summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2012-11-22tty/8250 Add XR17D15x devices to the exar_handle_irq overrideMatt Schulte1-2/+4
Add XR17D15x devices to the exar_handle_irq override: they have the same extra interrupt register that could fire and never be serviced by the standard handle_irq. Signed-off-by: Matt Schulte <matts@commtech-fastcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22tty/8250: Add sleep capability to XR17D15X portsMatt Schulte1-3/+9
Add sleep capability to XR17D15X ports Signed-off-by: Matt Schulte <matts@commtech-fastcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22serial: Add initialization of sampling mode and tx/rx triggers to ↵Matt Schulte1-0/+4
pci_xr17v35x_setup Add initialization of sampling mode and tx/rx triggers to pci_xr17v35x_setup Signed-off-by: Matt Schulte <matts@commtech-fastcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22serial: Optimization: check for presence of UPF_EXAR_EFR flag before serial_inMatt Schulte1-3/+3
Optimization: check for presence of UPF_EXAR_EFR flag before serial_in Signed-off-by: Matt Schulte <matts@commtech-fastcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22serial: bfin_uart: Don't switch baud rate untill the transfer buffer is empty.Sonic Zhang1-0/+9
set_termios may be invoked before the former data transfer is completed. Block until the tranfer is done. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22pty: Mark pty_resize staticJosh Triplett1-1/+1
Nothing outside of drivers/tty/pty.c references pty_resize. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22Serial: Add support for new devices: Exar's XR17V35x family of multi-port ↵Matt Schulte2-0/+167
PCIe UARTs Add support for new devices: Exar's XR17V35x family of multi-port PCIe UARTs. Signed-off-by: Matt Schulte <matts@commtech-fastcom.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22tty: remove use of __devexitBill Pemberton53-66/+66
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Tobias Klauser <tklauser@distanz.ch> Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Tony Prisk <linux@prisktech.co.nz> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22tty: remove use of __devinitconstBill Pemberton3-3/+3
CONFIG_HOTPLUG is going away as an option so __devinitconst is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22tty: remove use of __devinitdataBill Pemberton9-9/+9
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Alan Cox <alan@linux.intel.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22tty: remove use of __devinitdataBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22tty: remove use of __devinitBill Pemberton60-113/+113
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Tony Prisk <linux@prisktech.co.nz> Acked-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22tty: serial: remove use of __devexit_pBill Pemberton44-70/+70
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Alan Cox <alan@linux.intel.com> Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Tony Prisk <linux@prisktech.co.nz> Acked-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22tty: remove use of __devexit_pBill Pemberton10-10/+10
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22tty: Mark tty_del_file and __tty_hangup staticJosh Triplett1-2/+2
Nothing outside of drivers/tty/tty_io.c references these functions, so mark them static. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22drivers/tty/vt/vt_ioctl.c: Include <linux/suspend.h> for pm_set_vt_switchJosh Triplett1-0/+1
C files should include the header files that prototype their functions. This keeps the types in sync, and eliminates warnings from GCC (-Wmissing-prototypes) and Sparse (-Wdecl). Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17Merge 3.7-rc6 into tty-nextGreg Kroah-Hartman2-7/+1
2012-11-16serial: mxs-auart: add the DMA support for mx28Huang Shijie1-5/+317
Only we meet the following conditions, we can enable the DMA support for auart: (1) We enable the DMA support in the dts file, such as arch/arm/boot/dts/imx28.dtsi. (2) We enable the hardware flow control. (3) We use the mx28, not the mx23. Due to hardware bug(see errata: 2836), we can not add the DMA support to mx23. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: mxs-auart: distinguish the different SOCsHuang Shijie1-6/+36
The current mxs-auart driver is used for both mx23 and mx28. But in mx23, the DMA has a bug(see errata:2836). We can not add the DMA support in mx23, but we can add DMA support to auart in mx28. So in order to add the DMA support for the auart in mx28, we should distinguish the distinguish SOCs. This patch adds a new platform_device_id table and a inline function is_imx28_auart() to distinguish the mx23 and mx28. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16tty/8250_early: Turn serial_in/serial_out into weak symbols.Noam Camus1-21/+21
