summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2023-12-13serial: 8250_omap: Add earlycon support for the AM654 UART controllerRonald Wahl1-0/+1
commit 8e42c301ce64e0dcca547626eb486877d502d336 upstream. Currently there is no support for earlycon on the AM654 UART controller. This commit adds it. Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231031131242.15516-1-rwahl@gmx.de Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250: 8250_omap: Do not start RX DMA on THRI interruptRonald Wahl1-4/+6
commit c6bb057418876cdfdd29a6f7b8cef54539ee8811 upstream. Starting RX DMA on THRI interrupt is too early because TX may not have finished yet. This change is inspired by commit 90b8596ac460 ("serial: 8250: Prevent starting up DMA Rx on THRI interrupt") and fixes DMA issues I had with an AM62 SoC that is using the 8250 OMAP variant. Cc: stable@vger.kernel.org Fixes: c26389f998a8 ("serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs") Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231101171431.16495-1-rwahl@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bitRonald Wahl1-2/+2
commit 8973ab7a2441b286218f4a5c4c33680e2f139996 upstream. This fixes commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") which unfortunately set the UART_HAS_RHR_IT_DIS bit in the UART_OMAP_IER2 register and never cleared it. Cc: stable@vger.kernel.org Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231031110909.11695-1-rwahl@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: sc16is7xx: address RX timeout interrupt errataDaniel Mack1-0/+12
commit 08ce9a1b72e38cf44c300a44ac5858533eb3c860 upstream. This device has a silicon bug that makes it report a timeout interrupt but no data in the FIFO. The datasheet states the following in the errata section 18.1.4: "If the host reads the receive FIFO at the same time as a time-out interrupt condition happens, the host might read 0xCC (time-out) in the Interrupt Indication Register (IIR), but bit 0 of the Line Status Register (LSR) is not set (means there is no data in the receive FIFO)." The errata description seems to indicate it concerns only polled mode of operation when reading bit 0 of the LSR register. However, tests have shown and NXP has confirmed that the RXLVL register also yields 0 when the bug is triggered, and hence the IRQ driven implementation in this driver is equally affected. This bug has hit us on production units and when it does, sc16is7xx_irq() would spin forever because sc16is7xx_port_irq() keeps seeing an interrupt in the IIR register that is not cleared because the driver does not call into sc16is7xx_handle_rx() unless the RXLVL register reports at least one byte in the FIFO. Fix this by always reading one byte from the FIFO when this condition is detected in order to clear the interrupt. This approach was confirmed to be correct by NXP through their support channels. Tested by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Daniel Mack <daniel@zonque.org> Co-Developed-by: Maxim Popov <maxim.snafu@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231123072818.1394539-1-daniel@zonque.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13ARM: PL011: Fix DMA supportArnd Bergmann1-58/+54
commit 58ac1b3799799069d53f5bf95c093f2fe8dd3cc5 upstream. Since there is no guarantee that the memory returned by dma_alloc_coherent() is associated with a 'struct page', using the architecture specific phys_to_page() is wrong, but using virt_to_page() would be as well. Stop using sg lists altogether and just use the *_single() functions instead. This also simplifies the code a bit since the scatterlists in this driver always have only one entry anyway. https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/ Use consistent names for dma buffers gc: Add a commit log from the initial thread: https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/ Use consistent names for dma buffers Fixes: cb06ff102e2d7 ("ARM: PL011: Add support for Rx DMA buffer polling.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20231122171503.235649-1-gregory.clement@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: ma35d1: Validate console index before assignmentAndi Shyti1-1/+9
commit f0b9d97a77fa8f18400450713358303a435ab688 upstream. The console is immediately assigned to the ma35d1 port without checking its index. This oversight can lead to out-of-bounds errors when the index falls outside the valid '0' to MA35_UART_NR range. Such scenario trigges ran error like the following: UBSAN: array-index-out-of-bounds in drivers/tty/serial/ma35d1_serial.c:555:51 index -1 is out of range for type 'uart_ma35d1_port [17] Check the index before using it and bail out with a warning. Fixes: 930cbf92db01 ("tty: serial: Add Nuvoton ma35d1 serial driver support") Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Cc: Jacky Huang <ychuang3@nuvoton.com> Cc: <stable@vger.kernel.org> # v6.5+ Link: https://lore.kernel.org/r/20231204163804.1331415-2-andi.shyti@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250_dw: Add ACPI ID for Granite Rapids-D UARTAndy Shevchenko1-0/+1
commit e92fad024929c79460403acf946bc9c09ce5c3a9 upstream. Granite Rapids-D has an additional UART that is enumerated via ACPI. Add ACPI ID for it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20231205195524.2705965-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28hvc/xen: fix event channel handling for secondary consolesDavid Woodhouse1-1/+1
