summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2025-08-28vt: defkeymap: Map keycodes above 127 to K_HOLEMyrrh Periwinkle1-0/+112
commit b43cb4ff85da5cf29c4cd351ef1d7dd8210780f7 upstream. The maximum number of keycodes got bumped to 256 a very long time ago, but the default keymaps were never adjusted to match. This is causing the kernel to interpret keycodes above 127 as U+0000 if the shipped generated keymap is used. Fix this by mapping all keycodes above 127 to K_HOLE so the kernel ignores them. The contents of this patche were generated by rerunning `loadkeys --mktable --unicode` and only including the changes to map keycodes above 127 to K_HOLE. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz> Cc: stable <stable@kernel.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250702-vt-misc-unicode-fixes-v1-2-c27e143cc2eb@qtmlabs.xyz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28vt: keyboard: Don't process Unicode characters in K_OFF modeMyrrh Periwinkle1-1/+1
commit b1cc2092ea7a52e2c435aee6d2b1bcb773202663 upstream. We don't process Unicode characters if the virtual terminal is in raw mode, so there's no reason why we shouldn't do the same for K_OFF (especially since people would expect K_OFF to actually turn off all VT key processing). Fixes: 9fc3de9c8356 ("vt: Add virtual console keyboard mode OFF") Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz> Cc: stable <stable@kernel.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250702-vt-misc-unicode-fixes-v1-1-c27e143cc2eb@qtmlabs.xyz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28serial: 8250: fix panic due to PSLVERRYunhui Cui1-2/+1
commit 7f8fdd4dbffc05982b96caf586f77a014b2a9353 upstream. When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround") Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/ Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com [ Applied fix to serial8250_do_startup() instead of serial8250_initialize() ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28pch_uart: Fix dma_sync_sg_for_device() nents valueThomas Fourier1-1/+1
commit 6c0e9f05c9d7875995b0e92ace71be947f280bbd upstream. The dma_sync_sg_for_device() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned according to the documentation in Documentation/core-api/dma-api.rst:450: With the sync_sg API, all the parameters must be the same as those passed into the sg mapping API. Fixes: da3564ee027e ("pch_uart: add multi-scatter processing") Cc: stable <stable@kernel.org> Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250701113452.18590-2-fourier.thomas@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-17vt: add missing notification when switching back to text modeNicolas Pitre1-0/+1
[ Upstream commit ff78538e07fa284ce08cbbcb0730daa91ed16722 ] Programs using poll() on /dev/vcsa to be notified when VT changes occur were missing one case: the switch from gfx to text mode. Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Link: https://lore.kernel.org/r/9o5ro928-0pp4-05rq-70p4-ro385n21n723@onlyvoer.pbz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17tty: serial: uartlite: register uart driver in initJakub Lewalski1-3/+12
[ Upstream commit 6bd697b5fc39fd24e2aa418c7b7d14469f550a93 ] When two instances of uart devices are probing, a concurrency race can occur. If one thread calls uart_register_driver function, which first allocates and assigns memory to 'uart_state' member of uart_driver structure, the other instance can bypass uart driver registration and call ulite_assign. This calls uart_add_one_port, which expects the uart driver to be fully initialized. This leads to a kernel panic due to a null pointer dereference: [ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8 [ 8.156982] #PF: supervisor write access in kernel mode [ 8.156984] #PF: error_code(0x0002) - not-present page [ 8.156986] PGD 0 P4D 0 ... [ 8.180668] RIP: 0010:mutex_lock+0x19/0x30 [ 8.188624] Call Trace: [ 8.188629] ? __die_body.cold+0x1a/0x1f [ 8.195260] ? page_fault_oops+0x15c/0x290 [ 8.209183] ? __irq_resolve_mapping+0x47/0x80 [ 8.209187] ? exc_page_fault+0x64/0x140 [ 8.209190] ? asm_exc_page_fault+0x22/0x30 [ 8.209196] ? mutex_lock+0x19/0x30 [ 8.223116] uart_add_one_port+0x60/0x440 [ 8.223122] ? proc_tty_register_driver+0x43/0x50 [ 8.223126] ? tty_register_driver+0x1ca/0x1e0 [ 8.246250] ulite_probe+0x357/0x4b0 [uartlite] To prevent it, move uart driver registration in to init function. This will ensure that uart_driver is always registered when probe function is called. Signed-off-by: Jakub Lewalski <jakub.lewalski@nokia.com> Signed-off-by: Elodie Decerle <elodie.decerle@nokia.com> Link: https://lore.kernel.org/r/20250331160732.2042-1-elodie.decerle@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27vt: remove VT_RESIZE and VT_RESIZEX from vt_compat_ioctl()Nicolas Pitre1-2/+0
[ Upstream commit c4c7ead7b86c1e7f11c64915b7e5bb6d2e242691 ] They are listed amon those cmd values that "treat 'arg' as an integer" which is wrong. They should instead fall into the default case. Probably nobody ever relied on that code since 2009 but still. Fixes: e92166517e3c ("tty: handle VT specific compat ioctls in vt driver") Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/pr214s15-36r8-6732-2pop-159nq85o48r7@syhkavp.arg Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27serial: Fix potential null-ptr-deref in mlb_usio_probe()Henry Martin1-1/+4
