summaryrefslogtreecommitdiff
path: root/drivers/thermal/st
AgeCommit message (Collapse)AuthorFilesLines
2021-06-14thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()Yang Yingliang1-11/+2
Use devm_platform_get_and_ioremap_resource() to simplify code and remove error message which within devm_platform_get_and_ioremap_resource() already. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210605120205.2459578-1-yangyingliang@huawei.com
2020-10-12thermal: stm32: simplify the return expression of stm_thermal_prepare()Qinglang Miao1-6/+1
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200921131107.93273-1-miaoqinglang@huawei.com
2020-10-12drivers: thermal: Kconfig: fix spelling mistake "acces" -> "access"Colin Ian King1-1/+1
There is a spelling mistake in the Kconfig text, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200810082739.48007-1-colin.king@canonical.com
2020-06-29thermal: Explicitly enable non-changing thermal zone devicesAndrzej Pietrasiewicz1-0/+5
Some thermal zone devices never change their state, so they should be always enabled. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-9-andrzej.p@collabora.com
2020-04-14thermal: Delete an error message in four functionsMarkus Elfring2-6/+2
The function “platform_get_irq” can log an error already. Thus omit redundant messages for the exception handling in the calling functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/05f49ae7-5cc7-d6a0-fc3d-abaf2a0b373c@web.de
2020-03-21thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_tClark Williams1-1/+2
The spinlock pkg_temp_lock has the potential of being taken in atomic context because it can be acquired from the thermal IRQ vector. It's static and limited scope so go ahead and make it a raw spinlock. Signed-off-by: Clark Williams <williams@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191008110021.2j44ayunal7fkb7i@linutronix.de
2020-01-31thermal: stm32: fix spelling mistake "preprare" -> "prepare"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200130100537.18069-1-colin.king@canonical.com
2020-01-27thermal: stm32: Fix low threshold interrupt floodPascal Paillet1-1/+2
With the STM32 thermal peripheral, it is not possible to dump the temperature that has caused the interrupt. When the temperature reaches the low threshold, we generally read a temperature that is a little bit higher than the low threshold. This maybe due to sampling precision, and also because the CPU becomes hotter when it quits WFI mode. In that case, the framework does not change the trip points. This leads to a lot of low threshold interrupts. The fix is to set the low threshold value 0.5 degrees Celsius below the actual request. The problem is not so frequent with the high threshold and it would no be a good idea to set the threshold value higher than the request. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200110101605.24984-7-p.paillet@st.com
2020-01-27thermal: stm32: Improve temperature computingPascal Paillet1-44/+14
Change the way of computing to avoid rounds by 1 or 2 degrees. Also simplify the sampling time management that is hard-coded to maximum value during probe. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200110101605.24984-6-p.paillet@st.com
2020-01-27thermal: stm32: Handle multiple trip pointsPascal Paillet1-212/+86
Let the thermal framework handle the trip points instead of custom code inside the driver. This is backward compatible, simplifies the driver and offers the possibility to the user to set any trip point he needs. stm_thermal_set_trips callback that is registered to set_trips ops to handle the low and high thresholds and replaces stm_thermal_set_threshold and stm_thermal_update_threshold functions. modify irq enable to handle the thresholds. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200110101605.24984-5-p.paillet@st.com
2020-01-27thermal: stm32: Disable interrupts at probePascal Paillet1-5/+14
In case of CPU reset, the interrupts could be enabled at boot time. Disable interrupts and clear flags. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200110101605.24984-4-p.paillet@st.com
2020-01-27thermal: stm32: Rework sensor mode managementPascal Paillet1-6/+4
Be sure get_temp returns an error while disabling or enabling the device. Set THERMAL_DEVICE_ENABLED state at the end of power on function. Set THERMAL_DEVICE_DISABLED state at the beginning of power off function. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200110101605.24984-3-p.paillet@st.com
2020-01-27thermal: stm32: Fix icifr register namePascal Paillet1-5/+5
Fix a mistake with the ICIFR register name. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200110101605.24984-2-p.paillet@st.com
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner4-21/+4
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14thermal: stm32: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: Kconfig: pedantic cleanupsEnrico Weigelt, metux IT consult1-11/+11
Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-06Merge branch 'next' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Add locking for cooling device sysfs attribute in case the cooling device state is changed by userspace and thermal framework simultaneously. (Thara Gopinath) - Fix a problem that passive cooling is reset improperly after system suspend/resume. (Wei Wang) - Cleanup the driver/thermal/ directory by moving intel and qcom platform specific drivers to platform specific sub-directories. (Amit Kucheria) - Some trivial cleanups. (Lukasz Luba, Wolfram Sang) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal/intel: fixup for Kconfig string parsing tightening up drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir drivers: thermal: Move various drivers for intel platforms into a subdir thermal: Fix locking in cooling device sysfs update cur_state Thermal: do not clear passive state during system sleep thermal: zx2967_thermal: simplify getting .driver_data thermal: st: st_thermal: simplify getting .driver_data thermal: spear_thermal: simplify getting .driver_data thermal: rockchip_thermal: simplify getting .driver_data thermal: int340x_thermal: int3400_thermal: simplify getting .driver_data thermal: remove unused function parameter
2019-01-06Merge branch 'linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal SoC updates from Eduardo Valentin: - Tegra DT binding documentation for Tegra194 - Armada now supports ap806 and cp110 - RCAR thermal now supports R8A774C0 and R8A77990 - Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom, Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers. * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits) thermal: generic-adc: Fix adc to temp interpolation thermal: rcar_thermal: add R8A77990 support dt-bindings: thermal: rcar-thermal: add R8A77990 support thermal: rcar_thermal: add R8A774C0 support dt-bindings: thermal: rcar-thermal: add R8A774C0 support dt-bindings: cp110: document the thermal interrupt capabilities dt-bindings: ap806: document the thermal interrupt capabilities MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver thermal: armada: add overheat interrupt support thermal: st: fix Makefile typo thermal: uniphier: Convert to SPDX identifier thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro dt-bindings: thermal: tegra-bpmp: Add Tegra194 support thermal: imx: save one condition block for normal case of nvmem initialization thermal: imx: fix for dependency on cpu-freq thermal: tsens: qcom: do not create duplicate regmap debugfs entries thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy() dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts thermal: broadcom: use devm_thermal_zone_of_sensor_register ...