Allows overriding default methods serial_in/serial_out. In such platform specific replacement it is possible to use other regshift, biased register offset, any other manipulation that is not covered with common default methods. Overriding default methods may be useful for platforms which got serial peripheral with registers represented in big endian. In this situation and assuming that 32 bit operations / alignment is required then it may be useful to swab words before/after accessing the serial registers. Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: sh-sci: fix possible race cases on SCSCR register accessesShinya Kuribayashi1-0/+6
In the previous commit, console write function (serial_console_write) is changed to disable SCI interrupts while printing console strings. This introduces possible race cases in the serial startup / shutdown functions on SMP systems. This patch fixes the sh-sci in the same way as commit 9ec1882df2 (tty: serial: imx: console write routing is unsafe on SMP, from Xinyu Chen <xinyu.chen@freescale.com>, 2012-08-27) did. There could be several consumers of the console, * the kernel printk * the init process using /dev/kmsg to call printk to show log * shell, which opens /dev/console and writes with sys_write() The shell goes into the normal UART open() and write() system calls, while the other two go into the console operations. The open() call invokes serial startup function (sci_startup), which will write to the SCSCR register (to enable or disable SCI interrupts) without any locking. This will conflict with the console serial function. Add spinlock protections in sci_startup() and sci_shutdown() properly. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: sh-sci: add locking to console write function to avoid SMP lockupShinya Kuribayashi1-1/+22
Symptom: When entering the suspend with Android logcat running, printk() call gets stuck and never returns. The issue can be observed at printk()s on nonboot CPUs when going to offline with their interrupts disabled, and never seen at boot CPU (core0 in our case). Details: serial_console_write() lacks of appropriate spinlock handling. In SMP systems, as long as sci_transmit_chars() is being processed at one CPU core, serial_console_write() can stuck at the other CPU core(s), when it tries to access to the same serial port _without_ a proper locking. serial_console_write() waits for the transmit FIFO getting empty, while sci_transmit_chars() writes data to the FIFO. In general, peripheral interrupts are routed to boot CPU (core0) by Linux ARM standard affinity settings. SCI(F) interrupts are handled by core0, so sci_transmit_chars() is processed on core0 as well. When logcat is running, it writes enormous log data to the kernel at every moment, forever. So core0 can repeatedly continue to process sci_transmit_chars() in its interrupt handler, which eventually makes the other CPU core(s) stuck at serial_console_write(). Looking at serial/8250.c, this is a known console write lockup issue with SMP kernels. Fix the sh-sci driver in the same way 8250.c does. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: sh-sci: fix common SCIFB regmap definitionTakashi Yoshii1-3/+3
About FIFO count, there are two variants of SCIFs which show a) TX count in upper, RX count in lower byte of FDR register b) TX count in TFDR register, RX count in RFDR register Common SCIFB regmap in current source code is defined as "a". At least 7372 and 73a0 HW manual say their SICFB are "b". This patch alters the definition to "b", considering the current one has come from a mistake. The reason is as follows. The flag SCIFB sh-sci driver means it has 256 byte FIFO. The count is from 0(empty) to 256(full), that makes 9-bit. Because FDR is 16-bit register, it can not hold two 9-bits. That's why, SCIFB can not be "a". Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: sh-sci: mask SCTFDR/RFDR according to fifosizeTakashi Yoshii1-2/+2
Current mask 0xff to SCTFDR/RFDR damages SCIFB, because the registers on SCIFB have 9-bit data (0 to 256). This patch changes the mask according to port->fifosize. Though I'm not sure if the mask is really needed (I don't know if there are variants which have non-zero upper bits), it is safer. Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: sh-sci: support lower baud rateTakashi Yoshii1-11/+8
Support prescaler 1/16 and 1/64, in addition to current 1 and 1/4. Supporting below 2400bps was dropped long time ago in mainline. Since then, setting lower rate has been resulting in erroneous register value, without indicating any errors through API. This patch adds more prescaler to support lower rates again. This still doesn't check range, but we won't hit the case because even 50bps at 48MHz clock is now supported. Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: sh-sci: fix condition test to set SCBRRTakashi Yoshii1-1/+1
SCBRR == 0 is valid value (divide by 1). Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: sh-sci: console runtime PM support (revisit)Teppei Kamijou1-11/+16
