summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
2018-01-29Merge branch 'for-4.16/block' of git://git.kernel.dk/linux-blockLinus Torvalds2-42/+5
Pull block updates from Jens Axboe: "This is the main pull request for block IO related changes for the 4.16 kernel. Nothing major in this pull request, but a good amount of improvements and fixes all over the map. This contains: - BFQ improvements, fixes, and cleanups from Angelo, Chiara, and Paolo. - Support for SMR zones for deadline and mq-deadline from Damien and Christoph. - Set of fixes for bcache by way of Michael Lyle, including fixes from himself, Kent, Rui, Tang, and Coly. - Series from Matias for lightnvm with fixes from Hans Holmberg, Javier, and Matias. Mostly centered around pblk, and the removing rrpc 1.2 in preparation for supporting 2.0. - A couple of NVMe pull requests from Christoph. Nothing major in here, just fixes and cleanups, and support for command tracing from Johannes. - Support for blk-throttle for tracking reads and writes separately. From Joseph Qi. A few cleanups/fixes also for blk-throttle from Weiping. - Series from Mike Snitzer that enables dm to register its queue more logically, something that's alwways been problematic on dm since it's a stacked device. - Series from Ming cleaning up some of the bio accessor use, in preparation for supporting multipage bvecs. - Various fixes from Ming closing up holes around queue mapping and quiescing. - BSD partition fix from Richard Narron, fixing a problem where we can't mount newer (10/11) FreeBSD partitions. - Series from Tejun reworking blk-mq timeout handling. The previous scheme relied on atomic bits, but it had races where we would think a request had timed out if it to reused at the wrong time. - null_blk now supports faking timeouts, to enable us to better exercise and test that functionality separately. From me. - Kill the separate atomic poll bit in the request struct. After this, we don't use the atomic bits on blk-mq anymore at all. From me. - sgl_alloc/free helpers from Bart. - Heavily contended tag case scalability improvement from me. - Various little fixes and cleanups from Arnd, Bart, Corentin, Douglas, Eryu, Goldwyn, and myself" * 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits) block: remove smart1,2.h nvme: add tracepoint for nvme_complete_rq nvme: add tracepoint for nvme_setup_cmd nvme-pci: introduce RECONNECTING state to mark initializing procedure nvme-rdma: remove redundant boolean for inline_data nvme: don't free uuid pointer before printing it nvme-pci: Suspend queues after deleting them bsg: use pr_debug instead of hand crafted macros blk-mq-debugfs: don't allow write on attributes with seq_operations set nvme-pci: Fix queue double allocations block: Set BIO_TRACE_COMPLETION on new bio during split blk-throttle: use queue_is_rq_based block: Remove kblockd_schedule_delayed_work{,_on}() blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly() lib/scatterlist: Fix chaining support in sgl_alloc_order() blk-throttle: track read and write request individually block: add bdev_read_only() checks to common helpers block: fail op_is_write() requests to read-only partitions blk-throttle: export io_serviced_recursive, io_service_bytes_recursive ...