commit ef5dd8ec88ac11e8e353164407d55b73c988b369 upstream. The xencons_connect_backend() function allocates a local interdomain event channel with xenbus_alloc_evtchn(), then calls bind_interdomain_evtchn_to_irq_lateeoi() to bind to that port# on the *remote* domain. That doesn't work very well: (qemu) device_add xen-console,id=con1,chardev=pty0 [ 44.323872] xenconsole console-1: 2 xenbus_dev_probe on device/console/1 [ 44.323995] xenconsole: probe of console-1 failed with error -2 Fix it to use bind_evtchn_to_irq_lateeoi(), which does the right thing by just binding that *local* event channel to an irq. The backend will do the interdomain binding. This didn't affect the primary console because the setup for that is special — the toolstack allocates the guest event channel and the guest discovers it with HVMOP_get_param. Fixes: fe415186b43d ("xen/console: harden hvc_xen against event channel storms") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231020161529.355083-2-dwmw2@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28hvc/xen: fix error path in xen_hvc_init() to always register frontend driverDavid Woodhouse1-2/+3
commit 2704c9a5593f4a47620c12dad78838ca62b52f48 upstream. The xen_hvc_init() function should always register the frontend driver, even when there's no primary console — as there may be secondary consoles. (Qemu can always add secondary consoles, but only the toolstack can add the primary because it's special.) Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231020161529.355083-3-dwmw2@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28hvc/xen: fix console unplugDavid Woodhouse1-8/+24
commit a30badfd7c13fc8763a9e10c5a12ba7f81515a55 upstream. On unplug of a Xen console, xencons_disconnect_backend() unconditionally calls free_irq() via unbind_from_irqhandler(), causing a warning of freeing an already-free IRQ: (qemu) device_del con1 [ 32.050919] ------------[ cut here ]------------ [ 32.050942] Trying to free already-free IRQ 33 [ 32.050990] WARNING: CPU: 0 PID: 51 at kernel/irq/manage.c:1895 __free_irq+0x1d4/0x330 It should be using evtchn_put() to tear down the event channel binding, and let the Linux IRQ side of it be handled by notifier_del_irq() through the HVC code. On which topic... xencons_disconnect_backend() should call hvc_remove() *first*, rather than tearing down the event channel and grant mapping while they are in use. And then the IRQ is guaranteed to be freed by the time it's torn down by evtchn_put(). Since evtchn_put() also closes the actual event channel, avoid calling xenbus_free_evtchn() except in the failure path where the IRQ was not successfully set up. However, calling hvc_remove() at the start of xencons_disconnect_backend() still isn't early enough. An unplug request is indicated by the backend setting its state to XenbusStateClosing, which triggers a notification to xencons_backend_changed(), which... does nothing except set its own frontend state directly to XenbusStateClosed without *actually* tearing down the HVC device or, you know, making sure it isn't actively in use. So the backend sees the guest frontend set its state to XenbusStateClosed and stops servicing the interrupt... and the guest spins for ever in the domU_write_console() function waiting for the ring to drain. Fix that one by calling hvc_remove() from xencons_backend_changed() before signalling to the backend that it's OK to proceed with the removal. Tested with 'dd if=/dev/zero of=/dev/hvc1' while telling Qemu to remove the console device. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231020161529.355083-4-dwmw2@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28tty: serial: meson: fix hard LOCKUP on crtscts modePavel Krasavin1-3/+11
commit 2a1d728f20edeee7f26dc307ed9df4e0d23947ab upstream. There might be hard lockup if we set crtscts mode on port without RTS/CTS configured: # stty -F /dev/ttyAML6 crtscts; echo 1 > /dev/ttyAML6; echo 2 > /dev/ttyAML6 [ 95.890386] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 95.890857] rcu: 3-...0: (201 ticks this GP) idle=e33c/1/0x4000000000000000 softirq=5844/5846 fqs=4984 [ 95.900212] rcu: (detected by 2, t=21016 jiffies, g=7753, q=296 ncpus=4) [ 95.906972] Task dump for CPU 3: [ 95.910178] task:bash state:R running task stack:0 pid:205 ppid:1 flags:0x00000202 [ 95.920059] Call trace: [ 95.922485] __switch_to+0xe4/0x168 [ 95.925951] 0xffffff8003477508 [ 95.974379] watchdog: Watchdog detected hard LOCKUP on cpu 3 [ 95.974424] Modules linked in: 88x2cs(O) rtc_meson_vrtc Possible solution would be to not allow to setup crtscts on such port. Tested on S905X3 based board. Fixes: ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver") Cc: stable@vger.kernel.org Signed-off-by: Pavel Krasavin <pkrasavin@imaqliq.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Rokosov <ddrokosov@salutedevices.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28tty/sysrq: replace smp_processor_id() with get_cpu()Muhammad Usama Anjum1-1/+2
