is there. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14usb: chipidea: retire flag CI_HDRC_PULLUP_ON_VBUSPeter Chen1-18/+6
Currently, the controller only runs when the ci->vbus_active is true. So the flag CI_HDRC_PULLUP_ON_VBUS is useless no longer. If the user doesn't have otgsc, he/she needs to change ci_handle_vbus_change to update ci->vbus_active. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14usb: chipidea: udc: fix misuse of REGS_SHARED and PULLUP_ON_VBUS flagsPeter Chen1-3/+2
CI_HDRC_REGS_SHARED stands for the controller registers is shared with other USB drivers, if all USB drivers are at chipidea/, it doesn't needed to be set. CI_HDRC_PULLUP_ON_VBUS stands for pullup dp when the vbus is on. This flag doesn't need to be set if the vbus is always on for gadget since dp has always pulled up after the gadget has initialized. So, the current code seems to misuse this two flags. - When the gadget initializes, the controller doesn't need to run if it depends on vbus (CI_HDRC_PULLUP_ON_VBUS), it does not relate to shared register. - When the gadget starts (load one gadget module), the controller can run if vbus is on (CI_HDRC_PULLUP_ON_VBUS), it also does not relate to shared register. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14usb: chipidea: add vbus interrupt handlerPeter Chen1-0/+7
We add vbus interrupt handler at ci_otg_work, it uses OTGSC_BSV(at otgsc) to know it is connect or disconnet event. Meanwhile, we introduce two flags id_event and b_sess_valid_event to indicate it is an id interrupt or a vbus interrupt. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14usb: chipidea: add role init and destroy APIsPeter Chen1-9/+27
- The role's init will be called at probe procedure. - The role's destroy will be called at fail patch at probe and driver's removal. - The role's start/stop will be called when specific role has started. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14usb: chipidea: udc: otg_set_peripheral is useless for some chipidea usersPeter Chen1-1/+6
It is useless at below cases: - If we implement both usb host and device at chipidea driver. - If we don't need phy->otg. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-25usb: chipidea: drop "13xxx" infixAlexander Shishkin1-109/+108
"ci13xxx" is bad for at least the following reasons: * people often mistype it * it doesn't add any informational value to the names it's used in * it needlessly attracts mail filters This patch replaces it with "ci_hdrc", "ci_udc" or "ci_hw", depending on the situation. Modules with ci13xxx prefix are also renamed accordingly and aliases are added for compatibility. Otherwise, no functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18usb: chipidea: get rid of camelcase namesAlexander Shishkin1-251/+252
Since someone has added camelcase detection to checkpatch.pl, chipidea udc patches have been very noisy. To make everybody's life easier, this patch changes camelcase names into something more appropriate to the coding style. No functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18usb: chipidea: udc: add multiple td support to hardware_{en,de}queueMichael Grzeschik1-82/+110
This patch removes the restriction of having a limited amount of only four active tds on one endpoint. We use the linked list implementation to manage all tds which get added and removed by hardware_{en,de}queue. The removal of this restriction adds the driver to run into a hardware errata. It's possible that the hardware will still address an transfer descriptor that already got cleaned up. To solve this the patch also postpone the cleanup of processed tds by one. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18usb: chipidea: udc: manage dynamic amount of tds with a linked listMichael Grzeschik1-51/+110
Instead of having a limited number of usable tds in the udc we use a linked list to support dynamic amount of needed tds for all special gadget types. This improves throughput. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-18usb: chipidea: udc: configure iso endpointsMichael Grzeschik1-1/+19
This patch adds iso endpoint support to the device controller. It makes use of the multiplication bits in the maxpacket field of the endpoint and calculates the multiplier bits for each transfer description on every request. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-12usb: chipidea: fix no transceiver caseAlexander Shishkin1-5/+8
Since usb phy code does return ERR_PTR() values, make sure that we don't end up dereferencing them. This is a problem, for example, on platforms that don't register a phy for chipidea since b7fa5c2a ("usb: phy: return -ENXIO when PHY layer isn't enabled"). Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-06Merge tag 'usb-for-v3.10' of ↵Greg Kroah-Hartman1-26/+1