[ Upstream commit 86bcae88c9209e334b2f8c252f4cc66beb261886 ] devm_ioremap() can return NULL on error. Currently, mlb_usio_probe() does not check for this case, which could result in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue. Fixes: ba44dc043004 ("serial: Add Milbeaut serial control") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://lore.kernel.org/r/20250403070339.64990-1-bsdhenrymartin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02serial: sifive: lock port in startup()/shutdown() callbacksRyo Takakura1-0/+6
commit e1ca3ff28ab1e2c1e70713ef3fa7943c725742c3 upstream. startup()/shutdown() callbacks access SIFIVE_SERIAL_IE_OFFS. The register is also accessed from write() callback. If console were printing and startup()/shutdown() callback gets called, its access to the register could be overwritten. Add port->lock to startup()/shutdown() callbacks to make sure their access to SIFIVE_SERIAL_IE_OFFS is synchronized against write() callback. Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART") Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: stable@vger.kernel.org Reviewed-by: John Ogness <john.ogness@linutronix.de> Rule: add Link: https://lore.kernel.org/stable/20250330003522.386632-1-ryotkkr98%40gmail.com Link: https://lore.kernel.org/r/20250412001847.183221-1-ryotkkr98@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-10serial: 8250_dma: terminate correct DMA in tx_dma_flush()John Keeping1-1/+1
commit a26503092c75abba70a0be2aa01145ecf90c2a22 upstream. When flushing transmit side DMA, it is the transmit channel that should be terminated, not the receive channel. Fixes: 9e512eaaf8f40 ("serial: 8250: Fix fifo underflow on flush") Cc: stable <stable@kernel.org> Reported-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20250224121831.1429323-1-jkeeping@inmusicbrands.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-10tty: serial: 8250: Add some more device IDsCameron Williams1-0/+16
commit be6a23650908e2f827f2e7839a3fbae41ccb5b63 upstream. These card IDs got missed the first time around. Cc: stable <stable@kernel.org> Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DB7PR02MB380295BCC879CCF91315AC38C4C12@DB7PR02MB3802.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13serial: 8250_pci: add support for ASIX AX99100Jiaqing Zhao1-0/+10
commit 0b32216557ce3b2a468d1282d99b428bf72ff532 upstream. Each of the 4 PCI functions on ASIX AX99100 PCIe to Multi I/O Controller can be configured as a single-port serial port controller. The subvendor id is 0x1000 when configured as serial port and MSI interrupts are supported. Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230724083933.3173513-4-jiaqing.zhao@linux.intel.com Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13serial: 8250: Fix fifo underflow on flushJohn Keeping3-0/+27
commit 9e512eaaf8f4008c44ede3dfc0fbc9d9c5118583 upstream. When flushing the serial port's buffer, uart_flush_buffer() calls kfifo_reset() but if there is an outstanding DMA transfer then the completion function will consume data from the kfifo via uart_xmit_advance(), underflowing and leading to ongoing DMA as the driver tries to transmit another 2^32 bytes. This is readily reproduced with serial-generic and amidi sending even short messages as closing the device on exit will wait for the fifo to drain and in the underflow case amidi hangs for 30 seconds on exit in tty_wait_until_sent(). A trace of that gives: kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3 amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3 irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293 irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096 irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197 irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096 irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101 irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096 Since the port lock is held in when the kfifo is reset in uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer hook to adjust the outstanding DMA byte count is sufficient to avoid the kfifo underflow. Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Cc: stable <stable@kernel.org> Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is ↵Claudiu Beznea1-0/+23
in use commit 9f7dea875cc7f9c1a56a5c688290634a59cd1420 upstream. In the sh-sci driver, sci_ports[0] is used by earlycon. If the earlycon is still active when sci_probe() is called and the new serial port is supposed to map to sci_ports[0], return -EBUSY to prevent breaking the earlycon. This situation should occurs in debug scenarios, and users should be aware of the potential conflict. Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Cc: stable@vger.kernel.org Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250116182249.3828577-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13serial: sh-sci: Drop __initdata macro for port_cfgClaudiu Beznea1-1/+1
