summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/sc16is7xx.c
AgeCommit message (Collapse)AuthorFilesLines
2015-07-24sc16is7xx: fix FIFO address of secondary UARTBo Svangård1-7/+23
Calls to regmap_raw_read/write needed register rewrite in a similar way as function calls to regmap_read/write already had. This enables reading/writing the serial datastream to the device. Signed-off-by: Bo Svangård <bo.svangard@embeddedart.se> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01sc16is7xx: use kworker for RS-485 configurationJakub Kicinski1-12/+29
RS-485 configuration is also done under the spinlock so no blocking I/O allowed. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01sc16is7xx: use kworker to update ier bitsJakub Kicinski1-10/+19
.stop_rx/tx() are called in atomic context, we cannot use blocking I/O. While at it correct the name of RX bit and '*' placement in pointer declarations. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01sc16is7xx: use kworker for md_procJakub Kicinski1-16/+31
Convert md_proc into general async reconfiguration procedure. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01sc16is7xx: move RTS delay to workqueueJakub Kicinski1-8/+6
Instead of spinning under port->lock let's just sleep inside the kthread. It should be equivalent as TX cannot proceed when thread is blocked. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01sc16is7xx: use kthread_worker for tx_work and irqJakub Kicinski1-23/+43
Convert workqueue usage to a real-time kworker. The problem with workqueues is that we cannot set real-time priorities on our work and asynchronous reconfiguration can be blocked by less important tasks. We need kthread for the interrupt anyway and because we will now be using single kthread for all TX-related operations we can get rid of the port mutex. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01sc16is7xx: use LSR_TEMT_BIT in .tx_empty()Jakub Kicinski1-3/+2
LSR_TEMT_BIT (LSR bit 6) provides us exactly the information we need to determine if transmission is finished - FIFO level and shift register empty. We can save ourselves reading FIFO level explicitly if we use this bit. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01sc16is7xx: add missing compatible stringsJakub Kicinski1-0/+4
Without matching bus-specific strings driver will not be loaded automatically. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01sc16is7xx: remove RS-485 delay RTS handlingJakub Kicinski1-15/+8
Users of RS-485 can request via ioctl that RTS signals should be activated selected number of milliseconds before the actual data transmission or delay reception certain number of milli- seconds after the transmission is finished. In sc16is7xx, however, RTS signalling is handled by the hardware and driver has no way of providing this feature. We still try to provide .delay_rts_before_send by delaying transmission but without actual effect on the RTS line. Note: this change will make the driver return -EINVAL when the feature is requested (.delay_rts_after_send is set). Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01sc16is7xx: spi interface is addedRama Kiran Kumar Indrakanti1-1/+104
spi interface for sc16is7xx is added along with Kconfig flag to enable spi or i2c, thus in a instance we can have either spi or i2c or both, in sync to the hw. Signed-off-by: Rama Kiran Kumar Indrakanti <indrakanti_ram@hotmail.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-10sc16is7xx: expose RTS inversion in RS-485 modeJakub Kicinski1-9/+25
Hardware is capable of inverting RTS signal when working in RS-485 mode. Expose this functionality to user space. Relay on a matching combination of standard flags (SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND) to detect when user space is requesting inverted RTS mode. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-27sc16is7xx: enable the clockJakub Kicinski1-0/+1
Although clk_disable_unprepare() is called both on .remove() and in .probe() error path, the clock is never actually enabled. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-27sc16is7xx: don't wipe out port configuration on shutdownJakub Kicinski1-3/+5
EFCR register contains RS-485 configuration which should not be changed by shutdown. Instead of doing a write only update the appropriate bits. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-27sc16is7xx: remove ports on probe error pathJakub Kicinski1-0/+3
If ports are not explicitly removed on the error path the device will not get properly unregistered leaving /dev/ttySC* nodes in the filesystem. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial/sc16is7xx: Use the rs485 functions on serial_coreRicardo Ribalda Delgado1-41/+12
In order to unify all the rs485 ioctl handling. Use the implementation of TIOC[GS]RS485 ioctl handling on serial_core. Reviewed-by: Alan Cox <alan@linux.intel.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06serial/sc16is7xx: Remove obsolete #ifset TIOC[SG]RS485Ricardo Ribalda Delgado1-4/+0
Commit e676253b19b2 ("serial/8250: Add support for RS485 IOCTLs") added references to TIOC[SG]RS48 on 8250_core.c. This change triggered the need to define them in all the arches that uses tty/serial. This made #ifdef TIOC[SG]RS48 obsolete. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23tty: sc16is7xx: remove retval from gpiochip_remove()Linus Walleij1-8/+5
We are trying to smoke out the use of the return value from gpiochip_remove() from the kernel, this has been missed. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-27serial: sc16is7xx: Correct initialization of s->clkJon Ringle1-5/+4
The s->clk never gets setup in sc16is7xx_probe() and instead was using a local clk variable, but then testing the uninitialized s->clk during teardown Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10serial: treewide: Remove empty implementations of enable_ms()Alexander Shiyan1-1/+0
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28serial: sc16is7xx: dynamically allocate tx/rx bufferJon Ringle1-9/+8
This fixes the warnings: drivers/tty/serial/sc16is7xx.c: In function 'sc16is7xx_handle_rx': >> drivers/tty/serial/sc16is7xx.c:548:1: warning: 'sc16is7xx_handle_rx' uses dynamic stack allocation [enabled by default] drivers/tty/serial/sc16is7xx.c: In function 'sc16is7xx_handle_tx': >> drivers/tty/serial/sc16is7xx.c:589:1: warning: 'sc16is7xx_handle_tx' uses dynamic stack allocation [enabled by default] Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28serial: sc16is7xx: compile I2C when REGMAP_I2C is moduleJan Moskyto Matejka1-2/+0
drivers/tty/serial/sc16is7xx.c:1060:12: warning: 'sc16is7xx_probe' defined but not used [-Wunused-function] static int sc16is7xx_probe(struct device *dev, ^ drivers/tty/serial/sc16is7xx.c:1176:12: warning: 'sc16is7xx_remove' defined but not used [-Wunused-function] static int sc16is7xx_remove(struct device *dev) ^ drivers/tty/serial/sc16is7xx.c:1215:29: warning: 'regcfg' defined but not used [-Wunused-variable] static struct regmap_config regcfg = { ^ Fixed these warnings by removing the `#ifdef CONFIG_REGMAP_I2C' around their calls as this driver selects REGMAP_I2C in Kconfig. This part of driver just didn't compile at all when REGMAP_I2C configured as module (CONFIG_REGMAP_I2C is not defined, just CONFIG_REGMAP_I2C_MODULE). Signed-off-by: Jan Moskyto Matejka <mq@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-26serial: sc16is7xx: fix implicit decl of func copy_{to,from}_userJon Ringle1-0/+1
Fix by including linux/uaccess.h: drivers/tty/serial/sc16is7xx.c: In function 'sc16is7xx_ioctl': >> drivers/tty/serial/sc16is7xx.c:861:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration] >> drivers/tty/serial/sc16is7xx.c:867:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration] Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-25serial: sc16is7xxJon Ringle1-0/+1279
The SC16IS7xx is a slave I2C-bus/SPI interface to a single-channel high performance UART. The SC16IS7xx's internal register set is backward-compatible with the widely used and widely popular 16C450. The SC16IS7xx also provides additional advanced features such as auto hardware and software flow control, automatic RS-485 support, and software reset. Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-22 23:14:24 +0300