summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/sh-sci.c
AgeCommit message (Collapse)AuthorFilesLines
2015-10-04serial: sh-sci: Pass scatterlist to sci_dma_rx_push()Geert Uytterhoeven1-24/+24
Currently sci_dma_rx_push() has to find the active scatterlist itself, but in some cases the caller already knows. Hence let the caller pass the scatterlist, and introduce a helper to find the active DMA request while we're at it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Fix race condition between RX worker and cleanupGeert Uytterhoeven1-5/+14
During serial port shutdown, the DMA receive worker function may still be called after the receive DMA cleanup function has been called. Fix this race condition between work_fn_rx() and sci_rx_dma_release() by acquiring the port's spinlock in sci_rx_dma_release(). This requires releasing the spinlock in work_fn_rx() before calling (any function that may call) sci_rx_dma_release(). Terminate all active receive DMA descriptors to release them, and to make sure no more completions come in. Do the same in sci_tx_dma_release() for symmetry, although the serial upper layer will no longer submit more data at this point of time. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Fix exclusion of work_fn_rx and sci_dma_rx_completeKazuya Mizuguchi1-5/+7
There is a problem when the sci_dma_rx_complete() is processed before cancel process of work_fn_rx() completes by rx_timer_fn(). This patch locks work_fn_rx(). Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Do not resubmit DMA descriptorsGeert Uytterhoeven1-12/+18
Resubmission of DMA descriptors is explicitly forbidden by the DMA engine API. Hence pass DMA_CTRL_ACK to dmaengine_prep_slave_sg(), and prepare a new DMA descriptor instead of reusing the old one. Remove sci_port.desc_rx[], as there's no longer a need to access the active descriptor. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Simplify sci_submit_rx() error handlingGeert Uytterhoeven1-20/+20
Simplify the error handling in sci_submit_rx() by - Moving it to the end of the function, - Just calling dmaengine_terminate_all() instead of calling async_tx_ack() for all already submitted descriptors. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Stop acknowledging DMA transmit completionsGeert Uytterhoeven1-5/+0
As dmaengine_prep_slave_sg() is called with the DMA_CTRL_ACK flag set for DMA transmit requests, there's no need to explicitly acknowledge DMA transmit requests in the DMA transmit completion callback. Hence remove the call to async_tx_ack(), and remove the now unused dma_async_tx_descriptor pointer in the sci_port structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Switch to generic DMA residue handlingGeert Uytterhoeven1-7/+9
Convert the SCI driver from the SHDMAE-specific partial DMA transfer handling to the generic dmaengine residual data framework. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Use DMA submission helpers instead of open-codingGeert Uytterhoeven1-7/+7
Replace open-coded - calls to dma_async_tx_descriptor.tx_submit() by calls to the dmaengine_submit() helper, - dma_cookie_t comparisons by calls to dma_submit_error(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Fix TX buffer mapping leakGeert Uytterhoeven1-0/+2
The mapped transmit buffer is never unmapped. This leaks quite some mappings, as the mapping is done in uart_ops.startup(), i.e. every time the device is opened. Unmap the buffer on device close. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Switch to dma_map_single() for DMA transmissionGeert Uytterhoeven1-30/+20
Simplify the DMA transmit code by using dma_map_single() instead of constantly modifying the single-entry scatterlist to match what's currently being transmitted. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Use min_t()/max_t() instead of castsGeert Uytterhoeven1-2/+3
When comparing differently sized types, it's better to use min_t()/max_t() than adding casts. Also use "unsigned int" instead of "int", as that's the right type for the length of an SG entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Use correct device for DMA mapping with IOMMUGeert Uytterhoeven1-6/+8
To function correctly in the presence of an IOMMU, the DMA buffers must be managed using the DMA channel's device instead of the platform device's device. Make sure to free the DMA memory before releasing the channel, not after. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Handle DMA init failures inside sci_request_dma()Geert Uytterhoeven1-5/+7
Let sci_request_dma() handle failures to initialize DMA itself. This way sci_tx_dma_release() and sci_rx_dma_release() don't have to consider partial initialization, and thus don't need to reset DMA addresses to DMA_ERROR_CODE, which is not 100% portable access architectures. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Improve comments for DMA timeout calculationGeert Uytterhoeven1-7/+7
