summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2022-06-30serial: 8250_dw: Use dw8250_serial_out() in dw8250_serial_out38x()Ilpo Järvinen1-12/+6
Place dw8250_serial_out() before dw8250_serial_out38x() so that it can be called from dw8250_serial_out38x() to do the actual write. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220628134234.53771-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-308250_dwlib: Convert bitops to newer formIlpo Järvinen1-13/+13
Instead of open-coding, use BIT(), GENMASK(), and FIELD_GET() helpers. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220630100536.41329-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250_dw: Drop PM ifdefferyAndy Shevchenko1-7/+3
Drop CONFIG_PM and CONFIG_PM_SLEEP ifdeffery while converting dw8250_pm_ops to use new PM macros. Since we are using runtime PM, wrap dw8250_pm_ops into pm_ptr(). Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220630100507.31113-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250_dw: Sort headers alphabeticallyAndy Shevchenko1-8/+9
For the sake of better maintenance, sort included headers alphabetically. While at it, split the serial group of headers which makes clear the subsystem the driver belongs to. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220630093816.28271-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30earlycon: prevent multiple register_console()Michael Walle1-0/+3
If the earlycon parameter is given twice, the kernel will spit out a WARN() in register_console() because it was already registered. The non-dt variant setup_earlycon() already handles that gracefully. The dt variant of_setup_earlycon() doesn't. Add the check there and add the -EALREADY handling in early_init_dt_scan_chosen_stdout(). FWIW, this doesn't happen if CONFIG_ACPI_SPCR_TABLE is set. In that case the registration is delayed until after earlycon parameter(s) are parsed. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220628120705.200617-1-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250_dw: Take port lock while accessing LSRIlpo Järvinen1-0/+3
Accessing LSR requires port lock because it mutates lsr_saved_flags in serial_lsr_in(). Fixes: 197eb5c416ff ("serial: 8250_dw: Use serial_lsr_in() in dw8250_handle_irq()") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/c5879db7-bee9-93f-526e-872a292442@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250_port: Fix spelling mistakeZhang Jiaming1-2/+2
Change 'timeing' to 'timing'. Change 'Characteres' to 'Characters'. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Zhang Jiaming <jiaming@nfschina.com> Link: https://lore.kernel.org/r/20220629094411.39066-1-jiaming@nfschina.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30tty: serial: samsung_tty: loopback mode supportChanho Park1-0/+8
Internal loopback mode can be supported by setting UCON register's Loopback Mode bit. The mode & bit can be supported since s3c2410 and later SoCs. The prefix of LOOPBACK / BIT(5) naming should be also changed to S3C2410_ in order to avoid confusion. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220629004141.51484-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30tty: serial: samsung_tty: support more than 4 uart portsChanho Park1-57/+25
Regarding Exynos Auto v9 SoC, it supports uarts up to 12. However, the maximum number of the ports has been derived from CONFIG_SERIAL_SAMSUNG_UARTS and tightly coupled with the config for previous Samsung SoCs such as s3c24xx and s3c64xx. To overcome this limitation, this changes the usage of the definition to UART_NR which is widely used from other serial drivers. This also defines the value to 12 only for ARM64 SoCs to not affect the change to previous arm32 SoCs. Instead of enumerating all the ports as predefined arrays, this introduces s3c24xx_serial_init_port_default that is initializing the structure as the default value. Reviewed-by: Hector Martin <marcan@marcan.st> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220629005538.60132-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: Fix __stop_tx() & DMA Tx restart racesIlpo Järvinen2-4/+4
Commit e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") changed __dma_tx_complete() to enable THRI that is cleared in __stop_tx() once THRE is asserted as UART runs out bits to transmit. It is possible, however, that more data arrives in between in which case serial8250_tx_dma() resumes Tx. THRI is not supposed to be on during DMA Tx because DMA is based on completion handler, therefore THRI must be cleared unconditionally in serial8250_tx_dma(). When Tx is about to start, another race window exists with serial8250_handle_irq() leading to a call into __stop_tx() while the Tx has already been resumed: __tx_complete(): -> spin_lock(port->lock) -> dma->tx_running = 0 -> serial8250_set_THRI() -> spin_unlock(port->lock) uart_start(): serial8250_handle_irq(): -> spin_lock(port->lock) -> serial8250_tx_dma(): -> dma->tx_running = 1 -> spin_unlock(port->lock) -> spin_lock(port->lock) -> __stop_tx() Close this race by checking !dma->tx_running before calling into __stop_tx(). Fixes: e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220615090651.15340-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottleIlpo Järvinen1-2/+21
