summaryrefslogtreecommitdiff
path: root/drivers/target/loopback
AgeCommit message (Collapse)AuthorFilesLines
2014-07-18scsi: use 64-bit LUNsHannes Reinecke1-1/+1
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-27tcm_loop: Fix memory leak in tcm_loop_submission_work error pathNicholas Bellinger1-0/+1
This patch fixes a tcm_loop_cmd descriptor memory leak in the tcm_loop_submission_work() error path, and would result in warnings about leaked tcm_loop_cmd_cache objects at module unload time. Go ahead and invoke kmem_cache_free() to release tl_cmd back to tcm_loop_cmd_cache before calling sc->scsi_done(). Reported-by: Sebastian Herbszt <herbszt@gmx.de> Tested-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-13Merge branch 'for-next' of ↵Linus Torvalds1-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Add support for T10 PI pass-through between vhost-scsi + virtio-scsi (MST + Paolo + MKP + nab) - Add support for T10 PI in qla2xxx target mode (Quinn + MKP + hch + nab, merged through scsi.git) - Add support for percpu-ida pre-allocation in qla2xxx target code (Quinn + nab) - A number of iser-target fixes related to hardening the network portal shutdown path (Sagi + Slava) - Fix response length residual handling for a number of control CDBs (Roland + Christophe V.) - Various iscsi RFC conformance fixes in the CHAP authentication path (Tejas and Calsoft folks + nab) - Return TASK_SET_FULL status for tcm_fc(FCoE) DataIn + Response failures (Vasu + Jun + nab) - Fix long-standing ABORT_TASK + session reset hang (nab) - Convert iser-initiator + iser-target to include T10 bytes into EDTL (Sagi + Or + MKP + Mike Christie) - Fix NULL pointer dereference regression related to XCOPY introduced in v3.15 + CC'ed to v3.12.y (nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (34 commits) target: Fix NULL pointer dereference for XCOPY in target_put_sess_cmd vhost-scsi: Include prot_bytes into expected data transfer length TARGET/sbc,loopback: Adjust command data length in case pi exists on the wire libiscsi, iser: Adjust data_length to include protection information scsi_cmnd: Introduce scsi_transfer_length helper target: Report correct response length for some commands target/sbc: Check that the LBA and number of blocks are correct in VERIFY target/sbc: Remove sbc_check_valid_sectors() Target/iscsi: Fix sendtargets response pdu for iser transport Target/iser: Fix a wrong dereference in case discovery session is over iser iscsi-target: Fix ABORT_TASK + connection reset iscsi_queue_req memory leak target: Use complete_all for se_cmd->t_transport_stop_comp target: Set CMD_T_ACTIVE bit for Task Management Requests target: cleanup some boolean tests target/spc: Simplify INQUIRY EVPD=0x80 tcm_fc: Generate TASK_SET_FULL status for response failures tcm_fc: Generate TASK_SET_FULL status for DataIN failures iscsi-target: Reject mutual authentication with reflected CHAP_C iscsi-target: Remove no-op from iscsit_tpg_del_portal_group iscsi-target: Fix CHAP_A parameter list handling ...
2014-06-12TARGET/sbc,loopback: Adjust command data length in case pi exists on the wireSagi Grimberg1-3/+12
In various areas of the code, it is assumed that se_cmd->data_length describes pure data. In case that protection information exists over the wire (protect bits is are on) the target core re-calculates the data length from the CDB and the backed device block size (instead of each transport peeking in the cdb). Modify loopback device to include protection information in the transferred data length (like other scsi transports). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra1-2/+2
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-07target: Pass in transport supported PI at session initializationNicholas Bellinger1-1/+1
In order to support local WRITE_INSERT + READ_STRIP operations for non PI enabled fabrics, the fabric driver needs to be able signal what protection offload operations are supported. This is done at session initialization time so the modes can be signaled by individual se_wwn + se_portal_group endpoints, as well as optionally across different transports on the same endpoint. For iser-target, set TARGET_PROT_ALL if the underlying ib_device has already signaled PI offload support, and allow this to be exposed via a new iscsit_transport->iscsit_get_sup_prot_ops() callback. For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode operation. For all other drivers, set TARGET_PROT_NORMAL to disable fabric level PI. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Add TFO->abort_task for aborted task resources releaseNicholas Bellinger1-0/+6