2018-01-19lib/scatterlist: Fix chaining support in sgl_alloc_order()Bart Van Assche1-1/+1
This patch avoids that workloads with large block sizes (megabytes) can trigger the following call stack with the ib_srpt driver (that driver is the only driver that chains scatterlists allocated by sgl_alloc_order()): BUG: Bad page state in process kworker/0:1H pfn:2423a78 page:fffffb03d08e9e00 count:-3 mapcount:0 mapping: (null) index:0x0 flags: 0x57ffffc0000000() raw: 0057ffffc0000000 0000000000000000 0000000000000000 fffffffdffffffff raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000 page dumped because: nonzero _count CPU: 0 PID: 733 Comm: kworker/0:1H Tainted: G I 4.15.0-rc7.bart+ #1 Hardware name: HP ProLiant DL380 G7, BIOS P67 08/16/2015 Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] Call Trace: dump_stack+0x5c/0x83 bad_page+0xf5/0x10f get_page_from_freelist+0xa46/0x11b0 __alloc_pages_nodemask+0x103/0x290 sgl_alloc_order+0x101/0x180 target_alloc_sgl+0x2c/0x40 [target_core_mod] srpt_alloc_rw_ctxs+0x173/0x2d0 [ib_srpt] srpt_handle_new_iu+0x61e/0x7f0 [ib_srpt] __ib_process_cq+0x55/0xa0 [ib_core] ib_cq_poll_work+0x1b/0x60 [ib_core] process_one_work+0x141/0x340 worker_thread+0x47/0x3e0 kthread+0xf5/0x130 ret_from_fork+0x1f/0x30 Fixes: e80a0af4759a ("lib/scatterlist: Introduce sgl_alloc() and sgl_free()") Reported-by: Laurence Oberman <loberman@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06target: Use sgl_alloc_order() and sgl_free()Bart Van Assche2-42/+5
Use the sgl_alloc_order() and sgl_free() functions instead of open coding these functions. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-18block: fix blk_rq_append_bioJens Axboe1-2/+2
Commit caa4b02476e3(blk-map: call blk_queue_bounce from blk_rq_append_bio) moves blk_queue_bounce() into blk_rq_append_bio(), but don't consider the fact that the bounced bio becomes invisible to caller since the parameter type is 'struct bio *'. Make it a pointer to a pointer to a bio, so the caller sees the right bio also after a bounce. Fixes: caa4b02476e3 ("blk-map: call blk_queue_bounce from blk_rq_append_bio") Cc: Christoph Hellwig <hch@lst.de> Reported-by: Michele Ballabio <barra_cuda@katamail.com> (handling failure of blk_rq_append_bio(), only call bio_get() after blk_rq_append_bio() returns OK) Tested-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: - The final conversion of timer wheel timers to timer_setup(). A few manual conversions and a large coccinelle assisted sweep and the removal of the old initialization mechanisms and the related code. - Remove the now unused VSYSCALL update code - Fix permissions of /proc/timer_list. I still need to get rid of that file completely - Rename a misnomed clocksource function and remove a stale declaration * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) m68k/macboing: Fix missed timer callback assignment treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts timer: Remove redundant __setup_timer*() macros timer: Pass function down to initialization routines timer: Remove unused data arguments from macros timer: Switch callback prototype to take struct timer_list * argument timer: Pass timer_list pointer to callbacks unconditionally Coccinelle: Remove setup_timer.cocci timer: Remove setup_*timer() interface timer: Remove init_timer() interface treewide: setup_timer() -> timer_setup() (2 field) treewide: setup_timer() -> timer_setup() treewide: init_timer() -> setup_timer() treewide: Switch DEFINE_TIMER callbacks to struct timer_list * s390: cmm: Convert timers to use timer_setup() lightnvm: Convert timers to use timer_setup() drivers/net: cris: Convert timers to use timer_setup() drm/vc4: Convert timers to use timer_setup() block/laptop_mode: Convert timers to use timer_setup() net/atm/mpc: Avoid open-coded assignment of timer callback function ...