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.10 merge window Here is the big Gadget & PHY pull request. Many of us have been really busy lately getting multiple drivers to a better position. Since this pull request is so large, I will divide it in sections so it's easier to grasp what's included. - cleanups: . UDC drivers no longer touch gadget->dev, that's now udc-core responsibility . Many more UDC drivers converted to usb_gadget_map/unmap_request() . UDC drivers no longer initialize DMA-related fields from gadget's device structure . UDC drivers don't touch gadget.dev.driver directly . UDC drivers don't assign gadget.dev.release directly . Removal of some unused DMA_ADDR_INVALID . Introduction of CONFIG_USB_PHY . All phy drivers have been moved to drivers/usb/phy and renamed to a common naming scheme . Fix PHY layer so it never returns a NULL pointer, also fix all callers to avoid using IS_ERR_OR_NULL() . Sparse fixes all over the place . drivers/usb/otg/ has been deleted . Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock usage - new features: . UDC core now provides a generic way for tracking and reporting UDC's state (not attached, resuming, suspended, addressed, default, etc) . twl4030-usb learned that it shouldn't be enabled during init . Full DT support for DWC3 has been implemented . ab8500-usb learned about pinctrl framework . nop PHY learned about DeviceTree and regulators . DWC3 learned about suspend/resume . DWC3 can now be compiled in host-only and gadget-only (as well as DRD) configurations . UVC now enables streaming endpoint based on negotiated speed . isp1301 now implements the PHY API properly . configfs-based interface for gadget drivers which will lead to the removal of all code which just combines functions together to build functional gadget drivers. . f_serial and f_obex were converted to new configfs interface while maintaining old interface around. - non-critical fixes: . UVC gadget driver got fixes for Endpoint usage and stream calculation . ab8500-usb fixed unbalanced clock and regulator API usage . twl4030-usb got a fix for when OMAP3 is booted with cable connected . fusb300_udc got a fix for DMA usage . UVC got fixes for two assertions of the USB Video Class Compliance specification revision 1.1 . build warning issues caused by recent addition of __must_check to regulator API These are all changes which deserve a mention, all other changes are related to these one or minor spelling fixes and other similar tasks. Signed-of-by: Felipe Balbi <balbi@ti.com>
2013-04-06usb: chipidea: udc: fix memory leak in _ep_nukeMichael Grzeschik1-0/+6
In hardware_enqueue code adds one extra td with dma_pool_alloc if mReq->req.zero is true. When _ep_nuke will be called for that endpoint, dma_pool_free will not be called to free that memory again. That patch fixes this. Cc: stable <stable@vger.kernel.org> # v3.5 Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-06usb: chipidea: udc: fix memory access of shared memory on armv5 machinesMichael Grzeschik1-0/+2
The udc uses an shared dma memory space between hard and software. This memory layout is described in ci13xxx_qh and ci13xxx_td which are marked with the attribute ((packed)). The compiler currently does not know about the alignment of the memory layout, and will create strb and ldrb operations. The Datasheet of the synopsys core describes, that some operations on the mapped memory need to be atomic double word operations. I.e. the next pointer addressing in the qhead, as otherwise the hardware will read wrong data and totally stuck. This is also possible while working with the current active td queue, and preparing the td->ptr.next in software while the hardware is still working with the current active td which is supposed to be changed: writeb(0xde, &td->ptr.next + 0x0); /* strb */ writeb(0xad, &td->ptr.next + 0x1); /* strb */ <----- hardware reads value of td->ptr.next and get stuck! writeb(0xbe, &td->ptr.next + 0x2); /* strb */ writeb(0xef, &td->ptr.next + 0x3); /* strb */ This appeares on armv5 machines where the hardware does not support unaligned 32bit operations. This patch adds the attribute ((aligned(4))) to the structures to tell the compiler to use 32bit operations. It also adds an wmb() for the prepared TD data before it gets enqueued into the qhead. Cc: stable <stable@vger.kernel.org> # v3.5 Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: add the define TD_PAGE_COUNT and fix all usersMichael Grzeschik1-2/+2
A static count of transfer descriptors was used everywhere in the driver with the fixed number 5. This patch adds a define, named TD_PAGE_COUNT, and replaces all users of this value. This way its possible to have only one parameter to change and limit the amount of buffer pointers per TD. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: move _ep_queue into an unlocked functionMichael Grzeschik1-48/+56
There is no need to call ep_queue unlocked inside the own driver. We move its functionionality into an unlocked version. This patch removes potential unlocked timeslots inside isr_setup_status_phase and isr_get_status_response, in which the lock got released just before acquired again inside usb_ep_queue. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: don't truncate requests to single tdsMichael Grzeschik1-2/+2