commit dd976a97d15b47656991e185a94ef42a0fa5cfd4 upstream. The smp_processor_id() shouldn't be called from preemptible code. Instead use get_cpu() and put_cpu() which disables preemption in addition to getting the processor id. Enable preemption back after calling schedule_work() to make sure that the work gets scheduled on all cores other than the current core. We want to avoid a scenario where current core's stack trace is printed multiple times and one core's stack trace isn't printed because of scheduling of current task. This fixes the following bug: [ 119.143590] sysrq: Show backtrace of all active CPUs [ 119.143902] BUG: using smp_processor_id() in preemptible [00000000] code: bash/873 [ 119.144586] caller is debug_smp_processor_id+0x20/0x30 [ 119.144827] CPU: 6 PID: 873 Comm: bash Not tainted 5.10.124-dirty #3 [ 119.144861] Hardware name: QEMU QEMU Virtual Machine, BIOS 2023.05-1 07/22/2023 [ 119.145053] Call trace: [ 119.145093] dump_backtrace+0x0/0x1a0 [ 119.145122] show_stack+0x18/0x70 [ 119.145141] dump_stack+0xc4/0x11c [ 119.145159] check_preemption_disabled+0x100/0x110 [ 119.145175] debug_smp_processor_id+0x20/0x30 [ 119.145195] sysrq_handle_showallcpus+0x20/0xc0 [ 119.145211] __handle_sysrq+0x8c/0x1a0 [ 119.145227] write_sysrq_trigger+0x94/0x12c [ 119.145247] proc_reg_write+0xa8/0xe4 [ 119.145266] vfs_write+0xec/0x280 [ 119.145282] ksys_write+0x6c/0x100 [ 119.145298] __arm64_sys_write+0x20/0x30 [ 119.145315] el0_svc_common.constprop.0+0x78/0x1e4 [ 119.145332] do_el0_svc+0x24/0x8c [ 119.145348] el0_svc+0x10/0x20 [ 119.145364] el0_sync_handler+0x134/0x140 [ 119.145381] el0_sync+0x180/0x1c0 Cc: jirislaby@kernel.org Cc: stable@vger.kernel.org Fixes: 47cab6a722d4 ("debug lockups: Improve lockup detection, fix generic arch fallback") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20231009162021.3607632-1-usama.anjum@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28tty: vcc: Add check for kstrdup() in vcc_probe()Yi Yang1-3/+13
[ Upstream commit d81ffb87aaa75f842cd7aa57091810353755b3e6 ] Add check for the return value of kstrdup() and return the error, if it fails in order to avoid NULL pointer dereference. Signed-off-by: Yi Yang <yiyang13@huawei.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230904035220.48164-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20tty: tty_jobctrl: fix pid memleak in disassociate_ctty()Yi Yang1-6/+11
[ Upstream commit 11e7f27b79757b6586645d87b95d5b78375ecdfc ] There is a pid leakage: ------------------------------ unreferenced object 0xffff88810c181940 (size 224): comm "sshd", pid 8191, jiffies 4294946950 (age 524.570s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........ backtrace: [<ffffffff814774e6>] kmem_cache_alloc+0x5c6/0x9b0 [<ffffffff81177342>] alloc_pid+0x72/0x570 [<ffffffff81140ac4>] copy_process+0x1374/0x2470 [<ffffffff81141d77>] kernel_clone+0xb7/0x900 [<ffffffff81142645>] __se_sys_clone+0x85/0xb0 [<ffffffff8114269b>] __x64_sys_clone+0x2b/0x30 [<ffffffff83965a72>] do_syscall_64+0x32/0x80 [<ffffffff83a00085>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 It turns out that there is a race condition between disassociate_ctty() and tty_signal_session_leader(), which caused this leakage. The pid memleak is triggered by the following race: task[sshd] task[bash] ----------------------- ----------------------- disassociate_ctty(); spin_lock_irq(&current->sighand->siglock); put_pid(current->signal->tty_old_pgrp); current->signal->tty_old_pgrp = NULL; tty = tty_kref_get(current->signal->tty); spin_unlock_irq(&current->sighand->siglock); tty_vhangup(); tty_lock(tty); ... tty_signal_session_leader(); spin_lock_irq(&p->sighand->siglock); ... if (tty->ctrl.pgrp) //tty->ctrl.pgrp is not NULL p->signal->tty_old_pgrp = get_pid(tty->ctrl.pgrp); //An extra get spin_unlock_irq(&p->sighand->siglock); ... tty_unlock(tty); if (tty) { tty_lock(tty); ... put_pid(tty->ctrl.pgrp); tty->ctrl.pgrp = NULL; //It's too late ... tty_unlock(tty); } The issue is believed to be introduced by commit c8bcd9c5be24 ("tty: Fix ->session locking") who moves the unlock of siglock in disassociate_ctty() above "if (tty)", making a small window allowing tty_signal_session_leader() to kick in. It can be easily reproduced by adding a delay before "if (tty)" and at the entrance of tty_signal_session_leader(). To fix this issue, we move "put_pid(current->signal->tty_old_pgrp)" after "tty->ctrl.pgrp = NULL". Fixes: c8bcd9c5be24 ("tty: Fix ->session locking") Signed-off-by: Yi Yang <yiyang13@huawei.com> Co-developed-by: GUO Zihua <guozihua@huawei.com> Signed-off-by: GUO Zihua <guozihua@huawei.com> Link: https://lore.kernel.org/r/20230831023329.165737-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08serial: core: Fix runtime PM handling for pending txTony Lindgren1-1/+1
commit 6f699743aebf07538e506a46c5965eb8bdd2c716 upstream. Richard reported that a serial port may end up sometimes with tx data pending in the buffer for long periods of time. Turns out we bail out early on any errors from pm_runtime_get(), including -EINPROGRESS. To fix the issue, we need to ignore -EINPROGRESS as we only care about the runtime PM usage count at this point. We check for an active runtime PM state later on for tx. Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Cc: stable <stable@kernel.org> Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Bruce Ashfield <bruce.ashfield@gmail.com> Cc: Mikko Rapeli <mikko.rapeli@linaro.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Randy MacLeod <randy.macleod@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Richard Purdie <richard.purdie@linuxfoundation.org> Link: https://lore.kernel.org/r/20231023074856.61896-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08tty: 8250: Add Brainboxes Oxford Semiconductor-based quirksCameron Williams1-0/+147