2017-11-25Merge branch 'for-next' of ↵Linus Torvalds21-239/+385
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This series is predominantly bug-fixes, with a few small improvements that have been outstanding over the last release cycle. As usual, the associated bug-fixes have CC' tags for stable. Also, things have been particularly quiet wrt new developments the last months, with most folks continuing to focus on stability atop 4.x stable kernels for their respective production configurations. Also at this point, the stable trees have been synced up with mainline. This will continue to be a priority, as production users tend to run exclusively atop stable kernels, a few releases behind mainline. The highlights include: - Fix PR PREEMPT_AND_ABORT null pointer dereference regression in v4.11+ (tangwenji) - Fix OOPs during removing TCMU device (Xiubo Li + Zhang Zhuoyu) - Add netlink command reply supported option for each device (Kenjiro Nakayama) - cxgbit: Abort the TCP connection in case of data out timeout (Varun Prakash) - Fix PR/ALUA file path truncation (David Disseldorp) - Fix double se_cmd completion during ->cmd_time_out (Mike Christie) - Fix QUEUE_FULL + SCSI task attribute handling in 4.1+ (Bryant Ly + nab) - Fix quiese during transport_write_pending_qf endless loop (nab) - Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK in 3.14+ (Don White + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (35 commits) tcmu: Add a missing unlock on an error path tcmu: Fix some memory corruption iscsi-target: Fix non-immediate TMR reference leak iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK target: Fix quiese during transport_write_pending_qf endless loop target: Fix caw_sem leak in transport_generic_request_failure target: Fix QUEUE_FULL + SCSI task attribute handling iSCSI-target: Use common error handling code in iscsi_decode_text_input() target/iscsi: Detect conn_cmd_list corruption early target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd() target/iscsi: Modify iscsit_do_crypto_hash_buf() prototype target/iscsi: Fix endianness in an error message target/iscsi: Use min() in iscsit_dump_data_payload() instead of open-coding it target/iscsi: Define OFFLOAD_BUF_SIZE once target: Inline transport_put_cmd() target: Suppress gcc 7 fallthrough warnings target: Move a declaration of a global variable into a header file tcmu: fix double se_cmd completion target: return SAM_STAT_TASK_SET_FULL for TCM_OUT_OF_RESOURCES ...
2017-11-22treewide: setup_timer() -> timer_setup()Kees Cook1-4/+3
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-15Merge tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfsLinus Torvalds3-21/+21
Pull configfs updates from Christoph Hellwig: "A couple of configfs cleanups: - proper use of the bool type (Thomas Meyer) - constification of struct config_item_type (Bhumika Goyal)" * tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs: RDMA/cma: make config_item_type const stm class: make config_item_type const ACPI: configfs: make config_item_type const nvmet: make config_item_type const usb: gadget: configfs: make config_item_type const PCI: endpoint: make config_item_type const iio: make function argument and some structures const usb: gadget: make config_item_type structures const dlm: make config_item_type const netconsole: make config_item_type const nullb: make config_item_type const ocfs2/cluster: make config_item_type const target: make config_item_type const configfs: make ci_type field, some pointers and function arguments const configfs: make config_item_type const configfs: Fix bool initialization/comparison
2017-11-14Merge branch 'timers-core-for-linus' of ↵Linus Torvalds10-52/+48
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-08tcmu: Add a missing unlock on an error pathDan Carpenter1-0/+1
We added a new error path here but we forgot to drop the lock first before returning. Fixes: 0d44374c1aae ("tcmu: fix double se_cmd completion") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-08tcmu: Fix some memory corruptionDan Carpenter1-3/+2
"udev->nl_reply_supported" is an int but on 64 bit arches we are writing 8 bytes of data to it so it corrupts four bytes beyond the end of the struct. Fixes: b849b4567549 ("target: Add netlink command reply supported option for each device") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-08iscsi-target: Fix non-immediate TMR reference leakNicholas Bellinger1-3/+5
