summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
6 daysscsi: target: Reset t_task_cdb pointer in error caseAndrey Vatoropin1-0/+1
commit 5053eab38a4c4543522d0c320c639c56a8b59908 upstream. If allocation of cmd->t_task_cdb fails, it remains NULL but is later dereferenced in the 'err' path. In case of error, reset NULL t_task_cdb value to point at the default fixed-size buffer. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 9e95fb805dc0 ("scsi: target: Fix NULL pointer dereference") Cc: stable@vger.kernel.org Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru> Reviewed-by: Mike Christie <michael.christie@oracle.com> Link: https://patch.msgid.link/20251118084014.324940-1-a.vatoropin@crpt.ru Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
6 daysscsi: target: Do not write NUL characters into ASCII configfs outputBart Van Assche1-1/+0
[ Upstream commit c03b55f235e283cae49c88b9602fd11096b92eba ] NUL characters are not allowed in ASCII configfs output. Hence this patch. Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://patch.msgid.link/20251027184639.3501254-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show()Hamza Mahfooz1-0/+3
commit e6965188f84a7883e6a0d3448e86b0cf29b24dfc upstream. If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and we attempt to dereference it in tcm_loop_tpg_address_show() we will get a segfault, see below for an example. So, check tl_hba->sh before dereferencing it. Unable to allocate struct scsi_host BUG: kernel NULL pointer dereference, address: 0000000000000194 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop] ... Call Trace: <TASK> configfs_read_iter+0x12d/0x1d0 [configfs] vfs_read+0x1b5/0x300 ksys_read+0x6f/0xf0 ... Cc: stable@vger.kernel.org Fixes: 2628b352c3d4 ("tcm_loop: Show address of tpg in configfs") Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Allen Pais <apais@linux.microsoft.com> Link: https://patch.msgid.link/1762370746-6304-1-git-send-email-hamzamahfooz@linux.microsoft.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19scsi: target: target_core_configfs: Add length check to avoid buffer overflowWang Haoran1-1/+1
commit 27e06650a5eafe832a90fd2604f0c5e920857fae upstream. A buffer overflow arises from the usage of snprintf to write into the buffer "buf" in target_lu_gp_members_show function located in /drivers/target/target_core_configfs.c. This buffer is allocated with size LU_GROUP_NAME_BUF (256 bytes). snprintf(...) formats multiple strings into buf with the HBA name (hba->hba_group.cg_item), a slash character, a devicename (dev-> dev_group.cg_item) and a newline character, the total formatted string length may exceed the buffer size of 256 bytes. Since snprintf() returns the total number of bytes that would have been written (the length of %s/%sn ), this value may exceed the buffer length (256 bytes) passed to memcpy(), this will ultimately cause function memcpy reporting a buffer overflow error. An additional check of the return value of snprintf() can avoid this buffer overflow. Reported-by: Wang Haoran <haoranwangsec@gmail.com> Reported-by: ziiiro <yuanmingbuaa@gmail.com> Signed-off-by: Wang Haoran <haoranwangsec@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28scsi: target: core: Generate correct identifiers for PR OUT transport IDsMaurizio Lombardi3-25/+60
[ Upstream commit 6e0f6aa44b68335df404a2df955055f416b5f2aa ] Fix target_parse_pr_out_transport_id() to return a string representing the transport ID in a human-readable format (e.g., naa.xxxxxxxx...) for various SCSI protocol types (SAS, FCP, SRP, SBP). Previously, the function returned a pointer to the raw binary buffer, which was incorrectly compared against human-readable strings, causing comparisons to fail. Now, the function writes a properly formatted string into a buffer provided by the caller. The output format depends on the transport protocol: * SAS: 64-bit identifier, "naa." prefix. * FCP: 64-bit identifier, colon separated values. * SBP: 64-bit identifier, no prefix. * SRP: 128-bit identifier, "0x" prefix. * iSCSI: IQN string. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20250714133738.11054-1-mlombard@redhat.com Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-10scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port()Maurizio Lombardi1-1/+3
[ Upstream commit d8ab68bdb294b09a761e967dad374f2965e1913f ] The function core_scsi3_decode_spec_i_port(), in its error code path, unconditionally calls core_scsi3_lunacl_undepend_item() passing the dest_se_deve pointer, which may be NULL. This can lead to a NULL pointer dereference if dest_se_deve remains unset. SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg Unable to handle kernel paging request at virtual address dfff800000000012 Call trace: core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P) core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod] core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod] target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod] Fix this by adding a NULL check before calling core_scsi3_lunacl_undepend_item() Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20250612101556.24829-1-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04scsi: target: iscsi: Fix timeout on deleted connectionDmitry Bogdanov1-1/+1
