summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
2020-10-29scsi: target: tcmu: Fix warning: 'page' may be used uninitializedJohn Donnelly1-1/+1
[ Upstream commit 61741d8699e1fc764a309ebd20211bb1cb193110 ] Corrects drivers/target/target_core_user.c:688:6: warning: 'page' may be used uninitialized. Link: https://lore.kernel.org/r/20200924001920.43594-1-john.p.donnelly@oracle.com Fixes: 3c58f737231e ("scsi: target: tcmu: Optimize use of flush_dcache_page") Cc: Mike Christie <michael.christie@oracle.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17scsi: target: iscsi: Fix hang in iscsit_access_np() when getting ↵Hou Pu3-7/+5
tpg->np_login_sem commit ed43ffea78dcc97db3f561da834f1a49c8961e33 upstream. The iSCSI target login thread might get stuck with the following stack: cat /proc/`pidof iscsi_np`/stack [<0>] down_interruptible+0x42/0x50 [<0>] iscsit_access_np+0xe3/0x167 [<0>] iscsi_target_locate_portal+0x695/0x8ac [<0>] __iscsi_target_login_thread+0x855/0xb82 [<0>] iscsi_target_login_thread+0x2f/0x5a [<0>] kthread+0xfa/0x130 [<0>] ret_from_fork+0x1f/0x30 This can be reproduced via the following steps: 1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing PDU exchange in the login thread and before the negotiation is finished the the network link goes down. At this point A has not finished login and tpg->np_login_sem is held. 2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing PDU exchange in the login thread the target expects to process remaining login PDUs in workqueue context. 3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new socket. A' will wait for tpg->np_login_sem with np->np_login_timer loaded to wait for at most 15 seconds. The lock is held by A so A' eventually times out. 4. Before A' got timeout initiator B gets negotiation failed and calls iscsi_target_login_drop()->iscsi_target_login_sess_out(). The np->np_login_timer is canceled and initiator A' will hang forever. Because A' is now in the login thread, no new login requests can be serviced. Fix this by moving iscsi_stop_login_thread_timer() out of iscsi_target_login_sess_out(). Also remove iscsi_np parameter from iscsi_target_login_sess_out(). Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com Cc: stable@vger.kernel.org Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17scsi: target: iscsi: Fix data digest calculationVarun Prakash1-2/+15
commit 5528d03183fe5243416c706f64b1faa518b05130 upstream. Current code does not consider 'page_off' in data digest calculation. To fix this, add a local variable 'first_sg' and set first_sg.offset to sg->offset + page_off. Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Christie <michael.christie@oralce.com> Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09scsi: target: tcmu: Optimize use of flush_dcache_pageBodo Stroesser1-4/+7
commit 3c58f737231e2c8cbf543a09d84d8c8e80e05e43 upstream. (scatter|gather)_data_area() need to flush dcache after writing data to or before reading data from a page in uio data area. The two routines are able to handle data transfer to/from such a page in fragments and flush the cache after each fragment was copied by calling the wrapper tcmu_flush_dcache_range(). That means: 1) flush_dcache_page() can be called multiple times for the same page. 2) Calling flush_dcache_page() indirectly using the wrapper does not make sense, because each call of the wrapper is for one single page only and the calling routine already has the correct page pointer. Change (scatter|gather)_data_area() such that, instead of calling tcmu_flush_dcache_range() before/after each memcpy, it now calls flush_dcache_page() before unmapping a page (when writing is complete for that page) or after mapping a page (when starting to read the page). After this change only calls to tcmu_flush_dcache_range() for addresses in vmalloc'ed command ring are left over. The patch was tested on ARM with kernel 4.19.118 and 5.7.2 Link: https://lore.kernel.org/r/20200618131632.32748-2-bstroesser@ts.fujitsu.com Tested-by: JiangYu <lnsyyj@hotmail.com> Tested-by: Daniel Meyerholt <dxm523@gmail.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09scsi: target: tcmu: Fix size in calls to tcmu_flush_dcache_rangeBodo Stroesser1-2/+2
commit 8c4e0f212398cdd1eb4310a5981d06a723cdd24f upstream. 1) If remaining ring space before the end of the ring is smaller then the next cmd to write, tcmu writes a padding entry which fills the remaining space at the end of the ring. Then tcmu calls tcmu_flush_dcache_range() with the size of struct tcmu_cmd_entry as data length to flush. If the space filled by the padding was smaller then tcmu_cmd_entry, tcmu_flush_dcache_range() is called for an address range reaching behind the end of the vmalloc'ed ring. tcmu_flush_dcache_range() in a loop calls flush_dcache_page(virt_to_page(start)); for every page being part of the range. On x86 the line is optimized out by the compiler, as flush_dcache_page() is empty on x86. But I assume the above can cause trouble on other architectures that really have a flush_dcache_page(). For paddings only the header part of an entry is relevant due to alignment rules the header always fits in the remaining space, if padding is needed. So tcmu_flush_dcache_range() can safely be called with sizeof(entry->hdr) as the length here. 2) After it has written a command to cmd ring, tcmu calls tcmu_flush_dcache_range() using the size of a struct tcmu_cmd_entry as data length to flush. But if a command needs many iovecs, the real size of the command may be bigger then tcmu_cmd_entry, so a part of the written command is not flushed then. Link: https://lore.kernel.org/r/20200528193108.9085-1-bstroesser@ts.fujitsu.com Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03scsi: target: tcmu: Fix crash on ARM during cmd completionBodo Stroesser1-1/+8