commit eaeee4225dba30bef4d424bdf134a07b7f423e8b upstream. The port_cfg object is used by serial_console_write(), which serves as the write function for the earlycon device. Marking port_cfg as __initdata causes it to be freed after kernel initialization, resulting in earlycon becoming unavailable thereafter. Remove the __initdata macro from port_cfg to resolve this issue. Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Cc: stable@vger.kernel.org Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Fixes: 0b0cced19ab15c9e ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Link: https://lore.kernel.org/r/20250116182249.3828577-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14serial: 8250: omap: Move pm_runtime_get_syncBin Liu1-2/+2
commit bcc7ba668818dcadd2f1db66b39ed860a63ecf97 upstream. Currently in omap_8250_shutdown, the dma->rx_running flag is set to zero in omap_8250_rx_dma_flush. Next pm_runtime_get_sync is called, which is a runtime resume call stack which can re-set the flag. When the call omap_8250_shutdown returns, the flag is expected to be UN-SET, but this is not the case. This is causing issues the next time UART is re-opened and omap_8250_rx_dma is called. Fix by moving pm_runtime_get_sync before the omap_8250_rx_dma_flush. cc: stable@vger.kernel.org Fixes: 0e31c8d173ab ("tty: serial: 8250_omap: add custom DMA-RX callback") Signed-off-by: Bin Liu <b-liu@ti.com> [Judith: Add commit message] Signed-off-by: Judith Mendez <jm@ti.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20241031172315.453750-1-jm@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"Greg Kroah-Hartman1-28/+0
commit 718632467d88e98816fa01ab12681ef1c2aa56f8 upstream. This reverts commit 3791ea69a4858b81e0277f695ca40f5aae40f312. It was reported to cause boot-time issues, so revert it for now. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 3791ea69a485 ("serial: sh-sci: Clean sci_ports[0] after at earlycon exit") Cc: stable <stable@kernel.org> Cc: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14serial: sh-sci: Clean sci_ports[0] after at earlycon exitClaudiu Beznea1-0/+28
commit 3791ea69a4858b81e0277f695ca40f5aae40f312 upstream. The early_console_setup() function initializes the sci_ports[0].port with an object of type struct uart_port obtained from the object of type struct earlycon_device received as argument by the early_console_setup(). It may happen that later, when the rest of the serial ports are probed, the serial port that was used as earlycon (e.g., port A) to be mapped to a different position in sci_ports[] and the slot 0 to be used by a different serial port (e.g., port B), as follows: sci_ports[0] = port A sci_ports[X] = port B In this case, the new port mapped at index zero will have associated data that was used for earlycon. In case this happens, after Linux boot, any access to the serial port that maps on sci_ports[0] (port A) will block the serial port that was used as earlycon (port B). To fix this, add early_console_exit() that clean the sci_ports[0] at earlycon exit time. Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Cc: stable@vger.kernel.org Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20241106120118.1719888-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handlerNicolas Bouchinet1-1/+1
commit 635a9fca54f4f4148be1ae1c7c6bd37af80f5773 upstream. Commit 7c0cca7c847e ("tty: ldisc: add sysctl to prevent autoloading of ldiscs") introduces the tty_ldisc_autoload sysctl with the wrong proc_handler. .extra1 and .extra2 parameters are set to avoid other values thant SYSCTL_ZERO or SYSCTL_ONE to be set but proc_dointvec do not uses them. This commit fixes this by using proc_dointvec_minmax instead of proc_dointvec. Fixes: 7c0cca7c847e ("tty: ldisc: add sysctl to prevent autoloading of ldiscs") Cc: stable <stable@kernel.org> Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr> Reviewed-by: Lin Feng <linf@wangsu.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20241112131357.49582-4-nicolas.bouchinet@clip-os.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-08vt: prevent kernel-infoleak in con_font_get()Jeongjun Park1-1/+1
commit f956052e00de211b5c9ebaa1958366c23f82ee9e upstream. font.data may not initialize all memory spaces depending on the implementation of vc->vc_sw->con_font_get. This may cause info-leak, so to prevent this, it is safest to modify it to initialize the allocated memory space to 0, and it generally does not affect the overall performance of the system. Cc: stable@vger.kernel.org Reported-by: syzbot+955da2d57931604ee691@syzkaller.appspotmail.com Fixes: 05e2600cb0a4 ("VT: Bump font size limitation to 64x128 pixels") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Link: https://lore.kernel.org/r/20241010174619.59662-1-aha310510@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-08tty: rp2: Fix reset with non forgiving PCIe host bridgesFlorian Fainelli1-1/+1