[ Upstream commit 7f533cc5ee4c4436cee51dc58e81dfd9c3384418 ] NOPIN response timer may expire on a deleted connection and crash with such logs: Did not receive response to NOPIN on CID: 0, failing connection for I_T Nexus (null),i,0x00023d000125,iqn.2017-01.com.iscsi.target,t,0x3d BUG: Kernel NULL pointer dereference on read at 0x00000000 NIP strlcpy+0x8/0xb0 LR iscsit_fill_cxn_timeout_err_stats+0x5c/0xc0 [iscsi_target_mod] Call Trace: iscsit_handle_nopin_response_timeout+0xfc/0x120 [iscsi_target_mod] call_timer_fn+0x58/0x1f0 run_timer_softirq+0x740/0x860 __do_softirq+0x16c/0x420 irq_exit+0x188/0x1c0 timer_interrupt+0x184/0x410 That is because nopin response timer may be re-started on nopin timer expiration. Stop nopin timer before stopping the nopin response timer to be sure that no one of them will be re-started. Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20241224101757.32300-1-d.bogdanov@yadro.com Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-09scsi: target: Fix WRITE_SAME No Data Buffer crashMike Christie3-0/+13
commit ccd3f449052449a917a3e577d8ba0368f43b8f29 upstream. In newer version of the SBC specs, we have a NDOB bit that indicates there is no data buffer that gets written out. If this bit is set using commands like "sg_write_same --ndob" we will crash in target_core_iblock/file's execute_write_same handlers when we go to access the se_cmd->t_data_sg because its NULL. This patch adds a check for the NDOB bit in the common WRITE SAME code because we don't support it. And, it adds a check for zero SG elements in each handler in case the initiator tries to send a normal WRITE SAME with no data buffer. Link: https://lore.kernel.org/r/20220628022325.14627-2-michael.christie@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-01scsi: target: core: Fix null-ptr-deref in target_alloc_device()Wang Hai1-1/+1
[ Upstream commit fca6caeb4a61d240f031914413fcc69534f6dc03 ] There is a null-ptr-deref issue reported by KASAN: BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod] ... kasan_report+0xb9/0xf0 target_alloc_device+0xbc4/0xbe0 [target_core_mod] core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod] target_core_init_configfs+0x205/0x420 [target_core_mod] do_one_initcall+0xdd/0x4e0 ... entry_SYSCALL_64_after_hwframe+0x76/0x7e In target_alloc_device(), if allocing memory for dev queues fails, then dev will be freed by dev->transport->free_device(), but dev->transport is not initialized at that time, which will lead to a null pointer reference problem. Fixing this bug by freeing dev with hba->backend->ops->free_device(). Fixes: 1526d9f10c61 ("scsi: target: Make state_list per CPU") Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20241011113444.40749-1-wanghai38@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01genetlink: hold RCU in genlmsg_mcast()Eric Dumazet1-1/+1
[ Upstream commit 56440d7ec28d60f8da3bfa09062b3368ff9b16db ] While running net selftests with CONFIG_PROVE_RCU_LIST=y I saw one lockdep splat [1]. genlmsg_mcast() uses for_each_net_rcu(), and must therefore hold RCU. Instead of letting all callers guard genlmsg_multicast_allns() with a rcu_read_lock()/rcu_read_unlock() pair, do it in genlmsg_mcast(). This also means the @flags parameter is useless, we need to always use GFP_ATOMIC. [1] [10882.424136] ============================= [10882.424166] WARNING: suspicious RCU usage [10882.424309] 6.12.0-rc2-virtme #1156 Not tainted [10882.424400] ----------------------------- [10882.424423] net/netlink/genetlink.c:1940 RCU-list traversed in non-reader section!! [10882.424469] other info that might help us debug this: [10882.424500] rcu_scheduler_active = 2, debug_locks = 1 [10882.424744] 2 locks held by ip/15677: [10882.424791] #0: ffffffffb6b491b0 (cb_lock){++++}-{3:3}, at: genl_rcv (net/netlink/genetlink.c:1219) [10882.426334] #1: ffffffffb6b49248 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg (net/netlink/genetlink.c:61 net/netlink/genetlink.c:57 net/netlink/genetlink.c:1209) [10882.426465] stack backtrace: [10882.426805] CPU: 14 UID: 0 PID: 15677 Comm: ip Not tainted 6.12.0-rc2-virtme #1156 [10882.426919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [10882.427046] Call Trace: [10882.427131] <TASK> [10882.427244] dump_stack_lvl (lib/dump_stack.c:123) [10882.427335] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) [10882.427387] genlmsg_multicast_allns (net/netlink/genetlink.c:1940 (discriminator 7) net/netlink/genetlink.c:1977 (discriminator 7)) [10882.427436] l2tp_tunnel_notify.constprop.0 (net/l2tp/l2tp_netlink.c:119) l2tp_netlink [10882.427683] l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:253) l2tp_netlink [10882.427748] genl_family_rcv_msg_doit (net/netlink/genetlink.c:1115) [10882.427834] genl_rcv_msg (net/netlink/genetlink.c:1195 net/netlink/genetlink.c:1210) [10882.427877] ? __pfx_l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:186) l2tp_netlink [10882.427927] ? __pfx_genl_rcv_msg (net/netlink/genetlink.c:1201) [10882.427959] netlink_rcv_skb (net/netlink/af_netlink.c:2551) [10882.428069] genl_rcv (net/netlink/genetlink.c:1220) [10882.428095] netlink_unicast (net/netlink/af_netlink.c:1332 net/netlink/af_netlink.c:1357) [10882.428140] netlink_sendmsg (net/netlink/af_netlink.c:1901) [10882.428210] ____sys_sendmsg (net/socket.c:729 (discriminator 1) net/socket.c:744 (discriminator 1) net/socket.c:2607 (discriminator 1)) Fixes: 33f72e6f0c67 ("l2tp : multicast notification to the registered listeners") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Cc: Tom Parkin <tparkin@katalix.com> Cc: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20241011171217.3166614-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17scsi: target: Fix SELinux error when systemd-modules loads the target moduleMaurizio Lombardi1-0/+12