This patch fixes a se_cmd->cmd_kref reference leak that can occur when a non immediate TMR is proceeded our of command sequence number order, and CMDSN_LOWER_THAN_EXP is returned by iscsit_sequence_cmd(). To address this bug, call target_put_sess_cmd() during this special case following what iscsit_process_scsi_cmd() does upon CMDSN_LOWER_THAN_EXP. Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-08iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_krefNicholas Bellinger1-13/+9
Since commit 59b6986dbf fixed a potential NULL pointer dereference by allocating a se_tmr_req for ISCSI_TM_FUNC_TASK_REASSIGN, the se_tmr_req is currently leaked by iscsit_free_cmd() because no iscsi_cmd->se_cmd.se_tfo was associated. To address this, treat ISCSI_TM_FUNC_TASK_REASSIGN like any other TMR and call transport_init_se_cmd() + target_get_sess_cmd() to setup iscsi_cmd->se_cmd.se_tfo with se_cmd->cmd_kref of 2. This will ensure normal release operation once se_cmd->cmd_kref reaches zero and target_release_cmd_kref() is invoked, se_tmr_req will be released via existing target_free_cmd_mem() and core_tmr_release_req() code. Reported-by: Donald White <dew@datera.io> Cc: Donald White <dew@datera.io> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-08target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASKNicholas Bellinger2-0/+11
This patch fixes bug where early se_cmd exceptions that occur before backend execution can result in use-after-free if/when a subsequent ABORT_TASK occurs for the same tag. Since an early se_cmd exception will have had se_cmd added to se_session->sess_cmd_list via target_get_sess_cmd(), it will not have CMD_T_COMPLETE set by the usual target_complete_cmd() backend completion path. This causes a subsequent ABORT_TASK + __target_check_io_state() to signal ABORT_TASK should proceed. As core_tmr_abort_task() executes, it will bring the outstanding se_cmd->cmd_kref count down to zero releasing se_cmd, after se_cmd has already been queued with error status into fabric driver response path code. To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is set at target_get_sess_cmd() time, and cleared immediately before backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE is set. Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to determine when an early exception has occured, and avoid aborting this se_cmd since it will have already been queued into fabric driver response path code. Reported-by: Donald White <dew@datera.io> Cc: Donald White <dew@datera.io> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-08target: Fix quiese during transport_write_pending_qf endless loopNicholas Bellinger1-0/+13
This patch fixes a potential end-less loop during QUEUE_FULL, where cmd->se_tfo->write_pending() callback fails repeatedly but __transport_wait_for_tasks() has already been invoked to quiese the outstanding se_cmd descriptor. To address this bug, this patch adds a CMD_T_STOP|CMD_T_ABORTED check within transport_write_pending_qf() and invokes the existing se_cmd->t_transport_stop_comp to signal quiese completion back to __transport_wait_for_tasks(). Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com> Cc: Potnuri Bharat Teja <bharat@chelsio.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-08target: Fix caw_sem leak in transport_generic_request_failureNicholas Bellinger1-3/+4
With the recent addition of transport_check_aborted_status() within transport_generic_request_failure() to avoid sending a SCSI status exception after CMD_T_ABORTED w/ TAS=1 has occured, it introduced a COMPARE_AND_WRITE early failure regression. Namely when COMPARE_AND_WRITE fails and se_device->caw_sem has been taken by sbc_compare_and_write(), if the new check for transport_check_aborted_status() returns true and exits, cmd->transport_complete_callback() -> compare_and_write_post() is skipped never releasing se_device->caw_sem. This regression was originally introduced by: commit e3b88ee95b4e4bf3e9729a4695d695b9c7c296c8 Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Tue Feb 14 16:25:45 2017 -0800 target: Fix handling of aborted failed commands To address this bug, move the transport_check_aborted_status() call after transport_complete_task_attr() and cmd->transport_complete_callback(). Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-08target: Fix QUEUE_FULL + SCSI task attribute handlingNicholas Bellinger1-0/+4
This patch fixes a bug during QUEUE_FULL where transport_complete_qf() calls transport_complete_task_attr() after it's already been invoked by target_complete_ok_work() or transport_generic_request_failure() during initial completion, preceeding QUEUE_FULL. This will result in se_device->simple_cmds, se_device->dev_cur_ordered_id and/or se_device->dev_ordered_sync being updated multiple times for a single se_cmd. To address this bug, clear SCF_TASK_ATTR_SET after the first call to transport_complete_task_attr(), and avoid updating SCSI task attribute related counters for any subsequent calls. Also, when a se_cmd is deferred due to ordered tags and executed via target_restart_delayed_cmds(), set CMD_T_SENT before execution matching what target_execute_cmd() does. Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar31-0/+31
