summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Collapse)AuthorFilesLines
2011-09-15cris: fix a build error in drivers/tty/serial/crisv10.cWANG Cong1-2/+2
Fix these errors: drivers/tty/serial/crisv10.c:4453: error: 'if_ser0' undeclared (first use in this function): 2 errors in 2 logs drivers/tty/serial/crisv10.c:4453: error: (Each undeclared identifier is reported only once: 2 errors in 2 logs drivers/tty/serial/crisv10.c:4453: error: for each function it appears in.): 2 errors in 2 logs "if_ser0" is a typo, it should be "if_serial_0". Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-30Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds1-11/+60
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: sh: fix the compile error in setup-sh7757.c serial: sh-sci: report CTS as active for get_mctrl sh: Add unaligned memory access for PC relative intructions sh: Fix unaligned memory access for branches without delay slots sh: Fix up fallout from cpuidle changes. serial: sh-sci: console Runtime PM support sh: Fix conflicting definitions of ptrace_triggered serial: sh-sci: fix DMA build by including dma-mapping.h serial: sh-sci: Fix up default regtype probing. sh: intc: enable both edges GPIO interrupts on sh7372 shwdt: fix usage of mod_timer clocksource: sh_cmt: wait for CMCNT on init V2
2011-08-29serial: sh-sci: report CTS as active for get_mctrlYoshii Takashi1-1/+1
sh-sci.c sets hardware up and then let the HW do all flow controls. There is no software code, nor needs to get/set real CTS signal. But, when turning CRTSCTS on through termios, uart_set_termios() in serial_core.c checks CTS, and stops TX if it is inactive at the moment. Because sci_get_mctrl() returns a fixed value DTR|RTS|DSR but CTS, the sequence open -> set CRTSCTS -> write hit the case and stop working, no more outputs. This patch makes sci_get_mctrl() report CTS in addition. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-28Merge branch 'pm-fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental) OMAP: omap_device: only override _noirq methods, not normal suspend/resume PM / Runtime: Correct documentation of pm_runtime_irq_safe() ARM: mach-shmobile: sh7372 LCDC1 suspend fix sh-sci / PM: Use power.irq_safe PM: Use spinlock instead of mutex in clock management functions
2011-08-24sh-sci / PM: Use power.irq_safeRafael J. Wysocki1-0/+1
Since sci_port_enable() and sci_port_disable() may be run with interrupts off and they execute pm_runtime_get_sync() and pm_runtime_put_sync(), respectively, the SCI device's power.irq_safe flag has to be set to indicate that it is safe to execute runtime PM callbacks for this device with interrupts off. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-08-23omap-serial: Allow IXON and IXOFF to be disabled.Nick Pelly1-2/+1
Fixes logic bug that software flow control cannot be disabled, because serial_omap_configure_xonxoff() is not called if both IXON and IXOFF bits are cleared. Signed-off-by: Nick Pelly <npelly@google.com> Acked-by: Govindraj.R <govindraj.raja@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23TTY: serial, document ignoring of uart->ops->startup errorJiri Slaby1-0/+5
When a user has SYS_ADMIN capabilities and uart->ops->startup returns an error in uart_startup, we silently drop the error. We then return 0 and behave as if it didn't fail. (Not quite, since we set TTY_IO_ERROR bit and leave ASYNC_INITIALIZED bit cleared.) This all is to allow setserial to work with improperly configured or unconfigured ports. User can thus set port properties and reconfigure properly. This patch only documents this behavior. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russel King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-238250: Fix race condition in serial8250_backup_timeout().Al Cooper1-3/+5
This is to fix an issue where output will suddenly become very slow. The problem occurs on 8250 UARTS with the hardware bug UART_BUG_THRE. BACKGROUND For normal UARTs (without UART_BUG_THRE): When the serial core layer gets new transmit data and the transmitter is idle, it buffers the data and calls the 8250s' serial8250_start_tx() routine which will simply enable the TX interrupt in the IER register and return. This should immediately fire a THRE interrupt and begin transmitting the data. For buggy UARTs (with UART_BUG_THRE): merely enabling the TX interrupt in IER does not necessarily generate a new THRE interrupt. Therefore, a background timer periodically checks to see if there is pending data, and starts transmission if that is the case. The bug happens on SMP systems when the system has nothing to transmit, the transmit interrupt is disabled and the following sequence occurs: - CPU0: The background