[ Upstream commit 97a54ef596c3fd24ec2b227ba8aaf2cf5415e779 ] If the systemd-modules service loads the target module, the credentials of that userspace process will be used to validate the access to the target db directory. SELinux will prevent it, reporting an error like the following: kernel: audit: type=1400 audit(1676301082.205:4): avc: denied { read } for pid=1020 comm="systemd-modules" name="target" dev="dm-3" ino=4657583 scontext=system_u:system_r:systemd_modules_load_t:s0 tcontext=system_u:object_r:targetd_etc_rw_t:s0 tclass=dir permissive=0 Fix the error by using the kernel credentials to access the db directory Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20240215143944.847184-2-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01scsi: target: core: Add TMF to tmr_list handlingDmitry Bogdanov2-5/+4
[ Upstream commit 83ab68168a3d990d5ff39ab030ad5754cbbccb25 ] An abort that is responded to by iSCSI itself is added to tmr_list but does not go to target core. A LUN_RESET that goes through tmr_list takes a refcounter on the abort and waits for completion. However, the abort will be never complete because it was not started in target core. Unable to locate ITT: 0x05000000 on CID: 0 Unable to locate RefTaskTag: 0x05000000 on CID: 0. wait_for_tasks: Stopping tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop wait for tasks: tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop ... INFO: task kworker/0:2:49 blocked for more than 491 seconds. task:kworker/0:2 state:D stack: 0 pid: 49 ppid: 2 flags:0x00000800 Workqueue: events target_tmr_work [target_core_mod] Call Trace: __switch_to+0x2c4/0x470 _schedule+0x314/0x1730 schedule+0x64/0x130 schedule_timeout+0x168/0x430 wait_for_completion+0x140/0x270 target_put_cmd_and_wait+0x64/0xb0 [target_core_mod] core_tmr_lun_reset+0x30/0xa0 [target_core_mod] target_tmr_work+0xc8/0x1b0 [target_core_mod] process_one_work+0x2d4/0x5d0 worker_thread+0x78/0x6c0 To fix this, only add abort to tmr_list if it will be handled by target core. Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20240111125941.8688-1-d.bogdanov@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10scsi: target: core: Fix deadlock due to recursive lockingJunxiao Bi1-7/+4
[ Upstream commit a154f5f643c6ecddd44847217a7a3845b4350003 ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb460bcb ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()Konstantin Shelekhin1-27/+27
[ Upstream commit 801f287c93ff95582b0a2d2163f12870a2f076d4 ] The function lio_target_nacl_info_show() uses sprintf() in a loop to print details for every iSCSI connection in a session without checking for the buffer length. With enough iSCSI connections it's possible to overflow the buffer provided by configfs and corrupt the memory. This patch replaces sprintf() with sysfs_emit_at() that checks for buffer boundries. Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Link: https://lore.kernel.org/r/20230722152657.168859-2-k.shelekhin@yadro.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-28scsi: target: iscsi: Prevent login threads from racing between each otherMaurizio Lombardi1-1/+3
[ Upstream commit 2a737d3b8c792400118d6cf94958f559de9c5e59 ] The tpg->np_login_sem is a semaphore that is used to serialize the login process when multiple login threads run concurrently against the same target portal group. The iscsi_target_locate_portal() function finds the tpg, calls iscsit_access_np() against the np_login_sem semaphore and saves the tpg pointer in conn->tpg; If iscsi_target_locate_portal() fails, the caller will check for the conn->tpg pointer and, if it's not NULL, then it will assume that iscsi_target_locate_portal() called iscsit_access_np() on the semaphore. Make sure that conn->tpg gets initialized only if iscsit_access_np() was successful, otherwise iscsit_deaccess_np() may end up being called against a semaphore we never took, allowing more than one thread to access the same tpg. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20230508162219.1731964-4-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24scsi: target: iscsit: Free cmds before session freeDmitry Bogdanov1-3/+3
[ Upstream commit d8990b5a4d065f38f35d69bcd627ec5a7f8330ca ] Commands from recovery entries are freed after session has been closed. That leads to use-after-free at command free or NPE with such call trace: Time2Retain timer expired for SID: 1, cleaning up iSCSI session. BUG: kernel NULL pointer dereference, address: 0000000000000140 RIP: 0010:sbitmap_queue_clear+0x3a/0xa0 Call Trace: target_release_cmd_kref+0xd1/0x1f0 [target_core_mod] transport_generic_free_cmd+0xd1/0x180 [target_core_mod] iscsit_free_cmd+0x53/0xd0 [iscsi_target_mod] iscsit_free_connection_recovery_entries+0x29d/0x320 [iscsi_target_mod] iscsit_close_session+0x13a/0x140 [iscsi_target_mod] iscsit_check_post_dataout+0x440/0x440 [iscsi_target_mod] call_timer_fn+0x24/0x140 Move cleanup of recovery enrties to before session freeing. Reported-by: Forza <forza@tnonline.net> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-7-michael.christie@oracle.com Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11scsi: target: iscsit: Fix TAS handling during conn cleanupMike Christie1-7/+9