Reformat, grammar improvements, use "ms" instead of "msec". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Improve DMA error messagesGeert Uytterhoeven1-11/+16
Make the life of the driver developer/debugger easier: - Add __func__ prefix to identical messages, - Add DMA directions to messages, - Add TX failure messages, - Always use "cookie %d" for DMA cookies, - "#%d" is reserved for the DMA cookie/descriptor index. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Return IRQ_HANDLED when overrun if detectedYoshihiro Shimoda1-1/+3
This patch fix an issue that the driver may cause "nobody cared" IRQ when this driver detects the overrun flag only. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Remove bogus sci_handle_fifo_overrun() call on (H)SCIFGeert Uytterhoeven1-4/+1
Commit 8b6ff84c2d445a47 ("serial: sh-sci: Fix R-Car SCIF and HSCIF overrun handling") added overrun handling for (H)SCIF using the SCLSR register, but also accidentally added a bogus call to sci_handle_fifo_overrun() in the receive interrupt path. Remove it again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Remove useless memory allocation failure printksGeert Uytterhoeven1-7/+2
Printing an error on memory allocation failures is unnecessary. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Make sci_regmap[] constGeert Uytterhoeven1-11/+11
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Make sci_irq_desc[] constGeert Uytterhoeven1-2/+2
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Improve readability of sampling rate configurationGeert Uytterhoeven1-9/+8
Reorder sampling_rate assignment for consistency in all cases of the switch statement. Avoid using the ternary conditional operator to make it more clear that the value is overridden by platform data. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Drop path in reference to serial_core.cGeert Uytterhoeven1-1/+1
serial_core.c was moved from drivers/serial/ to drivers/tty/serial/ a while ago. Remove the path to make it move-proof. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Use SCSMR_CKS instead of hardcoded literal 3Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Use SCIF_DR instead of hardcoded literal 1Geert Uytterhoeven1-1/+2
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Correct SCIF_ERROR_CLEAR for plain SCIFGeert Uytterhoeven1-3/+11
SCIF_ERROR_CLEAR includes SCIFA_ORER, which exists only on SCIFA/SCIFB and SCIF on sh7705/sh7720/sh7721. To fix this: 1. Remove SCIFA_ORER from the definition of SCIF_ERROR_CLEAR, 2. During initialization, store the error clear mask to use, incorporating the overrun bit only if it applies to the SCxSR register. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04serial: sh-sci: Replace buggy big #ifdef by runtime logicGeert Uytterhoeven1-10/+26
The #ifdef logic to clear SCxSR bits using RMW on SCIFA/SCIFB and SCIF variants with some SCIFA features (sh7705/SH7720/sh7721) has several drawbacks: - It wasn't updated for newer R-Mobile variants (APE6), - It doesn't correctly handle SoCs with both SCIF and SCIFA/B (e.g. R-Car Gen2, but also legacy sh7723/sh7724), - It doesn't play well with ARM multi-platform kernels: on R-Car Gen2, SCIF/SCIFA/SCIFB/HSCIF were handled differently, depending on whether r8a7740 or sh73a0 support was enabled or not, Replace the #ifdef logic by runtime logic to fix this. SCIFA/SCIFB and SCIF on sh7705/sh7720/sh7721 use RMW to clear error bits, other variants use plain stores, as before. Note that this changes behavior for SCIFA on sh7723/sh7724 (these SoCs have both SCIF and SCIFA), which didn't use RMW before. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-27Merge tag 'tty-4.2-rc1' of ↵Linus Torvalds1-45/+51
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here's the tty and serial driver patches for 4.2-rc1. A number of individual driver updates, some code cleanups, and other minor things, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits) Doc: serial-rs485.txt: update RS485 driver interface Doc: tty.txt: remove mention of the BKL MAINTAINERS: tty: add serial docs directory serial: sprd: check for NULL after calling devm_clk_get serial: 8250_pci: Correct uartclk for xr17v35x expansion chips serial: 8250_pci: Add support for 12 port Exar boards serial: 8250_uniphier: add bindings document for UniPhier UART serial: core: cleanup in uart_get_baud_rate() serial: stm32-usart: Add STM32 USART Driver tty/serial: kill off set_irq_flags usage tty: move linux/gsmmux.h to uapi doc: dt: add documentation for nxp,lpc1850-uart serial: 8250: add LPC18xx/43xx UART driver serial: 8250_uniphier: add UniPhier serial driver serial: 8250_dw: support ACPI platforms with integrated DMA engine serial: of_serial: check the return value of clk_prepare_enable() serial: of_serial: use devm_clk_get() instead of clk_get() serial: earlycon: Add support for big-endian MMIO accesses serial: sirf: use hrtimer for data rx serial: sirf: correct the fifo empty_bit ...
