summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2017-12-09sysrq : fix Show Regs call trace on ARMJibin Xu1-2/+7
[ Upstream commit b00bebbc301c8e1f74f230dc82282e56b7e7a6db ] When kernel configuration SMP,PREEMPT and DEBUG_PREEMPT are enabled, echo 1 >/proc/sys/kernel/sysrq echo p >/proc/sysrq-trigger kernel will print call trace as below: sysrq: SysRq : Show Regs BUG: using __this_cpu_read() in preemptible [00000000] code: sh/435 caller is __this_cpu_preempt_check+0x18/0x20 Call trace: [<ffffff8008088e80>] dump_backtrace+0x0/0x1d0 [<ffffff8008089074>] show_stack+0x24/0x30 [<ffffff8008447970>] dump_stack+0x90/0xb0 [<ffffff8008463950>] check_preemption_disabled+0x100/0x108 [<ffffff8008463998>] __this_cpu_preempt_check+0x18/0x20 [<ffffff80084c9194>] sysrq_handle_showregs+0x1c/0x40 [<ffffff80084c9c7c>] __handle_sysrq+0x12c/0x1a0 [<ffffff80084ca140>] write_sysrq_trigger+0x60/0x70 [<ffffff8008251e00>] proc_reg_write+0x90/0xd0 [<ffffff80081f1788>] __vfs_write+0x48/0x90 [<ffffff80081f241c>] vfs_write+0xa4/0x190 [<ffffff80081f3354>] SyS_write+0x54/0xb0 [<ffffff80080833f0>] el0_svc_naked+0x24/0x28 This can be seen on a common board like an r-pi3. This happens because when echo p >/proc/sysrq-trigger, get_irq_regs() is called outside of IRQ context, if preemption is enabled in this situation,kernel will print the call trace. Since many prior discussions on the mailing lists have made it clear that get_irq_regs either just returns NULL or stale data when used outside of IRQ context,we simply avoid calling it outside of IRQ context. Signed-off-by: Jibin Xu <jibin.xu@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09serial: 8250: Preserve DLD[7:4] for PORT_XR17V35XAaron Sierra1-1/+4
[ Upstream commit 0ab84da2e076948c49d36197ee7d254125c53eab ] The upper four bits of the XR17V35x fractional divisor register (DLD) control general chip function (RS-485 direction pin polarity, multidrop mode, XON/XOFF parity check, and fast IR mode). Don't allow these bits to be clobbered when setting the baudrate. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()Lukas Wunner1-1/+1
[ Upstream commit 3236a965486ba0c6043cf2c7b51943d8b382ae29 ] This driver's ->rs485_config callback checks if SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND have the same value. If they do, it means the user has passed in invalid data with the TIOCSRS485 ioctl() since RTS must have a different polarity when sending and when not sending. In this case, rs485 mode is not enabled (the RS485_URA bit is not set in the RS485 Enable Register) and this is supposed to be signaled back to the user by clearing the SER_RS485_ENABLED bit in struct serial_rs485 ... except a missing tilde character is preventing that from happening. Fixes: 28e3fb6c4dce ("serial: Add support for Fintek F81216A LPC to 4 UART") Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: "Ji-Ze Hong (Peter Hong)" <hpeter@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09serial: 8250_pci: Add Amazon PCI serial device IDMatt Wilson1-0/+3
commit 3bfd1300abfe3adb18e84a89d97a0e82a22124bb upstream. This device will be used in future Amazon EC2 instances as the primary serial port (i.e., data sent to this port will be available via the GetConsoleOuput [1] EC2 API). [1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.html Signed-off-by: Matt Wilson <msw@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24serial: omap: Fix EFR write on RTS deassertionLukas Wunner1-1/+1
commit 2a71de2f7366fb1aec632116d0549ec56d6a3940 upstream. Commit 348f9bb31c56 ("serial: omap: Fix RTS handling") sought to enable auto RTS upon manual RTS assertion and disable it on deassertion. However it seems the latter was done incorrectly, it clears all bits in the Extended Features Register *except* auto RTS. Fixes: 348f9bb31c56 ("serial: omap: Fix RTS handling") Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15serial: sh-sci: Fix register offsets for the IRDA serial portLaurent Pinchart1-9/+8
[ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ] Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the registers offset in the driver and the platform data regshift value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21Revert "tty: goldfish: Fix a parameter of a call to free_irq"Greg Kroah-Hartman1-1/+1
This reverts commit 01b3db29ba1edd79b9c3e7cd294739b70257d278 which is commit 1a5c2d1de7d35f5eb9793266237903348989502b upstream. Ben writes: This fixes a bug introduced in 4.6 by commit 465893e18878 "tty: goldfish: support platform_device with id -1". For earlier kernel versions, it *introduces* a bug. So let's drop it. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
2017-10-21sparc64: Migrate hvcons irq to panicked cpuVijay Kumar1-0/+6
[ Upstream commit 7dd4fcf5b70694dc961eb6b954673e4fc9730dbd ] On panic, all other CPUs are stopped except the one which had hit panic. To keep console alive, we need to migrate hvcons irq to panicked CPU. Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08tty: goldfish: Fix a parameter of a call to free_irqChristophe JAILLET1-1/+1