The commit 1ba7622094 (serial: sh-sci: console Runtime PM support, from Magnus Damm <damm@opensource.se>, 2011-08-03), tried to support console runtime PM, but unfortunately it didn't work for us for some reason. We did not investigated further at that time, instead would like to propose a different approach. In Linux tty/serial world, to get console PM work properly, a serial client driver does not have to maintain .runtime_suspend()/..resume() calls itself, but can leave console power power management handling to the serial core driver. This patch moves the sh-sci driver in that direction. Notes: * There is room to optimize console runtime PM more aggressively by maintaining additional local runtime PM calls, but as a first step having .pm() operation would suffice. * We still have a couple of direct calls to sci_port_enable/..disable left in the driver. We have to live with them, because they're out of serial core's help. Signed-off-by: Teppei Kamijou <teppei.kamijou.yb@renesas.com> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16Partially revert "serial: sh-sci: console Runtime PM support"Shinya Kuribayashi1-52/+1
This partially reverts commit 1ba7622094 (serial: sh-sci: console Runtime PM support, from Magnus Damm <damm@opensource.se>, 2011-08-03). The generic 'serial_core' can take care of console PM maintenance, so all (or at least the first thing) we have to do to get console PM work properly, is to implement uart_ops ->pm() operation in the sh-sci serial client driver. This patch partially reverts the commit above, but leaving sci_reset() change in place, because sci_reset() is already part of another commit (73c3d53f38 serial: sh-sci: Avoid FIFO clear for MCE toggle.). A revised version of console PM support follows next. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16Revert "sh-sci / PM: Use power.irq_safe"Shinya Kuribayashi1-1/+0
This reverts commit 5a50a01bf0 (sh-sci / PM: Use power.irq_safe, from Rafael J. Wysocki <rjw@sisk.pl>, 2011-08-24). In order to get console PM work properly, we should implement uart_ops ->pm() operation, rather than sprinkle band-ading runtime PM calls in the driver. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16Revert "sh-sci / PM: Avoid deadlocking runtime PM"Shinya Kuribayashi1-5/+0
This reverts commit 048be431e4 (sh-sci / PM: Avoid deadlocking runtime PM, from Rafael J. Wysocki <rjw@sisk.pl>, 2012-03-09). In order to get console PM work properly, we should implement uart_ops ->pm() operation, rather than sprinkle band-ading runtime PM calls in the driver. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16TTY: call tty_port_destroy in the rest of driversJiri Slaby18-21/+74
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. To be sure, the TTY buffers (and later some stuff) are gone along with the tty_port, we have to call tty_port_destroy at tear-down places. This is mostly where the structure containing a tty_port is freed. This patch does exactly that -- put tty_port_destroy at those places. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16TTY: isicom, fix tty buffers memory leakJiri Slaby1-9/+12
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. This one is special as we need more work to be done. Previously, the tty_port was initialized at module load time, but to be able to destroy the port and init it again, we now do the initialization in probe and destroy in remove. I.e. at more appropriate places for that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16TTY: introduce tty_port_destroyJiri Slaby1-1/+15
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. Those using refcounting are safe now, but for those which do not we introduce a function to be called right before the tty_port is freed by the drivers. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16TTY: n_gsm, use kref from tty_portJiri Slaby1-6/+5
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. Here it is enough to switch to refcounting in tty_port. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16TTY: pty, fix tty buffers leakJiri Slaby2-2/+2
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. PTY is one of those, here we just need to use tty_port_put instead of kfree. (Assuming tty_port_destructor does not need port->ops to be set which we change here too.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16TTY: isicom, stop using port->ttyJiri Slaby1-1/+1
Do not access unsafe port->tty pointer when we have a safe tty already. Use the safe one. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16tty/serial/ar933x_uart: fix baud rate calculationGabor Juhos1-5/+85