It is not safe to truncate requests to the maximum possible size the controller can handle with one td and to keep working. That patch fixes that with proper error handling instead. Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: read status of td only once in hardware_dequeueMichael Grzeschik1-3/+5
This patch changes the read of the td status to one atomic operation to analyse coherent bits. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> [Alex: fixed backwards endianness conversion] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: move ZLT flag change to ep_enableMichael Grzeschik1-1/+2
Its not necessary and also not specified in the datasheet to change the ZLT flag before every ep_prime. This patch moves this to the ep_enable and applies it only for non configuration endpoints. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: rework ep_enable cap settingMichael Grzeschik1-9/+5
This patch reworks the cap value from several read and write operations to one single operation. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> [Alex: removed useless isoc-related bit of code] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: udc: only clear active and halted bits in qheadMichael Grzeschik1-1/+2
The datasheet of the synopsys core describes only to overwrite the active and halted bits in the qhead before priming any endpoint. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> [Alex: fixed a case of line-too-long] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: big-endian supportSvetoslav Neykov1-28/+31
Convert between big-endian and little-endian format when accessing the usb controller structures which are little-endian by specification. Fix cases where the little-endian memory layout is taken for granted. The patch doesn't have any effect on the already supported little-endian architectures. Signed-off-by: Svetoslav Neykov <svetoslav@neykov.name> [Alex: minor cosmetic fixes] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: don't redefine __ffs()Felipe Balbi1-6/+6
chipidea's ffs_nr() is pretty much what __ffs() does. Use that one instead. Signed-off-by: Felipe Balbi <balbi@ti.com> [rebased on top of debug infrastructure rework] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: move debug files creation/removal to the coreAlexander Shishkin1-8/+1
Create and remove debugfs entries in hdrc probe/remove instead of start/stop of the device controller. Gadget specific will not export anything while the controller is in host mode. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: convert debug entries in sysfs to debugfsAlexander Shishkin1-3/+3
Currently, we have a bunch of files in sysfs that display all sorts of debugging information for the device controller, so they have to move to debugfs where they belong. The "registers" interface have been removed, since it doesn't fit into the current driver design as is and it's hardly a good idea to touch the registers from userspace anyway. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: remove home-grown tracing facilityAlexander Shishkin1-32/+1
As part of the legacy from the original driver design, we retain home-grown tracing infrastructure, complete with own ring buffer and timestamps, which among other things has a performance penalty. This patch removes it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30Revert "USB: chipidea: add vbus detect for udc"Peter Chen1-38/+1
There are several problems with this patch: + in introduces a sparse warning for a condition that's always negative, + and because of that, it actually doesn't do anything useful, + and vbus detection belongs to otg, not device function anyway. This reverts commit 8c4fc031954b4eb72daf13d3c907a985a3eee208. Signed-off-by: Peter Chen <peter.chen@freescale.com> [Alex: amended the above text] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30usb: chipidea: trim include list in udc codeAlexander Shishkin1-7/+1
Some headers included in udc core code are not actually needed, remove them and add irqreturn.h, which was implicitly included via irq.h. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-18usb: chipidea: udc: don't assign gadget.dev.release directlyFelipe Balbi1-12/+0
udc-core provides a better way to handle release methods, let's use it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: chipidea: remove unnecessary initializationsFelipe Balbi1-3/+0
udc-core now sets dma-related and parent fields for us, we don't need to do it ourselves. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: drop now unnecessary flagFelipe Balbi1-1/+0
We don't need the ->register_my_device flag anymore because all UDC drivers have been properly converted. Let's remove every history of it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: chipidea: let udc-core manage gadget->devFelipe Balbi1-11/+2
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-04usb: chipidea: register debugging sysfs on our deviceFelipe Balbi1-3/+3
Don't register anything non-generic under the gadget's device as we don't really *own* it. Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 10:38:12 +0300