[ Upstream commit 1a5c2d1de7d35f5eb9793266237903348989502b ] 'request_irq()' and 'free_irq()' should be called with the same dev_id. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27tty: fix __tty_insert_flip_char regressionArnd Bergmann1-1/+2
commit 8a5a90a2a477b86a3dc2eaa5a706db9bfdd647ca upstream. Sergey noticed a small but fatal mistake in __tty_insert_flip_char, leading to an oops in an interrupt handler when using any serial port. The problem is that I accidentally took the tty_buffer pointer before calling __tty_buffer_request_room(), which replaces the buffer. This moves the pointer lookup to the right place after allocating the new buffer space. Fixes: 979990c62848 ("tty: improve tty_insert_flip_char() fast path") Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27tty: improve tty_insert_flip_char() slow pathArnd Bergmann1-2/+3
commit 065ea0a7afd64d6cf3464bdd1d8cd227527e2045 upstream. While working on improving the fast path of tty_insert_flip_char(), I noticed that by calling tty_buffer_request_room(), we needlessly move to the separate flag buffer mode for the tty, even when all characters use TTY_NORMAL as the flag. This changes the code to call __tty_buffer_request_room() with the correct flag, which will then allocate a regular buffer when it rounds out of space but no special flags have been used. I'm guessing that this is the behavior that Peter Hurley intended when he introduced the compacted flip buffers. Fixes: acc0f67f307f ("tty: Halve flip buffer GFP_ATOMIC memory consumption") Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27tty: improve tty_insert_flip_char() fast pathArnd Bergmann1-0/+24
commit 979990c6284814617d8f2179d197f72ff62b5d85 upstream. kernelci.org reports a crazy stack usage for the VT code when CONFIG_KASAN is enabled: drivers/tty/vt/keyboard.c: In function 'kbd_keycode': drivers/tty/vt/keyboard.c:1452:1: error: the frame size of 2240 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] The problem is that tty_insert_flip_char() gets inlined many times into kbd_keycode(), and also into other functions, and each copy requires 128 bytes for stack redzone to check for a possible out-of-bounds access on the 'ch' and 'flags' arguments that are passed into tty_insert_flip_string_flags as a variable-length string. This introduces a new __tty_insert_flip_char() function for the slow path, which receives the two arguments by value. This completely avoids the problem and the stack usage goes back down to around 100 bytes. Without KASAN, this is also slightly better, as we don't have to spill the arguments to the stack but can simply pass 'ch' and 'flag' in registers, saving a few bytes in .text for each call site. This should be backported to linux-4.0 or later, which first introduced the stack sanitizer in the kernel. Fixes: c420f167db8c ("kasan: enable stack instrumentation") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21vt: fix unchecked __put_user() in tioclinux ioctlsAdam Borowski1-3/+3
commit 6987dc8a70976561d22450b5858fc9767788cc1c upstream. Only read access is checked before this call. Actually, at the moment this is not an issue, as every in-tree arch does the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU to tell them apart, but this wasn't the case in the past and may happen again on some odd arch in the future. If anyone cares about 3.7 and earlier, this is a security hole (untested) on real 80386 CPUs. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-26serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'Christophe JAILLET1-3/+8
commit be40597a1bc173bf9dadccdf5388b956f620ae8f upstream. UARTn_FRAME_PARITY_ODD is 0x0300 UARTn_FRAME_PARITY_EVEN is 0x0200 So if the UART is configured for EVEN parity, it would be reported as ODD. Fix it by correctly testing if the 2 bits are set. Fixes: 3afbd89c9639 ("serial/efm32: add new driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14serial: sh-sci: Fix panic when serial console and DMA are enabledTakatoshi Akiyama1-4/+6
commit 3c9101766b502a0163d1d437fada5801cf616be2 upstream. This patch fixes an issue that kernel panic happens when DMA is enabled and we press enter key while the kernel booting on the serial console. * An interrupt may occur after sci_request_irq(). * DMA transfer area is initialized by setup_timer() in sci_request_dma() and used in interrupt. If an interrupt occurred between sci_request_irq() and setup_timer() in sci_request_dma(), DMA transfer area has not been initialized yet. So, this patch changes the order of sci_request_irq() and sci_request_dma(). Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.") Signed-off-by: Takatoshi Akiyama <takatoshi.akiyama.kj@ps.hitachi-solutions.com> [Shimoda changes the commit log] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14tty: Drop krefs for interrupted tty lockPeter Hurley2-3/+7
commit e9036d0662360cd4c79578565ce422ed5872f301 upstream. When the tty lock is interrupted on attempted re-open, 2 tty krefs are still held. Drop extra kref before returning failure from tty_lock_interruptible(), and drop lookup kref before returning failure from tty_open(). Fixes: 0bfd464d3fdd ("tty: Wait interruptibly for tty lock on reopen") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14serial: ifx6x60: fix use-after-free on module unloadJohan Hovold1-1/+1