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-05iSCSI-target: Use common error handling code in iscsi_decode_text_input()Markus Elfring1-21/+18
Add a jump target so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target/iscsi: Detect conn_cmd_list corruption earlyBart Van Assche1-0/+4
Certain behavior of the initiator can cause the target driver to send both a reject and a SCSI response. If that happens two target_put_sess_cmd() calls will occur without the command having been removed from conn_cmd_list. In other words, conn_cmd_list will get corrupted once the freed memory is reused. Although the Linux kernel can detect list corruption if list debugging is enabled, in this case the context in which list corruption is detected is not related to the context that caused list corruption. Hence add WARN_ON() statements that report the context that is causing list corruption. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()Bart Van Assche1-1/+2
Avoid that cmd->se_cmd.se_tfo is read after a command has already been freed. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target/iscsi: Modify iscsit_do_crypto_hash_buf() prototypeBart Van Assche1-24/+17
Change the type of the last two arguments from u8 * into const void * and void * respectively such that the u8 * casts can be left out from the callers. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target/iscsi: Fix endianness in an error messageBart Van Assche1-3/+3
Since hdr->offset is a big endian number, convert it to CPU endian before printing it. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target/iscsi: Use min() in iscsit_dump_data_payload() instead of open-coding itBart Van Assche1-4/+3
This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target/iscsi: Define OFFLOAD_BUF_SIZE onceBart Van Assche1-2/+0
The constant OFFLOAD_BUF_SIZE is defined twice - once in iscsi_target_seq_pdu_list.c and once in iscsi_target_erl1.c. Since that constant is not used in the former source file, remove its definition from that source file. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: Inline transport_put_cmd()Bart Van Assche1-20/+3
Since all transput_put_cmd() does is to call target_put_sess_cmd(), inline transport_put_cmd() into its callers. Leave out the BUG_ON() statement because if cmd->se_tfo == NULL then cmd->cmd_kref is 0 and kref_put() will complain anyway. Notes: - transport_init_se_cmd() initializes both .se_tfo and .cmd_kref. - The only target driver that does not call transport_init_se_cmd() for all commands is the iSCSI target driver. See also iscsi_target_rx_opcode(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: Suppress gcc 7 fallthrough warningsBart Van Assche3-2/+5
Avoid that gcc 7 reports the following warning when building with W=1: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Cc: Varun Prakash <varun@chelsio.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: Move a declaration of a global variable into a header fileBart Van Assche2-2/+1
This patch avoids that sparse reports the following warning: drivers/target/target_core_configfs.c:2267:33: warning: symbol 'target_core_dev_item_ops' was not declared. Should it be static? Fixes: c17cd24959cd ("target/configfs: Kill se_device->dev_link_magic") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05tcmu: fix double se_cmd completionMike Christie1-23/+31
If cmd_time_out != 0, then tcmu_queue_cmd_ring could end up sleeping waiting for ring space, timing out and then returning failure to lio, and tcmu_check_expired_cmd could also detect the timeout and call target_complete_cmd on the cmd. This patch just delays setting up the deadline value and adding the cmd to the udev->commands idr until we have allocated ring space and are about to send the cmd to userspace. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: return SAM_STAT_TASK_SET_FULL for TCM_OUT_OF_RESOURCESMike Christie1-7/+9
TCM_OUT_OF_RESOURCES is getting translated to TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE which seems like a heavy error when we just cannot allocate a resource that may be allocatable later. This has us translate TCM_OUT_OF_RESOURCES to SAM_STAT_TASK_SET_FULL instead. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: fix ALUA state file path truncationDavid Disseldorp2-32/+28