The UART of the AR933x SoC implements a fractional divisor for generating the desired baud rate. The current code uses a fixed value for the fractional part of the divisor, and this leads to improperly calculated baud rates: baud scale step real baud diff 300 5207* 8192 17756 17456 5818.66% 600 2603* 8192 35511 34911 5818.50% 1200 1301* 8192 71023 69823 5818.58% 2400 650* 8192 11241 8841 368.37% 4800 324* 8192 22645 17845 371.77% 9600 161 8192 9645 45 0.46% 14400 107 8192 14468 68 0.47% 19200 80 8192 19290 90 0.46% 28800 53 8192 28935 135 0.46% 38400 39 8192 39063 663 1.72% 57600 26 8192 57870 270 0.46% 115200 12 8192 120192 4992 4.33% 230400 5 8192 260417 30017 13.02% 460800 2 8192 520833 60033 13.02% 921600 0 8192 1562500 640900 69.93% After the patch, the integer and fractional parts of the divisor will be calculated dynamically. This ensures that the UART will use correct baud rates: baud scale step real baud diff 300 6 11 300 0 0.00% 600 54 173 600 0 0.00% 1200 30 195 1200 0 0.00% 2400 30 390 2400 0 0.00% 4800 48 1233 4800 0 0.00% 9600 78 3976 9600 0 0.00% 14400 98 7474 14400 0 0.00% 19200 55 5637 19200 0 0.00% 28800 130 19780 28800 0 0.00% 38400 36 7449 38400 0 0.00% 57600 78 23857 57600 0 0.00% 115200 43 26575 115200 0 0.00% 230400 23 28991 230400 0 0.00% 460800 11 28991 460800 0 0.00% 921600 5 28991 921599 -1 0.00% Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16mm, oom: ensure sysrq+f always passes valid zonelistDavid Rientjes1-1/+2
With hotpluggable and memoryless nodes, it's possible that node 0 will not be online, so use the first online node's zonelist rather than hardcoding node 0 to pass a zonelist with all zones to the oom killer. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: Unneeded ARCH dependencies are removedAlexander Shiyan1-12/+12
This patch performs a small cleanup tty/Serial/Kconfig file by removing unneeded ARCH dependencies. This dependencies already included in board/type symbols. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: mfd: Add nmi_touch_watchdog() into the console write functionFeng Tang1-0/+3
This is following what 8250 driver is doing in console write function, to avoid the hardware lockup case. v2: incldudes the <linux/nmi.h> Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: bfin-uart: avoid dead lock in rx irq handler in smp kernelSteven Miao1-4/+3
Disabing dma irq and lock bottom half in smp kernel doesn't ensure exclusive uart access. Call spin_lock_irqsave() instead. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: cast before shifting on port ioAlan Cox1-1/+1
Without this we will shift data into oblivion and give wrong results on some configurations Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: xilinx_uartps: kill CONFIG_OF conditionalJosh Cartwright2-9/+1
The Zynq platform requires the use of CONFIG_OF. Remove the #ifdef conditionals in the uartps driver. Make dependency explicit in Kconfig. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16ipwireless: don't oops if we run out of spaceAlan Cox1-1/+4
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=49851 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16moxa: dcd handling of CLOCAL is backwardsAlan Cox1-1/+1
We should do hangup on dcd loss if CLOCAL is false not true. Signed-off-by: Alan Cox <alan@linux.intel.com> Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=49911 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial: ifx6x60: ifx_spi_write don't need to do mrdy_assert when fifo is not ↵Jun Chen1-3/+10
empty This patch check whether the fifo lenth is empty before writing new data to fifo.If condition is true,ifx_spi_write need to trigger one mrdy_assert. If condition is false,the mrdy_assert will be trigger by the next ifx_spi_io. Cc: Bi Chao <chao.bi@intel.com> Signed-off-by: Chen Jun <jun.d.chen@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16serial:ifx6x60:SPI header is decoded incorrectlychao bi1-2/+2
This patch is to correct the bit mapping of "MORE" and "CTS" in SPI frame header. Per SPI protocol, SPI header is encoded with length of 4 byte, which is defined as below: bit 0 ~ 11: current data size; bit 12: "MORE" bit; bit 13: reserve bit 14 ~ 15: reserve bit 16 ~ 27: next data size bit 28: RI bit 29: DCD bit 30: CTS/RTS bit 31: DSR/DTR According to above SPI header structure, the bit mapping of "MORE" and "CTS" is incorrect in function ifx_spi_decode_spi_header(); Cc: Chen Jun <jun.d.chen@intel.com> Signed-off-by: channing <chao.bi@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15tty: serial: max310x: Add terminating entry for spi_device_id tableAxel Lin1-0/+1
The spi_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15TTY: hvc_console, fix port reference count going to zero prematurelyPaul Mackerras1-7/+0
Commit bdb498c20040 "TTY: hvc_console, add tty install" took the port refcounting out of hvc_open()/hvc_close(), but failed to remove the kref_put() and tty_kref_put() calls in hvc_hangup() that were there to remove the extra references that hvc_open() had taken. The result was that doing a vhangup() when the current terminal was a hvc_console, then closing the current terminal, would end up calling destroy_hvc_struct() and making the port disappear entirely. This meant that Fedora 17 systems would boot up but then not display the login prompt on the console, and attempts to open /dev/hvc0 would give a "No such device" error. This fixes it by removing the extra kref_put() and tty_kref_put() calls. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01tty: of_serial: fix return value check in of_platform_serial_setup()Wei Yongjun1-2/+2
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-07 19:54:42 +0300