commit f16dd10ba342c429b1e36ada545fb36d4d1f0e63 upstream. The write to RP2_GLOBAL_CMD followed by an immediate read of RP2_GLOBAL_CMD in rp2_reset_asic() is intented to flush out the write, however by then the device is already in reset and cannot respond to a memory cycle access. On platforms such as the Raspberry Pi 4 and others using the pcie-brcmstb.c driver, any memory access to a device that cannot respond is met with a fatal system error, rather than being substituted with all 1s as is usually the case on PC platforms. Swapping the delay and the read ensures that the device has finished resetting before we attempt to read from it. Fixes: 7d9f49afa451 ("serial: rp2: New driver for Comtrol RocketPort 2 cards") Cc: stable <stable@kernel.org> Suggested-by: Jim Quinlan <james.quinlan@broadcom.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240906225435.707837-1-florian.fainelli@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-19serial: core: check uartclk for zero to avoid divide by zeroGeorge Kennedy1-0/+8
commit 6eabce6608d6f3440f4c03aa3d3ef50a47a3d193 upstream. Calling ioctl TIOCSSERIAL with an invalid baud_base can result in uartclk being zero, which will result in a divide by zero error in uart_get_divisor(). The check for uartclk being zero in uart_set_info() needs to be done before other settings are made as subsequent calls to ioctl TIOCSSERIAL for the same port would be impacted if the uartclk check was done where uartclk gets set. Oops: divide error: 0000 PREEMPT SMP KASAN PTI RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580) Call Trace: <TASK> serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576 drivers/tty/serial/8250/8250_port.c:2589) serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502 drivers/tty/serial/8250/8250_port.c:2741) serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862) uart_change_line_settings (./include/linux/spinlock.h:376 ./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222) uart_port_startup (drivers/tty/serial/serial_core.c:342) uart_startup (drivers/tty/serial/serial_core.c:368) uart_set_info (drivers/tty/serial/serial_core.c:1034) uart_set_info_user (drivers/tty/serial/serial_core.c:1059) tty_set_serial (drivers/tty/tty_io.c:2637) tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791) __x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907 fs/ioctl.c:893 fs/ioctl.c:893) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Reported-by: syzkaller <syzkaller@googlegroups.com> Cc: stable@vger.kernel.org Signed-off-by: George Kennedy <george.kennedy@oracle.com> Rule: add Link: https://lore.kernel.org/stable/1721148848-9784-1-git-send-email-george.kennedy%40oracle.com Link: https://lore.kernel.org/r/1721219078-3209-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-05tty: mcf: MCF54418 has 10 UARTSJean-Michel Hautbois1-1/+1
commit 7c92a8bd53f24d50c8cf4aba53bb75505b382fed upstream. Most of the colfires have up to 5 UARTs but MCF54418 has up-to 10 ! Change the maximum value authorized. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org> Cc: stable <stable@kernel.org> Fixes: 2545cf6e94b4 ("m68knommu: allow 4 coldfire serial ports") Link: https://lore.kernel.org/r/20240620-upstream-uart-v1-1-a9d0d95fb19e@yoseli.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-05serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescalerHugo Villeneuve1-5/+18
[ Upstream commit 8492bd91aa055907c67ef04f2b56f6dadd1f44bf ] When using a high speed clock with a low baud rate, the 4x prescaler is automatically selected if required. In that case, sc16is7xx_set_baud() properly configures the chip registers, but returns an incorrect baud rate by not taking into account the prescaler value. This incorrect baud rate is then fed to uart_update_timeout(). For example, with an input clock of 80MHz, and a selected baud rate of 50, sc16is7xx_set_baud() will return 200 instead of 50. Fix this by first changing the prescaler variable to hold the selected prescaler value instead of the MCR bitfield. Then properly take into account the selected prescaler value in the return value computation. Also add better documentation about the divisor value computation. Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20240430200431.4102923-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-05serial: sc16is7xx: replace hardcoded divisor value with BIT() macroHugo Villeneuve1-1/+1
[ Upstream commit 2e57cefc4477659527f7adab1f87cdbf60ef1ae6 ] To better show why the limit is what it is, since we have only 16 bits for the divisor. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-13-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 8492bd91aa05 ("serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16serial: sh-sci: protect invalidating RXDMA on shutdownWolfram Sang1-0/+5
[ Upstream commit aae20f6e34cd0cbd67a1d0e5877561c40109a81b ] The to-be-fixed commit removed locking when invalidating the DMA RX descriptors on shutdown. It overlooked that there is still a rx_timer running which may still access the protected data. So, re-add the locking. Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Closes: https://lore.kernel.org/r/ee6c9e16-9f29-450e-81da-4a8dceaa8fc7@de.bosch.com Fixes: 2c4ee23530ff ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240506114016.30498-7-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16serial: max3100: Fix bitwise typesAndy Shevchenko1-1/+4