[ Upstream commit 5a0c256d96f020e4771f6fd5524b80f89a2d3132 ] If tcmu_handle_completions() has to process a padding shorter than sizeof(struct tcmu_cmd_entry), the current call to tcmu_flush_dcache_range() with sizeof(struct tcmu_cmd_entry) as length param is wrong and causes crashes on e.g. ARM, because tcmu_flush_dcache_range() in this case calls flush_dcache_page(vmalloc_to_page(start)); with start being an invalid address above the end of the vmalloc'ed area. The fix is to use the minimum of remaining ring space and sizeof(struct tcmu_cmd_entry) as the length param. The patch was tested on kernel 4.19.118. See https://bugzilla.kernel.org/show_bug.cgi?id=208045#c10 Link: https://lore.kernel.org/r/20200629093756.8947-1-bstroesser@ts.fujitsu.com Tested-by: JiangYu <lnsyyj@hotmail.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26scsi: target: tcmu: Fix crash in tcmu_flush_dcache_range on ARMBodo Stroesser1-1/+1
[ Upstream commit 3145550a7f8b08356c8ff29feaa6c56aca12901d ] This patch fixes the following crash (see https://bugzilla.kernel.org/show_bug.cgi?id=208045) Process iscsi_trx (pid: 7496, stack limit = 0x0000000010dd111a) CPU: 0 PID: 7496 Comm: iscsi_trx Not tainted 4.19.118-0419118-generic #202004230533 Hardware name: Greatwall QingTian DF720/F601, BIOS 601FBE20 Sep 26 2019 pstate: 80400005 (Nzcv daif +PAN -UAO) pc : flush_dcache_page+0x18/0x40 lr : is_ring_space_avail+0x68/0x2f8 [target_core_user] sp : ffff000015123a80 x29: ffff000015123a80 x28: 0000000000000000 x27: 0000000000001000 x26: ffff000023ea5000 x25: ffffcfa25bbe08b8 x24: 0000000000000078 x23: ffff7e0000000000 x22: ffff000023ea5001 x21: ffffcfa24b79c000 x20: 0000000000000fff x19: ffff7e00008fa940 x18: 0000000000000000 x17: 0000000000000000 x16: ffff2d047e709138 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: ffff2d047fbd0a40 x11: 0000000000000000 x10: 0000000000000030 x9 : 0000000000000000 x8 : ffffc9a254820a00 x7 : 00000000000013b0 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffcfa25bbe08e8 x3 : 0000000000001000 x2 : 0000000000000078 x1 : ffffcfa25bbe08b8 x0 : ffff2d040bc88a18 Call trace: flush_dcache_page+0x18/0x40 is_ring_space_avail+0x68/0x2f8 [target_core_user] queue_cmd_ring+0x1f8/0x680 [target_core_user] tcmu_queue_cmd+0xe4/0x158 [target_core_user] __target_execute_cmd+0x30/0xf0 [target_core_mod] target_execute_cmd+0x294/0x390 [target_core_mod] transport_generic_new_cmd+0x1e8/0x358 [target_core_mod] transport_handle_cdb_direct+0x50/0xb0 [target_core_mod] iscsit_execute_cmd+0x2b4/0x350 [iscsi_target_mod] iscsit_sequence_cmd+0xd8/0x1d8 [iscsi_target_mod] iscsit_process_scsi_cmd+0xac/0xf8 [iscsi_target_mod] iscsit_get_rx_pdu+0x404/0xd00 [iscsi_target_mod] iscsi_target_rx_thread+0xb8/0x130 [iscsi_target_mod] kthread+0x130/0x138 ret_from_fork+0x10/0x18 Code: f9000bf3 aa0003f3 aa1e03e0 d503201f (f9400260) ---[ end trace 1e451c73f4266776 ]--- The solution is based on patch: "scsi: target: tcmu: Optimize use of flush_dcache_page" which restricts the use of tcmu_flush_dcache_range() to addresses from vmalloc'ed areas only. This patch now replaces the virt_to_page() call in tcmu_flush_dcache_range() - which is wrong for vmalloced addrs - by vmalloc_to_page(). The patch was tested on ARM with kernel 4.19.118 and 5.7.2 Link: https://lore.kernel.org/r/20200618131632.32748-3-bstroesser@ts.fujitsu.com Tested-by: JiangYu <lnsyyj@hotmail.com> Tested-by: Daniel Meyerholt <dxm523@gmail.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-25scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()Dan Carpenter1-3/+3
[ Upstream commit 9d7464b18892332e35ff37f0b024429a1a9835e6 ] The pr_debug() dereferences "cmd" after we already freed it by calling tcmu_free_cmd(cmd). The debug printk needs to be done earlier. Link: https://lore.kernel.org/r/20200523101129.GB98132@mwanda Fixes: 61fb24822166 ("scsi: target: tcmu: Userspace must not complete queued commands") Reviewed-by: Mike Christie <mchristi@redhat.com> Reviewed-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-25scsi: target: tcmu: Userspace must not complete queued commandsBodo Stroesser1-83/+71
[ Upstream commit 61fb2482216679b9e1e797440c148bb143a5040a ] When tcmu queues a new command - no matter whether in command ring or in qfull_queue - a cmd_id from IDR udev->commands is assigned to the command. If userspace sends a wrong command completion containing the cmd_id of a command on the qfull_queue, tcmu_handle_completions() finds the command in the IDR and calls tcmu_handle_completion() for it. This might do some nasty things because commands in qfull_queue do not have a valid dbi list. To fix this bug, we no longer add queued commands to the idr. Instead the cmd_id is assign when a command is written to the command ring. Due to this change I had to adapt the source code at several places where up to now an idr_for_each had been done. [mkp: fix checkpatch warnings] Link: https://lore.kernel.org/r/20200518164833.12775-1-bstroesser@ts.fujitsu.com Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-06scsi: target/iblock: fix WRITE SAME zeroingDavid Disseldorp1-1/+1
commit 1d2ff149b263c9325875726a7804a0c75ef7112e upstream. SBC4 specifies that WRITE SAME requests with the UNMAP bit set to zero "shall perform the specified write operation to each LBA specified by the command". Commit 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") modified the iblock backend to call blkdev_issue_zeroout() when handling WRITE SAME requests with UNMAP=0 and a zero data segment. The iblock blkdev_issue_zeroout() call incorrectly provides a flags parameter of 0 (bool false), instead of BLKDEV_ZERO_NOUNMAP. The bool false parameter reflects the blkdev_issue_zeroout() API prior to commit ee472d835c26 ("block: add a flags argument to (__)blkdev_issue_zeroout") which was merged shortly before 2237498f0b5c. Link: https://lore.kernel.org/r/20200419163109.11689-1-ddiss@suse.de Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02scsi: target: tcmu: reset_ring should reset TCMU_DEV_BIT_BROKENBodo Stroesser1-0/+1