Now that TASK_ABORTED status is not generated for all cases by TMR ABORT_TASK + LUN_RESET, a new TFO->abort_task() caller is necessary in order to give fabric drivers a chance to unmap hardware / software resources before the se_cmd descriptor is released via the normal TFO->release_cmd() codepath. This patch adds TFO->aborted_task() in core_tmr_abort_task() in place of the original transport_send_task_abort(), and also updates all fabric drivers to implement this caller. The fabric drivers that include changes to perform cleanup via ->aborted_task() are: - iscsi-target - iser-target - srpt - tcm_qla2xxx The fabric drivers that currently set ->aborted_task() to NOPs are: - loopback - tcm_fc - usb-gadget - sbp-target - vhost-scsi For the latter five, there appears to be no additional cleanup required before invoking TFO->release_cmd() to release the se_cmd descriptor. v2 changes: - Move ->aborted_task() call into transport_cmd_finish_abort (Alex) Cc: Alex Leung <amleung21@yahoo.com> Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Vu Pham <vu@mellanox.com> Cc: Chris Boot <bootc@bootc.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/dif: Introduce protection-passthough-only modeSagi Grimberg1-0/+4
Some transports (iSCSI/iSER/SRP/FC) support hardware INSERT/STRIP capabilities while other transports like loopback/vhost-scsi need perform this is software. This patch allows fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC to signal the early LUN scan handling case where PROTECT CDB bits are set, but no fabric buffer has been provided. For transports which use generic new command these buffers have yet to be allocated. Also this way, target may support protection information against legacy initiators (writes are inserted and reads are stripped). (Only set prot_pto for loopback during early special case - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-19tcm_loop: Enable DIF/DIX modes in SCSI host LLDNicholas Bellinger1-2/+10
This patch updates tcm_loop_driver_probe() to set protection information using scsi_host_set_prot() and scsi_host_set_guard(), which currently enabled all modes of DIF/DIX protection, minus DIX TYPE0. Also, update tcm_loop_submission_work() to pass struct scsi_cmnd related protection into target_submit_cmd_map_sgls() during CDB dispatch. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target: Add protection SGLs to target_submit_cmd_map_sglsNicholas Bellinger1-1/+1
This patch adds support to target_submit_cmd_map_sgls() for accepting 'sgl_prot' + 'sgl_prot_count' parameters for DIF protection information. Note the passed parameters are stored at se_cmd->t_prot_sg and se_cmd->t_prot_nents respectively. Also, update tcm_loop and vhost-scsi fabrics usage of target_submit_cmd_map_sgls() to take into account the new parameters. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-10drivers: target: Mark functions as static in tcm_loop.cRashika Kheria1-4/+4
Mark functions tcm_loop_make_naa_tpg(), tcm_loop_drop_naa_tpg(), tcm_loop_make_scsi_hba() and tcm_loop_drop_scsi_hba() as static in loopback/tcm_loop.c because they are not used outside this file. This eliminates the following warning in loopback/tcm_loop.c: drivers/target/loopback/tcm_loop.c:1231:25: warning: no previous prototype for ‘tcm_loop_make_naa_tpg’ [-Wmissing-prototypes] drivers/target/loopback/tcm_loop.c:1276:6: warning: no previous prototype for ‘tcm_loop_drop_naa_tpg’ [-Wmissing-prototypes] drivers/target/loopback/tcm_loop.c:1308:16: warning: no previous prototype for ‘tcm_loop_make_scsi_hba’ [-Wmissing-prototypes] drivers/target/loopback/tcm_loop.c:1378:6: warning: no previous prototype for ‘tcm_loop_drop_scsi_hba’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-17tcm_loop: Implement target resetHannes Reinecke1-0/+26
Implement target reset by resetting the transport status. (nab: Remove unused ret in tcm_loop_target_reset) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-17tcm_loop: TCQ and command abort supportHannes Reinecke2-4/+69
Implement TCQ support, which enables us to do proper command abort, too. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-17tcm_loop: separate out tcm_loop_issue_tmrHannes Reinecke1-33/+50
No functional change. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-17tcm_loop: Implement transport offlineHannes Reinecke2-1/+56
Add attribute 'transport_status' to simulate link failure. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-17tcm_loop: Check for valid hba in tcm_loop_drop_nexus()Hannes Reinecke1-1/+4
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-17target: Remove TF_CIT_TMPL macroAndy Grover1-5/+5
Remove a lingering macro that just hid a dereference. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-11target: Update copyright ownership/year information to 2013Nicholas Bellinger1-1/+1
Update copyright ownership/year information for target-core, loopback, iscsi-target, tcm_qla2xx, vhost and iser-target. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-08target: make queue_tm_rsp() return voidJoern Engel1-2/+1