[ Upstream commit e60955dbecb97f080848a57524827e2db29c70fd ] Sparse is not happy about misuse of bitwise types: .../max3100.c:194:13: warning: incorrect type in assignment (different base types) .../max3100.c:194:13: expected unsigned short [addressable] [usertype] etx .../max3100.c:194:13: got restricted __be16 [usertype] .../max3100.c:202:15: warning: cast to restricted __be16 Fix this by choosing proper types for the respective variables. Fixes: 7831d56b0a35 ("tty: MAX3100") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240402195306.269276-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16serial: max3100: Update uart_driver_registered on driver removalAndy Shevchenko1-1/+3
[ Upstream commit 712a1fcb38dc7cac6da63ee79a88708fbf9c45ec ] The removal of the last MAX3100 device triggers the removal of the driver. However, code doesn't update the respective global variable and after insmod — rmmod — insmod cycle the kernel oopses: max3100 spi-PRP0001:01: max3100_probe: adding port 0 BUG: kernel NULL pointer dereference, address: 0000000000000408 ... RIP: 0010:serial_core_register_port+0xa0/0x840 ... max3100_probe+0x1b6/0x280 [max3100] spi_probe+0x8d/0xb0 Update the actual state so next time UART driver will be registered again. Hugo also noticed, that the error path in the probe also affected by having the variable set, and not cleared. Instead of clearing it move the assignment after the successfull uart_register_driver() call. Fixes: 7831d56b0a35 ("tty: MAX3100") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240402195306.269276-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16serial: max3100: Lock port->lock when calling uart_handle_cts_change()Andy Shevchenko1-1/+12
[ Upstream commit 77ab53371a2066fdf9b895246505f5ef5a4b5d47 ] uart_handle_cts_change() has to be called with port lock taken, Since we run it in a separate work, the lock may not be taken at the time of running. Make sure that it's taken by explicitly doing that. Without it we got a splat: WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0 ... Workqueue: max3100-0 max3100_work [max3100] RIP: 0010:uart_handle_cts_change+0xa6/0xb0 ... max3100_handlerx+0xc5/0x110 [max3100] max3100_work+0x12a/0x340 [max3100] Fixes: 7831d56b0a35 ("tty: MAX3100") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240402195306.269276-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16tty: n_gsm: fix possible out-of-bounds in gsm0_receive()Daniel Starke1-2/+6
commit 47388e807f85948eefc403a8a5fdc5b406a65d5a upstream. Assuming the following: - side A configures the n_gsm in basic option mode - side B sends the header of a basic option mode frame with data length 1 - side A switches to advanced option mode - side B sends 2 data bytes which exceeds gsm->len Reason: gsm->len is not used in advanced option mode. - side A switches to basic option mode - side B keeps sending until gsm0_receive() writes past gsm->buf Reason: Neither gsm->state nor gsm->len have been reset after reconfiguration. Fix this by changing gsm->count to gsm->len comparison from equal to less than. Also add upper limit checks against the constant MAX_MRU in gsm0_receive() and gsm1_receive() to harden against memory corruption of gsm->len and gsm->mru. All other checks remain as we still need to limit the data according to the user configuration and actual payload size. Reported-by: j51569436@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218708 Tested-by: j51569436@gmail.com Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20240424054842.7741-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-25serial: kgdboc: Fix NMI-safety problems from keyboard reset codeDaniel Thompson1-1/+29
commit b2aba15ad6f908d1a620fd97f6af5620c3639742 upstream. Currently, when kdb is compiled with keyboard support, then we will use schedule_work() to provoke reset of the keyboard status. Unfortunately schedule_work() gets called from the kgdboc post-debug-exception handler. That risks deadlock since schedule_work() is not NMI-safe and, even on platforms where the NMI is not directly used for debugging, the debug trap can have NMI-like behaviour depending on where breakpoints are placed. Fix this by using the irq work system, which is NMI-safe, to defer the call to schedule_work() to a point when it is safe to call. Reported-by: Liuye <liu.yeC@h3c.com> Closes: https://lore.kernel.org/all/20240228025602.3087748-1-liu.yeC@h3c.com/ Cc: stable@vger.kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240424-kgdboc_fix_schedule_work-v2-1-50f5a490aec5@linaro.org Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-02serial: mxs-auart: add spinlock around changing cts stateEmil Kronborg1-2/+6