[ Upstream commit 066f79a5fd6d1b9a5cc57b5cd445b3e4bb68a5b2 ] In case command ring buffer becomes inconsistent, tcmu sets device flag TCMU_DEV_BIT_BROKEN. If the bit is set, tcmu rejects new commands from LIO core with TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, and no longer processes completions from the ring. The reset_ring attribute can be used to completely clean up the command ring, so after reset_ring the ring no longer is inconsistent. Therefore reset_ring also should reset bit TCMU_DEV_BIT_BROKEN to allow normal processing. Link: https://lore.kernel.org/r/20200409101026.17872-1-bstroesser@ts.fujitsu.com Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-02scsi: target: fix PR IN / READ FULL STATUS for FCBodo Stroesser1-1/+1
[ Upstream commit 8fed04eb79a74cbf471dfaa755900a51b37273ab ] Creation of the response to READ FULL STATUS fails for FC based reservations. Reason is the too high loop limit (< 24) in fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is executed a last time for the ending '\0' of the string and thus hex2bin() reports an error. Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.com Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-21scsi: target: fix hang when multiple threads try to destroy the same iscsi ↵Maurizio Lombardi3-16/+29
session [ Upstream commit 57c46e9f33da530a2485fa01aa27b6d18c28c796 ] A number of hangs have been reported against the target driver; they are due to the fact that multiple threads may try to destroy the iscsi session at the same time. This may be reproduced for example when a "targetcli iscsi/iqn.../tpg1 disable" command is executed while a logout operation is underway. When this happens, two or more threads may end up sleeping and waiting for iscsit_close_connection() to execute "complete(session_wait_comp)". Only one of the threads will wake up and proceed to destroy the session structure, the remaining threads will hang forever. Note that if the blocked threads are somehow forced to wake up with complete_all(), they will try to free the same iscsi session structure destroyed by the first thread, causing double frees, memory corruptions etc... With this patch, the threads that want to destroy the iscsi session will increase the session refcount and will set the "session_close" flag to 1; then they wait for the driver to close the remaining active connections. When the last connection is closed, iscsit_close_connection() will wake up all the threads and will wait for the session's refcount to reach zero; when this happens, iscsit_close_connection() will destroy the session structure because no one is referencing it anymore. INFO: task targetcli:5971 blocked for more than 120 seconds. Tainted: P OE 4.15.0-72-generic #81~16.04.1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. targetcli D 0 5971 1 0x00000080 Call Trace: __schedule+0x3d6/0x8b0 ? vprintk_func+0x44/0xe0 schedule+0x36/0x80 schedule_timeout+0x1db/0x370 ? __dynamic_pr_debug+0x8a/0xb0 wait_for_completion+0xb4/0x140 ? wake_up_q+0x70/0x70 iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod] iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod] iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod] lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod] configfs_write_file+0xb9/0x120 __vfs_write+0x1b/0x40 vfs_write+0xb8/0x1b0 SyS_write+0x5c/0xe0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.com Reported-by: Matt Coleman <mcoleman@datto.com> Tested-by: Matt Coleman <mcoleman@datto.com> Tested-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-21scsi: target: remove boilerplate codeMaurizio Lombardi2-45/+2
[ Upstream commit e49a7d994379278d3353d7ffc7994672752fb0ad ] iscsit_free_session() is equivalent to iscsit_stop_session() followed by a call to iscsit_close_session(). Link: https://lore.kernel.org/r/20200313170656.9716-2-mlombard@redhat.com Tested-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28scsi: Revert "target: iscsi: Wait for all commands to finish before freeing ↵Bart Van Assche1-8/+2
a session" commit 807b9515b7d044cf77df31f1af9d842a76ecd5cb upstream. Since commit e9d3009cb936 introduced a regression and since the fix for that regression was not perfect, revert this commit. Link: https://marc.info/?l=target-devel&m=158157054906195 Cc: Rahul Kundu <rahul.kundu@chelsio.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Reported-by: Dakshaja Uppalapati <dakshaja@chelsio.com> Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28scsi: Revert "RDMA/isert: Fix a recently introduced regression related to ↵Bart Van Assche1-3/+3
logout" commit 76261ada16dcc3be610396a46d35acc3efbda682 upstream. Since commit 04060db41178 introduces soft lockups when toggling network interfaces, revert it. Link: https://marc.info/?l=target-devel&m=158157054906196 Cc: Rahul Kundu <rahul.kundu@chelsio.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Reported-by: Dakshaja Uppalapati <dakshaja@chelsio.com> Fixes: 04060db41178 ("scsi: RDMA/isert: Fix a recently introduced regression related to logout") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29scsi: RDMA/isert: Fix a recently introduced regression related to logoutBart Van Assche1-3/+3