[ Upstream commit cc79da306ebb2edb700c3816b90219223182ac3c ] Fix a bug added in commit f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race"). If CMD_T_TAS is set on the se_cmd we must call iscsit_free_cmd() to do the last put on the cmd and free it, because the connection is down and we will not up sending the response and doing the put from the normal I/O path. Add a check for CMD_T_TAS in iscsit_release_commands_from_conn() so we now detect this case and run iscsit_free_cmd(). Fixes: f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race") Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-9-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11scsi: target: Fix multiple LUN_RESET handlingMike Christie2-3/+24
[ Upstream commit 673db054d7a2b5a470d7a25baf65956d005ad729 ] This fixes a bug where an initiator thinks a LUN_RESET has cleaned up running commands when it hasn't. The bug was added in commit 51ec502a3266 ("target: Delete tmr from list before processing"). The problem occurs when: 1. We have N I/O cmds running in the target layer spread over 2 sessions. 2. The initiator sends a LUN_RESET for each session. 3. session1's LUN_RESET loops over all the running commands from both sessions and moves them to its local drain_task_list. 4. session2's LUN_RESET does not see the LUN_RESET from session1 because the commit above has it remove itself. session2 also does not see any commands since the other reset moved them off the state lists. 5. sessions2's LUN_RESET will then complete with a successful response. 6. sessions2's inititor believes the running commands on its session are now cleaned up due to the successful response and cleans up the running commands from its side. It then restarts them. 7. The commands do eventually complete on the backend and the target starts to return aborted task statuses for them. The initiator will either throw a invalid ITT error or might accidentally lookup a new task if the ITT has been reallocated already. Fix the bug by reverting the patch, and serialize the execution of LUN_RESETs and Preempt and Aborts. Also prevent us from waiting on LUN_RESETs in core_tmr_drain_tmr_list, because it turns out the original patch fixed a bug that was not mentioned. For LUN_RESET1 core_tmr_drain_tmr_list can see a second LUN_RESET and wait on it. Then the second reset will run core_tmr_drain_tmr_list and see the first reset and wait on it resulting in a deadlock. Fixes: 51ec502a3266 ("target: Delete tmr from list before processing") Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-8-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30scsi: target: iscsi: Fix an error message in iscsi_check_key()Maurizio Lombardi1-5/+7
[ Upstream commit 6cc55c969b7ce8d85e09a636693d4126c3676c11 ] The first half of the error message is printed by pr_err(), the second half is printed by pr_debug(). The user will therefore see only the first part of the message and will miss some useful information. Link: https://lore.kernel.org/r/20230214141556.762047-1-mlombard@redhat.com Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-09scsi: target: core: Fix warning on RT kernelsMaurizio Lombardi1-2/+2
[ Upstream commit 84ed64b1a7a7fcd507598dee7708c1f225123711 ] Calling spin_lock_irqsave() does not disable the interrupts on realtime kernels, remove the warning and replace assert_spin_locked() with lockdep_assert_held(). Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230110125310.55884-1-mlombard@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-09fix iov_iter_bvec() "direction" argumentAl Viro1-2/+2
[ Upstream commit b676668d99155e6859d99bbf2df18b3f03851902 ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-26scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()Yang Yingliang1-1/+2
[ Upstream commit bc68e428d4963af0201e92159629ab96948f0893 ] If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(). The 'tl_hba' will be freed in tcm_loop_release_adapter(), so it don't need goto error label in this case. Fixes: 3703b2c5d041 ("[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221115015042.3652261-1-yangyingliang@huawei.com Reviewed-by: Mike Christie <michael.chritie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09target: remove an incorrect unmap zeroes data deductionChristoph Hellwig1-1/+0
[ Upstream commit 179d8609d8424529e95021df939ed7b0b82b37f1 ] For block devices, the SCSI target drivers implements UNMAP as calls to blkdev_issue_discard, which does not guarantee zeroing just because Write Zeroes is supported. Note that this does not affect the file backed path which uses fallocate to punch holes. Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09scsi: target: tcmu: Avoid holding XArray lock when calling lock_pageBodo Stroesser1-5/+5
[ Upstream commit 325d5c5fb216674296f3902a8902b942da3adc5b ] In tcmu_blocks_release(), lock_page() is called to prevent a race causing possible data corruption. Since lock_page() might sleep, calling it while holding XArray lock is a bug. To fix this, replace the xas_for_each() call with xa_for_each_range(). Since the latter does its own handling of XArray locking, the xas_lock() and xas_unlock() calls around the original loop are no longer necessary. The switch to xa_for_each_range() slows down the loop slightly. This is acceptable since tcmu_blocks_release() is not relevant for performance. Link: https://lore.kernel.org/r/20220517192913.21405-1-bostroesser@gmail.com Fixes: bb9b9eb0ae2e ("scsi: target: tcmu: Fix possible data corruption") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09scsi: target: tcmu: Fix possible data corruptionXiaoguang Wang1-3/+37