The driver must provide throttle and unthrottle in uart_ops when it sets UPSTAT_AUTORTS. Add them using existing stop_rx & enable_interrupts functions. Fixes: 2a76fa283098 (serial: pl011: Adopt generic flag to store auto RTS status) Cc: stable <stable@kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Reported-by: Nuno Gonçalves <nunojpg@gmail.com> Tested-by: Nuno Gonçalves <nunojpg@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220614075637.8558-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: samsung_tty: set dma burst_size to 1Chanho Park1-3/+2
The src_maxburst and dst_maxburst have been changed to 1 but the settings of the UCON register aren't changed yet. They should be changed as well according to the dmaengine slave config. Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions") Cc: stable <stable@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: dw: enable using pdata with ACPIMarcin Wojtas1-12/+12
Commit ffd381445eac ("serial: 8250: dw: Move the USR register to pdata") caused NULL-pointer dereference when booting with ACPI by unconditional usage of the recently added pdata. In order to fix that and prevent similar issues in future, hook the default version of this structure in dw8250_acpi_match table. While at it, sort all entries alphabetically. Fixes: ffd381445eac ("serial: 8250: dw: Move the USR register to pdata") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20220620121046.1307412-1-mw@semihalf.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250_dwlib: Support for 9th bit multipoint addressingIlpo Järvinen1-1/+101
Add 9th bit multipoint addressing mode for DW UART. 9th bit addressing can be used only when HW RS485 is available. Updating RAR (receive address register) is bit tricky because busy indication is not be available when DW UART is strictly 16550 compatible, which is the case with the hardware I was testing with. RAR should not be updated while receive is in progress which is now achieved by deasserting RE and waiting for one frame (in case rx would be in progress, the driver seems to have no way of knowing it w/o busy indication). Because of this complexity, it's better to avoid doing it unless really needed. Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Co-developed-by: Raymond Tan <raymond.tan@intel.com> Co-developed-by: Lakshmi Sowjanya <lakshmi.sowjanya.d@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Lakshmi Sowjanya <lakshmi.sowjanya.d@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: Support for RS-485 multipoint addressesIlpo Järvinen2-1/+25
Add support for RS-485 multipoint addressing using 9th bit [*]. The addressing mode is configured through ->rs485_config(). ADDRB in termios indicates 9th bit addressing mode is enabled. In this mode, 9th bit is used to indicate an address (byte) within the communication line. ADDRB can only be enabled/disabled through ->rs485_config() that is also responsible for setting the destination and receiver (filter) addresses. Add traps to detect unwanted changes to struct serial_rs485 layout using static_assert(). [*] Technically, RS485 is just an electronic spec and does not itself specify the 9th bit addressing mode but 9th bit seems at least "semi-standard" way to do addressing with RS485. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: take termios_rwsem for ->rs485_config() & pass termios as paramIlpo Järvinen18-25/+37
To be able to alter ADDRB within ->rs485_config(), take termios_rwsem before calling ->rs485_config() and pass termios. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250_lpss: Use 32-bit readsIlpo Järvinen1-1/+1
Use 32-bit reads in order to not lose higher bits of DW UART regs. This change does not fix any known issue as the high bits are not used for anything related to 8250 driver (dw8250_readl_ext and dw8250_writel_ext used within the dwlib are already doing readl/writel/ioread32be/iowrite32be anyway). This change is necessary to enables 9th bit address mode. DW UART reports address frames with BIT(8) of LSR. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: create lsr_save_maskIlpo Järvinen3-2/+6
Allow drivers to alter LSR save mask. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: make saved LSR largerIlpo Järvinen6-17/+17
DW flags address received as BIT(8) in LSR. In order to not lose that on read, enlarge lsr_saved_flags to u16. Adjust lsr/status variables and related call chains to use u16. Technically, some of these type conversion would not be needed but it doesn't hurt to be consistent. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: Consolidate BOTH_EMPTY useIlpo Järvinen7-27/+16
Per file BOTH_EMPTY defines are littering our source code here and there. Define once in serial.h and create helper for the check too. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624205424.12686-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: Convert SERIAL_XMIT_SIZE to UART_XMIT_SIZEIlpo Järvinen5-13/+13
Both UART_XMIT_SIZE and SERIAL_XMIT_SIZE are defined. Make them all UART_XMIT_SIZE. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624205424.12686-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: Use C99 array initializer & define UART_REG_UNMAPPEDIlpo Järvinen1-18/+20
Use C99 array initializer insteads of comments and make unmapped checks more obvious. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624205424.12686-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: msm: Rename UART_* defines to MSM_UART_*Ilpo Järvinen1-251/+250
Using UART_* to name defines is a bit problematic. When trying to do unrelated cleanup which also involved tweaking header inclusion logic, caused UART_CSR from serial_reg.h to leak into msm's namespace which is also among msm defines. Thus, rename all UART_* ones to MSM_UART_* to eliminate possibility of collisions. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624205424.12686-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: msm: Convert container_of UART_TO_MSM to static inlineIlpo Järvinen1-23/+26