[ Upstream commit 54c4ec5f8c471b7c1137a1f769648549c423c026 ] The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec [ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs [ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1 [ 85.151396] Hardware name: Freescale MXS (Device Tree) [ 85.156679] Workqueue: hci0 hci_power_on [bluetooth] (...) [ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4 [ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210 (...) Cc: stable@vger.kernel.org Fixes: 4d90bb147ef6 ("serial: core: Document and assert lock requirements for irq helpers") Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com> Link: https://lore.kernel.org/r/20240320121530.11348-1-emil.kronborg@protonmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02serial/pmac_zilog: Remove flawed mitigation for rx irq floodFinn Thain1-14/+0
commit 1be3226445362bfbf461c92a5bcdb1723f2e4907 upstream. The mitigation was intended to stop the irq completely. That may be better than a hard lock-up but it turns out that you get a crash anyway if you're using pmac_zilog as a serial console: ttyPZ0: pmz: rx irq flood ! BUG: spinlock recursion on CPU#0, swapper/0 That's because the pr_err() call in pmz_receive_chars() results in pmz_console_write() attempting to lock a spinlock already locked in pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal BUG splat. The spinlock in question is the one in struct uart_port. Even when it's not fatal, the serial port rx function ceases to work. Also, the iteration limit doesn't play nicely with QEMU, as can be seen in the bug report linked below. A web search for other reports of the error message "pmz: rx irq flood" didn't produce anything. So I don't think this code is needed any more. Remove it. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@kernel.org Cc: linux-m68k@lists.linux-m68k.org Link: https://github.com/vivier/qemu-m68k/issues/44 Link: https://lore.kernel.org/all/1078874617.9746.36.camel@gaston/ Acked-by: Michael Ellerman <mpe@ellerman.id.au> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@kernel.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/e853cf2c762f23101cd2ddec0cc0c2be0e72685f.1712568223.git.fthain@linux-m68k.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13tty: n_gsm: require CAP_NET_ADMIN to attach N_GSM0710 ldiscThadeu Lima de Souza Cascardo1-0/+3
commit 67c37756898a5a6b2941a13ae7260c89b54e0d88 upstream. Any unprivileged user can attach N_GSM0710 ldisc, but it requires CAP_NET_ADMIN to create a GSM network anyway. Require initial namespace CAP_NET_ADMIN to do that. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Link: https://lore.kernel.org/r/20230731185942.279611-1-cascardo@canonical.com Cc: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13vt: fix memory overlapping when deleting chars in the bufferYangxi Xiang1-1/+1
commit 39cdb68c64d84e71a4a717000b6e5de208ee60cc upstream. A memory overlapping copy occurs when deleting a long line. This memory overlapping copy can cause data corruption when scr_memcpyw is optimized to memcpy because memcpy does not ensure its behavior if the destination buffer overlaps with the source buffer. The line buffer is not always broken, because the memcpy utilizes the hardware acceleration, whose result is not deterministic. Fix this problem by using replacing the scr_memcpyw with scr_memmovew. Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition") Cc: stable <stable@kernel.org> Signed-off-by: Yangxi Xiang <xyangxi5@gmail.com> Link: https://lore.kernel.org/r/20220628093322.5688-1-xyangxi5@gmail.com [ KN: vc_state is not a separate structure in LTS v4.19, v5.4. Adjusted the patch accordingly by using vc_x instead of state.x for backport. ] Signed-off-by: Kuntal Nayak <kuntal.nayak@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13vt: fix unicode buffer corruption when deleting charactersNicolas Pitre1-1/+1
commit 1581dafaf0d34bc9c428a794a22110d7046d186d upstream. This is the same issue that was fixed for the VGA text buffer in commit 39cdb68c64d8 ("vt: fix memory overlapping when deleting chars in the buffer"). The cure is also the same i.e. replace memcpy() with memmove() due to the overlaping buffers. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/sn184on2-3p0q-0qrq-0218-895349s4753o@syhkavp.arg Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabledSherry Sun1-2/+5
commit 74cb7e0355fae9641f825afa389d3fba3b617714 upstream. If the remote uart device is not connected or not enabled after booting up, the CTS line is high by default. At this time, if we enable the flow control when opening the device(for example, using “stty -F /dev/ttyLP4 crtscts” command), there will be a pending idle preamble(first writing 0 and then writing 1 to UARTCTRL_TE will queue an idle preamble) that cannot be sent out, resulting in the uart port fail to close(waiting for TX empty), so the user space stty will have to wait for a long time or forever. This is an LPUART IP bug(idle preamble has higher priority than CTS), here add a workaround patch to enable TX CTS after enabling UARTCTRL_TE, so that the idle preamble does not get stuck due to CTS is deasserted. Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20240305015706.1050769-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13serial: max310x: fix NULL pointer dereference in I2C instantiationHugo Villeneuve1-2/+5