A sufficiently long Unit Serial string, dbroot path, and/or ALUA target portal group name may result in truncation of the ALUA state file path prior to usage. Fix this by using kasprintf() instead. Fixes: fdddf932269a ("target: use new "dbroot" target attribute") Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: fix PR state file path truncationDavid Disseldorp1-9/+7
If an LIO backstore is configured with a sufficiently long Unit Serial string, alongside a similarly long dbroot path, then a truncated Persistent Reservation APTPL state file path will be used. This truncation can unintentionally lead to two LUs with differing serial numbers sharing PR state file. Fixes: fdddf932269a ("target: use new "dbroot" target attribute") Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05cxgbit: Abort the TCP connection in case of data out timeoutVarun Prakash3-0/+55
If DDP is programmed for a WRITE cmd and data out timer gets expired then abort the TCP connection before freeing the cmd to avoid any possibility of DDP after freeing the cmd. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: Add netlink command reply supported option for each deviceKenjiro Nakayama1-1/+58
Currently netlink command reply support option (TCMU_ATTR_SUPP_KERN_CMD_REPLY) can be enabled only on module scope. Because of that, once an application enables the netlink command reply support, all applications using target_core_user.ko would be expected to support the netlink reply. To make matters worse, users will not be able to add a device via configfs manually. To fix these issues, this patch adds an option to make netlink command reply disabled on each device through configfs. Original TCMU_ATTR_SUPP_KERN_CMD_REPLY is still enabled on module scope to keep backward-compatibility and used by default, however once users set nl_reply_supported=<NAGATIVE_VALUE> via configfs for a particular device, the device disables the netlink command reply support. Signed-off-by: Kenjiro Nakayama <nakayamakenjiro@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target/tcmu: Use macro to call container_of in tcmu_cmd_time_out_showKenjiro Nakayama1-2/+1
This patch makes a tiny change that using TCMU_DEV in tcmu_cmd_time_out_show so it is consistent with other functions. Signed-off-by: Kenjiro Nakayama <nakayamakenjiro@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05tcmu: fix crash when removing the tcmu deviceXiubo Li1-45/+47
Before the nl REMOVE msg has been sent to the userspace, the ring's and other resources have been released, but the userspace maybe still using them. And then we can see the crash messages like: ring broken, not handling completions BUG: unable to handle kernel paging request at ffffffffffffffd0 IP: tcmu_handle_completions+0x134/0x2f0 [target_core_user] PGD 11bdc0c067 P4D 11bdc0c067 PUD 11bdc0e067 PMD 0 Oops: 0000 [#1] SMP cmd_id not found, ring is broken RIP: 0010:tcmu_handle_completions+0x134/0x2f0 [target_core_user] RSP: 0018:ffffb8a2d8983d88 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffb8a2aaa4e000 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000220 R10: 0000000076c71401 R11: ffff8d2e76c713f0 R12: ffffb8a2aad56bc0 R13: 000000000000001c R14: ffff8d2e32c90000 R15: ffff8d2e76c713f0 FS: 00007f411ffff700(0000) GS:ffff8d1e7fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd0 CR3: 0000001027070000 CR4: 00000000001406e0 Call Trace: ? tcmu_irqcontrol+0x2a/0x40 [target_core_user] ? uio_write+0x7b/0xc0 [uio] ? __vfs_write+0x37/0x150 ? __getnstimeofday64+0x3b/0xd0 ? vfs_write+0xb2/0x1b0 ? syscall_trace_enter+0x1d0/0x2b0 ? SyS_write+0x55/0xc0 ? do_syscall_64+0x67/0x150 ? entry_SYSCALL64_slow_path+0x25/0x25 Code: 41 5d 41 5e 41 5f 5d c3 83 f8 01 0f 85 cf 01 00 00 48 8b 7d d0 e8 dd 5c 1d f3 41 0f b7 74 24 04 48 8b 7d c8 31 d2 e8 5c c7 1b f3 <48> 8b 7d d0 49 89 c7 c6 07 00 0f 1f 40 00 4d 85 ff 0f 84 82 01 RIP: tcmu_handle_completions+0x134/0x2f0 [target_core_user] RSP: ffffb8a2d8983d88 CR2: ffffffffffffffd0 And the crash also could happen in tcmu_page_fault and other places. Signed-off-by: Zhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05iscsi-target: fix memory leak in iscsit_release_discovery_tpg()tangwenji1-2/+5
Need to release the param_list for tpg in iscsi_release_discovery_tpg function, this is also required before the iscsit_load_discovery_tpg function exits abnormally. Signed-off-by: tangwenji <tang.wenji@zte.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05iscsi-target: fix memory leak in lio_target_tiqn_addtpg()tangwenji1-1/+2
tpg must free when call core_tpg_register() return fail Signed-off-by: tangwenji <tang.wenji@zte.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target:fix condition return in core_pr_dump_initiator_port()tangwenji1-1/+3