The return value wasn't checked by any of the callers. Assuming this is correct behaviour, we can simplify some code by not bothering to generate it. nab: Add srpt_queue_data_in() + srpt_queue_tm_rsp() nops around srpt_queue_response() void return Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-09tcm: switch to ->show_info()Al Viro1-5/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-07target: kill struct se_subsystem_devChristoph Hellwig1-1/+0
Simplify the code a lot by killing the superflous struct se_subsystem_dev. Instead se_device is allocated early on by the backend driver, which allocates it as part of its own per-device structure, borrowing the scheme that is for example used for inode allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-03tcm_loop: Convert I/O path to use target_submit_cmd_map_sglsNicholas Bellinger1-54/+8
This patch converts tcm_loop to use target_submit_cmd_map_sgls() for I/O submission and mapping of pre-allocated SGL memory from incoming scsi_cmnd -> se_cmd descriptors. This includes removing the original open-coded fabric uses of target core callers to support transport_generic_map_mem_to_cmd() between target_setup_cmd_from_cdb() and transport_handle_cdb_direct() logic. (v2: Use renamed target_submit_cmd_map_sgls) Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-18target: Simplify fabric sense data length handlingRoland Dreier1-6/+0
Every fabric driver has to supply a se_tfo->set_fabric_sense_len() method, just so iSCSI can return an offset of 2. However, every fabric driver is already allocating a sense buffer and passing it into the target core, either via transport_init_se_cmd() or target_submit_cmd(). So instead of having iSCSI pass the start of its sense buffer into the core and then later tell the core to skip the first 2 bytes, it seems easier for iSCSI just to do the offset of 2 when it passes the sense buffer into the core. Then we can drop the se_tfo->set_fabric_sense_len() everywhere, and just add a couple of lines of code to iSCSI to set the sense data length to the beginning of the buffer right before it sends it over the network. (nab: Remove .set_fabric_sense_len usage from tcm_qla2xxx_npiv_ops + change transport_get_sense_buffer to follow v3.6-rc6 code w/o ->set_fabric_sense_len usage) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-18target: Remove unused target_core_fabric_ops.get_fabric_sense_len methodRoland Dreier1-6/+0
There are no callers of se_tfo->get_fabric_sense_len(), so we should stop having every fabric driver implement it. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: remove transport_generic_process_writeChristoph Hellwig1-1/+1
Just call target_execute_cmd directly. Also, convert loopback, sbp, usb-gadget to use the newly exported target_execute_cmd(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17target: remove control CDB flagsChristoph Hellwig1-5/+4
We don't need three flags to classifiy the CDB as we can check for a NULL S/G list for a dataless command, and can infer from the absence of the data flag that we deal with a control CDB. Also remove the _SG_IO from the data CDB flag as all I/O is dont on S/G lists now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target: Rename target_allocate_tasks to target_setup_cmd_from_cdbAndy Grover1-2/+2
This patch renames a horribly misnamed function that no longer allocate tasks to something more descriptive for it's modern use in target core. (nab: Fix up ib_srpt to use this as well ahead of a target_submit_cmd conversion) Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-18loopback: Fix transport_generic_allocate_tasks error handlingNicholas Bellinger1-2/+1
This patch addresses a tcm_loop bug with transport_generic_allocate_tasks() return checking in tcm_loop_submission_work() where other non zero return codes (including -EBUSY for reservation conflicts) are incorrectly falling through to transport_generic_map_mem_to_cmd() -> transport_handle_cdb_direct(). This bug was introduced into target-pending/for-next-merge with the following for-3.4 commit: commit 16786454acec0e0e55e32d508b3058b32c1f23f3 Author: Christoph Hellwig <hch@infradead.org> Date: Thu Feb 2 17:04:42 2012 -0500 tcm_loop: switch to using transport_handle_cdb_direct Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-16target: remove obvious warningsJörn Engel1-2/+0
Get rid of a bunch of write-only variables. In a number of cases I suspect actual bugs to be present, so I left all of those for a second look. (nab: fix lio-core patch fuzz) Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-11target: Bump core version to v4.1.0-rc2-ml + fabric versionsNicholas Bellinger1-1/+1