commit 1e948479b3d63e3ac0ecca13cbf4921c7d17c168 upstream. Make sure to deregister the SPI driver before releasing the tty driver to avoid use-after-free in the SPI remove callback where the tty devices are deregistered. Fixes: 72d4724ea54c ("serial: ifx6x60: Add modem power off function in the platform reboot process") Cc: Jun Chen <jun.d.chen@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20tty: pty: Fix ldisc flush after userspace become aware of the data alreadyWang YanQing1-6/+1
commit 77dae6134440420bac334581a3ccee94cee1c054 upstream. While using emacs, cat or others' commands in konsole with recent kernels, I have met many times that CTRL-C freeze konsole. After konsole freeze I can't type anything, then I have to open a new one, it is very annoying. See bug report: https://bugs.kde.org/show_bug.cgi?id=175283 The platform in that bug report is Solaris, but now the pty in linux has the same problem or the same behavior as Solaris :) It has high possibility to trigger the problem follow steps below: Note: In my test, BigFile is a text file whose size is bigger than 1G 1:open konsole 1:cat BigFile 2:CTRL-C After some digging, I find out the reason is that commit 1d1d14da12e7 ("pty: Fix buffer flush deadlock") changes the behavior of pty_flush_buffer. Thread A Thread B -------- -------- 1:n_tty_poll return POLLIN 2:CTRL-C trigger pty_flush_buffer tty_buffer_flush n_tty_flush_buffer 3:attempt to check count of chars: ioctl(fd, TIOCINQ, &available) available is equal to 0 4:read(fd, buffer, avaiable) return 0 5:konsole close fd Yes, I know we could use the same patch included in the BUG report as a workaround for linux platform too. But I think the data in ldisc is belong to application of another side, we shouldn't clear it when we want to flush write buffer of this side in pty_flush_buffer. So I think it is better to disable ldisc flush in pty_flush_buffer, because its new hehavior bring no benefit except that it mess up the behavior between POLLIN, and TIOCINQ or FIONREAD. Also I find no flush_buffer function in others' tty driver has the same behavior as current pty_flush_buffer. Fixes: 1d1d14da12e7 ("pty: Fix buffer flush deadlock") Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20serial: omap: suspend device on probe errorsJohan Hovold1-1/+2
commit 77e6fe7fd2b7cba0bf2f2dc8cde51d7b9a35bf74 upstream. Make sure to actually suspend the device before returning after a failed (or deferred) probe. Note that autosuspend must be disabled before runtime pm is disabled in order to balance the usage count due to a negative autosuspend delay as well as to make the final put suspend the device synchronously. Fixes: 388bc2622680 ("omap-serial: Fix the error handling in the omap_serial probe") Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20serial: omap: fix runtime-pm handling on unbindJohan Hovold1-1/+5
commit 099bd73dc17ed77aa8c98323e043613b6e8f54fc upstream. An unbalanced and misplaced synchronous put was used to suspend the device on driver unbind, something which with a likewise misplaced pm_runtime_disable leads to external aborts when an open port is being removed. Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010 ... [<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60) [<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138) [<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190) [<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c) [<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20) [<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260) [<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60) [<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c) Fix this up by resuming the device before deregistering the port and by suspending and disabling runtime pm only after the port has been removed. Also make sure to disable autosuspend before disabling runtime pm so that the usage count is balanced and device actually suspended before returning. Note that due to a negative autosuspend delay being set in probe, the unbalanced put would actually suspend the device on first driver unbind, while rebinding and again unbinding would result in a negative power.usage_count. Fixes: 7e9c8e7dbf3b ("serial: omap: make sure to suspend device before remove") Cc: Felipe Balbi <balbi@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20serial: samsung: Use right device for DMA-mapping callsMarek Szyprowski1-5/+4
commit 768d64f491a530062ddad50e016fb27125f8bd7c upstream. Driver should provide its own struct device for all DMA-mapping calls instead of extracting device pointer from DMA engine channel. Although this is harmless from the driver operation perspective on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes following DMA API debug warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1241 check_sync+0x520/0x9f4 samsung-uart 12c20000.serial: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000006df0f580] [size=64 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00137-g07ca963 #51 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c0729058>] (check_sync+0x520/0x9f4) [<c0729058>] (check_sync) from [<c072967c>] (debug_dma_sync_single_for_device+0x88/0xc8) [<c072967c>] (debug_dma_sync_single_for_device) from [<c0803c10>] (s3c24xx_serial_start_tx_dma+0x100/0x2f8) [<c0803c10>] (s3c24xx_serial_start_tx_dma) from [<c0804338>] (s3c24xx_serial_tx_chars+0x198/0x33c) Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: 62c37eedb74c8 ("serial: samsung: add dma reqest/release functions") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14serial: 8250_omap: Fix probe and remove for PM runtimeTony Lindgren1-1/+7