commit 04060db41178c7c244f2c7dcd913e7fd331de915 upstream. iscsit_close_connection() calls isert_wait_conn(). Due to commit e9d3009cb936 both functions call target_wait_for_sess_cmds() although that last function should be called only once. Fix this by removing the target_wait_for_sess_cmds() call from isert_wait_conn() and by only calling isert_wait_conn() after target_wait_for_sess_cmds(). Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session"). Link: https://lore.kernel.org/r/20200116044737.19507-1-bvanassche@acm.org Reported-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-27scsi: target/core: Fix a race condition in the LUN lookup codeBart Van Assche1-2/+2
[ Upstream commit 63f7479439c95bcd49b7dd4af809862c316c71a3 ] The rcu_dereference(deve->se_lun) expression occurs twice in the LUN lookup functions. Since these expressions are not serialized against deve->se_lun assignments each of these expressions may yield a different result. Avoid that the wrong LUN pointer is stored in se_cmd by reading deve->se_lun only once. Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Fixes: 29a05deebf6c ("target: Convert se_node_acl->device_list[] to RCU hlist") # v4.10 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23scsi: target: core: Fix a pr_debug() argumentBart Van Assche1-1/+1
commit c941e0d172605731de9b4628bd4146d35cf2e7d6 upstream. Print the string for which conversion failed instead of printing the function name twice. Fixes: 2650d71e244f ("target: move transport ID handling to the core") Cc: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20191107215525.64415-1-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04scsi: target: iscsi: Wait for all commands to finish before freeing a sessionBart Van Assche1-2/+8
[ Upstream commit e9d3009cb936bd0faf0719f68d98ad8afb1e613b ] The iSCSI target driver is the only target driver that does not wait for ongoing commands to finish before freeing a session. Make the iSCSI target driver wait for ongoing commands to finish before freeing a session. This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710 Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247 CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: target_completion target_complete_ok_work [target_core_mod] Call Trace: dump_stack+0x8a/0xd6 print_address_description.constprop.0+0x40/0x60 __kasan_report.cold+0x1b/0x33 kasan_report+0x16/0x20 __asan_load8+0x58/0x90 __lock_acquire+0xb1a/0x2710 lock_acquire+0xd3/0x200 _raw_spin_lock_irqsave+0x43/0x60 target_release_cmd_kref+0x162/0x7f0 [target_core_mod] target_put_sess_cmd+0x2e/0x40 [target_core_mod] lio_check_stop_free+0x12/0x20 [iscsi_target_mod] transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod] target_complete_ok_work+0x1b0/0x790 [target_core_mod] process_one_work+0x549/0xa40 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Allocated by task 889: save_stack+0x23/0x90 __kasan_kmalloc.constprop.0+0xcf/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xf6/0x360 transport_alloc_session+0x29/0x80 [target_core_mod] iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Freed by task 1025: save_stack+0x23/0x90 __kasan_slab_free+0x13a/0x190 kasan_slab_free+0x12/0x20 kmem_cache_free+0x146/0x400 transport_free_session+0x179/0x2f0 [target_core_mod] transport_deregister_session+0x130/0x180 [target_core_mod] iscsit_close_session+0x12c/0x350 [iscsi_target_mod] iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod] iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod] iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 The buggy address belongs to the object at ffff8881154ec9c0 which belongs to the cache se_sess_cache of size 352 The buggy address is located 176 bytes inside of 352-byte region [ffff8881154ec9c0, ffff8881154ecb20) The buggy address belongs to the page: page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0 flags: 0x2fff000000010200(slab|head) raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400 raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc Cc: Mike Christie <mchristi@redhat.com> Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.org Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04scsi: target: compare full CHAP_A Algorithm stringsDavid Disseldorp1-1/+1
[ Upstream commit 9cef2a7955f2754257a7cddedec16edae7b587d0 ] RFC 2307 states: For CHAP [RFC1994], in the first step, the initiator MUST send: CHAP_A=<A1,A2...> Where A1,A2... are proposed algorithms, in order of preference. ... For the Algorithm, as stated in [RFC1994], one value is required to be implemented: 5 (CHAP with MD5) LIO currently checks for this value by only comparing a single byte in the tokenized Algorithm string, which means that any value starting with a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by comparing the entire tokenized string. Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.de Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05scsi: target/tcmu: Fix queue_cmd_ring() declarationBart Van Assche1-1/+1
[ Upstream commit e7f411049f5164ee6db6c3434c07302846f09990 ] This patch does not change any functionality but avoids that sparse complains about the queue_cmd_ring() function and its callers. Fixes: 6fd0ce79724d ("tcmu: prep queue_cmd_ring to be used by unmap wq") Reviewed-by: David Disseldorp <ddiss@suse.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-10scsi: target: core: Do not overwrite CDB byte 1Bodo Stroesser1-21/+0
[ Upstream commit 27e84243cb63601a10e366afe3e2d05bb03c1cb5 ] passthrough_parse_cdb() - used by TCMU and PSCSI - attepts to reset the LUN field of SCSI-2 CDBs (bits 5,6,7 of byte 1). The current code is wrong as for newer commands not having the LUN field it overwrites relevant command bits (e.g. for SECURITY PROTOCOL IN / OUT). We think this code was unnecessary from the beginning or at least it is no longer useful. So we remove it entirely. Link: https://lore.kernel.org/r/12498eab-76fd-eaad-1316-c2827badb76a@ts.fujitsu.com Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-06scsi: target: cxgbit: Fix cxgbit_fw4_ack()Bart Van Assche1-1/+2
