| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: typec: tipd: fix use of device-specific init function
usb: typec: tipd: Separate reset for TPS6598x
usb: mon: Fix atomicity violation in mon_bin_vma_fault
usb: gadget: uvc: Remove nested locking
usb: gadget: uvc: Fix use are free during STREAMOFF
usb: typec: class: fix typec_altmode_put_partner to put plugs
dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
dt-bindings: usb: xhci: Add num-hc-interrupters definition
xhci: add support to allocate several interrupters
USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8939: Drop RPM bus clocks
arm64: dts: qcom: sdm630: Drop RPM bus clocks
arm64: dts: qcom: qcs404: Drop RPM bus clocks
arm64: dts: qcom: msm8996: Drop RPM bus clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into char-misc-next
Mika writes:
thunderbolt: Changes for v6.8 merge window
This includes following USB4/Thunderbolt changes for the v6.8 merge
window:
- Intel Lunar Lake support
- PCIe tunneling improvements
- DisplayPort tunneling improvements
- Asymmetric switching improvements
- Couple of minor fixes and cleanups.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Reduce retry timeout to speed up boot for some devices
thunderbolt: Keep link as asymmetric if preferred by hardware
thunderbolt: Add support for Intel Lunar Lake
thunderbolt: Disable PCIe extended encapsulation upon teardown properly
thunderbolt: Make PCIe tunnel setup and teardown follow CM guide
thunderbolt: Improve logging when DisplayPort resource is added due to hotplug
thunderbolt: Use tb_dp_read_cap() to read DP_COMMON_CAP as well
thunderbolt: Disable CL states only when actually needed
thunderbolt: Transition link to asymmetric only when both sides support it
thunderbolt: Log XDomain link speed and width
thunderbolt: Move width_name() helper to tb.h
thunderbolt: Handle lane bonding of Gen 4 XDomain links properly
thunderbolt: Unwind TMU configuration if tb_switch_set_tmu_mode_params() fails
thunderbolt: Remove duplicated re-assignment of pointer 'out'
|
|
This is a followup to "thunderbolt: Workaround an IOMMU fault on certain
systems with Intel Maple Ridge".
It seems like the timeout can be reduced to 250ms. This reduces the overall
delay caused by the retires to ~1s. This is about the time other things
being initialized in parallel need anyway*, so like this the effective boot
time is no longer compromised.
*I only had a single device available for my measurements: A Clevo X170KM-G
desktop replacement notebook.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
In case of the link is brought up as asymmetric (due to hardware preference), we
honor that and don't transition it to symmetric, unless a router with symmetric
link got plugged below, in the topology (and a bandwidth allows transition to
symmetric).
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the tb_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: <linux-usb@vger.kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/2023121904-utopia-broadcast-06d1@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Intel Lunar Lake has similar integrated Thunderbolt/USB4 controller as
Intel Meteor Lake with some small differences in the host router (it has
3 DP IN adapters for instance). Add the Intel Lunar Lake PCI IDs to the
driver list of supported devices.
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
In case of PCIe tunnel teardown (including if caused by router unplug),
PCIe extended encapsulation bit should be cleared in downstream and
upstream routers accordingly.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The USB4 Connection Manager guide suggests that the PCIe paths are
enabled from the upstream adapter to the downstream adapter and vice
versa on disable so make the driver follows this sequence.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
To allow us differentiate how DisplayPort resource is added to the
DisplayPort resources list make the debug log to append "hotplug" when
this was due to an actual hotplug.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
There is no point doing this separately as the register layout is the
same. For this reason rename tb_dp_read_dprx() to tb_dp_wait_dprx() and
call tb_dp_read_cap() instead.
While there add debug log if the DPRX capability read times out.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
If there is not going to be an actual transition to asymmetric or
symmetric, there is no point to disable and re-enable CL states either.
So instead disable them only when we know that an actual transition is
going to take place.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We can transition Gen 4 link to asymmetric only when both sides of the
link support it in the required direction. For this reason make sure
that the downstream adapter also supports asymmetric link before
starting the transition.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
In the same way we do for routers. This is useful for debugging
purposes.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We are going to use it in subsequent patches, so make it available outside of
switch.c. Also, change the name to tb_width_name() to follow the naming
conventions.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Gen 4 links come up as bonded already so we are not supposed to initiate
lane bonding on them. However, we should still update the port
structures accordingly. Split these into their own functions to make it
easier to follow.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Dan reported that the kernel test robot found an issue with the TMU code
namely in tb_switch_tmu_change_mode() where we should actually go back
to the previous mode in case of failure instead of just returning back
the error. Fix this by unwinding the configuration as we do with the
other error paths in this function.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202311030814.AXtCk7PO-lkp@intel.com/
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
With the current bandwidth allocation we end up reserving too much for the USB
3.x and PCIe tunnels that leads to reduced capabilities for the second
DisplayPort tunnel.