timer routine serial8250_backup_timeout() starts and saves the state of the interrupt enable register (IER) and then disables all interrupts in IER. NOTE: The transmit interrupt (TI) bit is saved as disabled. - CPU1: The serial core gets data to transmit, grabs the port lock and calls serial8250_start_tx() which enables the TI in IER. - CPU0: serial8250_backup_timeout() waits for the port lock. - CPU1: finishes (with TI enabled) and releases the port lock. - CPU0: serial8250_backup_timeout() calls the interrupt routine which will transmit the next fifo's worth of data and then restores the IER from the previously saved value (TI disabled). At this point, as long as the serial core has more transmit data buffered, it will not call serial8250_start_tx() again and the background timer routine will slowly transmit the data. The fix is to have serial8250_start_tx() get the port lock before it saves the IER state and release it after restoring IER. This will prevent serial8250_start_tx() from running in parallel. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23serial/8250_pci: delete duplicate data definitionTomoya MORINAGA1-5/+0
Data definiton "VendorID=10DB, device_id=800D" is already defined. This patch deletes the duplicate definition. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-238250_pci: add support for Rosewill RC-305 4x serial port cardEric Smith1-1/+5
This patch adds support for the Rosewill RC-305 four-port PCI serial card, and probably any other four-port serial cards based on the Moschip MCS9865 chip, assuming that the EEPROM on the card was programmed in accordance with Table 6 of the MCS9865 EEPROM Application Note version 0.3 dated 16-May-2008, available from the Moschip web site (registration required). This patch is based on an earlier patch [1] for the SYBA 6x serial port card by Ira W. Snyder. [1]: http://www.gossamer-threads.com/lists/linux/kernel/1162435 Signed-off-by: Eric Smith <eric@brouhaha.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23tty: Add "spi:" prefix for spi modaliasAxel Lin3-3/+3
Since commit e0626e38 (spi: prefix modalias with "spi:"), the spi modalias is prefixed with "spi:". This patch adds "spi:" prefix and removes "-spi" suffix in the modalias. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23atmel_serial: fix atmel_default_console_deviceVoss, Nikolaus1-3/+5
reflect new static uart platform ids introduced by patch http://article.gmane.org/gmane.linux.kernel/1126105 Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23serial: 8250_pnp: add Intermec CV60 touchscreen deviceBjorn Helgaas1-0/+3
It would have been nice if Intermec had supplied a PNP0501 _CID for the COM3 device, but they didn't, so we have to recognize it explicitly. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=40612 CC: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable <stable@kernel.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23drivers/serial/ucc_uart.c: Fix compiler warningKumar Gala1-1/+1
drivers/tty/serial/ucc_uart.c: In function 'qe2cpu_addr': drivers/tty/serial/ucc_uart.c:238:2: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'dma_addr_t' Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23pch_uart: Set PCIe bus number using probe parameterTomoya MORINAGA1-1/+2
Currently, PCIe bus number is set as fixed value "2". However, PCIe bus number is not always "2". This patch sets bus number using probe() parameter. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-09serial: samsung: Fix build errorKukjin Kim1-2/+6
drivers/tty/serial/samsung.c: In function 's3c24xx_serial_init': drivers/tty/serial/samsung.c:1237: error: lvalue required as unary '&' operand Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08Merge branch 'master' of ↵Paul Mundt2-10/+5
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into sh-latest Conflicts: drivers/tty/serial/sh-sci.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-08sh: Fix boot crash related to SCIRafael J. Wysocki1-1/+1
Commit d006199e72a9 ("serial: sh-sci: Regtype probing doesn't need to be fatal.") made sci_init_single() return when sci_probe_regmap() succeeds, although it should return when sci_probe_regmap() fails. This causes systems using the serial sh-sci driver to crash during boot. Fix the problem by using the right return condition. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-04dt: remove of_alias_get_id() referenceGrant Likely1-9/+4