commit fc5b220b2dcf8b512d9bd46fd17f82257e49bf89 upstream. Use the pointer 'p' after having tested that pointer instead of before. Fixes: 5cadafb236df ("target/cxgbit: Fix endianness annotations") Cc: Varun Prakash <varun@chelsio.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191023202150.22173-1-bvanassche@acm.org Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-16scsi: target/iblock: Fix overrun in WRITE SAME emulationRoman Bolshakov1-1/+1
[ Upstream commit 5676234f20fef02f6ca9bd66c63a8860fce62645 ] WRITE SAME corrupts data on the block device behind iblock if the command is emulated. The emulation code issues (M - 1) * N times more bios than requested, where M is the number of 512 blocks per real block size and N is the NUMBER OF LOGICAL BLOCKS specified in WRITE SAME command. So, for a device with 4k blocks, 7 * N more LBAs gets written after the requested range. The issue happens because the number of 512 byte sectors to be written is decreased one by one while the real bios are typically from 1 to 8 512 byte sectors per bio. Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6") Cc: <stable@vger.kernel.org> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-16scsi: target/core: Use the SECTOR_SHIFT constantBart Van Assche2-3/+2
[ Upstream commit 80b045b385cfef10939c913fbfeb19ce5491c1f2 ] Instead of duplicating the SECTOR_SHIFT definition from <linux/blkdev.h>, use it. This patch does not change any functionality. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-10scsi: target: tcmu: avoid use-after-free after command timeoutDmitry Fomichev1-2/+7
[ Upstream commit a86a75865ff4d8c05f355d1750a5250aec89ab15 ] In tcmu_handle_completion() function, the variable called read_len is always initialized with a value taken from se_cmd structure. If this function is called to complete an expired (timed out) out command, the session command pointed by se_cmd is likely to be already deallocated by the target core at that moment. As the result, this access triggers a use-after-free warning from KASAN. This patch fixes the code not to touch se_cmd when completing timed out TCMU commands. It also resets the pointer to se_cmd at the time when the TCMU_CMD_BIT_EXPIRED flag is set because it is going to become invalid after calling target_complete_cmd() later in the same function, tcmu_check_expired_cmd(). Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Acked-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supportedMaurizio Lombardi1-8/+8
[ Upstream commit 5dd6c49339126c2c8df2179041373222362d6e49 ] If the CHAP_A value is not supported, the chap_server_open() function should free the auth_protocol pointer and set it to NULL, or we will leave a dangling pointer around. [ 66.010905] Unsupported CHAP_A value [ 66.011660] Security negotiation failed. [ 66.012443] iSCSI Login negotiation failed. [ 68.413924] general protection fault: 0000 [#1] SMP PTI [ 68.414962] CPU: 0 PID: 1562 Comm: targetcli Kdump: loaded Not tainted 4.18.0-80.el8.x86_64 #1 [ 68.416589] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 68.417677] RIP: 0010:__kmalloc_track_caller+0xc2/0x210 Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10scsi: tcmu: fix use after freeXiubo Li1-1/+2
[ Upstream commit 40d883b091758472c79b81fa1c0e0347e24a9cff ] Fixes: a94a2572b977 ("scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23scsi: target/iscsi: Avoid iscsit_release_commands_from_conn() deadlockBart Van Assche1-2/+2
commit 32e36bfbcf31452a854263e7c7f32fbefc4b44d8 upstream. When using SCSI passthrough in combination with the iSCSI target driver then cmd->t_state_lock may be obtained from interrupt context. Hence, all code that obtains cmd->t_state_lock from thread context must disable interrupts first. This patch avoids that lockdep reports the following: WARNING: inconsistent lock state 4.18.0-dbg+ #1 Not tainted -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. iscsi_ttx/1800 [HC1[1]:SC0[2]:HE0:SE0] takes: 000000006e7b0ceb (&(&cmd->t_state_lock)->rlock){?...}, at: target_complete_cmd+0x47/0x2c0 [target_core_mod] {HARDIRQ-ON-W} state was registered at: lock_acquire+0xd2/0x260 _raw_spin_lock+0x32/0x50 iscsit_close_connection+0x97e/0x1020 [iscsi_target_mod] iscsit_take_action_for_connection_exit+0x108/0x200 [iscsi_target_mod] iscsi_target_rx_thread+0x180/0x190 [iscsi_target_mod] kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 irq event stamp: 1281 hardirqs last enabled at (1279): [<ffffffff970ade79>] __local_bh_enable_ip+0xa9/0x160 hardirqs last disabled at (1281): [<ffffffff97a008a5>] interrupt_entry+0xb5/0xd0 softirqs last enabled at (1278): [<ffffffff977cd9a1>] lock_sock_nested+0x51/0xc0 softirqs last disabled at (1280): [<ffffffffc07a6e04>] ip6_finish_output2+0x124/0xe40 [ipv6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cmd->t_state_lock)->rlock); <Interrupt> lock(&(&cmd->t_state_lock)->rlock);
2019-02-27scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comesXiubo Li1-27/+61
[ Upstream commit a94a2572b97744d3a35a1996df0e5cf6b2461a4a ] Currently there is one cmd timeout timer and one qfull timer for each udev, and whenever any new command is coming in we will update the cmd timer or qfull timer. For some corner cases the timers are always working only for the ringbuffer's and full queue's newest cmd. That's to say the timer won't be fired even if one cmd has been stuck for a very long time and the deadline is reached. This fix will keep the cmd/qfull timers to be pended for the oldest cmd in ringbuffer and full queue, and will update them with the next cmd's deadline only when the old cmd's deadline is reached or removed from the ringbuffer and full queue. Signed-off-by: Xiubo Li <xiubli@redhat.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-23scsi: target/core: Use kmem_cache_free() instead of kfree()Wei Yongjun1-1/+1