commit e4876dacaca46a1b09f9b417480924ab12019a5b upstream. Some of the later revisions of the Brainboxes PX cards are based on the Oxford Semiconductor chipset. Due to the chip's unique setup these cards need to be initialised. Previously these were tested against a reference card with the same broken baudrate on another PC, cancelling out the effect. With this patch they work and can transfer/receive find against an FTDI-based device. Add all of the cards which require this setup to the quirks table. Thanks to Maciej W. Rozycki for clarification on this chip. Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.") Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DU0PR02MB7899D222A4AB2A4E8C57108FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08tty: 8250: Add support for Intashield IX cardsCameron Williams1-0/+21
commit 62d2ec2ded278c7512d91ca7bf8eb9bac46baf90 upstream. Add support for the IX-100, IX-200 and IX-400 serial cards. Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DU0PR02MB7899614E5837E82A03272A4BC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08tty: 8250: Add support for additional Brainboxes PX cardsCameron Williams1-0/+29
commit 9604884e592cd04ead024c9737c67a77f175cab9 upstream. Add support for some more of the Brainboxes PX (PCIe) range of serial cards, namely PX-275/PX-279, PX-475 (serial port, not LPT), PX-820, PX-803/PX-857 (additional ID). Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DU0PR02MB78996BEC353FB346FC35444BC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08tty: 8250: Fix up PX-803/PX-857Cameron Williams1-3/+3
commit ee61337b934c99c2611e0a945d592019b2e00c82 upstream. The PX-803/PX-857 are variants of each other, add a note. Additionally fix up the port counts for the card (2, not 1). Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.") Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DU0PR02MB789978C8ED872FB4B014E132C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08tty: 8250: Fix port count of PX-257Cameron Williams1-1/+1
commit d0ff5b24c2f112f29dea4c38b3bac9597b1be9ba upstream. The port count of the PX-257 Rev3 is actually 2, not 4. Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.") Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DU0PR02MB7899C804D9F04E727B5A0E8FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08tty: 8250: Add support for Intashield IS-100Cameron Williams1-0/+6
commit 4d994e3cf1b541ff32dfb03fbbc60eea68f9645b upstream. Add support for the Intashield IS-100 1 port serial card. Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DU0PR02MB7899A0E0CDAA505AF5A874CDC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08tty: 8250: Add support for Brainboxes UP cardsCameron Williams1-0/+60
commit 2c6fec1e1532f15350be7e14ba6b88a39d289fe4 upstream. Add support for the Brainboxes UP (powered PCI) range of cards, namely UP-189, UP-200, UP-869 and UP-880. Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DU0PR02MB7899B5B59FF3D8587E88C117C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08tty: 8250: Add support for additional Brainboxes UC cardsCameron Williams1-0/+57
commit c563db486db7d245c0e2f319443417ae8e692f7f upstream. Add device IDs for some more Brainboxes UC cards, namely UC-235/UC-246, UC-253/UC-734, UC-302, UC-313, UC-346, UC-357, UC-607 and UC-836. Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DU0PR02MB789969998A6C3FAFCD95C85DC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08tty: 8250: Remove UC-257 and UC-431Cameron Williams1-8/+1
commit 33092fb3af51deb80849e90a17bada44bbcde6b3 upstream. The UC-257 is a serial + LPT card, so remove it from this driver. A patch has been submitted to add it to parport_serial instead. Additionaly, the UC-431 does not use this card ID, only the UC-420 does. The 431 is a 3-port card and there is no generic 3-port configuration available, so remove reference to it from this driver. Fixes: 152d1afa834c ("tty: Add support for Brainboxes UC cards.") Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DU0PR02MB78995ADF7394C74AD4CF3357C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-08tty: n_gsm: fix race condition in status line change on dead connectionsDaniel Starke1-0/+2
commit 3a75b205de43365f80a33b98ec9289785da56243 upstream. gsm_cleanup_mux() cleans up the gsm by closing all DLCIs, stopping all timers, removing the virtual tty devices and clearing the data queues. This procedure, however, may cause subsequent changes of the virtual modem status lines of a DLCI. More data is being added the outgoing data queue and the deleted kick timer is restarted to handle this. At this point many resources have already been removed by the cleanup procedure. Thus, a kernel panic occurs. Fix this by proving in gsm_modem_update() that the cleanup procedure has not been started and the mux is still alive. Note that writing to a virtual tty is already protected by checks against the DLCI specific connection state. Fixes: c568f7086c6e ("tty: n_gsm: fix missing timer to handle stalled links") Cc: stable <stable@kernel.org> Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20231026055844.3127-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-07serial: core: Fix checks for tx runtime PM stateTony Lindgren1-1/+1