[ Upstream commit 0d27056c24efd3d63a03f3edfbcfc4827086b110 ] When trying to instantiate a max14830 device from userspace: echo max14830 0x60 > /sys/bus/i2c/devices/i2c-2/new_device we get the following error: Unable to handle kernel NULL pointer dereference at virtual address... ... Call trace: max310x_i2c_probe+0x48/0x170 [max310x] i2c_device_probe+0x150/0x2a0 ... Add check for validity of devtype to prevent the error, and abort probe with a meaningful error message. Fixes: 2e1f2d9a9bdb ("serial: max310x: implement I2C support") Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240118152213.2644269-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27serial: 8250_exar: Don't remove GPIO device on suspendAndy Shevchenko1-4/+1
[ Upstream commit 73b5a5c00be39e23b194bad10e1ea8bb73eee176 ] It seems a copy&paste mistake that suspend callback removes the GPIO device. There is no counterpart of this action, means once suspended there is no more GPIO device available untile full unbind-bind cycle is performed. Remove suspicious GPIO device removal in suspend. Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240219150627.2101198-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMTTudor Ambarus1-3/+2
[ Upstream commit 314c2b399288f0058a8c5b6683292cbde5f1531b ] The core expects for tx_empty() either TIOCSER_TEMT when the tx is empty or 0 otherwise. s3c24xx_serial_txempty_nofifo() might return 0x4, and at least uart_get_lsr_info() tries to clear exactly TIOCSER_TEMT (BIT(1)). Fix tx_empty() to return TIOCSER_TEMT. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20240119104526.1221243-2-tudor.ambarus@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27serial: max310x: fix syntax error in IRQ error messageHugo Villeneuve1-1/+1
[ Upstream commit 8ede8c6f474255b2213cccd7997b993272a8e2f9 ] Replace g with q. Helpful when grepping thru source code or logs for "request" keyword. Fixes: f65444187a66 ("serial: New serial driver MAX310X") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240118152213.2644269-6-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27tty: vt: fix 20 vs 0x20 typo in EScsiignoreJiri Slaby (SUSE)1-1/+1
[ Upstream commit 0e6a92f67c8a94707f7bb27ac29e2bdf3e7c167d ] The if (c >= 20 && c <= 0x3f) test added in commit 7a99565f8732 is wrong. 20 is DC4 in ascii and it makes no sense to consider that as the bottom limit. Instead, it should be 0x20 as in the other test in the commit above. This is supposed to NOT change anything as we handle interesting 20-0x20 asciis far before this if. So for sakeness, change to 0x20 (which is SPACE). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Fixes: 7a99565f8732 ("vt: ignore csi sequences with intermediate characters.") Cc: Martin Hostettler <textshell@uchuujin.de> Link: https://lore.kernel.org/all/ZaP45QY2WEsDqoxg@neutronstar.dyndns.org/ Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15serial: max310x: fix IO data corruption in batched operationsJan Kundrát1-2/+15
[ Upstream commit 3f42b142ea1171967e40e10e4b0241c0d6d28d41 ] After upgrading from 5.16 to 6.1, our board with a MAX14830 started producing lots of garbage data over UART. Bisection pointed out commit 285e76fc049c as the culprit. That patch tried to replace hand-written code which I added in 2b4bac48c1084 ("serial: max310x: Use batched reads when reasonably safe") with the generic regmap infrastructure for batched operations. Unfortunately, the `regmap_raw_read` and `regmap_raw_write` which were used are actually functions which perform IO over *multiple* registers. That's not what is needed for accessing these Tx/Rx FIFOs; the appropriate functions are the `_noinc_` versions, not the `_raw_` ones. Fix this regression by using `regmap_noinc_read()` and `regmap_noinc_write()` along with the necessary `regmap_config` setup; with this patch in place, our board communicates happily again. Since our board uses SPI for talking to this chip, the I2C part is completely untested. Fixes: 285e76fc049c ("serial: max310x: use regmap methods for SPI batch operations") Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/79db8e82aadb0e174bc82b9996423c3503c8fb37.1680732084.git.jan.kundrat@cesnet.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15serial: max310x: implement I2C supportCosmin Tanislav2-1/+135
[ Upstream commit 2e1f2d9a9bdbe12ee475c82a45ac46a278e8049a ] I2C implementation on this chip has a few key differences compared to SPI, as described in previous patches. * extended register space access needs no extra logic * slave address is used to select which UART to communicate with To accommodate these differences, add an I2C interface config, set the RevID register address and implement an empty method for setting the GlobalCommand register, since no special handling is needed for the extended register space. To handle the port-specific slave address, create an I2C dummy device for each port, except the base one (UART0), which is expected to be the one specified in firmware, and create a regmap for each I2C device. Add minimum and maximum slave addresses to each devtype for sanity checking. Also, use a separate regmap config with no write_flag_mask, since I2C has a R/W bit in its slave address, and set the max register to the address of the RevID register, since the extended register space needs no extra logic. Finally, add the I2C driver. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20220605144659.4169853-5-demonsingur@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 3f42b142ea11 ("serial: max310x: fix IO data corruption in batched operations") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15serial: max310x: make accessing revision id interface-agnosticCosmin Tanislav1-10/+30