Fix this by decreasing the USB 3.x allocation to 900 Mb/s which then allows
both tunnels to get the maximum HBR2 bandwidth. This way, the reserved
bandwidth for USB 3.x and PCIe, would be 1350 Mb/s (taking weights of USB 3.x
and PCIe into account). So bandwidth allocations on a link are:
USB 3.x + PCIe tunnels => 1350 Mb/s
DisplayPort tunnel #1 => 17280 Mb/s
DisplayPort tunnel #2 => 17280 Mb/s
Total consumed bandwidth is 35910 Mb/s. So that all the above can be tunneled
on a Gen 3 link (which allows maximum of 36000 Mb/s).
Fixes: 582e70b0d3a4 ("thunderbolt: Change bandwidth reservations to comply USB4 v2")
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The dentry returned by debugfs_lookup() needs to be released by calling
dput() which is missing in margining_port_remove(). Fix this by calling
debugfs_lookup_and_remove() that combines both and avoids the memory leak.
Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining")
Cc: stable@vger.kernel.org
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
When pairing DP IN and DP OUT adapters for DisplayPort tunneling, we
should prioritize the possible external GPU DP IN adapters to take
advantage of the its capabilities. However the commit in question did
this for host router DP IN adapters too and that changes ordering of the
initial DP IN resources in such way that resuming from suspend may end
up using different resource and that may confuse the user.
Fix this so that we only put DP IN adapters of device routers to the top
of the resource list and leave host routers as is.
Fixes: 274baf695b08 ("thunderbolt: Add DP IN added last in the head of the list of DP resources")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We should send uevent to userspace whenever the link speed or width
changes but tb_switch_asym_enable() and tb_switch_asym_disable() set the
sw->link_width already so tb_switch_update_link_attributes() never
noticed the change.
Fix this so that we let tb_switch_update_link_attributes() update the
fields accordingly.
Fixes: 81af2952e606 ("thunderbolt: Add support for asymmetric link")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix the lane bonding procedure to follow the steps described in USB4
Connection Manager guide. Hence, set the lane bonding bit only for
downstream port. This is needed for certain ASMedia device, otherwise
lane bonding fails and the device disconnects.
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The pointer 'out' is initialized and then a few statements later being
re-assigned the same value. The second re-assignment is redundant and
can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.7 merge window
This includes following USB4/Thunderbolt changes for the v6.7 merge
window:
- Configure asymmetric link if the DisplayPort bandwidth requires so
- Enable path power management packet support for USB4 v2 routers
- Make the bandwidth reservations to follow the USB4 v2 connection
manager guide suggestions
- DisplayPort tunneling improvements
- Small cleanups and improvements around the driver.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (25 commits)
thunderbolt: Fix one kernel-doc comment
thunderbolt: Configure asymmetric link if needed and bandwidth allows
thunderbolt: Add support for asymmetric link
thunderbolt: Introduce tb_switch_depth()
thunderbolt: Introduce tb_for_each_upstream_port_on_path()
thunderbolt: Introduce tb_port_path_direction_downstream()
thunderbolt: Set path power management packet support bit for USB4 v2 routers
thunderbolt: Change bandwidth reservations to comply USB4 v2
thunderbolt: Make is_gen4_link() available to the rest of the driver
thunderbolt: Use weight constants in tb_usb3_consumed_bandwidth()
thunderbolt: Use constants for path weight and priority
thunderbolt: Add DP IN added last in the head of the list of DP resources
thunderbolt: Create multiple DisplayPort tunnels if there are more DP IN/OUT pairs
thunderbolt: Log NVM version of routers and retimers
thunderbolt: Use tb_tunnel_xxx() log macros in tb.c
thunderbolt: Expose tb_tunnel_xxx() log macros to the rest of the driver
thunderbolt: Use tb_tunnel_dbg() where possible to make logging more consistent
thunderbolt: Fix typo of HPD bit for Hot Plug Detect
thunderbolt: Fix typo in enum tb_link_width kernel-doc
thunderbolt: Fix debug log when DisplayPort adapter not available for pairing
...
|
|
Fix a spelling errors in kernel doc comment, silence the warning:
drivers/thunderbolt/tb.c:760: warning: expecting prototype for tb_maximum_banwidth(). Prototype was for tb_maximum_bandwidth() instead
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7048
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
USB4 v2 spec defines a Gen 4 link that can operate as an asymmetric
120/40G. When the link is asymmetric, the USB4 port on one side of the
link operates with three TX lanes and one RX lane, while the USB4 port
on the opposite side of the link operates with three RX lanes and one TX
lane. Using asymmetric link we can get much more bandwidth from one
direction and that allows us to support the new Ultra High Bit Rate
DisplayPort modes (that consume up to 77.37 Gb/s).