of_alias_get_id() is broken and being reverted. Remove the reference to it and replace with a single incrementing id number. There is no risk of regression here on the imx driver since the imx change to use of_alias_get_id() is commit 22698aa2, "serial/imx: add device tree probe support" which is new for v3.1, and it won't get used unless CONFIG_OF is enabled and the board is booted using a device tree. A single incrementing integer is sufficient for now. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2011-08-03serial: sh-sci: console Runtime PM supportMagnus Damm1-10/+58
Add Runtime PM context save/restore support to the SCIF driver. Tested on the AP4EVB console. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-03serial: sh-sci: fix DMA build by including dma-mapping.hMagnus Damm1-0/+1
Include dma-mapping.h to fix build of the sh-sci driver on SH-Mobile ARM (sh73a0) when CONFIG_SERIAL_SH_SCI_DMA=y: drivers/tty/serial/sh-sci.c: In function 'sci_rx_dma_release': drivers/tty/serial/sh-sci.c:1182:3: error: implicit declaration of function 'dma_free_coherent' drivers/tty/serial/sh-sci.c: In function 'work_fn_tx': drivers/tty/serial/sh-sci.c:1333:2: error: implicit declaration of function 'dma_sync_sg_for_device' drivers/tty/serial/sh-sci.c: In function 'sci_request_dma': drivers/tty/serial/sh-sci.c:1498:3: error: implicit declaration of function 'dma_map_sg' drivers/tty/serial/sh-sci.c:1527:3: error: implicit declaration of function 'dma_alloc_coherent' drivers/tty/serial/sh-sci.c:1527:10: warning: assignment makes pointer from integer without a cast make[3]: *** [drivers/tty/serial/sh-sci.o] Error 1 make[2]: *** [drivers/tty/serial] Error 2 make[1]: *** [drivers/tty] Error 2 make: *** [drivers] Error 2 Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-03serial: sh-sci: Fix up default regtype probing.Paul Mundt1-1/+1
Presently the default regtype probing inadvertently bails out due to an inverted error check. This fixes it up, and gets platforms without explicit regtype specifications working again. Reported-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-01Merge branch 'sh-latest' of ↵Linus Torvalds3-727/+466
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits) SH: static should be at beginning of declaration sh: move CLKDEV_xxx_ID macro to sh_clk.h sh: clock-shx3: add CLKDEV_ICK_ID for cleanup sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: modify I2C clock settings sh: clock-sh7343: modify I2C clock settings sh: clock-sh7723: modify I2C clock settings sh: clock-sh7722: modify I2C clock settings sh: clock-sh7724: modify I2C clock settings serial: sh-sci: Fix up pretty name printing for port IRQs. serial: sh-sci: Kill off per-port enable/disable callbacks. serial: sh-sci: Add missing module description/author bits. serial: sh-sci: Regtype probing doesn't need to be fatal. sh: Tidy up pre-clkdev clk_get() error handling. ...
2011-07-27serial/imx: add device tree probe supportShawn Guo1-11/+72
It adds device tree probe support for imx tty/serial driver. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Jason Liu <jason.hui@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alan Cox <alan@linux.intel.com> Cc: Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-27serial/imx: get rid of the uses of cpu_is_mx1()Shawn Guo1-16/+69
The patch removes all the uses of cpu_is_mx1(). Instead, it uses the .id_table of platform_driver to distinguish the uart device type, IMX1_UART and IMX21_UART. The IMX21_UART type runs on all i.mx except i.mx1. A couple of !cpu_is_mx1 logic gets turned into is_imx21_uart, as the codes wrapped there are really IMX21 type uart specific. It also removes macro MX1_UCR3_REF25 and MX1_UCR3_REF30 which are not used anywhere. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alan Cox <alan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-27atomic: use <linux/atomic.h>Arun Sharma3-3/+3
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26Merge branch 'tty-next' of ↵Linus Torvalds6-20/+211
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (26 commits) amba pl011: workaround for uart registers lockup n_gsm: fix the wrong FCS handling pch_uart: add missing comment about OKI ML7223 pch_uart: Add MSI support tty: fix "IRQ45: nobody cared" PTI feature to allow user to name and mark masterchannel request. 0 for o PTI Makefile bug. tty: serial: samsung.c remove legacy PM code. SERIAL: SC26xx: Fix link error. serial: mrst_max3110: initialize waitqueue earlier mrst_max3110: Change max missing message priority. tty: s5pv210: Add delay loop on fifo reset function for UART tty/serial: Fix XSCALE serial ports, e.g. ce4100 serial: bfin_5xx: fix off-by-one with resource size drivers/tty: use printk_ratelimited() instead of printk_ratelimit() tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs tty: n_gsm: Add raw-ip support tty: n_gsm: expose gsmtty device nodes at ldisc open time pch_phub: Fix register miss-setting issue serial: 8250, increase PASS_LIMIT ...