2015-06-23sh-sci: Get register size from platform deviceYoshinori Sato1-21/+13
There is much SCI of SoC having within, and the register size is also different in everyone. So get from platform device. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2015-06-23sh-sci: Add h8300 SCIYoshinori Sato1-0/+6
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-05-10serial: sh-sci: Remove obsolete comment about overrun detectionGeert Uytterhoeven1-5/+0
The code it refers to was removed in commit b545e4f40613be70 ("serial: sh-sci: Compute overrun_bit without using baud rate algo"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10serial: sh-sci: Don't set SCLSR bits in the SCxSR error maskGeert Uytterhoeven1-1/+2
error_mask is the union of all error indicating bits in the SCxSR register, while overrun_mask may apply to a different register (SCLSR), depending on the SCI variant. Hence overrun_mask should only be ORed into error_mask if it applies to the SCxSR register. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10serial: sh-sci: Use the correct register for overrun checksGeert Uytterhoeven1-25/+15
The various SCI implementations use 3 different methods to signal overrun errors: - Bit SCI_ORER in register SCxSR on SCI, - Bit SCIFA_ORER in register SCxSR on SCIFA and SCIFB, and SCIF on SH7705/SH7720/SH7721, - Bit SCLSR_ORER in (optional!) register SCLSR on (H)SCIF. However: 1. sci_handle_fifo_overrun() a. handles (H)SCIF and SCIFA/SCIFB only, b. treats SCIF on SH7705/SH7720/SH7721 incorrectly, 2. sci_mpxed_interrupt() a. treats SCIF on SH7705/SH7720/SH7721 incorrectly, b. ignores that not all SCIFs have the SCLSR register, causing "Invalid register access" WARN()ings. To fix the above: 1. Determine and store the correct register enum during initialization, 2. Replace the duplicated buggy switch statements by using the stored register enum, 3. Add the missing existence check to sci_mpxed_interrupt(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10serial: sh-sci: Replace hardcoded overrun bit valuesGeert Uytterhoeven1-15/+13
Add the missing overrun bit definition for (H)SCIF. Replace overrun_bit by overrun_mask, so we can use the existing defines instead of hardcoded values. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10serial: sh-sci: Add SCIFA/B SCPCR register definitionsGeert Uytterhoeven1-0/+22
Add the register definitions for the Serial Port Control and Data Registers on SCIFA/SCIFB, which are needed for RTS/CTS pin control. Extracted from patches by Magnus Damm <damm+renesas@opensource.se>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-27serial: sh-sci: Update calculation of timeout for DMANobuhiro Iwamatsu1-9/+31
The current calculation method in the case of 9600bps, rounding error occurs has become setting that occur timeout faster than the required time. When we use 9600bps, 32byte buffer, 10 bit (CS8) and 100 HZ, it becomes 3 jiffies (30msec). In fact it is necessary 33msec. This updates to the calculation that are not actually less than the value set by the rounding error. Also, this is nothing will be calculated value when there is no load. If there are a lot of case load, overrun error will occur immediately. This is by the buffer size to be calculated twice the DMA buffer, and add the change of setting a sufficient time-out value. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-27serial: sh-sci: Add overrun handling of SCIFA and SCIFBNobuhiro Iwamatsu1-12/+36
SCIFA and SCIFB can detect the overrun, but it does not support. This adds overrun handling of SCIFA and SCIFB. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02serial: sh-sci: Fix R-Car SCIF and HSCIF overrun handlingHisashi Nakamura1-1/+13
When fifo overrun happened, the interrupt status refers to SCLSR register in R-Car SCIF and HSCIF. Thus, overrun handling takes SCLSR register into account. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02serial: sh-sci: Use dev_dbg() to log an error messageYoshihiro Kaneko1-1/+1
Since the driver cannot return from overrun error if characters are output during overrun process, use dev_dbg() instead of dev_notice() to log the error message of overrun in syslog. Based on a patch by Hisashi Nakamura. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02sh-sci: extend PM methodsSergei Shtylyov1-6/+3