Create static inline instead of define as it provides type safety and is safer wrt. macros expansion. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624205424.12686-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: st-asc: remove include of pm_runtime.hClaudiu Beznea1-1/+0
st-asc driver doesn't use helpers from pm_runtime.h thus remove its include. Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616140024.2081238-5-claudiu.beznea@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: atmel: remove enable/disable clock due to atmel_console_setup()Claudiu Beznea1-16/+0
There is no need for clk_prepare_enable() at the beginning of atmel_console_setup() and clk_disable_unprepare() at the end of atmel_console_setup() as the clock is already enabled when calling atmel_console_setup() and its disablement is done at the end of probe. Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616140024.2081238-4-claudiu.beznea@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: atmel: use devm_clk_get()Claudiu Beznea1-35/+15
Use devm_clk_get() for serial clock instead of clk_get()/clk_put(). With this move the clk_get in driver's probe function. Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616140024.2081238-3-claudiu.beznea@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: atmel: stop using legacy pm opsClaudiu Beznea1-17/+11
Stop using legacy PM ops and switch using dev_pm_ops. Along with it #ifdef CONFIG_PM are removed and __maybe_unused and pm_ptr() used instead. Coding style recommends (at chapter Conditional Compilation) to avoid using preprocessor conditional and use __maybe_unused instead. Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616140024.2081238-2-claudiu.beznea@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: kgdboc: Fix typo in commentXiang wangx1-1/+1
Delete the redundant word 'the'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220620104653.5451-1-wangxiang@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: Fix refcount leak bug in ucc_uart.cLiang He1-0/+2
In soc_info(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27drivers: tty: serial: Add missing of_node_put() in serial-tegra.cLiang He1-0/+1
In tegra_uart_init(), of_find_matching_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220615111747.3963930-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: Drop timeout from uart_portIlpo Järvinen2-21/+10
Since commit 31f6bd7fad3b ("serial: Store character timing information to uart_port"), per frame timing information is available on uart_port. Uart port's timeout can be derived from frame_time by multiplying with fifosize. Most callers of uart_poll_timeout are not made under port's lock. To be on the safe side, make sure frame_time is only accessed once. As fifo_size is effectively a constant, it shouldn't cause any issues. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220613113905.22962-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250_pericom: Use UART_LCR_DLABIlpo Järvinen1-1/+1
Use UART_LCR_DLAB instead of literal. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220613075736.12283-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: Use UART_LCR_WLEN8 instead of literalIlpo Järvinen1-1/+1
Use UART_LCR_WLEN8 instead of literal 0x03 in size_fifo(). Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220613075736.12283-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: sifive: Remove useless license text when SPDX-License-Identifier is ↵Christophe JAILLET1-10/+0
already used An SPDX-License-Identifier is already in place. There is no need to duplicate part of the corresponding license. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/dbc54eff6f4e077d9126054f395d5bc5b3405917.1654936915.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: use E_TABSZ for the translations sizeJiri Slaby1-1/+1
The code expects "translations" to have 256 (E_TABSZ) values. Use the macro instead of the constant to be explicit about this. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: remove dflt reset from con_do_clear_unimap()Jiri Slaby1-2/+0
con_do_clear_unimap() sets dflt to NULL and then calls con_release_unimap() which does the very same as the first thing. So remove the former as it is apparently superfluous. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: improve UNI_*() macros definitionsJiri Slaby1-4/+13
Use FIELD_GET() and GENMASK() helpers instead of direct shifts and ANDs. This makes the code even more obvious. I didn't know about the helpers at the time of writing the macros. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-6-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: rename struct vc_data::vc_uni_pagedir*Jiri Slaby2-27/+27
As a follow-up to the commit 4173f018aae1 (tty/vt: consolemap: rename and document struct uni_pagedir), rename also the members of struct vc_data. I.e. pagedir -> pagedict. And while touching all the places, remove also the unnecessary vc_ prefix. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: saner variable names in set_inverse_transl()Jiri Slaby1-13/+13