[ Upstream commit bb9b9eb0ae2e9d3f6036f0ad907c3a83dcd43485 ] When tcmu_vma_fault() gets a page successfully, before the current context completes page fault procedure, find_free_blocks() may run and call unmap_mapping_range() to unmap the page. Assume that when find_free_blocks() initially completes and the previous page fault procedure starts to run again and completes, then one truncated page has been mapped to userspace. But note that tcmu_vma_fault() has gotten a refcount for the page so any other subsystem won't be able to use the page unless the userspace address is unmapped later. If another command subsequently runs and needs to extend dbi_thresh it may reuse the corresponding slot for the previous page in data_bitmap. Then though we'll allocate new page for this slot in data_area, no page fault will happen because we have a valid map and the real request's data will be lost. Filesystem implementations will also run into this issue but they usually lock the page when vm_operations_struct->fault gets a page and unlock the page after finish_fault() completes. For truncate filesystems lock pages in truncate_inode_pages() to protect against racing wrt. page faults. To fix this possible data corruption scenario we can apply a method similar to the filesystems. For pages that are to be freed, tcmu_blocks_release() locks and unlocks. Make tcmu_vma_fault() also lock found page under cmdr_lock. At the same time, since tcmu_vma_fault() gets an extra page refcount, tcmu_blocks_release() won't free pages if pages are in page fault procedure, which means it is safe to call tcmu_blocks_release() before unmap_mapping_range(). With these changes tcmu_blocks_release() will wait for all page faults to be completed before calling unmap_mapping_range(). And later, if unmap_mapping_range() is called, it will ensure stale mappings are removed. Link: https://lore.kernel.org/r/20220421023735.9018-1-xiaoguang.wang@linux.alibaba.com Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20scsi: target: tcmu: Fix possible page UAFXiaoguang Wang1-1/+2
[ Upstream commit a6968f7a367f128d120447360734344d5a3d5336 ] tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not take refcount properly and just returns page pointer. When tcmu_try_get_data_page() returns, the returned page may have been freed by tcmu_blocks_release(). We need to get_page() under cmdr_lock to avoid concurrent tcmu_blocks_release(). Link: https://lore.kernel.org/r/20220311132206.24515-1-xiaoguang.wang@linux.alibaba.com Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16scsi: target: iscsi: Make sure the np under each tpg is uniqueZouMingzhe1-0/+3
[ Upstream commit a861790afaa8b6369eee8a88c5d5d73f5799c0c6 ] iscsit_tpg_check_network_portal() has nested for_each loops and is supposed to return true when a match is found. However, the tpg loop will still continue after existing the tpg_np loop. If this tpg_np is not the last the match value will be changed. Break the outer loop after finding a match and make sure the np under each tpg is unique. Link: https://lore.kernel.org/r/20220111054742.19582-1-mingzhe.zou@easystack.cn Signed-off-by: ZouMingzhe <mingzhe.zou@easystack.cn> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25scsi: target: Fix alua_tg_pt_gps_count trackingMike Christie1-1/+0
[ Upstream commit 1283c0d1a32bb924324481586b5d6e8e76f676ba ] We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's still accessed via configfs. Its release must go through the normal configfs/refcount process. The max alua_tg_pt_gps_count check should probably have been done in core_alua_allocate_tg_pt_gp(), but with the current code userspace could have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff. Then it could have deleted a group with an ID set, and then set the ID for that extra group and it would work ok. It's unlikely, but just in case this patch continues to allow that type of behavior, and just fixes the kfree() while in use bug. Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25scsi: target: Fix ordered tag handlingMike Christie3-22/+57
[ Upstream commit ed1227e080990ffec5bf39006ec8a57358e6689a ] This patch fixes the following bugs: 1. If there are multiple ordered cmds queued and multiple simple cmds completing, target_restart_delayed_cmds() could be called on different CPUs and each instance could start a ordered cmd. They could then run in different orders than they were queued. 2. target_restart_delayed_cmds() and target_handle_task_attr() can race where: 1. target_handle_task_attr() has passed the simple_cmds == 0 check. 2. transport_complete_task_attr() then decrements simple_cmds to 0. 3. transport_complete_task_attr() runs target_restart_delayed_cmds() and it does not see any cmds on the delayed_cmd_list. 4. target_handle_task_attr() adds the cmd to the delayed_cmd_list. The cmd will then end up timing out. 3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute them out of order, because target_handle_task_attr() will hit that simple_cmds check first and return false for all ordered cmds sent. 4. We run target_restart_delayed_cmds() after every cmd completion, so if there is more than 1 simple cmd running, we start executing ordered cmds after that first cmd instead of waiting for all of them to complete. 5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older cmds have completed, and not just simple. 6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock for every cmd completion when ordered cmds are almost never used. Just replacing that lock with an atomic increases IOPs by up to 10% when completions are spread over multiple CPUs and there are multiple sessions/ mqs/thread accessing the same device. This patch moves the queued delayed handling to a per device work to serialze the cmd executions for each device and adds a new counter to track HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to determine when to run the work on the completion path. Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18scsi: target: core: Remove from tmr_list during LUN unlinkDmitry Bogdanov2-23/+24