2011-07-26Merge branch 'for-linus' of ↵Linus Torvalds8-15/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-25Merge branch 'next/deletion' of ↵Linus Torvalds4-239/+0
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/deletion' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: mach-loki: delete ARM: mach-s3c2400: delete ARM: mach-s3c24a0: delete
2011-07-25Merge branch 'next/cleanup' of ↵Linus Torvalds7-39/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (133 commits) ARM: EXYNOS4: Change devname for FIMD clkdev ARM: S3C64XX: Cleanup mach/regs-fb.h from mach-s3c64xx ARM: S5PV210: Cleanup mach/regs-fb.h from mach-s5pv210 ARM: S5PC100: Cleanup mach/regs-fb.h from mach-s5pc100 ARM: S3C24XX: Use generic s3c_set_platdata for devices ARM: S3C64XX: Use generic s3c_set_platdata for OneNAND ARM: SAMSUNG: Use generic s3c_set_platdata for NAND ARM: SAMSUNG: Use generic s3c_set_platdata for USB OHCI ARM: SAMSUNG: Use generic s3c_set_platdata for HWMON ARM: SAMSUNG: Use generic s3c_set_platdata for FB ARM: SAMSUNG: Use generic s3c_set_platdata for TS ARM: S3C64XX: Add PWM backlight support on SMDK6410 ARM: S5P64X0: Add PWM backlight support on SMDK6450 ARM: S5P64X0: Add PWM backlight support on SMDK6440 ARM: S5PC100: Add PWM backlight support on SMDKC100 ARM: S5PV210: Add PWM backlight support on SMDKV210 ARM: EXYNOS4: Add PWM backlight support on SMDKC210 ARM: EXYNOS4: Add PWM backlight support on SMDKV310 ARM: SAMSUNG: Create a common infrastructure for PWM backlight support clocksource: convert 32-bit down counting clocksource on S5PV210/S5P64X0 ... Fix up trivial conflict in arch/arm/mach-imx/mach-scb9328.c
2011-07-23Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-16/+27
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: dt: include linux/errno.h in linux/of_address.h of/address: Add of_find_matching_node_by_address helper dt: remove extra xsysace platform_driver registration tty/serial: Add devicetree support for nVidia Tegra serial ports dt: add empty of_property_read_u32[_array] for non-dt dt: bindings: move SEC node under new crypto/ dt: add helper function to read u32 arrays tty/serial: change of_serial to use new of_property_read_u32() api dt: add 'const' for of_property_read_string parameter **out_string dt: add helper functions to read u32 and string property values tty: of_serial: support for 32 bit accesses dt: document the of_serial bindings dt/platform: allow device name to be overridden drivers/amba: create devices from device tree dt: add of_platform_populate() for creating device from the device tree dt: Add default match table for bus ids
2011-07-20Merge branch 'next-samsung-clkdev-fix' into next-samsung-cleanupKukjin Kim7-39/+4
2011-07-20serial: Remove redundant console_initcall from s3c and s5p console driversThomas Abraham7-35/+2
Uart port is registered as a console during the driver's probe. So explict registration of console with console_initcall is removed. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> [kgene.kim@samsung.com: removed changes of s3c2400 and s3c24a0] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-18ARM: mach-s3c2400: deleteNicolas Pitre3-114/+0
On Tue, 28 Jun 2011, Ben Dooks wrote: > On Tue, Jun 28, 2011 at 11:22:57PM +0200, Arnd Bergmann wrote: > > > On a related note, what about mach-s3c2400? It seems to be even more > > incomplete. > > Probably the same fate awaits that. It is so old that there's little > incentive to do anything with it. So out it goes as well. The PORT_S3C2400 definition in include/linux/serial_core.h is left there to prevent a reuse of the same number for another port type. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-18ARM: mach-s3c24a0: deleteNicolas Pitre3-125/+0
Commit bcae8aeb32 "[ARM] S3C24A0: Initial architecture support files" brought in a bunch of files while explicitly leaving out the corresponding Kconfig entry, stating that the series is not complete. More than 2.5 years later, the support for this has not seen any progress. This is therefore dead code. If someone wants to revive this code, it is always possible to retrieve it from the Git repository. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-16Merge commit 'v3.0-rc7' into devicetree/nextGrant Likely8-12/+205
2011-07-14Merge branch 'master' of ↵David S. Miller1-1/+2
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/bluetooth/l2cap_core.c
2011-07-11Merge branch 'master' into for-nextJiri Kosina9-13/+208
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-10tty/serial: Add devicetree support for nVidia Tegra serial portsGrant Likely1-0/+1
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-09amba pl011: workaround for uart registers lockupShreshtha Kumar Sahu1-1/+122