2019-01-02thermal: st: fix Makefile typoArnd Bergmann1-1/+1
When STM32_THERMAL is enabled, this overrides all previously enabled files in the same directory, as seen from this link failure: ERROR: "st_thermal_pm_ops" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! ERROR: "st_thermal_register" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! ERROR: "st_thermal_unregister" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! The correct syntax in Makefile requires using += instead of :=. Fixes: 1d6931556073 ("thermal: add stm32 thermal driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-11thermal: stm32: Fix stm_thermal_read_factory_settingsDavid HERNANDEZ SANCHEZ1-2/+2
Adding brackets allows to multiply the register value, masked by TS1_RAMP_COEFF_MASK, by an ADJUST value properly and not to multiply ADJUST by register value and then mask the whole. Fixes: 1d693155 ("thermal: add stm32 thermal driver") Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-11thermal: stm32: read factory settings inside stm_thermal_prepareDavid HERNANDEZ SANCHEZ1-4/+4
Calling stm_thermal_read_factory_settings before clocking internal peripheral causes bad register values and makes temperature computation wrong. Calling stm_thermal_read_factory_settings inside stm_thermal_prepare fixes this problem as internal peripheral is well clocked at this stage. Fixes: 1d693155 ("thermal: add stm32 thermal driver") Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-11-30thermal: st: st_thermal: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-10-25thermal: add stm32 thermal driverDavid HERNANDEZ SANCHEZ3-0/+775
Add support for DTS thermal sensor that can be found on some STM32 platforms. This driver is based on OF and works in interrupt mode. It offers two temperature trip points: passive and critical. The first is intended for passive cooling notification while the second is used for over-temperature reset. Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-09-27thermal: Enhance thermal_zone_device_update for eventsSrinivas Pandruvada1-1/+2
Added one additional parameter to thermal_zone_device_update() to provide caller with an optional capability to specify reason. Currently this event is used by user space governor to trigger different processing based on event code. Also it saves an additional call to read temperature when the event is received. The following events are cuurently defined: - Unspecified event - New temperature sample - Trip point violated - Trip point changed - thermal device up and down - thermal device power capability changed Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-09-12Merge branch 'next' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - use int instead of unsigned long to represent temperature to avoid bogus overheat detection when negative temperature reported. From Sascha Hauer. - export available thermal governors information to user space via sysfs. From Wei Ni. - introduce new thermal driver for Wildcat Point platform controller hub, which uses PCH thermal sensor and associated critical and hot trip points. From Tushar Dave. - add suuport for Intel Skylake and Denlow platforms in powerclamp driver. - some small cleanups in thermal core. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: Add Intel PCH thermal driver thermal: Add comment explaining test for critical temperature thermal: Use IS_ENABLED instead of #ifdef thermal: remove unnecessary call to thermal_zone_device_set_polling thermal: trivial: fix typo in comment thermal: consistently use int for temperatures thermal: add available policies sysfs attribute thermal/powerclamp: add cpu id for denlow platform thermal/powerclamp: add cpu id for Skylake u/y thermal/powerclamp: add cpu id for skylake h/s
2015-08-07thermal: sti: Add parentheses around bridge->ops->regmap_init callNicolas Boichat1-1/+1
regmap_init(...) is a macro since commit "regmap: Use different lockdep class for each regmap init call". That same name is used as a function pointer: prevent its expansion by adding parentheses around the function pointer. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-03thermal: consistently use int for temperaturesSascha Hauer1-3/+2
The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-04-07drivers: thermal: st: remove several sparse warningsEduardo Valentin3-11/+11
Simple patch to make symbols static. Symbols that are not shared with other parts of the kernel can be made static. This change also removes several sparse complains. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ajit Pal Singh <ajitpal.singh@st.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-04-07thermal: constify of_device_id arrayFabian Frederick2-2/+2
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-21thermal: sti: Ignore suspend/resume functions when !PM_SLEEPLee Jones1-0/+3
Prevents build warning: st_thermal.c:278:12: warning: ‘st_thermal_suspend’ defined but not used [-Wunused-function] st_thermal.c:286:12: warning: ‘st_thermal_resume’ defined but not used [-Wunused-function] Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-10-20thermal: st: drop owner assignment from platform_driversWolfram Sang2-2/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-15thermal: sti: Add support for ST's Memory Mapped based Thermal controllerLee Jones3-0/+214
This is the traditional way of obtaining a device driver's register address space. The aim of this driver is to supply controller specific information to the ST Thermal Core. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-15thermal: sti: Add support for ST's System Config Register based Thermal ↵Lee Jones3-0/+184
controller Supply controller specific information to the ST Thermal Core. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-15thermal: sti: Introduce ST Thermal core codeLee Jones4-0/+422
This core is shared by both ST's 'memory mapped' and 'system configuration register' based Thermal controllers. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Zhang Rui <rui.zhang@intel.com>