Maximilian reported that surface_serial_hub serdev tx does not work during system suspend. During system suspend, runtime PM gets disabled in __device_suspend_late(), and tx is unable to wake-up the serial core port device that we use to check if tx is safe to start. Johan summarized the regression noting that serdev tx no longer always works as earlier when the serdev device is runtime PM active. The serdev device and the serial core controller devices are siblings of the serial port hardware device. The runtime PM usage count from serdev device does not propagate to the serial core device siblings, it only propagates to the parent. In addition to the tx issue for suspend, testing for the serial core port device can cause an unnecessary delay in enabling tx while waiting for the serial core port device to wake-up. The serial core port device wake-up is only needed to flush pending tx when the serial port hardware device was in runtime PM suspended state. To fix the regression, we need to check the runtime PM state of the parent serial port hardware device for tx instead of the serial core port device. As the serial port device drivers may or may not implement runtime PM, we need to also add a check for pm_runtime_enabled(). Reported-by: Maximilian Luz <luzmaximilian@gmail.com> Cc: stable <stable@kernel.org> Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231005075644.25936-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-03serial: 8250_omap: Fix errors with no_console_suspendTony Lindgren1-15/+10
We now get errors on system suspend if no_console_suspend is set as reported by Thomas. The errors started with commit 20a41a62618d ("serial: 8250_omap: Use force_suspend and resume for system suspend"). Let's fix the issue by checking for console_suspend_enabled in the system suspend and resume path. Note that with this fix the checks for console_suspend_enabled in omap8250_runtime_suspend() become useless. We now keep runtime PM usage count for an attached kernel console starting with commit bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console"). Fixes: 20a41a62618d ("serial: 8250_omap: Use force_suspend and resume for system suspend") Cc: stable <stable@kernel.org> Cc: Udit Kumar <u-kumar1@ti.com> Reported-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Thomas Richard <thomas.richard@bootlin.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230926061319.15140-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-03serial: Reduce spinlocked portion of uart_rs485_config()Lukas Wunner1-4/+9
Commit 44b27aec9d96 ("serial: core, 8250: set RS485 termination GPIO in serial core") enabled support for RS485 termination GPIOs behind i2c expanders by setting the GPIO outside of the critical section protected by the port spinlock. Access to the i2c expander may sleep, which caused a splat with the port spinlock held. Commit 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in driver-specific way") erroneously regressed that by spinlocking the GPIO manipulation again. Fix by moving uart_rs485_config() (the function manipulating the GPIO) outside of the spinlocked section and acquiring the spinlock inside of uart_rs485_config() for the invocation of ->rs485_config() only. This gets us one step closer to pushing the spinlock down into the ->rs485_config() callbacks which actually need it. (Some callbacks do not want to be spinlocked because they perform sleepable register accesses, see e.g. sc16is7xx_config_rs485().) Stack trace for posterity: Voluntary context switch within RCU read-side critical section! WARNING: CPU: 0 PID: 56 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch Call trace: rcu_note_context_switch __schedule schedule schedule_timeout wait_for_completion_timeout bcm2835_i2c_xfer __i2c_transfer i2c_transfer i2c_transfer_buffer_flags regmap_i2c_write _regmap_raw_write_impl _regmap_bus_raw_write _regmap_write _regmap_update_bits regmap_update_bits_base pca953x_gpio_set_value gpiod_set_raw_value_commit gpiod_set_value_nocheck gpiod_set_value_cansleep uart_rs485_config uart_add_one_port pl011_register_port pl011_probe Fixes: 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in driver-specific way") Suggested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v6.1+ Link: https://lore.kernel.org/r/f3a35967c28b32f3c6432d0aa5936e6a9908282d.1695307688.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-18Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux"Daniel Starke1-3/+1