Bump core version to v4.1.0-rc2-ml, and for versions from the following mainline fabric modules: loopback: v2.1-rc2 tcm_fc: v0.4 iscsi-target: v4.1.0-rc2 Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-11target: Drop unused legacy target_core_fabric_ops API callersNicholas Bellinger1-33/+0
This patch drops the following unused legacy API callers from target_core_fabric.h: *) TFO->fall_back_to_erl0() *) TFO->stop_session() *) TFO->sess_logged_in() *) TFO->is_state_remove() This patch also removes the stub usage in loopback, tcm_fc, iscsi_target, and ib_srpt fabric modules. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-26tcm_loop: Set residual field for SCSI commandsRoland Dreier1-0/+6
If the target core signals an over- or under-run, tcm_loop should call scsi_set_resid() to tell the SCSI midlayer about the residual data length. The difference can be seen by doing something like strace -eioctl sg_raw -r 1024 /dev/sda 8 0 0 0 1 0 > /dev/null and looking at the "resid=" part of the SG_IO ioctl -- after this patch, the field is correctly reported as 512. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-26tcm_loop: switch to using transport_handle_cdb_directChristoph Hellwig1-56/+56
Now that we use a workqueue for I/O submission there is no need to use transport_generic_handle_cdb_map any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-26tcm_loop: defer all command submissions to workqueueChristoph Hellwig2-41/+58
Apply the qla2xxx model of submitting all commands from a workqueue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-26tcm_loop: kill tcm_loop_allocate_core_cmdChristoph Hellwig1-88/+59
This function makes little sense as a separate abstraction as it's deeply interwinded with the control flow of its only caller. Merged it into tcm_loop_queuecommand after factoring out a helper to convert the task attribute representation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-26target: Add SCF_SCSI_TMR_CDB usage and drop se_tmr_req_cacheAndy Grover1-8/+5
Change the test for if a cmd is a tmr request to checking if SCF_SCSI_TMR_CDB (a new flag) is set in cmd->se_cmd_flags. Also remove se_tmr_req_cache usage in favor of kzalloc usage, and make core_tmr_alloc_req() return int + setup se_cmd->se_tmr_req directly and fix up various fabric module usages Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14tcm_loop: bump max_sectorsChristoph Hellwig2-14/+5
There is not reason to artifically limit max_sectors in tcm_loop, set it to UINT_MAX to allow stressing the large I/O handling in the target core using the loopback driver. Also remove various superflous defines hiding the values set in the host template. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: remove useless castsJörn Engel1-12/+6
A reader should spend an extra moment whenever noticing a cast, because either something special is going on that deserves extra attention or, as is all too often the case, the code is wrong. These casts, afaics, have all been useless. They cast a foo* to a foo*, cast a void* to the assigned type, cast a foo* to void*, before assigning it to a void* variable, etc. In a few cases I also removed an additional &...[0], which is equally useless. Lastly I added three FIXMEs where, to the best of my judgement, the code appears to have a bug. It would be good if someone could check these. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: header reshuffle, part2Christoph Hellwig1-6/+1
This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: remove the t_tasks_bidi se_cmd fieldChristoph Hellwig1-5/+3
And use a SCF_BIDI flag instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Drop config_item_name usage in fabric TFO->free_wwn()Nicholas Bellinger1-5/+4
This patch removes config_item_name() informational usage of TFO->free_wwn() treewide in loopback, tcm_fc, ib_srpt and tcm_vhost module code. Using v4 target_core_fabric_configfs.c logic, a fabric call for config_item_name() in TFO->drop_wwn() context returns NULL as target_fabric_drop_wwn() invoking config_item_put() -> config_group_put() will release fabric_port->port_wwn.wwn_group before the last config_item_put() -> TFO->drop_wwn() is invoked. Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Address legacy PYX_TRANSPORT_* return code breakageNicholas Bellinger1-21/+3