[ Upstream commit 12b6fcd0ea7f3cb7c3b34668fc678779924123ae ] Currently TMF commands are removed from de_device.dev_tmf_list at the very end of se_cmd lifecycle. However, se_lun unlinks from se_cmd upon a command status (response) being queued in transport layer. This means that LUN and backend device can be deleted in the meantime and a panic will occur: target_tmr_work() cmd->se_tfo->queue_tm_rsp(cmd); // send abort_rsp to a wire transport_lun_remove_cmd(cmd) // unlink se_cmd from se_lun - // - // - // - <<<--- lun remove <<<--- core backend device remove - // - // - // - qlt_handle_abts_completion() tfo->free_mcmd() transport_generic_free_cmd() target_put_sess_cmd() core_tmr_release_req() { if (dev) { // backend device, can not be null spin_lock_irqsave(&dev->se_tmr_lock, flags); //<<<--- CRASH Call Trace: NIP [c000000000e1683c] _raw_spin_lock_irqsave+0x2c/0xc0 LR [c00800000e433338] core_tmr_release_req+0x40/0xa0 [target_core_mod] Call Trace: (unreliable) 0x0 target_put_sess_cmd+0x2a0/0x370 [target_core_mod] transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod] tcm_qla2xxx_complete_mcmd+0x28/0x50 [tcm_qla2xxx] process_one_work+0x2c4/0x5c0 worker_thread+0x88/0x690 For the iSCSI protocol this is easily reproduced: - Send some SCSI sommand - Send Abort of that command over iSCSI - Remove LUN on target - Send next iSCSI command to acknowledge the Abort_Response - Target panics There is no need to keep the command in tmr_list until response completion, so move the removal from tmr_list from the response completion to the response queueing when the LUN is unlinked. Move the removal from state list too as it is a subject to the same race condition. Link: https://lore.kernel.org/r/20211018135753.15297-1-d.bogdanov@yadro.com Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6") Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Link: https://lore.kernel.org/r/20210920183206.17477-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14scsi: target: Fix the pgr/alua_support_store functionsMaurizio Lombardi1-12/+20
Commit 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") introduced support for changeable alua_support and pgr_support target attributes. These can only be changed if the backstore is user-backed, otherwise the kernel returns -EINVAL. This triggers a warning in the targetcli/rtslib code when performing a target restore that includes non-userbacked backstores: # targetctl restore Storage Object block/storage1: Cannot set attribute alua_support: [Errno 22] Invalid argument, skipped Storage Object block/storage1: Cannot set attribute pgr_support: [Errno 22] Invalid argument, skipped Fix this warning by returning an error code only if we are really going to flip the PGR/ALUA bit in the transport_flags field, otherwise we will do nothing and return success. Return ENOSYS instead of EINVAL if the pgr/alua attributes can not be changed, this way it will be possible for userspace to understand if the operation failed because an invalid value has been passed to strtobool() or because the attributes are fixed. Fixes: 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") Link: https://lore.kernel.org/r/20210906151809.52811-1-mlombard@redhat.com Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds10-111/+243
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, qla2xxx, target, smartpqi, lpfc, mpt3sas). The core change causing the most churn was replacing the command request field request with a macro, allowing us to offset map to it and remove the redundant field; the same was also done for the tag field. The most impactful change is the final removal of scsi_ioctl, which has been deprecated for over a decade" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits) scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1 scsi: ufs: ufs-exynos: Fix static checker warning scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI scsi: lpfc: Use the proper SCSI midlayer interfaces for PI scsi: lpfc: Copyright updates for 14.0.0.1 patches scsi: lpfc: Update lpfc version to 14.0.0.1 scsi: lpfc: Add bsg support for retrieving adapter cmf data scsi: lpfc: Add cmf_info sysfs entry scsi: lpfc: Add debugfs support for cm framework buffers scsi: lpfc: Add support for maintaining the cm statistics buffer scsi: lpfc: Add rx monitoring statistics scsi: lpfc: Add support for the CM framework scsi: lpfc: Add cmfsync WQE support scsi: lpfc: Add support for cm enablement buffer scsi: lpfc: Add cm statistics buffer support scsi: lpfc: Add EDC ELS support scsi: lpfc: Expand FPIN and RDF receive logging scsi: lpfc: Add MIB feature enablement support scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware scsi: fc: Add EDC ELS definition ...