commit 8b2db98e814a5ec45e8800fc22ca9000ae0a517b upstream. memory allocated by kmem_cache_alloc() should be freed using kmem_cache_free(), not kfree(). Fixes: ad669505c4e9 ("scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enough") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-26scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enoughBart Van Assche2-11/+30
[ Upstream commit ad669505c4e9db9af9faeb5c51aa399326a80d91 ] A session must only be released after all code that accesses the session structure has finished. Make sure that this is the case by introducing a new command counter per session that is only decremented after the .release_cmd() callback has finished. This patch fixes the following crash: BUG: KASAN: use-after-free in do_raw_spin_lock+0x1c/0x130 Read of size 4 at addr ffff8801534b16e4 by task rmdir/14805 CPU: 16 PID: 14805 Comm: rmdir Not tainted 4.18.0-rc2-dbg+ #5 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 do_raw_spin_lock+0x1c/0x130 _raw_spin_lock_irqsave+0x52/0x60 srpt_set_ch_state+0x27/0x70 [ib_srpt] srpt_disconnect_ch+0x1b/0xc0 [ib_srpt] srpt_close_session+0xa8/0x260 [ib_srpt] target_shutdown_sessions+0x170/0x180 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x200 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9c/0x110 [configfs] config_item_put+0x26/0x30 [configfs] configfs_rmdir+0x3b8/0x510 [configfs] vfs_rmdir+0xb3/0x1e0 do_rmdir+0x262/0x2c0 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-26scsi: target: use consistent left-aligned ASCII INQUIRY dataDavid Disseldorp1-5/+12
[ Upstream commit 0de263577de5d5e052be5f4f93334e63cc8a7f0b ] spc5r17.pdf specifies: 4.3.1 ASCII data field requirements ASCII data fields shall contain only ASCII printable characters (i.e., code values 20h to 7Eh) and may be terminated with one or more ASCII null (00h) characters. ASCII data fields described as being left-aligned shall have any unused bytes at the end of the field (i.e., highest offset) and the unused bytes shall be filled with ASCII space characters (20h). LIO currently space-pads the T10 VENDOR IDENTIFICATION and PRODUCT IDENTIFICATION fields in the standard INQUIRY data. However, the PRODUCT REVISION LEVEL field in the standard INQUIRY data as well as the T10 VENDOR IDENTIFICATION field in the INQUIRY Device Identification VPD Page are zero-terminated/zero-padded. Fix this inconsistency by using space-padding for all of the above fields. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-22scsi: target: iscsi: cxgbit: fix csk leakVarun Prakash1-1/+4
[ Upstream commit ed076c55b359cc9982ca8b065bcc01675f7365f6 ] In case of arp failure call cxgbit_put_csk() to free csk. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-22scsi: target: iscsi: cxgbit: fix csk leakVarun Prakash1-3/+20
[ Upstream commit 801df68d617e3cb831f531c99fa6003620e6b343 ] csk leak can happen if a new TCP connection gets established after cxgbit_accept_np() returns, to fix this leak free remaining csk in cxgbit_free_np(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-22Revert "scsi: target: iscsi: cxgbit: fix csk leak"Sasha Levin1-4/+1
This reverts commit c9cef2c71a89a2c926dae8151f9497e72f889315. A wrong commit message was used for the stable commit because of a human error (and duplicate commit subject lines). This patch reverts this error, and the following patches add the two upstream commits. Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13scsi: target: iscsi: cxgbit: add missing spin_lock_init()Varun Prakash1-0/+1
[ Upstream commit 9e6371d3c6913ff1707fb2c0274c9925f7aaef80 ] Add missing spin_lock_init() for cdev->np_lock. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13scsi: target: iscsi: cxgbit: fix csk leakVarun Prakash1-1/+4
[ Upstream commit 801df68d617e3cb831f531c99fa6003620e6b343 ] csk leak can happen if a new TCP connection gets established after cxgbit_accept_np() returns, to fix this leak free remaining csk in cxgbit_free_np(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-13scsi: target: Fix target_wait_for_sess_cmds breakage with active signalsNicholas Bellinger1-2/+2
commit 38fe73cc2c96fbc9942b07220f2a4f1bab37392d upstream. With the addition of commit 00d909a10710 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted") in v4.19-rc, it incorrectly assumes no signals will be pending for task_struct executing the normal session shutdown and I/O quiesce code-path. For example, iscsi-target and iser-target issue SIGINT to all kthreads as part of session shutdown. This has been the behaviour since day one. As-is when signals are pending with se_cmds active in se_sess->sess_cmd_list, wait_event_interruptible_lock_irq_timeout() returns a negative number and immediately kills the machine because of the do while (ret <= 0) loop that was added in commit 00d909a107 to spin while backend I/O is taking any amount of extended time (say 30 seconds) to complete. Here's what it looks like in action with debug plus delayed backend I/O completion: [ 4951.909951] se_sess: 000000003e7e08fa before target_wait_for_sess_cmds [ 4951.914600] target_wait_for_sess_cmds: signal_pending: 1 [ 4951.918015] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 0 [ 4951.921639] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 1 