The function uses too vague variable names like i, j, k for iterators, p, q, p1, p2 for pointers etc. Rename all these, so that it is clear what is going on: - dict: for dictionaries. - d, r, g: for dir, row, glyph iterators -- these are unsigned now. - dir, row: for directory and row pointers. - glyph: for the glyph. - and so on... This is a lot of shuffling, but the result pays off, IMO. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: saner variable names in set_inverse_trans_unicode()Jiri Slaby1-5/+5
The function still uses too vague parameter name after commit 50c92a1b2d50 (tty/vt: consolemap: saner variable names in set_inverse_trans_unicode()). So use "dict" instead of "p" for that parameter too. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: remove unused parameter from set_inverse_trans_unicode()Jiri Slaby1-5/+4
conp is unused in set_inverse_trans_unicode(), remove it. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty/vt: consolemap: use ARRAY_SIZE(), part II.Jiri Slaby1-2/+2
The code still uses constants (macros) as bounds in loops after commit 17945d317a52 (tty/vt: consolemap: use ARRAY_SIZE()). The contants are at least macros used also in the definition of the arrays. But use ARRAY_SIZE() on two more places to ensure the loops never run out of bounds even if the array definition change. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-23Merge branch 'rework/kthreads' into for-linusPetr Mladek1-2/+0
2022-06-23Revert "printk: add functions to prefer direct printing"Petr Mladek1-2/+0
This reverts commit 2bb2b7b57f81255c13f4395ea911d6bdc70c9fe2. The testing of 5.19 release candidates revealed missing synchronization between early and regular console functionality. It would be possible to start the console kthreads later as a workaround. But it is clear that console lock serialized console drivers between each other. It opens a big area of possible problems that were not considered by people involved in the development and review. printk() is crucial for debugging kernel issues and console output is very important part of it. The number of consoles is huge and a proper review would take some time. As a result it need to be reverted for 5.19. Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220623145157.21938-7-pmladek@suse.com
2022-06-22powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnodeAndy Shevchenko1-2/+2
Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help cleaning up other parts of the kernel from OF specific code. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # for i2c-mpc Acked-by: Wolfram Sang <wsa@kernel.org> # for the I2C part Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for mscan/mpc5xxx_can Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220507100147.5802-2-andriy.shevchenko@linux.intel.com
2022-06-20Merge tag 'v5.19-rc3' into tty-nextGreg Kroah-Hartman5-5/+11
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-15serial: qcom_geni_serial: Disable MMIO tracing for geni serialSai Prakash Ranjan1-0/+3
Disable MMIO tracing for geni serial driver to prevent excessive logging. Any access over serial console would involve a lot of TX and RX register accesses (and few others), so these MMIO read/write trace events in these drivers cause a lot of unwanted noise because of the high frequency of such operations and it is not very useful tracing these events for such drivers. Given we want to enable these trace events on development devices (maybe not production devices) where performance also really matters so that we don't regress other components by wasting CPU cycles and memory collecting these traces, it makes more sense to disable these traces from such drivers. Also another reason to disable these traces would be to prevent recursive tracing when we display the trace buffer containing these MMIO trace events since writing onto serial console would further record MMIO traces. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-10serial: 8250: Store to lsr_save_flags after lsr readIlpo Järvinen1-0/+2
Not all LSR register flags are preserved across reads. Therefore, LSR readers must store the non-preserved bits into lsr_save_flags. This fix was initially mixed into feature commit f6f586102add ("serial: 8250: Handle UART without interrupt on TEMT using em485"). However, that feature change had a flaw and it was reverted to make room for simpler approach providing the same feature. The embedded fix got reverted with the feature change. Re-add the lsr_save_flags fix and properly mark it's a fix. Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Cc: stable <stable@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@penugtronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10tty: Use flow-control char function on closing pathIlpo Järvinen1-9/+4
Use n_tty_receive_char_flow_ctrl also on the closing path. This makes the code cleaner and consistent. However, there a small change of regression! The earlier closing path has a small difference compared with the normal receive path. If START_CHAR and STOP_CHAR are equal, their precedence is different depending on which path a character is processed. I don't know whether this difference was intentional or not, and if equal START_CHAR and STOP_CHAR is actually used anywhere. But it feels not so useful corner case. While this change would logically belong to those earlier changes, having a separate patch for this is useful. If this regresses, bisect can pinpoint this change rather than the large patch. Also, this change is not necessary to minimal fix for the issue addressed in the previous patch. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606153652.63554-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 11:55:53 +0300