commit 4e0f5cc65098ea32a1e77baae74215b9bd5276b1 upstream. Otherwise the interconnect related code implementing PM runtime will produce these errors on a failed probe: omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1 omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver? Note that we now also need to check for priv in omap8250_runtime_suspend() as it has not yet been registered if probe fails. And we need to use pm_runtime_put_sync() to properly idle the device like we already do in omap8250_remove(). Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-088250_pci: Fix potential use-after-free in error pathGabriel Krisman Bertazi1-7/+5
commit c130b666a9a711f985a0a44b58699ebe14bb7245 upstream. Commit f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during PCI error recovery") introduces a potential use-after-free in case the pciserial_init_ports call in serial8250_io_resume fails, which may happen if a memory allocation fails or if the .init quirk failed for whatever reason). If this happen, further pci_get_drvdata will return a pointer to freed memory. This patch reworks the PCI recovery resume hook to restore the old priv structure in this case, which should be ok, since the ports were already detached. Such error during recovery causes us to give up on the recovery. Fixes: f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during PCI error recovery") Reported-by: Michal Suchanek <msuchanek@suse.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-30tty: nozomi: avoid a harmless gcc warningArnd Bergmann1-1/+1
commit a4f642a8a3c2838ad09fe8313d45db46600e1478 upstream. The nozomi wireless data driver has its own helper function to transfer data from a FIFO, doing an extra byte swap on big-endian architectures, presumably to bring the data back into byte-serial order after readw() or readl() perform their implicit byteswap. This helper function is used in the receive_data() function to first read the length into a 32-bit variable, which causes a compile-time warning: drivers/tty/nozomi.c: In function 'receive_data': drivers/tty/nozomi.c:857:9: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized] The problem is that gcc is unsure whether the data was actually read or not. We know that it is at this point, so we can replace it with a single readl() to shut up that warning. I am leaving the byteswap in there, to preserve the existing behavior, even though this seems fishy: Reading the length of the data into a cpu-endian variable should normally not use a second byteswap on big-endian systems, unless the hardware is aware of the CPU endianess. There appears to be a lot more confusion about endianess in this driver, so it probably has not worked on big-endian systems in a long time, if ever, and I have no way to test it. It's well possible that this driver has not been used by anyone in a while, the last patch that looks like it was tested on the hardware is from 2008. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is doneRichard Genoud1-6/+5
commit b389f173aaa1204d6dc1f299082a162eb0491545 upstream. When using RS485 in half duplex, RX should be enabled when TX is finished, and stopped when TX starts. Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA was used. So, collisions could happened. But disabling RX in atmel_start_tx() uncovered another bug: RX was enabled again in the wrong place (in atmel_tx_dma) instead of being enabled when TX is finished (in atmel_complete_tx_dma), so the transmission simply stopped. This bug was not triggered before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was never disabled before. Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem. Reported-by: Gil Weber <webergil@gmail.com> Fixes: 0058f0871efe7b01c6 Tested-by: Gil Weber <webergil@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Bryan Evenson <bevenson@melinkcorp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08tty/serial: atmel: fix TX path in atmel_console_write()Nicolas Ferre1-0/+3
commit 497e1e16f45c70574dc9922c7f75c642c2162119 upstream. A side effect of 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx") is that the console can be called with TX path disabled. Then the system would hang trying to push charecters out in atmel_console_putchar(). Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08tty/serial: atmel: fix race condition (TX+DMA)Richard Genoud1-0/+5
commit 31ca2c63fdc0aee725cbd4f207c1256f5deaabde upstream. If uart_flush_buffer() is called between atmel_tx_dma() and atmel_complete_tx_dma(), the circular buffer has been cleared, but not atmel_port->tx_len. That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE - atmel_port->tx_len) bytes). Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30serial: 8250_pci: Detach low-level driver during PCI error recoverySumit Semwal1-4/+19