[ Upstream commit b3883ab5e95713e479f774ea68be275413e8e5b2 ] SPI can only use 5 address bits, since one bit is reserved for specifying R/W and 2 bits are used to specify the UART port. To access registers that have addresses past 0x1F, an extended register space can be enabled by writing to the GlobalCommand register (address 0x1F). I2C uses 8 address bits. The R/W bit is placed in the slave address, and so is the UART port. Because of this, registers that have addresses higher than 0x1F can be accessed normally. To access the RevID register, on SPI, 0xCE must be written to the 0x1F address to enable the extended register space, after which the RevID register is accessible at address 0x5. 0xCD must be written to the 0x1F address to disable the extended register space. On I2C, the RevID register is accessible at address 0x25. Create an interface config struct, and add a method for toggling the extended register space and a member for the RevId register address. Implement these for SPI. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20220605144659.4169853-4-demonsingur@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 3f42b142ea11 ("serial: max310x: fix IO data corruption in batched operations") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15serial: max310x: Unprepare and disable clock in error pathAndy Shevchenko1-1/+2
[ Upstream commit 61acabaae5ba58b3c32e6e90d24c2c0827fd27a8 ] In one error case the clock may be left prepared and enabled. Unprepare and disable clock in that case to balance state of the hardware. Fixes: d4d6f03c4fb3 ("serial: max310x: Try to get crystal clock rate from property") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210625153733.12911-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15serial: max310x: prevent infinite while() loop in port startupHugo Villeneuve1-2/+18
[ Upstream commit b35f8dbbce818b02c730dc85133dc7754266e084 ] If there is a problem after resetting a port, the do/while() loop that checks the default value of DIVLSB register may run forever and spam the I2C bus. Add a delay before each read of DIVLSB, and a maximum number of tries to prevent that situation from happening. Also fail probe if port reset is unsuccessful. Fixes: 10d8b34a4217 ("serial: max310x: Driver rework") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15serial: max310x: use a separate regmap for each portCosmin Tanislav1-32/+36
[ Upstream commit 6ef281daf020592c219fa91780abc381c6c20db5 ] The driver currently does manual register manipulation in multiple places to talk to a specific UART port. In order to talk to a specific UART port over SPI, the bits U1 and U0 of the register address can be set, as explained in the Command byte configuration section of the datasheet. Make this more elegant by creating regmaps for each UART port and setting the read_flag_mask and write_flag_mask accordingly. All communcations regarding global registers are done on UART port 0, so replace the global regmap entirely with the port 0 regmap. Also, remove the 0x1f masks from reg_writeable(), reg_volatile() and reg_precious() methods, since setting the U1 and U0 bits of the register address happens inside the regmap core now. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20220605144659.4169853-3-demonsingur@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: b35f8dbbce81 ("serial: max310x: prevent infinite while() loop in port startup") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15serial: max310x: use regmap methods for SPI batch operationsCosmin Tanislav1-28/+8
[ Upstream commit 285e76fc049c4d32c772eea9460a7ef28a193802 ] The SPI batch read/write operations can be implemented as simple regmap raw read and write, which will also try to do a gather write just as it is done here. Use the regmap raw read and write methods. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20220605144659.4169853-2-demonsingur@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: b35f8dbbce81 ("serial: max310x: prevent infinite while() loop in port startup") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15serial: max310x: Make use of device propertiesAndy Shevchenko1-18/+9
[ Upstream commit c808fab604ca62cff19ee6b261211483830807aa ] Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201007084635.594991-1-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: b35f8dbbce81 ("serial: max310x: prevent infinite while() loop in port startup") Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-21 07:45:44 +0300