When is pr_reg->isid_present_at_reg is false,this function should return. This fixes a regression originally introduced by: commit d2843c173ee53cf4c12e7dfedc069a5bc76f0ac5 Author: Andy Grover <agrover@redhat.com> Date: Thu May 16 10:40:55 2013 -0700 target: Alter core_pr_dump_initiator_port for ease of use Signed-off-by: tangwenji <tang.wenji@zte.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: fix match_token option in target_core_configfs.ctangwenji1-7/+7
The match_token function does not recognize the option 'l', so that both the mapped_lun and target_lun parameters can not be resolved correctly. And parsed u64-type parameters should use match_u64(). (Use %u instead of %s for Opt_mapped_lun + Opt_target_lun - nab) Signed-off-by: tangwenji <tang.wenji@zte.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: add sense code INSUFFICIENT REGISTRATION RESOURCEStangwenji2-8/+23
If a PERSISTENT RESERVE OUT command with a REGISTER service action or a REGISTER AND IGNORE EXISTING KEY service action or REGISTER AND MOVE service action is attempted, but there are insufficient device server resources to complete the operation, then the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST,and the additonal sense code set to INSUFFICIENT REGISTRATION RESOURCES. Signed-off-by: tangwenji <tang.wenji@zte.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: fix double unmap data sg in core_scsi3_emulate_pro_register_and_move()tangwenji1-2/+0
Signed-off-by: tangwenji <tang.wenji@zte.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: fix buffer offset in core_scsi3_pri_read_full_statustangwenji1-0/+1
When at least two initiators register pr on the same LUN, the target returns the exception data due to buffer offset error, therefore the initiator executes command 'sg_persist -s' may cause the initiator to appear segfault error. This fixes a regression originally introduced by: commit a85d667e58bddf73be84d1981b41eaac985ed216 Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Tue May 23 16:48:27 2017 -0700 target: Use {get,put}_unaligned_be*() instead of open coding these functions Signed-off-by: tangwenji <tang.wenji@zte.com.cn> Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target: fix null pointer regression in core_tmr_drain_tmr_listtangwenji1-1/+2
The target system kernel crash when the initiator executes the sg_persist -A command,because of the second argument to be set to NULL when core_tmr_lun_reset is called in core_scsi3_pro_preempt function. This fixes a regression originally introduced by: commit 51ec502a32665fed66c7f03799ede4023b212536 Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Tue Feb 14 16:25:54 2017 -0800 target: Delete tmr from list before processing Signed-off-by: tangwenji <tang.wenji@zte.com.cn> Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-05target/file: Do not return error for UNMAP if length is zeroJiang Yi1-0/+4
The function fd_execute_unmap() in target_core_file.c calles ret = file->f_op->fallocate(file, mode, pos, len); Some filesystems implement fallocate() to return error if length is zero (e.g. btrfs) but according to SCSI Block Commands spec UNMAP should return success for zero length. Signed-off-by: Jiang Yi <jiangyilism@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman31-0/+31
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01target/iscsi: Convert timers to use timer_setup()Kees Cook10-33/+37
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Includes a fix for correcting an on-stack timer usage. Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Jiang Yi <jiangyilism@gmail.com> Cc: Varun Prakash <varun@chelsio.com> Cc: linux-scsi@vger.kernel.org Cc: target-devel@vger.kernel.org Reviewed-and-Tested-by: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-01target/iscsi: Simplify timer manipulation codeBart Van Assche10-42/+34
Move timer initialization from before add_timer() to the context where the containing object is initialized. Use setup_timer() and mod_timer() instead of open coding these. Use 'jiffies' instead of get_jiffies_64() when calculating expiry times because expiry times have type unsigned long, just like 'jiffies'. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland1-1/+1
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-19target: make config_item_type constBhumika Goyal3-21/+21
Make these structures const as they are either passed to the functions having the argument as const or stored as a reference in the "ci_type" const field of a config_item structure. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 19:49:35 +0300