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 2 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 3 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 4 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 5 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 6 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 7 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 8 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 9 ... followed by the usual RCU CPU stalls and deadlock. There was never a case pre commit 00d909a107 where wait_for_complete(&se_cmd->cmd_wait_comp) was able to be interrupted, so to address this for v4.19+ moving forward go ahead and use wait_event_lock_irq_timeout() instead so new code works with all fabric drivers. Also for commit 00d909a107, fix a minor regression in target_release_cmd_kref() to only wake_up the new se_sess->cmd_list_wq only when shutdown has actually been triggered via se_sess->sess_tearing_down. Fixes: 00d909a10710 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted") Cc: <stable@vger.kernel.org> # v4.19+ Cc: Bart Van Assche <bvanassche@acm.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-21scsi: target: iscsi: Use bin2hex instead of a re-implementationVincent Pelletier1-12/+3
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-21scsi: target: iscsi: Use hex2bin instead of a re-implementationVincent Pelletier1-16/+14
This change has the following effects, in order of descreasing importance: 1) Prevent a stack buffer overflow 2) Do not append an unnecessary NULL to an anyway binary buffer, which is writing one byte past client_digest when caller is: chap_string_to_hex(client_digest, chap_r, strlen(chap_r)); The latter was found by KASAN (see below) when input value hes expected size (32 hex chars), and further analysis revealed a stack buffer overflow can happen when network-received value is longer, allowing an unauthenticated remote attacker to smash up to 17 bytes after destination buffer (16 bytes attacker-controlled and one null). As switching to hex2bin requires specifying destination buffer length, and does not internally append any null, it solves both issues. This addresses CVE-2018-14633. Beyond this: - Validate received value length and check hex2bin accepted the input, to log this rejection reason instead of just failing authentication. - Only log received CHAP_R and CHAP_C values once they passed sanity checks. ================================================================== BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod] Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021 CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G O 4.17.8kasan.sess.connops+ #2 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod] Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? chap_string_to_hex+0x32/0x60 [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd chap_string_to_hex+0x32/0x60 [iscsi_target_mod] chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod] ? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod] ? ftrace_caller_op_ptr+0xe/0xe ? __orc_find+0x6f/0xc0 ? unwind_next_frame+0x231/0x850 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? ret_from_fork+0x35/0x40 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? deref_stack_reg+0xd0/0xd0 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? is_module_text_address+0xa/0x11 ? kernel_text_address+0x4c/0x110 ? __save_stack_trace+0x82/0x100 ? ret_from_fork+0x35/0x40 ? save_stack+0x8c/0xb0 ? 0xffffffffc1660000 ? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod] ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? process_one_work+0x35c/0x640 ? worker_thread+0x66/0x5d0 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod] ? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod] chap_main_loop+0x172/0x570 [iscsi_target_mod] ? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod] ? rx_data+0xd6/0x120 [iscsi_target_mod] ? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod] ? cyc2ns_read_begin.part.2+0x90/0x90 ? _raw_spin_lock_irqsave+0x25/0x50 ? memcmp+0x45/0x70 iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod] ? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod] ? del_timer+0xe0/0xe0 ? memset+0x1f/0x40 ? flush_sigqueue+0x29/0xd0 iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod] ? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod] process_one_work+0x35c/0x640 worker_thread+0x66/0x5d0 ? flush_rcu_work+0x40/0x40 kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x17fffc000000000() raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00 ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00 >ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00 ^ ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2 ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 ================================================================== Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-12scsi: iscsi: target: Don't use stack buffer for scatterlistLaura Abbott1-8/+14
Fedora got a bug report of a crash with iSCSI: kernel BUG at include/linux/scatterlist.h:143! ... RIP: 0010:iscsit_do_crypto_hash_buf+0x154/0x180 [iscsi_target_mod] ... Call Trace: ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod] iscsit_get_rx_pdu+0x4cd/0xa90 [iscsi_target_mod] ? native_sched_clock+0x3e/0xa0 ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod] iscsi_target_rx_thread+0x81/0xf0 [iscsi_target_mod] kthread+0x120/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 This is a BUG_ON for using a stack buffer with a scatterlist. There are two cases that trigger this bug. Switch to using a dynamically allocated buffer for one case and do not assign a NULL buffer in another case. Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-30scsi: iscsi: target: Fix conn_ops double freeMike Christie3-75/+77