In order to make it possible to restore from hibernation not only in Linux but also in e.g. U-Boot, we have to use sci_{suspend|remove}() for the PM {freeze| thaw|restore}() methods. It's handy to achieve this by using SIMPLE_DEV_PM_OPS() macro, however we have to annotate sci_{suspend|remove}() with '__maybe_unused' in order to avoid compilation warnings when CONFIG_PM_SLEEP is undefined. Based on orignal patch by Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-26serial: sh-sci: Change checking for error rate of HSCIFNobuhiro Iwamatsu1-4/+1
This changes negative values of error rate to be checked, because these values are valid as error rate. And this changes in the process of adopting a value close to 0. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-20tty: serial: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-15serial: sh-sci: use dmaengine_terminate_all() APIVinod Koul1-1/+1
The drivers should use dmaengine_terminate_all() API instead of accessing the device_control which will be deprecated soon Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-18serial: sh-sci: Add calculation recive margin for HSCIFNobuhiro Iwamatsu1-18/+59
When the error of the same bit rate is detected, we will need to select the recive margin is large. Current code holds the minimum error, it does not have to check the recive margin. This adds this calculation. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-18serial: sh-sci: Fix range check of bit-rate for HSCIFNobuhiro Iwamatsu1-2/+1
If bit-rate calculation result of HSCIF is expect 255 from 0, driver does not calculate error bit. However, we need to round the value to calculate error bit in the case of negative value. This rounds the value of bit-rate using clamp(), and bit-rate is the case of negative value, it enables the calculation of the error bit. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-18serial: sh-sci: Updated calculation of bit error rate and bit rateNobuhiro Iwamatsu1-3/+5
Currently, the decimal point is discarded calculation of BRR. Therefore, it can not calculate a value close to the correct value. This patch fixes this problem by using DIV_ROUND_CLOSEST. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10serial: treewide: Remove empty implementations of enable_ms()Alexander Shiyan1-8/+0
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-02Merge tag 'tty-3.15-rc1' of ↵Linus Torvalds1-43/+43
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg KH: "Here's the big tty/serial driver update for 3.15-rc1. Nothing major, a number of serial driver updates and a few tty core fixes as well. All have been in linux-next for a while" * tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty/serial: omap: empty the RX FIFO at the end of half-duplex TX tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX serial: sh-sci: Neaten dev_<level> uses serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF serial: sh-sci: Add more register documentation serial: sh-sci: Remove useless casts serial: sh-sci: Replace printk() by pr_*() serial_core: Avoid NULL pointer dereference in uart_close() serial_core: Get a reference for port->tty in uart_remove_one_port() serial: clps711x: Give a chance to perform useful tasks during wait loop serial_core: Grammar s/ports/port's/ serial_core: Spelling s/contro/control/ serial: efm32: properly namespace location property serial: max310x: Add missing #include <linux/uaccess.h> synclink: fix info leak in ioctl serial: 8250: Clean up the locking for -rt serial: 8250_pci: change BayTrail default uartclk serial: 8250_pci: more BayTrail error-free bauds serial: sh-sci: Add missing call to uart_remove_one_port() in failure path serial_core: Unregister console in uart_remove_one_port() ...
2014-03-19cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE}Viresh Kumar1-2/+1
Two cpufreq notifiers CPUFREQ_RESUMECHANGE and CPUFREQ_SUSPENDCHANGE have not been used for some time, so remove them to clean up code a bit. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-18serial: sh-sci: Neaten dev_<level> usesJoe Perches1-20/+18
Add missing newlines and coalesce formats. Realign arguments. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 02:27:22 +0300