2021-08-18scsi: target: Fix sense key for invalid EXTENDED COPY requestSergey Samoylenko1-11/+15
TCM fails to pass the following tests in libiscsi: SCSI.ExtendedCopy.DescrType SCSI.ExtendedCopy.DescrLimits SCSI.ExtendedCopy.ParamHdr SCSI.ExtendedCopy.ValidSegDescr SCSI.ExtendedCopy.ValidTgtDescr The xcopy code always returns the same NOT READY sense key for all detected errors. Change the sense key for invalid requests to ILLEGAL REQUEST, and for aborted transfers to COPY ABORTED. Link: https://lore.kernel.org/r/20210803145410.80147-3-s.samoylenko@yadro.com Fixes: d877d7275be3 ("target: Fix a deadlock between the XCOPY code and iSCSI session shutdown") Reviewed-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-18scsi: target: Allows backend drivers to fail with specific sense codesSergey Samoylenko1-3/+12
Currently, backend drivers can fail I/O with SAM_STAT_CHECK_CONDITION which gets us TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE. Add a new helper that allows backend drivers to fail with specific sense codes. This is based on a patch from Mike Christie <michael.christie@oracle.com>. Cc: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20210803145410.80147-2-s.samoylenko@yadro.com Reviewed-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-18scsi: target: pscsi: Fix possible null-pointer dereference in ↵Tuo Li1-9/+9
pscsi_complete_cmd() The return value of transport_kmap_data_sg() is assigned to the variable buf: buf = transport_kmap_data_sg(cmd); And then it is checked: if (!buf) { This indicates that buf can be NULL. However, it is dereferenced in the following statements: if (!(buf[3] & 0x80)) buf[3] |= 0x80; if (!(buf[2] & 0x80)) buf[2] |= 0x80; To fix these possible null-pointer dereferences, dereference buf and call transport_kunmap_data_sg() only when buf is not NULL. Link: https://lore.kernel.org/r/20210810040414.248167-1-islituo@gmail.com Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Tuo Li <islituo@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-12Merge branch '5.14/scsi-fixes' into 5.15/scsi-stagingMartin K. Petersen2-19/+18
Resolve mpt3sas conflict between 5.14/scsi-fixes and 5.15/scsi-staging reported by sfr. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-12scsi: tcm_loop: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche1-2/+2
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-51-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03scsi: target: core: Drop unnecessary se_cmd ASC/ASCQ membersDavid Disseldorp2-64/+55
These members are only used for ALUA sense detail propagation, which can just as easily be done via sense_reason_t. Link: https://lore.kernel.org/r/20210728115353.2396-4-ddiss@suse.de Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03scsi: target: sbp: Drop incorrect ASC/ASCQ usageDavid Disseldorp1-2/+2
The se_cmd scsi_asc and scsi_ascq members are only used for tracking ALUA SCSI sense detail between target_core_alua and translate_sense_reason(), so they're effectively always zero here. Link: https://lore.kernel.org/r/20210728115353.2396-3-ddiss@suse.de Cc: Chris Boot <bootc@bootc.net> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03scsi: target: core: Avoid using lun_tg_pt_gp after unlockDavid Disseldorp1-5/+5
core_alua_state_lba_dependent() currently uses lun->lun_tg_pt_gp without holding the lun_tg_pt_gp_lock. The lock is taken in the caller, so obtain the needed tg_pt_gp_id there instead. Link: https://lore.kernel.org/r/20210728115353.2396-2-ddiss@suse.de Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03scsi: target: tcmu: Add new feature KEEP_BUFBodo Stroesser1-11/+139
When running command pipelining for WRITE direction commands (e.g. tape device write), userspace sends cmd completion to cmd ring before processing write data. In that case userspace has to copy data before sending completion, because cmd completion also implicitly releases the data buffer in data area. The new feature KEEP_BUF allows userspace to optionally keep the buffer after completion by setting new bit TCMU_UFLAG_KEEP_BUF in tcmu_cmd_entry_hdr->uflags. In that case buffer has to be released explicitly by writing the cmd_id to new action item free_kept_buf. All kept buffers are released during reset_ring and if userspace closes uio device (tcmu_release). Link: https://lore.kernel.org/r/20210713175021.20103-1-bostroesser@gmail.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-29scsi: core: Rename CONFIG_BLK_SCSI_REQUEST to CONFIG_SCSI_COMMONChristoph Hellwig1-1/+1
CONFIG_BLK_SCSI_REQUEST is rather misnamed as it enables building a small amount of code shared by the SCSI initiator, target, and consumers of the scsi_request passthrough API. Rename it and also allow building it as a module. [mkp: add module license] Link: https://lore.kernel.org/r/20210724072033.1284840-20-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27Merge 5.14-rc3 into driver-core-nextGreg Kroah-Hartman2-19/+18