This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number of locations and addresses cases where transport_generic_request_failure() was returning the incorrect sense upon CHECK_CONDITION status after the v3.1 converson to use errno return codes. This includes the conversion of transport_generic_request_failure() to process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT before calling transport_send_check_condition_and_sense() to queue up response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response for these cases. transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have all been updated to set se_cmd->scsi_sense_reason and return errno codes universally upon failure. This includes cmd->scsi_sense_reason assignment in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code. Finally it updates fabric modules to remove the legacy usage, and for TFO->new_cmd_map() callers forwards return values outside of fabric code. iscsi-target has also been updated to remove a handful of special cases related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending() (v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from transport_generic_new_cmd, and re-add missing task->task_error_status assignment in transport_complete_task) Cc: Christoph Hellwig <hch@lst.de> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-02target: Make TFO->check_stop_free return free statusNicholas Bellinger1-2/+3
This patch converts target_core_fabric_ops->check_stop_free() usage in transport_cmd_check_stop() and associated fabric module usage to return '1' when the passed se_cmd has been released directly within ->check_stop_free(), or return '0' when the passed se_cmd has not been released. This addresses an issue where transport_cmd_finish_abort() -> transport_cmd_check_stop_to_fabric() was leaking descriptors during LUN_RESET for modules using ->check_stop_free(), but not directly releasing se_cmd in all cases. Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
2011-10-27tcm_loop: Add explict read buffer memset for SCF_SCSI_CONTROL_SG_IO_CDBNicholas Bellinger1-0/+18
This patch addresses an issue with buggy userspace code sending I/O via scsi-generic that does not explictly clear their associated read buffers. It adds an explict memset of the first SGL entry within tcm_loop_new_cmd_map() for SCF_SCSI_CONTROL_SG_IO_CDB payloads that are currently guaranteed to be a single SGL by target-core code. This issue is a side effect of the v3.1-rc1 merge to remove the extra memcpy between certain control CDB types using a contigious + cleared buffer in target-core, and performing a memcpy into the SGL list within tcm_loop. It was originally mainfesting itself by udev + scsi_id + scsi-generic not properly setting up the expected /dev/disk/by-id/ symlinks because the INQUIRY payload was containing extra bogus data preventing the proper NAA IEEE WWN from being parsed by userspace. Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24loopback: Prevent uninitialized use of tl_tpg in tcm_loop_queuecommandNicholas Bellinger1-0/+12
This patch fixes a bug with tcm_loop where performing a scsi_host rescan was causing an oops due to a received scsi_cmnd->device->id value not matching a previously configured tcm_loop_tpg entry in tcm_loop_hba->tl_hba_tpgs[] obtained from within tcm_loop_queuecommand() code. This fix adds an explict check for tcm_loop_tpg->tl_hba in order to ensure tcm_loop_make_naa_tpg() has already been invoked to initialize a given tcm_loop_tpg entry, and also adds an explict clear of tcm_loop_tpg->tl_hba from within the tcm_loop_drop_naa_tpg() release path. This bug was manifesting itself with the following OOPs: [176289.430909] BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 [176289.431337] IP: [<ffffffffa0395617>] transport_processing_thread+0x1e3/0x794 [target_core_mod] [176289.431399] PGD 22e9b067 PUD 23375067 PMD 0 [176289.431399] Oops: 0000 [#1] SMP [176289.431815] CPU 1 [176289.431815] Modules linked in: tcm_loop target_core_stgt target_core_pscsi target_core_file target_core_iblock target_core_mod crc32c ib_cm ib_sa ib_mad ib_core qla2xxx scsi_tgt configfs fcoe libfcoe libfc scsi_transport_fc ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod ata_piix libata e1000 mptspi mptscsih mptbase [last unloaded: target_core_mod] [176289.431815] [176289.431815] Pid: 12339, comm: LIO_iblock Tainted: G W 3.1.0-rc8+ [176289.431815] RIP: 0010:[<ffffffffa0395617>] [<ffffffffa0395617>] transport_processing_thread+0x1e3/0x794 [target_core_mod] [176289.431815] RSP: 0018:ffff880023bfbe10 EFLAGS: 00010283 [176289.431815] RAX: 0000000000000000 RBX: ffff88002d600040 RCX: ffff88002d600108 [176289.431815] RDX: ffff88000c9e50bc RSI: 0000000000000246 RDI: 0000000000000246 [176289.431815] RBP: ffff880023bfbee0 R08: ffff88002d600108 R09: 0000000000000000 [176289.431815] R10: ffff88002fc8cc80 R11: ffffffff81671b60 R12: ffff88002d600108 [176289.431815] R13: ffff88000c9e4f38 R14: ffff88000c9e50b8 R15: 0000000000000000 [176289.431815] FS: 0000000000000000(0000) GS:ffff88002fc80000(0000) knlGS:0000000000000000 [176289.431815] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [176289.431815] CR2: 0000000000000090 CR3: 000000002a33f000 CR4: 00000000000006e0 [176289.431815] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [176289.431815] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [176289.431815] Process