If iscsi_login_init_conn fails it can free conn_ops. __iscsi_target_login_thread will then call iscsi_target_login_sess_out which will also free it. This fixes the problem by organizing conn allocation/setup into parts that are needed through the life of the conn and parts that are only needed for the login. The free functions then release what was allocated in the alloc functions. With this patch we have: iscsit_alloc_conn/iscsit_free_conn - allocs/frees the conn we need for the entire life of the conn. iscsi_login_init_conn/iscsi_target_nego_release - allocs/frees the parts of the conn that are only needed during login. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-30scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values ↵Vincent Pelletier1-5/+3
fails Fixes a use-after-free reported by KASAN when later iscsi_target_login_sess_out gets called and it tries to access conn->sess->se_sess: Disabling lock debugging due to kernel taint iSCSI Login timeout on Network Portal [::]:3260 iSCSI Login negotiation failed. ================================================================== BUG: KASAN: use-after-free in iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] Read of size 8 at addr ffff880109d070c8 by task iscsi_np/980 CPU: 1 PID: 980 Comm: iscsi_np Tainted: G O 4.17.8kasan.sess.connops+ #4 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] iscsi_target_login_thread+0x1086/0x1710 [iscsi_target_mod] ? __sched_text_start+0x8/0x8 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] ? __kthread_parkme+0xcc/0x100 ? parse_args.cold.14+0xd3/0xd3 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 Allocated by task 980: kasan_kmalloc+0xbf/0xe0 kmem_cache_alloc_trace+0x112/0x210 iscsi_target_login_thread+0x816/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Freed by task 980: __kasan_slab_free+0x125/0x170 kfree+0x90/0x1d0 iscsi_target_login_thread+0x1577/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 The buggy address belongs to the object at ffff880109d06f00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 456 bytes inside of 512-byte region [ffff880109d06f00, ffff880109d07100) The buggy address belongs to the page: page:ffffea0004274180 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 flags: 0x17fffc000008100(slab|head) raw: 017fffc000008100 0000000000000000 0000000000000000 00000001000c000c raw: dead000000000100 dead000000000200 ffff88011b002e00 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880109d06f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880109d07000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880109d07080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880109d07100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880109d07180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> [rebased against idr/ida changes and to handle ret review comments from Matthew] Signed-off-by: Mike Christie <mchristi@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info()Varun Prakash1-4/+4
DDP programming happens in data path and it can fail because of lack of resources so use pr_debug() instead of pr_info() for this case. Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-26Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds3-34/+21
Pull IDA updates from Matthew Wilcox: "A better IDA API: id = ida_alloc(ida, GFP_xxx); ida_free(ida, id); rather than the cumbersome ida_simple_get(), ida_simple_remove(). The new IDA API is similar to ida_simple_get() but better named. The internal restructuring of the IDA code removes the bitmap preallocation nonsense. I hope the net -200 lines of code is convincing" * 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits) ida: Change ida_get_new_above to return the id ida: Remove old API test_ida: check_ida_destroy and check_ida_alloc test_ida: Convert check_ida_conv to new API test_ida: Move ida_check_max test_ida: Move ida_check_leaf idr-test: Convert ida_check_nomem to new API ida: Start new test_ida module target/iscsi: Allocate session IDs from an IDA iscsi target: fix session creation failure handling drm/vmwgfx: Convert to new IDA API dmaengine: Convert to new IDA API ppc: Convert vas ID allocation to new IDA API media: Convert entity ID allocation to new IDA API ppc: Convert mmu context allocation to new IDA API Convert net_namespace to new IDA API cb710: Convert to new IDA API rsxx: Convert to new IDA API osd: Convert to new IDA API sd: Convert to new IDA API ...
2018-08-22target/iscsi: Allocate session IDs from an IDAMatthew Wilcox3-30/+10
Since the session is never looked up by ID, we can use the more space-efficient IDA instead of the IDR. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-22iscsi target: fix session creation failure handlingMike Christie1-14/+21
The problem is that iscsi_login_zero_tsih_s1 sets conn->sess early in iscsi_login_set_conn_values. If the function fails later like when we alloc the idr it does kfree(sess) and leaves the conn->sess pointer set. iscsi_login_zero_tsih_s1 then returns -Exyz and we then call iscsi_target_login_sess_out and access the freed memory. This patch has iscsi_login_zero_tsih_s1 either completely setup the session or completely tear it down, so later in iscsi_target_login_sess_out we can just check for it being set to the connection. Cc: stable@vger.kernel.org Fixes: 0957627a9960 ("iscsi-target: Fix sess allocation leak in...") Signed-off-by: Mike Christie <mchristi@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds20-433/+508
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 17:11:51 +0300