We need the driver-core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27scsi: target: Remove redundant assignment to variable retColin Ian King3-4/+4
The variable ret is being initialized with a value that is never read, the assignment is redundant and can be removed. Link: https://lore.kernel.org/r/20210721101519.42299-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unused value")
2021-07-21bus: Make remove callback return voidUwe Kleine-König1-3/+2
The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21scsi: target: Fix NULL dereference on XCOPY completionDavid Disseldorp1-1/+1
CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL. Link: https://lore.kernel.org/r/20210720225522.26291-1-ddiss@suse.de Fixes: 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") Cc: Lee Duncan <lduncan@suse.com> Cc: Mike Christie <michael.christie@oracle.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-19scsi: target: Fix protect handling in WRITE SAME(32)Dmitry Bogdanov1-18/+17
WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st byte instead of 10th byte. Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME") Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-09Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull more block updates from Jens Axboe: "A combination of changes that ended up depending on both the driver and core branch (and/or the IDE removal), and a few late arriving fixes. In detail: - Fix io ticks wrap-around issue (Chunguang) - nvme-tcp sock locking fix (Maurizio) - s390-dasd fixes (Kees, Christoph) - blk_execute_rq polling support (Keith) - blk-cgroup RCU iteration fix (Yu) - nbd backend ID addition (Prasanna) - Partition deletion fix (Yufen) - Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph) - Removal of now dead block request types due to IDE removal (Christoph) - Loop probing and control device cleanups (Christoph) - Device uevent fix (Christoph) - Misc cleanups/fixes (Tetsuo, Christoph)" * tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits) blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs block: fix the problem of io_ticks becoming smaller nvme-tcp: can't set sk_user_data without write_lock loop: remove unused variable in loop_set_status() block: remove the bdgrab in blk_drop_partitions block: grab a device refcount in disk_uevent s390/dasd: Avoid field over-reading memcpy() dasd: unexport dasd_set_target_state block: check disk exist before trying to add partition ubd: remove dead code in ubd_setup_common nvme: use return value from blk_execute_rq() block: return errors from blk_execute_rq() nvme: use blk_execute_rq() for passthrough commands block: support polling through blk_execute_rq block: remove REQ_OP_SCSI_{IN,OUT} block: mark blk_mq_init_queue_data static loop: rewrite loop_exit using idr_for_each_entry loop: split loop_lookup loop: don't allow deleting an unspecified loop device loop: move loop_ctl_mutex locking into loop_add ...
2021-07-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds18-98/+172
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, ibmvfc, megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with elx and mpi3mr being new drivers. The major core change is a rework to drop the status byte handling macros and the old bit shifted definitions and the rest of the updates are minor fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits) scsi: aha1740: Avoid over-read of sense buffer scsi: arcmsr: Avoid over-read of sense buffer scsi: ips: Avoid over-read of sense buffer scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe() scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame() scsi: elx: libefc: Fix less than zero comparison of a unsigned int scsi: elx: efct: Fix pointer error checking in debugfs init scsi: elx: efct: Fix is_originator return code type scsi: elx: efct: Fix link error for _bad_cmpxchg scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel() scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session() scsi: elx: efct: Fix error handling in efct_hw_init() scsi: elx: efct: Remove redundant initialization of variable lun scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected" scsi: lpfc: Fix build error in lpfc_scsi.c scsi: target: iscsi: Remove redundant continue statement scsi: qla4xxx: Remove redundant continue statement scsi: ppa: Switch to use module_parport_driver() scsi: imm: Switch to use module_parport_driver() scsi: mpt3sas: Fix error return value in _scsih_expander_add() ...
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-25 19:38:20 +0300