LIO_iblock (pid: 12339, threadinfo ffff880023bfa000, task ffff88002a2e0000) [176289.431815] Stack: [176289.431815] 0000000000011280 0000000000000246 ffff88002a2e0000 ffff880023a58900 [176289.431815] ffff880023bfbed0 ffff880023bfa000 ffff880023bfa000 ffff88000c9e50d0 [176289.431815] ffff88000c9e50c0 ffff88000c9e50bc ffff880023bfa000 ffff880023bfbfd8 [176289.431815] Call Trace: [176289.431815] [<ffffffff81056657>] ? wake_up_bit+0x25/0x25 [176289.431815] [<ffffffffa0395434>] ? transport_handle_cdb_direct+0x92/0x92 [target_core_mod] [176289.431815] [<ffffffff8105619a>] kthread+0x7d/0x85 [176289.431815] [<ffffffff813cbcb4>] kernel_thread_helper+0x4/0x10 [176289.431815] [<ffffffff8105611d>] ? kthread_worker_fn+0x16d/0x16d [176289.431815] [<ffffffff813cbcb0>] ? gs_change+0x13/0x13 [176289.431815] Code: 67 05 00 00 41 8b 84 24 4c ff ff ff ff c8 83 f8 11 0f 87 f0 04 00 00 89 c0 ff 24 c5 b0 c6 39 a0 0f 0b eb fe 48 8b 83 d8 00 00 00 [176289.431815] RIP [<ffffffffa0395617>] transport_processing_thread+0x1e3/0x794 [target_core_mod] [176289.431815] RSP <ffff880023bfbe10> [176289.431815] CR2: 0000000000000090 [176295.041004] ---[ end trace 85dc6865b23b8f3e ]--- Reported-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: Have core_tmr_alloc_req() take an explicit GFP_xxx flagRoland Dreier1-1/+1
Testing in_interrupt() to know when sleeping is allowed is not really reliable (since eg it won't be true if the caller is holding a spinlock). Instead have the caller tell core_tmr_alloc_req() what GFP_xxx to use; every caller except tcm_qla2xxx can use GFP_KERNEL. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-24target: push session reinstatement out of transport_generic_free_cmdChristoph Hellwig1-2/+2
Push session reinstatement out of transport_generic_free_cmd into the only caller that actually needs it. Clean up transport_generic_free_cmd a bit, and remove the useless comment. I'd love to add a more useful kerneldoc comment for it, but as this point I'm still a bit confused in where it stands in the command release stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22target: Follow up core updates from AGrover and HCH (round 4)Andy Grover3-59/+47
This patch contains the squashed version of forth round series cleanups from Andy and Christoph following the post heavy lifting in the preceeding: 'Eliminate usage of struct se_mem' and 'Make all control CDBs scatter-gather' changes. This also includes a conversion of target core and the v3.0 mainline fabric modules (loopback and tcm_fc) to use pr_debug and the CONFIG_DYNAMIC_DEBUG infrastructure! These have been squashed into this third and final round for v3.1. target: Remove ifdeffed code in t_g_process_write target: Remove direct ramdisk code target: Rename task_sg_num to task_sg_nents target: Remove custom debug macros for pr_debug. Use pr_err(). target: Remove custom debug macros in mainline fabrics target: Set WSNZ=1 in block limits VPD. Abort if WRITE_SAME sectors = 0 target: Remove transport do_se_mem_map callback target: Further simplify transport_free_pages target: Redo task allocation return value handling target: Remove extra parentheses target: change alloc_task call to take *cdb, not *cmd (nab: Fix bogus struct file assignments in fd_do_readv and fd_do_writev) Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22target: Eliminate usage of struct se_memAndy Grover1-4/+1
Both backstores and fabrics use arrays of struct scatterlist to describe data buffers. However TCM used struct se_mems, basically a linked list of scatterlist entries. We are able to simplify the code by eliminating this intermediate data structure and just using struct scatterlist[] throughout. Also, moved attachment of task to cmd out of transport_generic_get_task and into allocate_control_task and allocate_data_tasks. The reasoning is that it's nonintuitive that get_task should automatically add it to the cmd's task list -- it should just return an allocated, initialized task. That's all it should do, based on the function's name, so either the function shouldn't do it, or the name should change to encapsulate the entire essence of what it does. (nab: Fix compile warnings in tcm_fc, and make transport_kmap_first_data_page honor sg->offset for SGLs from contigious memory with TCM_Loop, and fix control se_cmd descriptor memory leak) Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22loopback: Fix memory leak in tcm_loop_make_scsi_hba()Jesper Juhl1-9/+8
There is a memory leak in tcm_loop_make_scsi_hba(). If all the strstr() calls return NULL and we end up at return ERR_PTR(-EINVAL); then we'll be leaking the memory previously allocated to tl_hba as that variable goes out of scope. This patch should fix the leak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 20:15:28 +0300