Add the basic logic for changing Gen 4 links to asymmetric and back
following the below rules:
1) The default threshold is 45 Gb/s (tunable by asym_threshold)
2) When DisplayPort tunnel is established, or when there is bandwidth
request through bandwidth allocation mode, the links can be
transitioned to asymmetric or symmetric (depending on the
required bandwidth).
3) Only DisplayPort bandwidth on a link, is taken into account when
deciding whether a link is transitioned to asymmetric or symmetric
4) If bandwidth on a link is >= asym_threshold transition the link to
asymmetric
5) If bandwidth on a link < asym_threshold transition the link to
symmetric (unless the bandwidth request is above currently
allocated on a tunnel).
6) If a USB4 v2 device router with symmetric link is connected,
transition all the links above it to symmetric if the bandwidth
allows.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
USB4 v2 spec defines a Gen 4 link that can operate as an aggregated
symmetric (80/80G) or asymmetric (120/40G). When the link is asymmetric,
the USB4 port on one side of the link operates with three TX lanes and
one RX lane, while the USB4 port on the opposite side of the link
operates with three RX lanes and one TX lane.
Add support for the asymmetric link and provide functions that can be
used to transition the link to asymmetric and back.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This is useful helper to find out the depth of a connected router.
Convert the existing users to call this helper instead of open-coding.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This is useful when walking over upstream lane adapters over given path.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Introduce tb_port_path_direction_downstream() to check if path from
source adapter to destination adapter is directed towards downstream.
Convert existing users to call this helper instead of open-coding.
No functional changes.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
USB4 v2 spec allows USB4 links that are part of a pass through tunnel
(such as DisplayPort and USB 3.x Gen T) to enter lower CL states, which
provide better power management. For this USB4 v2 routers in their path
config space of lane 0 adapter include a new bit PMPS (PM packet
support) that needs to be set.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
USB4 v2 Connection Manager guide (section 6.1.2.3) suggests to reserve
bandwidth in a sligthly different manner. It suggests to keep minimum of
1500 Mb/s for each path that carry a bulk traffic. Here we change the
bandwidth reservations to comply to the above for USB 3.x and PCIe
protocols over Gen 4 link, taking weights into account (that's 1500 Mb/s
for PCIe and 3000 Mb/s for USB 3.x).
For Gen 3 and below we use the existing reservation.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Rework the function to return the link generation, update the name to
tb_port_get_link_generation(), and make available to the rest of the
driver. This is needed in the subsequent patches.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Instead of magic numbers use the constants we introduced in the previous
commit to make the code more readable. No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Makes it easier to follow and update. No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fix for v6.6-rc7
This includes a single commit that fixes a memory leak when DisplayPort
bandwidth allocation request is being handled by the driver.
This has been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Call tb_switch_put() once DisplayPort bandwidth request is finished
|
|
If DP IN on device router exist, position it at the beginning of the DP
resources list, so that it is used before DP IN on host router. This way
external GPU will be prioritized when pairing DP IN and DP OUT for
DisplayPort tunnel setup.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
pairs
Currently we only create one DisplayPort tunnel even if there would be
more DP IN/OUT pairs available. Specifically this happens when a router
is unplugged and we check if a new DisplayPort tunnel can be created. To
cover this create tunnels as long as we find suitable DP IN/OUT pairs.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This is useful when debugging possible issues.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Now that the macros are available we can use them in tb.c. This makes
the log output more consistent.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
In order to allow more consistent logging of tunnel related information
make these logging macros available to the rest of the driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This makes it easier to find out the tunnel in question. Also drop a
couple of lines that generate duplicate information.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix typo of HPD bit stands for Hot Plug Detect.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Fix debug log when looking for a DisplayPort adapter pair of DP IN and
DP OUT. In case of no DP adapter available, log the type of the DP
adapter that is not available.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
There is no point disabling CL states if the router is unplugged so in
that case return early.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This function is not used outside of clx.c so make it static. No
functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
It turns out there is no need to use the actual link rate when
reclaiming bandwidth for USB 3.x. The reason is that we use consumed
bandwidth which is coming from xHCI when releasing bandwidth (for
example for DisplayPort tunneling) and this can be anything between
1000 Mb/s to maximum, so when reclaiming we can just bump it up back to
maximum instead of actual link rate (which is always <= maximum).
This allows us to get rid of couple of unnecessary lines of code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Since we have it, use it in the DMA test driver as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
When handling DisplayPort bandwidth request tb_switch_find_by_route() is
called and it returns a router structure with reference count increased.
In order to avoid resource leak call tb_switch_put() when finished.
Fixes: 6ce3563520be ("thunderbolt: Add support for DisplayPort bandwidth allocation mode")
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This is not needed when firmware connection manager is run so limit this
to software connection manager.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