From: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> [ Upstream commit f209fa03fc9d131b3108c2e4936181eabab87416 ] During a PCI error recovery, like the ones provoked by EEH in the ppc64 platform, all IO to the device must be blocked while the recovery is completed. Current 8250_pci implementation only suspends the port instead of detaching it, which doesn't prevent incoming accesses like TIOCMGET and TIOCMSET calls from reaching the device. Those end up racing with the EEH recovery, crashing it. Similar races were also observed when opening the device and when shutting it down during recovery. This patch implements a more robust IO blockage for the 8250_pci recovery by unregistering the port at the beginning of the procedure and re-adding it afterwards. Since the port is detached from the uart layer, we can be sure that no request will make through to the device during recovery. This is similar to the solution used by the JSM serial driver. I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on this one over one year ago. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-18serial: samsung: Continue to work if DMA request failsKrzysztof Kozlowski1-2/+4
commit f98c7bce570bdbe344b74ff5daa7dfeef3f22929 upstream. If DMA is not available (even when configured in DeviceTree), the driver will fail the startup procedure thus making serial console not available. For example this causes boot failure on QEMU ARMv7 (Exynos4210, SMDKC210): [    1.302575] OF: amba_device_add() failed (-19) for /amba/pdma@12680000 ... [   11.435732] samsung-uart 13800000.serial: DMA request failed [   72.963893] samsung-uart 13800000.serial: DMA request failed [   73.143361] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 DMA is not necessary for serial to work, so continue with UART startup after emitting a warning. Fixes: 62c37eedb74c ("serial: samsung: add dma reqest/release functions") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-15serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cardsIan Abbott1-0/+13
commit 1c9c858e2ff8ae8024a3d75d2ed080063af43754 upstream. The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports, respectively. The first 4 ports are implemented by an OX16PCI954 chip, and the second 4 ports are implemented by an OX16C954 chip on a local bus, bridged by the second PCI function of the OX16PCI954. The ports are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a non-standard oscillator frequency of 20 MHz (base_baud = 1250000). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-15tty: n_hdlc: get rid of racy n_hdlc.tbufAlexander Popov1-63/+69
commit 82f2341c94d270421f383641b7cd670e474db56b upstream. Currently N_HDLC line discipline uses a self-made singly linked list for data buffers and has n_hdlc.tbuf pointer for buffer retransmitting after an error. The commit be10eb7589337e5defbe214dae038a53dd21add8 ("tty: n_hdlc add buffer flushing") introduced racy access to n_hdlc.tbuf. After tx error concurrent flush_tx_queue() and n_hdlc_send_frames() can put one data buffer to tx_free_buf_list twice. That causes double free in n_hdlc_release(). Let's use standard kernel linked list and get rid of n_hdlc.tbuf: in case of tx error put current data buffer after the head of tx_buf_list. Signed-off-by: Alexander Popov <alex.popov@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-15TTY: n_hdlc, fix lockdep false positiveJiri Slaby1-15/+4
commit e9b736d88af1a143530565929390cadf036dc799 upstream. The class of 4 n_hdls buf locks is the same because a single function n_hdlc_buf_list_init is used to init all the locks. But since flush_tx_queue takes n_hdlc->tx_buf_list.spinlock and then calls n_hdlc_buf_put which takes n_hdlc->tx_free_buf_list.spinlock, lockdep emits a warning: ============================================= [ INFO: possible recursive locking detected ] 4.3.0-25.g91e30a7-default #1 Not tainted --------------------------------------------- a.out/1248 is trying to acquire lock: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fd020>] n_hdlc_buf_put+0x20/0x60 [n_hdlc] but task is already holding lock: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fdc07>] n_hdlc_tty_ioctl+0x127/0x1d0 [n_hdlc] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&list->spinlock)->rlock); lock(&(&list->spinlock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by a.out/1248: #0: (&tty->ldisc_sem){++++++}, at: [<ffffffff814c9eb0>] tty_ldisc_ref_wait+0x20/0x50 #1: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fdc07>] n_hdlc_tty_ioctl+0x127/0x1d0 [n_hdlc] ... Call Trace: ... [<ffffffff81738fd0>] _raw_spin_lock_irqsave+0x50/0x70 [<ffffffffa01fd020>] n_hdlc_buf_put+0x20/0x60 [n_hdlc] [<ffffffffa01fdc24>] n_hdlc_tty_ioctl+0x144/0x1d0 [n_hdlc] [<ffffffff814c25c1>] tty_ioctl+0x3f1/0xe40 ... Fix it by initializing the spin_locks separately. This removes also reduntand memset of a freshly kzallocated space. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-26tty: serial: msm: Fix module autoloadJavier Martinez Canillas1-0/+1