This workaround aims to break the deadlock situation which raises during continuous transfer of data for long duration over uart with hardware flow control. It is observed that CTS interrupt cannot be cleared in uart interrupt register (ICR). Hence further transfer over uart gets blocked. It is seen that during such deadlock condition ICR don't get cleared even on multiple write. This leads pass_counter to decrease and finally reach zero. This can be taken as trigger point to run this UART_BT_WA. Workaround backups the register configuration, does soft reset of UART using BIT-0 of PRCC_K_SOFTRST_SET/CLEAR registers and restores the registers. This patch also provides support for uart init and exit function calls if present. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-09pch_uart: add missing comment about OKI ML7223Alexander Stein1-0/+1
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-09pch_uart: Add MSI supportAlexander Stein1-0/+5
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-07serial: samsung: Fix unintended usage of uart port 0 as consoleThomas Abraham1-4/+2
In s3c24xx_serial_console_setup function, if the uart port that is being setup as a console has not been initialized, an error can be returned instead of using uart port 0 as the default console port. The uart port that was intended to be used as a console could be initialized at a later point during boot and then registered as a console. This will avoid using uart port 0 as a unintended console port. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06Merge branch 'master' of ↵David S. Miller7-11/+203
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-07-05Merge branch 'at91/fixes' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-2.6-arm-soc * 'at91/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-2.6-arm-soc: AT91: Change nand buswidth logic to match hardware default configuration at91: Use "pclk" as con_id on at91cap9 and at91rm9200 at91: fix udc, ehci and mmc clock device name for cap9/9g45/9rl atmel_serial: fix internal port num at91: fix at91_set_serial_console: use platform device id
2011-07-04tty/serial: change of_serial to use new of_property_read_u32() apiGrant Likely1-22/+15
Simplifies the code a bit and drops a few lines. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-02tty: serial: samsung.c remove legacy PM code.MyungJoo Ham1-13/+14
This patch "modernize" tty/serial/samsung.c to use non-legacy code for suspend/resume. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-02SERIAL: SC26xx: Fix link error.Ralf Baechle1-1/+1
Kconfig allows enabling console support for the SC26xx driver even when it's configured as a module resulting in a: ERROR: "uart_console_device" [drivers/tty/serial/sc26xx.ko] undefined! modpost error since the driver was merged in eea63e0e8a60d00485b47fb6e75d9aa2566b989b [SC26XX: New serial driver for SC2681 uarts] in 2.6.25. Fixed by only allowing console support to be enabled if the driver is builtin. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: stable <stable@kernel.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-02serial: mrst_max3110: initialize waitqueue earlierMika Westerberg1-1/+2
The driver went to initialize its waitqueue at the start of the main processing thread. However, it is possible that this thread is not scheduled on a CPU before the write function is called which leads to a following error: BUG: spinlock bad magic on CPU#1, swapper/1 lock: f5f3ebdc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 Pid: 1, comm: swapper Not tainted 3.0.0-rc2+ #67 Call Trace: [<c1289663>] spin_bug+0xa3/0xf0 [<c12897ad>] do_raw_spin_lock+0x7d/0x150 [<c1490006>] ? init_idle+0x8d/0x20c [<c14963de>] _raw_spin_lock_irqsave+0x4e/0x60 [<c102f2bb>] ? __wake_up+0x1b/0x50 [<c102f2bb>] __wake_up+0x1b/0x50 [<c12d03bc>] ? uart_console_write+0x4c/0x60 [<c12d36c0>] ? serial_m3110_enable_ms+0x10/0x10 [<c12d3715>] serial_m3110_con_write+0x55/0x60 [<c1041575>] __call_console_drivers+0x75/0x90 [<c10415d9>] _call_console_drivers+0x49/0x80 [<c1041baa>] console_unlock+0xca/0x1f0 [<c10420ef>] vprintk+0x18f/0x4f0 [<c10787cb>] ? trace_hardirqs_on+0xb/0x10 [<c14928a3>] printk+0x18/0x1a [<c1042730>] register_console+0x2e0/0x350 [<c12d098e>] uart_add_one_port+0x33e/0x3d0 [<c10787cb>] ? trace_hardirqs_on+0xb/0x10 [<c103e10b>] ? try_to_wake_up+0x18b/0x250 [<c1485ba6>] serial_m3110_probe+0x1c2/0x1df [<c12d3d20>] ? serial_m3110_suspend+0x40/0x40 [<c1303db7>] spi_drv_probe+0x17/0x20 ... We fix this by initializing the waitqueue before the main thread is created. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-02mrst_max3110: Change max missing message priority.William Douglas1-1/+1
Change print message to notice instead of error to clean up non critcal messages showing on startup. The MAX3111 not being present is a normal path for end user systems. Signed-off-by: William Douglas <william.douglas@intel.com> [rebased on 3.0, switched to dev_dbg()] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-17 02:58:32 +0300