Age | Commit message (Expand) | Author | Files | Lines |
2016-03-08 | tty/serial: at91: fix bad offset for UART timeout register | Ludovic Desroches | 1 | -6/+13 |
2016-03-08 | tty/serial: at91: restore dynamic driver binding | Romain Izard | 1 | -1/+34 |
2016-02-07 | serial: atmel: Use atmel_port consistently | Jaeden Amero | 1 | -47/+48 |
2016-02-07 | serial: atmel: add support for new UART version | Nicolas Ferre | 1 | -3/+4 |
2016-02-07 | serial: atmel: trivial: clean the IP version decoding code | Nicolas Ferre | 1 | -16/+16 |
2016-01-09 | drivers/tty/serial: delete unused MODULE_DEVICE_TABLE from atmel_serial.c | Paul Gortmaker | 1 | -2/+0 |
2015-12-14 | drivers/tty/serial: make serial/atmel_serial.c explicitly non-modular | Paul Gortmaker | 1 | -41/+4 |
2015-12-14 | serial: atmel: convert to irq handling provided mctrl-gpio | Uwe Kleine-König | 1 | -122/+18 |
2015-10-18 | serial: at91, fix rs485 properties | Jiri Slaby | 1 | -3/+2 |
2015-10-18 | serial: atmel: fix compiler warning on address cast | Andre Przywara | 1 | -1/+1 |
2015-10-12 | Merge 4.3-rc5 into tty-next | Greg Kroah-Hartman | 1 | -1/+1 |
2015-10-04 | serial: atmel: fix error path of probe function | Uwe Kleine-König | 1 | -1/+1 |
2015-10-04 | serial: mctrl-gpio: rename init function | Uwe Kleine-König | 1 | -1/+1 |
2015-10-04 | serial: atmel: allow compile testing on non-atmel architectures | Uwe Kleine-König | 1 | -6/+6 |
2015-10-04 | tty/serial: at91: move ATMEL_MAX_UART | Alexandre Belloni | 1 | -0/+6 |
2015-08-05 | tty/serial: at91: fix I/O accesses on RHR and THR for AVR32 | Cyrille Pitchen | 1 | -10/+27 |
2015-07-24 | tty/serial: at91: use 32bit writes into TX FIFO when DMA is enabled | Cyrille Pitchen | 1 | -15/+51 |
2015-07-24 | tty/serial: at91: add support to FIFOs | Cyrille Pitchen | 1 | -6/+94 |
2015-07-24 | tty/serial: at91: remove bunch of macros to access UART registers | Cyrille Pitchen | 1 | -154/+159 |
2015-05-24 | tty/serial: at91: RS485 mode: 0 is valid for delay_rts_after_send | Nicolas Ferre | 1 | -6/+3 |
2015-05-06 | tty/serial: at91: handle IRQ status more safely | Leilei Zhao | 1 | -6/+7 |
2015-04-28 | tty/serial: at91: maxburst was missing for dma transfers | Ludovic Desroches | 1 | -0/+2 |
2015-03-09 | Merge 4.0-rc3 into tty-testing | Greg Kroah-Hartman | 1 | -12/+17 |
2015-03-07 | tty/serial: at91: correct the usage of tasklet | Leilei Zhao | 1 | -0/+4 |
2015-03-07 | tty/serial: at91: set ops in property init each time | Leilei Zhao | 1 | -0/+1 |
2015-03-07 | tty/serial: at91: revise the return type of atmel_init_property | Leilei Zhao | 1 | -4/+3 |
2015-03-07 | tty/serial: at91: correct buffer size used in DMA | Leilei Zhao | 1 | -1/+1 |
2015-03-07 | tty/serial: at91: correct check of buf used in DMA | Leilei Zhao | 1 | -2/+2 |
2015-03-07 | serial: atmel: fix error handling when mctrl_gpio_init fails | Uwe Kleine-König | 1 | -5/+6 |
2015-03-06 | tty: serial: atmel: rework interrupt and wakeup handling | Boris BREZILLON | 1 | -4/+45 |
2015-01-10 | tty/serial: at91: fix typo and indentation | Cyrille Pitchen | 1 | -18/+22 |
2015-01-10 | tty/serial: at91: fix RTS line management when hardware handshake is enabled | Cyrille Pitchen | 1 | -30/+61 |
2015-01-10 | tty/serial: at91: fix error handling in atmel_serial_probe() | Cyrille Pitchen | 1 | -1/+3 |
2015-01-10 | tty/serial: at91: enable peripheral clock before accessing I/O registers | Cyrille Pitchen | 1 | -0/+12 |
2015-01-10 | tty/serial: at91: use correct type for dma_sync_*_for_cpu() and dma_sync_*_fo... | Cyrille Pitchen | 1 | -3/+3 |
2014-12-15 | Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel... | Linus Torvalds | 1 | -1/+0 |
2014-11-07 | tty/serial_core: Introduce lock mechanism for RS485 | Ricardo Ribalda Delgado | 1 | -6/+4 |
2014-11-07 | serial/atmel: Use the rs485 functions on serial_core | Ricardo Ribalda Delgado | 1 | -55/+24 |
2014-11-07 | serial: Test/disable MSIs if switching from N_PPS | Peter Hurley | 1 | -0/+5 |
2014-11-07 | serial: Take uart port lock for direct *_enable_ms() | Peter Hurley | 1 | -0/+2 |
2014-11-07 | serial: core: Pass termios to set_ldisc() notifications | Peter Hurley | 1 | -2/+2 |
2014-11-07 | serial: at91: Use dmaengine_slave_config API | Maxime Ripard | 1 | -6/+4 |
2014-11-07 | tty/serial: at91: fix rx ring buffer management | Cyrille Pitchen | 1 | -39/+55 |
2014-11-06 | serial: Refactor uart_flush_buffer() from uart_close() | Peter Hurley | 1 | -13/+15 |
2014-10-20 | tty: serial: drop owner assignment from platform_drivers | Wolfram Sang | 1 | -1/+0 |
2014-10-19 | Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma | Linus Torvalds | 1 | -0/+1 |
2014-10-16 | serial: atmel: add missing dmaengine header | Vinod Koul | 1 | -0/+1 |
2014-09-09 | tty/serial: at91: BUG: disable interrupts when !UART_ENABLE_MS() | Richard Genoud | 1 | -1/+42 |
2014-07-23 | drivers/tty/serial: use correct type for dma_map/unmap | Wolfram Sang | 1 | -4/+4 |
2014-06-20 | serial: Fix IGNBRK handling | Peter Hurley | 1 | -1/+1 |