commit abe81f3b8ed2996e1712d26d38ff6b73f582c616 upstream. If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/tty/serial/msm_serial.ko | grep alias $ After this patch: $ modinfo drivers/tty/serial/msm_serial.ko | grep alias alias: of:N*T*Cqcom,msm-uartdmC* alias: of:N*T*Cqcom,msm-uartdm alias: of:N*T*Cqcom,msm-uartC* alias: of:N*T*Cqcom,msm-uart Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19sysrq: attach sysrq handler correctly for 32-bit kernelAkinobu Mita1-2/+2
commit 802c03881f29844af0252b6e22be5d2f65f93fd0 upstream. The sysrq input handler should be attached to the input device which has a left alt key. On 32-bit kernels, some input devices which has a left alt key cannot attach sysrq handler. Because the keybit bitmap in struct input_device_id for sysrq is not correctly initialized. KEY_LEFTALT is 56 which is greater than BITS_PER_LONG on 32-bit kernels. I found this problem when using a matrix keypad device which defines a KEY_LEFTALT (56) but doesn't have a KEY_O (24 == 56%32). Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_txRichard Genoud1-0/+11
commit 89d8232411a85b9a6b12fd5da4d07d8a138a8e0c upstream. If we don't disable the transmitter in atmel_stop_tx, the DMA buffer continues to send data until it is emptied. This cause problems with the flow control (CTS is asserted and data are still sent). So, disabling the transmitter in atmel_stop_tx is a sane thing to do. Tested on at91sam9g35-cm(DMA) Tested for regressions on sama5d2-xplained(Fifo) and at91sam9g20ek(PDC) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09sc16is7xx: Drop bogus use of IRQF_ONESHOTJosh Cartwright1-1/+1
commit 04da73803c05dc1150ccc31cbf93e8cd56679c09 upstream. The use of IRQF_ONESHOT when registering an interrupt handler with request_irq() is non-sensical. Not only that, it also prevents the handler from being threaded when it otherwise should be w/ IRQ_FORCED_THREADING is enabled. This causes the following deadlock observed by Sean Nyekjaer on -rt: Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [..] rt_spin_lock_slowlock from queue_kthread_work queue_kthread_work from sc16is7xx_irq sc16is7xx_irq [sc16is7xx] from handle_irq_event_percpu handle_irq_event_percpu from handle_irq_event handle_irq_event from handle_level_irq handle_level_irq from generic_handle_irq generic_handle_irq from mxc_gpio_irq_handler mxc_gpio_irq_handler from mx3_gpio_irq_handler mx3_gpio_irq_handler from generic_handle_irq generic_handle_irq from __handle_domain_irq __handle_domain_irq from gic_handle_irq gic_handle_irq from __irq_svc __irq_svc from rt_spin_unlock rt_spin_unlock from kthread_worker_fn kthread_worker_fn from kthread kthread from ret_from_fork Fixes: 9e6f4ca3e567 ("sc16is7xx: use kthread_worker for tx_work and irq") Reported-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Josh Cartwright <joshc@ni.com> Cc: linux-rt-users@vger.kernel.org Cc: Jakub Kicinski <moorray3@wp.pl> Cc: linux-serial@vger.kernel.org Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09vt: fix Scroll Lock LED trigger nameMaciej S. Szmigiero1-1/+1
commit 31b5929d533f5183972cf57a7844b456ed996f3c upstream. There is a disagreement between drivers/tty/vt/keyboard.c and drivers/input/input-leds.c with regard to what is a Scroll Lock LED trigger name: input calls it "kbd-scrolllock", but vt calls it "kbd-scrollock" (two l's). This prevents Scroll Lock LED trigger from binding to this LED by default. Since it is a scroLL Lock LED, this interface was introduced only about a year ago and in an Internet search people seem to reference this trigger only to set it to this LED let's simply rename it to "kbd-scrolllock". Also, it looks like this was supposed to be changed before this code was merged: https://lkml.org/lkml/2015/6/9/697 but it was done only on the input side. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-21sparc: serial: sunhv: fix a double lock bugDan Carpenter1-6/+0
[ Upstream commit 344e3c7734d5090b148c19ac6539b8947fed6767 ] We accidentally take the "port->lock" twice in a row. This old code was supposed to be deleted. Fixes: e58e241c1788 ('sparc: serial: Clean up the locking for -rt') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-21tty: Prevent ldisc drivers from re-using stale tty fieldsPeter Hurley1-0/+7
commit dd42bf1197144ede075a9d4793123f7689e164bc upstream. Line discipline drivers may mistakenly misuse ldisc-related fields when initializing. For example, a failure to initialize tty->receive_room in the N_GIGASET_M101 line discipline was recently found and fixed [1]. Now, the N_X25 line discipline has been discovered accessing the previous line discipline's already-freed private data [2]. Harden the ldisc interface against misuse by initializing revelant tty fields before instancing the new line discipline. [1] commit fd98e9419d8d622a4de91f76b306af6aa627aa9c Author: Tilman Schmidt <tilman@imap.cc> Date: Tue Jul 14 00:37:13 2015 +0200 isdn/gigaset: reset tty->receive_room when attaching ser_gigaset [2] Report from Sasha Levin <sasha.levin@oracle.com> [ 634.336761] ================================================================== [ 