This reverts commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239. The commit above is reverted as it did not solve the original issue. gsm_cleanup_mux() tries to free up the virtual ttys by calling gsm_dlci_release() for each available DLCI. There, dlci_put() is called to decrease the reference counter for the DLCI via tty_port_put() which finally calls gsm_dlci_free(). This already clears the pointer which is being checked in gsm_cleanup_mux() before calling gsm_dlci_release(). Therefore, it is not necessary to clear this pointer in gsm_cleanup_mux() as done in the reverted commit. The commit introduces a null pointer dereference: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x156/0x420 ? search_exception_tables+0x37/0x50 ? fixup_exception+0x21/0x310 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? tty_port_put+0x19/0xa0 gsmtty_cleanup+0x29/0x80 [n_gsm] release_one_tty+0x37/0xe0 process_one_work+0x1e6/0x3e0 worker_thread+0x4c/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe1/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The actual issue is that nothing guards dlci_put() from being called multiple times while the tty driver was triggered but did not yet finished calling gsm_dlci_free(). Fixes: 9b9c8195f3f0 ("tty: n_gsm: fix UAF in gsm_cleanup_mux") Cc: stable <stable@kernel.org> Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230914051507.3240-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-18serial: 8250_port: Check IRQ data before useAndy Shevchenko1-1/+4
In case the leaf driver wants to use IRQ polling (irq = 0) and IIR register shows that an interrupt happened in the 8250 hardware the IRQ data can be NULL. In such a case we need to skip the wake event as we came to this path from the timer interrupt and quite likely system is already awake. Without this fix we have got an Oops: serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A ... BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:serial8250_handle_irq+0x7c/0x240 Call Trace: ? serial8250_handle_irq+0x7c/0x240 ? __pfx_serial8250_timeout+0x10/0x10 Fixes: 0ba9e3a13c6a ("serial: 8250: Add missing wakeup event reporting") Cc: stable <stable@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230831222555.614426-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-01Merge tag 'tty-6.6-rc1' of ↵Linus Torvalds110-1628/+1606
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.6-rc1. Lots of cleanups in here this cycle, and some driver updates. Short summary is: - Jiri's continued work to make the tty code and apis be a bit more sane with regards to modern kernel coding style and types - cpm_uart driver updates - n_gsm updates and fixes - meson driver updates - sc16is7xx driver updates - 8250 driver updates for different hardware types - qcom-geni driver fixes - tegra serial driver change - stm32 driver updates - synclink_gt driver cleanups - tty structure size reduction All of these have been in linux-next this week with no reported issues. The last bit of cleanups from Jiri and the tty structure size reduction came in last week, a bit late but as they were just style changes and size reductions, I figured they should get into this merge cycle so that others can work on top of them with no merge conflicts" * tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) tty: shrink the size of struct tty_struct by 40 bytes tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw() tty: n_tty: extract ECHO_OP processing to a separate function tty: n_tty: unify counts to size_t tty: n_tty: use u8 for chars and flags tty: n_tty: simplify chars_in_buffer() tty: n_tty: remove unsigned char casts from character constants tty: n_tty: move newline handling to a separate function tty: n_tty: move canon handling to a separate function tty: n_tty: use MASK() for masking out size bits tty: n_tty: make n_tty_data::num_overrun unsigned tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun() tty: n_tty: use 'num' for writes' counts tty: n_tty: use output character directly tty: n_tty: make flow of n_tty_receive_buf_common() a bool Revert "tty: serial: meson: Add a earlycon for the T7 SoC" Documentation: devices.txt: Fix minors for ttyCPM* Documentation: devices.txt: Remove ttySIOC* Documentation: devices.txt: Remove ttyIOC* serial: 8250_bcm7271: improve bcm7271 8250 port ...
2023-08-30Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of ↵Linus Torvalds2-8/+3
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - An extensive rework of kexec and crash Kconfig from Eric DeVolder ("refactor Kconfig to consolidate KEXEC and CRASH options") - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a couple of macros to args.h") - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper commands") - vsprintf inclusion rationalization from Andy Shevchenko ("lib/vsprintf: Rework header inclusions") - Switch the handling of kdump from a udev scheme to in-kernel handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory hot un/plug") - Many singleton patches to various parts of the tree * tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits) document while_each_thread(), change first_tid() to use for_each_thread() drivers/char/mem.c: shrink character device's devlist[] array x86/crash: optimize CPU changes crash: change crash_prepare_elf64_headers() to for_each_possible_cpu() crash: hotplug support for kexec_load() x86/crash: add x86 crash hotplug support crash: memory and CPU hotplug sysfs attributes kexec: exclude elfcorehdr from the segment digest crash: add generic infrastructure for crash hotplug support crash: move a few code bits to setup support of crash hotplug kstrtox: consistently use _tolower() kill do_each_thread() nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse scripts/bloat-o-meter: count weak symbol sizes treewide: drop CONFIG_EMBEDDED lockdep: fix static memory detection even more lib/vsprintf: declare no_hash_pointers in sprintf.h lib/vsprintf: split out sprintf() and friends kernel/fork: stop playing lockless games for exe_file replacement adfs: delete unused "union adfs_dirtail" definition ...