634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0 [ 634.339558] Read of size 4 by task syzkaller_execu/8981 [ 634.340359] ============================================================================= [ 634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected ... [ 634.405018] Call Trace: [ 634.405277] dump_stack (lib/dump_stack.c:52) [ 634.405775] print_trailer (mm/slub.c:655) [ 634.406361] object_err (mm/slub.c:662) [ 634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236) [ 634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279) [ 634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1)) [ 634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447) [ 634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567) [ 634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879) [ 634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607) [ 634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613) [ 634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188) Cc: Tilman Schmidt <tilman@imap.cc> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-18tty/serial: at91: fix hardware handshake on Atmel platformsRichard Genoud1-4/+23
commit 9bcffe7575b721d7b6d9b3090fe18809d9806e78 upstream. After commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), the hardware handshake wasn't functional anymore on Atmel platforms (beside SAMA5D2). To understand why, one has to understand the flag ATMEL_US_USMODE_HWHS first: Before commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), this flag was never set. Thus, the CTS/RTS where only handled by serial_core (and everything worked just fine). This commit introduced the use of the ATMEL_US_USMODE_HWHS flag, enabling it for all boards when the user space enables flow control. When the ATMEL_US_USMODE_HWHS is set, the Atmel USART controller handles a part of the flow control job: - disable the transmitter when the CTS pin gets high. - drive the RTS pin high when the DMA buffer transfer is completed or PDC RX buffer full or RX FIFO is beyond threshold. (depending on the controller version). NB: This feature is *not* mandatory for the flow control to work. (Nevertheless, it's very useful if low latencies are needed.) Now, the specifics of the ATMEL_US_USMODE_HWHS flag: - For platforms with DMAC and no FIFOs (sam9x25, sam9x35, sama5D3, sama5D4, sam9g15, sam9g25, sam9g35)* this feature simply doesn't work. ( source: https://lkml.org/lkml/2016/9/7/598 ) Tested it on sam9g35, the RTS pins always stays up, even when RXEN=1 or a new DMA transfer descriptor is set. => ATMEL_US_USMODE_HWHS must not be used for those platforms - For platforms with a PDC (sam926{0,1,3}, sam9g10, sam9g20, sam9g45, sam9g46)*, there's another kind of problem. Once the flag ATMEL_US_USMODE_HWHS is set, the RTS pin can't be driven anymore via RTSEN/RTSDIS in USART Control Register. The RTS pin can only be driven by enabling/disabling the receiver or setting RCR=RNCR=0 in the PDC (Receive (Next) Counter Register). => Doing this is beyond the scope of this patch and could add other bugs, so the original (and working) behaviour should be set for those platforms (meaning ATMEL_US_USMODE_HWHS flag should be unset). - For platforms with a FIFO (sama5d2)*, the RTS pin is driven according to the RX FIFO thresholds, and can be also driven by RTSEN/RTSDIS in USART Control Register. No problem here. (This was the use case of commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled")) NB: If the CTS pin declared as a GPIO in the DTS, (for instance cts-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_LOW>), the transmitter will be disabled. => ATMEL_US_USMODE_HWHS flag can be set for this platform ONLY IF the CTS pin is not a GPIO. So, the only case when ATMEL_US_USMODE_HWHS can be enabled is when (atmel_use_fifo(port) && !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) Tested on all Atmel USART controller flavours: AT91SAM9G35-CM (DMAC flavour), AT91SAM9G20-EK (PDC flavour), SAMA5D2xplained (FIFO flavour). * the list may not be exhaustive Fixes: 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nicolas.ferre@atmel.com: adapt to 4.4.x kernel for stable by adding the atmel_port variable declaration which was missing] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10tty: vt, fix bogus division in csi_JJiri Slaby1-1/+1
commit 42acfc6615f47e465731c263bee0c799edb098f2 upstream. In csi_J(3), the third parameter of scr_memsetw (vc_screenbuf_size) is divided by 2 inappropriatelly. But scr_memsetw expects size, not count, because it divides the size by 2 on its own before doing actual memset-by-words. So remove the bogus division. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Petr Písař <ppisar@redhat.com> Fixes: f8df13e0a9 (tty: Clean console safely) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10tty: limit terminal size to 4M charsDmitry Vyukov1-0/+2
commit 32b2921e6a7461fe63b71217067a6cf4bddb132f upstream. Size of kmalloc() in vc_do_resize() is controlled by user. Too large kmalloc() size triggers WARNING message on console. Put a reasonable upper bound on terminal size to prevent WARNINGs. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> CC: David Rientjes <rientjes@google.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: linux-kernel@vger.kernel.org Cc: syzkaller@googlegroups.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10vt: clear selection before resizingScot Doyle1-0/+3
commit 009e39ae44f4191188aeb6dfbf661b771dbbe515 upstream. When resizing a vt its selection may exceed the new size, resulting in an invalid memory access [1]. Clear the selection before resizing. [1] http://lkml.kernel.org/r/CACT4Y+acDTwy4umEvf5ROBGiRJNrxHN4Cn5szCXE5Jw-d1B=Xw@mail.gmail.com Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-22serial: 8250_dw: Check the data->pclk when get apb_pclkKefeng Wang1-1/+1
commit e16b46f190a22587898b331f9d58583b0b166c9a upstream. It should check the data->pclk, not data->clk when get apb_pclk. Fixes: c8ed99d4f6a8("serial: 8250_dw: Add support for deferred probing") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24serial: 8250: added acces i/o products quad and octal serial cardsJimi Damon1-0/+139
commit c8d192428f52f244130b84650ad616df09f2b1e1 upstream. Added devices ids for acces i/o products quad and octal serial cards that make use of existing Pericom PI7C9X7954 and PI7C9X7958 configurations . Signed-off-by: Jimi Damon <jdamon@accesio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24serial: 8250_mid: fix divide error bug if baud rate is 0Andy Shevchenko1-0/+3
commit 47b34d2ef266e2c283b514d65c8963c2ccd42474 upstream. Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Reported-by: "Mendez Salinas, Fernando" <fernando.mendez.salinas@intel.com> Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20tty/serial: atmel: fix RS485 half duplex with DMAAlexandre Belloni1-6/+8
commit 0058f0871efe7b01c6f2b3046c68196ab73e96da upstream. When using DMA, half duplex doesn't work properly because rx is not stopped before starting tx. Ensure we call atmel_stop_rx() in the DMA case. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20serial: samsung: Fix ERR pointer dereference on deferred probeKrzysztof Kozlowski1-5/+13
commit e51e4d8a185de90424b03f30181b35f29c46a25a upstream. When the clk_get() of "uart" clock returns EPROBE_DEFER, the next re-probe finishes with success but uses invalid (ERR_PTR) values. This leads to dereferencing of ERR_PTR stored under ourport->clk: 12c30000.serial: Controller clock not found (...) 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 Unable to handle kernel paging request at virtual address fffffdfb (clk_prepare) from [<c039f7d0>] (s3c24xx_serial_pm+0x20/0x128) (s3c24xx_serial_pm) from [<c0395414>] (uart_change_pm+0x38/0x40) (uart_change_pm) from [<c039689c>] (uart_add_one_port+0x31c/0x44c) (uart_add_one_port) from [<c03a035c>] (s3c24xx_serial_probe+0x2a8/0x418) (s3c24xx_serial_probe) from [<c03ee110>] (platform_drv_probe+0x50/0xb0) (platform_drv_probe) from [<c03ecb44>] (driver_probe_device+0x1f4/0x2b0) (driver_probe_device) from [<c03eb0c0>] (bus_for_each_drv+0x44/0x8c) (bus_for_each_drv) from [<c03ec8c8>] (__device_attach+0x9c/0x100) (__device_attach) from [<c03ebf54>] (bus_probe_device+0x84/0x8c) (bus_probe_device) from [<c03ec388>] (deferred_probe_work_func+0x60/0x8c) (deferred_probe_work_func) from [<c012fee4>] (process_one_work+0x120/0x328) (process_one_work) from [<c0130150>] (worker_thread+0x2c/0x4ac) (worker_thread) from [<c0135320>] (kthread+0xd8/0xf4) (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c) The first unsuccessful clk_get() causes s3c24xx_serial_init_port() to exit with failure but the s3c24xx_uart_port is left half-configured (e.g. port->mapbase is set, clk contains ERR_PTR). On next re-probe, the function s3c24xx_serial_init_port() will exit early with success because of configured port->mapbase and driver will use old values, including the ERR_PTR as clock. Fix this by cleaning the port->mapbase on error path so each re-probe will initialize all of the port settings. Fixes: 60e93575476f ("serial: samsung: enable clock before clearing pending interrupts during init") Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20tty: serial: msm: Don't read off end of tx fifoBjorn Andersson1-1/+1
commit 30acf549ca1e81859a67590ab9ecfce3d1050a0b upstream. For dm uarts in pio mode tx data is transferred to the fifo register 4 bytes at a time, but care is not taken when these 4 bytes spans the end of the xmit buffer so the loop might read up to 3 bytes past the buffer and then skip the actual data at the beginning of the buffer. Fix this by, analogous to the DMA case, make sure the chunk doesn't wrap the xmit buffer. Fixes: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") Cc: Ivan Ivanov <iivanov.xz@gmail.com> Reported-by: Frank Rowand <frowand.list@gmail.com> Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org> Tested-by: Frank Rowand <frank.rowand@am.sony.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16devpts: clean up interface to pty driversLinus Torvalds1-33/+30
commit 67245ff332064c01b760afa7a384ccda024bfd24 upstream. This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Francesco Ruggeri <fruggeri@arista.com> Cc: "Herton R. Krzesinski" <herton@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 07:09:26 +0300