2023-08-30Merge tag 'mm-stable-2023-08-28-18-26' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Some swap cleanups from Ma Wupeng ("fix WARN_ON in add_to_avail_list") - Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which reduces the special-case code for handling hugetlb pages in GUP. It also speeds up GUP handling of transparent hugepages. - Peng Zhang provides some maple tree speedups ("Optimize the fast path of mas_store()"). - Sergey Senozhatsky has improved te performance of zsmalloc during compaction (zsmalloc: small compaction improvements"). - Domenico Cerasuolo has developed additional selftest code for zswap ("selftests: cgroup: add zswap test program"). - xu xin has doe some work on KSM's handling of zero pages. These changes are mainly to enable the user to better understand the effectiveness of KSM's treatment of zero pages ("ksm: support tracking KSM-placed zero-pages"). - Jeff Xu has fixes the behaviour of memfd's MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED"). - David Howells has fixed an fscache optimization ("mm, netfs, fscache: Stop read optimisation when folio removed from pagecache"). - Axel Rasmussen has given userfaultfd the ability to simulate memory poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD"). - Miaohe Lin has contributed some routine maintenance work on the memory-failure code ("mm: memory-failure: remove unneeded PageHuge() check"). - Peng Zhang has contributed some maintenance work on the maple tree code ("Improve the validation for maple tree and some cleanup"). - Hugh Dickins has optimized the collapsing of shmem or file pages into THPs ("mm: free retracted page table by RCU"). - Jiaqi Yan has a patch series which permits us to use the healthy subpages within a hardware poisoned huge page for general purposes ("Improve hugetlbfs read on HWPOISON hugepages"). - Kemeng Shi has done some maintenance work on the pagetable-check code ("Remove unused parameters in page_table_check"). - More folioification work from Matthew Wilcox ("More filesystem folio conversions for 6.6"), ("Followup folio conversions for zswap"). And from ZhangPeng ("Convert several functions in page_io.c to use a folio"). - page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext"). - Baoquan He has converted some architectures to use the GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take GENERIC_IOREMAP way"). - Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support batched/deferred tlb shootdown during page reclamation/migration"). - Better maple tree lockdep checking from Liam Howlett ("More strict maple tree lockdep"). Liam also developed some efficiency improvements ("Reduce preallocations for maple tree"). - Cleanup and optimization to the secondary IOMMU TLB invalidation, from Alistair Popple ("Invalidate secondary IOMMU TLB on permission upgrade"). - Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes for arm64"). - Kemeng Shi provides some maintenance work on the compaction code ("Two minor cleanups for compaction"). - Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most file-backed faults under the VMA lock"). - Aneesh Kumar contributes code to use the vmemmap optimization for DAX on ppc64, under some circumstances ("Add support for DAX vmemmap optimization for ppc64"). - page-ext cleanups from Kemeng Shi ("add page_ext_data to get client data in page_ext"), ("minor cleanups to page_ext header"). - Some zswap cleanups from Johannes Weiner ("mm: zswap: three cleanups"). - kmsan cleanups from ZhangPeng ("minor cleanups for kmsan"). - VMA handling cleanups from Kefeng Wang ("mm: convert to vma_is_initial_heap/stack()"). - DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes: implement DAMOS tried total bytes file"), ("Extend DAMOS filters for address ranges and DAMON monitoring targets"). - Compaction work from Kemeng Shi ("Fixes and cleanups to compaction"). - Liam Howlett has improved the maple tree node replacement code ("maple_tree: Change replacement strategy"). - ZhangPeng has a general code cleanup - use the K() macro more widely ("cleanup with helper macro K()"). - Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap on memory feature on ppc64"). - pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list in page_alloc"), ("Two minor cleanups for get pageblock migratetype"). - Vishal Moola introduces a memory descriptor for page table tracking, "struct ptdesc" ("Split ptdesc from struct page"). - memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups for vm.memfd_noexec"). - MM include file rationalization from Hugh Dickins ("arch: include asm/cacheflush.h in asm/hugetlb.h"). - THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text output"). - kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use object_cache instead of kmemleak_initialized"). - More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor and _folio_order"). - A VMA locking scalability improvement from Suren Baghdasaryan ("Per-VMA lock support for swap and userfaults"). - pagetable handling cleanups from Matthew Wilcox ("New page table range API"). - A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop using page->private on tail pages for THP_SWAP + cleanups"). - Cleanups and speedups to the hugetlb fault handling from Matthew Wilcox ("Change calling convention for ->huge_fault"). - Matthew Wilcox has also done some maintenance work on the MM subsystem documentation ("Improve mm documentation"). * tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits) maple_tree: shrink struct maple_tree maple_tree: clean up mas_wr_append() secretmem: convert page_is_secretmem() to folio_is_secretmem() nios2: fix flush_dcache_page() for usage from irq context hugetlb: add documentation for vma_kernel_pagesize() mm: add orphaned kernel-doc to the rst files. mm: fix clean_record_shared_mapping_range kernel-doc mm: fix get_mctgt_type() kernel-doc mm: fix kernel-doc warning from tlb_flush_rmaps() mm: remove enum page_entry_size mm: allow ->huge_fault() to be called without the mmap_lock held mm: move PMD_ORDER to pgtable.h mm: remove checks for pte_index memcg: remove duplication detection for mem_cgroup_uncharge_swap mm/huge_memory: work on folio->swap instead of page->private when splitting folio mm/swap: inline folio_set_swap_entry() and folio_swap_entry() mm/swap: use dedicated entry for swap in folio mm/swap: stop using page->private on tail pages for THP_SWAP selftests/mm: fix WARNING comparing pointer to 0 selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check ...
2023-08-27tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()Jiri Slaby (SUSE)1-13/+12
The code is duplicated to perform the copy twice -- to handle buffer wrap-around. Instead of the duplication, roll this into the loop. (And add some blank lines around to have the code a bit more readable.) Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-15-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: extract ECHO_OP processing to a separate functionJiri Slaby (SUSE)1-96/+98
__process_echoes() contains ECHO_OPs processing. It is stuffed in a while loop and the whole function is barely readable. Separate it to a new function: n_tty_process_echo_ops(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-14-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: unify counts to size_tJiri Slaby (SUSE)1-17/+15
Some count types are already 'size_t' for a long time. Some were switched to 'size_t' recently. Unify the rest with those now. This allows for some min_t()s to become min()s. And make one min() an explicit min_t() as we are comparing signed 'room' to unsigned 'count'. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-13-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: use u8 for chars and flagsJiri Slaby (SUSE)1-36/+36
Unify with the tty layer and use u8 for both chars and flags. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-12-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: simplify chars_in_buffer()Jiri Slaby (SUSE)1-6/+2
The 'if' in chars_in_buffer() is misleadingly inverted. And since the only difference is the head used for computation, cache the head using ternary operator. And use that in return directly. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: remove unsigned char casts from character constantsJiri Slaby (SUSE)1-3/+3
We compile with -funsigned-char, so all character constants are already unsigned chars. Therefore, remove superfluous casts. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-10-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: move newline handling to a separate functionJiri Slaby (SUSE)1-8/+19
Currently, n_tty handles the newline in a label in n_tty_receive_char_canon(). That is invoked from two more places. Split this code to a separate function and avoid the label in this case. This makes the code flow more understandable. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-9-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: move canon handling to a separate functionJiri Slaby (SUSE)1-71/+87
n_tty_receive_char_special() is already complicated enough. Split the canon handling to a separate function: n_tty_receive_char_canon(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-8-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: use MASK() for masking out size bitsJiri Slaby (SUSE)1-12/+11
In n_tty, there is already a macro to mask out top bits from ring buffer counters. It is MASK() added some time ago. So use it more in the code to make it more readable. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-7-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: make n_tty_data::num_overrun unsignedJiri Slaby (SUSE)1-2/+2
n_tty_data::num_overrun is unlikely to overflow in a second. But make it explicitly unsigned to avoid printing negative values. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-6-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()Jiri Slaby (SUSE)1-2/+1
The jiffies tests in n_tty_receive_overrun() are simplified ratelimiting (without locking). We could use struct ratelimit_state and the helpers, but to me, it occurs to be too complex for this use case. But the code currently tests both if the time passed (the first time_after()) and if jiffies wrapped around (the second time_after()). time_is_before_jiffies() takes care of both, provided overrun_time is initialized at the allocation time. So switch to time_is_before_jiffies(), the same what ratelimiting does. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-5-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: use 'num' for writes' countsJiri Slaby (SUSE)1-9/+8
We have a separate misnomer 'c' to hold the retuned value from tty->ops->write(). Instead, use 'num' already defined on another place (and already properly typed). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: use output character directlyJiri Slaby (SUSE)1-2/+1
There is no point to use a local variable to store the character when we can pass it directly. This assignment comes from era when we used to do get_user(c, b). We no longer need this, so fix this. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27tty: n_tty: make flow of n_tty_receive_buf_common() a boolJiri Slaby (SUSE)1-3/+3
The 'flow' parameter of n_tty_receive_buf_common() is meant to be a boolean value. So use bool and alter call sites accordingly. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230827074147.2287-2-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-27Revert "tty: serial: meson: Add a earlycon for the T7 SoC"Lucas Tanure1-2/+0
This reverts commit 6a4197f9763325043abf7690a21124a9facbf52e New SoC will use ttyS0 instead of ttyAML, so T7 SoC doesn't need a OF_EARLYCON_DECLARE. Fixes: 6a4197f97633 ("tty: serial: meson: Add a earlycon for the T7 SoC") Signed-off-by: Lucas Tanure <tanure@linux.com> Link: https://lore.kernel.org/r/20230827082944.5100-1-tanure@linux.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: 8250_bcm7271: improve bcm7271 8250 portJustin Chen2-3/+9
The 8250 BCM7271 UART is not a direct match to PORT_16550A and other generic ports do not match its hardware capabilities. PORT_ALTR matches the rx trigger levels, but its vendor configurations are not compatible. Unfortunately this means we need to create another port to fully capture the hardware capabilities of the BCM7271 UART. To alleviate some latency pressures, we default the rx trigger level to 8. Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/1692643978-16570-1-git-send-email-justin.chen@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22serial: sc16is7xx: add missing support for rs485 devicetree propertiesHugo Villeneuve1-0/+4
Retrieve rs485 devicetree properties on registration of sc16is7xx ports in case they are attached to an rs485 transceiver. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com> Tested-by: Lech Perczak <lech.perczak@camlingroup.com> Link: https://lore.kernel.org/r/20230807214556.540627-7-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-22 00:42:46 +0300